area based adp user guide
TRANSCRIPT
-
8/13/2019 Area Based ADP User Guide
1/30
Area Based ADP
User Guide
-
8/13/2019 Area Based ADP User Guide
2/30
Disclaimer
Information of a technical nature, and particulars of the product and its use, is given by AVEVA
Solutions Ltd and its subsidiaries without warranty. AVEVA Solutions Ltd and its subsidiaries disclaim
any and all warranties and conditions, expressed or implied, to the fullest extent permitted by law.
Neither the author nor AVEVA Solutions Ltd, or any of its subsidiaries, shall be liable to any person or
entity for any actions, claims, loss or damage arising from the use or possession of any information,
particulars, or errors in this publication, or any incorrect use of the product, whatsoever.
Copyright
Copyright and all other intellectual property rights in this manual and the associated software, and every
part of it (including source code, object code, any data contained in it, the manual and any other
documentation supplied with it) belongs to AVEVA Solutions Ltd or its subsidiaries.
All other rights are reserved to AVEVA Solutions Ltd and its subsidiaries. The information contained in
this document is commercially sensitive, and shall not be copied, reproduced, stored in a retrievalsystem, or transmitted without the prior written permission of AVEVA Solutions Ltd. Where such
permission is granted, it expressly requires that this Disclaimer and Copyright notice is prominently
displayed at the beginning of every copy that is made.
The manual and associated documentation may not be adapted, reproduced, or copied, in any material
or electronic form, without the prior written permission of AVEVA Solutions Ltd. The user may also not
reverse engineer, decompile, copy, or adapt the associated software. Neither the whole, nor part of the
product described in this publication may be incorporated into any third-party software, product,
machine, or system without the prior written permission of AVEVA Solutions Ltd, save as permitted by
law. Any such unauthorised action is strictly prohibited, and may give rise to civil liabilities and criminal
prosecution.
The AVEVA products described in this guide are to be installed and operated strictly in accordance withthe terms and conditions of the respective license agreements, and in accordance with the relevant
User Documentation. Unauthorised or unlicensed use of the product is strictly prohibited.
First published September 2007
AVEVA Solutions Ltd, and its subsidiaries
AVEVA Solutions Ltd, High Cross, Madingley Road, Cambridge, CB3 0HB, United Kingdom
Trademarks
AVEVA and Tribon are registered trademarks of AVEVA Solutions Ltd or its subsidiaries. Unauthorised
use of the AVEVA or Tribon trademarks is strictly forbidden.
AVEVA product names are trademarks or registered trademarks of AVEVA Solutions Ltd or its
subsidiaries, registered in the UK, Europe and other countries (worldwide).
The copyright, trade mark rights, or other intellectual property rights in any other product, its name or
logo belongs to its respective owner.
AVEVA Solut ions Ltd
-
8/13/2019 Area Based ADP User Guide
3/30
Area Based ADP User Guide
Contents Page
12.0i
Area Based ADP User Guide
Contents
User Guide
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1
Using Area Based ADP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:1
Start the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:1
ABA Defaul ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:1ABA Drawing Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:2
Main Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:3
New Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:7
Existing Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:11
Drawing Registry Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:14
Process Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:15
Start Processing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:18
Variant Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:19
-
8/13/2019 Area Based ADP User Guide
4/30
12.0ii
Area Based ADP User Guide
Contents
-
8/13/2019 Area Based ADP User Guide
5/30
Area Based ADP User Guide
Introduction
12.01:1
1 Introduction
Area Based ADP (Automatic Drawing Production) can be used as an extension to the
DRAFT module of either AVEVA Plant or AVEVA Marine - henceforth known as the base
product in this document.
Area Based ADP (henceforth known as the ABA in this document) does not work with the
Hull Drafting Module of AVEVA Marine.
ABA drawings are compiled by selecting predefined areas and templates created by the
ABA administrator. An area is a physical box volume within the database defined by
coordinates, and a template is a drawing layout with set parameters describing a number of
views, graphical representation in the views, and types of labelling.
