area lighting flood lighting landscape · pdf file hospitality selection guide out d oor o2...

Hospitality Selection Guidewww.acuitybrandslighting.com

ou

tDo

or

O2

Outdoor Lighting IntroductionArea Lighting Flood Lighting Landscape Lighting

Area LightingArea Lighting applications are typically unsheltered parking lots which require broad, uniform illumination of the space to provide safety and to assist with the location

of vehicles. Lithonia Lighting offers a variety of area lighting styles that range from Historical lighting in our Antique Street Lamps, to Contemporary and European styl-

ing. Our selection includes arms, poles wall brackets, luminaires and bollards - all with the assurance of high-quality products that meet your budget requirements.

Flood LightingFloodlighting consists of broad area lighting of buildings that washes the structure with uniform illumination. In addition, exterior accent lighting draws attention to

architectural elements, statues and design details. Lithonia Lighting offers a wide selection of general purpose and architectural floodlights suitable for any floodlight-

ing application. Whether your needs are for general area lighting, sign illumination, wall washing, facade lighting, or accentuating details, we have a fixture to meet

your application requirements. With a choice of optical distributions and a variety of accessories such as visors and louvers, Lithonia’s floodlights are unparalleled in the

industry.

Landscape LightingLandscape lighting is designed to enhance the environment by drawing attention to the landscape. This includes the illumination of trees, plants and other vegetation.

In addition to the vegetation and walkways of the landscape, we offer a variety of lighting for fountains and swimming pools.

{ Area Lighting O3 - O21

Flood Lighting O22 - O35

Landscape Lighting O36 - O39

Outdoor LighingLithonia Lighting outdoor products are unmatched in the

industry for distinctive designs, signature accents and

high-performance optical systems.

With a wide selection of luminaires, poles, mounting options and finishes, Lithonia Lighting is your best choice for every architectural and general purpose lighting

application.

Hospitality Selection Guide www.acuitybrandslighting.com

ou

tDo

or

O3

contents

architectural area lighting o4

Historical o8

contemporary o13

oslo series o16

Bollards o18

Area Lighting


ou

tDo

or

O4

Designation

High pressure sodium KSF1 70S KSF1 100S KSF1 150S KSF2 250S KSF2 400S KSF3 1000S

Metal halide KSF1 100M KSF1 150M1

KSF1 175M KSF1 200M2

KSF1 250M KSF2 320M2,3

KSF2 350M2,3

KSF2 400M1,3

KSF3 1000M1,4

Voltage

1202085

2405

2773474805

TB6

Intended Use

For car lots, street lighting or parking areas.

Features

Housing – Rugged, heavy-gauge, aluminum rec-tilinear housing. All seams continuously welded for weathertight integrity. Dark bronze corrosion-resistant polyester powder finish (DDB) standard. Other architectural colors available.

Door Frame – Natural anodized, extruded alumi-num frame with mitered corners, retained with two hinge pins and secured with one quarter-turn, quick-release fastener. Integrally designed, extruded silicone gasket provides weatherproof seal between housing and frame.

Lens – .125" thick, impact-resistant tempered glass with thermally applied, silk-screened power door shield.

Mounting – Extruded 4" (KSF1, KSF2) or 12" (KSF3) aluminum arm for square pole mount-ing shipped in fixture carton as standard. Optional mountings available.

Optics – Anodized segmented reflectors provide

NOTES:1 May be ordered with SCWA.2 Must be ordered with SCWA.3 Must use ED28 lamp.4 Must use BT37 lamp with R5S.5 Consult factory for availability in Canada.6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V,

347V; ships as 120V/347V.7 Use 9" arm when mounting two luminaires at 90°.8 Use 12" arm when mounting two luminaires at 90°.9 May be ordered as accessory.10 QRSTD available in select wattages. Consult factory. 11 Includes mounting arm.

KSFSpec-Form®

Mounting

Included, KSF1/KSF2 SP04 4" square pole arm (std.)7

SP09 9" square pole arm RP04 4" round pole arm7

RP09 9" round pole arm WB04 4" wall bracket WB09 9" wall bracketIncluded, KSF38

SP12 12" square pole arm (std.) RP12 12" round pole arm WW12 12" wood pole or wall WB12 12" wall bracketShipped separately9

KMA Mast arm adapter KTMB Twin mounting bar DA12P Degree arm (pole) DA12WB Degree arm (wall)

Options/accessories

Installed LPI Lamp included L/LP Less lamp SF Single fuse, 120V, 277V, 347V (n/a TB) DF Double fuse, 208V, 240V, 480V (n/a TB) PER NEMA twist-lock receptacle only (no photocontrol) QRS Quartz restrike system CR Enhanced corrosion resistance EC Emergency circuit SCWA Super CWA pulse start ballast (n/a HPS, 100M, 175M) CSA CSA Certified NOM NOM Certified (consult factory)Shipped separately PE1 NEMA twist-lock PE (120V-240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap for PER option KSF_HS House-side shield (KSF1/KSF2: R2 and R3 only. KSF3: R3

and R4 only) KSF_VG Vandal guard (KSF1/KSF2 only)

Dimensions are shown in inches (centimeters) unless otherwise noted. KSF1 KSF2 KSF3 EPA:11 1-1/2 ft2 (.14 m2) 2 ft2 (.19 m2) 3 ft2 (.28 m2) Length: 21-1/4 (54.0) 24-19/32 (64.4) 29-19/32 (75.2) Width: 15-15/32 (39.3) 17-25/32 (45.2) 23-19/32 (59.9) Height: 7-1/4 (18.4) 8-3/8 (21.1) 10-1/2 (26.7) Max. weight: 39 lbs (17.7 kg) 55 lbs (24.9 kg) 85 lbs (38.6 kg)

Distribution

R2 Type II roadway (sizes 1 and 2 only) R3 Type III asymmetric R4 Type IV forward throw (size 3 only) R4SC Type IV forward throw, sharp cutoff (sizes 1

and 2 only) R4W Type IV wide, forward throw (size 2 only) R5S Type V square (sizes 2 and 3 only)

superior uniformity and control. KSF1/KSF2 reflec-tors are rotatable and interchangeable. KSF3 Type IV is rotatable. Five cutoff distributions available: R2 (roadway), R3 (asymmetric), R4SC (forward throw, sharp cutoff), R4W (wide, forward throw), R5S (square).

Electrical – High reactance, high power factor for 150W and below. Constant wattage autotrans-former for 175W and above. Copper wound and 100% factory tested. Removable power door and positive-locking disconnect plugs.

Socket – Porcelain, horizontally oriented, mogul-base socket (100M and 150M are medium-base) with copper alloy, nickel-plated screw shell and center contact. UL Listed 1500W, 600V.

Listings

UL Listed (standard). CSA Certified or NOM Certi-fied (see Options). UL Listed for wet locations. IP65 rated.

Ordering Information Example: KsF1 150s r2 120 sP09 Per lPi

are

a l

iGH

tin

GArchitectural Arm-Mounted Cutoff


ou

tDo

or

O5

Intended Use

For streets, parking lots and surrounding areas.

Features

Housing – Cylindrically shaped, rugged, heavy-gauge, spun aluminum housing. Fully gasketed for weathertight integrity. Standard finish is dark bronze (DDB) polyester powder. Other architec-tural colors available. KVR2 standard door frame is natural aluminum (DNA). Door frame can be painted to match housing color (see DFP option below).

Lens – Impact-resistant, clear, 3/16" thick, tem-pered drop lens.

Mounting – Extruded-aluminum arm with integral splice compartment for wall or pole mounting is shipped in fixture carton. Optional mountings available.

Ordering Information Example: Kvr2 250s sYMDl 120 rPD06 sF lPi

Architectural Round Vertical

KVR

Dimensions are shown in inches (centimeters) unless otherwise noted. KVR2 (arm) KVR2 (post) EPA: 1.6 ft2 (.15m2) 1.7 ft2 (.16 m2) Diameter: 25 (63.5) 25 (63.5) Height: 17 (43.1) 23-7/8 (60.6) Max. weight: 56 lbs (25 kg) 60 lbs (27.0 kg)

Voltage

1202084

2404

277 3474804

TB5

Optics – KVR2 vertical-lamp reflectors are one piece spun and formed around anodized alu-minum. KVR2 horizontal-lamp hydroformed and segmented reflectors also available. KVR2 reflectors are rotatable and interchangeable. Electrical – Constant-wattage autotransformer, high-power factor ballast. Ballast is copper wound and 100% factory tested. Super CWA pulse start ballasts required for 320M and 350M (must order SCWA option).

Socket – Mogul-base porcelain socket with copper alloy, nickel-plated screw shell and center contact. UL Listed 1500W, 600V.

Listings

UL Listed (standard). CSA Certified (see Options). UL Listed for wet locations.

Designation

High pressure sodium KVR2 250S KVR2 400S

Metal halide KVR2 175M1

KVR2 200M2

KVR2 250M1

KVR2 320M2

KVR2 350M2

KVR2 400M1

Options/accessories

Installed LPI Lamp included L/LP Less lamp PER NEMA twist-lock receptacle only (photocontrol

not included) SF Single fuse, 120V, 277V, 347V (n/a TB) DF Double fuse, 208V, 240V, 480V (n/a TB) EC Emergency circuit (250W max., lamp not

included) HS House-side shield3

SCWA Super CWA pulse start ballast (n/a HPS)7

KW1 KiloWatch 120V control relay9

KW4 KiloWatch 277V control relay9

EHS External house-side shield8

EHSB External house-side shield black8

QRS Quartz restrike system QRSTD QRS time delay TLS Tool-less access DFP Door frame painted to match housing10

CR Enhanced corrosion resistance CSA CSA Certified NOM NOM Certified (consult factory)Shipped separately PE1 NEMA twist-lock PE (120V-240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap for PER option KVR2VG Vandal guard

Mounting

KVR2 arm mounting6

SPD04 4" Square pole arm RPD04 4" Round pole arm SPD06 6" Square pole arm RPD06 6" Round pole arm SPD09 9" Square pole arm RPD09 9" Round pole arm SPD12 12" Square pole arm RPD12 12" Round pole arm WBD12 12" Wall bracket KMA Mast arm (external fitter)KVR2 post-top mounting PT4 Post top, 4" OD open-top pole PT45 Post top, 4-1/2" OD open-top pole PT5 Post top, 5" OD open-top pole PT6 Post top, 6" OD open-top pole RPF20 Round pole fitter (2-3/8" OD tenon) RPF25 Round pole fitter (2-7/8" OD tenon) SPF20 Square pole fitter (2-3/8" OD tenon) SPF25 Square pole fitter (2-7/8" OD tenon)

Distribution

KVR2 vertical lamp distribution SYMDL Symmetric square, drop lens, semi-cutoff ASYDL Asymmetric, drop lens, semi-cutoff SYMFL Symmetric square, flat lens, full-cutoff ASYFL Asymmetric, flat lens, full-cutoff VFADL Vertical forward throw, automotive, drop lens, semi-cutoff VFAFL Vertical forward throw, automotive, flat lens, full-cutoffKVR2 horizontal lamp distribution R2DL Type II roadway, drop lens R3DL Type III asymmetric, drop lens R2FL Type II roadway, flat lens R3FL Type III asymmetric, flat lensKVR2 segmented reflector SR2FL Type II segmented, roadway, flat lens SR3FL Type III segmented, asymmetric, flat lens SR4SCFL Type IV segmented, forward throw, sharp cutoff, flat lens SR4WFL Type IV segmented, wide forward throw, flat lens

NOTES:1 May be ordered with SCWA.2 Must be ordered with SCWA.3 Available with R2, R3 only.4 Consult factory for availability in Canada.5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V,

347V; ships as 120v/347V.6 Must order SPD12 or RPD12 when two or more luminaires are oriented on a

90° drilling pattern.

Requires glass flat lens (GFL) option.

7 175M available in vertical lamp distributions only.8 May be ordered as an accessory.9 For specific ordering information, consult factory.10 Door frame is standard DNA (natural aluminum.)

area

liGH

tinG


ou

tDo

or

O6

Ordering Information Example: as1 150s sr2 120 sPa sF lPi

Options/accessories

Installed LPI Lamp included L/LP Less lamp SF Single fuse, 120V, 277V, 347V (n/a TB and MVOLT) DF Double fuse, 208V, 240V, 480V (n/a TB and MVOLT) PER NEMA twist-lock receptacle only (no photocontrol) QRS Quartz restrike system12

QRSTD QRS time delay12

CR Enhanced corrosion resistance HS House-side shield (n/a SR4SC or SR5S) EC Emergency circuit12

SCWA Super CWA pulse start ballast (n/a HPS, CFL, 50M, 70M, 100M or 175M)

CSA CSA Certified NOM NOM Certified13

ELDW Emergency battery pack (CFL only)14

Shipped separately PE1 NEMA twist-lock PE (120V, 208V, 240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap AS1VG Vandal guard AS2VG Vandal guard

Mounting11

Included SPA Square pole mounting block RPA Round pole mounting block WBA Wall bracket (up or down)Shipped separately ASKMA1 Mast arm adapter (size 1) ASKMA2 Mast arm adapter (size 2) DCAS1 Decorative curved arm, square pole

only (size 1) DCAS1R Decorative curved arm, round pole

only (size 1) DCAS2 Decorative curved arm, square pole

only (size 2) DCAS2R Decorative curved arm, round pole

only (size 2)

Intended Use

For streets, walkways, parking lots and surround-ing areas.

Features

Housing – Die-cast single-piece aluminum with nominal 1/8" wall thickness. Integral arm provides easy installation to pole or wall. Housing com-pletely sealed against moisture or environmental contaminants.

Door Assembly – Die-cast door frame, impact-resistant, tempered, glass lens, 3/16" thick, fully sealed with one-piece tubular silicone gasket.

Optics – Anodized segmented reflectors for su-perior uniformity and control. Reflectors attach with tool-less fasteners and are rotatable and in-terchangeable.

Installation – Heavy-duty easy-mount block at-taches to pole or wall to provide ease of installa-tion as well as ensured alignment and leveling.

Electrical – 150W and below utilize a high reac-tance, high power factor. 175W and above use a

Voltage

1202087

2407

2773474807

TB8

MVOLT9,10

NOTES:1 120V only.2 120V and 277V only.3 Not available with 480V.4 May be ordered with SCWA.5 Must be ordered with SCWA .6 Available in SR3 only.7 Consult factory for availability in Canada.8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada

120V, 277V, 347V; ships as 120V/347V.9 Compact fluorescent only, 120V-277V.10 Multi-volt electronic fluorescent ballast capable of operating on

any line voltage between 120V and 277V.11 Mounting block standard.12 Maximum allowance wattage lamp included.13 Consult factory for availability.14 Must specify voltage. 1 lamp 42TRT max. 2 lamp 2/32TRT.

