arch form chart | nickel titanium | heat activated niti | cna beta … · 2020-02-21 · 59...

57

Bringing German Engineering to Orthodontics

product line WireS

Centermark: Permanent Etch marking

Arch Form chart | nickel titanium | Heat Activated niti | cnA BetA iii | Stainless Steel

nAturAlForM

NATURAL 2

Niti

nAturAlForM

tWiStAdent 3-flex stainless steel

tWiStAdent 6-flex stainless steel

nAturAlForM

FleXAdent nickel titanium superelastic

tHerMAdent - heat activated niti

tWiStAdent 8 Braided stainless steel

durAdent stainless steel

STANDARD

NitiBeta III CNA

SS SolidSS 8-Braid

SS CoaxSS 8-Braid

FLEXADENT Nickel Titanium superelastic

THERMADENT - heat activated NITI

TRIDENT CNA BETA III

DURADENT stainless steel

STANDARDFORM

LINGUAL

NitiBeta III CNA

SS

INTERNATIONAL

NitiBeta III CNA

SS SolidSS 8-Braid

EUROFORM




TWISTADENT 8 Braided stainless steel

TRIDENT CNA BETA III

LINGUALFORM

Radius :

Size 1 R 11.0 mm

Size 2 R 12.3 mm

Size 3 R 13.6 mm

Size 5 R 14.9 mm

trident cnA Beta iii

Dimple: Upper and lower dimples




TWISTADENT 3-flex stainless steel

TWISTADENT 6-flex stainless steel

TWISTADENT 8 Braided stainless steel

AMERICANFORM

58

Choosing The Best Wire For The Application

nickel titanium Wire - FleXAdent™

(niti -approximately 55% ni and 45% ti):

FleXAdent™ - ideal for alignment and leveling in early to mid-stages of treatment. All niti wires exhibit a unique “Superelastic” behavior.

Superelastic behavior provides:

• Light to moderate, consistent forces.• Responsiveness to chilling.• Near consistent force over a long activation period.• Greater patient comfort over Stainless Steel wires.• Excellent resiliency, resulting in high resistance to permanent set.• High flexibility.• Leveling, torque, and rotation can be addressed simultaneously early in treatment. No need to treat each of these individually, as is the case if using Stainless Steel wires.

nickel titanium Heat Activated - tHerMAdent™

In addition, Nickel Titanium wire may also demonstrate a heat-activated "Shape Memory" effect produced through a tightly con-trolled manufacturing process.

THERMADENT™ Heat Activated wires are shape memory, heat-activated wires.

Shape memory properties exhibited by heat-activated, or thermal, Nickel Titanium wires:

• Superb flexibility at room temperature, allowing for even easier ligation. Soft in the hand.• Very responsive to chilling.• Gentle forces are initiated by intraoral heat and remain consistent throughout treatment.• Noticeably more comfortable for the patient due to low forces.• Allows for patient to control discomfort with cold water rinses.

tHerMAdent - low Force

tHerMAdent - Medium Force

FleXAdent niti Superelastic

perFect ti niti

cnA Beta iii - low Force

StAinleSS Steel - 8 Braid

StAinleSS Steel - 6 Braid

StAinleSS Steel - 3 Strand

StAinleSS Steel - Solid

early treatment Mid treatment late treatment 30

59


choosing the Best Wire For the Application - continued

nickel titanium Wire - perFect-ti™

((niti -approximately 55% ni and 45% ti):

Your customers will love the efficiency of our PERFECT-Ti™ superelastic premium wires! adenta developed this ultra smooth, hard black surface nickel titanium wire engineered specifically for reduced friction and efficient tooth movement.

