ARIEL CORPORATION l 740.397.0311 l www.arielcorp.com 1

ASC SCOPE OF SUPPLY

ARIEL SMART COMPRESSOR (ASC)Health Monitoring of the Ariel Compressor

Ariel factory provided equipment:

• Process Gas Pressure Transducers

• Process Gas Temperature RTDs

• Valve Cap Temperature RTDs

• Crankshaft Speed Sensor

• Oil Pressure Transducers Before and After Oil filter

• Oil Temperature RTD

• Frame Vibration Transmitter

• Crankshaft Main Bearing Temperature Sensing (standard on KBZ and larger, optional for JG - JGC:D:F)

• Force Feed Divider Valve Proximity Switch(es)

• Main Module – All units

• Distributed Module(s) – 4 & 6 throw compressors

• Wiring Harnesses Between System Components, Modules and Control Panel

• ASC display/HMI

• M-LinkTM Data Communication Hub

The Ariel Smart Compressor is the next generation in compression monitoring, optimization, and management. Ariel’s

unique electronic platform, now offered on select Ariel compressor models, features a myriad of sensors and harnesses

that relay operating information to an on-board central processor that delivers dozens of data points to your preferred

location or personal device.

The ASC monitors the main compressor operating parameters providing information on the operating conditions and

monitoring for out-of-tolerance parameters. Such as; valve failures, crosshead pin reversal, and auxiliary end torsional

vibration. This system includes the following scope:

ARIEL CORPORATION l 740.397.0311 l www.arielcorp.com 2

Alarm and Shutdown signals are sent from the Main Module to the skid controller: Either the Murphy Centurion inside the

module or a 3rd party controller in the panel

Measured values and alarm/shutdown descriptions are available via Modbus to a 3rd party skid controller

Alarm and Shutdown set points will be programmed at default levels for shipping, and can be modified through the ASC

HMI/Display

An ASC HMI/Display and M-LinkTM module is required for ASC operation. If using a Murphy panel, the ASC display and M-LinkTM

will come pre-mounted in the panel. If using a 3rd party panel, an ASC display kit, M-LinkTM, and associated harnesses will

ship with the compressor.

Suitable for CSA Class 1 Groups A,B,C,D Division II T4

Alarm and/or Shutdown:

• Process Gas Pressure, Suction and Discharge – Static Low and High, Dynamic Low and High

• Process Gas Temperature, Suction and Discharge - Static Low and High, Dynamic Low and High

• Frame Oil Pressure – Low and High

• Oil Filter Pressure Differential

• Frame Oil Temperature - Low and High

• Crankshaft Main Bearing Temperature - High and Differential

• Frame Vibration - High

• Force Feed Lube Cycle Time

• Valve Leak - Calculated

• Piston Rod Load - Calculated

• Crosshead Pin Reversal – Calculated

• Crankshaft Torsional Vibration

• Crankshaft Speed – Low and High

• Process Gas Cooler – High Pressure Differential

24 Hour Support:North America: 888.397.7766Worldwide: +1 740.397.3602