artis fa,fc (1)

System

AXIOM Artis FC/dFC/FA/dFA (e)Planning Guide Siemens e reproduction, tr

this document orrmitted without thority. Offendersmages. All right

eated by patent g a utility modelserved.

Print No.: AXA4-100.Replaces: AXA4-100.

nglishoc. Gen. D

05904433059044410741280707555373ansmission or use its contents is not

express written will be liable fors, including rightsrant or registration or design, are

2001

ate: 01.08Thofpeaudacrofre

891.01.06.02891.01.05.02

EDAXIOM Artis FC/FAAXSiemensLandgraf

2 Revision / Disclaimer

1Revision / Disclaimer

Document revision levelThe document corresponds to the version/revision level effective at the time of system delivery. Revisions to hardcopy documentation are not automatically distributed.Please contact your local Siemens office to order current revision levels.

DisclaimerThe installation and service of equipment described herein is to be performed by qualified personnel who are employed by Siemens or one of its affiliates or who are otherwise autho-rized by Siemens or one of its affiliates to provide such services.Assemblers and other persons who are not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service proce-dures.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 2 of 130

Table of Contents 3

0Table of Contents

1 _______ General Information______________________________________________ 6

System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Definition of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Abbreviations Used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Additional Information for Detailed Planning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 _______ Room Planning ________________________________________________ 10

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Product-specific Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Requirements for Lighting per DIN 6868-57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Room Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

System with DCS Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Top-down View of System without the MULTISPACE.F Option . . . . . . . . . . . . . . . . 12Top-down View of System with MULTISPACE.F Option . . . . . . . . . . . . . . . . . . . . . . 13

System with a second DCS Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Top-down View of System with a Second DCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Additional Work Positions with the MULTISPACE.F Option . . . . . . . . . . . . . . . . . . . 18System: DCS Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19System: Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Planning Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Movement Ranges of the Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Max. admissible Floor Unevenness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Floor Stand: Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Floor Stand: Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

with Image Intensifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Floor Stand: Top-down View of dFC/FC/FA/dFA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Patient table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Notes regarding the OR table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Positioning of Cabinets and Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Control Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Static Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Floor Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36DCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Patient table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3 _______ Installation Preparations_________________________________________ 40

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Required Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Floor Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 3 of 130

4 Table of ContentsPatient Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Injector Floor Outlet Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40DCS (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Control Room Distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41DVD Recorder + 17" Color Display (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Reference Display (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Second Data Display (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Control Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Lower Body Radiation Shield (Option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Upper Body Radiation Shield, Surgery Lamp, Injector (Option) . . . . . . . . . . . . . . . . 42Wireless Footswitch (Option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Component Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Floor Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Ceiling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

On-site Electrical Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Notes regarding the recommendations on the following pages for electrical installation in accordance with DIN VDE 0100-710 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Recommendation for Application Group 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Recommendation for Application Group 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58On-site Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Siemens Remote Services (SRS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65DICOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Injector Floor Outlet Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

The following manufacturers have been released: . . . . . . . . . . . . . . . . . . . . . . . . . . 67

4 _______ System Connections ____________________________________________ 69

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Overview of System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70List of Fixpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Maximum Fixpoint Distances and Planning Cable Channel Sizes . . . . . . . . . . . . . . 71List of Fixpoints Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Laying Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Calculating the Required Cable Channel Cross Section . . . . . . . . . . . . . . . . . . . . . . 75Remarks regarding Laying Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Control Room Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Image System in the Control Room (Standard). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Image System optionally in the Equipment Room. . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Room Light, Radiation Display, Door Contact, EPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

5 _______ Technical Data _________________________________________________ 82

Dimensions, Weights and Heat Dissipation,... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Examination Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Equipment Room. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Control Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Climatic Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 4 of 130

Table of Contents 5Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Paint Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Transport and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

6 _______ Transport and Storage Conditions_________________________________ 90

Packaging and Transport Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

7 _______ Detail Planning_________________________________________________ 91

Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91System Control Cabinets #1 / #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Image System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Floor Stand Ceiling Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Control Room Distributor (BTEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Control Consoles (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102Tabletop Opening for Control Modules and ECC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Second Data Display (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104Stationary Upper Body Radiation Shield, Surgery Lamp (Option) . . . . . . . . . . . . . . . . 105Movable Upper Body Radiation Shield, Surgery Lamp (Option) . . . . . . . . . . . . . . . . . 108

Control Console Cart Ceiling Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110System Ceiling Installation with Monitor Trolley Option . . . . . . . . . . . . . . . . . . . . . 111

Control Console Cart (option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Injector Wall Connection Box (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Planning Recommendation for the Injector Wall Connection . . . . . . . . . . . . . . . . . 118Injector Rack Mount Unit (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Connection of non-Siemens ECGs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121DCS Location per Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

System without the MULTISPACE.F Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122System Ceiling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Ceiling Installation with a second DCS (Option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1288 _______ Changes to Previous Version ____________________________________ 130Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 5 of 130

6 General Information

1- 1General InformationSystem Configuration 0This Planning Guide has been prepared for the AXIOM Artis dFC/FC/dFA/FA systems. This consists of: floor stand + patient table (4 different versions) + DCS or monitor trolley

Fig. 1: System configurationAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 6 of 130

General Information 7Notes 1.1

General Information 0 There must be a note referring to the installation and delivery conditions of the Med

group on all construction plans produced by the Planning Departments.The installation and delivery conditions must be enclosed with the plans when shipped.

The requirements of the relevant fire protection regulations must be observed for the premises.

The system was developed in accordance with IEC 60 601-1 The system does not meet the requirements for AP Classification. Use in areas with

explosive atmospheres as defined by IEC 610-1, Main Section 6, is not permitted. The AXIOM Artis OR patient table is splash-proof (IPX4 according to IEC 60 601-2-46). Unless otherwise stated, all dimensions in this document are in mm.

Definition of Terms 0Technically possible area, orientation points, etc. Technically possible area, minimum length, minimum width

The technically possible area is a rectangle formed by the required minimum length and width representing the space required for a system component. The following stipula-tions apply for the technically possible area: a) It is the smallest area that will not require limitations in device movements.b) Unless otherwise specified, the area may not fall below this value.c) It includes the necessary safety clearances (caution: national regulations may devi-

ate from this value);d) It includes the service areas for the unit;e) The required areas for unimpeded examination and operational processes, as well

as the footprint required for the control cabinets are not taken into account;f) Illustration: In the overhead views in this PG, the technically possible area is repre-

sented by a dot and dash line rectangle.

Fig. 2: Orientation points

Points belonging to system components to which reference is made to each other or to which reference is made in the room when positioning system parts. Illustration in the drawings:Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 7 of 130

8 General InformationFig. 3: Fixpoints

Clearly designated points on system components, installation ceiling, walls or floors at which cable outlets are located. Illustration in the drawings: circle with letter / number combination.

Fig. 4:The cable lengths determine the maximum fixpoint distances, and thus the maximum distances between the individual system components.

Room heightThe room height is the clear space measured from the top edge of the finished floor to the bottom edge of the ceiling substructure (bottom edge of the finished ceiling).

Left, right

Fig. 5: Definition of right, left ...

Abbreviations Used 0

Head side Foot side

Left side

Right side

Generator = Angio Generator M or POLYDOROS A100

Patient table = Represents all variants of the AXIOM Artis patient table

DCS = Display Ceiling Suspension

Display / TFT monitor = Flat screen

FD = Flat panel detector

DDIS = Data Display

EPS = Emergency Power SupplyAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 8 of 130

General Information 9Additional Information for Detailed Planning 0

PG: DCSAXA4-700.891.01...

PG: Klver Cooling UnitRA71-020.891.01...

