September 2018 ASD-STAN

Newsletter I N S I D E T H I S I S S U E

1. General news

2. Articles from experts (pages 2-3)

3. ASD-STAN publications, statistics, tables with ballots (pages 5-12)

ASD-STAN Rue Montoyer 10/5, B russe l s , B -1000

www.asd-stan.org contact@asd-stan.org

+32 2 775 81 26

General news

Dear readers,

ASD-STAN has published 16 new standards and 1 Corrigendum in September, the details will follow on the next pages. There are 2 ASD-STAN originated EN standards published by CEN in September. We would like to remind on REACH seminar: REACH conformity in Aerospace – Seminar for Engineering and Supply Chain. Below are the details: When: 12th of November 2018 (on-site in Berlin and/or Webinar), 29th of January 2019 (on-site in Stuttgart and/or Webinar), How to register? Please complete this form and send it by email to contact@asd-stan.org For more information see the Flyer

Finally, we want to inform you about the publication of ASD-STAN prEN 7010, Aerospace series — Configuration master — Definition and designation of external threaded fastener product standards. This is the first reach compatible standard of the set of the 7000-series, originating from ASD-STAN D09/WG02 "New REACH compatible standards". On the next 2 pages you will find the input from our experts to inform about some business activities in ASD-STAN Domains and Working Groups.

Thank you and enjoy the read, Andreas Jain Director

Introductory information about our new project ASD-STAN prEN 4879, Aerospace Series — Metallic Materials — Mechanical Properties of Products Produced by Additive Manufacturing

Newsletter

September 2018 Page 2

Over the last years, additive manufacturing has developed from childhood to

adolescence. The curiosity and excitement for the new technology and its new

opportunities in design and manufacturing is now mature. The focus is more and more

on quality aspects: What material properties are reasonably achievable, in a

reproducible way, on a real product rather than just a test-coupon?

Standardization may answer this question by telling the user what level of properties

(e.g. static strength) he can assume for design, and by telling the manufacturer what

material properties need to be achieved to ensure an overall balanced material behavior.

prEN 4879 “Mechanical Properties of Products Produced by Additive Manufacturing”

focusses on metallic materials, manufactured by powder bed fusion with laser beam or

electron beam technology. It appears to be a limitation to only few technologies, but still

leaves a broad field of applications to be considered:

First, the choice of aeronautical materials is large, ranging from Aluminum to Titanium,

Steels, heat-resistant materials like Nickel-Cobalt alloys, and more.

Furthermore, the manufacturing process is not just one process, it's a process chain

where the post-processing has a significant influence on the final properties of the

product. E.g. for Titanium alloys, hot isostatic pressing (HIP) is a common way to reduce

or eliminate voids in the material (such as porosity or lack of fusion). However, fatigue

behavior does not only depend on the materials inner quality, but also on its surface

quality and the technology used for surface treatment.

prEN 4879 aims at providing mechanical and chemical properties for selected materials

that are achievable in an industrial environment, and at providing guidance concerning

the different post treatments, so the user can tailor his own manufacturing process in his

own manufacturing environment to reach the published material properties.

Christoph M. HEINE Project Manager of ASD-STAN prEN 4879 "Mechanical Properties of Products Produced by Additive Manufacturing"

Newsletter

September 2018

Page 3

ASD-STAN activities on Unmanned Aircraft systems "UAS"

The D05/WG08 related to “UAS”, which really became active one year ago, took

up the challenge to address the need for standards to support the future EU

regulation for the “OPEN” drone category.

The OPEN category concerns all the drones used by hobbyists or professionals

when the operations remain simple and safe for the public, which currently

represent the large majority of the market in volume.

The manufacturers who are targeting this market will have the possibility to

“mark” their product with the class number identified in the OPEN category from

C0 to C4, depending of the usage and the performances of the drone system. With

this CE marking process, in short term the manufacturer will have a clear quality

label to promote their product on the European market and the customers (remote

pilots) will be allowed to fly with a simple and efficient declarative approach

(registration) to the authority. Over time, all the new drones’ designs that fall

into the OPEN category will have to be marked with the level of compliance

expected by the regulation (delegated act of EASA) in order to fly in Europe.

The timeline to deliver the EN (harmonized standard) is tight if we consider that

the new EU regulation will enter into force beginning of next year. Thus, the

frequency of the D5WG8 meetings is high, working on a monthly basis to finish the

prEN process by fall 2019 and the EN by beginning of 2020.

The D05/WG08 is collaborating intensively with the CEN, the European

Commission and EASA to achieve its goal in time but is still looking for experts

from all the member states. Representing your country at the D05/WG08 to

address this new EN challenge is an exciting opportunity to support the drone

business development in Europe.

To join the D05/WG08 please contact ASAP your National Standard

Organization or ASD-STAN at contact@asd-stan.org!

