architectural | waterproof | seismic | fire rated brochure18.pdf• ac om dates multi-directional...
TRANSCRIPT
EXPANSIO
N JO
INTS
ejaa r c h i t e c t u r a l | w a t e r p r o o f | s e i sm i c | f i r e r a t e dBurj Khalifa - Dubai, UAE
www.mm-usa.com 800.241.34602
1 Joint Size Joint openings may range from 1" (25 mm) to 24" (600 mm) depending upon movement criteria and otherstructural engineering considerations. Extremely wide openings of 48" (1200 mm) are not uncommon. Not alljoint cover styles can work with all joint opening sizes. Start with styles that accommodate your application.
2 Movement Type & Amount Movement types include thermal, lateral shear, wind and seismic. Thermal movement styles are typicallydesigned for smaller openings and movement ranges up to +/- 50% of the nominal opening. Seismic styles aregenerally designed for larger openings and multi-directional movement up to +/- 100% of nominal opening size.
3 Loading Requirements All horizontal cover styles will accommodate light pedestrian traffic. Many styles are appropriate for heavypedestrian or light commercial loads, such as mail carts or hand trucks. For heavy loadings such as conventioncenters, parking garages or airports, heavy-duty systems are recommended.
3
4 Fire-Rating/Life-Safety National and international building codes require fire-rated joint systems where adjacent floors and walls arerated. Test standards have changed to address pre-conditioning (cycling), smoke penetration and field splices.Specify fire barriers and cover styles from a single source to insure code compliance.
5 ADA Compliance The Americans with Disabilities Act requires that no vertical offset exist without a tapered transition. Look forand specify ADA compliant expansion joint systems. ADA compliance may require that expansion joint coversmeet certain plate thickness and beveling criteria.
6 Waterproof vs.Water-Resistant Parking structures, plaza decks, open-air stadiums and the like all require expansion joint systems to bewaterproof. Other applications may only require that cover systems be water-resistant or shed casualwater. Know and specify the difference.
8 Corner Conditions Many factors dictate where expansion joints occur. Architects and contractors cannot simply relocate a jointfor convenience. MM Systems provides hundreds of models and size choices including corner conditionsfor most floor, wall, ceiling and roof cover styles. Look for the corner condition icon.
9 Narrow Sightlines Let's face it. Expansion joints are a necessary intruder into the architectural landscape. That's why MM hasdesigned many styles with a narrow sight line. Narrow sight lines mean minimum visibility of the joint system.Look for the narrow sight line icon.
10
7 Service Environment/No-Bump Service environment defines the type of occupancy or functions occurring in the structure. Expansion Joints inhealthcare facilities, for example, must accommodate patient beds, ambulatory assistance walkers andhighly calibrated portable equipment. No-Bump models provide a safe, flush solution.
Colors/FinishesMM Systems believes that expansion joint systems should be, well, architectural joint systems. Metal substratesinclude aluminum, stainless and brass. Elastomerics are available in 8 designer colors. As a licensedKynar/Hylar applicator, MM can provide finishes on aluminum in virtually any color imaginable.
www.mm-usa.com 800.241.3460
www.mm-usa.com 800.241.34604
Product Index / System Selection & Design Guide
• ADA Compliant.
• Recess depths available in 1.5" and 2.5".
• Flush no bump floor design.
• Recessed pan receives finished floor material.
• Custom project specific designs available.
• Seismic Base Isolation Designs
• Convention Centers
• Postal Facilities
• Money Carts
• Heavy Mobile Equipment
• Heavy Pedestrian Areas
4"- 10"102 - 254
FEATURESSERIESEXPANSION JOINT SYSTEMCODES / LOADING
TRAFFIC TYPE APPLICATIONSNOMINALOPENING
2.5"- 14.5"64 - 368
SeismicThermalShear
MOVEMENTRANGE
MOVEMENTTYPE
PDS ADAPedestrian
PAN JOINT SYSTEMS
6
• Flush, no-bump designs.
• Variable recesses.
• Accommodates various floor finishes.
• Thermal and seismic movement designs.
• Hospital, Healthcare, Nursing Home
• Calibrated Equipment Environments
• Convention Centers
• Transportation Hubs
• Money Carts
• Pedestrian Bridges
1"- 24"25 - 600
0"- 24"0 - 600
SeismicThermalShear
LASB-NBRLASF-NB
PDS
ADAPedestrian
NO BUMP FLOOR COVER SYSTEMS
7
• Minimal sight line (exposed surface).
• Accommodates vertical displacement.
• Floor and wall models.
• Accepts a variety of floor finishes.
• Optional brass or stainless trim strips.
• New-to-New and New-to-Existing
• Floor-to-Floor and Corner Conditions
• Heavy Pedestrian Areas
• Carpeted Surfaces
2"- 6"51 - 152
1"- 9"25 - 229
SeismicThermalShear
HSLHSLNVSL
ADAHeavy Pedestrian
HIDDEN SIGHT LINE SYSTEMS
8
• Accommodates full seismic movement.
• Efficient centering bar cover system.
• Wide range of size/style combinations.
• Flush or surface cover styles.
• Seismic Zones
• New-to-New and New-to-Existing
• Floor-to-Floor and Corner Conditions
• Commercial and Institutional Structures
1"- 24"25 - 600
0"- 27"0 - 686
SeismicThermalShear
LASDLASFLASTLASBLSSB
ADAPedestrian
Seismic
SEISMIC FLOOR COVER SYSTEMS
9
• Accommodates vertical displacement.
• Durable aluminum frames and covers.
• Exposed or recessed cover styles.
• Accepts a variety of floor finishes.
• New-to-existing and corner styles available.
• New-to-New and New-to-Existing• Floor-to-Floor and Corner Conditions• Tile or Carpet Floor Finishes• High Traffic Areas• Airports• Shopping Malls• Educational Facilities
1"- 4"25 - 102
0"- 6"0 - 152
SeismicThermalShear
HFXHFXEEHFXHFXR
HFXEMHFXREH
ADAPedestrian
CLASSIC COVER SYSTEMS
10
• Rugged, extra heavy duty design.
• Surface mount and block-out installation.
• Thermal and seismic movement designs.
• Low, minimal bump designs.
• Transportation Hubs
• Convention Centers
• Postal Facilities
• Money Carts
• Heavy Mobile Equipment
• Pedestrian Bridges
2"- 24"52 - 600
1"- 27"25 - 686
SeismicThermalShear
HDLSSP
HPDSHDM
EEHFXXPD
ADAPedestrian
ForkliftLimited Vehicular
HEAVY DUTY FLOOR COVER SYSTEMS
11
• Load rated heavy-duty aluminum slide plates.
• HFP hinge design accommodates vertical offsetsin concrete decks.
• Optional fabric reinforced rubber waterproofinggutters.
• ADA compliant non-slip raised pattern designs.
• Surface Mount Applications
• Gym Floors
• Carpet/Tile
• Concrete/Wood Floors
1"- 24"25 - 600
0"- 27"0 - 686
HFPX-USNASJHCPSP
ADAPedestrian
SURFACE MOUNT METAL FLOOR COVER SYSTEMS
12Thermal
Vertical
• Colored rubber multi-web seal profile accommodates expansion and compression.
• No mechanical anchors or metal components.
• Seal profiles are ADA compliant and provide asmooth transition for pedestrian traffic areas.
• Model ECS is for horizontal applications. Model VCS is for vertical applications.
• Vertical Precast & Perimeter Walls• Color Matching of Wall Finishes• Sidewalk Areas• Parking Deck Drive Lanes• Concourse Areas• Pedestrian Bridges
1.3"- 3.8"33 - 97
.9"- 5.5"23 - 140
ECSVCS
HorizontalVertical
ELASTOPRENE COMPRESSION SEALS
13 Thermal
Dimension shown in inches and millimeters.
www.mm-usa.com 800.241.3460 5
• Flush sight line minimizes appearance.
• Seals available in four standard colors.
• Matching sight lines for floors and walls.
• Wide range of frame styles.
• No Bump• New-to-New or New-to-Existing• Floor-to-Floor and Floor-to-Wall• Color Coordination to Adjacent Surfaces• Carpet or Tile Insets for Floors• Mud-In Frames for Walls
1"- 12"25 - 305
FEATURESSERIESEXPANSION JOINT SYSTEMCODES / LOADING
TRAFFIC TYPE APPLICATIONSNOMINALOPENING
.65"- 18"17 - 450
SeismicThermalShear
MOVEMENTRANGE
MOVEMENTTYPE
ADAPedestrian
Vertical
FLUSHLINE FLOOR AND WALL SYSTEMS
1415
• Seals available in decorator colors.
• Wall and ceiling frame styles.
• Replaceable elastomeric seals.
• Mud-in frames for gypsum walls.
• Gypsum Walls• Gypsum or Drop Ceiling Applications• Interior Vertical Openings• Color Coordination to Adjacent Surfaces• Cost-Effective Designs• Flat-to-Flat and Corner Conditions
1"- 5"25 - 127
.5"- 7.5"13 - 191
SeismicThermalShear
KXVSWCXVSGDXVSS
Vertical
FLEXIBLE WALL AND CEILING SYSTEMS
16
• Seismic seal snap locked into aluminum frames.
• No visible aluminum or hardware.
• Visual seals available in colors.
• Resistant to UV, o-zone, acid rain, most chemicals and extreme temps.
• Vertical Seismic Joints
• Vertical Precast
• Available Secondary Water Seal
• Color Matching of Wall Finishes
2"- 24"52 - 610
1"- 36"25 - 914
SeismicThermalShear
VSS VerticalSoffit
Ceilings
VERTICAL SEALING SYSTEMS
17
• Preformed silicone strip bonded to a rectangularpolyurethane backer creates a binary sealingsystem.
• System conforms to irregular openings and is soundproof, dust-proof, water and air tight.
• Engineered 1/2" thick preformed silicone strip virtually eliminates possibility of punctures.
• Resistant to UV, ozone, and extreme temperatures.