Measuring station See the component PG PG: Siemens Remote Services (SRS)

TD00-000.891.01... PG: DICOM

TD00-000.891.02... PG: AXIOM Artis emergency power supplies

AXA4-770.891.02... PG: Ultrasound Integration

AXA4-810.891.01... PG: Multi-modality Viewing

AXA4-100.891.14... PG: Monitor Trolley with Display

AX00-000.891.01... PG: Voice Control

AXA4-100.891.15...Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 9 of 130

10 Room Planning

2- 2Room PlanningGeneral Information 0

Product-specific Information 0 Plan the control room at the foot end of the patient table (optimum visual contact to the

examination room). Plan the size and location of the radiation protective window so that the examination

room can be clearly viewed from the control room. Plan the entrance area as shown. Plan the equipment room to the left of the examination room. If possible, do not plan the generator and cooling unit in the examination room (because

of noise and heat generation). OR patient table (option)

When using the OR table for surgical interventions, plan an on-site UPS. For further info, see Room Planning > Patient Table

Requirements for Lighting per DIN 6868-57 0According to DIN 6868-57 (the international standard is still in preparation) the lighting in rooms where diagnosis is performed using image display devices (monitors) must meet the following requirements: Adjustable, glare-free and reproducible setting of lighting (e.g. dimmer with scale) No reflections from windows, lamps and viewing boxes when the monitors are in their

standard operating position.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 10 of 130

Room Planning 11Room Size 2.1

Recommendation 0

Fig. 6: Room PlanPos. 1 Cable cabinet (option)Pos. 2 SC1 and SC2 system control cabinetsPos. 3 GeneratorPos. 4 Cooling unitPos. 5 Examination roomPos. 6 DCS (Option)Pos. 7 Patient tablePos. 8 Equipment roomPos. 9 Floor standPos. 10 Control roomPos. 11 HardcopyPos. 12 Image systemPos. 13 Control consolePos. 14 Measuring station

*1 Image system in the control room (standard), optionally in the equipment room (must be stated in the order).

*2 2nd control cabinet (SC2) only with the OR patient tableSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 11 of 130

12 Room PlanningSystem with DCS Option 2.2Instead of the DCS, a monitor trolley can be used, see PG: Monitor Trolley with Display

Top-down View of System without the MULTISPACE.F Option 0

Fig. 7: Top-down view of system without the MULTISPACE.F optionPos. 1 Head-end/left position rotation range (motorized movement)Pos. 2 Floor stand in the left position.Pos. 3 Orientation point/isocenter for floor; stand in the head-end positionPos. 4 Isocenter in the left positionPos. 5 Orientation point / floor fixpoint; patient tableAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 12 of 130

Room Planning 13NOTE If the room size permits, the DCS should be shifted one ceil-ing grid to the left to enable unimpeded turning behind thetable.

Top-down View of System with MULTISPACE.F Option 0The minimum room width increases due to the two additional working positions (*1/Fig. 8 / p. 14).

*1 Dimensions without brackets Table rotation with the tabletop fully extended is not restricted.

Dimensions in brackets Table rotation with the tabletop fully extended is restricted.

*2 Dimensions without brackets for Peri, Tilt and OR tables (including 500 mm safety distance to the wall)

Dimensions in brackets for the basic tableSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 13 of 130

14 Room PlanningFig. 8: Top-down view of system with MULTISPACE.F optionPos. 1 Head-end/left position rotation range (motorized movement)Pos. 2 Floor stand in the left position.Pos. 3 Orientation point/isocenter for floor; stand in the head-end positionPos. 4 Isocenter in the left positionPos. 5 Orientation point / floor fixpoint; patient table

*1 Dimensions without brackets Table rotation with the tabletop fully extended is not restricted.

Dimensions in brackets Table rotation with the tabletop fully extended is restricted.

*2 Dimensions without brackets for Peri, Tilt and OR tables (including 500 mm safety distance to the wall)

Dimensions in brackets for the basic tableAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 14 of 130

Room Planning 15NOTE If the room size permits, the DCS should be shifted one ceil-ing grid to the left to enable unimpeded turning behind thetable. Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 15 of 130

16 Room PlanningSystem with a second DCS Option 2.3In addition to the existing DCS (1st DCS), in the future it will be possible to operate a sec-ond, optional DCS.Note the following for planning:

For new plan-ning:

The 1st DCS (max. 8 TFT monitors) should be planned longitudinally to the table.

The 2nd DCS (max. 3 TFT monitors) should be planned transversely to the table.

For a retrofit: The 1st DCS (max. 8 TFT monitors), if installed transversely to the table, should be planned longitudinally to the table.If already installed longitudinally, nothing changes.

The 2nd DCS (max. 3 TFT monitors) should be planned transversely to the table, as with new planning.

The following applies:

1. DCS longitudinally, 2nd DCS transversely to the table

Limitation for 2nd DCS:

A max. of only 3 monitors can be installed. Bypass images cannot be displayed and data display is not released. AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 16 of 130

Room Planning 17Top-down View of System with a Second DCS 2.4

Fig. 9: Top-down view of system with second DCSPos. 1 Cable fixpoint, 1st DCSPos. 2 Cable fixpoint, 2nd DCSPos. 3 Orientation point/isocenter for floor; stand in the head-end positionPos. 4 Isocenter in the left positionPos. 5 Orientation point / floor fixpoint; patient table

For ceiling installation with a second DCS, see Detail Planning > Ceiling Installation with a second DCS.

*1 Dimensions without brackets

Table rotation with the tabletop fully extended is not restricted.

Dimensions in brackets Table rotation with the tabletop fully extended is restricted.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 17 of 130

18 Room PlanningAdditional Work Positions with the MULTISPACE.F Option 0This option enables manual rotation of the floor stand around the axis of rotation (see below). For medical applications, there are two new work positions, the right position and OR position.The option can be retrofitted.

Fig. 10: Multispace.FPos. A System in the right positionPos. B System in the OR positionPos. 1 Floor stand rotation axis

*2 Dimensions without brackets

for Peri, Tilt and OR tables (including 500 mm safety dis-tance to the wall)

Dimensions in brackets for the basic tableAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 18 of 130

Room Planning 19System: DCS Positioning 2.5

Fig. 11: DCS positioningPos. A Version 1: Standard in combination with the MULTISPACE.F optionPos. B Version 2: only without the MULTISPACE.F option

Variant 1 (standard in conjunction with the MULTISPACE.F option): For the room plan, see Room Planning > System with the DCS Option. For ceiling installation, see Installation Preparations > Ceiling Installation.

Variant 2 (without MULTISPACE.F option only): For the room plan, see Detail Planning > DCS Positioning per Variant 2. For ceiling installation, see Detail Planning > System Ceiling Installation.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 19 of 130

20 Room PlanningSystem: Side View 2.6

Fig. 12: System side viewPos. 1 Max. unit height

*1 Orientation point/isocenter for floor stand in the head-end position

*2 Admissible room height: DCS 1/2/3: 2500-3100 mm DCS 4/6/7: 2900-3100 mm

D1 DCS (Option) (ceiling fixpoint)P1 Floor stand (ceiling fixpoint)T1 Patient table (floor fixpoint)AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 20 of 130

Room Planning 21Planning Notes 2.7

Movement Ranges of the Components 0When planning non-system components in the examination room, pay attention to the movement ranges of the system components (risk of collision!).

Fig. 13: Movement ranges of the componentsPos. 1 Floor stand movement rangePos. 2 DCS movement rangePos. 3 Patient table movement range (foot end)Pos. 4 Patient table movement range (head end)Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 21 of 130

22 Room PlanningNOTE If the room size permits, the DCS should be shifted one ceil-ing grid to the left to enable unimpeded turning behind thetable.

Max. admissible Floor Unevenness 0The maximum admissible floor unevenness of the base floor in the cross-hatched area is 8 mm.The cross-hatched area represents the rotation area of the stand and the movement range of the C-Arm.

Fig. 14: Max. admissible floor unevennessPos. 1 WallPos. 2 Orientation point/isocenter for floor stand in the head-end position

*1 The MULTISPACE.F option enables manual turning of the stand about rotation point A. Within the turning range, the stand can lock in at 6 increments; motorized device movements can then be performed as long as the distance to the wall is at least 500 mm. Entering the room size into the system configuration during system start-up ensures that motorized movements will be blocked if this minimum dis-tance is not met.The technically possible manual rotation range with the MULTISPACE.F option is +60/-220.With a specified room width of 5930 mm, the rotation range is limited by the room with to -110. For medical applications however, this is of no importance.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 22 of 130

Room Planning 23*1 In the specified room plan (Fig. 13 / p. 21), the dashed range is intersected by the wall. If the wall extends further to the left, the dashed range has to be taken into account accordingly. Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 23 of 130

24 Room PlanningFloor Stand: Side View 2.8

Fig. 15: Floor stand: side view / A: with 20 x 20 flat panel detector / B: with 30 x 40 flat panel detectorPos. 1 Floor stand in the head-end position.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 24 of 130

Room Planning 25Floor Stand: Side View 2.9

with Image Intensifier 0

Fig. 16: Floor stand: side view with image intensifierPos. 1 Floor stand in the head-end position

*1 190 - 425 mm with 40 cm I.I.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 25 of 130

26 Room PlanningFloor Stand: Top-down View of dFC/FC/FA/dFA 2.10

Fig. 17: Floor Stand: Top-down View / A: dFC/FC/FA / B: dFAPos. 1 Head-end/left position rotation range (motorized movement)Pos. 2 P1 cable fixpoint on the ceiling AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 26 of 130

Room Planning 27Pos. 3 Orientation point / isocenter, head-end positionPos. 4 Isocenter, left positionPos. 5 Rotation axes

For additional manual rotation range with the MULTISPACE.F option, see Room Planning > Planning Notes.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 27 of 130

28 Room PlanningPatient table 2.11

Versions 0There are 4 different versions of the Artis patient table that can be shipped:

1. Basic Table2. Peri table (like the basic table with additional motorized longitudinal movement of the

tabletop)3. Tilting table (like the Peri table with an additional tilting function in longitudinal direction)4. OR table (like the tilting table with an additional tilting function in transverse direction)The Artis patient tables all have the same exterior dimensions.