Christophe MAZEL Convenor of ASD-STAN – D05/WG08 "UAS Unmanned Aircraft Systems"

Newsletter

September 2018 Page 4

ASD-STAN publications September 2018

Important news:

In September 2018, ASD-STAN has published 15 ASD-STAN

prENs, 1 TR and 1 Corrigendum:

ASD-STAN prEN 2885 P2

ASD-STAN prEN 2886 P2

ASD-STAN prEN 3155-016 P4

ASD-STAN prEN 3155-017 P2

ASD-STAN prEN 3155-044 P2

ASD-STAN prEN 3155-045 P3

ASD-STAN prEN 3475-513 P2

ASD-STAN prEN 3660-062 P3

ASD-STAN prEN 3660-063 P3

ASD-STAN prEN 3660-064 P3

ASD-STAN prEN 3660-065 P3

ASD-STAN prEN 3740 P3

ASD-STAN prEN 4604-007 P5

ASD-STAN prEN 4604-006 P3

ASD-STAN prEN 7010 P1

TR 6058 Edition 12

ASD-STAN prEN 4866 P1 Co1

which are available in our website for purchase.

0

20

40

60

80

100

120

140

160

180

200

6373

90

154

7975 79

72

144

123

176

193

8577

57

2018

2017

2016

Ratified EN Formal VotePublished prEN NWP BallotsNWP

Newsletter

September 2018

Page 6

Page 5

Statistics 2018

63 New Work Proposals (stage 00.00)73 New Work Proposal Ballots (stage 10.00)90 Published prENs (stage 40.00)

154 Documents Sent for Formal Vote (stage 50.00)79 Ratified EN (stage 60.60)

Statistics 2017

75 New Work Proposals (stage 00.00)

79 New Work Proposal Ballots (stage 10.00)

72 Published prENs (stage 40.00)

144 Documents Sent for Formal Vote (stage 50.00)

123 Ratified EN (stage

60.60)

Statistics 2016

176 New Work Proposals (stage 00.00)

193 New Work Proposal Ballots (stage 10.00)

85 Published prENs (stage 40.00)

77 Documents sent for Formal Vote (stage 50.00)

57 Ratified EN (stage 60.60)

Type Domain Number Ed Title Pages Date prEN MECH 2885 P2 Aerospace series — Screws, pan head, offset cruciform

recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated — Classification: 900 MPa (at

ambient temperature)/235 °C

10 01/09/2018

prEN MECH 2886 P2 Aerospace series — Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in

alloy steel, cadmium plated — Classification: 900 MPa (at ambient temperature)/235 °C

10 01/09/2018

prEN ELEC 3155-016 P4 Aerospace series — Electrical contacts used in elements of connection — Part 016: Contacts, electrical, male, type

A, crimp, class S — Product standard

13 01/09/2018

prEN ELEC 3155-017 P2 Aerospace series — Electrical contacts used in elements of connection — Part 017: Contacts, electrical, relay base,

female, type A, crimp, class P — Product standard

13 01/09/2018

prEN ELEC 3155-044 P2 Aerospace series — Electrical contacts used in elements of connection — Part 044: Contacts, electrical, male 044,

type A, double crimping, class T — Product standard

10 01/09/2018

prEN ELEC 3155-045 P3 Aerospace series — Electrical contacts used in elements of connection — Part 045: Contacts, electrical, female, type A, double crimping, class T — Product standard

11 01/09/2018

prEN ELEC 3475-513 P2 Aerospace series — Cables, electrical, aircraft use — Test methods — Part 513: Deformation resistance

(Installation with plastic cable ties)

10 01/09/2018

prEN ELEC 3660-062 P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors —

Part 062: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self locking — Product standard

19 01/09/2018

prEN ELEC 3660-063 P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors —

Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self locking — Product standard

19 01/09/2018

prEN ELEC 3660-064 P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors —

Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self locking — Product standard

23 01/09/2018

prEN ELEC 3660-065 P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors —

Part 065: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self locking — Product standard

20 01/09/2018

prEN MECH 3740 P3 Aerospace series — Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium

alloy, anodized, MoS2 coated — Classification: 1 100 MPa (at ambient temperature)/315 °C

8 01/09/2018

Now available at the ASD-STAN Web-shop (http://www.asd-stan.org/online-document-store/)

These ASD-STAN prEN/TR standards are replacing any previous ASD-STAN prEN/TR

editions with the same number. They will supersede any previous EN editions (if any) with the same number after the CEN

Formal Vote procedure.