• Color Matching of Wall Finishes• Vertical Brick & Block Walls• Vertical Precast & Perimeter Walls• Abutments• Stair Tower & Slab-to-Wall Conditions• Vertical Joints with No Blockouts• Irregular Expansion Joint Openings
1"- 5"25 - 127
.5"- 7.5"13 - 191
SeismicThermal
ESSSIF
Vertical
Horizontal Requires
CoverCOLORJOINT SILICONE SYSTEMS
1819
2223
• Seismic centering device.
• Solid aluminum construction.
• Surface and flush mount options.
• Durable and vandal resistant.
• Anodized finish standard.
• Interior Walls and Ceilings
• Exterior Walls and Soffits
• Watertight Moisture Barrier
• Kynar‚ Color Options
1"- 24"25 - 600
20"- 48"508 - 1200
SeismicThermalShear
ASCASCLASKASKL
VerticalHorizontal
Ceiling Soffit
SEISMIC METAL WALL SYSTEMS
20
• Sturdy and durable aluminum covers.
• Standard anodized or Kynar‚ 500®/Hylar‚ 5000® finishes.
• Accepts most wall finishes.
• Durable.
• Gypsum, Block or Other Substrates
• Wall or Ceiling Applications
• Flat-to-Flat and Corner Conditions
• Interior Vertical Applications
• Color Coordination to Adjacent Surfaces
1"- 8"25 - 203
0"- 12"0 - 305
SeismicThermalShear
FX-KFX-LEX-KEX-LX-MX-N
Vertical
METAL WALL AND CEILING SYSTEMS
21
• Seismic centering devices.
• Resistant to UV, o-zone, acid rain, most chemicals and extreme temps.
• Resistant to snow loads.
• Flat or slopped roofs.
• Kynar‚ Color Options
• Watertight
• Roof and Exterior Walls and Soffits
• Ice and Snow Load Rated
1"- 24"25 - 600
0"- 36"0 - 914
ERFERJRXHRXRWJK
Non-trafficHorizontal
Vertical
ROOF JOINT SYSTEMS
• ASTM Test Standards E-119, E-1399 and E-1966.• Additional Standards: UL 263, UL 2079, UBC
43-1, UBC 7-1, ANSI A2.1 and NFPA 251.• Available in 2, 3 and 4 hour ratings and
cycle tested for class I, II and III movement including lateral shear.
• Listed with UL, Omega Point Laboratories, Intertek, California State Fire Marshall and ICBO Evaluation Service.
• Horizontal Concrete Joint Openings
• Vertical Concrete & Masonry Joint Openings
• Vertical Gypboard Joint Openings
1"- 32"25 - 813
0"- 48"0 - 1219
Pyro-FlexSystems
Fire Ratings:1 hour2 hour3 hour4 hour
FIRE BARRIER SYSTEMS
2425
FSFSEFSS
FSSRFSSTFSNE
FSXFSWFSWLFSA
FSWPFDTWD
Dimension shown in inches and millimeters.
SeismicThermalShear
SeismicThermalShear
www.mm-usa.com 800.241.34606
MM Pan Joint Systems
Heavy duty pan system is a nearly invisibleand capable of accommodating multi-directionalseismic, vertical displacement and parallellateral shear movement. Accommodatesmost flooring materials and stays flush duringthermal movement while rising upward duringa seismic event.• Pan design accommodates a variety of floor finishes.
• Flush, minimal sightline design.
• Thermal and seismic movement range designs.
• Responds to severe movement with liftingaction to minimize damage and maintainfunctionality.
Product Features
Performance Data Recessed Pan Cover• Accepts most flooring• Accommodates multi-directionalmovement
.
SeismicCentering Bar
.
Aluminum Base Frame
.
Series PDSFloor-to-Floor / Inlay Flooring OptionsNominal Joint Openings 4" to 10"
Series PDSEFloor-to-Wall / Inlay Flooring OptionsNominal Joint Openings 3" to 12"
Movement TablePDSPDS-400PDS-600PDS-800PDS-1000
Nominal“JT”
Joint Opening "JT"
4.0"6.0"8.0"10.0"
102152203254
2.5"2.5"2.5"2.5"
64646464
8.5"10.5"12.5"14.5"
216267318368
TotalMovement
Sight Line“SL”
6.0"8.0"10.0"12.0"
152203254305
15.8125"17.8125"19.8125"23.8125"
402452503605
Min. Max.
PDSEPDSE-300PDSE-400PDSE-600PDSE-1200
Nominal“JT”
Joint Opening "JT"
3.0"4.0"6.0"12.0"
47102152305
1.5"2.0"1.0"1.0"
38512525
4.0"6.0"8.5"16.0"
102152216406
TotalMovement
Sight Line“SL”
2.5"4.0"7.5"15.0"
64102191381
6.938"9.750"14.00"14.00"
176248356356
Min. Max.
PDSWPDSW-300PDSW-400PDSW-600PDSW-1200
Nominal“JT”
Joint Opening "JT"
3.0"4.0"6.0"12.0"
47102152305
1.5"2.0"1.0"1.0"
38512525
4.0"6.0"8.5"16.0"
102152216406
TotalMovement
Sight Line“SL”
2.5"4.0"7.5"15.0"
64102191381
6.938"9.750"14.00"14.00"
176248356356
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models. Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
Series PDSWWall-to-Wall / Inlay Wall OptionsNominal Joint Openings 3" to 12"
SL
JT
www.mm-usa.com 800.241.3460 7
MM No Bump Floor Cover Systems
ADA-compliant styles accommodate thermaland seismic movement while eliminating problematic bumps.• Flush no bump floor designs ideal for bump sensitive applications.
• ADA – compliant styles accommodate thermal and seismic.
• Variable recesses accommodate a variety of floor finishes to include, but not limited to; carpet, tile and terrazzo.
• Thermal and seismic movement range designs.• Available in aluminum, bronze, brass andstainless steel covers.
Product Features
Performance Data
LASB-NBRLASB-NBR 1-1LASB-NBR 2-1LASB-NBR 3-1.5LASB-NBR 4-2LASB-NBR 6-3
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"
255176102152
.25"
.25"
.25"
.25"
.25"
66666
3.0"4.0"5.0"6.0"9.0"
76102127152229
TotalMovement
Sight Line“SL”
2.75"3.75"4.75"5.75"8.75"
7095121146222
4.5"5.5"6.5"7.5"10.25"
114140165191260
* Min. Max.
LASF-NBLASF-NB 1-1LASF-NB 2-1LASF-NB 3-1.5LASF-NB 4-2LASF-NB 6-3LASF-NB 8-4LASF-NB 12-6
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"8.0"12.0"
255176102152203305
.25"
.25"
.25"
.25"
.25"
.25"
.25"
6666666
2.0"3.0"4.0"6.0"8.0"12.0"18.0"
5176102152203305457
TotalMovement
Sight Line“SL”
1.75"2.75"3.75"5.75"7.75"11.75"17.75"
447095146197298451
4.375"5.375"6.375"8.875"10.875"14.875"18.875"
111137162225276378479
* Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.* Minimum is for seismic movement. Cover will rise uo above floor cover.Table data subject to change. For current data, visit www.mm-usa.com.
Movement Table
LASBE-NBRLASBE-NBR 1-.5LASBE-NBR 2-1LASBE-NBR 3-.75LASBE-NBR 4-1LASBE-NBR 5-1.25LASBE-NBR 6-1.5LASBE-NBR 10-5
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"5.0"6.0"10.0"
255176102127152254
0.812"1.812"2.812"3.812"4.812"5.812"9.812"
21467197122148249
1.50"3.00"3.75"5.00"6.25"7.50"15.00"
387695127159191381
TotalMovement
Sight Line“SL”
1.50"2.00"2.75"4.00"5.25"6.50"14.00"
385170102133165356
2.75"3.75"4.75"6.25"7.75"7.75"16.75"
7095121159197197425
* Min. Max.
Recessed Center Plate• Standard: Aluminum - Mill Finish• Options: Stainless
BrassBronze
.
.
Aluminum Base Frame
.Recessed Extension Plate
Heavy-Duty Centering Bar
.
Series LASB-NBRFloor-to-Floor / Inlay Flooring Options
Series LASF-NBFloor-to-Floor / Metal Cover Options
Series LASFE-NBFloor-to-Wall / Metal Cover Options
LASFE-NBLASFE-NB 1-.5LASFE-NB 2-1LASFE-NB 3- .75LASFE-NB 4-1LASFE-NB 5-1.25LASFE-NB 7-3.5LASFE-NB 8-2
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"7.0"8.0"
255176102152178203
0.812"1.812"2.812"3.812"5.812"6.812"7.812"
21467197148173198
1.50"3.00"3.75"5.00"7.50"10.00"10.50"
387695127191244254
TotalMovement
Sight Line“SL”
1.50"2.00"2.75"4.00"5.25"6.50"14.00"
385170102133165356
2.75"3.75"4.75"6.25"7.75"7.75"16.75"
7095121159197197425
* Min. Max.
Series SNBNo-Bump / Floor-to-Floor / Blockout Mount
Nominal Joint Openings 4" to 10"NOTE: Also available as Floor-to-Wall system
SNB SNB-400SNB-600SNB-800SNB-1000
Nominal“JT”
Joint Opening "JT"
4.0"6.0"8.0"10.0"
102152203254
3.75"5.75"8.75"9.75"
95146222248
4.25"6.25"8.25"10.25"
108159210260
TotalMovement
Sight Line“SL”
0.5"0.5"0.5"0.5"
13131313
12.016.020.024.0
305406508610
* Min. Max.
SL
JT
Series LASBE-NBRFloor-to-Wall / Inlay Flooring Options
www.mm-usa.com 800.241.34608
MM Hidden Sight Line Systems
Hidden sight line design blends inconspicuouslywith adjacent construction while providing highload and high movement capabilities.
• Very small sightline.
• Slide plate is made of heavy steel.
• Accepts a variety of flexible floor and carpetfinishes.
• Optional brass or stainless steel trim.
• New-to-New or New-to-Existing conditions.
• Complementary wall mount available.
Product Features
Performance Data
VSLVSL 1-.5VSL 2-1VSL 3-1VSL 4-1VSL 6-1.5
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"
255176102152
0.5"1.0"2.0"3.0"4.5"
13255176114
1.5"3.0"4.0"5.0"7.5"
3876102127191
TotalMovement
Sight Line“SL”
1.0"2.0"2.0"2.0"3.0"
2551515176
0.0"0.0"0.0"0.0"0.0"
00000
Min. Max.
