arch 133 series 410 - great lakes windows commercial... · corner spigot joinery. scale: half full...

SERIES 411 ViewMASTER™ BI-FOLD DOOR

134.1AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE

INTRODUCTION

DATE MAR 07 REPLACES DEC 06 SCALE NOT TO SCALE

Design Features

• The AWS Series 411 ViewMASTER™ top hung Bi-fold door has been designed to accept the 50mm thick heavyduty Series 50 and 52 doors. 50mm thick doors are almost 70% stronger than conventional 45mm thickdoors. This allows us to make this Bi-fold door up to 3000mm high.

• Bi-fold doors are hung on Centor™ twin stainless steel bearing rollers running inheavy duty dual overhead tracks.The standard E2 rollers will carry door panels up to 40Kg and the heavyduty E3 will carry door panels up to 80Kg.

• The Surelock™ adjustment on the pivots and carriersallow all panels to be lifted or lowered to followhead and sill easily with a flat screwdriver.There are no locknuts which couldcome undone. As the structure(building) settles the doors can beadjusted to suit. Door panels have 5mmplus and minus vertical adjustment.

• Top carriers are also fitted with side-thrust roller/s. This protects the mainload bearing from damage and insidescraping. This provides a silent smoothrolling action.

• Large diameter side thrust sill nylon tyred stainlesssteel bearing rollers complete the package and asmentioned above they have 5mm plus and minusvertical movement as the carriers above areadjusted.

• Carriers, pivots, hinges and accompanying fixingscome in 304 stainless steel as standard.

• Rebated French door stiles give a flush appearance whenthe two doors meet (e.g. 3L1R and 3L3R) and providesuperior weather protection.

• Concealed lock keeper specially designed to fit in thecavity on the leading edge of the "lazy side" door . Thisrecessed keeper plus the rebated stile makes it difficultfor intruders to access the latch and bolt for forced entry.

• With the snap-on jamb adaptor we can offer a veryextensive range of jambs to cover almost any situation.

• Doors can be supplied with a variety of lever lock options including multi point locking for added security.

• Successfully water tested at 450Pa (refer water rating table) and is suitable for air-conditioned buildings when using the weather resisting sill detail.

• Seamless type door panel construction (rails nest into stiles) to conceal the assembly joint.

• Bi-fold panels can be secured with key operated twinbolts.

• This Bi-fold can be supplied with integrated roller flydoor. Please note this flydoor system is factory fitted, can't be retro fitted to existing Bi-fold.

• Compatible with most 102mm AWS framing and window systems.

Limitations :

• Overhead structure (the building lintel) must be capable of supporting the weight of the door panels with less than 3mm of point load deflection.

• The ramp and recessed door sills and internal opening doors have no water resistance rating.

Australian Registered Design


134.2 AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE

DOOR OPTIONS

DATE DEC 06 REPLACES SCALE HALF FULL SIZE

Two door optionsAWS offer two different types of doors that are suitable for Series 411 ViewMASTER™ as shown below.

Series 52Fully beaded (inside andout) with aluminiumcorner spigot joinery.

scale: half full size

Series 50Stiles wrap around the glass.Beaded top and bottom rails.The glazing pocket is the same width and depth as shopfront framing.

Series 52Stiles are fully beaded, same as rails.We also have a large variety of glazing beads including 90° square, 45° splayed,25° splayed, double glazing and beads to suit thick glass.

The snap-on jamb adaptor has a couple of significant advantages:• Allows us to offer a very large range of jambs including nailing fin and corner jambs.• The adaptor step allows us to use conventional s.s. lock keepers.

Series 50Horizontal externalbeads only withaluminium cornerspigot joinery.



