architectural design catalogue - · pdf filea design guide of quality options to help you...
TRANSCRIPT
QualitySimplicityElegance
Architectural Design Catalogue
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 1
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 2
A design guide of quality options to help you create the right look
Otis architecturals provide a broad palette of options to satisfy the requirements of the most discerning eye.This array of choices can be combined to create aunique look tailored to complement any building decor.
This catalogue is designed to simplify your elevator interior design and specification process. It can be used in conjunction with the Otis Architectural Finishes brochures to visualize and specify the precise elements to achieve the right look.
It begins with doors and frames and proceeds step by step through the elements you will need to complete your design.
The elements on each page are arranged in order from cost-effective to our premium level. Please contact your local Otis representative for specific pricing guidelines.
ContentsEntrance Frames and Doors 2
Cab Walls 3
Cab Ceilings 4
Handrails and Bumper Rails 5
Car and Hall Fixtures 6-8
Completing Your Design 9
1
(Cover) Luxury car operatingpanel in satin stainless steel,with vacuum-fluorescent position indicator, perimeterlighting suspended ceiling, vertical applied paneled walls,and round tubular handrail insatin stainless steel.
(Left) Luxury car operatingpanel in satin bronze, with LEDposition indicator.
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 1
Single-Slide Door
FINISH Painted finish
Satin stainless steel
Mirror stainless steel
Satin bronze
Mirror bronze
OPTIONS Optional stainless steel or bronzekickplates are available for painted car doors (except on Gen2® models).
NOTE Single-slide doors make the most efficient use of cab space.
Doors are available in 7' or 8' heights.
Center-Opening Door
FINISH Painted finish
Satin stainless steel
Mirror stainless steel
Satin bronze
Mirror bronze
OPTIONS Optional stainless steel or bronzekickplates are available for painted cardoors (except on Gen2 models).
NOTE This higher performance door is suitable for high-traffic applications.
Doors are available in 7' or 8' heights.
Two-Speed Side Opening Door
FINISH Painted finish
Satin stainless steel
Mirror stainless steel
Satin bronze
Mirror bronze
OPTIONS Optional stainless steel or bronze kickplates are available for painted car doors (except on Gen2 models).
NOTE Two-speed doors are best suited fordeep and narrow cab configurations.
These doors are appropriate for use inhospitals or other locations wheretenants may need to move carts,furniture or other large objects.
Doors are available in 7' or 8' heights.
2
Otis offers three styles of doors—single-slide, center-opening and two-speedside opening. These can be matched with different frames and finishes toaccommodate a variety of building types and traffic patterns. Your local Otisrepresentative can assist you in determining the ideal arrangement for yourparticular needs.
Entrance Framesand Doors
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 2
$(/*2(,-3
#-(4!"(2
,./.2- 01D9>!CD19><5CC!CD55<
,9BB?B!CD19><5CC!CD55<
01D9>!2B?>I5
,9BB?B!2B?>I5
/03+ ,1H!25!B5CDB93D54!9>!C?=5!:EB9C493D9?>C#/<51C5!3?>D13D!H?EB!<?31<!.D9C
B5@B5C5>D1D9F5!D?!45D5B=9>5!3?45
3?=@<91>35#
&0-,*!"(2
,./.2- 01D9>!CD19><5CC!CD55<
,9BB?B!CD19><5CC!CD55<
01D9>!2B?>I5
,9BB?B!2B?>I5
/03+ -?D!1F19<12<5!G9D8!7<1CC213;!312#
%05/*!'5)5-(2
,./.2- 01D9>!CD19><5CC!CD55<
,9BB?B!CD19><5CC!CD55<
01D9>!2B?>I5
,9BB?B!2B?>I5
/03+ (F19<12<5!9>!$#'"!1>4!%"!491=5D5BC#-?D!1F19<12<5!?>!*5>%!5<5F1D?B!CHCD5=C#
"5.1+2!%(,-3
&0-,*!"(2
,./.2- 01D9>!CD19><5CC!CD55<!
/03+ )E=@5B!B19<C!1B5!<?31D54!&" 12?F5D85!312!6<??B#
+1>4B19<C!G9<<!25!C1D9>!?B!=9BB?B!