HSLNHSLN 2-1HSLN 4-2HSLN 6-3
Nominal“JT”
Joint Opening "JT"
2.0"4.0"6.0"
51102152
1.0"2.375"3.25"
256083
3.0"5.625"8.5"
76143216
TotalMovement
Sight Line“SL”
2.0"3.25"5.25"
5183133
0.75"0.75"0.75"
191919
Min. Max.
HSLHSL 2-1HSL 3-1.5HSL 4-2HSL 6-3
Nominal“JT”
Joint Opening "JT"
2.0"3.0"4.0"6.0"
5176102152
1.0"1.625"2.375"3.25"
25416083
3.0"4.375"5.625"8.5"
76111143216
TotalMovement
Sight Line“SL”
2.0"2.75"3.25"5.25"
517083133
0.75"0.75"0.75"0.75"
19191919
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
Movement Table
.
SL
JTHeavy-DutyAluminum Base Member
.
Adjustable Carpet / Floor Support Frame
Seismic Mechanism(Shear & Vertical Displacement)
Series HSLFloor-to-Floor / Blockout Mount
Series HSLNFloor-to-Floor / New-to-Existing
Floor-to-Wall (Similar)
Series VSLWall-to-Wall
.
.Optional Stainless or Brass Trim Strip
.
Spring Steel Slide Plate
www.mm-usa.com 800.241.3460 9
Engineered floor cover systems provide seismicmovement capability, durability and a widerange of size and style combinations.• Centering bar cover system accommodates fullseismic movement range.• Wide range of size/style combinations accommodates various conditions.• Recess or surface bearing cover styles.• Available in aluminum (standard), bronze, brassand stainless steel covers.• Accommodates any joint size.
Product Features
Performance Data
Movement TableSeries LASD
Floor-to-Floor / Blockout MountNominal Joint Openings 1" to 18"
NOTE: Also available as Floor-to-Wall systemLASDLASD 1-1LASD 2-1LASD 3-1.5LASD 6-3LASD 12-6LASD 18-9
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"6.0"12.0"18.0"
255176152305457
.25"
.25"
.25"
.25"
.25"
.25"
666666
2.0"3.0"4.5"9.0"18.0"27.0"
5176114229457686
TotalMovement
Sight Line“SL”
1.75"2.75"4.25"8.75"17.75"26.75"
4470108222451679
3.0"4.0"5.875"9.375"18.375"27.375"
76102149238467695
Min. Max.
LASTLAST 1-1LAST 2-1LAST 3-1.5LAST 6-3LAST 12-6LAST 18-9
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"6.0"12.0"18.0"
255176152305457
.25"
.25"
.25"
.25"
.25"
.25"
666666
2.0"3.0"4.5"9.0"18.0"27.0"
5176114229457686
TotalMovement
Sight Line“SL”
1.75"2.75"4.25"8.75"17.75"26.75"
4470108222451679
3.0"4.0"5.875"9.375"18.375"27.375"
76102149238467695
Min. Max.
MM Seismic Floor Cover Systems
Series LASFFloor-to-Floor / Recess MountNominal Joint Openings 1" to 8"
NOTE: Also available as Floor-to-Wall system
LASFLASF 1-1LASF 2-1LASF 3-1.5LASF 4-2LASF 6-3LASF 8-4
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"8.0"
255176102152203
.25"
.25"
.25"
.25"
.25"
.25"
666666
2.0"3.0"4.0"6.0"8.0"12.0"
5176102152203305
TotalMovement
Sight Line“SL”
1.75"2.75"3.75"5.75"7.75"11.75"
447095146197298
4.5"5.5"8.0"9.0"13.0"17.0"
114140203229330432
Min. Max.
LASBLASB 1-1LASB 2-1LASB 3-1.5LASB 4-2LASB 6-3
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"
255176102152
.25"
.25"
.25"
.25"
.25"
66666
2.0"3.0"4.5"6.0"9.0"
5176114152229
TotalMovement
Sight Line“SL”
1.75"2.75"4.25"5.75"8.75"
4470108146222
4.5"5.5"8.0"9.0"13.0"
114140203229330
Min. Max.
LASB / 8-24LASB 8-4LASB 12-6LASB 18-9LASB 24-12
Nominal“JT”
Joint Opening "JT"
8.0"12.0"18.0"24.0"
203305457610
.25"
.25"
.25"
.25"
6666
12.0"18.0"27.0"36.0"
305457686914
TotalMovement
Sight Line“SL”
11.75"17.75"26.75"35.75"
298451679908
16.25"24.25"36.25"48.25"
4136169211226
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
Series LASTFloor-to-Floor / Blockout MountNominal Joint Openings 1" to 18"
NOTE: Also available as Floor-to-Wall system
Series LASB / 1"- 6"LASB-Aluminum / LSSB-Stainless / LBSB-Brass
Nominal Joint Openings 1" to 6"NOTE: Also available as Floor-to-Wall system
Series LASB / 8"- 24"LASB-Aluminum / LSSB-Stainless / LBSB-Brass / Floor-to-Floor / Seismic Recess Mount
Nominal Joint Openings 8" to 24"NOTE: Also available as Floor-to-Wall system
.
Seismic Centering Bar
.
Aluminum Base Frame
.
SL
JT
Recessed Flush Cover Seismic Cover Plate• Standard: Aluminum - Mill Finish• Options: Stainless, Brass, Bronze
.
Seismic Centering Bar
.
Aluminum Base Frame
.
SL
JT
Surface Mount Cover Seismic Cover Plate• Standard: Aluminum - Mill Finish• Options: Stainless, Brass, Bronze
www.mm-usa.com 800.241.346010
HFXHFX 1-1HFX 1.5-.75HFX 2-1HFX 2-2HFX 3-1.5HFX 4-2
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"2.0"3.0"4.0"
2538515176102
0.0"0.750"1.0"0.0"1.5"2.0"
0192503851
2.0"2.25"3.0"4.0"4.5"6.0"
515776102114152
TotalMovement
Sight Line“SL”
2.0"1.5"2.0"4.0"3.0"4.0"
51385110276102
5.0"6.0"6.0"8.0"9.0"10.0"
127152152203229254
Min. Max.
HFXEHFXE 1-.5HFXE 1.5-.375HFXE 2-.5HFXE 2-1HFXE 3-.75HFXE 4-1
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"2.0"3.0"4.0"
2538515176102
0.5"1.13"1.5"1.0"2.25"3.5"
132938255789
1.5"1.875"2.5"3.0"3.75"4.5"
3848647695114
TotalMovement
Sight Line“SL”
1.0"0.75"1.0"2.0"1.5"1.0"
251925513825
3.0"3.75"4.0"5.0"6.0"7.0"
7695102127152178
Min. Max.
HFXEMHFXEM 1-.5HFXEM 1.5-.375HFXEM 2-.5HFXEM 2-1HFXEM 3-.75HFXEM 4-1
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"2.0"3.0"4.0"
2538515176102
0.5"1.125"1.5"1.0"2.25"3.0"
132938255776
1.5"1.875"2.5"3.0"3.75"5.0"
3848647695127
TotalMovement
Sight Line“SL”
1.0"0.75"1.0"2.0"1.5"2.0"
251925513851
4.75"5.5"5.75"6.75"7.75"8.75"
121140146171197222
Min. Max.
HFXREHHFXREH 1-.5HFXREH 1.5-.375HFXREH 2-.5HFXREH 2-1HFXREH 3-.75HFXREH 4-1
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"2.0"3.0"4.0"
2538515176102
0.5"1.125"1.5"1.0"2.25"3.0"
132938255776
1.5"1.875"2.5"3.0"3.75"5.0"
3848647695127
TotalMovement
Sight Line“SL”
1.0"0.75"1.0"2.0"1.5"2.0"
251925513851
3.0"3.75"4.0"5.0"6.0"7.0"
7695102127152178
Min. Max.
HFXR HFXR 1-1HFXR 1.5-.75HFXR 2-1HFXR 2-2HFXR 3-1.5HFXR 4-2
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"2.0"3.0"4.0"
2538515176102
0.0"0.75"1.0"0.0"1.5"2.0"
0192503851
2.0"2.25"3.0"4.0"4.5"6.0"
515776102114152
TotalMovement
Sight Line“SL”
2.0"1.5"2.0"4.0"3.0"4.0"
51385110276102
2.0"2.5"3.0"3.0"4.0"5.0"
51647676102127
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
Flush or RecessedAluminum Cap Plate Aluminum Slide Plate
Aluminum Base Frame & Center Plate Support
.
MM Classic Cover Systems
Cover systems feature variable pocket framesand receivers to accommodate center slides.• Durable architectural aluminum frames and covers.• Exposed or recessed receiver cover styles.• Optional recessed frames accept a variety of floor finishes: carpet, tile, etc.Product Features
Performance Data
Movement Table
.
.
SL
JT
Series HFXFloor-to-Floor / Blockout Mount Nominal Joint Openings 1" to 4"
Series HFXEFloor-to-Wall
Nominal Joint Openings 1" to 4"
Series HFXEMFloor-to-Floor / New-to-ExistingNominal Joint Openings 1" to 4"
Series HFXRFloor-to-Floor / Recessed CoverNominal Joint Openings 1" to 4"
Series HFXREHFloor-to-Wall / New-to-ExistingNominal Joint Openings 1" to 4"
www.mm-usa.com 800.241.3460 11
HDLHDL 1-1HDL 2-1HDL 2-2HDL 3-1.5HDL 4-2HDL 6-2
Nominal“JT”
Joint Opening "JT"
1.0"2.0"2.0"3.0"4.0"6.0"
25515176102152
.375"1.0".375"1.5"2.0"3.0"
102510385176
2.0"3.0"4.0"4.5"6.0"9.0"
5176102114152229
TotalMovement
Sight Line“SL”
1.625"2.0"3.625"3.0"4.0"6.0"
41519276102152
4.5"6.0"7.25"8.0"9.0"13.0"
114152184203229330
Min. Max.
XPDXPD 1-1XPD 2-1
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.0"1.0"
025
2.0"3.0"
5176
TotalMovement
Sight Line“SL”
2.0"2.0"
5151
6.0"7.0"
152178
Min. Max.
