artisan resin panels...t: 212.206.1730 | f: 212.206.1736 | [email protected] | archsystems.com...

CO

LL

EC

TIO

N D

ET

AIL

S

T: 212.206.1730 | F: 212.206.1736 | [email protected] | ARCHSYSTEMS.COM

Artisan Resin PanelsThe desire for handcrafted and specialty materials is realized in the 4' X 8' Artisan Resin Panels. A mix of organic compounds and polymers create a compelling offering of 10 styles with a naturally inviting effect. Hand painted on MDF with a high gloss clear epoxy resin finish makes this novelty wall surface durable and easy to maintain.

SPECIFICATIONS

SIZE: 48" x 96"THICKNESS: 10mmCONSTRUCTION: MDF core/balanced backBACKING: MDF Metal BalancedFINISH: High gloss clear epoxy resinMATERIAL: Hand crafted and applied acrylic resin • Custom color capabilities and additional backing options; contact [email protected]• Please note that variations in color and texture may occur due to the nature of the material

View collection web page for the complete offering including additional product options, corresponding Spec ID# and updates.

SPAVE003Shiroi

SPAVE005Guriddo

SPAVE002Kasshoko

SPAVE001Gin

SPAVE006Patān

SPAVE004Kate

SPAVE008Buronzu

SPAVE007Kumo

SPAVE010Tora No Me

SPAVE009Buru


CO

LL

EC

TIO

ND

ET

AIL

SINSTALLATION METHODPRE-INSTALLATION INSTRUCTIONSEXAMINATION

• Examine surfaces to receive Artisan Resin Panels• Verify surfaces to support Artisan Resin Panels are clean, dry, flat, plumb, level, square, stable,

rigid, and capable of supporting the weight• Notify architect of conditions that would adversely affect installation or subsequent use• Do not begin surface preparation or installation until unacceptable conditions are corrected

PREPARATION• Protection of In-Place Conditions: Protect adjacent surfaces and areas from contact with

installation materials• Surface Preparation:

STEP 1:Prepare surfaces in accordance with manufacturer's instructions.

STEP 2: Remove dirt, dust, debris, oil, grease, curing agents, bond breakers, paint, coatings, and other surface contaminants which could adversely affect installation of Artisan Resin Panels.

STEP 3:Remove laitance and loosely adhering concrete.

STEP 4:Repair defects, damage, and cracks in accordance with manufacturer's instructions.

STEP 5:Provide dry, sound, and uniform surface suitable for installation of Artisan Resin Panels.

HANDLING INSTRUCTIONS• Two people must carry panel.• Each person should have one hand underneath bottom side of panel while the other hand

holds the side.• Always ensure stone panel is carried maintaining an angle no greater than 90° with stone

facing upwards (as they would sit on an A-Frame). The backing supports the weight of thestone, and the stone should never face downward. DO NOT CARRY PANEL FLATHORIZONTAL TO GROUND.

• If the panels are shipped flat, lift from two corners while slowly bringing up to a standingposition while ensuring the center of the panels are stable and controlled. Never lift the panelsout of a crate from the center.

• When picking up panels, it is helpful to use a couple blocks of wood to set the panel on. Thiswill protect the corners while allowing room to lift up when moving.

• If storing panels long term on A-Frame, place a piece of plywood behind the stone panels toprevent bowing. Clipping the panels to the plywood adds more safety from any bowing

• All panels must be stored indoors in a controlled climate at all times. Extreme temperaturechanges will warp and bow the panels. If panelds do bow or wardp, lay flat with sandbags ontop for several days until bowing comes out. Once you install the panels, always use a bracesystem to ensure the panels are tight up against the substrate and allow for the panels toadhere to the substrate flat. This will also take out any slight bowing that naturally occurs insome stones.

ASI will not be responsible for any damages to panels due to mishandling of our products. If you have concerns or questions, please reach out to [email protected] or 212-206-1730 before handling.


CO

LL

EC

TIO

ND

ET

AIL

S

PRECAUTIONS

• Please lay flat for storage. Store the material between 15-30°C in a dry indoor area. Prolongedstorage is not recommended.

• Please do not put excessive weight on the product to avoid cracking.• Please do not use rollers or very hard objects in installation of the product to avoid scratching.• Inspect goods carefully. No returns on cut goods.• Confirm that you have the correct color and product before installing.• No claims allowed for labor charges or consequential damages under any conditions.• Panels can display certain irregularities that are inherent to the manufacturing process.• Do not crease panels.• Do not rub face of the product with a stiff brush.• Do not overbook the material.• Avoid direct or bright sunlight. Not guaranteed against fading or color change.

