architectural metal wall and roof systems · 2014-11-19 · stronger, flatter, finished acm panel,...

A R C H I T E C T U R A LM E T A L W A L L

A N D R O O FS Y S T E M S

07 40 00/CENBUYLINE 9165

F O R M M E E T SF U N C T I O N

C E N T R I A

A B O U T C E N T R I AA T M P ™

Part philosophy, part science, ATMP –Advanced Thermal and Moisture Protection –guides CENTRIA product design and manufacturing. ATMP’s goal is to maximize awall or roof system’s ability to effectivelycontrol moisture, without sacrificing thermalefficiency. This is accomplished throughdesign and engineering that leverage real-world forces of nature. Formawall embodies the principles of ATMP.

B E Y O N D G R E E N

CENTRIA Formawall is the first building envelope product to receive Cradle to CradleCertification by McDonough BraungartDesign Chemistry for its human andenvironmental health benefits.CENTRIA Versawall has alsoachieved this distinction.

CENTRIA Formawall is the most advanced insulated metal composite wall systemavailable today, providing outstanding thermal and moisture control characteristics;integrated window, louver and sunshade offerings; and unprecedented design freedom from two design series – Dimension Series® and new Graphix Series™. AllFormawall panels may be installed vertically or horizontally, and are often curved ina design. Formawall is simply the most complete wall system available today.

F O R M A W A L L® W A L L S Y S T E M

Non-absorbing closed-cell foamcore insulation that can not bedamaged by moisture

Simple, one-piece design reduces the risk of improper installation, so prevalent with multiple component wall systems

Patented, vented, rainscreen and pressure-equalized joinery makes water penetration at horizontaljoints virtually impossible

Shop-applied, non-curing sealantat the back of the horizontal jointcreates a protected, continuous,uninterrupted air and vapor barrierwhen connected to the verticalprimary seals

Thermal breaks preventheat conduction

Insulation is located outboard of supports (not between supports), maximizing its efficiency

Durable neoprene gasketdeflects water from reachingthe primary seals in verticaljoints

Double rows of protected,non-curing sealant are applied as the primary seal for moisture penetrationand air infiltration at vertical joints

CENTRIA is the world’s leading innovatorand manufacturer of high-performancebuilding enclosure systems, including insulated and non-insulated metal composite wall and roof systems and field-assembled metal wall and roof systems. The hallmark of CENTRIAsystems is advanced thermal and moisture protection combined withunprecedented design freedom. CENTRIA’sdesign, engineering and sales supportteams, backed by more than a century ofexperience, are ready to assist with yourproject.

Charlotte Bobcats Arena, Charlotte, NCArchitects:

Ellerbe Becket, Kansas City, MOOdell, Charlotte, NCThe Freelon Group, Research Triangle Park, NC

2

FOR COMPLETE DETAILS AND SPECIFICATIONS VISITww.CENTRIA.com

F O R M A W A L L® D I M E N S I O N S E R I E S®

D I M E N S I O NS E R I E SD E S C R I P T I O NI N S U L AT E D M E TA L C O M P O S I T E W A L L P A N E L S Y S T E M

S U B S T R A T E & C O R E

• Standard – 22/26 gage G-90 galvanized steel face and liner with CFC-freepolyurethane or polyisocyanurate foam-insulated core

• Optional – stainless steel face sheet, 304 stainless steel, 22 or 20 gage, smooth, embossed or striated

• Optional Durallure® coated steel, 22 gage face sheet

• Optional gages available – consult CENTRIA

J O I N E R Y

• Horizontal oriented panel – Rainscreen, pressure-equalized and drainable joinery, 1/2” nom. joint – standard

• Vertical oriented panel – Double tongue-and-groove, 1/8” nom. joint – standard

S U R F A C E F I N I S H

• Exterior – Non-directional embossed flat or striated

– Smooth flat or striated• Interior – Non-directional embossed

planked or flat– Smooth planked

PA N E L W I D T H

• Standard – 24”, 30”, 36”• Custom – 10” to 40”

PA N E L L E N G T H

• Smooth – 16’ max.• Embossed striated – 37’ max.• Embossed – 37’ max.• Smooth striated – 20’ max.• Duracast – 28’ max.