EEHFXEEHFX-1-1EEHFX-2-2EEHFX-4-2
Nominal“JT”
Joint Opening "JT"
1.0"2.0"4.0"
2551102
0.00"0.00"0.00"
000
6.50"6.50"6.50"
165165165
TotalMovement
Sight Line“SL”
6.50"6.50"6.50"
165165165
10.50"11.50"13.50"
267392343
Min. Max.
HDMHDM-1-0.5HDM-2-1HDM-4-2HDM-6-3HDM-8-4HDM-12-6
Nominal“JT”
Joint Opening "JT"
1.0"2.0"4.0"6.0"8.0"12.0"
2551102152203305
0.25"0.25"0.25"0.25"0.25"0.25"
666666
3.0"3.0"6.0"9.0"12.0"18.0"
7676152229305457
TotalMovement
Sight Line“SL”
2.75"2.75"5.75"8.75"11.75"17.75"
7070146222298451
3.75"5.0"8.0"11.0"14.020.0
95127203279356508
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
MM Heavy Duty Floor Cover Systems
Durable, heavy duty designs are engineered forpunishing load environments while providing avariety of frame styles and movement capabilities.• Rugged, extra heavy-duty designs are engineeredfor heavy loads.• Surface mount and block-out installation styles.• Thermal and seismic movement range designs.• Shallow bevel, minimal bump designs accommodate wheel traffic.
Product Features
Performance Data
Movement Table
.
.
Heavy-Duty Centering Bar
.
Aluminum Base Frame
Heavy Duty Plate• Standard: Aluminum - Mill Finish• Options: Stainless
SL
JT
Series HDLFloor-to-Floor / Blockout MountNominal Joint Openings 1" to 6"
Series HDMFloor-to-Floor / Blockout MountNominal Joint Openings 1" to 12"
Series XPDFloor-to-Floor
Nominal Joint Openings 1" to 2"
Series EEHFXFloor-to-Floor / Blockout MountNominal Joint Openings 1" to 4"
www.mm-usa.com 800.241.346012
Hinged Safety Cover Plate• Heavy Duty Aluminum - Mill Finish• Slip Resistant Raised Profile• Accommodates vertical offsets
.
Anchor Plate• Mounted on High Side • Slip Resistant Raised Profile• Mounted with Insert Anchors
MM Surface Mount Metal Cover Systems
Surface mount systems do not require costlyblock-outs and are available in a wide range ofsize and movement ranges.
• No block-out design reduces installation costs.
• Simple, durable designs accommodate a varietyof floor finishes.
• Cost-effective solution for simple spans.
• No block-outs or recess required.
• Thermal and seismic movement range designs.
Product Features
Performance Data
Movement Table
Series SNFloor-to-Floor
Nominal Joint Openings 1" to 2"NOTE: Also available as Floor-to-Wall system
HCPHCP 1-1HCP 2-1
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.00"1.00"
025
2.00"3.00"
5176
TotalMovement
Sight Line“SL”
2.00"2.00"
5151
2.50"2.50"
6464
Min. Max.
HFPHFP-2-2HFP-3-3HFP-4-2
Nominal“JT”
Joint Opening "JT"
2.0"3.0"4.0"
5176102
1.00"1.00"1.00"
252525
6.00"6.00"6.00"
152152152
TotalMovement
Sight Line“SL”
5.00"5.00"5.00"
127127127
13.125"13.125"13.125"
333333333
Min. Max.
SNSN 100SN 200
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.50"1.00"
1325
1.50"3.00"
3876
TotalMovement
Sight Line“SL”
1.00"2.00"
2551
4.00"5.00"
102127
Min. Max.
ASJASJ 3-1ASJ 4-2ASJ 6-3ASJ 8-4ASJ 12-6ASJ 18-9
Nominal“JT”
Joint Opening "JT"
3.0"4.0"6.0"8.0"12"18"
76102152203305457
2.00"2.00"3.00"4.00"6.00"9.00"
515176102152229
4.00"6.00"9.00"12.00"18.00"27.00"
102152229305457686
TotalMovement
Sight Line“SL”
2.00"4.00"6.00"8.00"12.00"18.00"
51102152203305457
5.50"6.50"10.50"14.00"18.00"25.375"
140165267356457645
Min. Max.
X-U *X-U-1.5 *X-U-2 *
Nominal“JT”
Joint Opening "JT"
1.5"2.0"
3851
0.00"0.00"
00
2.75"3.00"
7076
TotalMovement
Sight Line“SL”
2.75"3.00"
7076
4.31"5.31"
110135
Min. Max.
SP *SP-1-1 *SP-1.5-1.5 *SP-2-2 *
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"
253851
0.00"0.00"0.00"
000
1.875"2.875"4.000"
4873102
TotalMovement
Sight Line“SL”
1.875"2.875"4.000"
4873102
3.00"4.00"5.875"
76102149
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.* For Fire-Ratings on XU & SP Series, contact MM Systems.Table data subject to change. For current data, visit www.mm-usa.com.
.
JT
SL
Series HFPFloor-to-Floor with Vertical OffsetsNominal Joint Openings 2.0" to 4.0"
NOTE: Also available as Floor-to-Wall system
Series X-UFloor-to-Floor with Serrated CoverNominal Joint Openings 1.5" to 2.0"
NOTE: Also available as Floor-to-Wall system
Series ASJFloor-to-Floor (3" minimum opening)Nominal Joint Openings 3.0" to 18.0"
NOTE: Also available as Floor-to-Wall system
Series HCPFloor-to-Floor with Carpet CoverNominal Joint Openings 1" to 2"
NOTE: Also available as Floor-to-Wall system
Series SPFloor-to-Floor
Nominal Joint Openings 1" to 18"NOTE: Also available as Floor-to-Wall system
www.mm-usa.com 800.241.3460 13
Black Gray Beige CustomColor Options
TotalMovement
Joint Opening “A”
0.88"
1.75"
2.63"
3.50"
4.25"
1.125"
1.375"
2.00"
22
44
67
89
108
29
40
51
0.88"
1.00"
1.12"
1.25"
1.50"
.50"
.625"
.75"
22
25
28
32
38
13
16
19
1.75"
2.75"
3.75"
4.75"
5.75"
1.625"
2.00"
2.75"
44
70
95
121
146
41
51
70
1.75"
2.75"
3.75"
4.75"
5.75"
1.625"
2.00"
2.75"
44
70
95
121
146
41
51
70
1.25"
1.75"
2.00"
2.25"
2.75"
.875"
1.25"
1.75"
32
44
51
57
70
22
32
51
Installation Width Depth "B"
2.125"
2.375"
3.063"
3.750"
4.500"
1.31"
1.69"
2.25"
54
60
78
95
114
33
43
57
Min. Max. Min. Max. Clearance
Dimension shown in inches (bold) and millimeters.Table data subject to change. For current data, visit www.mm-usa.com.
MM Elastoprene Compression Seals
Colored rubber multi-web seal profileaccommodates expansion and compression.
• No mechanical anchors or metal components.
• Splices can be heat welded or bonded with specialty adhesive.
• Seal profiles are ADA compliant and provide asmooth transition for pedestrian traffic areas.
• Model ECS available in continuous lengths for horizontal applications.
• Model VCS is a colored rubber low pressure seal for vertical applications.
• High abrasion and ultraviolet resistance.
• Cost effective and easy to install.
Product Features
Colors
Performance Data
Movement Table
Series ECS (Heavy Duty Horizontal)Slab-to-Slab / Movement .88" to 5.75"
Series VCS (Standard)Wall-to-Wall / Movement .50" to 2.75"
ECS
ECS-200
ECS-300
ECS-400
ECS-500
ECS-600
VCS-175
VCS-225
VCS-300
Series ECS (Standard Vertical)Wall-to-Wall / Movement .88" to 5.75"
Model VCSfor vertical applications
Elastoprene® Rubber Seal• ADA Compliant• Continuous seal with Color Options
• Model ECS for horizontal applications (shown below) Chamfer Edge
.ElastopreneSidewallAdhesive
.
.SL
JTSupport Ledge(Recommended for horizontal applications)
.
www.mm-usa.com 800.241.346014
Continuous Elastoprene® Seal
.
Continuous AluminumFrame & Support Plate
MM Flushline Floor Systems
Single and dual flush-gasketed floor systemsprovide an aesthetically pleasing sight linefeaturing a no-bump design in a wide range of decorator colors.• Flush sightline minimizes appearance.• Gaskets available in 8 designer colors .• Pedestrian loads only.• Variable heights available*.
Product Features
Performance Data
Movement Table
Series FSE Floor-to-Wall / Blockout MountNominal Joint Openings 1" to 3"
Series FSNEFloor-to-Floor / New-to-ExistingNominal Joint Openings 1" to 2"
.
FSFS-100FS-200FS-300
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"
255176
0.56"1.44"2.50"
143764
1.44"2.50"3.75"
376495
TotalMovement
Sight Line“SL”
.875"1.06"1.25"
222732
1.50"2.50"4.0"
3864102
Min. Max.
FSE FSE-100FSE-200FSE-300
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"
255176
0.56"1.44"2.50"
143764
1.44"2.5"3.75"
376495
TotalMovement
Sight Line“SL”
.875"1.06"1.25"
222732
1.5"2.5"4.0"
3864102
Min. Max.
FSST FSST-100FSST-150 FSST-200
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"
253851
0.81"1.375"1.56"
213540
1.25"1.56"2.44"
324062
TotalMovement
Sight Line“SL”
0.44"0.19"0.875"
11522
4.0"4.375"5.0"
102111127
Min. Max.
FSSFSS-100FSS-150FSS-200FSS-300
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"3.0"
25385176
0.81"1.375"1.56"2.44"
21354062
1.25"1.56"2.44"3.5"
32406289
TotalMovement
Sight Line“SL”
0.44"0.19"0.875"1.06"
1152227
4.0"4.375"5.0"6.0"
102111127152
Min. Max.
FSNE FSNE-100FSNE-200
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.56"1.44"
1437
1.44"2.5"
3764
TotalMovement
Sight Line“SL”
0.875"1.06"
2227
1.5"2.5"
3864
Min. Max.