• 30% less friction than traditional Nickel Titanium wire provides improved sliding mechanics.• Our highest force Superelastic NiTi wire.• Hard surface is an integral part of the wire; not a coating.• Black color nearly indistinguishable from other wires when in the mouth.• Very resilient.

cnA BetA iii wire - trident™

(A titanium molybdenum wire composed of 79% Ti, 11% Mo, 6% Zr, and 4% Sn):

The characteristics of our custom designed, nickel-free Beta III Titanium wire make this perfect for use in mid- to late stages of treatment where space closure, rotation, and proper molar relationship are the goal.

• Nickel-free! Eliminates treatment concern of nickel sensitivity in patients.• Excellent formability allows easy fabrication of loops and bends for space closure and tooth movement.• Easily accepts 1st and 2nd order bends for tipping and aligning.• Very good resiliency as compared to Stainless Steel.• Approximately half the tooth-moving force of Stainless Steel.• Excellent finishing wire.• Retainer and appliance fabrication is easy with our Beta III CNA™ 14“ lengths

Stainless Steel Solid Wire - durAdent™

(Our archwires are manufactured from medical grade 304V Stainless Steel material (70% Fe, 19% Cr, 9% Ni, 1.5% Mn, 0.5% Si). these archwires can be used throughout treatment but are best suited for mid - to late stages of treatment.

• Superior surface finish.• Higher force and limited resiliency as compared with Beta III CNA™ wire.• Forces drop quickly; best suited as a finishing wire.• Easy to bend.• Greater patient discomfort when used in early treatment stages.

Stainless Steel Multi-strand Wire

(Ultimate’s three types of multi-strand wires made of medical grade Type 302SS (71% Fe, 18% Cr, 9% Ni, 1% Mn, 0.5% Si) are well suited for early stages of treatment as well as the finishing stage of detailing and retention. lower forces and better resiliency than solid Stainless Steel.

• TWISTADENT™ 3-strand (twisted) wire provides moderate forces and limited flexibility.• TWISTADENT™ Coax (6-strand) wire provides lighter to moderate forces and slightly better resiliency than 3-strand.• TWISTADENT™ 8-Braid wire provides the lightest forces of the multi-strand Stainless Steel wires, with relatively good resiliency.

packaging options:

Wire pouch - 10 wiresSingle envelope - 1 wires

Please specify your pouch option whenordering.

Please note: Mushroom and Looped wiresare not available in new pouch option.

60

nickel titanium Maximum Bend Angles

Niti is so resilient that it is tempting to bend it just a little more: but, how far can it go without being over-stressed and permanent defor-mations is introduced?

We used a three prong (.020” radius) bending plier (jaws depicted as gray circles in diagram above) to replicate the bend angle of a wire exiting a bracket. The maximum bend angle was determined by measuring, on a degree wheel, the angle of deflection prior to permanent deformation.

Maximum Bend Angle Guide

NOTE: This data is for approximate reference only. Actual bend angles will be dependent upon specifics of a particular case.Actual wire dimension, bracket position, slot edge radius, wire span, and ligating techniques, etc. will all affect maximum bend angle.

61


FleXAdent nickel titanium sizes and order info

Size 1 Size 2 Size 3 Size 45 pieces .014" NTL1014 NTL2014 NTL3014 NTL4014

FleXAdent nickel titanium superelastic

FLEXADENT Nickel Titanium superelastic - LINGUAL

Superelastic behavior provides:

• Light to moderate, consistent forces• Responsiveness to chilling• Near consistent force over a long activation period• Greater patient comfort over Stainless Steel wires• Excellent resiliency, resulting in high resistance to permanent set• High flexibility• Leveling, torque, and rotation can be addressed simultaneously early in treatment. No need to treat each of these individually, as is the case if using Stainless Steel wires

euro Form natural Form Standard Form

upper lower upper lower upper lower

10 pieces

.012" NTE012U NTE012L NT012U NT012L NTS012U NTS012L





10 pieces

.016" x .016" NTE16x16U NTE16x16L NT16x16U NT16x16L NTS16x16U NTS16x16L








FleXAdent nickel titanium Superelasticideal for alignment and leveling in early to mid-stages of treatment. Superelastic and Shape Memory characteristics provide greater patient comfort, easier ligating and long activation time.

