arcat · web viewsection 10 14 36 interior signage display hidden notes to specifier. (don't...

SECTION 10 14 36INTERIOR SIGNAGE

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2003 - 2015 ARCAT, Inc. - All rights reserved

1 GENERAL

1.1 SECTION INCLUDES

1.1.1 Identification signage.

1.1.2 Cubicle signage.

1.1.3 Directional signage.

1.1.4 Regulatory signage.

1.1.5 Informational signage.

1.1.6 Activity / calendar signage.

1.1.7 Directory signs.

1.1.8 Dimensional characters.

1.1.9 Dry erase signage.

1.1.10 Dry erase coatings.

1.2 RELATED SECTIONS

1.2.1 Section 09 25 23 - Lime Based Plastering.

1.2.2 Section 09 70 00 - Wall Finishes.

1.2.3 Section 10 13 13 - Electronic Directories.

1.2.4 Section 10 14 16 - Plaques.

1.2.5 Section 10 14 23 - Panel Signage.

1.2.6 Section 12 59 00 - Systems Furniture.

1.3 REFERENCES

1.3.1 Americans with Disabilities Act (ADA).1.3.1.1 ATBCB ADAAG - Americans with Disabilities Act Accessibility Guidelines.

1.3.2 American National Standards Institute (ANSI):1.3.2.1 ANSI A117.1 - Accessible and Usable Buildings and Facilities.

10 14 36-1

1.3.3 ASTM International (ASTM):1.3.3.1 ASTM D 635 - Standard Test Method for Rate of Burning and/or Extent and

Time of Burning of Plastics in a Horizontal Position.1.3.3.2 ASTM D 1929 - Standard Test Method for Determining Ignition Temperature of

Plastics.1.3.3.3 ASTM E 84 - Standard Test Method for Surface Burning Characteristics of

Building Materials.1.3.3.4 ASTM E 2073 - Standard Test Method for Photopic Luminance of

Photoluminescent (Phosphorescent) Markings.

1.3.4 Underwriters Laboratory (UL):1.3.4.1 UL 94 - Tests for Flammability of Plastic Materials for Parts in Devices and

Appliances.1.3.4.2 UL 723 - Surface Burning Characteristics of Interior Finish Materials and

Systems.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Manufacturer's data sheets on each product to be used, including:1.4.2.1 Preparation instructions and recommendations.1.4.2.2 Storage and handling requirements and recommendations.1.4.2.3 Installation methods.

1.4.3 Shop Drawings: Detail drawings showing sizes, lettering, and graphics, construction details of each type of sign, and mounting details with appropriate fasteners for specific project substrates.

1.4.4 Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

1.4.5 Verification Samples: For each sign type and color specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

1.4.6 Manufacturer's Installation Instructions: Printed Installation Instructions for each signage system.

1.4.7 Signage Report: Signage report indicating signage sizes, lettering and construction.

1.5 DELIVERY, STORAGE, AND HANDLING

1.5.1 Deliver materials in unopened factory packaging.

1.5.2 Inspect materials at delivery to verify.

1.5.3 Store products in manufacturer's original packaging until ready for installation, in climate controlled location away from direct sunlight.

1.6 PROJECT CONDITIONS

1.6.1 Install products in an interior climate-controlled environment.

1.6.2 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.7 WARRANTY

10 14 36-2

1.7.1 Manufacturer's Standard Warranty: At project closeout, provide to Owner or Owners representative a copy of the manufacturer's standard limited warranty against manufacturing defect outlining the terms, conditions and exclusions from coverage.1.7.1.1 Warranty Period: Two years.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Inpro, which is located at: S80 W18766 Apollo Dr.; Muskego, WI 53150; Toll Free Tel: 800-222-5556; Tel: 262-679-9010; Fax: 262-679-9127; Email:request info ([email protected]); Web:www.inprocorp.com

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 SIGNAGE - GENERAL

2.2.1 Comply with all applicable provisions of the ADAAG, ANSI A117.1, and State and local authorities having jurisdiction.

2.2.2 If required text and graphics are not indicated in specification or on drawings, obtain Owner's instructions as to text and graphics prior to preparation of shop drawings.