FSSRFSSR-100FSSR-150FSSR-200FSSR-300
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"3.0"
25385176
0.81"1.375"1.56"2.44"
21354062
1.25"1.56"2.44"3.5"
32406289
TotalMovement
Sight Line“SL”
0.44"0.19"0.875"1.06"
1152227
1.0"1.5"2.0"3.0"
25385176
Min. Max.
Dimensions shown in inches (bold) and millimeters.Table data subject to change. For current data, visit www.mm-usa.com.
FDT FDT-100FDT-200FDT-300FDT-400FDT-600FDT-800FDT-1200
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"8.0"12.0"
255176102152203305
0.75"1.81"2.625"2.1875"4.1875"6.1875"10.1875"
19466756106157259
1.125"2.31"3.19"6.3125" 8.3125"10.3125"14.3125"
295981160211262364
TotalMovement
Sight Line“SL”
0.375"0.5"0.56"4.125"4.125"4.125"4.125"
101314105105105105
4.0"6.25"9.0"9.75"11.75"13.75"17.75"
102159229248298349451
Min. Max.
SL
JT
Series FSSFloor-to-Floor / Surface MountNominal Joint Openings 1" to 3"
Series FS Floor-to-Floor / Blockout MountNominal Joint Openings 1" to 3"
Series FSSTFloor-to-Floor / Flush-to-Tile
Nominal Joint Openings 1" to 3"
Series FSSRFloor-to-Floor / Flush-to-CarpetNominal Joint Openings 1" to 3"
Series FDTFloor-to-Floor / Blockout MountNominal Joint Openings 1" to 12"
Colors - For all rubber seals
Lunar* Prarie* Fog* Carbon* Heather Madrid Slate Statuette
*Stock Colors - Other colors subject to quantity minimums.Additional colors and matching available.
www.mm-usa.com 800.241.3460 15
WDWD-100WD-200WD-300WD-400WD-600WD-800WD-1200
Nominal“JT”
Joint Opening "JT" TotalMovement
1.0"2.0"3.0"4.0"6.0"8.0"12.0"
255176102152203305
.75"1.81"2.625"2.1875"4.1875"6.1875"10.1875"
19466756106157259
1.125"2.31"3.19"6.3125"8.3125"10.3125"14.3125"
295981160211262364
0.375"0.50"0.56"4.125"4.125"4.125"4.125"
101314105105105105
Min. Max. Sight Line“SL”
4.0"6.25"9.0"9.75"11.75"13.75"15.75"
102159229248298349451
*Stock Colors - Other colors subject to quantity minimums.Additional colors and matching available.
MM Flushline Wall Systems
Movement Table
Series FSWPWall-to-Wall / Concealed FrameNominal Joint Openings 1" to 2"
Dimensions shown in inches (bold) and millimeters.Corner styles available for most models.Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
FSWFSW-100FSW-150FSW-200FSW-300
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"3.0"
25385176
0.875"1.25"1.25"2.44"
22323262
1.25"1.69"2.375"3.50"
32436089
TotalMovement
Sight Line“SL”
0.375"0.44"1.13"1.06"
10112927
1.0"1.5"2.0"3.0"
25385176
Min. Max.
FSWL FSWL-100FSWL-150FSWL-200
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"
253851
0.875"1.25"1.25"
223232
1.25"1.69"2.375"
324360
TotalMovement
Sight Line“SL”
0.375"0.44"1.13"
101129
1.0"1.5"2.0"
253851
Min. Max.
FSA FSA-100FSA-150FSA-200FSA-300
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"3.0"
25385176
0.875"1.25"1.25"2.44"
22323262
1.25"1.69"2.375"3.50"
32436089
TotalMovement
Sight Line“SL”
0.375"0.44"1.13"1.06"
10112927
4.0"4.375"5.0"6.0"
102111127152
Min. Max.
FSWPFSWP-100FSWP-150FSWP-200
Nominal“JT”
Joint Opening "JT"
1.0"2.0"2.0"
255151
0.5625"1.5625"1.4375"
144037
1.4375"2.4375"2.5"
376264
TotalMovement
Sight Line“SL”
0.875"0.875"1.062"
222227
1.5"2.0"2.5"
385164
Min. Max.
Concealed Wall Frame
Continuous Elastoprene®Seal
.
.
Series WDWall-to-Wall / Recess Mount
Nominal Joint Openings 1" to 12"
JT
SL
Single and dual flush-gasketed wall and ceilingsystems provide a clean and narrow sightline in a wide range of decorator colors thatcoordinates with the Flushline Floor Systems.• Flush sightline minimizes overall appearance.• Gaskets available in 8 colors and narrow sight lines.• Installation can be surface or recess.• Thermal expansion & contraction up to 35%.• Available as surface mounted or mud-in modelsfor gypson board wall and ceiling applications.• Replaceable seal for maintenance or décor modifications.• Seals provided in continuous lengths.
Product Features
Colors - For all rubber seals
Performance Data
Lunar* Prarie* Fog* Carbon* Heather Madrid Slate Statuette
Series FSWWall-to-Wall / Concealed Mud FrameNominal Joint Openings 1" to 3"
Series FSWLCorner Wall / Concealed Mud FrameNominal Joint Openings 1" to 2"
Series FSAWall-to-Wall / Surface Mount
Nominal Joint Openings 1" to 3"
www.mm-usa.com 800.241.346016
Concealed Aluminum Frame Continuous
Elastoprene®Seal (See color options)
.
VSWVSW-200VSW-300VSW-400VSW-500
Nominal“JT”
Joint Opening "JT"
2.0"3.0"4.0"5.0"
5176102127
1.61"1.61"1.86"1.86"
41414747
3.0"4.5"6.0"7.5"
76114152191
TotalMovement
Sight Line“SL”
1.39"2.89"4.14"5.64"
3573105143
2.0"3.0"4.0"5.0"
5176102127
Min. Max.
KXKX-100KX-200
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.375"0.75"
1019
2.00"4.00"
51102
TotalMovement
Sight Line“SL”
1.625"3.25"
4183
1.56"2.56"
4065
Min. Max.
CXCX-100CX-200
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.375"0.75"
1019
2.00"4.00"
51102
TotalMovement
Sight Line“SL”
1.625"3.25"
4183
1.0"2.0"
2551
Min. Max.
VSGVSG-200VSG-300VSG-400VSG-500
Nominal“JT”
Joint Opening "JT"
2.0"3.0"4.0"5.0"
5176102127
1.09"1.09"1.34"1.34"
28283434
3.0"4.5"6.0"7.5"
76114152191
TotalMovement
Sight Line“SL”
1.91"3.41"4.66"6.16"
4987118156
2.0"3.0"4.0"5.0"
5176102127
Min. Max.
DX *DX-100DX-200
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.25"0.25"
66
2.375"2.375"
6060
TotalMovement
Sight Line“SL”
2.125"2.125"
5454
1.0"2.0"
2551
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.* DX is available in white only.Table data subject to change. For current data, visit www.mm-usa.com.
MM Flexible Wall and Ceiling Systems
Architectural aluminum frames with Elastoprene®seals in designer colors provide generousmovement ranges without sacrificing appearance.• Seals available in coordinating decorator colors.• Multiple styles to accommodate various conditions / applications.• Install surface mount to drywall or ceilingapplication.• Install in any exterior substrate.• Mud-In Frame for gypsum walls reduces sightline.• Resistant to UV, ozone, acid rain, most chemicalsand extreme temperatures.• Splices can be heat welded or bonded with specialty adhesive.• Continuous lengths in most applications.
Product Features
Colors - For all rubber seals
Performance Data
Movement Table Series CXCeiling-to-Ceiling
Nominal Joint Openings 1" to 2"
Series VSGCeiling-to-Ceiling
Nominal Joint Openings 2" to 5"
Series DXCeiling-to-Ceiling
Nominal Joint Openings 1" to 2"
.
*Stock Colors - Other colors subject to quantity minimums.Additional colors and matching available.
Lunar* Prarie* Fog* Carbon* Heather Madrid Slate Statuette
JT
SL
Series KX Wall-to-Wall
Nominal Joint Openings 1" to 2"
Series VSWWall-to-Wall / Concealed Mount Nominal Joint Openings 2" to 5"
www.mm-usa.com 800.241.3460 17
Series VSS-I 700 & LargerWall-to-Wall / Exterior (shown) / Interior (similar)
Nominal Joint Openings 7" to 24"+
Series VSS-I 200-600Wall-to-Wall / Interior
Nominal Joint Openings 2" to 6"
MM Vertical Sealing Systems
Vertical watertight seismic seal snap-lockedinto two aluminum frames.
• No visible aluminum or hardware.
• Engineered for multi-directional seismic movement.
• Visual seals are available in standard and custom colors.
• Resistant to UV, ozone, acid rain, most chemicalsand extreme temperatures.
• Splices can be heat welded or bonded with specialty adhesive.
• Continuous seal lengths in most applications.
Product Features
Colors - For all rubber seals
Performance Data
Movement Table
Series VSS-E 700 & LargerWall-to-Wall / Exterior (shown) / Interior (similar)
Nominal Joint Openings 7" to 24"+
Series VSS-E 200-600Wall-to-Wall / Exterior
Nominal Joint Openings 2" to 6"
VSS-EVSS-200-EVSS-300-EVSS-400-EVSS-500-EVSS-600-EVSS-700-EVSS-800-EVSS-900-EVSS-1000-E
Nominal“JT”
Joint Opening "JT"
2.0"3.0"4.0"5.0"6.0"7.0"8.0"9.0"10.0"
5176102127152178203229254
1.25"1.25"1.75"1.75"1.75"4.0"4.0"4.0"4.0"
3232444444102102102102
3.0"4.5"6.0"7.5"9.0"12.0"12.0"15.0"15.0"
76114152191229305305381381
10.0"10.0"10.0"17.0"17.0"18.0"18.0"24.0"24.0"
250250250432432457457610610
Min. Max. Seismic Max. Total ThermalMovement1.75"3.25"4.25"5.75"7.25"8.0"8.0"11.0"11.0"
4483108146184203203279279
Secondary Moisture Barrier
Snap-LockAluminum MountingFrame
Elastoprene®Weather Seal (See color options)
.