Designation

High pressure sodium AS1 35S1

AS1 50S2

AS1 70S AS1 100S AS1 150S AS2 200S AS2 250S AS2 400S

Metal halide AS1 50M3

AS1 70M3

AS1 100M AS1 150M4

AS1 175M AS2 200M5

AS2 250M4

AS2 320M5

AS2 350M5

AS2 400M4

Compact fluorescent AS1 2/32TRT6

AS1 42TRT AS1 2/42TRT6

AS1 57TRT AS1 70TRT AS1 26DTT AS1 32TRT AS1 2/32TRT Dimensions are shown in inches (centimeters) unless otherwise noted.

AS1 AS2 EPA: 0.7 ft2 1.2 ft Length: 22-1/4 (54.5) 28-5/8 ( ) Width: 13 (31.7) 17 (41.9) Height: 6-1/4 (15.9) 8-1/4 (21.0) Weight: 22 lbs (10 kg) 45 lbs (20.4 kg)

Distribution

SR2 Segmented Type II roadway SR3 Segmented Type III asym-

metric SR4SC Segmented Type IV forward

throw, sharp cutoff SR4W Segmented Type IV wide,

forward throw (size 2 only) SR5S Segmented Type V square

Drilling Patterns:(See pole ordering, pg. 552)DM19AS 1 at 90°DM28AS 2 at 180°DM29AS 2 at 90°DM39AS 3 at 90°DM49AS 4 at 90°DM32AS 3 at 120° (round poles only)

H

L

constant-wattage autotransformer ballast. Com-pact fluorescent uses an electronic high frequen-cy ballast. Ballasts mounted on removable power tray with tool-less latch and have positive locking disconnect plugs. Ballasts are copper wound and 100% factory tested.

Finish – Standard finish is dark bronze (DDB) corrosion-resistant polyester powder finish. Other architectural colors available.

Socket – Porcelain, medium-base socket for AS1, mogul-base socket for AS2, with copper alloy nickel-plated screw shell and center contact. Fluo-rescent is four-pin positive latching thermoplastic. UL Listed.

Listings

UL Listed (standard). CSA Certified or NOM Certi-fied (see Options). UL Listed for wet locations in lens-down orientation (damp location listed in lens-up orientation). Meets IESNA full cutoff crite-ria. U.S. patent no. D447, 590. Canadian patent no. 94324. IP65 rated

Architectural Arm-Mounted Full Cutoff

ASAreaAeris™

are

a l

iGH

tin

G

May not meet with HS option.


ou

tDo

or

O7

area

liGH

tinG

Ordering Information Example: Mr1 150s sr2 120 sPa sF lPi

Options/accessories

Installed LPI Lamp included L/LP Less lamp SF Single fuse, 120V, 277V, 347V (n/a TB and MVOLT)12

DF Double fuse, 208V, 240V, 480V (n/a TB and MVOLT)12

PER NEMA twist-lock receptacle only (no photocontrol) QRS Quartz restrike system (100W max. AS1, 250W max. AS2,

lamp not included)12

CR Enhanced corrosion resistance HS House-side shield (n/a SR4SC or SR5S) EC Emergency circuit13

TP Tamperproof SCWA Super CWA pulse start ballast (n/a HPS, DTT, TRT, 50M,

70M 100M or 175M) CSA CSA Certified NOM NOM Certified13

Shipped separately PE1 NEMA twist-lock PE (120V, 208V, 240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap MR1VG Vandal guard MR2VG Vandal guard

Mounting11

Included (blank) for MRP SPA Square pole mounting block RPA Round pole mounting block

Intended Use

For streets, walkways, parking lots and surround-ing areas.

Features

Housing – Die-cast single-piece aluminum with nominal 1/8" wall thickness. Integral arm provides easy installation to pole. Housing completely sealed against moisture or environmental con-taminants.

Door Assembly – Die-cast door frame, impact-resistant, tempered, glass lens, 3/16" thick, fully sealed with one-piece tubular silicone gasket.

Optics – Anodized segmented reflectors for supe-rior uniformity and control. Reflectors attach with tool-less fasteners and are rotatable and inter-changeable.

Installation – Heavy-duty easy-mount block at-taches to pole to provide ease of installation as well as ensured alignment and leveling.

Electrical – 150W and below utilize a high reac-tance, high power factor. 175W and above use a

Voltage

1202087

2407

2773474807

TB8

MVOLT9,10

NOTES:1 120V only.2 120V and 277V only.3 Not available with 480V.4 May be ordered with SCWA.5 Must be ordered with SCWA .6 Available in SR3 only.7 Consult factory for availability in Canada.8 Optional multi-tap ballast (120V, 208V, 240V, 277V). In

Canada 120V, 277V, 347V; ships as 120V/347V.9 Compact fluorescent only, 120V-277V.10 Multi-volt electronic ballast (for TRT and DTT lamps) capable

of operating on any line voltage between 120V and 277V.11 Mounting block standard for arm mount. MRP mounts to

open top pole only.12 SF, DF or QRS options cannot be ordered together.13 Consult factory for availability.

Designation

High pressure sodium MR* 35S1

MR* 50S2

MR* 70S MR* 100S MR* 150S MR2 200S MR2 250S MR2 400S

Metal halide MR* 50M3

MR* 70M3

MR* 100M MR* 150M4

MR* 175M MR2 200M5

MR2 250M4

MR2 320M5

MR2 350M5

MR2 400M4

Compact fluorescent MR* 2/32TRT6

MR* 42TRT MR* 2/42TRT6

MR* 57TRT MR* 70TRT

Distribution

SR2 Segmented Type II roadway SR3 Segmented Type III asymmetric SR4SC Segmented Type IV forward

throw, sharp cutoff SR4W Segmented Type IV wide,

forward throw (MR2) SR5S Segmented Type V square only

Drilling Patterns:DM19AS 1 at 90°DM28AS 2 at 180°DM29AS 2 at 90°DM39AS 3 at 90°DM49AS 4 at 90°DM32AS 3 at 120° (round poles only)

constant-wattage autotransformer ballast. Com-pact fluorescent uses an electronic high frequency ballast. Ballasts mounted on removable power tray with tool-less latch and have positive locking disconnect plugs. Ballasts are copper wound and 100% factory tested.

Finish – Standard finish is dark bronze (DDB) corro-sion-resistant polyester powder finish. Other archi-tectural colors available.

Socket – Porcelain, medium-base socket for MR1or MRP, mogul-base socket for MR2, with copper alloy nickel-plated screw shell and center contact. Fluo-rescent is four-pin positive latching thermoplastic. UL Listed.

Listings

UL Listed (standard). CSA Certified or NOM Certified (see Options). UL Listed for wet locations in lens-down orientation (damp location listed in lens-up orientation). Meets IESNA full cutoff criteria.

Architectural Arm-Mounted Full Cutoff

MRArea

Omero™

May not meet with HS option.*Insert "1" for MR1, or "P" for MRP post top.

Dimensions are shown in inches unless otherwise noted. MR1 MRP MR2

EPA: .54 1.125 .92 Diameter: 18.6 18 25 Overall Height: 6.4 32 8.25 Weight: 27 lbs 33 lbs 46 lbs


ou

tDo

or

O8

Historical liGHtinG solutions

Chicago SeriesLighting Posts and

Bollard

Sussex SeriesLighting Post

Washington SeriesLighting Post and

Bollard

New York SeriesLighting Post and

Bollard

DS Series Luminaires with Cutoff Optics

LT Series Octagonal Luminaires

A Series Acorn Luminaires

AT Series Acorn Luminaire

ACA Series Arm

PCP Series Arm

ANTIQUE Street Lamps™, an Acuity Brands® Company, offers one of the largest collections of outdoor decorative lighting products. The vast product line developed over the last few decades includes luminaires, posts, crossarms, wall brackets, bollards, roadway and traffic signal posts, and signage. ANTIQUE Street Lamps historic and contemporary designs converge to unite the design elements for hospitality, park and recreation, streetscape, retail, high-end residential, municipal, and school and university settings.

· architectural outdoor lighting

· Historical and contemporary Designs

· extensive Product line

· custom capabilities

· vertically integrated Manufacturing

ou

tDo

or


ou

tDo

or

O9

conteMPorarYliGHtinG solutions

A sampling of ANTIQUE Street Lamps’ historical and contemporary lighting products is shown below and in the following pages. To see the complete product line please go to www.ANTIQUEStreetLamps.com.

Oslo SeriesLighting Post and Arm

Copenhagen Series Luminaire

Philadelphia Series Post

Munich Series Luminaire

with Cutoff Optics

Hanover Series Luminaires with Cutoff Optics

Contemporary Styled Post and Arms

Oslo Series Luminaire with

Cutoff Optics

EAE Series Arms

EAL Series Arm

Oslo SeriesBollard with Cutoff Optics

ou

tDo

or


ou

tDo

or

O10

His

tori

ca

l lu

Min

air

es Features

Construction – All luminaire bases and frames are manufactured from high-quality cast aluminum. Round domes are spun aluminum. Globes are formed from clear textured acrylic, clear refractive acrylic or white smooth acrylic. Hardware and fas-teners are stainless steel material. Standard exte-rior hardware is of a tamper-resistant design.

Installation – All luminaires are designed to slip fit a 3” O.D. x 3” tall tenon and attach with set screws.

Light Source – All luminaires are provided with a quick-disconnect HID assembly. The DS series luminaires utilize high performance cutoff reflec-tors with horizontal lamp and quick-disconnect in a type 5 distribution. All other luminaires are furnished with a vertical lamp and optional glass refractors in type III or type V distribution.

Ordering Information Example: a25 au 100M MeD act Gr5 tB1 Per Pe1 anBK

HistoricalLuminaires

NOTES:1 250M only available with AT23, A25, LT30 or LTS30 and bases A, AU and W.

Lamp not supplied with luminaires.2 Multi-tap ballast TB (120, 208, 240, 277V).3 Optional photocontrols only available with the AU luminaire base.4 Consult factory for availability in Canada.

Bases

EDAWAU

Wattage/lamp1

Metal Halide 70M MED 70W 100M MED 100W 175M MED 175W 250M MED 250WHigh Pressure Sodium 100S MED 100W 150S MED 150W

Distribution

All DS series only SR5S Reflector type V

All other luminaires(blank) Symmetrical distribution GR5 Glass refractor type V GR3 Glass refractor type III

Voltage2

TB1 120V TB24 208V TB3 240V TB4 277V 347 347V 480 480V

Options3

HS House side shield SF Single fusing DF Double fusingPER3 Twist and lock photocontrol

receptaclePE13 NEMA twist and lock PE 120,

208, 240VPE33 NEMA twist and lock PE 347VPE43 NEMA twist and lock PE 480VPE73 NEMA twist and lock PE 277V

Series

S18AT23A25LT30

LTS30

DS42

DS72

DS8

Lens material

S18 only AWS Acrylic white smoothDS4, DS7 &DS8 only ARF Acrylic refractiveAll other luminaires ACT Acrylic, clear textured

Finish

ANBK Black (std.) ANDB Dark bronze ANDG Dark green

Note: Luminaires below shown with the E series luminaire base. Replace E base with D, A, W or AU base for more luminaire choices.

S18 E18”w 25”h

AT23 E15”w 30”h

A25 E16”w 33.5”h

LT30 E15”w 36.5”h

LTS30 E21”W 36.5”H

DS8 E19”w 37”h

DS4 E16”w 38”h

DS7 E19”w 33”h

E8”h

D8”h

W13.5”h

AU3

14.5”h

OctagonalInternal Cutoff Optics

Luminaire Bases

Acorn GlobesSphere Globes

Finish – The luminaires are finished with a premi-um polyester powder coating. Standard colors are black, dark bronze or dark green. For finish speci-fications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Listings

UL Listed to US and Canadian safety standards. Luminaires are labeled as suitable for wet locations.

A11.5”h

ou

tDo

or


ou

tDo

or

O11

Histo

rica

l Posts

Ordering Information Example: PX W17 14 F5 3t3 anBK

Historical Posts

F4Fluted 4” shaft

F5Fluted 5” shaft

F5Fluted 5” shaft

9”sq 17”Ø 17”Ø

S9 Sussex W17 Washington NY17 New York

NOTES:1 S9 series posts only available with F4 shaft.

Family

PX

Series

S91

CH12W17NY17

Height

101214

Shaft

F41 Fluted 4” Ø F5 Fluted 5” Ø

Tenon Size

3T3 3” O.D. x 3” tall tenon 3T4 3” O.D. x 4” tall tenon 3T5 3” O.D. x 5” tall tenon

Features

Construction – The post base is manu-factured from high-quality cast alu-minum. The shafts are straight fluted extruded aluminum. All posts are fabricated as one-piece construction. The shafts are telescoped into the bases and double welded for maxi-mum structural integrity. An integral 3” O.D. x 3” tall tenon is provided for luminaire mounting or optional tenon heights for arm mounting. Hard-ware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.

Installation – Posts are provided with four, hot-dip galvanized, ¾” L-type anchor bolts. Anchor bolt circle diameters are, 14” for the Sussex, 7” for the Chicago and 12” for the Washington and New York. A door is provided in the base for anchorage and or wiring access. The Sussex post has a two-piece square, cast aluminum bolt cover.

Finish – The posts are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green. For finish speci-fications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Finish

ANBK Black ANDB Dark bronze ANDG Dark green

CH12 Chicago

12”Ø

F4Fluted 4” shaft

ou

tDo

or


ou

tDo

or

O12

Historical Arms & Wall Brackets

His

tori

ca

l a

rMs

an

D B

oll

arD

s

Historical Bollards

BLCA BW14DTLWashington

Unlighted

ACA30

Features

Construction – The arms and matching wall brackets are manufactured from high-quality cast aluminum. Hardware and fasteners are stainless steel material and of a tamper-resistant design. Arms ACA30 and ASC30 measure 30” between light centers and arm PCP36 measures 36” between light centers. Integral 3” O.D. x 3” tall tenons are provided for luminaire mounting.

Installation – Arms slip-fit a 3” O.D. post top tenon and attach with socket set screws. The ACA30 and PCP36 arms have 5” tall tenons and the ASC30 has a 4” tall tenon. Wall brackets have (4) .56” dia. holes for mounting.

Finish – The arms and wall brackets are finished with a premium polyester powder coating. Stan-dard colors are black, dark bronze or dark green. For finish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Ordering Information Example: aca30 anBK

NOTES:1 For finish specifications, see Antique Street Lamps

binder, Finish tab.

Finish1


Series

Arms ACA30 PCP36 ASC30 Wall Brackets ACAWB PCPWB ASCWB

PCP36

ASC30

Features

Construction – The bollards are one-piece con-struction. The base and top are high-quality cast aluminum. Fluted top section is extruded alumi-num. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tam-per-resistant design.