CD19><5CC!CD55<!G9D8!D89C!?@D9?>#
0?=5!:EB9C493D9?>C!=1H!B5AE9B5
81>4B19<C!9>!3?>:E>3D9?>!G9D8!2E=@5B
B19<C#!/<51C5!3853;!G9D8!H?EB!<?31<!.D9C!B5@B5C5>D1D9F5!6?B!3<1B96931D9?>#!
(
0C;B":4>7A4;<B"4>7"5D=@8A"A4;<B"?!8A"8!86C;E8"@A?C86C;?>"C?"@4BB8>98AB"4>7"
645"F4<<B"4B"F8<<"4B"6?=@<;4>68"F;C:"<?64<"5D;<7;>9"6?78B$",<4C"54A#"B?<;7"54A#
4>7"A?D>7"CD5D<4A"B86C;?>B"4A8"4E4;<45<8$",;>;B:8B";>6<D78"BC4;><8BB"BC88<
4>7"5A?>G8$
-4>7A4;<B"4>7"
)D=@8A"14;<B
#201-+!($,&/$)*0!$,&!%2+.'/!/$)*0!$3$)*$%*'"!
*-(%
*-(&
*-&('
*-(&
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 5
Lexan Suspended Ceiling
LIGHTING Fluorescent
FINISH (FRAME) Aluminum
Gold-tone aluminum
Eggcrate Suspended Ceiling
LIGHTING Fluorescent
FINISH (FRAME) Aluminum
Gold-tone aluminum
Downlight Ceiling
LIGHTING Incandescent
FINISH Plastic laminate
Satin stainless steel laminate
Mirror stainless steel laminate
Satin bronze laminate
Mirror bronze laminate
Perimeter Suspended Ceiling
LIGHTING Fluorescent
FINISH Plastic laminate
Satin stainless steel laminate
Mirror stainless steel laminate
Satin bronze laminate
Mirror bronze laminate
NOTE Only available with vertical applied panels. Please check with your localOtis representative for clarification.
Low-Voltage Downlight
LIGHTING Incandescent
FINISH Plastic laminate
Satin stainless steel laminate
Mirror stainless steel laminate
Satin bronze laminate
Mirror bronze laminate
4
Otis offers a range of ceiling choices—from fluorescent-lit suspended to incandescent downlit—all in a variety of finishes. Incandescent downlights offerflexibility, while fluorescents are bright and easy to maintain. Finishes includeplastic laminate, aluminum, stainless steel, and bronze.
Cab Ceilings
Custom cab ceilings available.
DC22L
DC22E
DC23
DC124
DC125
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 4
Handrails
Flat Bar
FINISH Satin stainless steel
Mirror stainless steel
Satin bronze
Mirror bronze
NOTE May be restricted in some jurisdictions.Please contact your local Otisrepresentative to determine codecompliance.
Solid Bar
FINISH Satin stainless steel
Mirror stainless steel
Satin bronze
Mirror bronze
NOTE Not available with glassback cab.
Round Tubular
FINISH Satin stainless steel
Mirror stainless steel
Satin bronze
Mirror bronze
NOTE Available in 1.5" and 2" diameters.Not available on Gen2 elevator systems.
Bumper Rails
Solid Bar
FINISH Satin stainless steel
NOTE Bumper rails are located 4" abovethe cab floor.
Handrails will be satin or mirror stainless steel with this option.
Some jurisdictions may requirehandrails in conjunction with bumperrails. Please check with your local Otis representative for clarification.
5
Otis handrails and bumper rails offer effective protection to passengers and cab walls as well as compliance with local building codes. Flat bar, solid bar,and round tubular sections are available. Finishes include stainless steeland bronze.
Handrails and Bumper Rails
Custom handrails and bumper rails available.