PRODUCT RANGE & LIMITATIONS

DATE DEC 06 REPLACES SCALE NOT TO SCALE

type 4L2RDoors fold to both sides with no loose leaves.Min. width = 4344mm Max. width = 6144mm

type 4LDoors fold to one side with no loose leaves.Min. width = 2936mm Max. width = 4136mm

type 3L1RDoors fold to one side with pair of French doors at end.Min. width = 2936mm Max. width = 4136mm


type 3LDoors fold to one side with one loose leaf on the end.Min. width = 2232mm Max. width = 3132mm

type 2L2RDoors fold to both sides with no loose leaves.Min. width = 2936mm Max. width = 4136mm

type 5LDoors fold to one side with one loose leaf on the end.Min. width = 3640mm Max. width = 5140mm


type 3L3RDoors fold to both sides with pair of French doors.Min. width = 4344mm Max. width = 6144mm

type 5L1RDoors fold to one side with pair of French doors at end.Min. width = 4344mm Max. width = 6144mm



PERFORMANCE & LIMITATIONS


Table WM25.1 Wind Ratings (Pa) Bi-fold door meeting stiles.Applies to those doors that don't have French meeting stiles:2L, 2L1R, 3L, 4L, 2L2R, 4L1R, 3L2R, 5L, 4L2R, 6L,2R, 2R1L, 3R, 4R, 4R1L, 3R2L, 5R, 4R2L and 6R.

The following configurations are slightly weaker as they contain one set of French meeting stiles:3L1R, 5L1R, 3L3R, 3R1L and 5R1L.For this meeting stile combination go to the Series 400 swing door Pa tables.

Maximum Bi-fold Door Panel SizesMaximum panel weight 80 kg per panel.

Minimum panel width 700mm (on equal panel doors without loose door leaf - 2L, 2R, 4L, 4R, 6L, 6R, 2L2R, 2L4R & 4L2R)600mm (on remaining door types with a loose leaf in the configuration).

Maximum panel width 1000mm

Maximum panel height 3000mmPanel sizes will vary depending on weight, design wind load and allowable metal deflection.Double glazed doors may be limited by the availability of large IGU panels.

Hinge quantity 3. hinges - height less than or equal to 2200mm4. hinges - height greater than to 2200mmWhen using four hinges we recommend that the lower central inner hinge has the pull handle.

Sound Transmission LossDoor glazed with 6.38mm laminated glass rates 31 dB(A)Door glazed with 19mm IGU made up of two layers of 5mm toughened glass rates 32 dB(A)

Important Notes:The Ratings listed right cover the strength of the transom only.S = Serviceability limit state (deflection = L/180 and L/250).U = Ultimate strength limit state (factored yield strength = 104 MPa).

These tables have been calculated using section properties.

Serviceability strength rating has been limited to 3333 Pa andUltimate strength rating has been limited to 5000 Pa.

Typical exampletype.2L

Bi-fold Door Meeting Stile Strength Guide

Panel Panel Series 50 (81631 & 81632)

Height Width S (Pa) S (Pa) U (Pa)

mm mm 1/180 1/250

2100 700 2627 1891 5000

2100 800 2331 1678 5000

2100 900 2105 1516 4890

2100 1000 1929 1389 4469

2400 700 1741 1254 4651

2400 800 1540 1109 4106

2400 900 1385 997 3687

2400 1000 1264 910 3357

2700 700 1214 874 3562

2700 800 1071 771 3218

2700 900 961 692 2884

2700 1000 874 630 2619

3000 700 880 634 2945

3000 800 776 558 2592

3000 900 695 500 2319

3000 1000 631 - 2102

Series 52 (81633 & 81634)

S (Pa) S (Pa) U (Pa)

1/180 1/250

1957 1409 4550

1736 1250 4029

1568 1129 3630

1437 1035 3318

1297 934 3453

1147 826 3048

1032 743 2738

942 678 2493

904 651 2711

798 575 2389

716 516 2141

651 - 1944

656 - 2187

578 - 1924

518 - 1722

- - -



Head bolted to structure with M8 bolts@ 600mm max. cts.

Type E2 head detail illustrated willsupport door panel weights up to40Kg. The heavy duty E3 headillustrated on following page.