62

Size 1 Size 2 Size 3 Size 45 pieces .014" NTL1014 NTL2014 NTL3014 NTL4014

perFect-ti niti

• Reduces sliding friction by 30%.• Our highest force Niti wire offering.• Excellent resiliency.• The ultra smooth, hard black surface is an integral part of the niti wire no coating to chip or flake. • Similar in appearance to regular Niti wires when in the mouth.• More economical than other friction-reducing archwires on the market.

perFect-ti nickel titanium sizes and order info



10 pieces

.012" PNTE012U PNTE012L PNT012U PNT012L PNTS012U PNTS012L





10 pieces

.016" x .016" PNTE16x16U PNTE16x16L PNT16x16U PNT16x16L PNTS16x16U PNTS16x16L








perFect-ti niti Arches - 30% less frictionlower friction equates to faster results…perFect-ti nickel titanium wire produces 30% less friction between bracket and wire than traditional nickel titanium wire!

perFect-ti nickel titanium superelastic

63


FLEXADENT™ REVERSE CURVE Nickel Titanium Archwires

FLEXADENT™ REVERSE CURVE Nickel Titanium wires provide light to moderate, constant forces. These wires are flexible and exhibit excellent resiliency.

REVERSE CURVE Nickel Titanium

• Bite opening or closing.• Initial leveling and aligning.• Arch consolidation and expansion.• Deep and open bite correction.• Retraction of flared, protruding incisors.

Available in both FLEXADENT™ Nickel Titanium and THERMADENT™ Heat-activated Medium Force archwires.

.

FLEXADENT™ REVERSE CURVE - 5 archforms available

REVERSE CURVE RCS1

Moderate radius exerts ideal force

for correction of severe curve of spee

cases.

REVERSE CURVE RCS3

provides a lighter more gentle force.

it is easier to ligate and provides

gentler, more comfor-table tooth

movement.

REVERSE CURVE RCS5

Straight leg design provides multiple solutions.

- tilting back molars for anchorage purposes

- easily puts curve of spee on the upper arch and can be used to torque the molars buccally.

- intrusion or extrusion of anterior teeth can also be accomplished.

- When flipped, it can be used to expand the lower arch.

REVERSE CURVE RCS4

provides excellent molar rotation and

re-alignment.

REVERSE CURVE RCS6

perfect for bite opening and clos-

ing, leveling and aligning, and

deep and open bite correction.

64

FLEXADENT™ REVERSE CURVE

FLEXADENT™ REVERSE CURVE arch sizes and order info

FLEXADENT™ REVERSE CURVE

Also available in tHerMAdent™ Heat Activated archwires

RCS1 rcS3 rcS4


10 pieces

.012" NTR1012U NTR1012L NTR3012U NTR3012L NTR4012U NTR4012L





10 pieces

.016" x .016" NTR116x16U NTR116x16L NTR316x16U NTR316x16L NTR416x16U NTR416x16L








RCS5 RCS6

upper lower upper lower

10 pieces

.012" NTR5012U NTR5012L NTR6012U NTR6012L





10 pieces

.016" x .016" NTR516x16U NTR516x16L NTR616x16U NTR616x16L








65


THERMADENT™ HEAT ACTIVATED Nickel Titanium Arches - light Forces 40°ctHerMAdent™ light Force is a heat-activated (thermal) wire specifically designed for consistent Af performance and low tooth moving forces. thermadent wire provides outstanding resiliency and exhibits true thermal performance. Soft at room temperature and in the doctor’s hand, THERMADENT™ allows for easy ligation. Outstanding shape integrity.

