argus-2npx210r-v1

Upload: andreea-luca

Post on 02-Mar-2016

87 views

Category:

Documents


11 download

DESCRIPTION

Antenna Specification

TRANSCRIPT

  • PRODUCT SPECIFICATIONS2NPX210R-V11710 - 2170 MHz Dual Beam Remote Tilt Panel Antenna

    Last Modifi ed: 21/09/2011W: www.argusantennas.com E: [email protected] Technologies is continually improving products. Specifi cations may change at any time without notice.

    RF SPECIFICATIONS

    Frequency1710 - 2170 MHz

    1710 - 1920 MHz 1920 - 2170 MHzGain 18.2 dBi 19.2 dBiReturn Loss > 15 dBPolarization Dual Slant 45Horizontal Beamwidth 2 x 40 at 33 azimuth 2 x 34 at 29 azimuthVertical Beamwidth 7.6 6.8Vertical Pattern Nullfi ll YesElectrical Downtilt 0 - 10 continuous, beams independently adjustableUpper Sidelobe Level < -18 dBFront to Back Ratio > 30 dB typicalIsolation Between Ports-Polarizations > 22 dBIsolation Between Ports- Beams > 18 dBPower Rating 300WIntermodulation < -150 dBc (2 x 43 dBm)Impedance 50 ohmLightning Protection DC GroundedConnector Type 4 x 7-16 DIN femaleRET Type Internal motor & manual overrideRET Interface/ Connector AISG 2 remotely upgradeable/ Single AISG 8 pin male

    MECHANICAL DATA

    Antenna Dimensions 1330 x 370 x 120 mmPacked Dimensions 1445 x 400 x 216 mmAntenna Weight 18.5 kgRadome Material Polyester Fibreglass Pultrusion

    MAXIMUM ENVIRONMENTAL RATINGS

    Humidity 95% RH @ +30CLateral Loading (Front) 0.72 kN @ 160 km/hLateral Loading (Rear) 0.49 kN @ 160 km/hRain 140 mm per hourRated Wind Velocity 200 km/hTemperature -40C to +70C

    0 0

    -30

    -60-120

    -150

    180

    150

    12090

    60

    -30-20-10

    -90

    30

    Azimuth Beam 1 Azimuth Beam 2

    MOUNTING OPTIONS

    T-041-GL-E Adjustable ClampsF-042-GL-E Fixed Clamps

    0 0

    -30

    -60-120

    -150

    180

    150

    12090

    60

    -30-20-10

    -90

    30

    0 0

    -30

    -60-120

    -150

    180

    150

    12090

    60

    -30-20-10

    -90

    30

    Azimuth Superimposed

    0

    30

    6090

    120

    150

    180

    -150

    -120-90

    -60

    -30

    -30-20-10 0

    Elevation

    Note: Beam 1 controlled by Band 1 (RET) Beam 2 controlled by Band 2 (RET)

    PORT/ BEAM CONFIGURATION