Installation – The bollards are provided with four 3/4” diameter L-type anchor bolts. Anchor bolt circle diameters are, 14” for the Sussex, 7” for the Chicago, 10.5” for the Washington and 12” for the New York. A door is provided in the base for

Ordering Information Example: Blca BnYDtl 100M MeD GWs tB1 anBK

Wattage/lamp1

Metal Halide 50M MED 50W 70M MED 70W 100M MED 100WHigh Pressure Sodium 50S MED 50W 70S MED 70W 100S MED 100W

Voltage1

TB1 120V TB22 208V TB3 240V TB4 277V 347 347V 480 480V

Series

LightedBLCA BCH12DTL BLCA BNY17DTLBLCA BW14DTLUnlightedBCA BCH12DT BCA BNY17DTBCA BW14DT

Lens material

GWS Glass white smooth

Finish


anchorage and or wiring access. The Sussex post has a two-piece square, cast aluminum bolt cov-er.

Light Source – The bollards are furnished with an HID ballast and socket assembly. The optical as-sembly is secured inside the shaft with openings in the flutes for illumination.

Finish – The bollards are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green. For finish speci-fications and color options, see ANTIQUE Street Lamps binder, Finish tab.

BLCA BNY17DTLNew York

BCA BW14DTWashington

BCA BNY17DTNew York

Lighted

NOTES:1 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).2 Consult factory for availability in Canada.

BCA BCH12DTChicago

BLCA BCH12DTLChicagoo

utD

oo

r


ou

tDo

or

O13

ContemporaryLuminaires

Ordering Information Example: eM25 400M MoG GcF sr2 tB1 anBK

Features

Construction – All luminaires ballast housings and skirts are constructed of high-quality cast alumi-num. Flat lens is manufactured of clear impact-resistant tempered glass.

Installation – Pendant luminaires are designed to mount to swivel adapters provided with contem-porary arms. Pole top luminaries are designed to slip-fit 3.375” dia. pole top tenon and attach with (8) socket style set screws.

Light source – All luminaires are provided with a quick-disconnect HID assembly. All but EC13 lu-minaires utilize high-performance cutoff reflectors with horizontal lamp and quick-disconnect in 4 or 5 full cutoff distribution.

Finish – The luminaires are finished with a pre-mium polyester powder coating. Standard colors are black, dark bronze, natural aluminum or white. For finish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

NOTES:1 Multi-tap ballast (120, 208, 240, 277V; 120, 277, 347V in Canada).2 Distribution SR4W is only available with EH22RT or EM22RT.3 Consult factory for availability in Canada.4 Available for SR2, SR3 and SR4W only.

Lens material

GCF Glass, clear flat

EC13RT only ACS Acrylic, clear smooth

Series

EC13RT ES22ST EH16RT EM17RT ETH16RT ETM17RT

EH22RT EM25RT

Wattage lamp1

Metal Halide 50M MED 50W 70M MED 70W 100M MED 100W 150M MED 150W 175M MOG 175WHigh Pressure Sodium 50S MED 50W 70S MED 70W 100S MED 100W 150S MED 150W

Metal Halide 175M MOG 175W 250M MOG 250W 400M MOG 400WHigh Pressure Sodium 150S MOG 150W 250S MOG 250W 400S MOG 400W

Voltage1

TB1 120V TB23 208V TB3 240V TB4 277V 347 347V 480 480V

Distribution

SR2 Type II SR3 Type III SR4SC Type IV SR4W2 Type IV SR5S Type V

EC13RT only R5 Type V

Options

HS4 House side shield SF Single fusing DF Double fusing

EC13RT only

1DS Decorative shield 2DS 2 decorative shields 2DD 2 decorative discs

Finish

ANBK Black (std.) ANDB Dark bronze DNA Natural aluminum ANWH White

Copenhagen Series

EC13RT 1DS22”w 26.5”h

EC13RT 2DS27”w 26.5”h

EC13RT 2DD27”w 26.5”h

ES22ST22”w 15.5”h

EM17RT17”w 17”h EM25RT

25”w 23”h

ETM17RT20”w 45”h

EH16RT16”w 16”h EH22RT

22”w 22.5”h

ETH16RT18”w 44”h

Hanover Series Munich SeriesStockholm Series

Pendant Mount Post-Top Mount

Listing

UL Listed to US and Canadian safety standards. Suitable for wet locations.

con

teMPo

ra

rY luM

ina

ireso

utD

oo

r


ou

tDo

or

O14

contemporaryPoles

Features

Poles are available in either aluminum or steel. Poles are of one-piece construction with inte-gral anchor/base plate and two-piece base cover or one-piece cast aluminum base with interior anchor bolts. Aluminum poles are available as round, straight, 4” and 5” or as round stepped, 4”/6.63” and 5”/7”. Steel poles are available as round, straight, 4” and 5” or as round stepped, 5”/7”.

Construction – Aluminum poles are manufactured of extruded aluminum, with cast aluminum an-chor plate or base, base cover and handhole cover or access door. Steel poles are manufactured of steel tubing with steel anchor plates and cast alu-minum base cover and handhole cover. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.

Installation – The 4”, 5” and 4”/6.63” poles are supplied with four ¾” diameter, L-type anchor bolts. The 5”/7” aluminum poles are supplied with four 1” diameter, L-type anchor bolts. The 5”/7” steel poles are supplied with four 1¼” diameter, L-type anchor bolts. A handhole with cover is provided in the lower shaft for wiring access for EPAX and EPSX series poles. PXPD18 is provided with access door. Integral tenons are provided as required for mounting contemporary arms and luminaires.

Finish – The poles are finished with a premium polyester powder coating. Standard colors are black, dark bronze, natural aluminum or white. For finish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

ePaXePsX

15”Ø 16”Ø11.5”Ø10.5”Ø

ePaXePsX

ePaX ePaXePsX

s4 s5 s5s7 s5s4

18”Ø

PX PD18

s4s6

Ordering Information Example: ePsX 18 s4 3-3/8t11 anBK

Tenon

4” Poles 3-3/8T11 3.375” x 11” tall tenon 3-3/8T8 3.375” x 8” tall tenon 3T3-1/2 3” x 3.5” tall tenon 3T4 3” x 4” tall tenon

5” Poles 4-3/8T11 4.375” x 11” tall tenon 4-3/8T8 4.375” x 8” tall tenon

Finish

ANBK Black (std.) ANDB Dark bronze DNA Natural aluminum ANWH White

Pole series

Aluminum EPAX

PX PD18

Steel EPSX

Aluminum EPAX

Aluminum EPAX

PX PD18 Steel EPSX

AluminumEPAX

Steel EPSX

Shaft type

4” Poles S4

4” Poles S4

4/6.63” PolesS4S6

5” Poles S5

5/7” PolesS5S7

5/7” Poles S5S7

1012141618

161820

2022

161820

20222426

2224262830

Height

con

teM

Por

arY

Po

les

ou

tDo

or


ou

tDo

or

O15

con

teMPo

ra

rY arM

s

Contemporary Arms &

Wall Brackets

Features

Arms are available in two sizes. The 4” diameter arms are for the Copenhagen, Stockholm, small Hanover and small Munich Series luminaires. The 5” diameter arms are for the large Hanover and large Munich Series luminaires.

Construction – All cast parts are constructed of high-quality cast aluminum. Arm tubing, center spools and wall bracket back plates are fabricated from extruded or formed aluminum. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.

Installation – The arms are designed to slip-fit a 3.375” dia. pole top tenon (4” arms) or 4.375” dia. pole top tenon (5” arms) and attach with (8) socket style set screws. The center finial and arm finial are removable to allow for wiring access. Wall brackets are provided with four or six .56” diameter holes for mounting to the wall. Wall bracket mounting hardware is not provided. Arms and wall brackets are provided with swivel adapters for luminaire mounting. Optional twist-lock photo control is in-stalled at center spool top instead of the finial.

Finish – The arms and wall brackets are finished with a premium polyester powder coating. Stan-dard colors are black, dark bronze, natural alumi-num or white. For finish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Ordering Information Example: eal5/2 Per anBK

4” Arms

Pendant

One-wayEAA4/1EAB4/1EAC4/1EAE4/1EAL4/1

Two-way EAA4/2EAB4/2EAC4/2EAE4/2EAL4/2

Post-top

Two-wayETAA4/2 ETAL4/2

5” Arms

One-wayEAA5/1EAB5/1EAC5/1EAE5/1EAL5/1

Two-way EAA5/2EAB5/2 EAC5/2 EAE5/2 EAL5/2

PendantOptions

PER NEMA twist-lock receptacle only

PE1 NEMA twist-lock photocontrol, 120V, 208V, 240V

PE3 NEMA twist-lock photocontrol, 347V



Finish

ANBK Black ANDB Dark bronze DNA Natural aluminum ANWH White

Wall brackets

4” Arms

EAA4WBEAB4WBEAC4WBEAE4WBEAL4WB

5” Arms

EAA5WBEAB5WBEAC5WBEAE5WBEAL5WB

Post-top

4” Arms

ETAA4WB

ETAL4WB

Pendant

etal4/2

eae4/1

4” One-way Arms for Post-top Luminaires

Pendant arm styles are available as 4” or 5”, one-ways, two-ways and wall brackets. See catalog numbers above for availabilitity.

eae5/2

5” Two-way

eae4WB

4” Wall bracket

eaa4/1

4” One-ways

eaB4/1eac4/1

etaa4/2

eal4/1

4” Two-ways

Arms for Pendant Luminaires

ou

tDo

or


ou

tDo

or

O16

Lens material GCF Glass, clear flat

Series

Mini luminaire OL20

LuminaireOL23

Wattage lampMetal Halide 50M MED 50W 70M MED 70W100M MED 100W 150M MED3 150W 175M MED3 175WHigh Pressure Sodium 50S MED 50W 70S MED 70W 100S MED 100W 150S MED3 150W

For OL20 onlyMetal Halide for T6 lamps 39T6 G12 39W 70T6 G12 70W 150T6 G12 150WLED light LED14

Voltage1

TB1 120V TB25 208V TB3 240V TB4 277V 347 347V 480 480V

OL20 only 120 (for LED or 39T6 only) 277 (for 39T6 only)

Options

HS2 House side shield SF Single fusing DF Double fusing

NOTES:1 Multi-tap ballast (120, 208, 240, 277V) (120, 277, 347V in Canada). For

wattages under 70S or 70M contact ASL for voltage availability.2 HS, house side shield is not available with distribution optionSR5S, SR4SC,

R2, R3 or R5. 3 Not available for OL20.4 LED only available with symmetric (blank) distribution and 120v.5 Consult factory for availability in Canada.

OL2012”w 20”h

OL2323”w 23”h

Oslo SeriesLuminaire & Mini Luminaire

Features

Construction – The luminaires are high-quality cast, die-cast, and spun aluminum. The roof is hinged. Roof and ballast lid (in the OL20) are sealed with gaskets. The lens is tempered flat glass with a continuous seal. All exposed hardware is weather-resistant.

Installation – The luminaires mount on a 3” O.D. x 3” tall tenon with eight, ¼-20 socket set screws. The hinged roof/reflector housing of the OL23 lumi-naire is furnished with captive screws for access to the lamp, reflector and ballast assembly. The OL20 luminaire is furnished with quarter-turn screws for access to the reflector and lamp and the ballast as-sembly mounts on a removable and sealed ballast lid. The reflector in OL23 may be removed without tools. The ballast assembly and reflector are fur-nished with quick-disconnects.

Optics - The luminaires utilize an internal anodized and segmented reflector with socket for horizontal lamp. Reflectors are available in four different dis-tributions and are interchangeable. The standard lu-minaire is also rotatable. Luminaires are furnished with an HID ballast assembly. Luminaire OL20 may also be furnished with an LED lighting assembly.

Finish - The luminaires are finished with a pre-mium polyester powder coating. Standard colors are black, dark bronze, natural aluminum or white. For finish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Listings

UL Listed to US and Canadian safety standards. The luminaire is labeled as suitable for wet loca-tions and has an IP65 rating.

Ordering Information Example: ol23 100M MeD GcF sr2 tB1 sF anBK

Distribution

OL20 only R2 Type II R3 Type III R4 Type IV R5 Type V (blank)4 for LED only

OL23 only SR2 Type II SR3 Type III SR4SC Type IV SR5S Type V

Finish


con

teM

Por

arY

lu

Min

air

eo

utD

oo

r


ou

tDo

or

O17

Series

PX OL17

Height 8 10 12 14 16

Oslo SeriesAluminum Post

Features

Construction – The post is all aluminum, one-piece construction. The base and support rings are high-quality cast aluminum. The base mea-sures 17” in diameter. The four support poles are aluminum, 2.375” O.D. All exposed welds below 10’ are dressed. All exposed hardware is tamper resistant stainless steel.

Installation – The post is provided with four, 0.75” diameter hot-dip galvanized L-type anchor bolts, 55K psi, to be installed on a 12” diameter bolt circle.

Four doors are provided in the base for anchorage access. One door is provided at center for wiring access. A grounding screw is provided inside the base accessible from the center door. At the top of the posts is a 3” diameter by 3” tall tenon for lumi-naire mounting or 3” x 4” tall for arm mounting.

Finish - The post is finished with a premium poly-ester powder coating. Standard colors are black, dark bronze, natural aluminum or white. For fin-ish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Ordering Information Example: PX ol17 14 3t3 anBK

Oslo SeriesArm & Wall Bracket

Features

Construction – The arm and wall bracket are high-quality cast aluminum, one-piece construc-tion. The wall bracket has a decorative cast wall plate. All exposed welds are dressed. All exposed hardware is tamper resistant stainless steel except for wall bracket, black zinc plated mounting hard-ware.

Installation – The arm mounts on a 3” O.D. x 4” tall tenon with six socket set screws. The center finial is removable for wiring access. The wall bracket mounting plate has four .56” diameter holes for

mounting to the wall. It is furnished with four 3/8-16 acorn nuts and washers. Wall studs are furnished by others. Both arm and wall bracket have 3” O.D. x 3” diameter tenons for luminaire mounting.

Finish - The arm and wall bracket are finished with a premium polyester powder coating. Standard colors are black, dark bronze, natural aluminum or white. For finish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Ordering Information Example: olc42 anBK

Mounting Plate 6’w x10”h

Series

Arm OLC42 Wall Bracket OLCWB

Finish


OLC42Arm

OLCWBWall Bracket

Finish


Tenon 3T3 3” O.D. X 3” tall 3T4 3” O.D. X 4” tall

12" Diameter Bolt Circle

Wiring Access Door

17" DiameterPost Base

Anchorage Access Doors

(4 total)

Post Base Detail

42”21”20”

con

teMPo

ra

rY Post, a

rM, W

all B

ra

cKet

ou

tDo

or


ou

tDo

or

O18

Oslo SeriesLighted Bollard

Features

Construction – The bollard is high-quality cast aluminum and aluminum, one-piece construction. The roof is hinged. Roof and ballast lid are sealed with gaskets. The lens is tempered flat glass with a continuous seal. All exposed welds are dressed. All exposed hardware is stainless steel.