2.2.3 Use manufacturer's standard pictograms wherever applicable.

2.2.4 Graphic Design:2.2.4.1 Text/Graphics Placement: Right justified.2.2.4.2 Text/Graphics Placement: Centered.2.2.4.3 Text/Graphics Placement: Left justified.2.2.4.4 Font: As indicated on the Contract Drawings.2.2.4.5 Font: Ariel.2.2.4.6 Font: Avant Garde.2.2.4.7 Font: Avenir2.2.4.8 Font: Century Gothic.2.2.4.9 Font: Eras.2.2.4.10 Font: Folio.2.2.4.11 Font: Franklin Gothic.2.2.4.12 Font: Frutiger.2.2.4.13 Font: Futura.2.2.4.14 Font: Gill Sans.2.2.4.15 Font: Helvetica.2.2.4.16 Font: Humanist.2.2.4.17 Font: Myriad.2.2.4.18 Font: News Gothic.2.2.4.19 Font: Optima.2.2.4.20 Font: Tahoma.2.2.4.21 Font: Univers.2.2.4.22 Graphics: None.2.2.4.23 Graphics: As indicated on the Contract Drawings.2.2.4.24 Graphics: As indicated in the Signage Schedule.2.2.4.25 Sign Face Color: _______________.2.2.4.26 Text and Graphics Color: _______________.2.2.4.27 Sign Dimensions: As Noted on the Contract Drawings.

10 14 36-3

2.2.5 Braille: Grade 2 Braille produced with the Raster Method, patented process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.

2.3 PERFORMANCE REQUIREMENTS - GENERAL

2.3.1 Provide photopolymer signage that conforms to the requirements of all regulatory agencies holding jurisdiction and the quality control of InPro SignScape.

2.3.2 Provide Glow in the Dark, photoluminescent material that complies with applicable provisions of ASTM E 2073 and DIN 67510. Photoluminescent material must have up to 8 hours of luminance.

2.3.3 Compliance:2.3.3.1 Comply with all applicable provisions of the ADA and ANSI A117.1.2.3.3.2 Character Proportion: Letters and numbers on signs must have a width-to-height

ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and 1:10.

2.3.3.3 Color Contrast: Characters and symbols must contrast with their background - either light characters on a dark background or dark characters on a light background.

2.3.3.4 Raised Characters or Symbols: Letters and numbers on signs must be raised 1/32 inch (0.8 mm) minimum and be sans serif characters. Raised characters or symbols must be at least 5/8 inch (16 mm) high, but no higher than 2 inches (50 mm). Symbols or pictograms on signs must be raised 1/32 inch (0.8 mm) minimum.

2.3.3.5 Symbols of Accessibility: Accessible facilities required to be identified, must use the international symbol of accessibility.

2.3.3.6 Braille: Grade II with accompanying text.

2.3.4 Fire Performance Characteristics:2.3.4.1 Provide photopolymer signage with surface burning characteristics that consist

of a flame spread of 75 and a smoke development of 120 when tested in accordance to UL 723 (ASTM E 84).

2.3.4.2 Self Extinguishing: Provide photopolymer signage with a CC1 classification for .060 inch thick material, when tested in accordance with the procedures in ASTM D 635, Standard Test Method for Rate of Burning and/or Extent and Time of Burning Plastics in a Horizontal Position.

2.3.4.3 Vertical Burn: Provide photopolymer material that is classified as 94V-2 for material .118 inches thick or greater and 94HB for material .118 inches thick or less when tested in accordance with UL 94, Tests for flammability pf Plastic Materials for Parts in Devices and Appliances.

2.3.4.4 Self Ignition Temperature: Provide photopolymer material that has a self ignition temperature of 800 degrees F (427 degrees C) when tested in accordance with ASTM D 1929.

2.4 IDENTIFICATION SIGNAGE

2.4.1 S110 Temporary Identification Signage: As manufactured by Inpro.2.4.1.1 Production Style: Sanparrel Series, applied graphics, tactile.

2.4.1.1.1 .060 inch (2.0 mm) sheet bonded with .040 inch (1 mm) sheet.2.4.1.1.2 Construction: Cut and assembled to create signage.

2.4.1.2 Production Style: Sanparrel Series, applied graphics, engraved.2.4.1.2.1 .040 inch (1 mm) sheet bonded to .060 inch (1.5 mm) sheet.2.4.1.2.2 Construction: Engraved to create signage.

2.4.1.3 Production Style: Photopolymer.2.4.1.3.1 Series: Clear PETG Series.

10 14 36-4

2.4.1.3.2 Interior photopolymer panels composed of .032 inch thick moisture resistant, non-glare nylon photo polymer on base.