The purpose of this document is to provide the ABA user with guidance on how to work with
the application to produce drawings from the 3D model. A pre-requisite to using ABA is that
the ABA administrator has installed and configured ABA for use with the base product. TheABA Installation Guide and the ABA Administrator Guide documents give information on
these activities.
ABA allows a user to produce drawings by selecting predefined physical box volumes(known as areas), and matching them to a template that describes the format of the drawing
to be produced. A typical example of the work process by an ABA user is updating the
drawings after a change has been made to the design model for a maintenance project. The
user enters the DRAFT module, starts ABA, selects the area and reproduces all the
drawings generated for that area, running the process overnight.
This guide takes the ABA user through all the steps needed to produce new and existing
drawings, in a logical order. However, the information has been compiled in a format that
should allow a user to reference a particular aspect of ABA to gain specific information.
-
8/13/2019 Area Based ADP User Guide
6/30
12.01:2
Area Based ADP User Guide
Introduction
-
8/13/2019 Area Based ADP User Guide
7/30
Area Based ADP User Guide
Using Area Based ADP
12.02:1
2 Using Area Based ADP
The only functionality a normal Drafting user has within the ABA application is the ability to
create drawings using the administrative elements previously defined by a Drafting
administrator. If any of the application components covered in this user guide do not exist,
consult your ABA administrator.
2.1 Start the Application
To begin creating one or more ABA drawings select Draft>Auto Drawing Production from
the main menu.
This displays the ADP main menu bar containing the Area Based ADP menu selections,
Area Based ADP Defau ltsin the Settingsmenu andArea ADP Drawingsin the Create
menu.
2.2 ABA Defaults
If your project has been organised in such a way that different disciplines have different ABA
libraries, you will probably need to select a different Defaults file to that initially loaded. To do
this, select Settings>Area Based ADP Defaultsfrom the main menu, then enter the name
of the defaults file into the Defaults File text box and click the Loadbutton. The values held
in the defaults file appear on the form.
As you loaded this new defaults file its name was stored. When you re-enter the ABA
application at the next session, this defaults file will be the one opened initially.
-
8/13/2019 Area Based ADP User Guide
8/30
12.02:2
Area Based ADP User Guide
Using Area Based ADP
2.3 ABA Drawing Process
To start the ABA drawing process select Create>Area ADP Drawingsfrom the main menu.
The Process Drawings Controlform is displayed allowing you to begin creating drawings.
-
8/13/2019 Area Based ADP User Guide
9/30
Area Based ADP User Guide
Using Area Based ADP
12.02:3
The key activities you can perform in this form are:
Select combinations of areas and templates to define New Drawings.
Select Existing Drawingsto be updated or regenerated.
Select or define a Drawing Registry Areato store the drawings.
Add the required Process Settingsto the drawings.
Start Processingdrawings (either immediately or as a batch process).
2.3.1 Main Menu Options
The main menu options are:
-
8/13/2019 Area Based ADP User Guide
10/30
12.02:4
Area Based ADP User Guide
Using Area Based ADP
File Browser Form
The File Browser form is used to navigate to the required directory (the default is
%PDMSABALOG%), and then select the required file.
File>Load Log File Displays the File Browser Form.
File>Close Closes the Process Drawings Controlform.
Setting>General Defaults Displays theABA Defaul tsform.
Browse>Existing Drawings Displays the ABA Browse Sheets Form which allows
you to view ABA drawings that have already been
created. Closing the browser returns you to the Process
Drawings Controlform.
Browse>Stored LogFiles Displays the File Browser Form.
Browse>Show Version Displays the currently installed version of ABA.
-
8/13/2019 Area Based ADP User Guide
11/30
Area Based ADP User Guide
Using Area Based ADP
12.02:5
In the Current Directorypart of the form click theHome Directorybutton accessesthe directory from which you entered the base product.
In the Sub Directoriespart of the form, click on the ..to traverse folders. Click on adirectory in the list to access its contents.
The Filespart of the form shows the logfiles that exist in the chosen directory.
Select the Loadradio button to load the contents of the logfile into the selection fieldsof the Process Drawings Control form i.e. areas and templates, thus allowing you to re-
create a previous process run.