Installation – The bollard is provided with four, 0.75” diameter hot-dip galvanized L-type anchor bolts, 55K psi, to be installed on a 6.5” diameter bolt circle. Two doors are provided in the base for anchorage and wiring access. A grounding screw is provided inside the base accessible from the doors. The hinged roof/reflector housing is furnished with socket head screws for access to the lamp and reflector. Both the reflector and bal-last assembly are furnished with quick-disconnect plugs. The ballast assembly mounts on a remov-able ballast lid.

Optics - The bollard utilizes an internal anodized and segmented reflector with socket for horizon-tal lamp. Reflectors are available in four full cutoff distributions and are interchangeable. Luminaire is furnished with an HID ballast assembly or LED lighting assembly.

Ordering Information Example: Blca Bol10lc 100M MeD GcF r2 tB sF anBK

Lens material GCF Glass, clear flat

Series

BLCA BOL10LC

Metal Halide 50M MED 50W 70M MED 70W100M MED 100WHigh Pressure Sodium 50S MED 50W 70S MED 70W 100S MED 100WMetal Halide for T6 lamps 39T6 G121 39W 70T6 G12 70W LED light LED12

Distribution

R2 Type II R3 Type III R4 Type IV R5 Type V (blank)2 for LED only

Options

SF Single fusing DF Double fusing EBB One eyebolt 2EBB Two eyebolts

Wattage lamp1 Voltage3

TB1 120V TB24 208V TB3 240V TB4 277V 347 347V 480 480V

120 (for LED or 39T6 only)

277 (for 39T6 only)

NOTES: 1. 39T6 G12 available with voltage 120 or 277.2. LED only available with symmetric (blank) distribution and 120V.3. Multi-tap Ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). For wattages under 70S or 70M contact ASL for voltage availability. 4. Consult factory for availability in Canada.

Finish


Finish - The bollard is finished with a premium polyester powder coating. Standard colors are black, dark bronze, natural aluminum or white. For finish specifications and color options, see ANTIQUE Street Lamps binder, Finish tab.

Listings

UL Listed to US and Canadian safety standards. The lighted bollard is labeled as suitable for wet loca-tions and has an IP65 rating.

12”w 47”h

BLCA BOL10LC GCFCutoff Lighted Bollard

Bolt Circle6.5” diameter

Base Opening5" diameter

Post Base 10" diameter

con

teM

Por

arY

Bo

lla

rDo

utD

oo

r


ou

tDo

or

O19

site liGH

tinG

Ordering Information Example: asBY 50s r5 120 cr lPi

Voltage

120208240277347TB3

Options

Installed LPI Lamp included L/LP Less lamp SF Single fuse, 120V, 277V, 347V (n/a TB) DF Double fuse, 208V, 240V, 480V (n/a TB) CR Enhanced corrosion resistance H24 24" overall height H30 30" overall height H36 36" overall height FD Festoon outlet FG Festoon outlet with duplex ground fault receptacle4

CSA CSA Certified

NOTES:1 Requires coated lamp.2 120V only.150W max., lamp not provided. 3 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V,

347V; ships as 120V/347V.4 Cover ships separately.

ASBZASBX ASBY

Dimensions are shown in inches (centimeters) unless otherwise noted. ASBX ASBY ASBZ Square: 8 (20.3) 8 (20.3) 8 (20.3) Height: 42 (106.7) 42 (106.7) 42 (106.7) Max. weight: 43.2 lbs (19.6kg) 43.2 lbs (19.6kg) 43.2 lbs (19.6kg)

Architectural Bollards

ASBAeris™

Intended Use

For walkways, plazas or pedestrian areas.

Features

Housing – Bottom housing is 0.188" extruded alumi-num. Decorative Aeris™ top cover is sand-cast with 0.188"minimum wall thickness. 42" overall height standard. Flush-fitting lens is 1/4", clear, 100% vir-gin acrylic. Exposed hardware is tamper-resistant stainless steel. Four 1/2" x 11" anchor bolts with double nuts/washers and 4-1/2" diameter bolt circle template provided for mounting (shipped separately). Dark bronze textured (DDBT) corro-sion-resistant polyester powder finish standard; other architectural colors available.

Optics – Reflector system incorporates an anod-ized, spun aluminum flared cone and an anodized, hydroformed, fluted upper reflector providing a Type V (symmetric) cutoff distribution. Optional

cylindrical lower reflector available.

Electrical – Ballasts are copper wound and 100% factory tested. Electrical components are unit-ized on removable power module and accessible through bottom of bollard. Positive-locking, quick-disconnect on secondary circuit. Medium-base porcelain socket, 4KV pulse rated.

Listings


ASBZASBX ASBY

Series

ASBXASBYASBZ

Wattage

Low pressure sodium50S70S

100S150S

Metal halide70M1

100M1

IncandescentI2

Reflector

Standard flared cone R5 Type V distribution

Optional cylindrical reflector CYA Specular alzak CYB Black alzak CYG Gold alzak CYF Flat black


ou

tDo

or

O20

Intended Use

For walkways, plazas or pedestrian areas.

Features

Housing – KB_6: Bottom housing is 0.125" extrud-ed aluminum. Top cover is 0.156" cast aluminum. KB_8: Bottom housing is 0.156" extruded alumi-num. 42" overall height standard on KBD and KBA6. 43" overall height standard on KBA8. Flush-fitting lens is 1/4", clear, 100% virgin acrylic. All exposed hardware is tamper-resistant stainless steel. Four 1/2" x 11" anchor bolts with double nuts/washers and 4 1/2" diameter bolt circle template provide for mounting (shipped separately). Dark bronze (DDB) corrosion-resistant polyester powder finish standard; other architectural colors available.

Optics – Reflector system incorporates an anod-ized, spun aluminum, flared cone and an anodized, hydroformed, fluted upper reflector providing a Type V (symmetric) cutoff distribution. Optional cylindrical lower reflector or cast aluminum lou-vers available.

Ordering Information Example: KBa6 35s r5 120 cr lPi

KBD – Soft corner

KBA – Dome-top

NOTES:1 120V only.2 Requires coated lamp.3 116W/TS, lamp not included.4 150W max., lamp not included.5 Louver must be used.6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V,

347V; ships as 120V/347V.7 Cover ships separately.8 Not available with LV option, available in 6" units only.9 Consult factory for availability in Canada.

Round Bollards

KBaKBD

Shown with optional louvers.

Dimensions are shown in inches (centimeters) unless otherwise noted. KBD6 & KBA6 KBD8 & KBA8 Diameter: 6 (15.2) 8 (20.3) Height:* 42 (106.7) 42 (106.7) Max. weight: 34.9 lbs (15.9 kg) 34.9 lbs (15.9 kg)

* Also available in 24" (H24), 30" (H30) and 36" (H36). KBD6 KBD8-LVKBA6 KBA8-LV

Electrical – All ballasts are copper wound and 100% factory tested. Electrical components are unitized on removable power module and acces-sible through bottom of bollard. Positive-locking quick disconnect on secondary circuit. Medium-base porcelain socket, 4KV pulse rated.

Listings


site

liG

Hti

nG

Designation

6" BollardsHigh pressure sodium

KB_6 35S1

KB_6 50S KB_6 70S

Metal halide KB_6 50M2

KB_6 70M2

Incandescent KB_6 I1,3

8" BollardsHigh pressure sodium

KB_8 50S KB_8 70S KB_8 100S KB_8 150S

Metal halide KB_8 70M2

KB_8 100M2

Incandescent KB_8 I1,4

Compact fluorescent5

KB_8 26TRT KB_8 32TRT

Reflector

Standard flared cone R5 Type V distributionOptional cylindrical reflector

CYA

Specular alzak CYB Black alzak CYG Gold alzak CYF Flat blackLouver (8" ONLY)

LV Louvers

Voltage

1202089

2409

277347TB6

Options/accessories

Installed LPI Lamp included (n/a with incandes-

cent) L/LP Less lamp SF Single fuse, 120V, 277V, 347V DF Double fuse, 208V, 240V CR Enhanced corrosion resistance H24 24" overall height H30 30" overall height H36 36" overall height FD Festoon outlet FG Festoon outlet with duplex ground

fault receptacle7

CSA CSA CertifiedFor optional architectural colors, see page 543.Shipped separately R6S Half-shield (6" round) R8S Half-shield (8" round)


ou

tDo

or

O21

NOTES:1 Bollard heights are nominal (shown in

inches).2 All lamps (excluding 35CMT6 and 70CMT6)

are coated as recommended unless LPI is specified.

3 MVOLT standard with fluorescent lamps and metal halide lamps with electronic ballast option.

4 Light options are mutually exclusive. Choose one per side. For single circuit wiring, LED light option not available with MVOLT or electronic ballast option operating at 277V, or with 347V. For DCT dual circuit option, secondary LED voltage required to be 120V (for primary voltages: 120V, 208V, 347V, MVOLT) or 240V (for primary voltages 240V or 277V).

5 DCT available with LED color wash option only.

G2™ Family

G2™ louver Bollard

Intended Use

The G2™ Bollard Series is designed to work in building perimeter areas and public spaces completing a wide variety of architectural styles. The G2™ Bollard fixture offers an unmatched impact-resistant mount-ing and leveling design ensuring life-long performance.

Material Copper-free aluminum A360.

LampFluorescent: 42W max., triple tube. HID: 70W max. G12, 100W max. E17.

BallastIntegrally mounted core and coil, electronic ballast with low starting

temperature.

Light OptionsChoose between patent-pending LED color wash or light wash. The LED color wash option adds vibrant color to the bollard and creates the opportunity for customized applications. The optional light wash reflector illuminates the

bollard base by redirecting light from main lamp source.

FastenersStainless steel.

FinishPolyester powder coated in a range of textured semi-matte.

ListingsU.L., C.U.L., IP65, suitable for wet locations.

IES cutoff.

Product

G2LBDG2LBW

Light options – back4

LWB Light wash back LEDAB LED color wash,

amber back LEDBB LED color wash,

blue back LEDRB LED color wash,

green back LEDCWB LED color wash,

cool white back LEDWWB LED color wash,

warm white back

LEDRYB LED color wash, royal blue back

Overall height1

3642

Option

Control DCT Dual circuit5

Fusing DF Double fuse6

SF Single fuse7

Ballast GEB Generic elec-

tronic ballast8

MLEBAD Electronic dim-ming ballast8,9

EL N SD Emergency battery backup self diagnos-tic10

Lamp11

LPI Lamp included

LPIC Lamp included (coated)

Distribution

SYM Symmetric FT Forward

throw

Voltage

120208240277347

120/277MVOLT3

TB

Lamp type

Metal halide2

70M100M

Ceramic metal halide2

70CM100CM

35CMT670CMT6

High pressure sodium2

50S70S

100SFluorescent

26DTT32TRT42TRT

41(1041)

or35

(889)

8(203)

8(203)

8(203) 4

(102)

41(1041)

or35.5(902)

Light center height

36(914)

or30

(762)

9(229)

9(229)

8(203) 4

(102)

G2LBW 6 SF available with 120V, 277V or 347V on HID fixture only.

7 DF available with 208V or 240V on HID fixture only.

8 Electronic ballast options available with metal halide lamps only.

9 0-10V remote analog dimmer system required (by others).

10 Available with fluorescent only.11 LPIC recommended for E17 and ED17

lamps. Not available with fluorescent, 35CMT6 or 70CMT6HID lamps.

12 Standard louver finish: matte black top, high gloss white bottom unless __/PL is chosen. __/PL is not recommended for DWHG white or other light color finishes due to increased visible glare and reduced fixture cutoff.

Light options – front4

LWF Light wash front LEDAF LED color wash,

amber front LEDBF LED color wash,

blue front LEDRF LED color wash,

red front LEDCWF LED color wash,

cool white front LEDWWF LED color wash,

warm white front

LEDRYF LED color wash, royal blue front

G2LBD

Finish

DBLB Designer black, textured

DSPD Dark gray, textured DNAT Natural aluminum,

textured DWHG Designer white,

textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom finish _/PL Louvers to match12

arcH

itectu

ra

l site liGH

t

Ordering Information Example: G2lBD 36 100M Mvolt sYM leDBF leDcWB Dct GeB lPic Dnat

ou

tDo

or


ou

tDo

or

O22

contents

architectural Flood lights o23

specification Flood lights o24

Par Holders o27

architectural Flood lights o28

accent lighting o29

Border Flood lighting o34

linear Flood lighting o35

architectural landscape o36

swimming Pool - Fountain o38

Flood Lighting Landscape Lighting


ou

tDo

or

O23

Floo

DliG

Htin

GArchitectural Floodlights

ASFAeris™

Intended Use

For landscape and facade lighting.

Features

Housing – Rugged, die-cast, single piece low copper alloy aluminum housing. Die-cast door frame has im-pact-resistant, tempered glass lens. Door frame is fully sealed with a closed cell silicone gasket. Standard fin-ish is textured dark bronze (DDBT) polyester powder. Other architectural colors available.

Optics – Anodized aluminum reflectors; segmented, specular or hammertone finish. Reflectors are inter-changeable and allow for tool-less access to electrical components.

Electrical – 150W and below utilizes a high reac-tance, high power factor ballast. 175W and above utilizes a constant-wattage autotransformer bal-last. Compact fluorescent uses an electronic high frequency ballast. Optional pulse start ballast available. Quick disconnect plugs easily discon-

nect reflector from ballast and fixture from supply wires. Ballasts are precision wound and 100% fac-tory tested.

Socket – Porcelain, medium base socket for ASF1, mogul-base socket for ASF2, with copper alloy, nickel-plated screw shell and center contact (UL Listed 660W, 600V, 4KV pulse rated). Fluorescent is four-pin positive latching thermoplastic. UL Listed.

Installation – ASF1 standard mounting is cast 3/4" threaded knuckle. ASF2 standard mounting is heavy-duty, cast-aluminum swivel which fits over standard 1-1/2" (1.9" O.D.) to 2" (2.38" O.D.). Op-tional yoke mounting available in both sizes.

Listings

UL Listed to U.S. and Canadian safety standards. NOM Certified (see Options). IP66 rated. Patents pending.