.
*Stock Colors - Other colors subject to quantity minimums.Additional colors and matching available.
Lunar* Prarie* Fog* Carbon* Heather Madrid Slate Statuette
JT
SL
VSS-IVSS-200-IVSS-300-IVSS-400-IVSS-500-IVSS-600-IVSS-700-IVSS-800-IVSS-900-IVSS-1000-I
Nominal“JT”
Joint Opening "JT" TotalMovement
2.0"3.0"4.0"5.0"6.0"7.0"8.0"9.0"10.0"
5176102127152178203229254
1.25"1.25"1.75"1.75"1.75"4.0"4.0"4.0"4.0"
3232444444102102102102
3.0"4.5"6.0"7.5"9.0"12.0"12.0"15.0"15.0"
76114152191229305305381381
10.0"10.0"10.0"17.0"17.0"18.0"18.0"24.0"24.0"
250250250432432457457610610
Min. Max. Sight Line“SL”
1.75"3.25"4.25"5.75"7.25"8.0"8.0"11.0"11.0"
4483108146184203203279279
Dimensions shown in inches (bold) and millimeters. Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
Cellular PolyurethaneBacker Block Preformed Silicone
Sealing Strip
Field AppliedSilicone Sealant
Bonds to allSubstrates and Finishes• Brick• Block• Concrete• Curtain Walls• EIFS• Window Walls• etc.
SpliceableColor Options
ESSESS-100ESS-150ESS-200ESS-250ESS-300ESS-350ESS-400ESS-450ESS-500ESS-600ESS-700
TotalMovement
Joint Opening "JT" & "SL"
1.0"1.5"2.0"2.5"3.0"3.5"4.0"4.5"5.0"6.0"7.0"
253851647689102114127152178
.50"
.75"1.0"1.25"1.5"1.75"2.0"2.25"2.5"3.0"3.50"
1319253238445157647689
1.5"2.25"3.0"3.75"4.5"5.25"6.0"6.75"7.5"9.0"10.5"
38577695114133152171191229267
.75"1.25"1.5"2.0"2.5"3.0"3.5"4.0"4.5"5.5"6.5"
19323851647689102114140165
Min. Max. Min. Max. Installation Range “JT”
1.375"1.875"2.375"2.875"3.375"3.875"4.375"4.875"5.375"6.375"7.375"
354860738698111124137162187
www.mm-usa.com 800.241.346018
..
..
.
.
SLJT
MM ColorJoint / ESS Series
Engineered seismic silicone sealant factorybonded to a rectangular polyurethane backersupport system.
• Silicone sealing system conforms to irregular openings and is watertight, dust-proof, airtightand soundproof.
• Preformed silicone strip bonded to a rectangularpolyurethane backer support system.
• 3-sided bonding of seal with a primerless one-part silicone sealant.
• 1/2" thick silicone strip virtually eliminates possibility of punctures.
• Non flammable and resistant to UV, ozone, winddriven rain and extreme temperatures.
• Easy to install, no fasteners or anchors.
• Provided in 6'-0" sections.
Product Features
Performance Data
Movement Table
ESS - Engineered Seismic Silicone Sealing System
Series ESSWall-to-Wall / Movement .50" to 10.5"
Standard Colors
White Precast White Off White Limestone Aluminum Stone Bronze Black
Custom Colors
AnodizedAluminum
Gray Sandstone Ivory Champagne Buff Light Bronze
Dusty Rose Adobe Tan Rustic Brick Blue Spruce Charcoal Dark Bronze
Dimension shown in inches (bold) and millimeters.Larger sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
Series ESSCorner Wall / Movement .50" to 10.5"
Dimensions shown in inches (bold) and millimeters.Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
www.mm-usa.com 800.241.3460 19
Self-expandingMicro-cell FoamImpregnated withAcrylic Polymer .
Field Applied Dow Corning® 790Silicone Sealant
.
.
Factory applied Pressure-sensitive sidewall adhesive
.Factory Bonded DOW® 790Preformed Silicone Bellows Style Face Seal
JT
SL
Movement Table
MM ColorJoint / SIF Series
Seismic silicone face seal factory applied topolyurethane micro-cell foam impregnatedwith a waterproof polymer sealing compound.• ± 50% seismic movement capability with near zero tensile stress at bond line.• Conforms to irregular openings. • Binary silicone seal and impregnated foam nearlyeliminates possibility of punctures.• Permanently elastic. • Watertight, dust-proof, airtight, soundproof sealresilient and flexible to -39°F.• Provides interior vapor, dust, acoustical, air andsound-dampening control.• Provided in 5'-0" sections.
Product Features
Performance Data SIF - Seismic Silicone & Impregnated Foam System
Series SIFWall-to-Wall / Movement .25" to 12.0"
Colors
Precast White Limestone Gray Black Bronze Sandstone
Adobe Tan Dusty Rose Rustic Brick Blue Spruce Charcoal Natural Stone
Series SIFWall Corner / Movement .25" to 12.0"
DOW® 790 is a registered trademark of Dow CorningSIF
SIF-050SIF-075 SIF-100 SIF-125 SIF-150 SIF-175SIF-200SIF-225SIF-250SIF-275SIF-300SIF-325SIF-350SIF-375SIF-400SIF-500SIF-600SIF-700SIF-800
TotalMovement
Movement Range “A”
0.50"0.75"1.00"1.25"1.50"1.75"2.00"2.25"2.50"2.75"3.00"3.25"3.50"3.75"4.00"5.00"6.00"7.00"8.00"
1319253238445157647076838996102127152178203
0.250"0.375"0.500"0.625"0.750"0.875"1.00"1.125"1.250"1.375"1.500"1.625"1.750"1.875"2.00"2.50"3.00"3.50"4.00"
61013161922252832353841444851647689102
0.75"1.125"1.500"1.875"2.250"2.625"3.00"3.375"3.750"4.125"4.500"4.812"5.250"5.625"6.00"7.50"9.00"10.50"12.00"
192938485767768695105114122133143152191229267305
0.50"0.75"1.00"1.25"1.50"1.75"2.00"2.25"2.50"2.75"3.00"3.25"3.50"3.75"4.00"5.00"6.00"7.00"8.00"
1319253238445157647076838996102127152178203
1.50"1.50"2.00"2.00" 2.00"2.00"3.00"3.00"3.00"3.00"3.00"3.00"3.00"4.00"4.00"4.00"4.00"5.00"5.00"
38385151515176767676767676102102102102127127
Min. Max. Expansion Joint SizeNominal Seal Depth
www.mm-usa.com 800.241.346020
Dimensions shown in inches (bold) and millimeters.For bronze / stainless options or sizes not shown call MM.Table data subject to change. For current data, visit www.mm-usa.com.
ASCL 4-1ASCL 6-1.5ASCL 8-2ASCL 12-3ASCL 18-4.5
4.0"6.0"8.0"12.0"18.0"
102152203305457
2.5"2.5"2.5"2.5"2.5"
6464646464
7.0"9.5"12.0"19.0"24.0"
178241305483610
4.5"7.0"9.5"16.5"21.5"
114178241419546
6.375"8.875"11.375"18.375"23.875"
162225289467606
ASC & ASCLASC 4-2ASC 6-3ASC 8-4ASC 12-6ASC 18-9
Nominal“JT”
Joint Opening "JT"
4.0"6.0"8.0"12.0"18.0"
102152203305457
2.25"2.25"2.25"2.25"2.25"
5757575757
10.0"13.0"16.0"22.0"28.0"
254330406559711
TotalMovement
Sight Line“SL”
7.75"10.75"13.75"19.75"25.75"
197273349502654
8.75"11.75"14.75"20.75"26.75"
222298375527679
Min. Max.
ASK & ASKLASK 1-1ASK 2-2ASK 3-1.5ASK 4-2ASK 6-3ASK 8-4ASK 12-6
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"8.0"12.0"
255176102152203305
.25"
.25"
.25"
.25"
.25"
.25"
.25"
6666666
2.0"3.0"4.5"6.0"9.0"12.0"18.0"
5176114152229305457
TotalMovement
Sight Line“SL”
1.75"2.75"4.25"5.75"8.75"11.75"17.75"
4470108146222298451
4.0"5.0"6.5"8.0"11.0"14.0"20.0"
102127165203279356508
Min. Max.
ASKL 1-.5ASKL 2-.5ASKL 3-.75ASKL 4-1ASKL 6-1.5ASKL 8-2ASKL 12-3
1.0"2.0"3.0"4.0"6.0"8.0"12.0"
255176102152203305
0.5"1.5"2.125"2.125"2.125"2.125"2.125"
13385454545454
1.5"2.5"3.75"5.0"7.5"10.0"15.0"
386495127191254381
1.0"1.0"1.625"2.875"5.375"7.875"12.875"
25254173137200327
2.5"3.5"4.75"6.0"8.5"11.0"16.0"
6489121152216279406
CRS & CRSLCRS-2-1CRS-4-2CRS-6-3CRS-10-5CRSL-2-.5CRSL-4-1CRSL-6-1.5
Nominal“JT”
Joint Opening "JT"
2.0"4.0"6.0"10.0"2.0"4.0"6.0"
5110215225451102152
1.50"2.00"3.00"5.00"1.00"3.00"4.50"
3851761272576114
2.50"8.00"12.25"15.00"3.0"6.0"9.125"
6420331138176152232
TotalMovement
Sight Line“SL”
1.00"6.00"9.25"10.00"2.00"3.00"4.625"
251522352545176117
10.25"10.00"15.25"19.25"6.125"7.00"10.625"
260254387489156178270
Min. Max.
MM Seismic Metal Wall Systems
Engineered wall covers provide seismic movementin a wide range of sizes, styles and finishes. • Centering bar accommodates seismic movement.• For ceiling applications contact factory.• Standard clear anodized, optional bronze anodizedor available Kynar® 500/Hylar® 5000 finishes.
Product Features
Performance Data
Movement Table
Continuous Mounting Frame
Isolation Gasket
Seismic Aluminum Wall Cover• Standard: Clear Anodized• Options: Brass
StainlessKynar 500® Paint FinishHylar 5000® Paint Finish
..
.
.