PA N E L T H I C K N E S S / D E P T H O F R E V E A L

• 2” with 1-3/16” deep reveal – standard • 3” with 2-3/16” deep reveal

“ R ” VA L U E• 2” panel with 1/2” reveal – R14• 3” panel with 1/2” reveal – R20

R-Values are based on ASTM C236 and C518 testing. Air films are included.

* All data shown for flat panels only.Consult CENTRIA for profiled panel information.


With Formawall DimensionSeries®, designers combinepanels of varying thickness,width of reveal, and profileshape to give walls uniquearticulations and shadows.

Va r y i n g R e v e a l s

S t e e p S l o p e J o i n t s

Va r y i n g

T h i c k n e s s

Combine Formawall panels of varying thickness – 2” thick or 3” thick.

Specify the width of Formawallpanel reveals – anywhere from1/2” to 6” in 1/2” increments.

With optional steep slopedjoints Formawall panels can be installed horizontallyon an angle.

O P T I O N S• Formavue® Windows – Full line of windows for any framing type that integrate mechanically

with Formawall panels for the highest performing panel/window interface

• C/S Sunshades – Attractive and functional sunshades designed specifically for thermal andstructural integration with Formawall panels and Formavue windows

• C/S Louvers – High-quality line of fixed, drainable and storm-resistant louvers engineered specifically for fast and easy integration with Formawall panels

• Durallure® Coated Steel – Explore the beauty of a natural metal. Durallure’s powerful corrosion resistant alloy reveals steel’s natural beauty without splotches or spangles

• Stainless Steel – A strikingly beautiful choice of substrate that instantly elevates any project to a higher echelon

• Duracast® Textured Finish – Create a textured wall appearance with this durable textured coating. Available in eight standard natural earthtones

Explore even more interesting wall articulations by incorporatingoptional panel profile shapes.

D S - 5 9 P r o f i l e

D S - 6 0 P r o f i l e

Knight Oil Tools, Lafayette, LAArchitect:

Donald M. Breaux ArchitectLafayette, LA

3

G R A P H I X S E R I E SD E S C R I P T I O NI N S U L AT E D M E TA L C O M P O S I T E W A L L P A N E L S Y S T E M


• Standard – 22/26 gage G-90 galvanizedsteel face and liner with CFC-freepolyurethane or polyisocyanuratefoam-insulated core

• Optional Durallure® coated steel,22 gage face sheet

• Optional gages available –consult CENTRIA

J O I N E R Y

• Horizontal oriented panel – Rainscreen,pressure-equalized and drainablejoinery, 1/2” nom. joint – standard

• Vertical oriented panel – Doubletongue-and-groove, 1/8” nom. joint –standard

• Segmented joint – 5/8” x 3/4” deep embossment with factory appliedblack gasket, standard

– Max. segments per panel – 12– Min. length of segment – 1’

S U R F A C E F I N I S H

• Exterior – Non-directional embossed– Smooth flat

• Interior – Non-directional embossedplanked or flat

– Smooth planked

PA N E L W I D T H

• Standard – 24”, 30”, 36”• Custom – 10” to 40”


• 20’ max.

PA N E L T H I C K N E S S

• 2”– standard• 3” – consult CENTRIA

“ R ” VA L U E ( a t f u l l t h i c k n e s s )

• 2” panel with 1/2” reveal – R14• 3” panel with 1/2” reveal – R20

R-Values are based on ASTM C236 and C518 testing. Air films are included

Formawall Graphix Series† segmented construction creates the illusion of multiple smaller panels from a single large wall panel – easily and economically.

• Segments can be specified as frequently as every 12” across the length ofa Formawall panel for virtually unlimited grid like design possibilities.

• Combine Formawall Graphix Series panels of varying thickness – 2” thickor 3” thick for added effect.

• Add Formawall panel reveals – 1/2” to 6” – to a Graphix Series design foreven more possibilities.

Unique segmented construction

† Patent pending.

NOTE: Graphix Series panels are not available with DS-59 or DS-60 panels, instainless steel, or with a striated surfacefinish. Maximum panel length is 20’.