Ordering Information Example: asF1 175M WDF 120 sF lPi

Distribution

NSP Narrow spot SP Spot HSP Horizontal

spot MDF Medium

flood WDF Wide flood VFW Vertical

flood-wide VFN Vertical

flood- narrow

Voltage120

2085

2405

2773474805

TB6

TBV 7

MVOLT 8

Optional mounting

Installed (blank) ASF1 3/4" threaded knuckle

(std.) (blank) ASF2 swivel (std.) YK Yoke mountShipped separately AFSTMTHK Stanchion mount for 3/4"

THK option9

AFSTM Stanchion mount AFTM Tenon base mount AFWMA Wall-mount arm AFWMATHK Wall-mount arm for 3/4"

THK option9

AFWMPTHK Wall-mount plate for 3/4" THK option9

AFTS Architectural tenon slipfitter for 3/4" THK option9

AFTMBTHK Twin mounting bar for 3/4" THK option9

AFTMB Twin mounting bar AFJB Architectural J-box for 3/4" THK option9

FCRA45 Cross arm adaptor10

FPMB Wall/pole mounting bracket10

Installed SF Single fuse, 120V, 277V, 347V (n/a

TB or TBV) DF Double fuse, 208V, 240V, 480V

(n/a TB or TBV) GMF Internal slow-blow fusing (n/a

MVOLT; CF only) EC Emergency circuit (100W max.,

lamp not included.)11

QRS Quartz restrike system (100W max., lamp not included)11

QRSTD Quartz restrike time delay (100W max., lamp not included)11

CR Enhanced corrosion resistance CRT Non-stick protective coating PE Photoelectric cell, button type

(n/a TB, TBV or MVOLT)13

SCWA Super CWA pulse start ballast14

CSA CSA Certified NOM NOM Certified LPI Lamp(s) included L/LP Less lamp(s) 2/1 Two 1-lamp ballasts (compact

fluorescent only)12

Shipped separatelyNOTES:1 May be ordered with SCWA.2 Must be ordered with SCWA.3 ED-28 reduced jacket lamp required.4 Available with WDF distribution only.5 Consult factory for availability in Canada.6 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V;

ships as 120V/347V.7 Optional five-tap ballast (120V,208V,240V,277V,180V; not available in Canada).8 Multi-volt electronic ballast for compact fluorescent; ships standard on CFL watt-

ages.9 For use with THK mounting only.10 For use with yoke mounting only. Must include yoke mount option on fixture.11 ASF2 only. EC, QRS, and QRSDT options cannot be ordered together.12 ASF1 only.13 Must be ordered with fixture; can not be field installed.14 Not available with HPS or CFL.15 Consult factory for availability.16 Additional architectural colors available; see www.lithonia.com for more informa-

tion.17 Not available with NSP or SP distributions.

ASF1 ASF1GS Glare shield (upper or

bottom visor) ASF1EV Eggcrate visor (black) ASF1FV Full visor ASF1BD Barn door ASF1BVG Vandal guard ASF1FV/BVG Full visor and vandal

guardASF2 ASF2GS Glare shield (upper or

bottom visor) ASF2EV Eggcrate visor (black) ASF2FV Full visor ASF2BD Barn door ASF2BVG Vandal guard ASF2FV/BVG Full visor and vandal

guardOutdoor remote ballast15

HRBW HID remote ballast weath-erproof (black)

Dimensions are shown in inches (centimeters) unless otherwise noted. (ASFI shown) ASF1 ASF2 EPA: 1.2 ft2 2.0 ft2

Width: 7.62 11 Length: 15.5 21.5 Overall height: 10.80 18.5 Max. weight: 20 lbs 35 lbs

Indoor remote ballast15

HRB HID remote ballast (white)

Architectural colors16

DDBT Dark bronze (std.) DSST Sandstone DNAT Natural aluminum DWHG White DBLB BlackOptional textured colors DBNH Bronze DSPD Dark gray DSPJ Light gray DSPE Green DSPG Dark red DSPF Rust DSPH Red

Options/accessories

ASF1 shown

Lamp/Fixture Data Lamp Base NEMA Wattage Distribution Ballast type type dist.High pressure sodium (med/mog/clear) 150 HSP HX-HPF E17 medium 5x3 150 WDF HX-HPF E17 medium 7x6 400 HSP CWA ET18 mogul 7x3 400 WDF CWA ET18 mogul 7x6Metal halide (med/mog/clear) 175 NSP CWA E17 medium 1x2 175 HSP CWA E17 medium 5x3 175 WDF CWA E17 medium 7x6 400 NSP CWA ED28 mogul 1x3 400 HSP CWA ED28 mogul 7x5 400 WDF CWA ED28 mogul 7x6Compact fluorescent (double twin-tube/triple-tube) 57TRT WDF electronic, HPF T4 GX24Q-5 7x6 70TRT WDF electronic, HPF T4 GX24Q-6 7x6

Designation

High pressure sodium ASF1 50S ASF1 70S ASF1 100S ASF1 150S ASF2 200S ASF2 250S ASF2 400S17

Metal halide ASF1 50M ASF1 70M ASF1 100M ASF1 150M1

ASF1 175M ASF2 200M2

ASF2 250M1

ASF2 320M2

ASF2 350M2

ASF2 400M1,3

Compact fluorescent4

ASF1 26DTT ASF1 2/26DTT ASF1 32TRT ASF1 2/32TRT ASF1 42TRT ASF1 2/42TRT ASF1 57TRT ASF1 2/57TRT ASF1 70TRT


ou

tDo

or

O24

Specification Large Floodlights

TFAContour®

Ordering Information Example: tFa 1000M ta tB lPi

D

H

W

Lamp/Fixture Data Lamp Beam spread NEMAWattage Dist. Ballast type H°xV° dist.High pressure sodium (mog/clear) 400 TA CWA ET18 140x134 7x7 400 RN CWA ET18 127x30 6x3 400 TA2 CWA ET18 138x112 7x6 400 RB CWA ET18 126x106 6x6 1000 TA CWA E25 139x133 7x7 1000 RN CWA E25 127x21 6x2 1000 TA2 CWA E25 144x119 7x6 1000 RB CWA E25 128x114 6x6Metal halide (mog/clear) 400 TA CWA BT37 143x133 7x7 400 RN CWA BT37 129x35 6x3 400 TA2 CWA BT37 135x111 7x6 400 RB CWA BT37 124x100 6x6 1000 TA CWA BT56 146x135 7x7 1000 RN CWA BT56 130x45 6x3 1000 TA2 CWA BT56 144x119 7x6 1000 RB CWA BT56 126x109 6x6

Intended Use

For industrial yards, parking lots, construction sites, streets and recreational areas.

Features

Housing – Heavy-duty construction. Contoured die-cast aluminum housing and front bezel. Bezel hinged and latched for fast, easy tool-less internal access to optical and electrical compartments. Lens is heavy-duty, thermal shock-resistant, clear tempered glass with no metal-to-glass contact. Standard finish is dark bronze (DDB) corrosion-resistant polyester powder.

Optics – Computer-designed, precision die-formed, specular anodized aluminum reflector provides high efficiencies. Premium, one-piece silicone gasket seals optical chamber to inhibit entrance of outside contaminants. Other architec-tural colors available.

Electrical – High-power factor, constant-wattage

Voltage

1202084

2404

2773474804

TB5

TBV6

Installed LPI Lamp included L/LP Less lamp SF Single fuse, 120V, 277V, 347V1

DF Double fuse, 208V, 240V, 480V1

EC Emergency circuit7,8

QRS Quartz restrike system7,8

QRSTD Quartz time delay7,8

CR Enhanced corrosion resistance CRT Non-stick protective coating9

PER NEMA twist-lock receptacle10

IS Integral slipfitter (2-3/8" to 2-7/8" OD tenon)

CF Charcoal filter C62 2' 16-3 cord prewired11

C42 2' 14-3 cord prewired11

C22 2' 12-3 cord prewired11

TP Tamperproof latches SCWA Super CWA pulse start ballast (n/a

HPS) CSA CSA Certified12

NOM NOM Certified (consult factory)

Options/accessories

Dimensions are shown in inches (centimeters) unless otherwise noted. EPA: 2.6 ft2 (.24 m2) Width: 22 (59.9) Depth: 9-3/4 (24.7) Height: 18-3/4 (47.6) Overall height: 22-1/2 (57.1) Weight: 65 lbs (29.5 kg)

Horizontal Vertical RN TA RB RC RE TA2 RM RN TA RB RC RE TA2 RM RN TA RB – – TA2 RM RN TA RB – – TA2 RM

RN TA RB RC RE TA2 RM RN TA RB RC RE TA2 RM RN TA RB RC RE TA2 RM RN TA RB RC RE TA2 RM RN TA – – – – – RN TA RB – RE TA2 RM

NOTES:1 Not available in multi-tap ballast.2 May be ordered with SCWA.3 Must be ordered with SCWA.4 Consult factory for availability in Canada.5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V,

347V; ships as 120V/347V.6 Optional 5-tap ballast (120V, 208V, 240V, 277V, 480V), n/a in Canada.7 Lamp included.8 Quartz lamp wattage not to exceed ballast wattage rating.9 Black finish only.10 Photocell not included.11 Yoke-mount only.12 Not available with TBV.13 Field modification required unless ordered with fixture.14 Requires IS or FTS slipfitter.15 PER must be ordered with fixture.

autotransformer. Ballast is copper wound and 100% factory tested. UL Listed. Electrical compo-nents mounted to rear housing for maximum heat dissipation.

Socket – Porcelain, horizontally or vertically ori-ented, mogul-base socket with copper alloy, nick-el-plated screw shell and center contact. UL Listed 1500W, 600V.

Installation – Tool-less latches on front bezel can be opened while wearing gloves. Corrosion-resis-tant, painted steel yoke.

Listings

UL Listed (standard) (ambient temperature 25°C for 750W and above, 40°C for 400W and below). CSA Certified or NOM Certified (see Options). UL Listed for wet locations. IP65 rated.

Flo

oD

liG

Hti

nG

Distribution

Shipped separately TFAWG Wireguard13

TFAVG Vandal guard13

TFAUV Upper visor13

TFAFV Full visor13

TFABV Bottom visor13

FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)11

FCRA Crossarm adapter (horizontal)11

FCRA45 Crossarm adapter (45° from horizontal)11

FPMB Wood pole/pipe/wall-mounting bracket (includes FCRA)11

FWPB Wall/wood pole/pipe bracket11

FRWB Radius wall bracket14

FSAB Steel angle bracket11

FSPB Steel square pole bracket (for use with existing poles)14

PE1 NEMA twist-lock photocontrol (120V, 208V, 240V)15

PE3 NEMA twist-lock photocontrol (347V)15



SC Shorting cap TM Tenon mount14

Designation

High pressure sodium TFA 250S TFA 400S TFA 750S1

TFA 1000SMetal halide

TFA 250M2

TFA 320M3

TFA 350M3

TFA 400M2

TFA 750M3

TFA 1000M2


ou

tDo

or

O25

Ordering Information Example: tFM 175M rB 120 lPi

Intended Use

For signs, flags, building facades and landscaping.

Features

Housing – Compact, heavy-duty construction. Die-cast aluminum housing and removable front bezel. Lens is thermal and shock-resistant, clear tempered glass. Standard finish is dark bronze (DDB) corrosion-resistant polyester powder. Other architectural colors available.

Optics – Hydroformed, anodized aluminum, facet-ed parabolic (RB, RG) or die-formed (TA) construc-tion provides high efficiencies.

Electrical – Ballast is high-reactance, high-power factor for 50-150W metal halide or constant watt-age autotransformer for 175W metal halide. Ballast is reactor normal-power factor for high pressure sodium (XHP available). Ballast is copper wound and 100% factory tested. UL Listed. Electrical com-ponents mounted to the cast-aluminum housing for maximum heat-dissipation.

Installed SF Single fuse, 120V, 277V, 347V8,9

DF Double fuse, 208V, 240V, 480V8,9

GMF Internal slow-blow fuse, CF only (n/a MVOLT) CR Enhanced corrosion resistance CRT Non-stick protective coating10

PE Photoelectric cell, button type8

XHP High reactance high power factor ballast11

LPI Lamp included L/LP Less lamp YK Yoke mounting C62 2' 16-3 cord pre-wired12

C42 2' 14-3 cord pre-wired12


CSA CSA Certified13

NOM NOM Certified (consult factory) SCWA Super CWA pulse start ballast (only available in

150M with TA distribution)Shipped separately TFMWG Wireguard TFMVG Vandal guard TFMUV Upper visor14

TFMFV Full visor14

TFMTS Tenon slipfitter (2-3/8" OD tenon, for ground mounting only)

TM Tenon mount15

NOTES:1 120V only, n/a XHP.2 TA distribution not available with 175M, compact fluorescent lamps, TBV or

fusing.3 Consult factory for availability in Canada.4 Not available in Canada.5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V,

347V; ships as 120V/347V.6 Optional 5-tap ballast (120V, 208V, 240V, 277V, 480V), n/a in Canada.7 Optional multi-volt electronic ballast (for compact fluorescent lamps only)

capable of operating on any line voltage from 120V-277V.8 Not available in multi-tap ballast, 347V or 480V.9 Not available with TA reflector. 10 Black finish only.11 Available for 120V only. Standard for 208V, 240V, 277V, 347V, TB and TBV.12 Yoke mounting only.13 Not available with TBV.14 Field modification required unless ordered with fixture.15 Requires TFMTS.

Specification Mini Floodlights

TFMContour®

Dimensions are shown in inches (centimeters) unless otherwise noted. EPA: .5ft2 (.05m2) Width: 10.6 (26.9) Depth: 6.9 (17.5) Height: 10-1/2 (26.7) Weight: 15 lbs (6.8 kg)

H

W D

10-1/2"

Socket – Porcelain, medium-base, horizontally-oriented (RB, RG) or vertically-oriented (TA) socket with copper alloy, nickel-plated screw shell and center contact. UL Listed 1500W, 600V. 4-pin socket for compact fluorescent.

Installation – Die-cast aluminum 1/2" NSPM threaded mounting knuckle is standard. Corrosion-resistant painted steel yoke optional. Above-hori-zontal aiming standard. External screws treated for corrosion resistance.

Listings

UL Listed (standard) (ambient temperature 25°C for 150M and above, 40°C for 100M and below; 150S and below). CSA Certified or NOM Certified (see Options). UL Listed for wet locations. IP65 rated.