DH50
DH51
DH154
DH51
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 5
&
.C1>41A4"(1A"
1>4"*1<<")9FCDA5B
-C9B".C1>41A4"31A"1>4"81<<"!FCDA5B#"E9C8"
C859A"BCG<9B8"!>9B85B"1>4"45B97>"651CDA5B#"
3?=29>5"CA149C9?>1<"6?A="1>4"5F35@C9?>1<"
6D>3C9?>1<9CG%"/85G"=1;5"1>"9451<"B?<DC9?>"
6?A"BC1>41A4"1@@<931C9?>B%
"&)39,#!'02.1,!53:!67(2+(5+!*(5!34,5(702.!4(2,1$02!6(702!67(021,66!67,,1!:07/!6(702!67(021,66!67,,1-5327!5,7852!(2+!9,570*(1!(4410,+!4(2,1!:(116%
'+00!)+15.31
+>C5A=5491C5"
'+00!)+15.31
/5A=9>1<
'+00!)+15.31#*24/5/21!(1-/,+523
+>C5A=5491C5"<1>49>7
'+00!*24/5/21!(1-/,+523
'+00!$65521
+>C5A=5491C5"
'+00!$65521
,?22G"!FCDA5
'+00!$65521
/5A=9>1<
'+00!&/7563.4
'DCC?>B"E9C8"9<<D=9>1C54"81<?"
%+3!&/7563.4
01>41<$A5B9BC1>C"2DCC?>B"E9C8"9<<D=9>1C54"35>C5A":5E5<
(1"%+3!)+15.31
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 6
7
Classic HallFixtures
Otis Classic hall fixtures are characterizedby their sophisticated styling and flexibility.Otis has designed each element to enhancea variety of decors—from traditional tocontemporary. Classic fixture faceplatesare available in satin or mirror stainlesssteel, or satin or mirror bronze. Hall buttonsare round with LED-illuminated halo.
Hall Fixtures
Hall Lantern
Hall Lantern/Position IndicatorIntermediate landing
Hall Position Indicator
Hall Button
Vandal-resistant buttons with illuminated center jewel
Buttons with illuminated halo
(Above) Satin stainless steel, single-slide door with classic hall lantern/position indicator.
ArchCata_Mech_REV 6-7-2006 7/24/06 12:16 PM Page 7
8
Luxury Car and Hall Fixtures
Otis Luxury fixtures feature bold, innovative styling and advanced engineering. Yet their elegant, rich finishes and distinctive detailing harmonize with a broad range of decors. Luxury fixtures are available in satin or mirror stainless steel, or satin or mirror bronze.
(Above) Luxury car operating panel with swing return insatin bronze, with LED position indicator, vertical appliedpaneled walls, and flat bar handrail in satin bronze.
Vacuum-fluorescent Position Indicator
ELD Position IndicatorOnly on Gearless Elevonic® systems
Direction Indicator
Braille Signage
LED Position Indicator
Direction Indicator
Hall Lantern
Hall LanternWith arrow
Hall LanternWith arrow
Hall Fixtures (Luxury hall fixtures are not available on Otis Hydraulic Series.)
Hall Lantern/Position IndicatorIntermediate landing
Hall Position Indicator
ELD displayOnly on Gearless Elevonic systems
Hall Button
Vandal-resistant buttons with illuminated center jewel
Buttons with illuminated halo
Note: Actual fixture illumination may be different from samples shown in this brochure.
Car Fixtures
Car Operating PanelFixtures feature full seamless,swing return car operating panels, light-emitting diode(LED), electroluminescent display (ELD) or vacuum-fluorescent. A round button with LED-illuminated halo andmechanically fastened Braillealso featured.
ArchCata_Mech_REV 6-7-2006 7/24/06 12:17 PM Page 8
Completing Your Design
A variety of finishesOtis offers a full range of WilsonArt solid, patterned and wood-grain laminates as well as several paint and metalfinishes to complement your design choices. Thesefinishes can be viewed in our Architectural Finishes brochures.Please contact your Otis representative for a copy.
An assurance of qualityAs the world leader in elevators, escalators and otherpeople-moving systems, Otis has built its reputation onquality, reliability and safety. Otis architecturals are anotherexample of the high standards that are the measure ofevery Otis product.
Custom designIn addition to our broad array of standard options, we canalso provide a full range of custom components, shouldyour project demand it. For more information regardingOtis’ custom design options, please consult your local Otisrepresentative.
ArchCata_Mech_REV 6-7-2006 7/24/06 12:17 PM Page 9
www.otis.comAPD-CAT20 (0706) SAB
© Otis Elevator Company 2006. All rights reserved
Standard operating panel in satin bronze finish, withstandard car position indicator,vertical hang-on panels, and flatbar handrail in satin bronze.
ArchCata_Mech_REV 6-7-2006 7/24/06 12:17 PM Page 10