Seismic Centering Bar
Series CRSLCorner Wall / Recessed
Nominal Joint Openings 1" to 12"
JT
SL
Series ASC Wall-to-Wall / Surface Mount
Nominal Joint Openings 4" to 18"
Series ASCLCorner Wall / Surface Mount
Nominal Joint Openings 4" to 18"
Series ASKWall-to-Wall / Surface Mount
Nominal Joint Openings 1" to 12"
Series ASKLCorner Wall / Surface Mount
Nominal Joint Openings 1" to 12"
Series CRSWall-to-Wall/ Recessed
Nominal Joint Openings 1" to 12"
www.mm-usa.com 800.241.3460 21
FX-KFX-K 1-1FX-K 1.5-1.5FX-K 2-1FX-K 2-2FX-K 3-1.5FX-K 3-3FX-K 4-2FX-K 4-4FX-K 6-3FX-K 8-4
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"2.0"3.0"3.0"4.0"4.0"6.0"8.0"
253851517676102102152203
0.0"0.0"1.0"0.0"1.0"0.0"2.0"0.0"3.0"4.0"
0025025051076102
1.50"3.0"2.50"4.0"5.0"6.0"6.0"8.0"9.0"12.0"
387664102127152152203229305
TotalMovement
Sight Line“SL”
1.50"3.0"1.50"4.0"4.0"6.0"4.0"8.0"6.0"8.0"
387638102102152102203152203
4.5"7.0"5.5"7.5"8.5"10.5"9.5"13.5"10.5"17.5"
114178140191216267241343267445
Min. Max.
FX-LFX-L 1-.5FX-L 1.5-1FX-L 2-.5FX-L 2-1FX-L 3-1FX-L 3-1.5FX-L 4-2FX-L 6-2.5FX-L 8-4
Nominal“JT”
Joint Opening "JT"
1.0"1.5"2.0"2.0"3.0"3.0"4.0"6.0"8.0"
253851517676102152203
0.5"0.5"1.375"0.5"2.375"1.875"2.31"3.81"4.38"
1313351360485997111
1.44"2.5"2.44"2.5"4.5"5.0"6.0"8.5"12.0"
37646264114127152216305
TotalMovement
Sight Line“SL”
0.94"2.0"1.06"2.0"2.125"3.125"3.69"4.69"7.625"
24512751547994119194
2.75"4.25"3.75"4.75"5.75"6.75"6.75"8.25"12.75"
7010895121146171171210324
Min. Max.
EX-LEX-L1EX-L2EX-L4EX-L6EX-L8
Nominal“JT”
Joint Opening "JT"
1.0"2.0"2.0"3.0"4.0"
25515176102
0.0"1.0"0.0"1.0"2.0"
02502551
2.0"3.0"4.0"5.0"6.0"
5176102127152
TotalMovement
Sight Line“SL”
2.0"2.0"4.0"4.0"4.0"
5151102102102
2.0"3.0"4.0"5.0"6.0"
5176102127152
Min. Max.
EX-KEX-K1EX-K2EX-K4EX-K6EX-K8
Nominal“JT”
Joint Opening "JT"
1.0"2.0"2.0"3.0"4.0"
25515176102
0.0"0.0"0.0"0.0"0.0"
00000
1.31"2.56"3.56"4.56"5.56"
336590116141
TotalMovement
Sight Line“SL”
1.31"2.56"3.56"4.56"5.56"
336590116141
3.125"4.125"5.125"6.125"7.125"
79105130156181
Min. Max.
X-MX-M-1X-M-2X-M-3
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"
255176
0.0"0.0"0.0"
000
2.88"3.50"4.25"
7389108
TotalMovement
Sight Line“SL”
2.88"3.50"4.25"
7389108
4.31"5.31"6.19"
110135157
Min. Max.
X-NX-N-1X-N-2
Nominal“JT”
Joint Opening "JT"
1.0"2.0"
2551
0.0"0.0"
00
2.50"3.50"
6489
TotalMovement
Sight Line“SL”
2.50"3.50"
6489
3.13"4.19"
80106
Min. Max.
Dimensions shown in inches (bold) and millimeters.For bronze / stainless options or sizes not shown call MM.Table data subject to change. For current data, visit www.mm-usa.com.
MM Metal Wall and Ceiling Systems
Architectural aluminum wall and ceiling systemsare available in a wide variety of materials, finishoptions and movement ranges. • Available in aluminum (standard), or brass andstainless laminate covers.• Standard clear anodized, optional bronzeanodized or available Kynar® 500/Hylar® 5000 finishes in 72 standard and custom colors.• Isolation seal protects finishes during movement.• Designs accommodate wall and ceiling applications.
Product Features
Performance Data
Movement Table
Continuous Base Member
Isolation Seal
Aluminum Cover and Center Slide Plate• Standard: Clear Anodized• Options: Brass
StainlessKynar 500® Paint FinishHylar 5000® Paint Finish
.
.
.
JT
SL
Series FX-K Wall-to-Wall
Nominal Joint Openings 1" to 8"
Series FX-LCorner Wall
Nominal Joint Openings 1" to 8"
Series EX-LCorner Wall
Nominal Joint Openings 1" to 4"
Series EX-KWall-to-Wall
Nominal Joint Openings 1" to 4"
Series X-MWall-to-Wall
Nominal Joint Openings 1" to 3"
Series X-NCorner Wall
Nominal Joint Openings 1" to 2"
www.mm-usa.com 800.241.346022
Aluminum Roof Cover with Splice Caps• Standard: Mill Aluminum• Paint Options: Kynar 500® / Hylar 5000®
.
Weather-Stop Gasket
Lock Down Centering Bar• Accommodates Wind Shear & Seismic Movement• Stainless Fasteners with Neoprene Washers
Aluminum Base Frame
Fabric Reinforced Rubber Gutter
RXHRXH 1-1RXH 2-1RXH 4-2RXH 6-3RXH 8-4RXH 12-6RXH 18-9*
Nominal“JT”
Joint Opening "JT"
1.0"2.0"4.0"6.0"8.0"12.0"18.0"
2551102152203305457
0.0"1.0"2.0"3.0"4.0"6.0"9.0"
0255176102152229
2.0"3.0"6.0"9.0"12.0"18.0"27.0"
5176152229305457686
TotalMovement
Sight Line“SL”
2.0"2.0"4.0"6.0"8.0"12.0"18.0"
5151102152203305457
4.0"5.0"8.0"11.0"14.0"20.0"29.0"
102127203279356508737
Min. Max.
RXRRXR 1-1RXR 2-1RXR 3-1.5RXR 4-2RXR 6-3RXR 8-4RXR 12-6RXR 18-9*
Nominal“JT”
Joint Opening "JT"
1.0"2.0"3.0"4.0"6.0"8.0"12.0"18.0"
255176102152203305457
0.0"1.0"1.5"2.0"3.0"4.0"6.0"9.0"
025385176102152229
2.0"3.0"4.5"6.0"9.0"12.0"18.0"27.0"
5176114152229305457686
TotalMovement
Sight Line“SL”
2.0"2.0"3.0"4.0"6.0"8.0"12.0"18.0"
515176102152203305457
4.0"5.0"6.5"8.0"11.0"14.0"20.0"29.0"
102127165203279356508737
Min. Max.
WJKWJK 1-1WJK 2-1WJK 4-2WJK 6-3WJK 8-4WJK 12-6WJK 18-9*
Nominal“JT”
Joint Opening "JT"
1.0"2.0"4.0"6.0"8.0"12.0"18.0"
2551102152203305457
0.0"1.0"2.0"3.0"4.0"6.0"9.0"
0255176102152229
2.0"3.0"6.0"9.0"12.0"18.0"27.0"
5176152229305457686
TotalMovement
Sight Line“SL”
2.0"2.0"4.0"6.0"8.0"12.0"18.0"
5151102152203305457
4.0"5.0"8.0"11.0"14.0"20.0"29.0"
102127203279356508737
Min. Max.
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.* Wider covers may require stiffner angles. Consult factory.Table data subject to change. For current data, visit www.mm-usa.com.
MM Roof Joint Systems...Metal
Aluminum cover systems engineered for thermaland seismic movement on flat and sloped roofs.Accommodates ice, snow loads, and maintenancefoot traffic. Weather gaskets seal the structuralopening and interior areas.• Aluminum systems utilize seismic centering bars.
• Aluminum covers are engineered to resist snowand wind loads.
• Standard mill finish, optional clear, bronzeanodized or available Kynar® 500/Hylar® 5000 finishes in 72 standard and custom colors.
• Integral weather-stop gasket and fabric reinforcedrubber gutter keep outside elements from penetrating the structural opening and interior areas.
Product Features
Performance Data
Movement Table
... . .
.
SL
JT
Series RXHRoof-to-Roof / Low Profile
Nominal Joint Openings 1" to 18"
Series RXRRoof-to-Roof / Raised Profile / Aluminum Cover
Nominal Joint Openings 1" to 18"
Series WJKWall-to-Wall / Roof-to-Roof
Nominal Joint Openings 1" to 18"
www.mm-usa.com 800.241.3460 23
Flexible rubber bellow systems accommodatethermal and multi-directional seismic movement,provides a weather tight seal and followscomplex directional transitions in a widevariety of roofing applications. • Flexible rubber bellows are resistant to UV, ozone, acid rain and extreme temperatures.• Accommodates complex directional transitions.• Compatible with most roofing systems.• Capable of thermal and multi-directional seismic movement.• Contoured bellows have no seams or channels totrap water.• Factory transitions available.
Product Features
Performance Data
Dimensions shown in inches (bold) and millimeters. Corner styles available for most models.Other sizes available. Call MM Systems for details.Table data subject to change. For current data, visit www.mm-usa.com.
MM Roof Joint Systems...Rubber Bellows
Movement Table
Series ERJRoof-to-Roof / Low Profile Rubber Bellows
Nominal Joint Openings 2" to 6"
ERFERF-200ERF-400 ERF-600
Nominal“JT”
Joint Opening "JT"
2.0"4.0"6.0"
51102152
0.63"0.63"1.25"
161632
3.50"5.00"9.00"
89127229
TotalMovement
Sight Line“SL”
2.88"4.38"7.75"
73111197
5.0"7.0"9.0"
127178229
Min. Max.
