assembly instructions multicage · assembled indoor protect the floor with a blanket or carpet to...
TRANSCRIPT
www.mimsafe.se
MULTICAGEdouble
ASSEMBLY INSTRUCTIONS
IMPORTANT
GENERAL
MultiCage is made for transport of dogs in vehicle. The cage is made of splinter proof and energy absorbing materials.It has undergone rigorous crash tests it’s design-protected and made of galvanized steel painted with a very weather-resistant polyurethane paint suitable for its use. the design reduces the risk of injury and the choice of material eliminates the risk of splitting damage and gives the cage its energy absorbing characteristics. the product comes with ratchets and anchoring hooks with quick lock to simplify the installation in the vehicle. Practical retractable lifting handles and lockable door with gas spring helps holding the door open when needed.
BEFORE YOU BEGIN
Ensure that you work on a flat surface. If the cage is assembled indoor protect the floor with a blanket or carpet to avoid damaged during assembly.Read the instruction carefully before you begin, it gives you a better understanding when you work step by step during the assembly.You can assemble the cage by yourself but it helps a lot to be two during some of the assembly steps.
CLEANING
Use a soft cloth with wather and mild soap.
RECOMMENDED AREA OF USE
MultiCage is suitable for transport vehicles, motorhomes, vans and pickups with proper cargo loops.It’s not intended to be installed behind the rear seat in a station waggon.If the cage is installed behind the rear seat in a VAN, make sure you don’t interfere with the vehicles deformation zone.
The story of MIMsafe
For more than 30 years, MIMsafe has worked with functional design and manufacturing of safety products for the modern automotive industry. With documentation from hundreds of crash tests and in close collaboration with the major car manufacturers, safe products have been developed and transformed into knowledge. Under the well-known brand name MIMsafe, we have become the leading manufacturer of crash tested and crush proofed non-whiplash dog cages all over the world.
CRASH TEST
This model is crash tested at Rise Research Institutes of Sweden ABFrontal Impact test of a Multi Cage dog crate according to ECE Regulation No. 17Test protocol is available from the manufacture on request.
MANUFACTURER
MIM Construction ABMyren 125SE-462 94 FrändeforsSweden
+46 10 55 00 [email protected]
DAILY INSPECTION
• Make sure the dog cage is intact• That there is no sharp edges• That the door lock works• Check that it is attached to the vehicle’s cargo
loops
G A
B
D
H
C
I
E
J
F
2X6X 8X8XM-VBM6x12FZBM-VBM6x45FZB M-MM6MHM-6FZBM-BR6,4x12x1S
BAG
2XM-SM6x14IA
6XM-SM6x45-IK
2X 2XM-B1687-6SLD M-SFF206M622S
BAG
INCLUDED TOOLS
1X 1XALLEN KEY DRIVER Combination spanner
4X4X 4XM-BR8x19x1,5SM-460641I M-VBM8x20S88
4X4X4XM-460641DM-MM6NySM-SM6x55-IK
rubber
28XM-SM6x14IA
4XM-10520IKP1915-17S
plastic end caps
6254C - 8X6260C - 12X6275C - 20X
BAG
6254M6260M6275M
Product no No of items
2X
E Divider anchor
6254S6260S6275S
Product no No of items
2X
F Divider anchor
6254A6260A6275A
Product no No of items
1X
A Floor
6254N6260N6275N
Product no No of items
4X
H Frame bar
6260P
Product no No of items
4X
I Handle
6260R
Product no No of items
4X
J Anchor
6254T6260T6275T
Product no No of items
2X
K Locking plate
6254E6260E6275E
Product no No of items
1X
B Roof
6254J6260J6275J
Product no No of items
1X
C Divider panel
6254C6260C6275C
Product no No of items
2X
D Sidebars G Door section
6254I6260I6275I
Product no No of items
2X
IMPORTANT
Notice the triangle mark, indicates this side up!
1STEP
A
Floor
D
Sidebars
Use a screw driver to open this clip if needed.This is only a help for assembly and have no
influence on the safety of this product.
4X
CLICK!
2STEP
F
F
Divider anchors
Divider anchors
C
Divider panel
IMPORTANT
If you don’t want to use the divider panel continue to step 5
3STEP
4STEP
2XM-SM6x14IA
6XM-SM6x45-IK
1XALLEN KEY 4
2X 2XM-B1687-6SLD M-SFF206M622S
5STEP
2X6X 8X8XM-VBM6x12FZBM-VBM6x45FZB M-MM6MHM-6FZBM-BR6,4x12x1S
BAG
FK
E
F
Divider anchorsLocking plates
Divider anchors
Divider anchors
IMPORTANT
Follow this step only if you choose not to install the divider
1XCombination spanner
6STEP
G
Door sections
STEP-1
STEP-2
G
Door section
A
Floor
7STEP
90
2X
IMPORTANT
Gently insert all the screws before tightening
8XM-SM6x14IA
1XALLEN KEY 4
8STEP
4X
CLICK!
BRoof
ROO
F-D
OO
R P
OSITIONING
D
B
G
Sidebar
Roof
Door
B Roof
90
9STEP
12XM-SM6x14IA
IMPORTANT
Gently insert all the screws before tightening
10STEP
11STEP
H Handle
H
Frame bars
4X
4X
4X4X
M-460641D
M-MM6NySM-SM6x55-IK
rubber
8XM-SM6x14IA
12STEP
13STEP
4X
4X
JAnchor
4X
4X
4XM-BR8x19x1,5S
M-460641I
M-VBM8x20S88
IKP1915-17S
plastic end caps
6254C - 8X6260C - 12X6275C - 20X
www.mimsafe.seMultiCage double Edition 2019-11
4X
14STEP
Where to place the MultiCage
IMPORTANT
All the FOUR ratchet strapsmust be looped twice
12”300mm