E A S I L Y C R E A T E T H E S E C O M P L E X P A T T E R N S F R O M F E W E R P A N E L S

F O R M A W A L L® G R A P H I X S E R I E S™

Photo simultates segmented joints

4


The appearance of 28 individualpanels is created from just fiveGraphix Series panels.

The appearance of nine individualpanels is created from just three

Graphix Series panels.

S U B S T R AT E S• Standard – 26/26 G-90 galvanized steel face

and liner with CFC-free foam insulated core• Optional gages available, consult CENTRIA

J O I N E R Y• Double tongue-and-groove joinery with

factory-applied air and vapor seal

S U R F A C E F I N I S H• Versawall Exterior – Non-directional embossing,

striated or planked. For non-embossed and non-striated consult CENTRIA

• Versapanel Exterior – Non-directional embossing,planked or flat

• Interior – Non-directional embossing, planked• Optional Duracast textured finish is available for

Versawall and Versapanel wall applications, consult CENTRIA for panel length

PA N E L W I D T H • Versawall – 30”, 36”• Versapanel – 36”

PA N E L L E N G T H • 6’ to 40’standard• 48’ max. consult CENTRIA

PA N E L T H I C K N E S S • Versawall – 2”, 2-3/4”, 4” nom.• Versapanel – 1-3/4”, 2-1/2, 4”

“ R ” VA L U EVersawall• 2” depth – R15• 2-3/4” – R22• 4” – R30Versapanel• 1-3/4” – R14• 2-1/2” – R20• 4” – R31

R-Values are based on ASTM C236 and C518 testing. Air films are included.

V E R S AWA L L

Versawall (Cradle to Cradle certified) and Versapanel insulated metalcomposite panels install vertically to create a monolithic wall withadvanced thermal and moisture protection properties.

Architects enjoy the systems’ ability to provide long, uninterruptedsight lines – up to 48 feet. Plus, Versawall and Versapanel wall panels can be coated with CENTRIA Duracast® to provide a natural textured look.

Versapanel is extra-versatile. With its bold standing seam, Versapaneldoubles as a high-performance insulated roof when combined with itswatertight, snap-on batten cap.

V E R S A PA N E L

W A L L & R O O F S Y S T E M S

V E R S A W A L L® & V E R S A P A N E L®

D E S C R I P T I O NI N S U L AT E D M E TA L C O M P O S I T E W A L L A N D R O O F S Y S T E M


Stockton Arena and Event Center, Stockton, CAArchitect:

360° Architecture, Kansas City, MO

5

Unlike ordinary ACM – made by lamination, then fabricated into panels by a second party – FormaBond ismanufactured entirely by CENTRIA using a proprietaryreaction injection molding process. The result is astronger, flatter, finished ACM panel, with formed,pressure-equalized open, dry joinery.

The panels’ patented joinery* is engineered to prohibitthe entry of water without using sealants. Yet, becauseof its open design, this joinery also provides optimumventing to allow wall cavities to dry any residual vaporor moisture.

CENTRIA also provides window, louver and sunshadecomponents that are engineered to integrate withFormaBond panels.


• Metal – 0.032” nominal aluminum face and liner • Core – Highly cross-linked polymer that meets

fire core requirements• 8mm sheet thickness (6mm optional)• Smooth – flat ACM panel system

J O I N E R Y

All dry construction that is pressure equalized and provides ventilation to the inner wall cavity• Both rout and return and integrated

joinery available

PA N E L W I D T H

• Up to 60"


• Up to 180"

VA R I A B L E R E V E A L S

• From 1/2” to 6” in 1/2” increments. May also be colorized

C O AT I N G S

• Available in micas, metallics, and Fluorofinish

F O R M A B O N D ® W A L L S Y S T E M

Integrated Joinery

Rout & Return Joinery

D E S C R I P T I O N A L U M I N U M C O M P O S I T E WA L L PA N E L S Y S T E M

*Patent No.: US 7,007,433 B2

Commerce Bank University, Mt. Laurel, NJArchitect:

InterArch, Mt. Laurel, NJ

6


S U B S T R A T E S

• Standard 24-18 gage G-90 galvanized steel• Galvalume® steel, aluminum or stainless steel –

optional • Smooth or embossed surface texture • Optional 22 gage Durallure

C O N C E P T S E R I E S P R O F I L E S

• Lengths up to 30’• Concealed clips and fasteners• Stand-off clip provides ventilation cavity and

continuous drain plane behind panel • May be installed vertically or horizontally• Common joint design permits multiple profile

integration• Concealed extended leg option

D E S C R I P T I O N C O N C E A L E D FA S T E N E R P R E - F O R M E D WA L L PA N E L S Y S T E M

The ribs of these six interchangeable panelsare based on an identical asymmetrical form.Thousands of combinations of patterns, articulations, shadows and sight lines may be achieved by creatively combining these panels in either vertical or horizontal orientations.