Notes regarding the OR table 0 An additional control cabinet (SC2) is shipped with the OR table. The cabinet primarily

contains the motor controller. Unlike other Artis patient tables, the motor controller can-not be installed in the table base, as this would limit the tilting and canting movement functions..

The OR table is splash-proof (IPX4 according to IEC 60 601-2-46). Use in the operating room

If the table is to be used for surgical interventions, according to IEC 60 601-2-46 it also has to be able to operate even in the event of a power failure. In this case, system con-trol cabinet SC1 has to be connected to an on-site uninterruptible power supply (UPS) . Since all system components, with the exception of the generator, are supplied power via the control cabinet, the units, image system, etc. remain operational even in the event of a power failure. For detailed information on the UPS, see PG Axiom Artis emergency power supplies, print no. AXA4-770.891.02...AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 28 of 130

Room Planning 29Views 0

Fig. 18: Views of patient table

1 = View x

2 = Card tabletop

3 = Basic table / Peri table (no tilting)Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 29 of 130

30 Room Planning*1 Power outlet (option)See the on-site electrical installation -> on-site power cables

*2 Panel for syringe connection

*3 Panel with nipple for compressed air connection

*4 Accessory rails

*5 Longitudinal table tilt (option)*6 Transverse table tilt (option)*7 Table Lift

*8 Longitudinal table movement

*9 Transverse table movement

*10 Table rotation range

T1 Patient table, floor fixpoint / orientation point / center of rotationAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 30 of 130

Room Planning 31Positioning of Cabinets and Components 2.12

Fig. 19: Arrangement of cabinets and components / A=recommendation 1, B=recommendation 2Pos. 1 Generator cabinetPos. 2 Cable cabinet (option)Pos. 3 System control cabinet #1Pos. 4 System control cabinet #2 (only with OR pat. table)Pos. 5 Cooling unit for tube unit

Recommendation 1:Generator (PU1), system control cabinets (SC1/SC2), and cooling unit (CU1) are in the equipment room (due to noise and heat generation).

Recommendation 2:Generator (PU1) and system control cabinets (SC1/SC2) are in the examination room, cooling unit (CU1) is in the equipment room.

NOTE Note the heat and noise generation of the generator (PU1).

Image system (IS):in the control room (standard). It may be placed in the equipment room only if specified in the order.

Take note of the heat dissipation and temperature ranges of the cabinets and compo-nents (see Chapter 5). If necessary, air condition the equipment room.

Systems with flat panel detector: The maximum permitted height difference between the detector and SC1 control cabinet is 10 m.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 31 of 130

32 Room Planning The cabinets can be set up as shown. The following must be observed:- The cabinets may only be positioned apart from one another or at a corner at the

locations indicated by the arrows. Here, take note of the System Connections Cable List > Overview of System Connections.

- When positioning at a corner, maintain a minimum 40 mm distance to the next cabi-net (necessary to open the cabinet doors).

- The PU1 and cable cabinet can also be positioned to the right of the SC1/SC2.- For additional information, see (Generator / p. 91) and Detail Planning (System Con-

trol Cabinets #1 / #2 / p. 94). Cable cabinet (option)

- The cable cabinet is required if excessive cable lengths cannot be housed in any other manner (e.g., under computer flooring). It has the same dimensions as the gen-erator cabinet. For cable routing from the top left/right, see (System Connections > Notes regarding Laying Cables) into the cabinet base from below and from all sides (except from the front) is possible.

- If you require a cable cabinet, mark it in the checklist sent to you by Logistics. The cable cabinet is provided free of charge. AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 32 of 130

Room Planning 33Control Room 2.13

Fig. 20: Control roomPos. 1 HardcopyPos. 2 Image systemPos. 3 System control consolePos. 4 Container (if applicable, obtain locally)Pos. 5 Measuring stationPos. 6 Option: Multi-Modality Viewing Container (not shown)

Plan the control room at the foot end of the examination room. Operating console and a second display (not shown; Detail Planning > Second Data

Display (Option). Control modules (option), ECC (option)

- The control modules for the floor stand, collimator, and patient table are not suited for freestanding installation. The modules have to be left in the console. The cutout is to be created on-site by a cabinet maker with a router (for details see Detailed Planning > Tabletop cutout for control modules and ECC)

- An emergency Stop button is shipped in conjunction with the control modules (not with the ECC). It has to be installed within reach of the operator.

Position components near the control room distributor (see (System Connections) (Control Room Details).

Plan the image system in the control room (standard).It may be placed in the equipment room only if specified in the order.

For the Multi Modality Viewing Container (option), see PG AXA4-100.891.14...Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 33 of 130

34 Room PlanningFig. 21: Control roomPos. 1 17" color display for DVD recorderPos. 2 Remote Power Archive Unit (RPAU)Pos. 3 System Live displayPos. 4 Reference displayPos. 5 Emergency Stop SwitchPos. 6 Image systemPos. 7 UPSPos. 8 Control room distributorPos. 9 2nd footswitchPos. 10 DVD recorderPos. 11 Container (obtain locally)Pos. 12 Control consolePos. 13 Keyboard + mousePos. 14 Control modulesPos. 15 ECCAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 34 of 130

Room Planning 35For control room distributor details, see Detail Planning > (Control Room Distributor (BTEE) / p. 101).

*1 Option

*2 Image system in the control room = standard, optionally in the equipment room; must be stated in the order; for details see Detail Planning > Image System.

*3 Plan the UPS (option) for the image system in the immediate proximity of the image system. A minimum distance of 25 mm on all sides is required for air circulation.

*4 The RPAU is required if the image system is set up outside the control room.

*5 Emergency Stop SwitchSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 35 of 130

36 Room PlanningStatic Requirements 2.14

Floor Stand 0

Fig. 22: Floor stand installation platePos. A Installation plate

Numbered holes 1-7 for installation directly on the floor; other holes are spare holes.

This maximum value does not occur simultaneously at all mounting points. The tensile forces depend on the working position and system movement.The installation plate is anchored in the reinforced concrete with 7 Hilti heavy-duty anchors bolts.Minimum concrete quality: C20/25

Max. tensile force:

F1-F7 3.9 kNAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 36 of 130

Room Planning 37Floor Stand Center of Gravity

Fig. 23: Floor stand center of gravityPos. A Installation plate

Point load (stand + installation plate) = 6.6 kN

DCS 0Vertical ceiling load, Fymax:

*1 Range of point load center of gravity from head (N) in the Peri position (P).*2 Additional point load movement range with the MULTISPACE.F option (option can

be retrofitted)*3 Orientation point/isocenter for floor stand in the head-end positionSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 37 of 130

38 Room Planning Max. 5.4 kN per attachment point( = 2 screws; the screws can be under differing loads, max. 4.2 kN)The dynamic load is exerted on each attachment point, since it is a single moving load.

For additional information see PG AXA4-700.891.01...

Patient table 0The maximum extraction forces occur with rotated table (+/- 45) with fully extended table-top at the head-end. The maximum extraction forces were determined with a patient weight of 250 kg and table accessories weighing 40 kg.The installation plate is anchored in the reinforced concrete with 4 Hilti heavy-duty anchors.Minimum concrete quality: C20/25Foot end load per attachment point: Max. tensile force: 4.5 kN

NOTE With the basic table, the max. admissible patient weight is250 kg. With the other tables, it is 200 kg.

Center of gravity of the patient tableThe movement of the center of gravity during the rotation of the table was determined under the following conditions: Tabletop completely extended at the head-end. Tabletop extended to the right to the end-stop. Tabletop not tilted. Tabletop loaded with a patient weight of 250 kg. Table accessories weighing 40 kg hooked into the right accessory rail.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 38 of 130

Room Planning 39Fig. 24: Center of gravity of the patient table

1 = Movement of center of gravity

2 = Center of gravity with table rotated 120

3 = Orientation point / center of rotation

4 = Center of gravity with table rotated -120

5 = Center of gravity with table in 0 position

*1 A point load of max. 8 kN is exerted on the center of gravitySiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 39 of 130

40 Installation Preparations

3- 3Installation PreparationsGeneral Information 0

Required Aids 0 Transport castor set, Part No. 11 53 654

If the system is installed outside of Europe, the transport castor set, if not already avail-able, must be ordered in advance.