2.4.1.3.3 Base Materials: Ultraviolet resistant clear PETG sign base.2.4.1.3.4 Construction: Panel must be single piece construction.2.4.1.3.5 Panel Thickness: 1/16 inch (1.5 mm).2.4.1.3.6 Panel Thickness: 1/8 inch (3 mm).2.4.1.3.7 Panel Thickness: 1/4 inch (6 mm).2.4.1.3.8 Series: Laminate PETG Series.2.4.1.3.9 .032 inch (.8 mm) thick moisture resistant, non-glare nylon photo polymer

bonded to base,2.4.1.3.10 Base Materials: .080 inch (2 mm) thick PETG and .029 inch thick laminate

base.2.4.1.3.11 Panel Thickness: 1/8 inch (3 mm).2.4.1.3.12 Series: Designer Series.2.4.1.3.13 .032 inch thick moisture resistant, non-glare nylon photo polymer with inner

layers and patterns selected by Architect.2.4.1.3.14 Overall Thickness: 1/8 inch to 1/2 inch (3.2 - 12.7 mm).2.4.1.3.15 Series: Aluminum Series - Interior.2.4.1.3.16 .032 inch (.8 mm) thick exterior grade synthetic rubber based polymer

integrally bonded base.2.4.1.3.17 Base Materials: .017 inch (.4 mm) aluminum alloy base.2.4.1.3.18 Signage is bonded to a 1/8 inch (3.2 mm) acrylic panel.2.4.1.3.19 Panel Thickness: 0.025 inches (.6 mm).2.4.1.3.20 Series: Aluminum Series - Exterior.2.4.1.3.21 .032 inch (.8 mm) thick exterior grade synthetic rubber based polymer

integrally bonded base.2.4.1.3.22 Base Materials: .017 inch (.4 mm) aluminum alloy base.2.4.1.3.23 Signage is bonded to a 1/8 inch (3.2 mm) polycarbonate panel.2.4.1.3.24 Panel Thickness: 0.017 inches (.4 mm).

2.4.1.4 Production Style: Digital graphics.2.4.1.4.1 .118 inch (1.5 mm) clear PETG sheet, back printed with UV curable inks.2.4.1.4.2 Backing: PETG is backed with 3 mil white laminate.2.4.1.4.3 Applied Graphics:2.4.1.4.4 Type: Printed with UV curable inks.2.4.1.4.5 Construction: Cut and assembled to create signage.

2.4.1.5 Production Style: Engraved plastics.2.4.1.5.1 Materials: .060 inch (1.5 mm) 2 ply material.2.4.1.5.2 Construction: Engraved to expose core (text) color.

2.4.2 S120 Permanent: As manufactured by Inpro.2.4.2.1 Production Style: Sanparrel Series, applied graphics, tactile.


2.4.2.2 Production Style: Photo polymer.2.4.2.2.1 Series: Clear PETG Series.2.4.2.2.2 Interior photopolymer panels composed of .032 inch thick moisture

resistant, non-glare nylon photo polymer on base.2.4.2.2.3 Base Materials: Ultraviolet resistant clear PETG sign base.2.4.2.2.4 Panel must be single piece construction.2.4.2.2.5 Panel Thickness: 1/16 inch (1.5 mm).2.4.2.2.6 Panel Thickness: 1/8 inch (3 mm).2.4.2.2.7 Panel Thickness: 1/4 inch (6 mm).2.4.2.2.8 Series: Laminate PETG Series.2.4.2.2.9 .032 inch thick moisture resistant, non-glare nylon photo polymer bonded

to base.2.4.2.2.10 Base Materials:.080 inch thick PETG and .029 inch thick laminate base.

10 14 36-5

2.4.2.2.11 Panel Thickness: 1/8 inch (3 mm).2.4.2.2.12 Series: Designer Series.2.4.2.2.13 .032 inch thick moisture resistant, non-glare nylon photo polymer with inner

layers and patterns selected by Architect.2.4.2.2.14 Overall Thickness: 1/8 inch to 1/2 inch (3-13 mm).2.4.2.2.15 Series: Aluminum Series - Interior.2.4.2.2.16 .032 inch (.8 mm) thick exterior grade synthetic rubber based polymer

integrally bonded to base.2.4.2.2.17 Base Materials: .017 inch (.4 mm) aluminum alloy base.2.4.2.2.18 Signage is bonded to a 1/8 inch (3 mm) acrylic panel.2.4.2.2.19 Panel Thickness: 0.025 inches (.6 mm).2.4.2.2.20 Series: Aluminum Series - Exterior.2.4.2.2.21 .032 inch (.8 mm) thick exterior grade synthetic rubber based polymer

integrally bonded to base.2.4.2.2.22 Base Materials: .017 inch (.4 mm) aluminum alloy base.2.4.2.2.23 Signage is bonded to a 1/8 inch (3 mm) polycarbonate panel.2.4.2.2.24 Panel Thickness: 0.017 inches (.4 mm).