THERMADENT™ HEAT ACTIVATED - Light Forces

• Specially designed wire for consistent Af performance• Soft at room temperature; very easy to ligate• Great resiliency• Ideal for significant crowding cases.• Gentle forces provide for greater patient comfort• Very responsive to chilling• Square and Rectangle wire sizes provide low, consistent tooth moving forces to address torque control early in treatment

tHerMAdent™ ultrAtHerM Heat Activated wire size and order info - light Forces

THERMADENT™ HEAT ACTIVATED sizes and order info - LIGHT FORCES

product line HEAT ACTIVATED WIRES



10 pieces

.012" NNTME012U NNTME012L NNTM012U NNTM012L NNTSM012U NNTSM012L





10 pieces

.016" x .016" NNTME16x16U NNTME16x16L NNTM16x16U NNTM16x16L NNTSM16x16U NNTSM16x16L








tHerMAdent™ / heat activated niti

Size 1 Size 2 Size 3 Size 4

5 pieces.012" NNTL1012 NNTL2012 NNTL3012 NNTL4012

.014" NNTL1014 NNTL2014 NNTL3014 NNTL4014

.016" NNTL1016 NNTL2016 NNTL3016 NNTL4016

5 pieces

.016" x .016" NNTL116x16 NNTL216x16 NNTL316x16 NNTL416x16



66

tHerMAdent™ Medium Force is our specially developed heat-activated nickel titanium wire with consistent Af performance and moderate forces. this is an easy wire to work with plus the optimal forces deliver great results!

THERMADENT™ HEAT ACTIVATED- Moderate Force

• Forces fall directly between Superelastic Niti and Thermadent Light Force wires, providing optimal midrange load characteristics. • Thermadent Medium Force wire is slightly thermal at room temperature for easy ligation.• Responsive to chilling.• Excellent resiliency.

tHerMAdent™ ultrAtHerM Heat Activated wire size and order info - Medium Forces

THERMADENT™ HEAT ACTIVATED sizes and order info - Moderate ForceS

THERMADENT™ HEAT ACTIVATED Nickel Titanium Arches - Moderate Forces 35°c



10 pieces

.012" NNTE012U NNTE012L NNT012U NNT012L NNTS012U NNTS012L





10 pieces

.016" x .016" NNTE16x16U NNTE16x16L NNT16x16U NNT16x16L NNTS16x16U NNTS16x16L








Straight length

10 pieces

.012" NNTL012

.014" NNTL014

.016" NNTL016

.018" NNTL018

.020" NNTL020

Straight length

10 pieces

.016" x .016" NNTL16x16 .019" x .025" NNTL19x25

.016" x .022" NNTL16x22 .020" x .020" NNTL20x20

.017" x .025" NNTL17x25 .021" x .025" NNTL21x25

.018" x .018" NNTL18x18

.018“ x .025“ NNTL18X25

67


tHerMAdent™ Heat Activated nickel titanium reverse curve Applies continuous force for ideal movement. RCS can be used for bite correction or, with springs and elastomerics, for retraction.

THERMADENT™ Nickel Titanium RCS wires are shape-memory, heat-activated wires which are soft at room temperature for easy ligation and become fully active in the mouth. the gentle forces remain consistent throughout placement and are noticeably more comfortable for the patient. the superb flexibility reduces the chance of debonding brackets.

THERMADENT REVERSE CURVE

• Bite opening or closing.• Initial leveling and aligning.• Arch consolidation and expansion.• Deep and open bite correction.• Retraction of flared, protruding incisors.

Available in both FleXAdent™ Superelastic nickel titanium and thermadent Heat-activated Medium Force archwires.For Superelastic info please see page 00

Reverse Curve RCS1

Moderate radius exerts ideal force

for correction of severe curve of spee

cases.

reverse curve rcS3

provides a lighter force. it is easier

to ligate and provides gentler, more

comfortable tooth movement.

reverse curve rcS6

Perfect for bite opening and closing, leveling and aligning, and deep and open bite correction.

tHerMAdent™ reverse curve - 5 archforms available

REVERSE CURVE RCS5

Straight leg design provides multiple solutions.