Water Resistance:E2 head shown on this page has beentested to resist 150Pa water.

Heavy duty tubular head.

Stainless steel shoot bolts.

Double weatherpile head seals.

Height adjustable type E2 stainless steeloverhead roller carrier.

Series 50 door illustrated. Fully beadedSeries 52 door also available.

50mm Thick doors allow large (tall)door panels, refer Pascal rating tableson previous page.

Safety glass in accordance with AS1288.

Series 52 doors can also be doubleglazed with 24mm insulating glass units.

CAD file: DWG or DXFAWS_411_50_1

E2 HEAD

DATE DEC 06 REPLACES SCALE FULL SIZE

Drawing number.Door series.Framing series.



E3 HEAD


Head bolted to structure with M8 bolts@ 600mm max. cts.

Type E3 head detail illustrated willsupport door panel weights up to80Kg. The standard E2 head illustratedon previous page.

Water Resistance:E3 head shown on this page has beentested to resist 450Pa water.

Head rollers fitted with sealed sidethrust bearings to protect main loadbearing rollers.

Stainless steel hinges secured to doorstiles with 10# countersunk stainlesssteel self tapping screws.

Type E3 heavy duty stainless steel toproller carrier.

The spring loaded Surelock™adjustment on the pivots and carriersallow all panels to be lifted or loweredto follow head and sill easily with a flatscrewdriver.




E3 HEAD


A flat screw driver can be used to adjust theSurelock™ pin via the temporary shipping clip.

If the doors need adjusting in the future wedge thebottom of the door panels to remove the dead loadfrom top carrier. Release the spring loadedSurelock™ pin and adjust as required. Then removethe sill wedges.

Intermediate carrier can be adjusted verticallyif required using the patented Surelock™adjustment.

Edge carrier sets have two load carryingwheels and side thrust bearings.This carrier is also height adjustable.



SILL - RECESSED



120

25

AWS use 50mm thick heavy duty door panelsin Series 411 Bi-fold. The Series 50 doorillustrated left is 70% stronger than 45mmconventional doors.

Stainless steel sill roller assembly.Note:All weight is carried by the head rollers.

Water Resistance:Recessed sill shown on this page has no waterresistance.

Large diameter sealed side thrust rollers.

All AWS sills cater for 5mm plus and minusadjustment to cater for building settlement.

Cut 120mm x 35mm recess in floor finish toaccept this sill.

35



SILL - RECESSED


Some of the major features with the AWS ViewMASTER™ Bi-folddoor frame are :

• Tested for compliance with relevant Australian Standards. Wealways test the maximum recommended size when possible. Inthis situation we were able to test a 3000mm x 4000mm fourpanel door.

• 102mm Commercial frame matches adjoining Architecturalcommercial products. Can be coupled to most of these matchingframes if required.

• Numerous jambs to choose from (102 x 44mm illustrated).

• The 50mm panels we use in this Bi-fold door are 70% strongerthan conventional 45mm thick doors. Based on manufacturerspublished span charts.

• LouvreMASTER™ sun control shutters can be fitted into thissystem.

• ClearVENT™ sashless double-hung inserts can be fitted into doorpanels.

• The recessed sill shown on this page is designed to be fabricatedand supplied with main frame. This significantly reduces the chanceof installation errors.

• This recessed sill (81628) is not designed to keep water out andshould be used in sheltered locations.

We offer a variety of sill types with this door system.The detail on this page shows the recessed option81628.



FLOOR CHANNEL



Series 50 doors will acceptglass up to 10.38mm thick.

For thicker glass use the fullybeaded door Series 52.

Stainless steel sill rollerassembly.Note:All weight is carried by thehead rollers.

Water Resistance:Recessed sill shown on thispage has no water resistance.

Large diameter sealed sidethrust rollers.

All AWS sills cater for 5mmplus and minus adjustment tocater for building settlement.

49 2230.50

29.5

0

5

5

Intermediate sill sidethrust roller carriage.

