ORIGINAL INSTRUCTIONS

9460198807EN-02

Alfa-V 1 and 2 m legs mounting kitAssembly instructions

9460198807EN-022

Alfa LU-VE is a trademark registered and owned by LU-VE Group. Alfa LU-VE reserves the right to change specifications without prior notification.

1 Important informationThis document is an annex to Alfa-V Instruction Manual and applies to the option 1 and 2 m legs mounting kit. This document is supplied in combination with the Air Cooled Liquid Coolers Product Manual AHE00050 and the Alfa-V Instruction Manual. All manuals must be carefully examined and instructions should be followed up at all times. Alfa LU-VE does not accept liability for any damage resulting from non-compliance to the instructions as given in the manuals and order-related docu-ments.

2 Components

Pos Item Description

1 Leg

2 Frontal wind brace

3 Lateral wind brace

4 Screw M16x70

5 Screw M16x50

Pos Item Description

6 Washer M16

7 Grower M16

8 Nut M16

9 Screw M20x55

10 Washer M20

11 Grower M20

12 Nut M20

③

③

②

①

③

③

3 InstallationAnchor all the legs (1) to a level ground with proper anchor bolts (not included in the scope of supply). Layout as per footprint of the legs mounting kit.

Ø 22 mm

9460198807EN-023

Alfa LU-VE is a trademark registered and owned by LU-VE Group. Alfa LU-VE reserves the right to change specifications without prior notification.

Fix the frontal wind braces (2) to the legs with the M16 screws, washers, growers and nuts.

Pos Size Quantity(per wind brace)

5 Screw M16x50 x2

6 Washer M16 x4

7 Grower M16 x2

8 Nut M16 x2

Fix the lateral wind braces (3) to the legs with the M16 screws, washers, growers and nuts.

Pos Size Quantity (per wind brace)

4 Screw M16x70 x2

6 Washer M16 x4

7 Grower M16 x2

8 Nut M16 x2

With a crane, carefully position the cooler on the legs and support the unit weight. Always follow guidelines and instructions as given in the Air Cooled Liquid Coolers Product Manual and the Alfa-V Instruction Manual to lift the unit.

Fix the cooler to the legs with the M20 screws, washers, growers and nuts.

Pos Size Quantity (per leg)

9 Screw M20X55 x1

10 Washer M20 x2

11 Grower M20 x1

12 Nut M20 x1

Check the tightening of all fixings prior to and just after removing the crane lifting chains.

The structure must be subjected to a mainte-nance check yearly or after any abnormal event.

alfa.luvegroup.com