- tilting back molars for anchorage purposes

- easily puts curve of spee on the upper arch and can be used to torque the molars buccally.

- intrusion or extrusion of anterior teeth can also be accomplished.

- When flipped, it can be used to expand the lower arch.

68

RCS1 rcS3


10 pieces

.012" NNTR012U NNTR012L NNTR312U NNTR3012L





10 pieces

.016" x .016" NNTR16x16U NNTR16x16L NNTR316x16U NNTR316x16L








tHerMAdent™ Heat Activated reverse curve wire size and order info

rcS5 rcS6


10 pieces

.012" NNTR5012U NNTR5012L NT012U NNTR6012L





10 pieces


.016" x .022" NNTR516x22U NNNTR516x22L NNTR616x22U NNTR616x22L







THERMADENT™ HEAT ACTIVATED sizes and order info

69


TRIDENT™ CNA BETA III - Nickel-free! Great formability!

easy placement of bends and loops at chair side saves time! cnA BetA iii wires bendability makes it the perfect wire forcustom tipping, aligning, space closure, rotation, and tooth movement. The resiliency and moderate tooth-moving force ofmakes it a great wire for mid- to late stages of treatment.

properties

• Safe for nickel sensitive patients.• Low modulus of elasticity.• High spring back and flexibility.• Low force-deflection rate.• Moderate stiffness. • Good corrosion resistance. • Excellent formability and bend correction without breakage• Weldable. • Smooth polished surface.

clinical applications

• Moderate stiffness for root corrections• Formability allows for intricate loop designs.• Ductility allows for placement of tie-backs. • Smaller increments of force loss during deactivation compared to Stainless Steel• Spring-back is not lost by bending. • Able to fill bracket slots earlier and correct torque. • Over correction is possible by placing bends. • Allows for larger activations. • Gentle force delivery with larger archwire sizes

trident™ cnA BetA iii

euro Form natural Form Standard Form Straight length


10 pieces

.016" CNAE016U CNAE016L CNAN016U CNAN016L CNAS016U CNAS016L CNAST016

.018" CNAE018U CNAE018L CNAN018U CNAN018L CNAS018U CNAS018L CNAST018

.032" --- --- --- --- --- --- CNAST032

.036" --- --- --- --- --- --- cnASt036

10 pieces

.016" x .016" CNAE16x16U CNAE16x16L CNAN16x16U CNAN16x16L CNAS16x16U CNAS16x16L CNAST16x16







trident™ cnA BetA iii Arches sizes and order info

product line cnA BetA iii

TRIDENT™ CNA BETA III - LINGUAL

Size 1 Size 2 Size 3 Size 4

5 pieces

.016" x .016" CNAL116x16 CNAL216x16 CNAL316x16 CNAL416x16



70

TRIDENT™ Looped Arches, with preformed Mushroom and T-Loops, are constructed of our nickel-free Beta Titanium alloy to provide consistent, gentle forces throughout treatment.

ttrident™ looped Arches provide significant benefits over Stainless Steel looped archwires

product Features

• Nickel-free Beta Titanium.• Bendable.• Smooth, polished surface.• Less force.• Larger activation range.• Gradual force decay.

treatment Benefits

• Space closure.• Provides anterior intrusion/retraction.• Allows torque or root movement of incisors.• Control of root position of posterior teeth.• Pre-formed loops and consistent force reduce chair time.• Archwire segments can be activated independently.

trident™ cnA BetA iii Mushroom loop

.016” x .022” .017 x .025” .019” x .025”


10 pieces

24.0mm CNAM2416x22U CNAM2416x22L CNAM2417X25U CNAM2417X25L CNAM2419X25U CNAM2419X25L










trident™ cnA BetA iii traditional t loop

.016” x .022” .017 x .025” .019” x .025”