2.4.3 S130 Slide Panel: As manufactured by Inpro.2.4.3.1 Production Style: Sanparrel Series, applied graphics, tactile.



resistant, non-glare nylon photo polymer on base.2.4.3.2.3 Base Materials: Ultraviolet resistant clear PETG sign base.2.4.3.2.4 Panel must be single piece construction.2.4.3.2.5 Panel Thickness: 1/8 inch (3 mm), Composed of 1/16 inch layer of

photopolymer bonded to PETG and 1/16 inch layer of PETG.2.4.3.2.6 Series: Laminate PETG Series.2.4.3.2.7 .032 inch thick moisture resistant, non-glare nylon photo polymer bonded

to base.2.4.3.2.8 Base Materials:.060 inch thick PETG and .029 inch thick laminate base.2.4.3.2.9 Panel Thickness: 1/8 inch (3 mm).2.4.3.2.10 Series: Designer Series.2.4.3.2.11 .032 inch thick moisture resistant, non-glare nylon photo polymer with inner




2.4.3.3 Production Style: Digital graphics.2.4.3.3.1 .060 inch (1.5 mm) clear PETG sheet, back printed with UV curable inks.2.4.3.3.2 Polycarbonate is backed with 3 mil white laminate2.4.3.3.3 Applied Graphics:2.4.3.3.4 Type: Tactile, surface bonded to .040 inch (1 mm) sheet.

10 14 36-6

2.4.3.3.5 Construction: Cut and assembled to create signage.

2.4.4 S140 Window: As manufactured by Inpro.2.4.4.1 Production Style: Sanparrel Series, applied graphics, tactile.


2.4.4.2 Production Style: Photo polymer, Clear PETG Series.2.4.4.2.1 Interior photopolymer panels composed of .032 inch thick moisture

resistant, non-glare nylon photo polymer on base with 1/16 inch (1.5 mm) spacer and backer using engraved 2-ply material

2.4.4.2.2 Base Materials: Ultraviolet resistant clear 1/16 inch (1.5 mm) PETG.

2.4.5 Construction:2.4.5.1 Panel Frames: Injection molded frame.2.4.5.2 Panel Frames: Extruded aluminum frame.2.4.5.3 Panel Frames: Extruded vinyl frame.2.4.5.4 Panel Frames: Unframed.2.4.5.5 Corner Type: Collections Styles, provide Corners with standard shapes and

sizes.2.4.5.5.1 Collection: Aspen.2.4.5.5.2 Collection: Barcelona.2.4.5.5.3 Collection: Florence.2.4.5.5.4 Collection: Madison.2.4.5.5.5 Collection: Madrid.2.4.5.5.6 Collection: Manchester.2.4.5.5.7 Collection: Phoenix.2.4.5.5.8 Collection: Rio.2.4.5.5.9 Collection: Savannah.2.4.5.5.10 Collection: Sedona.2.4.5.5.11 Collection: Seoul.2.4.5.5.12 Collection: Sydney.2.4.5.5.13 Collecton: Zurich.

2.4.5.6 Mounting: Double sided foam tape; provide double-sided foam tape to adhere unframed signage to clean, dry, well sealed substrates.

2.4.5.7 Mounting: Magnetic mounting strips to attach unframed signage to steel substrates.

2.4.5.8 Mounting: Screw mount unframed signage with exposed mounting fasteners. Fasteners to be located at each corner.

2.4.5.9 Mounting: Double sided foam tape and heavy duty adhesive to adhere larger signs to clean, dry, well sealed substrates.

2.5 CUBICLE MOUNT IDENTIFICATION SIGNS

2.5.1 S110C1: As manufactured by Inpro.2.5.1.1 Description: One piece construction, 4 inches H (102 mm) x 10 inches W (254

mm) for 2 inch (51 mm) cubicle partition.2.5.1.2 Production Style: Sanparrel Series, applied graphics, tactile.

2.5.1.2.1 .060 inch (1.5 mm) sheet bonded with .040 inch (1 mm) sheet.2.5.1.2.2 Construction: Cut and assembled to create signage.2.5.1.2.3 Panel is formed to create cubicle mount.