Large diameter nylontyred sealed bearings.

Edge sill side thrust rollercarriage.



FLOOR CHANNEL

DATE DEC 06 REPLACES SCALE FS & NOT TO SCALE

Some of the major features with the AWSViewMASTER™ Bi-fold door frame are :

• Having the support gear at the headallows us to offer a very low line sill.

• The channel guide sill shown on thispage is the smallest sill we offer.Requiring only 40mm wide by 35mmdeep recess in floor finish.

• This sill is not designed to keep waterout and should be used in shelteredlocations.

We offer a variety of sill types with this door system.The detail on this page shows the channel sill option 81627.

We also offer a weather seal as shown rightthat can be fitted to the bottom of doorsto reduce air flow.



SILL - WEATHER RESISTING


112

2740

We recommend that the weather sill isrecessed into floor as shown left.

Water Resistance:Weather sill will resist 200Pa water.

Drainage holes.

Co-extruded Santoprene cover flap.


The detail lower left shows weather sill in sub-sill recessed into floor.

Water Resistance:Weather sill in sub-sill will resist 300Pa water.Fitting the external weather strip shown farleft increases water resistance to 450Pa.



SILL - WEATHER RESISTING


Some of the major features with the AWS ViewMASTER™ Bi-folddoor frame are :

• High water resistance when fitted with weather resisting sill insub-sill and the appropriate frame and door seals.

• Tested to comply with air-conditioning requirements of theAustralian Standard.

• Clean sharp external and internal faces make the product suitablefor modern architecture.

• Alternative glazing options including double glazing.

• If you prefer door panels with splayed beads all round, we canoffer this too with the Series 52 door.

• Panels can be fitted with midrails (50mm, 115mm or 125mm).

• ClearVENT™ sashless double-hung inserts can be fitted into doorpanels.

• Custom hardware designed for easy installation and flawlessoperation is a feature of the product.

• 50mm Thick door panels are designed for large panels. The frontand back walls on stiles have been thickened to give us the strengthrequired.

• Oversize door panels will be heavy. The head is bolted to concreteheader or steel lintel bar.

411 Panels are supported by Centor™ stainless steel runninggear.

We offer a variety of sill types with this door system.The detail on this page shows the weather resistingoption 81625.



Series 50 doors will accept glass up to10.38mm thick.

For thicker glass use the fully beaded doorSeries 52.

Stainless steel sill roller assembly.Note:All weight is carried by the head rollers.

Water Resistance:Internal opening doors with any of our sillshave no water resistance (don't achieve150Pa).

Large diameter sealed side thrust rollers.

All AWS sills cater for 5mm plus and minusadjustment to cater for building settlement.

120

25

35

This recessed sill can be fabricated and shipped with the main frame.

Cut 120mm x 35mm recess in floor finish to accept this sill.

SILL - WEATHER RESISTING INTERNAL SWING




SILL - WEATHER RESISTING INTERNAL SWING


Some of the major features with the AWS ViewMASTER™ internalswing Bi-fold door frame are :

• This page shows the weather resisting sill 81625 in custom sub-sill. The sub-sill has integrated co-extruded Santoprene anti blowback flap covering the front drainage holes.

Water Resistance:Internal opening doors with any of our sills have no water resistance(don't achieve 150Pa).

We offer a variety of sill types with this door system.The detail on this page shows the weather resistingoption 81625 opening in on sub-sill.



SILL - RAMP


Water Resistance:Ramp sill shown on this page hasno water resistance.


Series 50 doors will acceptglass up to 10.38mm thick.

For thicker glass use the fullybeaded door Series 52.

Stainless steel sill rollerassembly.Note:All weight is carried by thehead rollers.

Large diameter sealed sidethrust rollers.

All AWS sills cater for 5mmplus and minus adjustment tocater for building settlement.

We also offer a weather seal asshown above that can be fitted tothe bottom of doors to reduce airflow.



