arm - automatic river monitoring · the probe for the high turbidity (mod. at) using the method of...
TRANSCRIPT
Via del Seminario Maggiore, 35 - 85100 Potenza (PZ) - ItalyTel. (+39) 0971.21432 - [email protected] www.extratech.it
p.iva IT 018.762.207.63 01
ARM
Flow monitoring, suspended solids and water
quality of rivers, streams and channels
ARM is the first product of Extratech dedicated to remote monitoring of surface water and groundwater.
The combination of multiple sensors makes ARM a versatile monitoring system and extremely
configurable according to specific customer requirements.
With ARM you can handle both analog and digital sensors
and what makes this innovative system a useful garrison
and structural environmental safety, for example, you can
also check any rotations, movement or subsidence
of hydraulic infrastructures.
The measurement and monitoring kits can be fed from fixed
network to 230V or photovoltaic autonomous system (Optional)
for installation in the open field.
A modular and expandable hardware architecture makes ARM
a higher-level monitoring station with the best quality / price ratio
on the market.
ARM is controllable by the customer through a web platform and
also by smartphone through Android application. The measured
data is sent, via the integrated GPRS module, the web portal,
where the client can query the active monitoring system and
display measurements either in tabular format graph.
EXTRATECH... engineering measures
EXTRATECH... engineering measures
AR
M E
N V
er
1.0
0
Authorized dealer
Automatic River Monitoring
ARM
Flow monitoring, suspended solids and water
quality of rivers, streams and channels
Via del Seminario Maggiore, 35 - 85100 Potenza (PZ) - ItalyTel. (+39) 0971.21432 - [email protected] www.extratech.it
p.iva IT 018.762.207.6302
Turbidity probe for the measurement of suspended solids, available in a high or low turbidity version.
The probe for the high turbidity (mod. AT) using the method of the detection of the light reflected back by the
particles in suspension (back scattering). It is used an infrared light source so as to be independent of the
color of the sample. The light pulse, is sent through a lens in the sample, the light, reflected from the suspended
particles falls within the probe through a second lens and converted into a signal electric, according to the
concentration and the particle surface.
For measurement applications in clean water, or at least a little murky, it is recommended to use the BT version
This type of sensor uses the nephelometric method according to ISO 7027, and can be used for both
applications in the pipe and underwater. The turbidity measurement is carried out by the method of diffusion
light operated by suspended particles in the sample. A beam of light is sent into the sample through a window
transparent to the wavelength used. The proportion of light scattered with an angle of 90° from particles
suspended in the sample falls within the probe through a second optical window.
Turbidity sensor characteristics
Analogue output: 4 ... 20 mA
Digital output: RS485
Cable: 10 m (optional up to 100 m)
Dimensions: 165 mm x 60 mm (W x D)
Power supply: 9 ... 36 V DC
electrical load: 600 Ohm max 24 VDC
Degree of protection: IP 68
Temperature range: Operating -5 ... 50ºC
Maximum pressure: 1 bar at 25 ° C
Self-cleaning: compressed air (max 3 bar) opt.
mod. AT - High turbidity -
Measuring method: Back-Scattering
Measured units: FTU (Formazine Turbidity Unit)
Measuring range: 0-100, 0-1'000, 0-10'000 FTU
FTU sensitivity: 70/130%
Zero FTU: +/- 10 FTU
mod. BT - Low turbidity -
Measuring method: Nephelometric
Measured units: NTU (Nephelometric Turbidity Unit)
Measuring range: 0-40, 0-400, 0-4'000 NTU
NTU Sensitivity: 70/130%
FTU zero: +/- 0,400 NTU
rom pa
AR
M E
N V
er
1.0
0
EXTRATECH... engineering measures
EXTRATECH... engineering measures
Authorized dealer
Automatic River Monitoring
ARM
Flow monitoring, suspended solids and water
quality of rivers, streams and channels
Via del Seminario Maggiore, 35 - 85100 Potenza (PZ) - ItalyTel. (+39) 0971.21432 - [email protected] www.extratech.it
p.iva IT 018.762.207.63 03
DR sensor (Discharge Radar ) is designed for non-contact flow measurement, with radar technology.
The measurement of the flow is obtained by the combination of distance measurement of the speed of
superficial flow, with the principle of the Doppler frequency change and the measured level through the flight
times of the emitted signal. Via the management software, with which will fit the physical characteristics of the
section of the river bed or channel, the water flow is calculated in real time.
The absence of contact of the sensors with the water, minimizes the cleaning and maintenance operations,
and at the same time you avoid the possible damage that the materials transported by the flood could bring to
submerged probes.
DR Radar sensor for measuring the level, speed and water flow
Dimensions and weight: 338 x 333 x 154 mm ; 5,4 Kg
Power supply: 3 ...30 Vdc
Consumption at 12 V : 1 mA (stand-by); 140 mA (during measurement)
Degree of protection: IP67
Temperature range: Operative -35... +60ºC
Lightning protection: Integrated
Outputs: Digital SDI-12 e RS 485
n° 3 Analogue 4...20mA
Vertical angle automatic
compensation
Resolution: +/- 0,1°
Accuracy: +/- 1°
Level sensor features
Measurement principle: Doppler effect
Principle of detection: Radar signal at 26 Ghz
Measuring range: 0,00...15,00m (35,00 m on request)
Resolution: 1 mm
Accuracy: +/- 2 mm
Angle of aperture radar: 10°
Speed sensor features
Measurement principle: Return time TOF
Principle of detection: Radar signal at 24 Ghz
Measuring range: 0,10...15,00m/s
Resolution: 1 mm/s
Accuracy: +/- 0,01 m/s; +/- 1%
Angle of aperture radar: 12°
Flow direction: + / -
Measurement duration: 5...240 s
Interval between successive
measurements: 8s...5h
Distance water: 0,50...35m
Minimum wave height: 3mm
EXTRATECH... engineering measures
AR
M E
N V
er
1.0
0
EXTRATECH... engineering measures
Authorized dealer
Automatic River Monitoring
Flow monitoring, suspended solids and water
quality of rivers, streams and channels
ARM
Via del Seminario Maggiore, 35 - 85100 Potenza (PZ) - ItalyTel. (+39) 0971.21432 - [email protected] www.extratech.it
p.iva IT 018.762.207.63
The MP7 multiparameter probe allows you to measure up to seven parameters such as: temperature,
conductivity, pH, ORP, dissolved oxygen, level, turbidity (optional) specific ion (NH4 +, Cl- or others on
request) (optional)
The probe is suitable for numerous groundwater monitoring applications, landfills and treatment plants.
04
Technical specifications - MP7 - Multiparametric probe
Digital output: RS485 (ASCII)
Cable: 30 m
Dimension and weight: 510 mm x 70 mm (L x D), 2 kg
Power supply: 9...14 Vcc 60 mA
Housing: PVC
Maximum pressure: 35 bar
Connector: IP68
Temperature: -5...+55°C
Conducibility: 0...6 mS autorange - 0...60 mS
pH: 0...14
Redox: +/- 1100 mV
Dissolved oxygen: 0...200mmHg
0...200% air
0...20 ppm
0.20 mg/L
Level: 0...20 m or
0...350 m
Secondary parameters:
Pressure: 500...800 mmHg
Salinity: 0...60 ppm
RH: 0...100 %
Optional sensors:
Torbidity: 0...4000 NTU
Specific ions: NH4
+, Cl- or others on request
AR
M E
N V
er
1.0
0
EXTRATECH... engineering measures
EXTRATECH... engineering measures
Authorized dealer
Automatic River Monitoring