Select the Editradio button to display a default editor.
Select the Deleteradio button to delete a logfile.
-
8/13/2019 Area Based ADP User Guide
12/30
12.02:6
Area Based ADP User Guide
Using Area Based ADP
ABA Browse Sheets Form
To view a drawing, select it from the list or use the keyboard up and down arrow keys to
cycle through the list.
The top menu bar of theABA Browse Sheetsform has these options:
File>Re-Load Refreshes the list of available ABA drawings.
File>Close Closes the form.
Browse>Stored LogFiles displays a form to read any stored logfile.
-
8/13/2019 Area Based ADP User Guide
13/30
Area Based ADP User Guide
Using Area Based ADP
12.02:7
Right-click in the Browse sheets form to display these options:
2.3.2 New Drawings
This section describes the New Drawingspart of the Process Drawings Controlform
To select new drawings click on the Selectbutton. This displays the ABA New Drawing
Listform.
Modify Template View(s) Displays the ABA Template View form and accesses the
views available under the sheet template from which thepicked drawing was derived.
Modify Template Sheet Displays the ABA Template Sheet form and accesses
the sheet template from which the picked drawing was
derived.
Modify Template Drawing Displays the ABA Template Drawing form and accesses
the drawing template from which the picked drawing
was derived.
-
8/13/2019 Area Based ADP User Guide
14/30
12.02:8
Area Based ADP User Guide
Using Area Based ADP
.
You can select drawings for specific areas and templates with this form.
To do this click on the required combination from the lists shown or use the right mouse
button options described below. These right mouse button functions are available in bothlists:
Select A ll- selects all templates or areas within each list.
Clear Selection- clears all selected templates or areas from each list.
ABA areas are defined by the ABA Drafting Administrator (refer to Area Based ADP
Administrator Guide).
Add Selection to List - includes the combination of templates and areas selected intothe Process Drawings Control form.
Replace List with Selection - replaces any existing templates and areas in theProcess Drawings Control form with the current selections.
-
8/13/2019 Area Based ADP User Guide
15/30
Area Based ADP User Guide
Using Area Based ADP
12.02:9
Click the Drawing Namesbutton to select the drawing naming method.
By default drawing names are formed as a combination of the template and area names
separated by a hyphen. For example:
/ABATEMPLATE1-ARE101
Select the Taskoption to activate the Modify Taskbutton and allow a task to be selected
from the list.
Clicking Modify Taskwill display the /SETDRAWINGNAME form. The user can set a prefix
for the drawings about to be created. Click OKto close the form.
-
8/13/2019 Area Based ADP User Guide
16/30
12.02:10
Area Based ADP User Guide
Using Area Based ADP
To close the Drawing Namesform click Dismiss .
An alternative numbering option is the Auto Number ingoption on the Process Drawings
Control form. This uses base product naming rules and applies drawing numbers (setup by
the ABA administrator) as a process task.
Once the required selection is made, click OKto populate the New Drawings list window of
the Process Drawings Control form.
Any conflict with auto naming results in the default name being used.
Within the New Drawings list window of the Process Drawings Controlform the following
right mouse options are available to further refine the selection:
Select A ll- selects all templates or areas within each list.
Clear Selection- clears all templates or areas selected from each list.
Rename - allows the option to change the name by displaying the Rename Drawingform:
Remove Al l- removes all combinations within the drawing list.
Remove Selection- removes all selected drawings.
Sort By- allows the user to sort the field by the following attributes:
Drawing No.
Template Name
Template Description
Area Name
Area Description
Example - Selecting Templates and Areas for a New Drawing
Add the following combinations to the Process Drawings Control form:
-
8/13/2019 Area Based ADP User Guide
17/30
Area Based ADP User Guide
Using Area Based ADP
12.02:11
Testing template 1 with areas STAB-A and STAB-D
Testing template 2 with areas STAB-A, STAB-B, STAB-C and STAB-D
To do this:
1. Click on Testing template 1 and Areas STAB-A and STAB-D in the ABA New DrawingList form.
2. Right-click and select theAdd Selec tion to List option. The selection is added to theProcess Drawings Control form.
To clear the selections right-click in both the Drawing Templates and Design Areaswindows and choose the Clear Selectionoption.