10 pieces

24.0mm CNAT2416x22U CNAT2416x22L CNAT2417X25U CNAV2417X25L CNAT2419X25U CNAT2419X25L

26.0mm CNAT2616x22U CNAT2616x22L CNAT2617X25U CNAT2617X25L CNAT2619X25U CNAT2619X25L

30.0mm CNAT3016x22U CNAT3016x22L CNAT3017X25U CNAT3017X25L CNAV3019X25U CNAT3019X25L

32.0mm CNAT3216x22U CNAT3216x22L CNAV3217X25U CNAT3217X25L CNAT3219X25U CNAT3219X25L



38.0mm CNAT3816x22U CNAT3816x22L CNAT3817X25U CNAT3817X25L CNAV3819X25U CNAT3819X25L




Mushroom loop traditional t loop

Available

on request

cnA BetA iii looped Arches - where form and function meet in a nickel-free arch!

71


durAdent™ Stainless Steel Wires - ultra-smooth surface & high forces

Adenta’s Solid Stainless Steel archwires are produced of high quality medical grade Type 304VSS material with highly polished surfaces to provide reduced friction between bracket and arch. their high forces are well-suited for stabilizing positioned teeth during mid- to late stages of treatment. rectangular wires offer precise torque control for these same stages.

Stainless Steel Wire

• Superior smooth, bright finish.• Best suited as finishing wire, as forces drop quickly as teeth move.• Easy bend placement.• Good corrosion resistance• Small corner radius for better torque control

Stainless Steel wires are available in solid, and various strand options which provide more flexibility and lighter forces.

durAdent™ Stainless Steel archforms

INTERNATIONAL

NitiBeta III CNA

SS SolidSS 8-Braid

Euro

LINGUAL

NitiBeta III CNA

SS

Lingual

STANDARD

NitiBeta III CNA

SS SolidSS 8-Braid

SS CoaxSS 8-Braid

Standard

NATURAL 2

Niti

Natural

centermark: permanent etch marking

product line StAinleSS Steel

72

Straight length

10 pieces

.012" STST012

.014" STST014

.016" STST016

.018" STST018

.020" STST020

10 pieces

.016" x .016" STST16x16

.016" x .022" STST16x22

.017" x .025" STST17x25

.018" x .018" STST18x18

.018" x .025" STST18x25

.019" x .025" STST19x25

.020" x .020" STST20x20

.021" x .025" STST21x25

durAdent™ Stainless Steel



25 pieces

.012" STE012U STE012L STN012U STN012L STS012U STS012L





25 pieces

.016" x .016" STE16x16U STE16x16L STN16x16U STN16x16L STS16x16U STS16x16L








DURADENT™ Stainless Steel - LINGUAL

Size 1 Size 2 Size 3 Size 410 pieces .016" STL1016 STL2016 STL3016 STL4016

10 pieces

.016" x .016" STL116x16 STL216x16 STL316x16 STL416x16




tWiStAdent™ 3-FleX Stainless Steel 3-Strand Wirethree-Strand Stainless Steel archwires are best-suited for initial alignment and the finishing stage of treatment.

Stainless 3-Strand

• Bright surface finish.• Moderate force, but drops quickly as teeth move.• Moderate resiliency; measurably better than Solid Stainless Steel wire.

Available in:Stainless Steel 3-Strand Archwires Stainless Steel 3-Strand lengths Stainless Steel 3-Strand Spool

