assembly instruction roof ladder/roof gangway on spacer ... · assembly instruction roof...
TRANSCRIPT
Assembly Instruction Roof Ladder/Roof Gangway on Spacer page 1 MA1506
Industrivägen 1 523 90 Ulricehamn [email protected]
Tel. 0321-261 60 Fax. 0321-167 10 www.welandstal.se
Don't forget to affix the rubber strips under the spacer to avoid chafing.
Assemble the fixing iron on the base
plate and screw to the under-roof using
10 6x35 wood screws.
Assemble the standing seam mount on the roof
seam and tighten the jaws to min. 20Nm. The
jaws must grip round the double-fold edge.
Assemble the fixing profiles on top of the
roofing plate using 5 6.3x19 mm plastic
screws per mount.
Assemble the spacer on the sealing plate using
2 M10 bolt + 2 rubber washers. See assembly
instructions for the sealing plate.
Fixing iron mounted on
the underneath of spacer
with 1 M10x30 + nut
Standing seam mount as-
sembled on the spacer with 1
M10x20 + nut
1 or 2 fixing profiles assem-
bled on spacer using 1
M10x30 coach bolt + nut
Max. distance between spacers 2 m.
Rev.
Date
13
121
1
Assembly Instruction Roof Ladder/Roof Gangway on Spacer page 2 MA1506
Industrivägen 1 523 90 Ulricehamn [email protected]
Tel. 0321-261 60 Fax. 0321-167 10 www.welandstal.se
Assemble the ladder on the spacer, using ladder hooks and 2 M10x20 bolt + nut.
Anti-slip guard. Has to be installed so the loose ladder's rung can latch in the hook and so both sides of the ladder rest against the guttering/roof edge. Use 1 M10x20 + nut
Ladder joint. Assemble using joint bracket and screw joint. 4 M10x20 + nut / joint plate. Bolts are assembled from the inside.
Treads. Hook onto the rung and lock in place using 2 M10x20 + nut. Roof gradient: 8° to 35°
Assemble the roof gangway on the spacer using 2 bolts, M10x20. NOTE! Exact separation fixing c/c 1190
The gangway is joined by overlapping (at least one wave top). 2 bolts M10x20 + nuts are screwed diagonally. At least two mounts on each side of the joint are needed.