assembly manual for mobile x - william green · 2012. 5. 30. · assembly manual for mobile x-ray...

Assembly Manual for Mobile X-ray

William Green Assembly Manual for Mobile X-ray of 8 Printed 12/01/2011, 2:07:42 PM Document Version 1.2

QSF0037A

Assembly Manual for Mobile X-ray Suitable for Kodak 2000, Kodak 2100, Kodak 2200 and Trophy Elytis Document Version 1.2 - 12

th January 2011



QSF0037A

Mobile X-ray Parts List

1. 6 x M10 x 65mm UNB CAP Bolts 2. 4 x M5 x 15 UNB CAP Bolts 3. 2 x M3 x 10mm Counter Sunk Philips Head Screws 4. 3 x M10 x 20mm High Tensile Counter Sunk Allen Head bolts 5. 2 x M10 x 25mm Counter Sunk Allen Key Head bolts 6. 2 x M10 x 35mm Counter Sunk Allen Key Head bolts 7. 4 x M10mm Lock Washers 8. 2 x M10mm Flat Washers 9. 4 x M10mm Nuts 10. 4 x M10 mm Nyloc Nuts 11. 2 x Black Handles 12. 1 x Hand Timer Holder 13. 4 x 25mm x 10mm Hole Spacers 14. 4 x 7mm x 10mm Hole Spacers 15. 2 x Castors (with break) 16. 2 x Castors (without break) 17. 1 x Column 18. 1 x Base Plate 19. 1 x Base Plate cover 20. 1 x X-ray Mounting Plate 21. 1 x Accessories Bag Containing: 1 x Pin & 1 x Power Lead 22. 1 x M8 x 25mm Cap Bolt 23. 1 x Dog Point Screw

Tools Required

• 1 x 8mm Allen Key

• 1 x 6mm Allen Key

• 1 x 4 mm Allen Key

• 1 x Philips Head Screw Driver

• 1 x 17mm Spanner

• 1 x Level

# 1

# 2 # 3

# 4 # 5 # 6

# 7 # 8 # 9 # 10



QSF0037A

Accessories Bag # 21

Dog Point screw # 23

Pin stop screw # 22

Castor with Break # 15

Castor without Break # 16

25mm x 10mm Hole Spacer # 13 7mm x 10mm Hole Spacer # 14



QSF0037A

Assembly

1. Fitting castors to the base plate

Parts required:

Part # Qty Description

1 4 M10 x 65mm UNB Cap Bolt

10 4 M10 nyloc nuts

13 4 25 mm x 10mm spacers

14 4 7mm x 10mm spacers

15 2 Castors With Brakes

16 2 Castors Without brakes

18 1 Base plate

Brake Castors - Break castors go to the front legs of the plate. The order of assembly is as follows:

Order Description

1 M10 x 65mm UNB Cap Bolt

2 25 mm x 10mm spacers

3 Castor With Brakes

4 7mm x 10mm spacers

5 M10 nyloc nuts

Non Brake Castors - Non Break castors go to the rear of the plate. The order of assembly is as follows:

Order Description

1 M10 x 65mm UNB Cap Bolt

2 25 mm x 10mm spacers

3 Castor Without Brakes

4 7mm x 10mm spacers

5 M10 nyloc nuts

2. Install base plate cover Slip the base plate cover over base plate Parts required


19 1 Base Plate Cover



QSF0037A

3. Fitting to Column to the base plate Parts required:


1 2 M10 x 65mm UNB Cap Bolts 8 2 M10 Flat washers

17 1 Column

Place the column onto the base plate and secure it with bolts

4. Install X-ray mounting plate and accessories Parts required:


2 4 M5 x 15mm UNB cap bolt

3 2 M3 x 10mm CS Philips screw

4 3 M10 x 20mm CS Allen Head

11 2 Black handles

12 1 Hand timer Holder

20 1 X-ray mounting plate

Take X-ray mounting plate and fit to top of column as shown Attach handles and plastic hand timer holder to Column as shown

5. Mobile X-ray stand is now fully assembled



QSF0037A

Fitting the X-ray Machine to the Mobile Stand

Parts required


5 2 M10 x 25mm CS Allen Key head bolts

6 2 M10 x 35mm CS Allen Key head bolts

7 4 M10 Lock washers

9 4 M10 nuts

X-ray machine wall mounting plate (supplied with new X-ray machine)

* Note: Rotate scissor arm mounting block on wall mounting plate prior to attaching plate to stand Bolt the X-ray mounting plate to the mobile stand ensuring the M10 x 25mm bolts are installed at the bottom of the plate Install as level as possible

# 5 - M10 x 25mm CS Allen Key head bolts



QSF0037A

Installing the pin to the block

Parts required


21 1 Pin – (in accessory bag)

22 1 M8 x 25mm Cap Bolt

Remove one only M8 Bolt from the right hand side of scissor arm mounting block Insert the pin ensuring the flat surface is to the top and facing the direction of the installer as shown Install new M8 x 25mm Cap bolt (# 22) into the scissor arm block with existing washer ensuring that the bolt locates in the groove in the pin, allowing the pin to move freely of a distance of approximately 60°.

M8 bolt to be removed and replaced with a new M8 x 25mm bolt The groove in the pin must line up with M8 x 25mm bolt



QSF0037A

Installing the Scissor Arm Parts required


23 1 Dog Point screw

Break kit (supplied with new X-ray machine)

Install the scissor arm on the pin *Note: Attach the X-ray head before releasing the scissor arm strap as scissor arm is under tension. Insert the dog point screw ensuring that screw meets on the flat surface of the pin to lock the scissor arm from moving on the pin. *Note: The pin only spins in the aluminum block NOT in scissor arm. X-ray arm is only to travel within the two legs of the floor stand, approximately 60°. As shown below.

Dog point screw to go here

Break kit to go here

assembly manual for mobile x - william green · 2012. 5. 30. · assembly manual for mobile x-ray...

Documents