Metal Struts

SUPER WING OPTIONS

H.×2

H.

G.×2

Front Strut

A.

B.

C.

D.

Chart of Included Parts

1/32“He 219 A-0 Uhu”Assembly Instructions

◇Main Strut Assembly

◇Front Strut Replacement

◇Front Strut Actuator Replacement

When assembling the 1/32 “He 219 A-0 Uhu,”use the front strut of this kit (A+B) instead of the die cast-1.

When assembling the 1/32 “He 219 219 A-0 Uhu,” replace the part I-22 with part C of this kit.

To a s s e m b l e t h e wheel, the use of the

“metal strut” of the 1/32 “He 219 A - 0 U hu” i s r e qu i r e d . Please replace the part I-25 with parts D of this kit.

When assembling the 1/32 “He 219 A-0 Uhu,” affix part H of this set in the inner side of B-11, and part G in the inner side of B-12. Assemble the left and right sides in the same way.

Assembling Positions

※By rotating the a x i s b e t w e e n parts A and B, it is p o s s i b l e t o change the front wheel orientation.

※Fix the par ts by ad jus t ing their positions as described.

When using the weighted tires parts (sold separately), the accuracy of the kit increases considerably.

http://www.zoukeimura.co.jp/

©ZOUKEI-MURA INC. All Rights reserved.

Metal Struts

1/32 HEINKEL

ZOUKEI-MURA INC. PRESENTS SUPER WING SERIES® No.06 SWS06-M01

ZOU

KEI-

MU

RA

IN

C. PR

ESEN

TS SU

PER

WIN

G S

ER

IES

® N

o.6

©ZOU

KEI-M

UR

A IN

C. A

ll Rig

hts

res

erved

.

SUPE

R WIN

G OPT

IONS

1/3

2 H

EIN

KELSWS06-M01 These parts will be inserted when assembling

the 1/32 “He 219 A-0 Uhu” kit. Please refer to the instruction manual of the “He 219 A-0 Uhu.”

1/32He 219 A-0 Uhu

Instruction Manual

◇Main Strut Cover Guiderail Assembly

B-11

This kit is made with metal. Please use caution during the assembly.

◆◆Notices Before Assembly◆◆

■Before opening the bag, p lease careful ly read th is instruction manual and verify that all the parts are included. Please also refer to the 1/32 “He 219 A-0 Uhu” instruction manual to use these parts.

■To build this kit, a big pincher, a cutting knife, sandpaper, waterproof sandpaper, instant glue, and Metal Primer spray are required. Please make sure they are at hand before starting your work.

■This kit is made with metal. Parts are remodeled. After cutting with the large pincher the “gate” made during production, scrape the flash with sandpaper and polish the surface using waterproof sandpaper. Because the blade of nippers might break up, please use caution. After roughly sharpening the “parting lines” with the cutting knife and the sandpaper, clean up and polish the surface with waterproof sandpaper. Be careful not to damage the parts.

■To affix the parts of the kit, please use instant glue. Please do not use glue dedicated to plastic models.

■Before painting, make a primer coat using the Metal Primer. (Without primer coat, paint may peel.)

■The recommended brand for painting your kit is the latest line of paint from Vallejo Color, due to its non-toxicity and environmental friendliness. While referring to resources on historical Luftwaffe aircrafts, you may paint the model with the coloring of your choice.

※Please carefully use the tools and the solvents used for assembly and painting by referring to their instruction manuals.

451

8992

5283

59

●Th i s i t em i s mea n t f o r hobbyists 15 years of age or older. Please do not give this item to children under 15.

●This item is intended for use with the Zoukei-mura 1/32 "He 219 A-0 Uhu".

●The polyethylene bags that c o n t a i n t h e p a r t s a n d assembly manual present a suffocation risk. Please do not drop the parts or bend them in unintended ways, as they may be damaged.

●In order to properly express the shape of the sculpts, it was unavoidable for some parts to have sharp edges. Please be careful.

■Plan & Design : Zoukei-Mura, Inc.■Manufacturer : MDC■Distributor : VOLKS, Inc.　　http://www.volks.co.jp/en/index.aspx　60 Goshonouchi Nakamachi Shichi-jo, 　Shimogyo-ku, Kyoto Japan 600-8862

Plastic model cement won’t work on these parts. Please use a suitable instant glue.

1/32「He 219 A-0 Uhu」These are extra parts to be used with the “He 219 A-0 Uhu” kit.

1/32　「He 219　 A-0 Uhu」These are extra parts to

be used with the “He 219 A-0 Uhu” kit.

1/32「

He 219

A-0 U

hu」These are extra parts to be used with

the “He 219 A-0 Uhu” kit.

We take the utmost of care when overseeing manufac-turing, but if your kit is among the very small percent-age that contains a defective part, please contact customer service within two weeks of your purchase with your full name and order number.

Purchasers from VOLKS Japan International Web Site:Please contact imos@volks.co.jp.Purchasers from VOLKS USA:Please contact service@volksusa.com.

P.32

1/32He 219 A-0 Uhu

Instruction Manual P.32

1/32He 219 A-0 Uhu

Instruction Manual P.32

1/32He 219 A-0 Uhu

Instruction Manual P.33

Attention!

■Plan & Design : Zoukei-Mura, Inc.■Manufacturer : MDC■Distributor : VOLKS, Inc.　

310

0D.×2 F.×2 H.×2

E-1.×2

E-2.×2

G.×2

A.

B.

C.

E.-1

E.-2 F.

When assembling the 1/32 “He 219 A - 0 Uhu” k i t , replace the parts J-13, J-14, J - 2 0 , J - 21, J - 2 5 a n d diecast-2 with the main struts (parts E-1, E-2 and F) of this kit. Assemble the left and right sides in the same way.

Insert E-2 into E-1, adjust the direction of the parts, attach part F and fix. (Be careful: the par ts do not rotate.)※Assemble 2 sets.