ERJERJ-200ERJ-400 ERJ-600
Nominal“JT”
Joint Opening "JT"
2.0"4.0"6.0"
51102152
0.63"0.63"1.25"
161632
3.50"5.00"9.00"
89127229
TotalMovement
Sight Line“SL”
2.88"4.38"7.75"
73111197
5.0"7.0"9.0"
127178229
Min. Max.
Flexible Rubber Bellows• Closed-cell rubber foam backer• PVC continuous surface membrane
Wood Cant Strip(by others)
Laminated Metal Flange Plates
Concrete Roof Deck
.
..
Note: Roof Membrane(by others) not shownfor clarity
.
SL
JT
Note: Secondary MoistureBarrier Optional
.
Series ERFRoof-to-Roof / Raised Rubber BellowsNominal Joint Openings 2" to 6"
www.mm-usa.com 800.241.346024
Performance Data
Pyro-Flex / Blockout Floor SeriesHigh performance continuous floor fire barrier system that maintains a seal to prevent smoke and fire spread when used with any floor expansion joint system.
Fire barrier systems with thermal, seismic andlateral shear capability. Used in conjunctionwith expansion joint systems.
Endurance:• 1, 2, 3 and 4 Hour Ratings Available
Maximum Openings:• Up to 48"
Performance Standards:• UL 2079-Class I, II and III• ASTM E-119• ASTM E-1966• ASTM E-1399
Code Compliance:• UBC, SBC, BOCA, IBC, CAN-S101, ICC-ES
Testing / Listing Agencies:• Intertek Laboratories (Includes Omega Point Lab)
• Underwriters Laboratories
Tested Performance Criteria:• Preconditioned cycle testing up to 5000 cycles for seismic movement
• Superimposed loading including hose stream
• Positive pressure• Factory and field splices/transitions• Air leakage/smoke migration• Seismic lateral shear• Coverless applications
Availability:• For hourly ratings and movement ranges, contact MM Systems.
Pyro-Flex Fire Barriers compatiblewith all MM Expansion JointSystems
PF Series - Floor Fire Barrier• Thermal, Seismic and Shear Movement Designs Available
• Caulkless Design• Foil and Refractory Matrix
.
.
.
Pyro-Flex / Single Side WallCoverless wall fire barrier system that maintains a seal to prevent smokeand fire spread when used for chase conditions, elevator shafts orother areas with access from only one side.
Pyro-Flex /Underslab Floor SeriesThe industries’ first fully rated floor fire barrier that can be installed from the underside of the concrete floor that allows and does not interfere with waterproofing expansion joint systems installed on the topside.
Pyro-Flex / Dual Side WallHigh performance continuous wall fire barrier system that maintains a seal toprevent smoke and fire spread on either side of the wall when used with anywall expansion joint system.
PF Series - Wall Fire Barrier / Single side • Foil and Refractory Matrix• Caulkless Design• Accommodates Smoke and Cycle Codes
.PF Series - Wall Fire Barrier / Dual side • Foil and Refractory Matrix• Caulkless Design• Accommodates Smoke and Cycle Codes
.Mounting Retainer UPF Series - Floor Fire Barrier
• Thermal, Seismic and Shear Movement Designs Available
• Caulkless Design• Foil and Refractory Matrix
.
NOTE: Underslab Fire Barrier System can be used with any expansion joint system.Minimum slab thicknesses required. Contact MM Systems for details.
MM Fire Barriers / Life Safety Systems
www.mm-usa.com 800.241.3460 25
Important ConsiderationsWhen Specifying & SelectingFire-Rated Joints…
1 Movement Criteria Fire Barriers must accommodate the same types and amount of movement that the associated ExpansionJoint Systems are designed for. Movement types include thermal, wind, multi-directional shear and seismic.Movement Ranges are typically plus or minus 50% of nominal for thermal movement and up to plus orminus 100% for seismic applications.
2 Ratings Requirements Fire Barrier endurance ratings are specified in hourly increments of one to four hours. Fire-Rated assembliesare a combination of Fire Barrier, Expansion Joint Covers and adjacent construction.
3 Code Compliance National and local building codes have changed substantially in recent years. Rated designs must includethe surrounding substrate materials. Once an isolated code requirement,Fire-Rated Barriers for MovementJoints are now commonplace in project specifications. MM has been a participant in the code developmentprocess for more than 25 years. We can help clarify the requirements for your specific project.
4 Testing / Listing Credentials Code compliant Fire Barriers must meet or exceed national or international standards established bylaboratories such as Intertek ETL SEMKO, or Underwriter's Laboratories. Fire Barriers should carry a listinglabel, indicating adherence to the stringent standards set forth by an accredited agency.
5 Liability Risk Fire Barriers are a life-safety component of the structure. Accepting anything less than a single source suppliermay increase your liability risk. You should select products that meet code and are independently tested tothe highest standards. Call (800) 241-3460 for a no-nonsense perspective on how to avoid the liability risk.
Important ConsiderationsWhen Specifying & SelectingFire-Rated Joints…
1960 was the year that Julian Attaway, the founder of MM Systems, dreamed of owning a manufacturingfacility with a national and international sales presence and, of course, quality products and services that metthe needs of an increasingly sophisticated construction market. Armed with this vision and a convictionthat a business that treated its customers by the Golden Rule would surely prosper.
Times have changed since 1960, and now more than ever, companies need to join together to help protectour environment for future generations to come. So in the spirit of Julian's adoption of the Golden Rule,current President Mike Attaway has committed to expanding it to a complementary standard - the GreenRule - treat the environment the way we would like to leave it for the next generation and generations to come.
To accomplish this MM Systems has committed to fostering environmentally friendly green manufacturingpractices to help meet present needs for sustainable construction products without compromising the abilityof future generations to meet their needs.
As a start, we built a new manufacturing facility in 2001 and set aside a portion of our campus for aconservation area.
To remain on the cutting edge, MM Systems joined the US Green Building Council and other Eco-FriendlyOrganizations to partner with professionals and companies who are committed to the protection of theenvironment through the development and promotion of sustainable products and green building practice.
See our "Build Green" section of the website to learn more about Real World Practices and additionaldetails.
Our Build Green Commitment
Our 5+ decades of creativity and solutions-oriented approach has earned MM Systems the trust of the architecturaldesign and contracting communities. Now that same commitment to excellence and value is available in our Sombrasdecorative panel systems. Sombras decorative panels allow designers to use an infinite palette of pattern, materials,colors and shadows to create nuanced subtleties or dramatic statements for any decorative panel application.
INTRODUCING SOMBRAS BY MM SYSTEMS
SOMBRAS SHADEBelow indoor lighting, Sombras decorative ceiling panels create interesting patterns on surfaces below while hiding fixtures and ceiling construction above. Outside, Sombras panelsnot only provide shade, but also create constantly evolving shadows and textures on everysurface below.
SOMBRAS PARTITIONSSombras decorative wall panels add artistic expression to any vertical surface. As a primarydesign element or as a standalone accent panel, the combinations of materials, patterns, colorand shadows are limited by only the designer’s imagination.
Decorative Panel Systems
SOMBRAS RAILINGSSombras decorative railing panels meet all applicable life-safety codes while allowing fullfreedom of design expression. First, choose from patterns that meet local code requirementsor, design your own. Then choose a color, any color and transform ordinary railing into theextraordinary. Sombras designers are waiting to help.
SOMBRAS DOORSSombras decorative door panels can be used as a dramatic element over glass or as a stand-alone inset in door framing. Pattern becomes the designer’s tool in creating a signaturelook at entry and moveable partitioning doors. Adding any color imaginable adds yet anotherdimensionality to your creation.
SOMBRAS SPANDRELSSombras decorative spandrel panels can camouflage or compliment any exterior surface. Color,shadows, patterns and scale make bold expressions or add subtle accents that will separateyour structure from the malaise of sameness. Sombras designers will collaborate with you todesign codecompliant support framing.
Sombras Panels | Division of MM Systemswww.sombraspanels.com | 800.241.3460
Certified Representative
Expansion Joints / ArchitecturalAesthetics, innovation and durability are the hallmark of MM’s line of floor, wall, ceiling and roof joint cover systems. Engineered systems include features thatare ADA compliant, fire-rated, no-bump and heavy-load designs capable of thermal, shear, seismic and wind-sway movement.
Expansion Joints / Parking and StadiumsHigh performance joint sealing systems designed to meet the rigorous demands of parking structures, stadiums and other open-air structures. Engineered optionsinclude systems that are waterproof, fire-rated, ADA compliant, and capable of thermal, shear and seismic movement.
Expansion Joints / SeismicEngineered especially for new and retrofit base-isolated structures, seismically designed, code-compliant systems provide fire-rated passage between structuresbefore, during and after seismic events. Engineered features include multi-directional movement capability including rotation in Z axis (vertical shear). Servicesinclude design/build and design assist.
Expansion Joints / Fire Rated / SafetyFire barrier systems engineered and tested to current standards and code requirements. Ratings include 2, 3 and 4-hour endurance. Seismic fire barriersaccommodate multi-directional movement including longitudinal sheer. Vertical and horizontal systems include chase and plenum designs. Factory approvedtransitions insure continuity of rating throughout the structure.
Architectural MetalworkEngineered and fabricated to exacting tolerances, architectural metalwork by MM is available in a variety of materials and finishes. Column covers, beam wraps,light coves, sun screens or your unique designs become signature elements of your project. Choose from unlimited Kynar 500® / Hylar 5000® color coatings.
Trench Grating and Access CoversADA compliant grating and trench cover systems. Decorative gratings offer an architectural alternative to traditional cast-iron gratings and are ideal for pooland plaza decks, green spaces and fountain surrounds. Removable access covers allow access to in-floor electrical and refrigeration services. Optional trenchliners available.
07 95 00
07 95 00
07 95 00
07 95 00
05 58 00
05 53 00
MM Systems Product Line
MEMBER
MM Systems reserves the right to amend or withdraw any product, design or information without notice and shall not be responsible or liable for any inaccuracy or ambiguity of any information contained herein.
50 MM Way • P.O. Box 98 • Pendergrass, GA 30567Call Toll Free 800-241-3460Web Site www.mm-usa.com
© 2018 - 08/18