architectural maso nry specificationcorinthian c302 440x215x215 mto baroque terracotta / classico...

Pantheon Amber Ricotta Rubia Sienna Veronese

100%

3

NOT GREATER THAN

NON PRIMARYMATERIALS

70%3 Kg14-25 Kg

ALPHACRETE® CORINTHIANARCHITECTURAL MASONRY SPECIFICATION

Weathered appearance of naturally dressed, coarse textured stone

COLOURS: All colours made to order (minimum quantity required).

Features & Benefits° Weathered appearance of naturally dressed, coarse textured stone.

° Detail block is available in all of the Corinthian Colours.

° Various features can be produced within the Corinthian range and can beused as a string course to break up large elevations or add emphasis to theoverall design.

° Produce elegant architectural features with straight elevations.

° Economical and maintenance free alternative to other external finishes.

° A comprehensive selection of special shapes is available for detailingpurposes.

° Aggregates sourced from our own quarries located at Fivemiletown,Belcoo and Pomeroy.

Sustainability DataENERGY USE: 100% renewable

WATER USED: 100% rain water harvesting

RECYCLABLE: 100% of this product can be recycled

MANUFACTURING Produced in the UK from LOCATION: locally sourced materials

NON-PRIMARY: Not greater than 70%

WASTE WOOD & PLASTIC: 100% recycled

CARBON FOOTPRINT: 14 - 25 Kg CO2 / m2

CARBON REDUCTION: 3 Kg CO2 / m2

BREEAM #: ‘A’ Rating - in accordance with the BRE Green Guide to Specification.

# Building Research Establishment’s Environmental Assessment Method.

Francesco Ash Minerva Basalt Verona Sand Ernestone Buff Baroque Terracotta Classico Blanco Palazzo Sepia Palento

Venetian Red Venetian Red Detail Sporting Green

ALPHACRETE® CORINTHIANARCHITECTURAL MASONRY SPECIFICATION

MANUFACTURE: Alphacrete® Corinthian architectural masonryblocks are manufactured from quarried limestone,cement and pigment. The weathered finish of theCorinthian range is due to the most moderncomputer-controlled manufacturing process.

PLANT OF MANUFACTURE (POM):Made at our Fivemiletown Production Plant.

STANDARDS & PERFORMANCE:Manufactured and tested to category D2 withinBS EN 771-3: 2011 - Class 2 (Length: +1 / -3mm,Width: +1 / -3mm, Height: + or - 2mm).

SPORTING GREEN: AG developed the Sporting Green colour to helpachieve the requirement as prescribed by SportEngland in the design guidance notes (section 5)February 2011. AG’s Sporting Green colour will givesufficient contrast against sporting accessories.Further to this, the finish of the block work will give auniform look across all planes adding aesthetic valueto the project.

CERTIFICATION:

ISO 14001: Environmental Management.

OSHAS 18001: Occupational Health and SafetyManagement.

CE Marking: Download our Declaration ofPerformance (DOP) data at:

www.acheson-glover.com/cemarking

SPECIFICATION REFERENCE:

NBS PLUS: 45-80-50/300 Aggregate concreteblocks

F10 Brick/ block walling - 255CONCRETE FACINGBLOCKWORK

BS EN: 771-3: 2011 (category D2)

NOTES: Alphacrete masonry units are manufactured using natural stonewhich can vary slightly in tone. Where possible it is advised to orderfrom the same production run to avoid the possibility of tonevariations (shading).

We also recommend that products are selected from at least threebales, within each delivery. This will eliminate 'banding'.

Like all quality concrete products with a high cement content,Alphacrete masonry units can display the effects of efflorescence.Sometimes known as ‘white bloom’, this naturally occurringphenomenon will disappear over time and does not effect thestructural integrity of the blocks.

Care should be taken when handling Alphacrete masonry units.During transport and delivery some ‘chipping’ (up to 5%) can beexpected. These can be used for cuts and detailing.

All faces can be exposed excluding the top and bottom of the unit.

Frost ResistantT: 028 8778 4208 | www.ag.uk.com

PRODUCT DATA:product/code size in colours m2 per compressive units unit weight packs per packs per

(mm) stock available pack strength # per pack weight per pack 8 wheeler unit lorry

Corinthian C100 440x215x100 MTO Baroque Terracotta / Classico Blanco / 7.29 10 N/mm 72 19 Kg 1.37 t 13 20Ernestone Buff / Francesco Ash / Minerva Basalt / Palazzo Sepia / Palento / Pantheon Amber / Ricotta / Rubia / Sienna Veronese / Sporting Green / Venetian Red / Venetian Red Detail / Verona Sand

Corinthian C200 440x215x140 MTO Baroque Terracotta / Classico Blanco / 4.86 10 N/mm 48 26 Kg 1.25 t 13 IRE 20/GB 22Ernestone Buff / Francesco Ash / Minerva Basalt / Palazzo Sepia / Palento / Pantheon Amber / Ricotta / Rubia / Sienna Veronese / Sporting Green / Venetian Red / Venetian Red Detail / Verona Sand

Corinthian C102 440x215x100 MTO Baroque Terracotta / Classico Blanco / 7.29 10 N/mm 72 12.5 Kg 0.9 t 14 IRE 20/GB 21Hollow Ernestone Buff / Francesco Ash / Minerva Basalt /

Palazzo Sepia / Palento / Pantheon Amber / Ricotta / Rubia / Sienna Veronese / Sporting Green / Venetian Red / Venetian Red Detail / Verona Sand

Corinthian C206 440x215x140 MTO Baroque Terracotta / Classico Blanco / 4.86 10 N/mm 60 19.5 Kg 1.17 t 21 30Hollow Ernestone Buff / Francesco Ash / Minerva Basalt /


Corinthian C302 440x215x215 MTO Baroque Terracotta / Classico Blanco / 3.24 10 N/mm 40 23.5 Kg 0.94 t 21 30Hollow Ernestone Buff / Francesco Ash / Minerva Basalt /


Corinthian C101 215x215x100 MTO Baroque Terracotta / Classico Blanco / 7.29 10 N/mm 144 9.5 Kg 1.37 t 13 20Half Block Ernestone Buff / Francesco Ash / Minerva Basalt /


Corinthian C201 215x215x140 MTO Baroque Terracotta / Classico Blanco / 4.86 10 N/mm 96 13 Kg 1.28 t 13 20/21Half Block Ernestone Buff / Francesco Ash / Minerva Basalt /


Corinthian C303 215x215x215 MTO Baroque Terracotta / Classico Blanco / 3.24 10 N/mm 80 10 Kg 0.8 t 13 20/22Half Block Hollow Ernestone Buff / Francesco Ash / Minerva Basalt /


MTO - made to order (minimum order size / quantity required). # Additional unit strengths are available (N/mm) - please ask for more information.

architectural maso nry specificationcorinthian c302 440x215x215 mto baroque terracotta / classico...

Documents