Page 6

Newsletter

September 2018

ASD-STAN publications September 2018

prEN ELEC 4604-006 P3 Aerospace series — Cable, electrical, for signal

transmission — Part 006: Cable, coaxial, 50 Ohms, 200 °C, type WM — Product standard

10 01/09/2018

prEN ELEC 4604-007 P5 Aerospace series — Cable, electrical, for signal transmission — Part 007: Cable, coaxial, 50 Ohms,

200 °C, type WN — Product standard

10 01/09/2018

TR ELEC 6058 12 Aerospace series — Cable code identification list 65 01/09/2018

prEN ENV 7010 P1 Aerospace series — Configuration master — Definition and designation of external threaded fastener product

standards

38 01/09/2018

prEN MAT 4866 Co1 Aerospace series — Definitions of imperfections and defects in organic matrix composite materials

51 01/09/2018

16 ASD-STAN prENs and 1 Corrigendum published

Newsletter

September 2018 Page 7

These EN standards are replacing any previous ASD-STAN

prEN/EN editions with the same number.

Type Domain Number Ed Title Pages Date

EN MECH 2878 1EN Aerospace series — Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with

counterbore, in alloy steel, cadmium plated, MoS2 lubricated — Classification: 900 MPa (at ambient

temperature)/235 °C

8 05/09/2018

EN MECH 2880 1EN Aerospace series — Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with

counterbore, in alloy steel, cadmium plated, MoS₂ lubricated — Classification: 900 MPa (at ambient

temperature) / 120 °C

8 05/09/2018

2 ENs released by CEN for publication

The related DIN EN standards will be available soon at the ASD-STAN web-shop.

Newsletter

September 2018 Page 8

Ballots reminder

NWP: New Work Proposal Ballot

Number Domain Edition Title Due Date

3841-100 ELEC P3 Aerospace series — Circuit breaker test methods — Part 100: 04/09/2018

2066 MAT P2 Aerospace series — Extruded section in aluminium alloys — General tolerances

19/09/2018

4842 MAT P3 Aerospace series — X5CrNiCu15-5 (1.4545) — Consumable electrode remelted (ESR or VAR) — Solution treated and

precipitation treated (H1025) — Bar for machining — a or D ≤ 250 mm — 1 070 MPa ≤ Rm ≤ 1 200 MPa — Premium quality

(pq)

01/10/2018

4881 MAT P1 Aerospace series — Micro-arc oxidation of aluminium and aluminium alloys

01/10/2018

2573 MAT P3 Aerospace series — Steel X6CrNiTi18-10 (1.4541) — Softened — Rm ≤ 780 MPa — Wire — 0,25 mm ≤ De ≤ 3 mm

01/10/2018

2467 MAT P2 Aerospace series — Steel X2CrNi18-9 (1.4307) — Air melted — Softened — Plate, sheet and strip — 0,4 mm ≤ a ≤ 20 mm —

520 MPa ≤ Rm ≤ 670 MPa

01/10/2018

3480 MAT P3 Aerospace series — Steel X6CrNiTi18-10 (1.4541) — Air melted — Softened — Plate — 6 mm < a ≤ 50 mm — 500 MPa

≤ Rm ≤ 700 MPa

01/10/2018

3487 MAT P3 Aerospace series — Steel X6CrNiTi18-10 (1.4541) — Air melted — Softened — Bar for machining — a or D ≤ 250 mm —

500 MPa ≤ Rm ≤ 700 MPa

01/10/2018

3488 MAT P3 Aerospace series — Steel X6CrNiTi18-10 (1.4541) — Air melted — Softened — Sheet and strip — a ≤ 6 mm — 500 MPa

≤ Rm ≤ 700 MPa

01/10/2018

6038 MAT P3 Aerospace series — Fibre reinforced plastics — Test method — Determination of the compression strength after impact

01/10/2018

2563 MAT P2 Aerospace series — Carbon fibre reinforced plastics — Unidirectional laminates — Determination of the apparent

interlaminar shear strength

01/10/2018

2564 MAT P3 Aerospace series — Carbon fibre laminates — Determination of the fibre, resin and void contents

01/10/2018

2377 MAT P2 Aerospace series — Glass fibre reinforced plastics — Test method — Determination of apparent interlaminar shear

strength

01/10/2018

TR 8.1200 CAB P1 Aerospace series — Chronobiological effects on passengers on long haul flights and recommendations for improved well-being

03/10/2018

2126 MAT P3 Aerospace series - Aluminium alloy AL-P7075-T651 and T7351 - Plates 6 mm < a ≤ 80 mm

05/10/2018

3375-011 ELEC P3 Aerospace series — Cable, electrical for digital data transmission — Part 011: Single braid — Star Quad 100 ohms

— Light weight — Type KL — Product standard

05/10/2018

2854-002 ELEC P3 Aerospace series — Cables, electrical for general purpose — Cross sections equal to and greater than 9 mm² — Operating

temperatures between – 55 °C and 260 °C — Part 002: General

05/10/2018

6117 MECH P2 Aerospace series — Specification for lubrication of fasteners with cetyl alcohol

09/10/2018

Pages 9-10

Page 6

Newsletter

September 2018

3475-505 ELEC P4 Aerospace series — Cables, electrical, aircraft use — Test methods — Part 505: Tensile test on conductors and strands