73


tWiStAdent ™ 3-flex

natural Form Standard Form


10 pieces

.0155" T3T155U T3T155L T3S155U T3S155L

.0175" T3T175U T3T175L T3S175U T3S175L

.0195" T3T195U T3T195L T3S195U T3S195L

.0215" T3T215U T3T215L T3S215U T3S215L

10 pieces

.016" x .016" T3T16x16U T3T16x16L T3S16x16U T3S16x16L




.019" x .025" T3T19x25U T3T19X25L T3TS19x25U T3TS19x25L

Straight length

10 pieces

.0155" T3L155

.0175" T3L175

.0195" T3L195

.0215" T3L215

10 pieces

.016" x .016" T3L16X16

.016" x .022" T3L16X22

.017" x .025" T3L17X25

.018" x .025" T3L18X25

.019" x .025" T3L19X25

Spools

10 pieces

.0155" T3R155

.0175" T3R175

.0195" T3R195

.0215" T3R215

10 pieces

.016" x .016" T3R16X16

.016" x .022" T3R16X22

.017" x .025" T3R17X25

.018" x .025" T3R18X25

.019" x .025" T3R19X25

tWiStAdent™ 6-FleX Stainless Steel 6-Strand Wireoffers low to moderate forces and relatively good resiliency. Appropriate for use in early or late treatment stages.

Stainless 6-Strand

• Bright finish.• Low to moderate forces.• Good for initial alignment.• Relatively good resiliency.• Short activation time, as forces drop quickly as teeth move.

74

tWiStAdent™ 8-FleX Stainless Steel 8-Braided Wire

Best for early and late treatment stages.

Stainless 8-Strand

• High resiliency.• Easy to ligate.• Low forces.• Great for aligning and for finishing.• Rectangle wires can be used for added torque control.

Available in:Stainless Steel 8 Braided Archwires Stainless Steel 8 Braided lengths

Straight length

10 pieces

.0155" T6L155

.0175" T6L175

.0195" T6L195

.0215" T6L215

Spools

1 piece

.0155" T6S155

.0175" T6S175

.0195" T6S195

.0215" T6S215

tWiStAdent™ 6-flex

natural Form Standard Form


10 pieces

.0155" T6T155U T6T155L T6R155U T6R155L

.0175" T6T175U T6T175L T6R175U T6R175L

.0195" T6T195U T6T195L T6R195U T6R195L

.0215" T6T215U T6T215L T6R215U T6R215L

tWiStAdent™ 6 Flex StAinleSS Steel arch sizes and order info

natural Form Standard Form euro Form lengthsupper lower upper lower upper lower lengths

10 pieces

.016" x .016" T8T16X16U T8T16X16L T8S16X16U T8S16X16L T8E16X16U T8E16X16L T8L16x16






tWiStAdent™ 8-flex

75


Stainless Steel Keyhole looped ArchesAccurate placement and consistent shape of our Keyhole loops ensure your customers great results!

Stainless Steel Keyhole looped Arches

• Medical grade 304V Stainless Steel wire.• Bright, smooth, flat surfaces.• Used in sliding mechanics for extraction space closure and in non-extraction class ii cases.• Commonly used in combination with elastics or closed coil springs.

Accurate loop placement and shapeStainless Steel Keyhole looped Arch Forms

NATURAL 2

Niti

34 & 36 mm

22 & 24 mm

NATURAL 2

Niti

38 & 40 mm

26 & 28 mm

NATURAL 2

Niti

42 & 44 mm

30 & 32 mm

Anterior loop Spacing within associated Arch Form.

Stainless Steel Keyhole looped arch sizes and infoStainless Steel Keyhole looped Arches

2 Loop 4 loop

10 10 pieces

.016" x .022" STK216x22 STK416x22

.017" x .025" STK217x25 STK417x25

.018" x .025" STK218x25 STK418x25

.019" x .025" STK219x25 STK419x25

.021" x .025" STK421x25

Anterior Loop Spacing for 2 and 4 keyhole loops measured from center of mesial loops in 2mm increments

76

SS Kobayashi ties SS ligature ties

Stainless Steel Auxiliary products

our preformed ligature and Kobayashi products are made of an-nealed 304 Stainless Steel to ensure consistent shape and predictable performance. Used in place of elastic ligatures, you will appreciate the ease with which they can be placed over the bracket and tied.

long Short

100 pieces

.010“ DLK-010

.012“ DLK-012 DLK-012K

.014“ DLK-014 DLK-014K

Stainless Steel Kobayashi ties Stainless Steel ligature ties

long Short

1000 pieces .008“ dl-008

1000 pieces .009“ dl-009

500 pieces .010“ DL-010 DLS-010

1000 pieces .012“ DL-012

Australian Wire Made of the finest stainless steel - offers superior hardness and tensile strength for a multitude of applications where exceptional resiliency is required.