SILL - RAMP


Some of the major features with the AWS ViewMASTER™ internalswing Bi-fold door frame are :

• The ramp sill (81626) has been designed for commercialapplications where it's not possible to recess the sill into thefloor finish.

• This sill is not designed to keep water out and should be used insheltered locations.

• The optional sill weather seal shown on previous page can befitted to door bottom rails.

• Large diameter sealed side thrust bearings in sill roller assembly.Hinges, roller support bracket and fixing screws are stainless steel.

We offer a variety of sill types with this door system.The detail on this page shows the ramp sill option 81626.



Custom designed stainless steel central hinge/s has pull handle as shown above to make iteasier to close and secure the folding panels.

Custom designed stainless steel hinges easilylocate into stiles and are fixed with countersunkstainless steel screws.

CAD file: DWG or DXFAWS_411_52

MEETING STILES - HINGE

DATE DEC 06 REPLACES SCALE FULL SIZE & NTS

Proprietary bolt activators come in key or non-key versions. Details on key version shown laterin these notes.

Co-extruded Santoprene door bulb seals fittedto stiles inside and out.

Wrap around Series 52 fully beaded stilesillustrated.Series 50/51 shown on following page.

Heavy duty meeting stiles designed for over height doors,refer span chart at he start of this section.



Overhead stainless steel roller hinges designedfor this product are fixed with countersunkstainless steel screws.

Standard heavy duty E3 roller assembly illustrated.

Co-extruded Santoprene door bulb seals fittedto stiles inside and out.

Wrap around Series 50/51 stiles illustrated.Series 52 fully beaded stiles shown on previouspage.

Custom stainless steel side thrust sill rollercarriage.


MEETING STILES - HEAD ROLLER


Heavy duty meeting stiles designed for over height doors,refer span chart at he start of this section.Series 50 stiles are significantly stronger than Series 52.



French meeting stiles have been designed to accept:

• ANDO™ and Miro Lever twinbolt for the keeper stile as illustrated below.

• ANDO™ and Miro Lever latch set illustrated below.These proprietary locks come in two or four point locking.When the panel height exceeds 2100mm we recommend four point locking to keep the top and bottom of the stile against the seals under wind load.

• Lock stile will also accept Lockwood 3580 and Legge 995MF latch sets.

• When using the Lockwood or Legge latch sets use finger operated flushbolts on the keeper stile.

Detailed information on all of these hardware options shown on following pages.

Flushbolts, ANDO™ and Miro bolts are supported with custom extruded aluminium guides.

Meeting stiles are sealed with co-extruded Santoprene wiper seals.


FRENCH MEETING STILES





JAMB - PIVOT ASSEMBLY


Pivots are adjustable horizontally via screw in the head guiderecess.

and

Vertically via the Surelock™ adjustment.

When correct adjustment is reached and doors operatewell, remove the yellow shipping clip and spacer. Surelock™will automatically snap into place when the blade and slotare aligned.

To re-adjust at a later date, simply pull down the blade androtate as required to lift or lower. If you can't find the yellowshipping clip it will be necessary to take the load off thepivot while adjusting.

Snap-in raised door stop.

Custom stainless steel sill pivot assembly.



Extruded aluminium boltguide.

Miro key locking twinboltactivator. Key on the insideonly.

External handle doesn'tmove.


Miro four point lever lockillustrated.

AWS Custom glassfilled nylon keeper.

See the ANDO™ and Miro twinbolts open and close on ourweb site: www.awscommercial.com.au

123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121123456789012345678901234567890121

Note:ANDO™ and Miro leverlock sets and twinbolts aredesigned for residentialapplications.

PROPRIETARY LEVER LOCK

DATE DEC 06 REPLACES SCALE HALF FULL SIZE & NTS

ANDO™ key lockingtwinbolt activator. Snib keyon the inside only.

External handle doesn'tmove.


ANDO™ four point leverlock illustrated.




Surface mounted flushbolt nests into theFrench keeper stile as detailed left.