2.5.2 S110C2: As manufactured by Inpro.2.5.2.1 Description: Two piece construction, 2 inches H (51 mm) x 10 inches W (254

mm) for 2 inches (51 mm) cubicle partition.2.5.2.2 Production Style: Sanparrel Series, applied graphics, tactile (raised letter).


10 14 36-7


2.6 DIRECTIONAL SIGNAGE

2.6.1 S210 - Wall Mount Directional Signage: As manufactured by Inpro.2.6.1.1 Production Style: Sanparrel Series, Applied Graphics, Tactile.


2.6.1.2 Production Style: Sanparrel Series, Applied Graphics, Partial Inlay.2.6.1.2.1 .080 inch (2.0 mm) sheet engraved to receive .060 inch (1.5 mm) sheet.2.6.1.2.2 Construction: Cut and assembled to create signage.

2.6.1.3 Production Style: Sanparrel Series, Applied Graphics, Engraved.2.6.1.3.1 .040 inch (1 mm) sheet bonded to .060 inch (1.5 mm) sheet.2.6.1.3.2 Construction: Engraved to create signage.

2.6.1.4 Production Style: Digital graphics.2.6.1.4.1 .060 inch (1.5 mm) clear polycarbonate sheet, back printed with UV

curable inks.2.6.1.4.2 Polycarbonate is backed with 3 mil white laminate.2.6.1.4.3 Applied Graphics:2.6.1.4.4 Type: Tactile: Surface is bonded to .040 inch (1 mm) sheet that is cut and

assembled to create signage.2.6.1.4.5 Type: Partial inlay, surface is engraved to receive .060 inch (1.5 mm) sheet

that is cut and assembled to create signage.2.6.1.4.6 Type: Grade 2 Braille, produced with the Raster Method, patented process

for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.

2.6.1.5 5. Production Style: Photo polymer.2.6.1.5.1 Series: Clear PETG Series.2.6.1.5.2 Interior photopolymer panels composed of .032 inch thick moisture





integrally bonded to base.

10 14 36-8

2.6.1.5.22 Base Materials: .017 inch (.4 mm) aluminum alloy base.2.6.1.5.23 Signage is bonded to a 1/8 inch (3 mm) polycarbonate panel.2.6.1.5.24 Panel Thickness: 0.017 inches (.4 mm).


2.6.2 S230 - Overhead Directional Signage: As manufactured by Inpro.2.6.2.1 Production Style: Sanparrel Series, applied graphics, tactile.


2.6.3 Construction:2.6.3.1 Panel Frames: Injection molded frame.2.6.3.2 Panel Frames: Extruded aluminum frame.2.6.3.3 Panel Frames: Extruded vinyl frame.2.6.3.4 Panel Frames: Unframed.2.6.3.5 Corner Type: Collections Styles, provide Corners with standard shapes and

sizes.2.6.3.5.1 Collection: Aspen.2.6.3.5.2 Collection: Barcelona.2.6.3.5.3 Collection: Florence.2.6.3.5.4 Collection: Madison.2.6.3.5.5 Collection: Madrid.2.6.3.5.6 Collection: Manchester.2.6.3.5.7 Collection: Phoenix.2.6.3.5.8 Collection: Rio.2.6.3.5.9 Collection: Savannah.2.6.3.5.10 Collection: Sedona.2.6.3.5.11 Collection: Seoul.2.6.3.5.12 Collection: Sydney.2.6.3.5.13 Collecton: Zurich.

2.6.3.6 Mounting: Double sided foam tape; provide double-sided foam tape to adhere unframed signage to clean, dry, well sealed substrates.

2.6.3.7 Mounting: Magnetic mounting strips to attach unframed signage to steel substrates.

2.6.3.8 Mounting: Screw mount unframed signage with exposed mounting fasteners. Fasteners to be located at each corner.

2.6.3.9 Mounting: Double sided foam tape and heavy duty adhesive to adhere larger signs to clean, dry, well sealed substrates.

2.7 REGULATORY SIGNAGE

2.7.1 S310 - General Regulatory Signage: As manufactured by Inpro.2.7.1.1 Production Style: Sanparrel Series, applied graphics, tactile.