Floo

DliG

Htin

G

Options/accessoriesDesignation

High pressure sodium TFM 35S1

TFM 50S TFM 70S TFM 100S TFM 150S

Metal halide TFM 50M TFM 70M TFM 100M TFM 150M TFM 175M

Compact fluorescent TFM 13DTT TFM 18DTT TFM 26DTT TFM 32TRT TFM 42TRT

Distribution

TA (7x6)2

RB (6x6) RG (3x3)

Voltage

120 2083

2403

277 4804

TB5

TBV6

MVOLT7

Lamp/Fixture Data Lamp Beam spread NEMA Wattage Dist. Ballast type H°xV° dist.High pressure sodium (med/clear) 70 RB RNP or XHP E17 94x104 5x6 70 RG RNP or XHP E17 42x35 3x3 70 TA RNP or XHP E17 131x103 7x6 150 RB RNP or XHP E17 88x95 5x5 150 RG RNP or XHP E17 57x65 4x4 150 TA RNP or XHP E17 131x103 7x6Metal halide (med/clear) 100 RB XHP E17 83x108 5x6 100 RG XHP E17 58x60 4x4 100 TA XHP E17 128x107 6x6 175 RB CWA ED17 97x105 5x6 175 RG CWA ED17 42x35 4x4Fluorescent 26DTT RB electronic, HPF T4 125x132 6x6 42TRT RB electronic, HPF T4 120x122 6x6


ou

tDo

or

O26

Options/accessories

NOTES:1 Must be ordered with SCWA.2 May be ordered with SCWA.3 Consult factory for availability in Canada.4 Not available in Canada.5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V,

347V; ships as 120V/347V.6 Optional 5-tap ballast (120V, 208V, 240V, 277V, 480V), n/a in Canada.7 Not available in multi-tap ballast.8 Lamp included.9 Quartz lamp wattage not to exceed ballast wattage rating.10 Black finish only.11 Photocell not included.12 Yoke mounting only.13 Not available with TBV.14 Field modification required unless ordered with fixture.15 Requires IS or FTS slipfitter.16 PER must be ordered with fixture.

Intended Use

For recreation areas, parking lots, building facades and car lots.

Features

Housing – Compact, soft corner, die-cast aluminum housing and front cover. Front bezel is removable via position-oriented hinge-cam design and is fully sealed with one-piece, bonded silicone gasket. Lens is thermal- and shock-resistant clear tempered glass. Standard finish is dark bronze (DDB) corrosion-resis-tant polyester powder.

Optics – Die-formed, anodized aluminum reflectors provide rectangular, uniform distributions. Three available beam distributions for maximum flexibility in area lighting applications. Does not require use of reduced-size lamp.

Electrical – Components mounted to cast-aluminum housing, promoting maximum heat dissipation. Bal-last is high-reactance HPF (70-150W HPS). 150M ballast is high reactance HPF constant-wattage au-

Distribution

TA (7x6) (n/a 150S) RB (6x6) RC (5x5)

Designation

High pressure sodium TFR 150S TFR 250S TFR 400S

Metal halide TFR 150M2

TFR 175M TFR 200M1

TFR 250M2

TFR 320M1

TFR 350M1

TFR 400M2

Voltage

1202083

2403

2773474804

TB5

TBV6

Ordering Information Example: tFr 400M ta tB lPi

Installed SF Single fuse, 120V, 277V, 347V7

DF Double fuse, 208V, 240V, 480V7

EC Emergency circuit8,9

QRS Quartz restrike system8,9

CR Enhanced corrosion resistance CRT Non-stick protective coating10

PER NEMA twist-lock photoelectric receptacle11

IS Integral slipfitter (2-3/8" O D tenon) LPI Lamp included L/LP Less lamp C22 2' 12-3 cord pre-wired12



CF Charcoal filter CSA CSA Certified13

NOM NOM Certified (consult factory) SCWA Super CWA pulse start ballast (n/a

HPS or 175M)

Specification Medium Floodlights

TFRContour®

Dimensions are shown in inches (centimeters) unless otherwise noted. EPA: 1.3ft2 (.12m2) Height: 12-3/4 (32.4) Width: 17-5/8 (44.8) Depth: 10-3/4 (27.3) Weight: 29 (13.2 kg)

W D

H

6"

2"

1-1/4"

11/16"

11/16" 11/16"

1-1/4"

totransformer (175W and above HPS, MH), copper wound and 100% factory tested. UL Listed.

Socket – Porcelain (medium base: 150M; mogul base: all others) horizontally oriented with copper alloy, nickel plated screw shell and center contact. UL Listed 1500W, 600V, 4KV pulse rated.

Installation – Corrosion-resistant, heavy-duty painted steel mounting yoke. External screws treated for corro-sion resistance. Above-horizontal aiming standard.

Listings

UL Listed (standard) (ambient temperature 25°C for 320W and above, 40°C for 250W and below). CSA Certified or NOM Certified (see Options). UL Listed for wet locations. IP65 rated.

Flo

oD

liG

Hti

nG

Shipped separately TFRWG Wireguard14

TFRVG Vandal guard14

TFRUV Upper visor14

TFRFV Full visor14

FRWB Radius wall bracket15

FSAB Steel angle bracket12

FWPB Wall/wood, pole/pipe bracket12

FSPB Steel square pole bracket (for use with existing poles)15

FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)12

FCRA Crossarm adapter (horizontal)12

FCRA45 Crossarm adapter 45° from horizontal12

FPMB Wood pole/pipe/wall mounting bracket (includes FCRA)12

TM Tenon mount15

EY Extended yoke PE1 NEMA twist-lock photocontrol (120V, 208V, 240V)16




SC Shorting cap for PER option

Lamp/Fixture Data Lamp Beam spread NEMA Wattage Dist. Ballast type H°xV° dist.High pressure sodium (mog/clear) 150 RB XHP E17 114x107 6x6 150 RC XHP E17 100x92 5x5 250 TA CWA ET18 132x118 7x6 250 RB CWA ET18 110x104 6x6 250 RC CWA ET18 99x97 5x5 400 TA CWA ET18 132x118 7x6 400 RB CWA ET18 110x104 6x6 400 RC CWA ET18 99x97 5x5Metal halide (mog/clear) 175 TA CWA BT28 132x111 7x6 175 RB CWA BT28 121x91 6x5 175 RC CWA BT28 100x90 5x5 250 TA CWA BT28 132x111 7x6 250 RB CWA BT28 121x91 6x5 250 RC CWA BT28 100x90 5x5 400 TA CWA BT37 138x119 7x6 400 RB CWA BT37 124x107 6x6 400 RC CWA BT37 96x100 5x5

ou

tDo

or


ou

tDo

or

O27

General Purpose

PAR HoldersIntended Use

Provides general illumination in commercial appli-cations. Ideal for use in parking garages and other outdoor areas where security is a concern.

Features

Sturdy, weather and rust-resistant metal housing available in bronze or white finish (gasket includ-ed). Tool-free adjustable heads for up/down and side-to-side aiming. Uses outdoor rated, incan-descent PAR lamps. These fixtures are designed for easy mounting to junction box.

Utilizes 150W, PAR medium-base incandescent lamp(s) not included.

Ordering Information Example: oFtH 300 Pr 120 BZ

Listings

cUL Listed to US and Canadian safety standards.

NOTES:1 Lamps Not Included2 150 watt maximum lamp wattage

Availability and Dimensions

Fixture/Finish Model Number Dimensions Number of lamps1

Dusk-to-Dawn Bronze Twin PAR Holder OFTH 300PR 120 P BZ 5-1/2" x 7" x 5" (2) 150W, PAR medium base

Dusk-to-Dawn White Twin PAR Holder OFTH 300PR 120 P WH 5-1/2" x 7" x 5" (2) 150W, PAR medium base

Bronze Twin PAR Holder OFTH 300PR 120 BZ 5-1/2" x 7" x 5" (2) 150W, PAR medium base

White Twin PAR Holder OFTH 300PR 120 WH 5-1/2" x 7" x 5" (2) 150W, PAR medium base

White Single PAR Holder OFSH 150PR 120 WH 5-1/2" x 5-1/2" x 5" (1)150W,PARmedium base

PAR Twin Head Holders

PAR Single Head Holder

Dusk-to-Dawn PAR Twin Holders

Model number1,2

Dusk-to-Dawn OFTH 300PR 120 P BZ 5-1/2" x 7" x 5", (2) 150W PAR medium base OFTH 300PR 120 P WH 5-1/2" x 7" x 5", (2) 150W PAR medium baseTwin OFTH 300PR 120 BZ 5-1/2" x 7" x 5", (2) 150W PAR medium base OFTH 300PR 120 WH 5-1/2" x 7" x 5", (2) 150W PAR medium baseSingle OFSH 300PR 120 WH 5-1/2" x 5-1/2" x 5", (1) 150W PAR medium base

Floo

DliG

Htin

Go

utD

oo

r


ou

tDo

or

O28

NOTES:1 Available in 120V only. 2 MVOLT is the standard voltage for fluores-

cent lamps.3 Available with T6 and T4 lamps only.4 Available with E17 and TRT lamps only.5 Available with TSP and MFL distributions

only.6 Available with FL distribution only.7 Not available with NHSP.8 Accessories are mutually exclusive. Choose

one.

* Mounting not included.

Ordering Information Example: 7000 70M 120 FL YM SMSA18 BD LPI BL

Intended Use

The 7000 Series floodlight is a compact, high-performance outdoor fixture used for façade and landscape lighting.

Material Die-cast aluminum housing and door.

LensFlat tempered glass.

LampIncandescent: T-4, mini-can to 100W. Fluorescent: TRT triple-tube lamps to 42W. HID: T-6, G12 to 70W, E-17 medium-base to 70W; elliptical, E-27 to 80W.

NOTE: All lamps must be rated for “Universal Burning Position” because fixture tilt changes lamp orientation.

SocketIncandescent: mini-can screw base. Fluorescent: 4-pin, GX24Q base. HID: G-12, medium, or E27 base pulse-rated 4KV.

ReflectorHigh purity anodized specular, semi-specular or patterned lighting sheet in various configurations designed to provide maximum performance and uniformity.

Electrical ComponentsIntegrally mounted ballasts rated for low temperatures.

FinishPolyester powder coated in a range of textured or semi-matte finishes.


Weight20 lbs.

EPA0.64


Product

7000

Mounting

KM Knuckle mount YM Yoke mount

Finish

BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

Distribution

TSP Tight spot3

NHSP Narrow hori-zontal spot3

MFL Medium flood3

FL Flood4

Voltage

120208240277347

120/277MVOLT2

TB

Mounting accessories

Consult factory.

Lamp type

Incandescent1

100QFluorescent2

26TRT32TRT42TRT

Metal halide70M

Ceramic metal halide 70CM

35CMT670CMT6

High pressure sodium35S1

50S70S

Accessories

Internal ISS Internal source shield5

IHL Internal honeycomb louver6,7

CFAMB Color filter amber7

CFRED Color filter red7

CFBLU Color filter blue7

CFGRN Color filter green7

External8

BD Barn doors GS Glare shield

8-1/4(210)

11-3/4(298)

13-7/8(353)

Flo

oD

liG

Hti

nG

6(153)

11-3/4(298)

5-3/4(146)

7000 KM

7000 YM

Lamp

LPI Lamp included

Architectural Floodlights

7000

ou

tDo

or


ou

tDo

or

O29

lan

Dsc

aPe liG

Htin

G

Intended Use

Low-profile accent light for shrubs, planters or wall mountings.

Ordering Information Example: 4511 M35 12 SP WMC LPI DNA

Lamp

LPI Lamp included

Lamp type

Low voltageM35

Voltage

121

1202

2772

Distribution3

NR No reflector SP Spot

Product

4511


Consult factory

NOTES:1 Transformer sold separately.2 Only valid when transfomer box is

ordered.3 Distribution only required with LPI option.

All others choose NR.

MaterialHousing is machined aluminum alloy. Knuckle is cast bronze.

LampLow voltage: MR-11, 35W max.

LensTempered flat glass.

Mounting1/2” NPT adjustable knuckle.

ListingsU.L., CSA, IP66, suitable for wet locations.

Requires low voltage supply.

Intended Use

Low-profile accent light for shrubs, planters or wall mountings.

Ordering Information Example: 4516 M50 12 SP WMSA LPI DNA

Lamp type

Low voltageM50

Voltage

121

1202

2772

Product

4516


Consult factory

NOTES:1 Transformer sold separately.2 Only valid if transfomer box is ordered.3 Distribution only required with LPI option.

All others choose NR.

MaterialHousing is die-cast, copper-free aluminum alloy A360. Knuckle is cast bronze.

LampLow voltage: MR-16 quartz halogen, 50W max.

LensTempered flat glass.


ListingsU.L., CSA, IP66, suitable for wet locations.

Requires low voltage supply.

Finish


5-3/8(137)

3-7/16(87)

2-9/16(65)

1-15/16(49)

3-3/16(81)

2-3/4(70)

5-1/8(130)

Distribution3

NR No reflector SP Spot NSP Narrow spot FL Flood NFL Narrow flood WFL Wide flood

Finish


Lamp

LPI Lamp included

4516 Head

Accent Lighting

4511Head

ou

tDo

or


ou

tDo

or

O30

Finish

BL Black BZ Bronze DDB Dark

bronze DNA Natural

aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde

green WH White CF Custom

Ordering Information Example: 4519 P38250I 120 SP JBA LPI DDB

Distribution4

NR No reflec-tor

SP Spot FL Flood WFL Wide flood

Product

4519

Intended Use

Spotlights architectural or landscape features from the ground, wall mountings or trees.

MaterialCast aluminum with cast bronze knuckle.

LampIncandescent: PAR38 to 250W max. Metal halide: PAR 38 to 150W max.

LensIncandescent: No lens. Lamp face forms lens on incandescent. HID: convex, clear tempered glass. Amber, blue, green or red lenses available.



ListingsU.L., CSA, suitable for wet locations.

Lamp type

Incandescent1 P38100IP38120IP38250I


P2035CMP3870CM

P38100CM Metal halide2

P3870MP38100MP38150M

Voltage

120208240277347

120/277MVOLT3

TB

Lens5

CLC Convex lens clear CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red

Options

Fusing SF Single fuse6

DF Double fuse7

Ballast GEB Electronic

ballastNOTES:1 Available with 120V only.2 Separate ballast enclosure required for HID models.3 MVOLT is standard on metal halide lamps with GEB ballast

option.4 Not all distributions available with all lamp types, use NR

when not using LPI option.5 CLC will be used if no lens is chosen on HID.6 SF is available with 120V or 277V on HID only.7 DF is available with 208V, 220V or 240V on HID only.

Finish

BL Black BZ Bronze DDB Dark

bronze DNA Natural



Ordering Information Example: 4524 A P2035CM 277 SP CLC SPCA LP BL

Lamp

LP Lamp installed

Distribution4

NR No reflector NSP Narrow

spot SP Spot NFL Narrow

flood FL Flood WFL Wide flood

Product

4524


Consult factory

Lamp type

Low voltage1

M35M50M75

IncandescentP1640IP1655IP1660IP2050IP2060I


P2035CM

Voltage

122

1202083

2403

277347

120/2773

MVOLT3

TB3

Lens5

CLC Convex lens clear

CLA Convex lens amber

CLB Convex lens blue

CLG Convex lens green

CLR Convex lens red

Options

Fusing SF Single

fuse6

DF Double fuse7

Intended Use

Accents trees, shrubs, signs and walls from the ground, wall mountings or trees.

MaterialHeavy wall cast aluminum or bronze.

LampLow voltage: MR16, 75W max. Incandes-cent: PAR-16 or PAR-20, 60W max. HID: metal halide PAR-20, 35W max.