C O N C E P T S E R I E S ® W A L L S Y S T E M07 40 00/CENBUYLINE 9165

C S - 2 1 0

C S - 2 6 0

C S - 6 1 0

C S - 6 2 0

C S - 6 6 0

Concealed Clip Fastener – Standard

Concealed Extended Fastener Leg – Optional

Concealed Clip Fastener – Flush

C S - 2 0 0

BiRite Food Distribution Service, Brisbane, CAArchitect:

McGinnis Chen Associates, LLPSan Francisco, CA

7

These eleven panels come in your choice of flat panelsor with reveal depths of 1”, 2” or 6”, with or withoutpencil bead stiffeners. By combining these panels ineither a vertical or horizontal fashion, you’re able tocreate thousands of combinations of attractive wallpatterns and designs.

I W S E R I E S ® W A L L S Y S T E M

S U B S T R A T E S• Standard 22-18 gage G-90 galvanized steel• Optional 24 gage IW-13A, IW-21A and IW-60A• Galvalume® steel, aluminum or stainless steel – optional • Smooth or embossed surface texture • Optional 22 gage Durallure

I W S E R I E S P R O F I L E S• Lengths up to 30’• Horizontal or vertical wall installation • Lock-joint design of IW-10A through IW-41A makes panels

interchangeable• 2” swaged laps are available in gages lighter than 18.

Not available for IW-14A and IW-60A

I W - 1 0 A

I W - 1 1 A

I W - 1 3 A

I W - 1 4 A

I W - 2 1 A

I W - 3 0 A

I W - 4 0 A

I W - 4 1 A

I W - 3 1 A

I W - 2 0 A

D E S C R I P T I O N C O N C E A L E D F A S T E N E R P R E - F O R M E D W A L L P A N E L S Y S T E M

I W - 6 0 A

4500 Wisconsin Avenue, Washington, D.C.Architect:

Shalom Baranes Associates, PC, Washington, D.C.

8


• MicroLine™ Extrusions – Slim, 2” wide aluminum trim for finishing around windows and doors, at corners and joints, and at the head and base of walls

• MicroSeam® Corners – Perfectly seamless inside or outside corners with no welds or pop rivets

• EcoScreen™ Perforated Screenwall – Shade sun, control light pollution, provide ventilation, security and more

• Liner Panels – Used for creating an attractive, finished interior for a field-assembled wall

• Firewall System – Field-assembled wall systems that employ layers of gypsum to provide UL 1-hour through 4-hour firewalls

• Quietwall™ System – Field-assembled wall system with specific sound absorption or transmission loss values

S U B S T R A T E S• Standard 24-18 gage G-90 galvanized steel• Galvalume® steel, aluminum or stainless steel –

optional • Smooth or embossed surface texture • Optional 22 gage Durallure

E X P O S E D F A S T E N E R P R O F I L E S• Horizontal or vertical wall installation • Wall and roof installation• Lengths up to 40’, consult CENTRIA for

longer lengths

CENTRIA manufactures seven exposedfastener profile panels. In addition to wallpanels, these versatile panels may also beused for roofing, liner and soffit applicationsand they are readily curved for walls,canopies, awnings, parapets, column andbeam wraps and more. And like all CENTRIA profile panels, these panels canbe mixed and matched to create virtuallyunlimited designs.