Bolts secured with custom extrudedaluminium guide both ends of stile thatprevents the shoot bolt from turning anddropping.

Non-Key OptionProprietary ANDO™ and Miro key Bi-fold activatorsare also available in a non-key version.

Series 50/51 French stiles illustrated on this page.

We also have Series 52 French stile

SHOOT BOLTS


See the ANDO™ and Miro Bi-fold activators open and close onour web site: www.awscommercial.com.au

Snib keystandard



Rebated stiles have been designed to accept a variety of locksand bolts in the keeper stile as shown later in these notes.

Lockwood Series 3580 short backset cylinder mortice lock- 30mm backset, withLockwood Series 4800 or 5800 furniture.

There are numerous lock and furniture options refer Lockwood catalogue and/or web site (www.lockwoodsecurity.com).

AWS Series 50/51 door French stile illustrated. This lock can also be fitted intoSeries 52 fully beaded French stile.

Lockwood Series 3580 short backset cylinder mortice lock- 30mm backsetcan be fitted into Series 50 and Series 51 Bi-fold stile as shown right.

On Series 52 use 25.40mm backset, with Lockwood Series 4800 or 5800furniture.

There are numerous lock and furniture options refer Lockwood catalogueand/or web site (www.lockwoodsecurity.com).

Jamb stile uses the standard stainless steel keeper that comes with the lock.


Rebated French meeting stiles Bi-fold lock stile

LOCKWOOD 3580 LOCK




Legge Pacific 995MF multi function narrow stile mortice lock - 30mm backset, withextended cylinders and with Dalco narrow style Series 5300 or 5400 furniture.

There are numerous furniture options refer Dalco Narrow Style Furniture catalogueand/or web site (www.irarchitecturalhardware.com.au).

AWS Series 50/51 door French stile illustrated. This lock can also be fitted intoSeries 52 fully beaded French stile.

Legge Pacific 995MF multi function narrow stile mortice lock - 30mm backsetcan be fitted into Series 50 and Series 51 Bi-fold stile as shown right, with extendedcylinders and with Dalco narrow style Series 5300 or 5400 furniture.

There are numerous furniture options refer Dalco Narrow Style Furniturecatalogue and/or web site (www.irarchitecturalhardware.com.au).

Series 52 doors are not suitable with Legge 995MF lock as we can only fit the23mm backset into the Bi-fold stile and 23mm is not enough on Bi-fold doors.

Jamb stile uses the standard stainless steel keeper that comes with the lock.


Rebated French meeting stiles Conventional lock stile

LEGGE 995MF LOCK




FLYDOOR - HEAD & SILL

DATE MAR 08 REPLACES DEC 06 SCALE HALF FULL SIZE

H =

O/A

Hei

ght

Flys

cree

n Fr

ame

Hei

ght

= H

+ 8

2

211

2039

Heavy duty flydoor frame secretly fixedto main frame in factory.

Removable access covers to allow futureaccess for maintenance.

Maximum flyscreen height 3000mm (sameas main door).

Snap-on cover to allow future access formaintenance.

Recess sill into the floor finish similar towhat's shown below.

4mm Shims under flyscreen sill.10mm Shims under Bi-fold sill.

6

See the flydoor open & close infull coulour on our WEB site:www.awscommercial.com.au



FLYDOOR - ALTERNATIVE SILLS

DATE MAR 08 REPLACES DEC 06 SCALE HALF FULL SIZE

H =

O/A

Hei

ght

Flys

cree

n Fr

ame

Hei

ght

= H

+ 8

H =

O/A

Hei

ght

Flys

cree

n Fr

ame

Hei

ght

= H

+ 3

1

29

10

225

4020

87 213

2044

36

Fitting Bi-fold frame into sub-sill willgive a higher water resistance number,refer Water Resistance page.

Continuous seal flyscreen frame to floorfinish in this area.

Fix both sub-sill and flyscreen sill to floor finish.

Recessing the Bi-fold sill andflyscreen sill into the floor finish asshown left has no water resistance.

