assembly instructions for mystery machine · scooby-doo mystery machine stickers follow the...
TRANSCRIPT
98
1
2
3
4
5
6
7
SCOOBY-DOO MYSTERY MACHINE STICKERSFollow the instruction sheet for proper placement of stickers. The extra stickers are for customizing The Mystery Machine, or just for fun!
SCOOBY-DOO and all related characters and elements are trademarks of and © Hanna-Barbera.(s13)Round 2 and design and Polar Lights and design are registered trademarks of Round 2, LLC. ©2013 Round 2, LLC, South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved.
P901-300
RIGHT NAME SIGNSTICK-ON LABEL
LEFT NAME SIGNSTICK-ON LABEL
VAN FRONTSTICK-ON LABELS
RIGHT SIDESTICK-ON
LABEL
1
2
LEFT SIDESTICK-ON
LABEL
3
4
98
BACK DOORS STICK-ON LABELS
5 6 7
And be sure to check out round2models.com for more!
POL901STICKER PLACEMENT
ASSEMBLY INSTRUCTIONS for
Mystery MachineSnap-Together Plastic Assembly Kit
EASY! SNAP-TOGETHER KIT
Before assembling model,study these instructions
carefully.
NOTE: Placing label on van front
before snapping the spare tire into place is
preferred. Otherwise the spare tire can be taken o! and replaced after the labels have been
positioned and applied.
Decorate your MYSTERY MACHINE
using the groovy stickers!
P901-200
Look for these other exciting model kits fromPolar Lights & MPC!
1966 Batmobile SNAP kitPOL824
Wile E. Coyote and theWile E. WillysMPC719
Road Runner and theRail Runner
MPC720
OPTIONAL GLUING TIPS
exactly in the order indicated.
getting cement on outer surfaces of model sections.
getting cement on hands, so as not to
This kit can be assembled by
as indicated by the
conventional manner, and
that is also an easy task.
Painting Suggestions: If extra detailing is desired, you may
Turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AmberBrake lights . . . . . . . . . . . . . . . . . . . . . . . . . . . Red
OPTIONAL PAINTING COLORS
ly high
SCOOBY-DOO and all related characters and elements are trademarks of and © Hanna-Barbera.(s13)Round 2 and design and Polar Lights and design are registered trademarks of Round 2, LLC. ©2013 Round 2, LLC, South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved.
Top
Chassis TabsBody Slots
Frame TabsFrame Tabs
Note the direction of theTaillights when inserting
into the Lower Body.
NOTE: after insertingChassis tabs into LowerBody slots, make sure
frame tabs snap underneaththe body edge.
R14L14
Taillights
15
Left rear door
Right rear door
(4) Wheels
Axles
16
5
4
Rear bumper9
FrontBumper
Upper Body
8
Spare tire 6
Interior
Chassis
Dashboard
Steering Wheel
Shaggy
Scooby-Doo
7
11
6
12
13
10
Roof rackRoof rack
Windows3
77
1
Lower Body
2
13
Headlight
Headlight
Take your time — work carefully. Study the instructions carefully before beginning assembly. This kit is designed for snap or glue assembly. If you decide to paint your model kit you may wish to do so before snapping or gluing parts together.
ASSEMBLY INSTRUCTIONS for
Mystery MachineSnap-Together Plastic Assembly Kit
Push Steering Wheel #11 into
Dashboard #10, then snap dashboard assembly to locator posts in front floor.
Snap Shaggy #6 and Scooby-Doo #7 into the seat. Snap Interior #12
onto Chassis #13.
1
Place Windows #3 by
seating the part on top of the ledges inside
Upper Body #1. Snap Roof Racks #7 to top
of Upper Body.
3
Snap Back Doors #4 Right and Left #5 into Lower Body Assembly by
inserting the bottom hinge pin of each door into the locator hole in
the interior. Align and snap the Upper Body pins into Lower Body front first. Be sure to insert door
upper hinge pins into holes in Upper Body. Snap Front Bumper
#8 into the front of body and Rear bumper #9 to
rear of body.
5
6 Slip each Axle into Chassis #1 and push a wheel firmly onto each end of
each Axle.
Insert pin on Spare Tire # 6 into
slotted hole in Lower Body front. Snap the interior
assembly into Lower Body #2 from the inside by inserting front tabs into slots in the front of the
Lower Body, then snapping back tabs into the slots at
the rear of the Lower Body.
4
Snap the Headlights #14 into Lower Body
#2 from the inside. Snap Taillights #15
into the rear of Lower Body.
2NOTE: Be sure to seat dashboard (#9)
completely into interior (#4)
NOTE: Young modelers
may use fingernail clippers to easily
remove the burs left from attachment
points on rear doors (4 & 5) to ensure
parts fit.