assembly manual briefplooier 1.4
DESCRIPTION
TRANSCRIPT
BRIEFPLOOIER 1.4
http://designforeveryone.howest.be/
Ivo Six / Lenn Tilley / Tine Bossuyt / Cellini De Langhe
159 min45,50 euro
http://briefplooier2012.blogspot.com/
ASSEMBLY MANUALPLOOIHULP
http://designforeveryone.howest.be/
BILL OF MATERIAL- 4 lasered MDF parts- 2 lasered plexi parts- 4 anti slip caps- Anti -slip- 4 bolts M 2,5- 4 nuts M 2,5
BRIEFPLOOIER 1.4
9 different tools are needed
13 standard parts
6 made parts
1 DESCRIPTION Put glue on the 3 tabs.
BRIEFPLOOIER 1.4
/
2 min
Glue
/
4 parts added
€ 1
2 DESCRIPTION Attach de glued tabs to the base plate.
BRIEFPLOOIER 1.4
/
2 min
/
/
0 parts added
€ 0
3 DESCRIPTION Sand the edges until there is no more heigth differece.
BRIEFPLOOIER 1.4
/
3 min
Sandpaper
/
0 parts added
€ 0,50
4 DESCRIPTION Paint the whole assembly with purple paint.
BRIEFPLOOIER 1.4
/
15 min
Paint & paint roller
/
0 parts added
€ 5
5 DESCRIPTION Paint the flower with a small pensil
BRIEFPLOOIER 1.4
/
60 min
Paints & pensil
/
0 parts added
€ 5
6 DESCRIPTION Cut the anti slip in the right size (100 x 90). This has to be done twice.
BRIEFPLOOIER 1.4
/
2 min
Cutter knife & lath
Anti slip
1 part added
€ 10
7 DESCRIPTION Attach the anti slip to the base plate with the lasered plexi parts with the 4 bolt and 4 nuts of M 2,5.
BRIEFPLOOIER 1.4
/
5 min
Srewdriver
Anti slip
12 parts added
€ 0
8 DESCRIPTION Attach the 4 anti slip caps to the back of the base plate.
BRIEFPLOOIER 1.4
/
1 min
/
4 anti slip caps
4 parts added
€ 1
ASSEMBLY MANUALSNIJHULP
http://designforeveryone.howest.be/
BILL OF MATERIAL- 4 lasered MDF parts- 1 pair of scissors- 4 Anti –slip caps- 2 screws- 1 wooden handle- 1 big screw
BRIEFPLOOIER 1.4
12 different tools are needed
9 standard parts.
5 made parts
1 DESCRIPTION First, cut of the handles from the pair of scissors. Secondly, weld the big screw on top of the pair of scissors and drill two holes in it. The diameter of the holes must be 2 mm.
BRIEFPLOOIER 1.4
/
15 min
Welder, drilling machine, drill and saw
Screw and pair of scissors
2 parts added
€ 10
2 DESCRIPTION Put glue on several lasered MDF parts.
BRIEFPLOOIER 1.4
/
3 min
glue
/
4 parts added
€ 1
3 DESCRIPTION Glue the 4 MDF parts in layers. The layers from bottum to top: - Frame - square with text downwards,- simple square- U-form
BRIEFPLOOIER 1.4
/
3 min
/
/
0 parts added
€ 0
4 DESCRIPTION Sand the edges until there is no more heigth difference.
BRIEFPLOOIER 1.4
/
8 min
Sand paper
/
0 parts added
€ 0,50
5 DESCRIPTION Drill a hole with a diameter of 12 mm with a depth of 10 mm.
BRIEFPLOOIER 1.4
/
2 min
Drilling machine & drill
/
0 parts added
€ 0
6 DESCRIPTION Paint the whole assembly with purple paint.
BRIEFPLOOIER 1.4
/
15 min
Paint & roller
/
0 parts added
€ 5
7 DESCRIPTION Paint the text at the back with a small pensil in yellow paint. The wooden handle must also be painted yellow.
BRIEFPLOOIER 1.4
/
20 min
Paint & pencil
/
0 part added
€ 5
8 DESCRIPTION Attach the pair of scissors to the base with 2 screws.
BRIEFPLOOIER 1.4
/
2 min
Srewdriver
screws
1 part added
€ 0,50
9 DESCRIPTION Attach the 4 anti slip caps to the back of the base plate.
BRIEFPLOOIER 1.4
/
1 min
/
4 anti slip caps
4 parts added
€ 1
TECHNICAL ADDENDUM
http://designforeveryone.howest.be/
Laser cut in MDF plate 6 mm
TEAM CONTACTS
http://designforeveryone.howest.be/
[email protected] +32 479 65 57 86
[email protected] +32 474 23 15 46
[email protected] +32 474 55 63 80
[email protected] +32 479 57 65 23
http://designforeveryone.howest.be/
[email protected] +32 51 24 61 90