3. Select Testing template 2 and use the right-click Select Alloption to select the fourareas.
4. Click OKand the second selection is added to the list.
Should Template & Area combinations already exist, the Existing Drawingspanel will be
populated along with the New Drawingspanel.
2.3.3 Existing Drawings
This section describes the Existing Drawingspart of the Process Drawings Controlform.
To add existing drawings to the Process Drawings Controlform for updating, regenerating
or renumbering use one of these methods:
Use the Selectbutton to pick from theABA Drawing List form as follows.
-
8/13/2019 Area Based ADP User Guide
18/30
12.02:12
Area Based ADP User Guide
Using Area Based ADP
Select the existing drawings to process by clicking relevant entries in the list. Make
multiple selections by hold Shiftor CTLRon the keyboard.
Click OKto close the ABA Drawing List form. Navigate to the current element and use theAddbutton with the CE drop-down option
selected.
Generate a list, or use an existing list, and use theAddbutton with the Current Listdrop-down option selected.
Example - Collect all DRWG Elements
1. In the members list select the DEPT or REGI where the drawings reside.
2. Select Utilities>Listsfrom the main menu which displays the Lists/Collections form.
-
8/13/2019 Area Based ADP User Guide
19/30
Area Based ADP User Guide
Using Area Based ADP
12.02:13
3. SelectAdd>L is tto create a new list.
4. Enter the description DRAWINGand click the OKbutton.
5. SelectAdd>Select ionwhich displays theAdd to L is tform.
-
8/13/2019 Area Based ADP User Guide
20/30
12.02:14
Area Based ADP User Guide
Using Area Based ADP
6. Complete the form by entering the element to be searched, element type DRWG, in theSelectionfield, the qualifier SPPURP EQ ABAT in the with Rule field, and CE in thefor Elementfield.
7. Click the Apply button and the drawings found are added to the list in the List/Collection form.
8. Select the Current Listoption from the drop-down list to the right of theAddbutton onthe Process Drawing Control form and then press the Add button. The list ofdrawings is added to the Existing Drawings list.
2.3.4 Drawing Regist ry Area
This section describes the Drawing Registry Areapart of the Process Drawings Control
form.
-
8/13/2019 Area Based ADP User Guide
21/30
Area Based ADP User Guide
Using Area Based ADP
12.02:15
To help document management, each 'process run' can place the created or modified
drawings in a specific registry (REGI) in the base product DRAFT database. The storage
area is defined by selecting an existing registry or by creating one automatically.
Create One Automatically- automatically creates the registry. The user enters a registry
name in the active field.
Use Existing Registryand Select - displays the Registry Listform and allows the user to
select the location for the drawings.
Note: Company naming conventions will probably be applied to these registries, contact
your ABA Administrator for information on these.
Restrict the displayed list to fewer entries by checking the filter switch and entering a
character string of any length. Any entry that contains the entered characters is removed
from the display.
If the filter is unchecked then all available registries are displayed.
2.3.5 Process Settings
This section describes the Process Settingspart of the Process Drawings Controlform.
-
8/13/2019 Area Based ADP User Guide
22/30
12.02:16
Area Based ADP User Guide
Using Area Based ADP
Process Tasks
Tasks which act on the entire 'run', can be added to the drawing process. Access these
tasks by clicking the Process Tasksbutton.
Note: If there are no tasks selected this is indicated in Red. If tasks are selected this will be
indicated in green.
The available tasks are shown in the Process Drawings Control Tasksform.
To add tasks, select the one required and click on the button. Remove tasks by clicking
the button.
Once all the required tasks have been selected click Dismiss.
Some of the tasks can be modified by first selecting them in the Tasks Selectedfield and
then clicking on the Modify Taskbutton. This displays a form that allows modification of that
specific task.
-
8/13/2019 Area Based ADP User Guide
23/30
Area Based ADP User Guide
Using Area Based ADP
12.02:17
Example - Modifying the Plot Task ()
Enter the value for the relevant field and press the OKbutton.