Installation template, Part No. 65 72 627 G144Efor aligning the installation plates of the floor stand and patient table- Within Europe, the template can be borrowed from the Hegele Company.

Contact: Tel.: +49 / (0)9191-72 05 610e-mail: [email protected]

Spacer gauge, Part No. 70 004 422 X2278,to set the correct distance of the DCS longitudinal rails

Floor Stand 0 The pre-installation parts are part of the pre-installation shipment. The pre-installation parts include the installation plate, along with the installation materi-

als and the ceiling outlet (Detail Planning > Floor Stand Ceiling Outlet). Preinstallation in Computer Flooring

Recommendation: Floor stand installation plate on filled concrete or on the on-site sub-structure.

Patient Table 0 The pre-installation parts are part of the pre-installation shipment. The pre-installation parts include the installation plate and the mounting materials. Preinstallation in computer flooring

Recommendation: Floor stand installation plate on filled concrete or on the on-site sub-structure.

Panels are present on the foot end of the table for (see Room Planning > Views)- Syringe connection- Compressed air connection- Power outlet (option)

Injector Floor Outlet Option 0 see Installation Preparations > Injector Floor Outlet OptionAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 40 of 130

Installation Preparations 41DCS (Option) 0 The pre-installation parts are part of the pre-installation shipment. The pre-installation parts include the longitudinal rails and the installation materials. Transverse mounted ceiling profiles (installation ceiling) are the prerequisite for install-

ing the DCS longitudinal rails. Grid spacing for ceiling mounting is max. 675 mm.

Control Room Distributor 0 The control room distributor is positioned in the control room, either under the operat-

ing console (option) or on the wall. For details, see Detail Planning > Control Room Dis-tributor (BTEE).

If available, plan the second footswitch and/or control modules (floor stand, patient table) in the control room such that, when activated, visual and acoustic contact is maintained with personnel, the patient, and the injector.

DVD Recorder + 17" Color Display (Option) 0 When setting up the DVD recorder, make sure there is good ventilation. The clear

space to walls from stationary fixtures or other components must be at least 3 cm.

Reference Display (Option) 0 Located in the DCS (standard) and also possibly in the control room (Room Planning >

Control Room).

Second Data Display (Option) 0 Positioned in the control room or examination room on the wall or on a console. For details, see Detail Planning > Second Data Display (Option).

Control Cabinets 0 For floor and wall anchoring as well as cable routing, see Detail Planning >

(Generator / p. 91) and (System Control Cabinets #1 / #2 / p. 94). Store excess cable lengths in the cable cabinet (option), under computer flooring or in

cable ducts, etc. (System Connections > Notes regarding Laying Cables).

Cooling System 0 For additional information, see the Klver Cooling Unit PG, RA71-020.891.01...Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 41 of 130

42 Installation PreparationsLower Body Radiation Shield (Option) 0 The lower body radiation shield is installed on the left or the right of the table.

Upper Body Radiation Shield, Surgery Lamp, Injector (Option) 01. Overview

2. Upper Body Radiation Shield 2 versions can be shipped:

- Upper body radiation shield with fixed installation- Movable upper body radiation shield

All mounting parts are included in the shipment. For ordering, see the applicable SIR PM.

3. Surgery Lamp (Option) For electrical connection, see Installation Preparations > On-site Power Cable

4. Injector (Option) There are three ways to install the injector rack mount unit. For details, see Detail Plan-

ning > Injector Rack Mount Unit (Option).

Wireless Footswitch (Option) 0The "wireless footswitch" is comprised of the following components: Footswitch

Released Accessories

Ceiling column with fixed installation(For Dimensional Drawing, see Detail Planning> Fixed Upper Body Radiation Shield, Surgery Lamp; for posi-tioning, see Installation Preparations > DCS Version 1 with Fixed Upper Body Radiation Shield (Option), Detail Planning > Ceiling Installation with Fixed Upper Body Radiation Shield (Option))

Upper body radiation shield or injector stand

orUpper body radiation shield and surgery light

or

Ceiling column installed on a carriage(For Dimensional Drawing, see Detail Planning > Mov-able Upper Body Radiation Shield, Surgery Lamp (Option); for positioning, see Installation Preparations > Ceiling Installation, Detail Planning > System Ceiling Installation)

Upper body radiation shield and/or sur-gery light

Second carriage for injector stand pos-sible (separate Part No.)AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 42 of 130

Installation Preparations 43 Charging unit for footswitch, consisting of: Wall holder for charging cable (7 m);Plug-in power supply with cable (2 m).Notes for Planning:

Plan the wall holder in proximity of the patient table in the examination room (max. 5 m from the patient table).Attach with screws/anchors or with (adhesive) Velcro tape.All mounting hardware is included in the shipment.

Weight of wall holder: < 1 kg. Power consumption: < 10 W. Power outlet for the charging unit (no fuse protection in the Siemens system).

The outlet always must be live to charge the footswitch battery overnight. Wall holders and footswitches may not be installed or used in the control room.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 43 of 130

44 Installation PreparationsComponent Installation 3.1

Floor Mounting 0

Floor Stand/Patient TableThe two installation plates for the stand and the patient table must be installed on solid sur-face with sufficient load capacity. Cut out the existing floor covering. If applicable, material that is not capable of handling the load capacity in the area of the installation plates must be replaced with filled concrete. Hilti heavy-duty anchors are included for installation of the installation plates: Longer heavy-duty anchor bolts are available from the Hilti Company on request. If needed, the installation plates can also be secured through the ceiling of the room

below using M12 threaded rods, min. hardness rating 8.8 according to the ISO Norm (obtain the threaded rods, etc. on site).

Fig. 25: Floor stand/patient tablePos. 1 Floor stand support base platePos. 2 Floor stand installation platePos. 3 Orientation point/isocenter for floor stand in the head-end positionPos. 4 Patient table installation platePos. 5 Patient table orientation point

*1 Patient table cable lead-in: with installation directly on solid concrete, lead in the cables through a break in

the ceiling from the room below (see Installation Preparations > Patient Table). with installation on filled concrete, through a cable channel (see Installation

Preparations > Patient Table).AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 44 of 130

Installation Preparations 45Installation directly on Solid Concrete

Floor Stand

Fig. 26: Floor standPos. 1 Mounting points for floor standPos. 2 Orientation point/isocenter for floor stand in the head-end positionPos. 3 Insulation partsSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 45 of 130

46 Installation PreparationsPos. 4 Solid concretePos. 5 Installation platePos. 6 Support base platePos. 7 Insulation plate

Installation plate with 13 holes ( 25 mm): Anchored directly in the concrete with 7 Hilti HSL-3 M12/50 anchors; 7 evenly distrib-

uted holes should be used (see Room Planning > Static Requirements). No more than two holes may remain open between the attachment points.

Patient Table

*1 Hilti HSL-3 M12/50 anchors (7 included in the shipment)*2 Floor anchoring with threaded rods through the ceiling possible (threaded rods must

be purchased locally)AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 46 of 130

Installation Preparations 47Fig. 27: Patient tablePos. 1 Head endPos. 2 Installation platePos. 3 Solid concrete

Insulation parts (insulation plate, etc.) not shown.

*1 Anchored with 4 Hilti HSL-3 M12/25 anchors

*2 Area for cable inlet in table base

*3 Opening in the installation plate

*4 Cable lead-in through ceiling opening from the room below

*5 Patient table orientation pointSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 47 of 130

48 Installation PreparationsInstallation on Filled Concrete

Floor StandAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 48 of 130

Installation Preparations 49Fig. 28: Floor standPos. 1 Mounting points for floor standPos. 2 Size of the concrete fillingPos. 3 Orientation point/isocenter for floor stand in the head-end positionPos. 4 Insulation partsPos. 5 Installation platePos. 6 Support base platePos. 7 Insulation platePos. 8 Solid concrete

Installation plate with 13 holes ( 25 mm): Anchored on filled concrete with 7 Hilti HSL-3-G M12/100 anchors; 7 even-distributed

holes should be used (see Room Planning > Static Requirements). No more than two holes may remain open between two attachment points.*1 Hilti HSL-3-G M12/100 anchors (7 included in the shipment)*2 Floor anchoring with threaded rods through the ceiling possible (threaded rods must

be purchased locally)Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 49 of 130

50 Installation PreparationsPatient Table

Fig. 29: Floor standPos. 1 Cable duct, e.g. 200 x 70 mmPos. 2 Head endPos. 3 Area of the concrete fillingPos. 4 Self-leveling groutPos. 5 InsulationPos. 6 Filled concretePos. 7 Installation platePos. 8 Solid concreteAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 50 of 130

Installation Preparations 51Insulation parts (insulation plate, etc.) not shown.