LensClear convex tempered glass. Amber, blue, green and red lenses also are available.



ListingsU.L., CSA, suitable for wet locations.

Accessories

Internal IHL Internal

honeycomb louver

External GS Glare shield

NOTES:1 Separate ballast enclosure required for HID models, transformers for low voltage.2 Transformer sold separately.3 Only available with HID lamps.4 Not all distributions available with all lamp types, use NR when not using LPI option.5 CLC will be used if no lens is chosen on HID.6 SF is available with 120V, 277V or 347V on HID only.7 DF is available with 208V or 240V on HID only.

lan

Dsc

aPe

liG

Hti

nG

9-1/4(235)

6-3/8(166)

2-1/2(76)

5-5/8(140)

3-7/8(98)

6(152)

Lamp

LPI Lamp included

Materials

A Aluminum B Bronze


Consult factory

Accessories

GS Glare shield

Accent Lighting

4519Head

4524Head

ou

tDo

or


ou

tDo

or

O31

lan

Dsc

aPe liG

Htin

G

Intended Use

Uplighting of trees, signs, walls and building façades.

Ordering Information Example: 4529 B P38150I 120 SP JBB LP

Lamp type

IncandescentP38100IP38150I

Voltage

120

Distribution1

NR No reflector SP Spot FL Flood WFL Wide flood

Product

4529


Consult factory

MaterialCast aluminum or cast bronze body and glare shield. Knuckle is cast bronze.

LampIncandescent: PAR38 medium-base.

LensNone.



ListingsU.L., suitable for wet locations.

Material

A Aluminum B Bronze

Finish2


NOTES:1 Not all distributions available with all

lamp types, use NR when not choosing LPI option.

2 Finish required on aluminum products.

Intended Use

Tree mounted or ground mounted uplighting, or building-mounted facade lighting.

Ordering Information Example: 4610 M50 277 FL KM SSB IHL FGS LPI SND

MaterialFixture, knuckle, yoke – copper-free aluminum A360. All aluminum materi-als are chem filmed or anodized prior to painting.

LampMR-16, 50W max.

LensCrowned tempered glass.

MountingKnuckle1/2” NPT adjustable. Yoke mount with a minimum of 10 Ft. 18/3 STW Cord. Cord length must be specified.



Finish

BL Black BZ Bronze DDB Dark bronze DNA Natural



Lamp

LPI Lamp included

Distribution5

NR No reflector

NSP Narrow spot

SP Spot NFL Narrow

flood FL Flood WFL Wide

flood

Product

46101

46202


Consult factory.

Lamp type

Low voltage M202

M352

M502

M751


20CMT411

35CMT44

P2035CM

Mounting

KM Knuckle mount

YM Yoke mount

Options

Fusing SF Single

fuse6

DF Double fuse7


ballast8

Accessories

Internal IHL10 Internal

honeycomb louver

CFAMB Color filter amber

CFBLU Color filter blue

CFGRN Color filter green

CFRED Color filter red

External GS Glare shield FGS Full glare

shield

Cord set length9

CSL __ 10’-50’ in 5’ incre-ments

NOTES:1 Transformer, ballast sold separately.2 Transfomer included on 4620 unless 12V is speci-

fied.3 Separate ballast enclosure required, available on

4620 only.4 Requires GEB ballast.5 Not all distributions available with all lamp types,

use NR when not choosing LPI option.6 SF is available with 120V, 277V or 347V on HID

only.7 DF is available with 208V or 240V on HID only.8 Only available with metal halide lamps and MVOLT

voltage.9 Only valid with yoke mount.10 Not available with 20 CMT4 or 35CMT4 lamps.11 Only available with SP and MFL distributions.

4-1/4(108)

3(76)

5-1/8(131)

4-1/4(108)

7-1/16(180)

3(76)

Voltage

121

120208240277347

120/277MVOLT

TB

9(229)

2-9/16 (65) 3-3/4(96)

6(153)

4610 KM 4610 YM 4620 KM 4620 YM

5-1/8(131) 3

(76)

4-1/4(108)

3(76)

7-1/16(180)

5-1/4(133)

Lamp

LP Lamp installed

Accent Lighting

4529Head

4610, 4620Head

ou

tDo

or


ou

tDo

or

O32

lan

Dsc

aPe

liG

Hti

nG

Ordering Information Example: 4630 P3070CM 120 SP KM SSB IHL LPI BL

Finish

BL Black BZ Bronze DDB Dark bronze DNA Natural



Lamp

LPI Lamp included

Distribution4

NR No reflec-tor

SP Spot FL Flood

Product

4630


Consult factory

Lamp type

Incandescent1

P3075ICeramic

Metal halide2

P3035CMP3070CM20CMT435CMT470CMT4

Voltage

120208240277347480

120/277TB

MVOLT3

Mounting

KM Knuckle mount

YM Yoke mount

Options

Fusing SF Single

fuse5

DF Double fuse6


ballast7

Cord set length8

CSL __ 10’-50” in 5’ incre-ments

Intended Use

Landscape and architectural applications.

MaterialFixture, knuckle, yoke – die-cast, copper-free aluminum alloy A360. All materials are chem.-filmed or anod-ized prior to painting.

LampIncandescent: 150W max. HID: metal halide 150W max.

MountingKnuckle: 1/2:” NPT adjustable.

Yoke: minimum of 10 ft 18-3 STW cord. Cord length must be specified.



ListingsU.L., C.U.L., C.E., IP66, suitable for wet locations.

8-1/16(205) 5-1/4

(133)

4-1/4(108)

8-1/16(205)

5-1/4(133)

5-1/4(133)

4630 KM

Accessories

Internal IHL Internal honeycomb louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter redExternal GS Glare shield FGS Full glare shield FGS_ Full glare shield, 6” - 18” available in 2” increments

4630 YM

NOTES:1 Available in 120V only.2 Separate ballast enclosure required.3 Not all distribution available with all lamp

types.4 SF is available with 120V, 277V or 347V

on HID only.5 DF is available with 208V or 240V on HID

only.6 GEB default if MVOLT selected; only valid

with metal halide lamps.7 Only valid with yoke mount.8 Not available with IHL. 9 Not available with 50M, 70M, 100M 70S,

100S.

Accent Lighting

4630Head

ou

tDo

or


ou

tDo

or

O33

lan

Dsc

aPe liG

Htin

G

Intended Use

Landscape and architectural applications.

MaterialFixture, knuckle, yoke – die-cast, copper-free aluminum alloy A360. All materials are chem.-filmed or anod-ized prior to painting.

LampIncandescent: 150W max. HID: metal halide 150W max.

MountingKnuckle: 1/2:” NPT adjustable.

Yoke: minimum of 10 ft 18-3 STW cord. Cord length must be specified.



ListingsU.L., C.U.L., C.E., IP66, suitable for wet locations.

NOTES:1 Available in 120V only.2 Separate ballast enclosure required.3 Not all distribution available with all lamp

types.4 SF is available with 120V, 277V or 347V

on HID only.5 DF is available with 208V or 240V on HID

only.6 GEB default if MVOLT selected; only valid

with metal halide lamps.7 Only valid with yoke mount.8 Not available with IHL. 9 Not available with 50M, 70M, 100M 70S,

100S.

Ordering Information Example: 4640 P38150I 120 SP KM 4TRAS IHL GS LPI TVG

Ordering Information Example: 4640 22LED RED MVOLT WFL YM SMA12 FGS10 CSL10 LP BZ



Distribution3

NR No reflector SP Spot MFL Medium

flood FL Flood

Distribution

WFL Flood SP Spot MFL Medium flood LSD Linear Spread

Product

4640

Product

4640


Consult factoryQuartz1

150QIncandescent1

P38100IP38150ICeramic

Metal halide2

35CMT6 70CMT6

150CMT6

Voltage

120208240277347480

120/277TB

Voltage

MVOLT

Mounting

KM Knuckle mount

YM Yoke mount

Mounting

YM Yoke mount

Options

Fusing SF Single

fuse4

DF Double fuse5


ballast6

Mounting Options

JBA Aluminum J box JBB Bronze J box ARJB Architectural J box, aluminum SMSA_ 12” - 48” stanchion mount available in 6” increments PSSA Pedestal Stanchion mount WMC Wall mount cover WMA Wall mount with splice access TRA Tree mounted J box, aluminum TRB Tree mounted J box, bronze TRAS Tree mounted J box, aluminum with mount strap available with 1-4 J boxes per strap TRBS Tree mounted J box, bronze with mount strap available with 1-4 J boxes per strap

Accessories

Internal IHL9 Internal honey-

comb louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter redLSF Linear spread filterExternal GS Glare shield FGS Full glare shield FGS__ Full glare shield, 6” - 18” available in

2” increments

Accessories

Internal IHL Internal honey-

comb louverExternal GS Glare shield FGS Full glare shield FGS__ Full glare shield, 6” - 18” available

in 2” increments

Finish

Finish

Lamp

LPI Lamp included

Lamp

LPI Lamp included

Cord set length7

CSL __ 10’-50’ in 5’ incre-

ments

Cord set length7

CSL __ 10’-50’ in 5’ increments

4-3/4(121)

6-1/2(165)

9-3/8(237)

4640 KM

6-1/4(159)

6-1/2(165)

9-3/8(237)

4640 YM

Metal halide2

70M8 100M8

150M8

P3870MP38100MP38150M

High pressure sodium2

70S8

100S8

Lamp type

Lamp type

12LED22LED

LED color

RED Red GRN Green BLU Blue RBL Royal blue AMB Amber WMW Warm white CLW Cool white CLWHO Blue CYN Cyan

Accent Lighting

4640Head

ou

tDo

or


ou

tDo

or

O34

Finish2

VBL Black VBZ Bronze VGN Green VTVG Terra verde green VWH White

Product

4595459645974598

Lamp type

20QT3

Ordering Information Example: 4595 20QT3 12 JBA LPI VBL

Voltage

121

Intended Use

The graceful mushroom garden light is ideal for lighting flower beds, low planter areas, walkways and driveways, or any area where an unobstructed circular field of light is desired.

MaterialHeavy-gauge cast bronze body with spun copper canopy.

LampQuartz T3 20W max.

SocketG4 bi-pin

NOTES:1 Low-voltage transformer sold sepa-

rately.2 Vendor-supplied finish. Consult factory

for details.

lan

Dsc

aPe

liG

Hti

nG

17-5/8(448)

13-7/8(352)

10-3/4 (273)

17-5/8(448)

13-7/8(352)

8 (203)

17-3/4(451)

14(356)

14(356)

13-7/8(352)

8(203)

18-7/8(479)

45964595

45984597

Lamp

LPI Lamp included

LensGlass

Accessories

JBA J-box, aluminum JBB J-box, bronze

Border Floodighting

4595 4596 4597 4598

ou

tDo

or


ou

tDo

or

O35

X

3(76)

1/2” NPT Stem

4 -7/16(113)

4(102)

2-5/16 (59)

51(1295)

40(1016)

28(711)

97.5(2477)

4750 SERIES LINEAR FLUORESCENT

4752

4753

4754

4758

Intended Use

T5 and T5HO lamp performance, high output symmetrical and asymmetrical distributions and simple design, make the Hydrel 4750 Series ideal for spreading soft, even illumination along walls, signs and planters.

MaterialExtruded A360 aluminum with die-cast aluminum end caps. All fasteners are stainless steel.

LampFluorescent, single or multiple T5 and T5HO to 54W per lamp.

SocketG5 miniature bi-pin.

VoltageMulti-volt (120V-277V 50/60 Hz).

DistributionWall wash, narrow flood, medium flood, vertical flood and wide flood.

LensCurved high-strength, optical-grade clear acrylic.

MountingKM: knuckle mounted with two 1/2” NPT side mounting arms. AWM: adjustable wall mount with two side mounting brackets and minimum of

10 ft 18-3 STW (US) or 3M 3GX1.0mm HO7RN-F (IEC) flexible cord. Cord length must be specified.

AccessoriesExternal glare control available.

OptionsTamper-proof hardware and Polar Brite™ cold weather options available.

Accessories4

External

FSS4 Flush source shield

FVSR5 Full visor

HVSR5 Half visor

Internal

IDF Internal diffusion film

Lamp type

4752 14T5 T5 miniature bi-pin 2/14T5 Two T5 miniature bi-pin1

24T5HO T5 high output miniature bi-pin 2/24T5HO Two T5 high output miniature bi-pin1





4756 2/39T5HO Two T5 high output miniature bi-pin 4/39T5HO Four T5 high output miniature bi-pin4758 2/28T5 Two T5 miniature bi-pin 4/28T5 Four T5 miniature bi-pin1

2/54T5HO Two T5 high output miniature bi-pin 4/54T5HO Four T5 high output miniature bi-pin1

Finish

DBLB Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum,

textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured GN Green SND Sand TVG Terra verde green CF Custom

Product

47524753475447564758

Lamp

LPI Lamp included7

LP35K 3500°K lamp included

LP41K 4100°K lamp included

Voltage

MVOLT2

120277347

Distribution

WWD Wall wash VFL Vertical

flood NFL Narrow

flood MFL Medium

flood WFL Wide

flood3

Mounting

KM Knuckle mount

AWM Adjustable wall mount

Options

TPH Tamper-proof hardware PLPK Polar PackTM cold weather option 120

PLPKX Polar PackTM cold weather option 120 V PLPKZ Polar PackTM cold weather option 120-277 V PLPKY11 Polar PackTM cold weather option 347 V CW206,7 Cold weather ballast, -20F (-29 C)starting temp. (PLPK_ required for lamp to work optimally with CW20) ELN8,9,10 Emergency battery backup half output

Cord set length6

CSL__ 10’ - 50’ of cord, avail-able in 5’ increments

NOTES:1 Available with WFL distribution only.2 MVOLT multi-volt ballast range: 120V-

277V, 50/60Hz.3 WFL distribution only available with

multiple lamp options as specified with note 1.

4 Only available with NFL and MFL distribu-tions (standard on WWD version).

5 Accessory is mutually exclusive. Choose one only.

6 Only available with WWD and WFL distributions.

7 Only available with 54T5HO lamps.8 Only available with 4754, 4756, 4758.9 Only available with ELN.

Ordering Information Example: 4754 54T5HO MVOLT MFL KM WMP FSS LP30K DNAT

BallastElectronic multi-volt, 0° F (-18° C) minimum starting temperature.

ListingsU.L., C.U.L.

AWM

KM

Consult www.hydrel.com for details.

Mounting options

Consult factory.For runs or end-to-end mounting, see www.hydrel.com

Floo

DliG

Htin

G

10 Must choose 120 or 277 volts. MVOLT and 347 NOT available.

11 Not available with ELN or MVOLT.

Linear Floodighting

4750

ou

tDo

or


ou

tDo

or

O36

arc

Hit

ectu

ra

l in

-Gr

aD

e li

GH

tin

G

Intended Use

Hydrel’s Paradox Series sealed modular in-grade luminaires are multi-purpose units designed for up light-ing architectural and landscape features. These units can be flush mounted into a variety of substrates or landscape materials, and are ideal when aperture size or luminaire depth is a priority.