D E S C R I P T I O N E X P O S E D F A S T E N E R P R E - F O R M E D W A L L A N D R O O F P A N E L S Y S T E M

O P T I O N S

M R 3 - 3 6

B R 5 - 3 6

S T Y L E - R I B

T R 4 - 3 6

E C O N O L A P - 1 / 2 ”

E C O N O L A P - 3 / 4 ”

E X P O S E D F A S T E N E R WA L L & R O O F S Y S T E M

S U P E R - R I B


Liquor Barn, Lexington, KYArchitect:

EOP Architects, Lexington, KY

9

SRS 2-1.0 SRS 2-1.33 & SRS 2-1.5

SRS 3-1.0 SRS 3-1.33 & SRS 3-1.5

Proven performance, design flexibility andbeauty make SRS® roof systems a favorite ofarchitects who demand quality. SRS 2 featuresa 2” standing seam with integral batten andSRS 3 features a bolder 3” standing seam witha separate, continuous batten. Both systemsmechanically seam, providing exceptionalresistance to severe weather conditions, two-directional installation and easy damaged-panel replacement capability. For added “curveappeal” SRS 3 can be machine stretch-curvedon site or at the factory to convex radii as lowas 20’ in aluminum and 30’ in steel.

S R S ® S T R U C T U R A L S T A N D I N G S E A M R O O F S Y S T E M S

S R S 2

S R S 3

S D P 1 7 5

S D P 2 0 0

D E S C R I P T I O NSTRUCTURAL STANDING SEAM ROOF SYSTEMS

S U B S T R A T E S

• SRS 2 – 24-20 gage• SRS 3 – 24-18 gage• G90 galvanized steel, Galvalume,

stainless steel or aluminum

P A N E L W I D T H

• 12”, 16”, 18”

P A N E L D E P T H S

• SRS 2 – 2”• SRS 3 – 3”

P A N E L L E N G T H

• Factory-formed – up to 48’-0” max. – standard, up to 60’-0” – optional

• Field-formed – 220’-0” max.

O T H E R S T R U C T U R A L D E S I G N PA N E L S

A D P 1 0 0

A R C H I T E C T U R A L D E S I G N PA N E L S

A D P 1 0 0 B

A D P 1 0 0 C

1 0

Corporate World Headquarters, Charlotte, NCArchitect:

Little Diversified Architectural ConsultingCharlotte, NC

1.5 mil nominal Urethane Coat

2.7 mil nominal Versacor Epoxy Barrier Coat

.2 mil nominal Epoxy Primer

.8 mil nominal Polyvinylidene Fluoride Clear Coat*

.8 mil nominal Primer

.8 mil nominal Polyvinylidene Fluoride Color Coat*

Substrate



Substrate

D U R A G A R D ® P L U S

A premium, high build architectural coating providing the ultimate in color retention and fade resistance.

DURAGARD®

.5 mil nominal Polyvinylidene Fluoride Clear Coat*



Substrate

NOTE: Some standard colors require an additional PVDF clear coat

M E T A L L I C 3 - C O A T

A quality, durable coating providing the iridescence and reflectivity of a metallic surface.

Acrylic and Natural Aggregate Matrix


.8 mil nominal Polyester

Substrate

D U R A C A S T ® T E X T U R E D F I N I S H S Y S T E M * *

Factory-applied coating with an aggregate matrix providing the look and feel of natural materials. Available exclusively for Dimension Series, Versawall and Versapanel walls.

V E R S A C O R ® P L U S

A premium, high build, multi-layer coating for applications where corrosionresistance is more important.

F L U O R O F I N I S H ® * , M I C A * A N D B R I L L I A N T ™

A PVDF- or FEVE-based coating providing good durability.


Substrate

.8 mil nominal Color Coat

A V A I L A B L E S U B S T R A T E S

• Standard G-90 hot-dip galvanized steel conforming to ASTM A924 and ASTM A653structural steel

• Galvalume steel, unpainted hot-dip coatedwith aluminum-zinc alloy conforming toASTM A924 and ASTM A792 for heat andcorrosion resistance

• Stainless Steel**, Type 304 AISI architecturalgrade alloy; austenitic, non-magnetic, non-glaresurface; slight variation in surface finish

• Aluminum Alloy 3003 or 5052, and for standing seam roof panels, 3004**, available in smooth surface as a substrate

NOTE: Galvalume, stainless and aluminum may not be available for allproduct profiles or coating systems. Consult CENTRIA sales.

Galvalume offers improved heat resistance only when used unpainted.