Ceiling Installation 0

DCS Version 1 with Movable Upper Body Radiation Shield (Option)Recommended ceiling grid: 675 mm

*1 Anchored with 4 Hilti HSL-3 M12/100 anchors

*2 Area for cable inlet in table base; cable routing via cable duct or opening in ceiling from room below.When routing via cable duct: To ensure the cable is not bent severely at the table inlet, plan only cable ducts with a minimum height of 70 mm.

*3 Opening in the installation plate

*4 Patient table orientation pointSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 51 of 130

52 Installation PreparationsAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 52 of 130

Installation Preparations 53Fig. 30: DCS version 1 with movable upper body radiation shield (option)Pos. 1 Grid spacingPos. 2 Do not plan any lighting components, ventilation outlets, sprinkler elements, etc. between the ceiling rails.Pos. 3 Radiation shieldPos. 4 DCS

NOTE If the room depth permits it, the DCS should be moved oneceiling grid to the left to make unrestricted pivoting behindthe table possible.

DCS Version 1 with Fixed Upper Body Radiation Shield (Option)Not recommended in conjunction with the MULTISPACE.F option


*2 Floor stand ceiling outlet (see Detail Planning > Floor Stand Ceiling Outlet)*3 DCS ceiling outlet

*4 observe the maximum admissible rail overhang.

*5 The ceiling rails (option) for the radiation shield, surgery lamp, injector stand (see Detail Planning > Movable Upper Body Radiation Shield, Surgery Lamp (option)); length when shipped: 4 m, can be shortened.

IN1 Injector stand installed on the injector ceiling column in the radiation shield rails (option).

SU Surgery lamp (option), (see Installation Preparations > On-site Power Cables, Detail Planning > Movable Upper Body Radiation Shield, Surgery Lamp (Option).

TR1 Control console cart (option) (see Detail Planning > Control Console Cart (Option))Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 53 of 130

54 Installation PreparationsAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 54 of 130

Installation Preparations 55Fig. 31: DCS version 1 with fixed upper body radiation shield (option)Pos. 1 Do not plan any lighting components, ventilation outlets, sprinkler elements, etc. between the ceiling rails.Pos. 2 Radiation shield installation platePos. 3 DCS

NOTE If the room depth permits it, the DCS should be moved oneceiling grid to the left to make unrestricted pivoting behindthe table possible.


*2 Floor stand ceiling outlet (see Detail Planning > Floor Stand Ceiling Outlet)*3 DCS ceiling outlet

*4 Installation plate (option, see Detail Planning > Fixed Upper Body Radiation Shield, Surgery Lamp (Option)) for Radiation Shield and Surgery Lamp or Injector Stand

*5 With a smaller ceiling grid, move the installation plate to the side until it is centered to the ceiling grid.

IN2 Injector head with fixed installation on the ceiling (option)SU Surgery lamp (option) (see Installation Preparations > On-site Power Cables,

Detail Planning > Fixed Upper Body Radiation Shield, Surgery Lamp (Option)).TR1 Control Console Cart (option)Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 55 of 130

56 Installation PreparationsOn-site Electrical Installation 3.2 The detailed regulations regarding electrical installations must be observed.

In Germany, the most important standards used are in the series VDE 0100 and VDE 0100-710; in other countries, the applicable national regulations.

For power line connection voltages, see (Electrical Data / p. 87).

Notes regarding the recommendations on the following pages for electrical instal-lation in accordance with DIN VDE 0100-710 0

RCD Ground Fault Circuit Interrupters Only use ground fault circuit interrupters for alternating and pulsed DC fault currents,

with no surge current, with IN = 30 mA. An RCD ground fault circuit interrupter cannot be used in power networks without an N

cable. RCD ground fault circuit interrupter for system control cabinet (SC1):

IN = 40 A/ I = 30 mA RCD ground fault circuit interrupter for generator: According to DIN EN 50178 clas-

sification VDE 0160, "Ausrstung von Starkstromanlagen mit elektronischen Betrieb-smitteln" (Equipping of high-voltage systems with electrical resources), the following FI circuit breakers are to be used exclusively.

Line voltage RCD Pre-fusing

for UN = 3 400/415 V: IN = 63AI = 30 mAPurchased via electrical wholesaler:Order no. 5SM3 346-4 allstrom

Purchased via SPH (Med depart-ment: Part no. 49 54 470 Y7933(Width of the RCD ground fault cir-cuit interrupter is 72 mm = 4TE, mounting on a standard rail)

63 A slow-blow

for UN greater than 3 415 V:

UN = 500VIN = 125AI = 30 mAPurchased via SPH (Med depart-ment):Part no. 51 41,168 Y7933

63 A slow-blowAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 56 of 130

Installation Preparations 57On/Off switch (with pilot light)Provide an on-off switch for the system. Preferably, this on/off switch should be located in the equipment room (if configured). The installation height is 180cm.

Emergency Off switch (with lock)For fast system shutdown in hazardous situations, at least one emergency off switch (with lock) is to be provided in the examination room, control room, and equipment room. It should be positioned 1.8 m high is such a way that it is easy to reach but without the pos-sibility of accidental activation.

Recommendation for Application Group 1 0Electrical installation on site per DIN VDE 0100-710

Fig. 32: Electrical installation: Recommendation application group 1

A = Suggestion for room distributor

B = Power supply cable for X-ray

C = 5x according to calculation

1 Potential ground wire to external conductive parts

2 Power cable to fixed or movable equipmentSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 57 of 130

58 Installation PreparationsNOTE The short circuit pre-fusing values apply to the SIEMENSground fault circuit interrupters only

NOTE If using a system UPS, the specifications in the EmergencyPower Supply PG must be observed for the emergency OFFcircuit.

Recommendation for Application Group 2 0Electrical installation on site per DIN VDE 0100-710

3 Power cable to fixed or movable equipment, e.g., developer machine

4 Ground Fault Circuit Interrupter

4a Ground fault circuit interrupter for system control cabinet

4b Ground fault circuit interrupter for generator

5 System breaker

6 Isolation transformer with overload monitoring conforming to DIN VDE 0100-710, Section 710.512.1.6.2 (output power 3.15 - 8 kVA, isolation test volt-age 4 kV).

7 For MMV connection, see PG: AXA4-100.891.14... (option)EAT On/Off switch with pilot lamp for X-ray system

AT1 Emergency off button in examination room

AT2 Emergency off button in control room

AT3 Emergency off button in equipment room[] Figures are free cable lengths in m

*1 Surgery light connection (115 V or 230 V ) (option), see Installation Prepa-rations > On-site Electrical Installation > On-site Power Cables.

*2 Table outlet connection (option), see Installation Preparations > On-site Elec-trical Installation > On-site Power Cables > Table Outlet.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 58 of 130

Installation Preparations 59Fig. 33: Electrical installation: Recommendation for Application Group 2Pos. 1 Power supplyPos. 2 Suggestion for room distributorPos. 3 Emergency Power Supply SVPos. 4 Second cablePos. 5 First cablePos. 6 Power supply cable for X-rayPos. 7 5x per the calculation

*1 Surgery light connection (115 V or 230 V ) (option), see Installation Preparations > On-site Elec-trical Installation > On-site Power Cables.

*2 Table outlet connection (option), see Installation Preparations > On-site Electrical Installation > On-site Power Cables > Table Outlet.

*3 Required only for the CATHCOR (not for Sensis).

1 Voltage monitoring and switching device according to VDE 0100-710

2 Isolation transformer with overload monitoring conforming to DIN VDE 0100-710, Section 710.512.1.6.2 (output power 3.15 - 8 kVA, isolation test voltage 4 kV).

3 Isolation monitoring deviceSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 59 of 130

60 Installation PreparationsNOTE The short circuit pre-fusing values apply to the SIEMENSground fault circuit interrupters only

NOTE If using a system UPS, the specifications in the EmergencyPower Supply PG must be observed for the emergency OFFcircuit.