6

6mm Shims under flyscreen sill.35mm Shims under Bi-fold sill.

10mm Shims under flyscreen sill.6mm Shims under sub-sill.



FLYDOOR HORIZONTAL SECTION

DATE MAR 08 REPLACES DEC 06 SCALE NTS

W =

O/A

Wid

th

Flys

cree

n Fr

ame

Wid

th =

W +

46

2323

Flyscreen stile location when screen isopen.

Flyscreen stile runs up to magnetic stripin the jamb closer.

This page shows the flyscreen frame fittedbehind 3L door combination, make surethe flyscreen does not exceed theabsolute maximum flyscreen width.

Single opening flyscreen can be fitted toother Bi-fold door that open to one sideonly as long as you don't exceed theabsolute maximum single screen width.

Galvanised building-in lug used to secureflyscreen frame to wall, fit lugs @ 450mmmax. cts.

This detail shows how the internal walllining could be tucked into the flyscreenframe.

Max

imum

flys

cree

n w

idth

Important Note:The flyscreen frame can only be fixed tothe 44mm jambs as shown left and is notsuitable for retro fitting.

This page shows the flyscreen frame fittedbehind 3L door combination.

Jamb extender used toextend the jamb to align withflydoor jamb.

Jamb cavity closer fitted toallow main frame fixing.

Pack to prevent main framedishing.

Fix jamb to cavity closer @450mm max. cts. before fittingthe Bi-fold jamb adaptor.

Sna-in Bi-fold jamb adaptor.

26

Alternative 26mm step inthe brick skins removes theneed for jamb extender.

Flush jamb opening

The maximum flyscreen width variesdepending on the Flyscreen frame height.

If the Flyscreen frame height <= 2450mmthen the maximum flyscreen width wouldbe 3050mm.

If the Flyscreen frame height > 2450mmand <= 3000mm then the maximumflyscreen width would be 2400mm.



FLYDOOR HORIZONTAL SECTION

DATE MAR 08 REPLACES DEC 06 SCALE NTS

W =

O/A

Wid

th

Flyd

oor

Fram

e W

idth

= W

+ 4

6

2323

Important Note:This page shows the flyscreen frame fittedbehind 3L 1R door combination with thescreen door meeting at French meetingstiles.

This is only possible if the door leavesare not too wide and the screen doesnot exceed the maximum width.

On other four panel combinations 4L, 4Rand 2L2R the screen door would meet inthe middle.

Flyscreens can be fitted to other doorcombinations as long as they don't exceedthe absolute maximum double screenwidth.

Flydoor stile location when screen isopen.

Max

imum

flys

cree

n w

idth

Jamb extender used to extendthe jamb to align with flydoorjamb.

Jamb cavity closer fitted to allowmain frame fixing.

Pack to prevent main framedishing.

Fix jamb to cavity closer @450mm max. cts. before fittingthe Bi-fold jamb adaptor .

Snap-on Bi-fold jamb adaptor.

Flush jamb opening

Flush jamb opening

The maximum single flyscreen widthvaries depending on the Flyscreen frameheight.

If the Flyscreen frame height <= 2450mmthen the maximum single flyscreen widthwould be 3050mm or 6100mm on adouble if the screens met in the middle.

If the Flyscreen frame height > 2450mmand <= 3000mm then the maximum singleflyscreen width would be 2400mm or4800mm on a double if the screens metin the middle.

See the flydoor open & close infull coulour on our WEB site:www.awscommercial.com.au



ClearVENT™ Sashless double-hung sashes can be inlaid intoSeries 50 ViewMASTER™ doors as shown on this and thefollowing page.

The ClearVENT™ inlay comes in flyscreen version asdisplayed on these pages or non-flyscreen (no external screenacceptor channel).

Clearly nominate your preference when specifying.

Inlay sill double weatherpile sealed to glass.

Roll-in wedge closes off the inlay to door sill gap.

Door Bottom Rail

Optional flyscreen shown.

