assembly stress analysis report @79
TRANSCRIPT
-
7/31/2019 Assembly Stress Analysis Report @79
1/9
Stress Analysis Report @ 79 RPM
Analyzed File: Assembly3.iam
Autodesk Inventor Version: 2011 (Build 150239000, 239)
Creation Date: 07/05/2012, 10:51 p.m.Simulation Author: Ing. Javier Vespa
Project Info (iProperties)
Summary
Title
Author Javier
Project
Part Number Assembly3
Physical
Mass 193308 kg
Area 351181000 mm^2
Volume 2,46252E+010 mm^3
Center of Gravityx=-0,0000840842 mmy=-0,0162167 mmz=1220,29 mm
Note: Physical values could be different from Physical values used by FEA reported below.
Simulation:1
General objective and settings:
Design Objective Single Point
Simulation Type Static Analysis
Last Modification Date 07/05/2012, 10:46 p.m.
Detect and Eliminate Rigid Body Modes No
Separate Stresses Across Contact Surfaces No
Motion Loads Analysis No
Advanced settings:Avg. Element Size (fraction of model diameter) 0,1
Min. Element Size (fraction of avg. size) 0,2
Grading Factor 1,5
Max. Turn Angle 60 deg
Create Curved Mesh Elements Yes
Use part based measure for Assembly mesh Yes
Page 1 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
2/9
Operating conditions
Body Loads
Load Type Body Loads
Angular Velocity
Vector X 0.000 deg/s
Vector Y 0.000 deg/s
Vector Z 474.000 deg/s
Axis Location X 0.000 mm
Axis Location Y 0.000 mm
Axis Location Z 0.000 mm
Angular Acceleration
Vector X 0.000 deg/s^2
Vector Y 0.000 deg/s^2
Vector Z 0.000 deg/s^2
Selected Face(s)
Page 2 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
3/9
GravityLoad Type Gravity
Magnitude 9810.000 mm/s^2
Selected Face(s)
Page 3 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
4/9
Fixed Constraint:1Constraint Type Fixed Constraint
Selected Face(s)
Page 4 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
5/9
ResultsReaction Force and Moment on Constraints
Constraint NameReaction Force Reaction Moment
Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)
Fixed Constraint:1 1896220 N
0 N
0 N m
0 N m
0 N 0 N m
-1896220 N 0 N m
Result Summary
Name Minimum Maximum
Volume 2.46236E+010 mm^3
Mass 193296 kg
Von Mises Stress 0,000128583 MPa 99,4671 MPa
Displacement 0 mm 0,18257 mm
Safety Factor 2,08109 ul 15 ul
Z Displacement -0,0017664 mm 0,179794 mm
Figures
Von Mises Stress
Page 5 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
6/9
Displacement
Page 6 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
7/9
Safety Factor
Page 7 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
8/9
Z Displacement
Page 8 of 9Stress Analysis Report @ 79 RPM
07/05/2012file:///C:/Users/Javier/Documents/Inventor/Baygorria/Assembly3%20Stress%20Analysis...
-
7/31/2019 Assembly Stress Analysis Report @79
9/9
C:\Users\Javier\Documents\Inventor\Baygorria\Assembly3.iam
Page 9 of 9Stress Analysis Report @ 79 RPM