On-site Power Cables 0A maximum of four on-site power cables are required: Power cables to the system control cabinet (SC1)

- Power cable, 5x 16 mm2.- The connection terminals are designed for a maximum of 16 mm2.

4 Report and test combination

5 Potential ground wire to external conductive parts

6 Power cable to fixed or movable equipment

7 Power to fixed or movable equipment, e.g., developer machine

8 Ground Fault Circuit Interrupter

8a Ground fault interrupter switch for the system control cabinet, see the note (Installation Preparations > On-site Electrical Installation)

8b Ground fault interrupter switch for the generator, see the note (Instal-lation Preparations > On-site Electrical Installation)

8c Pre-fusing for the generator, see (Installation Preparations > On-site Electrical Installation)

9 System breaker

10 4-socket connection strip for AXIOM Sensis (option)11 Gnd pin socket

12 For the MMV connection, see PG: AXA4-100.891.14... (option)EAT On/Off switch with pilot lamp for X-ray system

AT1 Emergency off button in examination room

AT2 Emergency off button in control room

AT3 Emergency off button in equipment room

D1 ECG display option in DCS[] Figures are free cable lengths in mAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 60 of 130

Installation Preparations 61 Generator Power Cable (PU1)- Power cable 5x per the calculation. Here, take note of the internal line resistance:a) Measure the internal power line resistance, Ri, at the sub-distributor with an internal

line resistance meter.b) Size the power cable so that the max. admissible Rimax (see table) is not exceeded.

Measured internal power line resistance plus resistance of the power cable Rimax.

* Resistance value in Ohm at UN, -15%** Resistance value in Ohm at UN, -10%

Resistance values in Ohms at UN, +/- 10%- Maximum power output for the generator (Angio Generator M or POLYDOROS

100A) is 100 kW. With a larger internal line resistance than is listed in the above table for 100 kW, the generator power is automatically reduced.For the X-ray tubes currently being shipped, a max. generator power of 80 kW is suf-ficient.

- Minimum Ri: 0.02 Ohm- Max. cable cross section that can be connected: 70 mm2.

Angio Generator MUN P

100 kW 80 kW

400 V* 0.10 Ohm 0.14 Ohm415 V** 0.14 Ohm 0.17 Ohm440 V** 0.16 Ohm 0.21 Ohm480 V** 0.20 Ohm 0.27 Ohm

POLYDOROS A100UN P

100 kW 80 kW

380 V 0.08 Ohm 0.10 Ohm400 V 0.09 Ohm 0.11 Ohm420 V 0.09 Ohm 0.12 Ohm440 V 0.10 Ohm 0.14 Ohm480 V 0.12 Ohm 0.16 OhmSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 61 of 130

62 Installation Preparations Connecting the Surgery Lamp (Option)

Fig. 34: Connecting the surgery lamp (option) Pos. 1 Room distributorPos. 2 Surgery lamp, 1 bulbPos. 3 Surgery lamp, 3 bulbs

Surgery lamp: (1 bulb) Power consumption 50 W can be connected to 115 V or 230 V (inter-

nal transformer)

Surgery lamp: (3 bulbs) Power consumption 160 W can be connected to 115 V to 247 V

(external transformer)AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 62 of 130

Installation Preparations 63If necessary, obtain all cables, switches, and relays locally.

Table Power Outlet (Option)An optional power outlet is available for the patient table.

- If the power outlet was ordered, it has already been installed in the table at the fac-tory.

- All patient tables are shipped ex factory with the 2 x 1.5 mm2 power cable pulled in.

Connecting the Table Power Outlet: in examination rooms according to application group 1 with MMV:

Power supply to the table power outlet via MMV or an external isolation transformer with overload monitoring (see (Recommendation for Application Group 1 / p. 57)).

in examination rooms according to application group 1 without MMV:Power supply to the table power outlet via an external isolation transformer with over-load monitoring (Recommendation for Application Group 1 / p. 57).

in examination rooms according to application group 2:Regardless of whether an MMV is configured, the connection to the hospital backup power supply is provided via an isolation transformer with isolation monitoring in accor-dance with EC 60364-7-710, Section 710.413.1.5 (output power 3.15 - 8 kVA, isolation test voltage 4 kV). Secondary fusing of the outlet at 115 V: 5 A, for 230 V: 2.5 A(Recom-mendation for Application Group 2 / p. 58)

*1 For the connection to line voltage, see Installation Preparations > (Recommendation for Application Group 1 / p. 57), Installation Preparations > (Recommendation for Application Group 2 / p. 58), *1

*2 The light can be connected: directly or via a wall switch (*2a), an additional footswitch, Part No. 17 41 313 (*2b), via the potential-free contact of the Z58/M102to the line voltage. The surgery light is switched on and off with fluoro / exposure via the potential-free contact of the Z58/M102.

*3 The three-bulb surgery lamp (option) operates via an external transformer. The trans-former (dimensions L 280 x W 200 x H 160 mm; weight approx. 8 kg) should be installed near the SC1.

*4 For systems shipped prior to 6/2005, the K4 relay must be planned on site, e.g. in the room distributor.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 63 of 130

64 Installation PreparationsSiemens Remote Services (SRS) 3.3For detailed information on SIEMENS Remote Services (SRS), see PG TD00-000.891.01... (on the Intranet under: CS/ForService/ProductInformation/Siemens Remote ServiceAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 64 of 130

Installation Preparations 65Network 3.4The image system is equipped with a network card for Fast Ethernet (100 Base T).Network connection with system switch (in delivery volume)

Fig. 35: NetworkSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 65 of 130

66 Installation PreparationsDICOM 3.5For detailed information on DICOM, see PG TD00-000.891.02...Can be found on the Intranet under: CS/ForService/ProductInformation/Planning/Gen-eral...AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 66 of 130

Installation Preparations 67Injector Floor Outlet Option 3.6

Fig. 36: Injector floor outlet (option)Pos. 1 Patient table installation platePos. 2 Table longitudinal axisPos. 3 Area in which the outlet is installed. The outlet must be planned centered to the table longitudinal axis.Pos. 4 Head end

NOTE An injector cable may not be pulled through the table base.It is absolutely necessary to route the injector cable via thefloor outlet.

The following manufacturers have been released: 0Medrad:Josh Sevick (Cardiovascular Product Manager)Medrad Inc.One Medrad DriveIndianola, PA [email protected] AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 67 of 130

68 Installation PreparationsTyco:Pat DyerSite Planning Dept.2111 E. Galbraith Rd.Cincinnati, Ohio [email protected]+1 (513) 761-2700 ext.5721Detailed information on planning / project planning can be obtained from the addresses indicated

Fig. 37: Medrad floor outletAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 68 of 130

System Connections 69

4- 4System ConnectionsGeneral Information 0 All system-specific cables (including the protective conductor) are included in the ship-

ment. The system cables consist of standard cables and cable wiring harnesses of a fixed

length. They may not be shortened. Excessive cable lengths can be stored in the cable cabinet (option), cable ducts, under

computer floors, etc. Notes regarding on-site electrical installation are included (Recommendation for Appli-

cation Group 1).Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 69 of 130

70 System ConnectionsOverview of System Connections 4.1

Fig. 38: Overview of system connectionsPos. 1 Ethernet

Notes: RV = Room Distributor The room distributor and the power cables are not included in the shipment. The illustration includes the cable cabinet (option).

The wiring harnesses can also be laid to the fixpoints directly, i.e., without routing them through the cable cabinet. The excess cable lengths must then be stored in another way (in cable conduits, under computer flooring, etc.).

The option "monitor trolley (fixpoint D2)" is not shown. For a definition of the fixpoints, see the System Connections > List of Fixpoints.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 70 of 130

System Connections 71List of Fixpoints 4.2

Maximum Fixpoint Distances and Planning Cable Channel Sizes 0

Wiring Harness No.