10/10/2018

4882 MAT P1 Aerospace series — Steel X5CrNiCu 17-4 (1.4542) — Air melted — Solution treated and precipitation treated — Sheets

and strips — a ≤ 6 mm — Rm ≥ 1070 Mpa

11/10/2018

4883 MAT P1 Aerospace series — Steel X5CrNiCu 17-4 (1.4542) — Air melted — Solution treated and precipitation treated — Plates —

6 ≤ a ≤ 100 mm — Rm ≥ 1 070 Mpa

11/10/2018

4884 MAT P1 Aerospace series — Steel X3CrNiMoAl 13-8-2 — Vacuum induction melted and consumable electrode remelted —

Solution treated and precipitation treated — Bars — a or D ≤ 200 mm — 1 200 MPa ≤ Rm ≤ 1 350 Mpa

11/10/2018

8.1201 CAB P1 Aerospace series — Rotorcraft — Liferafts for operations in hostile sea areas — Requirements, testing and marking

15/10/2018

3197 ELEC P4 Aerospace series — Design and installation of aircraft electrical and optical interconnection systems

17/10/2018

NWP: New Work Proposal Ballot (continuation)

NDB : National Domain Ballot

Number Domain Edition Title Due Date

4875 MAT P1 Aerospace series — Surface treatments — Test method for measurement of electrical contact resistance

08/09/2018

2002-001 MAT P5 Aerospace series — Metallic materials — Test methods — Part 001: Tensile testing at ambient temperature

28/09/2018

4648 ELEC P3 Aerospace series — Cable, electrical — Re-qualification following changes in design, material or manufacturing process

02/10/2018

2854-003 ELEC P3 Aerospace series — Cables, electrical for general purpose — Cross sections equal to and greater than 9 mm2 — Operating temperatures

between − 55 °C and 260 °C — Part 003: Product standard

3/10/2018

4878-001 MAT P1 Aerospace series — Polytetrafluoroethylene (PTFE) — Moulded 26/10/2018

4878-002 MAT P1 Aerospace series — Polytetrafluoroethylene (PTFE) — Ram extruded 26/10/2018

4878-003 MAT P1 Aerospace series — Polytetrafluoroethylene (PTFE) — Paste extruded 26/10/2018

3572 MECH P2 Aerospace series — PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6 800 kPa and 8°30' fitting in

titanium — Product standard

14/11/2018

3207 MAT P2 Aerospace series — Rubber compounds — Technical specification 30/11/2018

2213 MAT P2 Aerospace series — Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Bars — De ≤ 16 mm — 980 MPa ≤ Rm ≤ 1

180 MPa

06/12/2018

2252 MAT P2 Aerospace series — Steel 15CrMoV6 (1.7334) — 1 080 MPa ≤ Rm ≤ 1 250 MPa — Forgings — De ≤ 100 mm

06/12/2018

3523 MAT P3 Aerospace series — Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Bar for machining — De ≤ 100 mm —

1 080 MPa ≤ Rm ≤ 1 280 MPa

06/12/2018

3524 MAT P3 Aerospace series — Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Sheet and strip — 2 mm ≤ a ≤ 6 mm —

1 080 MPa ≤ Rm ≤ 1 280 MPa

06/12/2018

3525 MAT P3 Aerospace series — Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Plate — 6 mm < a ≤ 20 mm — 1 080 MPa

≤ Rm ≤ 1 280 MPa

06/12/2018

3526 MAT P3 Aerospace series — Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Sheet and strip — 0,5 mm ≤ a ≤ 6 mm —

980 MPa ≤ Rm ≤ 1 180 MPa

06/12/2018

Newsletter

September 2018 Pages 11-12

7102 ENV P1 Aerospace series — Bolt, pan head, metric and inch series — Product standard

20/12/2018

7106 ENV P1 Aerospace series — Screw, pan head, slotted, fully threaded, metric and inch series — Product standard

20/12/2018

7108 ENV P1 Aerospace series — Screw, cylindrical head, slotted, fully threaded, small diameter, metric and inch series — Product standard

20/12/2018

7109 ENV P1 Aerospace series — Screw, grub, flat point, slotted, metric and inch series — Product standard

20/12/2018

6114 MECH P11 Aerospace series — Bolt — Countersunk head, Short thread — Inch series

20/12/2018

6115 MECH P10 Aerospace series — Bolt — Protruding head, Short thread — Inch series

20/12/2018

3155-002 ELEC P6 Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts

21/12/2018

9721 DIG P1 Aerospace series — General recommendation for the BIT Architecture in an integrated system

02/01/2019

NDB : National Domain Ballot (continuation)