2.7.1.3 Production Style: Photopolymer.2.7.1.3.1 Series: Clear PETG Series.2.7.1.3.2 Interior photopolymer panels composed of .032 inch thick moisture

10 14 36-9

resistant, non-glare nylon photo polymer on base.2.7.1.3.3 Base Materials: Ultraviolet resistant clear PETG sign base.2.7.1.3.4 Construction: Panel must be single piece construction.2.7.1.3.5 Panel Thickness: 1/16 inch (1.5 mm).2.7.1.3.6 Panel Thickness: 1/8 inch (3 mm).2.7.1.3.7 Panel Thickness: 1/4 inch (6 mm).2.7.1.3.8 Series: Laminate PETG Series.2.7.1.3.9 .032 inch (.8 mm) thick moisture resistant, non-glare nylon photo polymer

bonded to base,2.7.1.3.10 Base Materials: .080 inch (2 mm) thick PETG and .029 inch thick laminate

base.2.7.1.3.11 Panel Thickness: 1/8 inch (3 mm).2.7.1.3.12 Series: Designer Series.2.7.1.3.13 .032 inch thick moisture resistant, non-glare nylon photo polymer with inner

layers and patterns selected by Architect.2.7.1.3.14 Overall Thickness: 1/8 inch to 1/2 inch (3.2 - 12.7 mm).2.7.1.3.15 Series: Aluminum Series - Interior.2.7.1.3.16 .032 inch (.8 mm) thick exterior grade synthetic rubber based polymer

integrally bonded base.2.7.1.3.17 Base Materials: .017 inch (.4 mm) aluminum alloy base.2.7.1.3.18 Signage is bonded to a 1/8 inch (3.2 mm) acrylic panel.2.7.1.3.19 Panel Thickness: 0.025 inches (.6 mm).2.7.1.3.20 Series: Aluminum Series - Exterior.2.7.1.3.21 .032 inch (.8 mm) thick exterior grade synthetic rubber based polymer

integrally bonded base.2.7.1.3.22 Base Materials: .017 inch (.4 mm) aluminum alloy base.2.7.1.3.23 Signage is bonded to a 1/8 inch (3.2 mm) polycarbonate panel.2.7.1.3.24 Panel Thickness: 0.017 inches (.4 mm).


2.7.2 S320 - ADA Regulatory Signage: As manufactured by Inpro.2.7.2.1 Production Style: Sanparrel Series, applied graphics, tactile.





layers and patterns selected by Architect.

10 14 36-10

2.7.2.2.14 Overall Thickness: 1/8 inch to 1/2 inch (3-13 mm).2.7.2.2.15 Series: Aluminum Series - Interior.2.7.2.2.16 .032 inch (.8 mm) thick exterior grade synthetic rubber based polymer



2.7.3 S330 - Regulatory California Signage: As manufactured by Inpro.2.7.3.1 Grade 2 Braille: Grade 2 Braille produced with the Raster Method, patented

process for placing Braille on signage. Raster Braille is computer engineered using a carbide-engraving bit, press-fit tool with vacuum pump and UV stable acrylic rasters.

2.7.3.2 Production Style: Sanparrel Series, applied graphics, tactile.2.7.3.2.1 .060 inch (1.5 mm) sheet bonded with .040 inch (1 mm) sheet.2.7.3.2.2 Construction: Cut and assembled to create signage.

2.7.4 Construction:2.7.4.1 Panel Frames: Injection molded frame.2.7.4.2 Panel Frames: Extruded aluminum frame.2.7.4.3 Panel Frames: Extruded vinyl frame.2.7.4.4 Panel Frames: Unframed.2.7.4.5 Corner Type: Square corners, provide signage corners that are 90 degrees

square.2.7.4.6 Corner Type: Radius corners, provide signage corners with a .525 inch (13 mm)

radii.2.7.4.7 Mounting: Double-sided foam tape, provide double-sided foam tape to adhere

unframed signage to clean, dry, well sealed substrates.2.7.4.8 Mounting: Magnetic mounting strips to attach unframed signage to steel

substrates.2.7.4.9 Mounting: Screw mount unframed signage with exposed mounting fasteners.

Fasteners to be located at each corner.2.7.4.10 Mounting: Double sided foam tape and heavy duty adhesive to adhere larger

signs to clean, dry, well sealed substrates.2.7.4.11 Standoffs: Provide sign panel with standoffs to allow sign panel to project from

the wall. Specify standoff distance.

2.8 INFORMATIONAL SIGNAGE

2.8.1 S410 - Engraved Plastic Informational Signage: As manufactured by Inpro.2.8.1.1 Production Style: Sanparrel Series, Applied Graphics, Engraved Text.2.8.1.2 .080 inch (2.0 mm) sheet engraved to receive .060 inch (1.5 mm) sheet.2.8.1.3 Construction: Cut and assembled to create signage.

2.8.2 S440 - Sanparrel Window Signage: As manufactured by Inpro.2.8.2.1 Production Style: Sanparrel Series, Applied Graphics, Tactile.