From fix-point

To fix-point

Cable channel cross-section in mm2

Con-duit, clear space in inches

Mini-mum open-ing in mm

Maximum fix-point dis-tance in m

Comment

1 P1 PU1 780 2 32 162a P1 PU1 500 3 42 16 High-voltage cables2b P1 PU1 500 3 42 16 High-voltage cables3 P1 SC1 3125 3 70 x 50 15 min. bending radius:

80 mm

4 P1 CU1 2000 2,5 50 30 min. bending radius: 50 mm

5 SC1 CR1 780 3 60 x 35 19 for control room options (control mod-ules, footswitches, dis-play, ECG).

6 SC1 CR1 780 3 55 x 55 19

7 SC1 T1 3125 3 80 x 55 14 skipped with OR tables

8 SC1 SC2 780 2 50 x 25 2

only with OR tables9a SC2 T1 3125 3 80 x 55 14

9b SC2 T1 3125 3 80 x 55 14

10 SC1 CU1 780 2 35 3011 SC1 PU1 780 2 35 x 35 5

12 SC1 IS 780 3 55 x 35 19

13a SC1 D1 780 3 50 x 40 19DCS (Option)

13b IS D1 780 2,5 40 x 25 19

14a SC1 D12 780 3 50 x 40 192. DCS (Option)

14b IS D12 780 2,5 40 x 25 19

15 SC1 D2 780 2,5 40 x 25 19 Monitor Trolley (Option) *16 IS D2 780 2,5 40 x 25 19Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 71 of 130

72 System Connections17a IS CR1 780 3 50 x 25 19only if the image sys-tem is located outside of the control room.

17b IS CR1 780 2 25 1917c IS CR1 780 2 25 1917d IS CR1 780 2 35 x 15 19

18 SC1 TR1 780 3 60 x 35 16 Control Console Cart (Option) **

19 IS Ethernet cable (thick wire or twisted pair) Ethernet connection (option), on-site cable19a CR1 Net-

work socket Ethernet cable (included in shipment)

see Installation Prepa-rations > Network; 5 m and 30 m included in shipment

20 SC1 IW 780 3 60 x 35 19 Injector wall connec-tion (option)21 SC1 IW 780 3 55 x 55 19

22 CR1 Dis-play

290 2 30 x 20 8 Second display (option)

23 CR2 D1 150 2,5 40 x 40 27 Measuring station (option)

24 CR2 SC1 100 3 70 x 17 27 Measuring station (option)

25 CR2 T1 120 2 45 x 15 27 Measuring station (option)

T1 CR1 Ultrasound Integra-tion option; for details, see the Ultrasound PG.

RV PU1 Power cable Generator (Power Unit 1) -> Installation Preparations > Recommendation for Application Group

1

On-site cables

RV SC1 Power cable System control cabinet -> Installation Preparations > Recommendation for Application Group

1

On-site cables

RV SU Power cable Surgery Lamp (Option) -> Installation Preparations > Recommendation for Application Group

1

On-site cables

Wiring Harness No.

From fix-point

To fix-point





CommentAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 72 of 130

System Connections 73List of Fixpoints Used 0

with-out the MMVRV

with-out the

MMVT1

125 1/2 10 28 Table power outlet option, see Installation Preparations > Rec-ommendation for Application Group 1; Installation Prepara-tions > Recommenda-tion for Application Group 2; Installation Preparations > On-site Power Cables

with the

MMVMMV

with the

MMVT1

125 1/2 10 28

Wiring Harness No.

From fix-point

To fix-point





Comment

* 6 m from the ceiling outlet to the monitor cart

** 6 m from the ceiling outlet to the control console cart

Fixpoint Subsystem Comment

CR1 Control room (X-ray control room) Fixpoint on the bottom of the control room distributor

CR2 Measuring station (control room, E-medicine) (option)

Floor fixpoint

CU1 Cooling unit for X-ray tube unit cooling (Cooling Unit 1)

Floor fixpoint

D1, D12 DCS (Option) Ceiling fixpointD2 Monitor Trolley (Option) Ceiling fixpointIN1 Injector head on the injector ceiling column in the

radiation shield support arm system (option)Ceiling fixpoint

IN2 Injector head with stationary installation on the ceil-ing (option)

Ceiling fixpoint

IS Image System Floor/wall fixpoint

IW Injector wall connection in the examination room (option)(Injector Wall Outlet)

Wall fixpointSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 73 of 130

74 System ConnectionsP1 Floor stand (Plane 1) Ceiling fixpointSC1 System control cabinet #1 (system control) Floor fixpointSC2 System control cabinet #2 (only with the Axiom

Artis OR patient table)Floor fixpoint

PU1 Generator #1 (Power Unit #1) Floor fixpointSU Surgery lamp (option) Ceiling fixpointT1 Patient table (Table) Floor fixpointTR1 Control console cart (trolley) (option) Ceiling fixpoint)

Fixpoint Subsystem CommentAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 74 of 130

System Connections 75Laying Cables 4.3Notes: Lay cables/wiring harnesses separately in conduits or in closed cable channels. If laying in open cable channels, lay cables separately using metal dividers or a similar

device. The cable channel depth should be at least 70 mm; if there are cross-overs, it may be

necessary to provide for greater depth.

Calculating the Required Cable Channel Cross Section 0The total of the cross sections of the cables/wiring harnesses present should apply for all cable channel/conduit cross sections. The individual cross sections can be taken from the cable list. The required fill factor are already included in this. If excess cable lengths are to be stored in the cable channels, this must be taken into account when sizing.

Remarks regarding Laying Cables 0

Laying excess cable lengths: in the cable cabinet (option; service friendly) in cable channels (take note of accessibility) in ceiling/wall boxes (take note of accessibility) under computer flooring (service friendly)The following must be observed:Cable coils are not allowed!Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 75 of 130

76 System ConnectionsFig. 41: Routing excess cable length in the false floorPos. 1 Meander cable in false floor

Fig. 39: Routing excess cable length in the cable cabinetPos. 1 Meander cable in cable cabinet

Fig. 40: Routing excess cable length in the cable duct

Pos. 1 Meander cable in cable ductAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 76 of 130

System Connections 77Control Room Details 4.4

Image System in the Control Room (Standard) 0

Fig. 42: Optional image system in the control room (standard)Pos. 1 DisplayPos. 2 KeyboardPos. 3 MousePos. 4 Ref. displayPos. 5 HandswitchPos. 6 Control modulesPos. 7 ECCPos. 8 Emergency stopPos. 9 FootswitchPos. 10 DVD recorderPos. 11 Image system in the control roomPos. 12 Control room distributorSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 77 of 130

78 System ConnectionsImage System optionally in the Equipment Room 0If the image system is located in the equipment room, the video cables to the monitor, etc. are routed via the control room distributor.

* Video cables

** Monochrome or color displays can be shipped.

Type of Display max. distance to image system in m

17 color display 7,5

18 color display 3,5

18 monochrome display 3,5AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 78 of 130

System Connections 79Fig. 43: Image system in the control roomPos. 1 Remote Power and Archive UnitPos. 2 DisplayPos. 3 KeyboardPos. 4 MousePos. 5 Ref. displayPos. 6 HandswitchPos. 7 Control modulesPos. 8 ECCPos. 9 Emergency stopPos. 10 FootswitchPos. 11 DVD recorderPos. 12 Control room distributor

* Monochrome or color displays can be shipped.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 79 of 130

80 System ConnectionsRoom Light, Radiation Display, Door Contact, EPS 4.5For room light control, etc., only use flexible cables within the control cabinet (SC1).

Fig. 44: Room Light, Radiation Display, Door Contact, EPSPos. 1 System control cabinetPos. 2 Room lightPos. 3 External radiation displayPos. 4 Potential-free door contact (24 VDC / 20 mA) *1, door closed = contact closedPos. 5 Potential-free contact for EPS (24 VDC / 20 mA) *3, emergency power "on" = contact closedAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 80 of 130

System Connections 81*1 If needed, a switch to block radiation can be installed in series with the door con-tact. The switch (24 VDC / 20 mA) must be provided on site. Control using +24 V from the system control cabinet Plan the switch so that unintentional operation is not possible. The switch must be provided with an appropriate symbol (or designation) from

which the function can be recognized.

*2 If the 2 A current load is insufficient, plan an external power relay through which the room light can be switched on and off.

*3 When emergency power is "on", exposure mode is blocked and only emergency fluoroscopy is possible.

*4 With systems shipped prior to 6/2005, the k4/K5 relays must be provided on site. Control of the relay is with 24 V DC (max. 0.2 A). A free-wheeling diode must be circuited over the relay coil.

SC1 Fixpoint system control cabinetSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 81 of 130

82 Technical Data

5- 5Technical DataDimensions, Weights and Heat Dissipation,... 0

Examination Room 0

Fixpoint Sub-system Dimensions (W x D x H)

[mm]

Weight [kg]

Heat Dissipa-tion [kW]

D1 DCS (Option) see the DCS PGD2 Monitor carriage with display (option) see the PGP1 Floor stand (with installation plate)

Installation platesee Room Plan-

ning > Floor Stand: Side ViewSee Installation Preparations >

Installation directly on Solid

Concrete

< 665approx. 45

0,2n.a.