Australian Wireregular regular+ Special Special+ premium premium+ Supreme

10 25 fee perSpool - 25 ft

.009 AW227-060

.010 AW228-050 AW228-060

.011 AW228-150 AW228-160

.012 AW229-000 AW229-010 AW292-020 AW229-300 AW229-040 AW229-050

.014 AW230-100 AW230-110 AW230-120 AW230-130 AW230-140 AW230-150

.016 AW231-300 AW231-310 AW231-320 AW231-330 AW231-340 AW231-350

.018 AW232-400 AW232-410 AW232-420 AW232-430 AW232-440 AW232-450

.020 AW233-500 AW233-510 AW233-520 AW233-530 AW233-540

.022 AW234-600 AW234-630

.024 AW235-700 AW235-720 AW235-730

regular - easiest to bent

regular+ - increased tensile

strength. Bends easily

Special - Higher force with minimal

breakage

Special+ - requires caution when

bending to avoid fracture

premium - More difficult to bend

occasional breakage to be expected

premium+ - Extremely resilient, not

suitable for sharp bends

Supreme - Highest degree

of resiliency, not suitable

for sharp bends

77


SS crimpableBall Hooks

SS crimpable c Stops

SS crimpable Split Stops

crimpable Stop item #

RIGHT- PK 10 SSBHr

LEFT- PK 10 SSBHl

STRAIGHT- PK 10 SSBHS

description item #

c Stop- PK 10 cStop

description item #

SPLIT STOP- PK 10 S

Stainless Steel Stop lock

description item #

Stop locK - pK 5 Sl

WrencH SlW

78

open coil Spring

niti class ii Springs

closed coil Spring

FleXAdent nickel titanium Springs

Nickel Titanium’s superelastic qualities make it the perfect material for orthodontic springs. With proper usage, NiTi springs are highly resistant to permanent set and provide comfortable, predictable forces during treatment. In comparison, stainless steel springs exert high initial forces, lose force quickly after placement, and will commonly take a permanent set.

product line NITI SPRINGS

distalizing Spring

lengths Spools

.009“ x .030“ FONT1 FONTS1

.010“ x .045“ FONT2 FONTS2

.012“ x .045“ Font3 FontS3

niti open coil Spring

9mm 12mm Force

10 pieces

.009“ x .030“ FGNT0 FGNTL0 000 grams




niti closed coil Spring

lightSpool

MediumSpool

HeavySpool

lightlength

Mediumlength

Heavylength

.009“ x .036“ dSSl9x36 dSll9x36

.010“ x .036“ DSSM10x36 DSML10X36

.010“ x .045“ DSSM10x45 DSML10X45

.011“ x .036“ DSSH11x36 DSHL11X45

niti distalizing Spring

niti class ii Spring

• Made of premium nickel titanium wire.• Provide continuous forces throughout activation.• Virtually no permanent deformation with proper usage.• Wide range of forces available.

• Springs are made of premium Nickel titanium wire.• Provide continuous retraction forces throughout activation.• Securely attached, precision designed Stainless Steel Key-end eyelets for easy attachment.

mm

10 pieces

.007“ x .020“ NTC27X20

.007“ x .024“ NTC27X24

.007“ x .026“ NTC27X26

.007“ x .030“ NTC27X23

arch form chart | nickel titanium | heat activated niti | cna beta … · 2020-02-21 · 59...

Documents