* Required categories

NOTES:1 Low voltage only available in 120V, 240V,

277V inputs. 2 Incandescent models are available with

120 Volt only.3 Available for low voltage lamps only.4 220 only available with 70CMT6 and

P3070CM.5 18TRT or 26TRT available with MVOLT

only.6 If GEB and an HID source is chosen, insert

MVOLT.7 Available with T4 G8.5 base, 20MH PJ5 base

and 20MH G46.5 base.8 Available with T6 and T4 lamps in NSP

distribution only. Not valid with WWD.9 Available only with WWD distributors

and18TRT, 26TRT, lamps.

Door MaterialDie cast bronze or stainless steel. Cool lens model includes die-cast brass extension for cool application.

HousingCompression molded polyester with patent pending internal direct access junction box for through-branch wiring. Internal junction box provides 44in3 volume to ensure proper seal during installation. The housing is U.V. stabilized, impact and corrosion resistant for use in all types of environ-ments. The housing has a sidecar con-figuration and houses the lamp and power module components as well as the lens/door finishing section.

Lamp TypeLow Voltage: MR11 GZ4 base, 35W max MR16 GX5.3 base, 75W max AR111 G53 base, 75W max

Incandescent: PAR20, PAR30, medium base HID: T-4 or T-6 bi-pin base, 75W max PAR-20 or PAR-30 medium base, 75W max Color Corrected Metal Halide Fluorescent: Triple tube CFL 4-pin base, 26W max

If a specific lamp is desired, specify manufacturer’s lamp number, most lamps can be supplied. LAMP INCLUDED.

VoltageSee ordering guide.

Light DistributionNarrow spot through wide flood avail-able. See ordering guide for complete list of distribution options.

Reflectors(Non-reflectorized lamps): High purity anodized specular or semi-specular materials in various distributions provide maximum performance and uniformity. Lamps can be aimed 15° from vertical and rotated 360°. All configurations available with Hydrel’s patented Aim-Lock® indexed and lock-ing components to allow relamping and maintenance without re-aiming.

Lens/SealTempered clear flat borosilicate glass. The patent pending door / lens seal uses proprietary knife edge technology to secure the assembly to the housing. Three captive screws hold the as-sembly in place. The lens is notched to provide maximum aperture opening.

Conduit EntriesTwo molded ¾” NPT side entries stan-dard, bottom hubs are molded with a ¾” NPT membrane knockout.

Accessories Decorative rock guard, internal glare control, anti-slip lenses, and color filter options available. See ordering guide for complete list of accessories.

Model*

PDX7PDX7CL

Conduit entry*

34S Two 3/4” NPT side (standard)

Light Distribution*

NSP Narrow spot SP Spot WFL Wide flood WWD7 Wall wash reflector, clear flat lens

Lamp*

LPI Lamp included

Options

Fusing SF17 Single fuse DF18 Double fuse Ballasting GEB General electronic ballast

Lens*

FLC Flat lens clear

FLCAS14 Flat lens clear, anti-slip

FLCSR14 Flat lens clear, slip resistant

Lamp type*

Low voltage1 M20 MR11 GZ4 base M35 MR11 GZ4 base M50 MR16 GX5.3 base M75 MR16 GX5.3 base P3650 PAR36, screw terminal base P3675 PAR36, screw terminal base AR11135 G3 base AR11150 G3 base AR11175 G3 base

Incandescent2 P2050I PAR20 med. base P3050I PAR30 med. base P2075I PAR30 med. base

HID 20MHCP10,12 PGJ5 base 20MHCG11,12 GU6.5 base 20MHCP12,13 PGJ5 base 35CMT612,13 T4 G8.5 base 70CMT612,13 T4 G8.5 base P2035CM PAR medium base P3035CM PAR medium base P3070CM PAR medium base R11135CM GX8.5 R11170CM GX8.5

Fluorescent5

18TRT 15 Triple tube GX24q2 base 26TRT 15 Triple tube GX24q3 base

Ordering Information Example: PDX7 B35CMT6 120 NSP FLC 345 R6 LPS SF

Accessories

Internal IHL16 Internal honey comb louver

ISS8 Internal source shield WWL9 Wall wash internal louver LSF Linear spread filter CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red External RG Decorative rock guard

Material*

SS Stainless steel BSS14 Brushed

stainless steel B Bronze

Voltage*

123 120208 2204 240 277 347

MVOLT6

10 Philips Mini MasterColor available in 20W and 120V only.

11 GE Mini UltraMax available in 20W and 120V only.

12 Available with electronic ballast only.13 20CMT4, 35CMT4, or 70CMT4 only valid

with MVOLT and GEB.14 Not available with decorative rock guard.15 Available only in MFL light distribution.16 IHL not available with color filters.17 SF only available with 120, 277 or 347 volts

HID. 18 DF only available with 208, 220 or 240 volts

HID.

Ballast

Integrally mounted modular ballast package, prewired with quick connectors for easy installation and maintenance. Ballasts are rated for low starting temperatures. High power factor magnetic ballasts standard, electronic ballasts also available.

FinishNatural bronze or stainless steel with a brushed finish. Bronze doors may be painted. Consult factory for color options.

ListingU.L., C.U.L.

Architectural Landscape Light

Paradox

ou

tDo

or


ou

tDo

or

O37

arcH

itectu

ra

l in-G

ra

De liG

Htin

G

Intended Use

Hydrel’s Paradox Series sealed modular in-grade luminaires are multi-purpose units designed for up light-ing architectural and landscape features. These units can be flush mounted into a variety of substrates or landscape materials, and are ideal when aperture size or luminaire depth is a priority.

Door MaterialDie cast bronze or stainless steel.

HousingCompression molded polyester with patent pending internal direct access junction box for through-branch wiring. Internal junction box provides 44in3 volume to ensure proper seal during installation. The housing is U.V. stabilized, impact and corrosion resistant for use in all types of environ-ments. The housing has a sidecar con-figuration and houses the lamp and power module components as well as the lens/ door finishing section.

Source TypeLED: Monochromatic LEDs, 12W. If a specific LED is desired, specify manu-facturer’s part number, most LEDs can be specified.

VoltageSee ordering guide.

Light DistributionSee ordering guide.

Lens/SealTempered clear flat borosilicate glass. The patent pending door / lens seal uses proprietary knife edge technology to secure the assembly to the housing. Three captive screws hold the as-sembly in place. The lens is notched to provide maximum aperture opening.

Conduit EntriesTwo molded ¾” NPT side entries stan-dard, bottom hubs are molded with a ¾” NPT membrane knockout.

Accessories Decorative rock guard, internal glare control, anti-slip lenses, and color filter options available. See ordering guide for complete list of accessories.

Power ModuleIntegrally mounted modular LED driver, prewired with quick connectors for easy installation and maintenance.

Finish

Natural bronze or stainless steel with a brushed finish. Bronze doors may be painted. Consult factory for color options.

ListingU.L., C.U.I.

Model*

PDX7Conduit entry*

34S Two 3/4” NPT side (standard)

Light distribution*

SP Spot specular reflector, clear flat lens

MFL Medium flood, clear flat lens

WFL Wide flood, clear flat lens

LSD Linear spread distribution

Lamp*

LPI LED array included

* Required categories.

Voltage*

MVOLT

LED color*

CLW Cool white CLWHO Cool white high output WMW Warm white AMB Amber BLU Blue CYN Cyan GRN Green RED Red RBL Royal blue

Lamp type*

12LED

Ordering Information Example: PDX7 B 12 LED CLW MVOLT SP FLC 345 IHL LPI

Accessories

Internal IHL Honeycomb louverExternal RG Decorative rock guard

Material*

SS Stainless steel BSS1 Brushed

stainless steel B Bronze

NOTES:1 Not available with decorative rock

guard.

15(38.1)

15(38.1)

15(38.1)

2627

4(10.2)

8(20.3)

8(22.9)

7(17.8)

10-1/2(26.7)

1-1/2(3.8)

8(20.3) 5

(12.7)

14(35.5)

14(35.5)

Lens*

FLC Flat lens clear

FLCAS1 Flat lens clear, anti-slip

FLCSR1 Flat lens clear, slip resistant

Architectural Landscape Light

ParadoxMonochromatic LED

ou

tDo

or


ou

tDo

or

O38

Model*

4426

Model*

4426

Mounting

NM Niche mounting

Mounting

NM Base mounting

Light distribution*

WFL Wide flood

Light distribution*

WFL Wide flood

Communication to fixture

DDX Direct DMX

Lens*

CLS Convex lens swim

Lens*


Voltage*

120

Voltage*

120

LED color*

RGB Mixing

LED color*

RGB Mixing CLW Cool white WMW Warm white AMB Amber BLU Cool white CYN Cyan GRN Green RBL Royal blue RED Red

LED type*

60LED 60 watts

LED type*

60LED 60 watts

Ordering Information Example: 4426 B 60LED RGB 120 WFL CLS NM 3DMX DDX CSL

Ordering Information Example: 4426 B 60LED RGB 120 WFL CLS NM CSL

Control

3-Channel 3DMX DMX5124-Channel 4DMX DMX512

Material*

B BronzeSWB Saltwater

bronze SS Stainless steel

Material*



un

Der

Wat

er l

iGH

tin

G

Fixture Housing and Door Heavy wall cast bronze construction. Natural cast bronze finish. Stainless steel bezel finish also available.

Niche Stainless steel with cast bronze mounting ring which locks the fixture into position. Niche has four ears to tie the forms or steel structures to struc-tural rods. Pressure grounding lugs on interior and exterior surfaces. Niche conduit entrances are 3/4” NPT.

LED Type Color Changing: 60 watt RGB LED array. (LED Board included.) Monochromatic: 60 watt monochro-matic LED array. (LED Board included.)

Intended Use

Designed to be recessed into a stainless steel niche as a wet niche type fixture. This175W metal halide fountainlight, the first HID underwater light in the industry, delivers the equivalent light output of a 1000W Quartz halogen lamp while consuming only one-fifth the power and attaining 2-1/2 times longer lamp life.

Control Color Changing: Standard DMX512. 3-channels per fixture. Red, Green, Blue or 4-channes per fixture Red, Green, Blue, and Intensity.

Communication to Fixture Color Changing: DMX512 direct.

Voltage 120VAC 60HZ only.

Lens 8-5/8” (219mm) diameter convex linear spread tempered glass.

Gasket Single piece molded U-shaped silicone gasket.

Cord Color Changing: Minimum of 10’ of # 16/3ST submersible rated cord for standard 120VAC line, minimum of 25’ of submersible rated data cord for DMX512 signal. Cord entrance is epoxy encapsulated. Cord length must be specified. NOTE: Sufficient cord should be coiled in the niche to allow for fixture to be removed and brought above water level for maintenance. Monochromatic: Minimum of 10’ of # 16/3ST submersible rated cord for standard 120VAC line. Cord entrance is epoxy encapsulated. Cord length must be specified. NOTE: Sufficient cord should be coiled in the niche to allow for fixture to be removed and brought above water level for maintenance.

Factory Leak Tested Fixtures are tested at 10PSI (0.70kg/ cm2) internal pressure while totally submerged in water.

Low Water Protection Temperature sensing low water cut off standard.

Fasteners Stainless steel.

Listing U.L

11-1/4”(286)

8-7/8”(225)

2”(50)

1-7/8”(50)

4-1/2”(113)

7-1/2”(190)

1”(25)

9”(229)1-3/8”

(35)

Niche

Direct DMX

Power


Swimming Pool

4426LED Wet Niche Monochromatic

4426 LED Wet Niche DMX Color Changing

Cord set length

CSL 35’-120’ of cord available in 5’ increments

Cord set length


ou

tDo

or


ou

tDo

or

O39

Model*

4426

Model*

4426

Mounting

BM Base mounting

Mounting

BM Base mounting

Light distribution*

SP Spot MFL Medium flood WFL Wide flood

Light distribution*

SP Spot MFL Medium flood WFL Wide flood

Communication to fixture

DDX Direct DMX

Lens*


Lens*

FLC Flat lens clear

Voltage*

120

Voltage*

120

LED color*

RGB Mixing

LED color*

RGB Mixing CLW Cool white WMW Warm white AMB Amber BLU Cool white CYN Cyan GRN Green RBL Royal blue RED Red

LED type*

60LED 60 watts

LED type*

60LED 60 watts

Ordering Information Example: 4426 B 60LED RGB 120 WFL CLS BM 3DMX DDX CSL

Ordering Information Example: 4426 B 60LED RGB 120 WFL CLS BM CSL

Control

3-Channel 3DMX DMX5124-Channel 4DMX DMX512

Cord set length


Cord set length


Material*



Material*



un

DerW

ater liGH

tinG

Fixture Housing Rock and Garden Base Heavy wall cast bronze construction. Natural cast bronze finish.

LED Type Color Changing: 60 watt RGB LED array. (LED Board included.) Monochromatic: 60 watt monochro-matic LED array. (LED Board included.)

Intended Use

Designed for fountains, reflecting pools and illuminating waterfalls. This175W metal halide fountainlight, the first HID underwater light in the industry, delivers the equivalent light output of a 1000W Quartz halogen lamp while consuming only one-fifth the power and attaining 2-1/2 times longer lamp life.

Control Color Changing: Standard DMX512. 3-channels per fixture. RED, Green, Blue or 4-channes per fixture Red, Green, Blue, and Intensity. Communication to Fixture Color Changing: DMX512 direct.

Voltage 120VAC 60HZ only.

Gasket Single piece molded U-shaped silicone

gasket.

Cord Color Changing: Minimum of 10’ of # 16/3ST submersible rated cord for standard 120VAC line, minimum of 25’ of submersible rated data cord for DMX512 signal. Cord entrance is epoxy encapsulated. Cord length must be specified. Monochromatic: Minimum of 10’ of # 16/3ST submersible rated cord for standard 120VAC line. Cord entrance is

epoxy encapsulated. Cord length must be specified.

Factory Leak Tested Fixtures are tested at 10PSI (0.70kg/ cm2) internal pressure while totally submerged in water.

Low Water Protection Temperature sensing low water cut off standard.

Fasteners Stainless steel.

Listing U.L

7-1/2”(190) 7-1/2”

(190)

15-1/2”(394)

3-1/2”(89) 5-7/8”

(149)5-5/8”(144)

11-1/2”(298)

7”(178)


Fountain and Swimming Pool

4426LED Base Mount Monochromatic

4426 LED Base Mount

DMX Color Changing

ou

tDo

or

area lighting flood lighting landscape · pdf file hospitality selection guide out d oor o2...

Documents