T H E I N D U S T R Y ’ S W I D E S T A R R A Y O F C O L O R S

CENTRIA offers you a full array of colors (see CENTRIA Colors brochure) includingmicas and bright metallics.

C U S T O M C O L O R M A T C H I N G

CENTRIA is also equipped with the latest colormatching technology enabling us to providefast turnaround on even the most unique orunusual colors.

For complete information on CENTRIA coatingsystems, contact us for a copy of our coatingsbrochure.

CENTRIA has devoted more than 100 years tothe art and science of producing metal wallsand roofs that impart the very best in aestheticsand performance. This includes a wide varietyof high-quality coating systems, a full palette of colors and a range of substrates and surfacetextures to meet even the most demandingenvironmental conditions.

*Polyvinylidene Fluoride (PVDF) coat contains 70% Kynar 500 orHylar 5000 resin. Kynar 500 is a Reg. TM of Atofina Chemicals, Inc.Hylar 5000 is a Reg. TM of Solvay Solvents, Inc. Galvalume is aReg. TM of BIEC International, Inc.

**Subject to minimum quantity requirements.

C O A T I N G S Y S T E M S & S U B S T R A T E S07 40 00/CENBUYLINE 9165

11


800.759.74741005 Beaver Grade Road, Moon Township, PA 15108-2944

412.299.8000; Fax: 412.299.8317

Reference CAS-9/06 LO/MH Copyright © 2007 CENTRIA Printed in U.S.A.

Baltimore, MDPhone: 410.549.6018Fax: 410.795.5984

Boston, MAPhone: 978.779.7929Fax: 978.779.7930

Hartford, CTPhone: 860.659.4045Fax: 860.659.4034

Newark, NJPhone: 973.857.1405Fax: 973.857.1406

New York, NYPhone: 914.834.7697Fax: 914.833.1843

Philadelphia, PAPhone: 215.643.6040Fax: 215.643.0629

Pittsburgh, PAPhone: 412.299.8175Fax: 412.299.8016

Syracuse, NYPhone: 315.214.3753Fax: 315.214.3753

Washington, DCPhone: 703.406.9588Fax: 703.406.9457

Dallas, TXPhone: 469.675.0917Fax: 972.390.9103

Denver, COPhone: 303.743.7430Fax: 303.743.7451

Des Moines, IAPhone: 630.922.3303Fax: 630.922.3833

Houston, TXPhone: 281.397.9900Fax: 281.397.6363

Minneapolis, MNPhone: 763.577.1417Fax: 763.577.0319

San Francisco, CAPhone: 650.369.9400Fax: 650.369.9483

St. Louis, MOPhone: 314.432.3434Fax: 314.432.6863

Seattle, WAPhone: 253.460.3779Fax: 253.460.1664

Southern California(Los Angeles)Phone: 949.589.0997Fax: 949.589.8984

NORTHEAST REGION

1.800.586.1372SOUTH CENTRAL REGION

1.800.586.1372WEST REGION

1.888.745.8527Atlanta, GAPhone: 678.947.4407Fax: 678.947.4612

Charlotte, NCPhone: 704.341.0202Fax: 704.341.0204

Cincinnati, OHPhone: 513.793.9160Fax: 513.793.9161

Detroit, MIPhone: 734.529.7256Fax: 734.529.7257

Greenville, SCPhone: 864.288.9129Fax: 864.288.7401

Indianapolis, INCell: 317.514.7330Fax: 317.566.9675

Milwaukee, WIPhone: 262.538.4415Fax: 262.538.4417

Sarasota, FLPhone: 941.342.0722Fax: 941.342.8862

Western MichiganPhone: 248.486.6867Fax: 248.486.8939

w w w . C E N T R I A . c o m

CENTRIA products have inherent sustainable characteristics. Our productsare primarily composed of steel and other metals which have been, and canrepeatedly be, recycled. Our factory foamed insulation provides an insulationvalue in excess of alternative systems saving energy cost and fuel resources.

CENTRIA also offers specific high-performance, sound-reducing products toprotect the environment from machine or process-generated noise pollution.

TM

CORPORATE ACCOUNTSPhone: 860.285.8341Fax: 860.285.8347

architectural metal wall and roof systems · 2014-11-19 · stronger, flatter, finished acm panel,...

Documents