2.8.2.2 Style: Single window.2.8.2.3 Style: Glow - in-the-dark single window.2.8.2.4 Style: Arch double window.

10 14 36-11

2.8.2.5 Style: Arch triple window.2.8.2.6 Style: Today's direction.2.8.2.7 Style: Subsurface printed sign.

2.8.3 S450 Activity/Calendar Signage: As manufactured by Inpro.2.8.3.1 Production Style: Sanparrel Series, applied graphics, tactile.2.8.3.2 .060 inch (1.5 mm) sheet bonded with .040 inch (1 mm) sheet.2.8.3.3 Construction: Cut and assembled to create signage.2.8.3.4 Overall Size: 47-7/8 inches (1.22m) H x 681/2 inches (1.74m) W.2.8.3.5 Clear Windows: 6-1/2 inches (165 mm) H x 8-1/2 inches (216 mm) W, quantity of

35, mounted to sign with magnetic strips2.8.3.6 Monthly Header Sign: 1-1/2 inches (38 mm) H x 23 7/8 inches (606 mm) W.

2.8.4 S455 Activity/Calendar Signage: As manufactured by Inpro.2.8.4.1 Production Style: Sanparrel Series, Applied Graphics, Tactile.2.8.4.2 .060 inch (1.5 mm) sheet bonded with .040 inch (1 mm) sheet.2.8.4.3 Construction: Ct and assembled to create signage.2.8.4.4 Overall Size: 28-1/2 inches (724 mm) H x 44 inches (1120 mm) W.2.8.4.5 Clear Window: 3-1/2 inches (89 mm) H x 5-1/2 inches (140 mm) W, quantity of

35, mounted to sign with magnetic strips.2.8.4.6 Monthly Header Sign: Size 1-1/4 inches (32 mm) H x 10 inches (254 mm) W.2.8.4.7 Calendar Style: Tactile (Raised Letter):

2.8.4.7.1 Provide sign material consisting of .040 inch sheet bonded to .060 inch (1.5 mm) sheet.

2.8.4.7.2 Top layer is cut and assembled to create signage.2.8.4.8 Calendar Style: Tactile (Raised Letter) - Clear Window:

2.8.4.8.1 Top layer of .060 inch (1.5 mm) sheet, .010 inches (.25 mm) clear polycarbonate sheet and a back layer of.060 inch sheet.

2.8.4.8.2 Top layer is cut and bonded to clear sheet with white foam tape to create window.

2.8.4.8.3 Clear sheet is bonded to back layer with space to allow user supplied paper to slide behind clear sheet.

2.8.5 Construction:2.8.5.1 Panel Frames: Injection molded frame.2.8.5.2 Panel Frames: Extruded aluminum frame.2.8.5.3 Panel Frames: Extruded vinyl frame.2.8.5.4 Panel Frames: Unframed.2.8.5.5 Corner Type: Square corners, provide signage corners that are 90 degrees

square.2.8.5.6 Corner Type: Notched corners, provide signage corners with a .5 inch (13 mm)

notch.2.8.5.7 Mounting: Double-sided foam tape, provide double-sided foam tape to adhere

unframed signage to clean, dry, well sealed substrates.2.8.5.8 Mounting: Magnetic mounting strips to attach unframed signage to steel

substrates.2.8.5.9 Mounting: Screw mount unframed signage with exposed mounting fasteners.

Fasteners to be located at each corner.2.8.5.10 Mounting: Double sided foam tape and heavy duty adhesive to adhere larger

signs to clean, dry, well sealed substrates.2.8.5.11 Standoffs: Provide sign panel with standoffs to allow sign panel to project from

the wall. Specify standoff distance.

2.9 DIRECTORY SIGNS

2.9.1 S503 - Magnetic Modular Directory Signage with Locked Directory Case: As manufactured by Inpro.

10 14 36-12

2.9.1.1 Production Style: Sanparrel Series, applied graphics, tactile.2.9.1.2 .060 inch (1.5 mm) sheet bonded with .040 inch (1 mm) sheet.2.9.1.3 Construction: Cut and assembled to create signage.2.9.1.4 Frame: Enclosed case with Key Locking Acrylic Door.2.9.1.5 SignScape standard finish selection, as scheduled and indicated on Drawings.