Note: If additional tasks are needed contact your administrator and ask for the appropriate
ones to be added.
Process Type
This section describes the Process Typepart of the Process Drawings Controlform.
Another option associated with the process run is the Process Type. This defines how ABA
handles the drawings, i.e. by updating, regenerating, and/or auto numbering them.
To define the type of process to be used, choose one of the options from the Process Type
pull down menu. The choices depend on the drawings selected for processing. For example
if only existing drawings are selected the create options are not displayed. The available
Process Type choices are:
Create & Update - New drawings are created and existing drawings are updated.
Update means that the design graphics, the tagging, and any tasks assigned to thetemplate are re-run. No layers are deleted through this process, thus allowing user toadd their own 2D layer elements if required.
Create & Regen(erate) - New drawings are created and existing drawings areRegenerated. Regenerate means that the drawing is effectively deleted and re-created.This maybe used if a new drawing is required without the user additions (for example2D layers).
Process Tasks Only - Only those selected process tasks are actioned. Drawings arenot modified. For example, if the process task Plot_Drawings is selected, then theselected existing drawings will be plotted to file.
Note: Create or Update and Regenerate options may also be available if one type of either
old or new drawings is to be processed.
-
8/13/2019 Area Based ADP User Guide
24/30
12.02:18
Area Based ADP User Guide
Using Area Based ADP
Au to Number ing
The other process option is theAu to Number ingtoggle. This assigns a specific numbering
code to the drawings to generate a Drawing number. The ABA Administrator sets up the
Drawing number, and you should refer to this person for details on how the numbering is
configured.
The final step in the drawing production is to process the drawings as described in the next
two sections. The options are process immediately and batch process.
2.3.6 Start Processing
Process Now
To process the drawings immediately, click the OK button. A Process Status form is
displayed showing the user the current process. This form allows the user to stop the
process by pressing the Cancelbutton.
Note: If the Cancel button is pressed processing will be interrupted and stop after the
current transaction has been completed.
Once all processes have been completed the Browse form appears highlighting the last
drawing created which also appears in the main view of Draft. The user can then view each
sheet by clicking on it in the browser list or by using the keyboard up and down arrow keys
A logfile is created for each process run that gives information about areas and templates
used, date and time of the process, and any run time warnings or errors. The location of the
logfile is specified in the Defaults form.
Batch Process
If you tick the Batch Process check box and then press the OKbutton, a Write a Batch
Macroform appears allowing you to specify the directory for the files to be located.
The default file location for batch processing is %PDMSABABATCH% (as defined in the
defaults and is settable using the option Settings>Area Based ADP Defaults). Use the
Browsebutton to navigation to all other directories.
This form gives details about the files to be created. To continue with the process click the
Write Batch Filebutton.
-
8/13/2019 Area Based ADP User Guide
25/30
Area Based ADP User Guide
Using Area Based ADP
12.02:19
Once complete, a form informing the user where the logfile has been written will appear.
The files created by the batch process are:
Name.bat - this file, when run from a DOS shell or by double-clicking in Explorer, startsup a non-graphical session of the base product and performs the drawing creationprocess. However, in normal circumstances the batch file is scheduled to run at a latertime.
Name.mac - this macro is used by the above batch file to enter Draft and perform the
processing task.
Scheduling Batch Processing
Use any scheduling software package. In Windows the utility is called Scheduled Tasks and
can be accessed from the Windows Control Panel. Open your choice of scheduler and
locate the batch file to process. Set up the required date and time in your scheduler.
2.3.7 Var iant Templates
ABA has been designed to deal with sets of drawings produced from a template, which then
need a few minor variations from the original template. For example, a template for
producing piping general arrangement may be satisfactory for 95% of drawings, but needs
an additional isometric view to clarify some details on the remaining 5%. This is treated as avariant of the original rather than a new template.
The original template is known as the master and the template with minor changes is
known as the variant. There can be only one master but several variants.
The master/variant process works as follows:
New drawings always use the master template.
Variants can only be selected from the existing drawing list on the Process Drawingsform.