T1

Patient table (incl. installation plate, 22 kg and table accessories, 40 kg):Basic tablePeri tableTilt tableOR table

see Room Plan-ning > Views

452482530550

0,20,20,20,1

TR1 Control console cart See Detail Plan-ning > Control Console Cart

(Option).

approx. 26

n.a.

SU Fixed upper body radiation shield, surgery lamp (option)

See Detail Planning > Fixed Upper Body Radiation Shield, Surgery Lamp

(Option)

n.a.

SU Movable Upper Body Radiation Shield, Surgery Lamp (Option)

See Detail Planning > Mov-able Upper Body Radiation

Shield, Surgery Lamp (Option)

n.a.

IW Injector Wall Connection Box (Option) 324 x 102 x 257 approx. 5

n.a.AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 82 of 130

Technical Data 83Equipment Room 0

Control Room 0

Fixpoint Sub-system Dimensions (W x D x H) [mm]

Weight [kg]

Heat Dissipation [kW]

CU1 Cooling Unit (Cooling Unit 1) 479 x 398 x 481 42 2,4

SC1

System Control Cabinet #1:System with image intensifierSystems with Flat Panel Detec-tor

600 x 434 x 2202 235270

0,9max. 1.6

SC2 System Control Cabinet #2 (only with the OR table)

600 x 434 x 2202 125 0,2

PU1 Angio Generator M 800 x 434 x 2202 350 1,0

PU1 Polydoros A100 800 x 434 x 2202 300 1,0

n.a. Cable cabinet (option) 800 x 434 x 2202 120 n.a.


Weight [kg]

Heat Dissipation [kW]

IS Image system 689 x 800 x 720 87 0,7

n.a. UPS for Image System (Option) 170 x 439 x 216 19 0,03n.a. Remote Power Archive Unit (only

when image system is in equipment room)

216 x 368 x 222 9 < 0,1

CR1 Control Room Distributor 1054 x 207 x 409 29 0,1

n.a. Keyboard 447 x 157 x 20/55 < 1 0,1

n.a. 17" display or 17 color displayor 18 color displayor 18 monochrome display

413 x 230 x 413413 x 230 x 413413 x 230 x 413413 x 230 x 413

9,09,09,09,8

< 0,07< 0,07< 0,07< 0,07

n.a. DVD Recorder 214 x 365 x 102 4,6 0,1

n.a. 17" Color Display for DVD Recorder (Option)

413 x 230 x 413 9,0 < 0,07

n.a. Second Examination Control Con-sole (ECC) (Option)

370 x 225 x 70/90 approx. 3 n.a.

n.a. Patient Table Control Console (Option)

91 x 161 x 65/85 < 1 n.a.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 83 of 130

84 Technical DataFloor stand control console in the col-limator control console (option)

216 x 161 x 65/85 < 2 n.a.

n.a. Control console (option)(height adjustable from 705 to 730 mm)

1392 x 800 x 720 approx. 60

n.a.

D1 Second Data Display (Option) See Detail Planning > Second Data Dis-

play (Option).

9 n.a.


Weight [kg]

Heat Dissipation [kW]AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 84 of 130

Technical Data 85Climatic Conditions 5.1

NOTE Observe the limited temperature range in the examinationroom as well as in the equipment room (SC1 system controlcabinet) with the systems with the flat panel detector (see *2).

Examination and control room

Temperature range:

Relative humidity:

10 C... 35C*1 (recommended tempera-ture 22 C)15 C... 30 C *2

20-75% without condensation

Image System (IS) Temperature range:Relative humidity:Max. temperature gradient:Air flow rate:Max. noise level:

10 C... 35 C20-75% without condensation10 C/h657 m3/h50 dB(A)

Angio Generator M or POLYDOROS A100 (PU1)

Temperature range:Relative humidity:Max. temperature gradient:Air flow rate:Max. noise level:

10 C... 35 C20-75% without condensation5 C/h160 m3/h55 dB(A)

System control cabinet #1 (SC1)

Temperature range:

Relative humidity:Max. temperature gradient:Air flow rate:Max. noise level:

10 C... 35 C*1

15 C... 30 C *2

20-75% without condensation5 C/h500 m3/h48 dB(A)

System control cabinet #2 (SC2)

Temperature range:Relative humidity:Max. temperature gradient:Air flow rate:Max. noise level:

10 C... 35 C20-75% without condensation5 C/hn.a.

n.a.Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 85 of 130

86 Technical DataCooling unit (CU1)(for Megalix X-ray tube)

Cooling air:Air flow:Max. noise level:

5 C... 30 C (frost-free room)1100 m3/h55 dB(A) at 50 Hz, 59 dB(A) at 60 Hz

Stand with flat detector Max. temperature gradient:Barometric pressure:Mechanical impact:Vibrations:

5 C/h70 kPa... 104 kPamax. 10 g/ 16 msmax. 0.1 g/ 10-200 Hz

*1: System with image intensifier

*2: Systems with Flat Panel DetectorAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 86 of 130

Technical Data 87Electrical Data 5.2

NOTE If using on-site voltage stabilization, contact Customer Solu-tions.

Nominal connec-tion volt-age * [V] +/- 10%

Frequency [Hz] +/- 1 Hz

Internal fusing [A]

Exter-nal fus-ing [A]

Max. power con-sump-tion [kVA]

Connection value ** [kVA]

Angio Generator M(shipped until

09/2005)(Power Unit PU1)

3 ph. 400 50/60

63 ***

18 for fluo-roscopy 160 for

exposure

43,6

3 ph. 415 50 45,3

3 ph. 440 50/60 48,0

3 ph. 480 60 52,4

POLYDOROS A100(Power Unit PU1)

3 ph. 380

50/60 5063A

slow-blow

8 for fluo-roscopy160 for

exposure

32,9

3 ph. 400 34,6

3 ph. 420 36,4

3 ph. 440 38,1

3 ph. 480 41,6

System control cabi-net

(System Control SC1)

3 ph. 380 50/60

35

50

slow-blow

8,5

23,0

3 ph. 400 50/60 24,2

3 ph. 440 50/60 26,7

3 ph. 480 60 29,1

* Max. permissible voltage between phases (L1, L2, L3) and Gnd: 300 V** The connection value is calculated using the following formula:

Connection value = 3 x nominal connection voltage x internal fusing*** Depends on the type of ground fault interrupter, see Installation Prep-

arations > On-site Electrical InstallationSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 87 of 130

88 Technical DataPaint Information 5.3

Primary color Medical White, C610

Combination Color Medical Blue, C750AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 88 of 130

Technical Data 89Transport and Storage 5.4

System

Temperature range: -20 C ... 60 C

Relative humidity: 10 % ... 95% without condensation

Barometric pressure: 50 kPa ... 106 kPa

Mechanical shocks max. 10 g/ 16 msmax. 25 g/ 6 ms (in original packaging)

Vibrations max. 2 g/ 58-150 Hzmax. 10 g/ 58-150 Hz (in original packaging)Siemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 89 of 130

90 Transport and Storage Conditions

6- 6Transport and Storage ConditionsPackaging and Transport Routes 0

Largest crate with packaging, weight dFC/FC/FA W 2760 x D 1020 x H 2090 mm, approx. 1200 kg

dFA W 2800 x D 950 x H 2020 mm, approx. 1200 kg

Largest single part with transport car-riage (min. door opening), weight

dFC/FC/FA W 2500 x D 820 x H 1900 mm, approx. 760 kg

dFA W 2620 x D 820 x H 1880 mm, approx. 760 kgAXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 90 of 130

Detail Planning 91

7- 7Detail PlanningGenerator 0

Fig. 45: GeneratorSiemens AXA4-100.891.01.06.02 AXIOM Artis FC/FA01.08 CS CD AX

Page 91 of 130

92 Detail PlanningA = Front View

B = Side View

C = Top-down view

1 = Exhaust air

2 = Cabinet base

3 = Air intake

4 = For service

5 = Cabinet doors, removable

*1 Removable base panels on all sides.

*2 Distance to wall is not required.

*3 When setting up across from one another, the min. distance to the cable cabinet is 40 mm (required to open the cabinet doors).

*4 Wall mounting is required, because the assemblies can be pivoted out. Secure the cabinet to the wall with wall anchors and the supplied brackets. Obtain anchors locally.If needed, the cabinet can also be secured to the floor with anchors (see next page).AXIOM Artis FC/FA AXA4-100.891.01.06.02 Siemens01.08 CS CD AX

Page 92 of 130

Detail Plan

artis fa,fc (1)

Documents

dcs option

view of system

injector option

siemens axa4

cooling system

system configuration

color display option

reference display option