2.10 DIMENSIONAL CHARACTERS

2.10.1 S600-.060 Signage: As manufactured by Inpro.2.10.1.1 Dimensional Letters: .060 inch (1.5 mm) sheet.2.10.1.2 Height: 2 inches (51 mm).2.10.1.3 Height: 4 inches (102 mm).2.10.1.4 Height: 6 inches (152 mm).2.10.1.5 Height: 8 inches (203 mm).2.10.1.6 Height: 10 inches (254 mm).2.10.1.7 Height: 12 inches (305 mm).2.10.1.8 Height: 14 inches (355 mm).2.10.1.9 Height: 16 inches (406 mm).2.10.1.10 Height: __ inches (___ mm).

2.10.2 S600-6MM Signage: As manufactured by Inpro.2.10.2.1 Dimensional Letters: .060 inch (1.5 mm) sheet bonded to 6 mm Celtec board.

Both layers are cut to create dimensional letter signage.2.10.2.2 Height: 2 inches (51 mm).2.10.2.3 Height: 4 inches (102 mm).2.10.2.4 Height: 6 inches (152 mm).2.10.2.5 Height: 8 inches (203 mm).2.10.2.6 Height: 10 inches (254 mm).2.10.2.7 Height: 12 inches (305 mm).2.10.2.8 Height: 14 inches (355 mm).2.10.2.9 Height: 16 inches (406 mm).2.10.2.10 Height: __ inches (___ mm).

2.11 DRY ERASE SIGNAGE

2.11.1 S700H - Tactile Lettering Signage: As manufactured by Inpro.2.11.1.1 Dimensions: 12 inches x 12 inches (305 mm x 305 mm).2.11.1.2 Dimensions: 24 inches x 24 inches (610 mm x 610 mm).2.11.1.3 Frame: Aluminum, square corners.2.11.1.4 Frame: Vinyl, square corners.

2.11.2 S720M - Tactile Letters with ADA Compliant Grade 2 Braille Signage: As manufactured by Inpro.2.11.2.1 Dimensions: 6 inches x 6 inches (152 mm x 152 mm).2.11.2.2 Dimensions: 8 inches x 8 inches (203mm x 203 mm).2.11.2.3 Frame: Injection molded, square corners.

2.11.3 S700SI - Staffing Indicator Signage: As manufactured by Inpro.2.11.3.1 Dimensions: 18 inches x 24 inches (457 mm x 610 mm).2.11.3.2 Frame: Aluminum, square corners.2.11.3.3 Frame: Vinyl, square corners.

2.11.4 Frames: Extruded aluminum frames.2.11.4.1 Materials: 6063-T5 aluminum.2.11.4.2 Finish: Anodized.

2.11.5 Frames: Extruded vinyl frames.

10 14 36-13

2.11.5.1 Materials: Extruded from chemical and stain resistant polyvinyl chloride.2.11.5.2 Texture: Smooth.

2.11.6 Frame Color: As selected by Architect from the InPro SignScape standard finish selection, as scheduled and indicated on Drawings.

2.11.7 Dry Erase Boards: Non-magnetic boards, no-ghost, dry erase on 1/8 inch (3 mm) Hardboard

2.11.8 Dry Erase Boards: Magnetic skins, no-ghost, dry erase on treated, 24 gauge steel.

2.12 DRY ERASE COATINGS

2.12.1 Dry Erase Coatings: As manufactured by Inpro.2.12.1.1 White Dry Erase - Dry Erase Coating: Exclamation Paint as manufactured by

Inpro.

3 EXECUTION

3.1 EXAMINATION

3.1.1 Verify that wall surface is dry and free from dirt, grease, and loose paint.

3.1.2 Complete all finishing operations, including painting, before beginning installation of signage systems.

3.1.3 Do not begin installation until substrates have been properly prepared.

3.1.4 If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.1.5 Examine signage for defects prior to installation. Do not install damaged signage.

3.2 PREPARATION

3.2.1 Verify mounting heights and locations comply with referenced standards.

3.2.2 Clean surfaces thoroughly prior to installation to remove dust, debris and loose particles.

3.2.3 Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

3.3.1 Locate the signage system as indicated on drawings for the appropriate substrate and in accordance with manufacturer's installation instructions.

3.3.2 Install signage systems level and plumb at the height indicated on the drawings.

3.4 CLEANING

3.4.1 At completion of installation, clean surfaces in accordance with manufacturer's instructions.

3.5 PROTECTION

3.5.1 Protect installed products until completion of project.

3.5.2 Touch-up, repair or replace damaged products before Substantial Completion.

10 14 36-14

END OF SECTION

10 14 36-15

arcat · web viewsection 10 14 36 interior signage display hidden notes to specifier. (don't...

Documents