Fitting a screened ClearVENT™ into one of the door panelsis a way of screening the Bi-fold unit.

For more details on sashless double-hung insert go toClearVENT™ windows, Section 146.

CAD file: DWG or DXFAWS_400_CV_8

ClearVENT™ SASHLESS DOUBLE-HUNG INSERT

DATE MAR 08 REPLACES SCALE FULL SIZE



ClearVENT™ SASHLESS DOUBLE-HUNG INSERT

DATE MAR 08 REPLACES SCALE HALF FULL SIZE & NTS

70C

lear

VEN

T™

Wid

th =

PW

- 1

40

PW

= P

anel

Wid

th

ClearVENT™ insert nests into Series 50 door panel with orwithout flyscreen. The isometric detail right shows the non-flyscreen jamb adaptor 72886. Where the plan view belowshows the flyscreen adaptor 72883.

Refer Series 464 Architectural Commercial window for fulldetails on ClearVENT™ options and production information.

RecommendWhen ClearVENT™ inserts are fitted into door panels werecommend that you fit a midrail with fixed lowlight to bracethe door panel

72883

81632

81604



LouvreMASTER™ sun control shutters (Series 417) canbe fitted into a large variety of AWS products:• Series 411 ViewMASTER™ Bi-fold doors and windows.• Series 410 FoldMASTER™ Bi-fold doors and windows.• Series 52 Hinged or sliding doors.• Series 400 awning and casement windows.

LouvreMASTER™ sun control shutters can befitted into Bi-fold doors, refer section 130 fordetail.

LouvreMASTER™ SUN CONTROL SHUTTERS

DATE MAR 08 REPLACES SCALE NOT TO SCALE

LouvreMASTER™ adjustable aluminiumshutter adaptors snap into Series 52 doorpanel. The isometric detail right shows theblades in the closed position.

Refer Series 417 LouvreMASTER™ for fulldetails on LouvreMASTER™ options andtechnical information.

Note:The following 'Design Details' have been produced to assist architects and designers in the use of ArchitecturalWindow Systems (AWS) Series 411 ViewMASTER™ Bi-fold door system.

All care has been taken in the production of these pages, but Architectural Window Systems Pty Ltd can take noresponsibility for errors. If you should find any errors please contact your local AWS sales office.

Details are subject to change without notice. The latest information can be accessed on our web sitewww.awscommercial.com.au

Design Details

Series 411ViewMASTER™

Bi-fold Doorand Window



Page Contents

134. 1 Introduction.

134. 2 Door options.

134. 3 Product range & size limitations.

134. 4 Performance & limitations.

134. 5 E2 Head.

134. 6 E3 Head.

134. 7 E3 Head.

134. 8 Sill - recessed.

134. 9 Sill - recessed.

134. 10 Sill - channel.

134. 11 Sill - channel.

134. 12 Sill - weather resisting.

134. 13 Sill - weather resisting.

134. 14 Sill weather resisting internal swing.

134. 15 Sill weather resisting internal swing.

134. 16 Sill - ramp.

134. 17 Sill - ramp.

134. 18 Meeting stiles - hinge.

134. 19 Meeting stiles - head roller.

134. 20 French meeting stiles.

134. 21 Jamb - pivot assembly.

134. 22 Proprietary lever locks.

134. 23 Shoot bolts.

134. 24 Lockwood 3580 lock.

134. 25 Legge 995MF lock.

134. 26 Flydoor - Head and Sill.

134. 27 Flydoor - Alternative Sills.

134. 28 Flydoor - Horizontal Section.

134. 29 Flydoor - Horizontal Section.

134. 30 ClearVENT™ sashless double-hung insert.

134. 31 ClearVENT™ sashless double-hung insert.

134. 32 LouvreMASTER™ sun control shutters.

INDEX

DATE MAR 08 REPLACES JULY 07 SCALE

arch 133 series 410 - great lakes windows commercial... · corner spigot joinery. scale: half full...

Documents