The M or V1, V2 annotations indicate whether a drawing uses the master or varianttemplate, in the list of selected drawings.
It is not possible to make a variant revert to a master in the application.
-
8/13/2019 Area Based ADP User Guide
26/30
12.02:20
Area Based ADP User Guide
Using Area Based ADP
Use of Variants
The Modify Variant button option on the Process Drawing Controlform allows you to use
a variant of the master template.
To use a template variant:
1. Select the drawings to alter and click on the Modify Variantbutton. The Modify SheetVariantform is displayed.
If multiple drawingshave been selected, switch between them by using the pull-downmenu. Any variants associated with the drawing are shown in the Template Variantsfield.
2. Click on the required template.
Note: If a variant template variant is selected that is already in use the following error will
be displayed.
3. Click on theApplybutton once all modifications have been made.
Notice that the entry in the Existing Drawings List now reflects the choice of variantsheet.
Once the drawing selection process has been carried out the Process Drawing Control
form should look something like the one shown in.
-
8/13/2019 Area Based ADP User Guide
27/30
Area Based ADP User Guide
Using Area Based ADP
12.02:21
Having made the required selections, the next stage of the ABA process involves:
Defining the storage area for the drawings.
Choosing the process tasks and process type to be performed on the drawings.
Choose the method used to process the drawings.
-
8/13/2019 Area Based ADP User Guide
28/30
12.02:22
Area Based ADP User Guide
Using Area Based ADP
-
8/13/2019 Area Based ADP User Guide
29/30
Index
12.0Index page 1
Area Based ADP User Guide
A
Area Based ADP
defaults . . . . . . . . . . . . . . . . . . . . . . . 2:1drawing process . . . . . . . . . . . . . . . . 2:2start application . . . . . . . . . . . . . . . . 2:1using . . . . . . . . . . . . . . . . . . . . . . . . . 2:1
Auto Numbering . . . . . . . . . . . . . . . . . . 2:18B
Batch Processing
scheduling . . . . . . . . . . . . . . . . . . . 2:19D
Drawing
create . . . . . . . . . . . . . . . . . . . . . . . . 2:2existing . . . . . . . . . . . . . . . . . . . . . . 2:11new . . . . . . . . . . . . . . . . . . . . . . . . . . 2:7Registry . . . . . . . . . . . . . . . . . . . . . 2:14
F
Form
/SETDRAWINGNAME . . . . . . . . . . . 2:9ABA Browse Sheets . . . . . . . . . . . . . 2:6Add to List . . . . . . . . . . . . . . . . . . . 2:13Create List . . . . . . . . . . . . . . . . . . . 2:13Drawing List . . . . . . . . . . . . . . . . . . 2:11Drawing Names . . . . . . . . . . . . . . . . 2:9File Browser . . . . . . . . . . . . . . . . . . . 2:4List/Collections . . . . . . . . . . . . . . . . 2:12Modify Sheet Variant . . . . . . . . . . . 2:20New Drawing List . . . . . . . . . . . . . . . 2:7
Process Drawing Control . . . . . . . . . 2:2Process Drawings Control Tasks. . 2:16Registry List . . . . . . . . . . . . . . . . . . 2:15Rename Drawing . . . . . . . . . . . . . . 2:10Write a Batch Macro . . . . . . . . . . . 2:18
P
Process
batch . . . . . . . . . . . . . . . . . . . . . . . 2:18schedule batch. . . . . . . . . . . . . . . . 2:19settings . . . . . . . . . . . . . . . . . . . . . 2:15start . . . . . . . . . . . . . . . . . . . . . . . . 2:18start now . . . . . . . . . . . . . . . . . . . . 2:18tasks . . . . . . . . . . . . . . . . . . . . . . . 2:16type . . . . . . . . . . . . . . . . . . . . . . . . 2:17
V
Variant
Templates . . . . . . . . . . . . . . . . . . . 2:19use . . . . . . . . . . . . . . . . . . . . . . . . . 2:20
-
8/13/2019 Area Based ADP User Guide
30/30
Area Based ADP User Guide