INSTALLATION METHOD, CONT.


INSTALLATION INSTRUCTIONSTOOLS:• Diamond tools: Rail saw, coring bit, drum wheel,

angle grinder, polishing pads, hot glue gun• DOW Great Stuff Pro Wall and Floor Spray Foam

Adhesive• Titebond Subfloor Adhesive or equivalent• Custom building products: Polyurethane silicone/

adhesive• Polyblend Silicone Caulking or equivalent for color

matching• DOW 786 RTV Sealant or equivalent

• 2 (4 is better) of Richelieu 3rd Hand or Taskquick support rods for bracing• RedGard roll-on Waterproofing membrane• Granite epoxy and color matching kit• Suction cups for handling• Template strips• Stone sealer for marble/granite (Aquamix or

other)

WATERPROOFING• All waterproofing must meet or exceed local building code. Inspect the walls for mildew,

moisture or mold before installing Artisan Resin Panels• Acrylic Shower Base or Bathtub - use 2 coats of Custom Building Products RedGard on all

inside corners, adhere the panels to the RedGarded corners with a bead of polyurethanesealant 1" from the edge.


CO

LL

EC

TIO

ND

ET

AIL

SINSTALLATION METHOD, CONT

INSTALLATION INSTRUCTIONS, CONT.

STEP 1: Template the back wall to be covered with Artisan Resin Panels using template strips with a hot glue gun (or a laser template system). If installing a wall box, make the necessary cut out and template around.

STEP 2:Roll on two coats of RedGard (waterprrofing membrane) where the seams will lay.

NOTE: Artisan Resin Panels should be at room temperature at the time of fabrication/installation

STEP 3:Establish how the panels will fit according to the grain or movement in the stone before cutting. cut and test-fit the first panel using the chosen rail saw system.

STEP 4:CUTTING: Using a rail saw, all Artisan Resin Panels can be cut dry using a marble cutting disc

STEP 5: If applying to a painted surface, rough sand the surface prior to applying Great Stuff Pro Wall and Floor Spray Foam Adhesive.

NOTE: Before applying the spray foam adhesive, wipe the aluminum backer with lacquer thinner to clean any dirt from the backer and allow to dry. To install in the field using spray adhesive, spray a consistent bead and stay 6" to 8" across the whole panel. Be sure that the bead contacts the RedGarded corner to achieve a complete seal. Brace the panel for a minimum of 1/2 hour to allow the adhesive to hold. Be sure to plumbed corners (if necessary) using suction cups within the first 10 minutes of bracing the panel. At this time, corners can be plumbed up (if required) using suction cups to manipulate the Artisan Resin Panels.

STEP 6:Install panels securely in place to supports with tight, flush joints.

STEP 7:CAULKING: Using painters tape, tape off the back Artisan Resin Panel approximately 3/8" in from the corner to ensure a clean caulk job. Tape off the inside corner of the Artisan Resin Panels.

Using Custom Building Product (color matched) Polyblend Caulk or Commercial 100% Silicone Caulk, fill inside corners enough that caulking will squeeze out of the joint. Wipe excess caulking and remove painters tape. Brace panels for a minimum of 1/2 hour to allow Dow adhesive to hold.

STEP 8:Run a finish bead of Translucent White DOW 786 RTV Sealant around base and all corners.

STEP 9:FINISHING: Clean panels with lacquer thinner.

SOAP DISHES: To install soap dishes, use an angle grinder to cut slots in the panels at the appropriate locations. Tape off Artisan Resin Panel and corner shelf, fill slots with Polyurethane silicone/adhesive; ensure a good seal. Wipe a thin bead of Polyurethane silicone/adhesive on the back edge of the corner shelf and press into the wall. Wipe off excess and remove tape.

SOAP BOX: To install soap boxes, ensure that a timber brace has been installed between the studs to support the weight of the box, tape of the panel and the edge of the soap box. Run a small bead of polyurethane silicone/adhesive around the perimeter of the soap box and press soap box firmly into the hole.



CO

LL

EC

TIO

ND

ET

AIL

SMAINTENANCERemove dust with a wet rag (dampen with water or glass cleaning product), as you would use for furniture.

WARRANTYMaterial is to be free from defect upon delivery. Please note that variations in color and texture may occur due to the nature of the material.

TECHNICAL DATAPlease contact [email protected]

artisan resin panels...t: 212.206.1730 | f: 212.206.1736 | [email protected] | archsystems.com...

Documents