asybcoviking pump gear pump viking series 115 canadian • ideally suited for direct drives at...
TRANSCRIPT
ASYB
CO
POMPE À ENGRENAGES GEAR PUMP
VIKI
NG P
UMP
GEAR PUMP VikingSeries 115 Canadian
• Ideally suited for direct drives at nominal motor speeds from 900 to 1750 RPM.
• Capacities to 30 GPM (114 LPM). Sizes 3/4’’ thru to 1 1/2’’ (19 mm thru to 38 mm). Differential pressure to 100 PSIG. (690
kPa).
PumpSeries
32
115
32
115
32
115
32
115
Pump Model
G
G 2
H
H 4
Suctionand
DischargeSize (In)
3/4
(NPT)
1
(NPT)
1
(NPT)
1 1/2
(NPT)
ViscositySSU
38100750
2 5007 500
25 00038
100750
2 5007 500
25 00038
100750
2 5007 500
25 00038
100750
2 5007 500
25 000
PumpRPM
1 2001 2001 200
950780640
1 2001 2001 200
950780640
1 2001 2001 200
950780640
1 2001 2001 200
950780640
25 PSI
GPM
5.76.06.05.24.23.45.76.06.05.24.23.4
10.010.010.59.07.25.8
20.020.021.017.515.011.2
50 PSI
GPM
5.56.06.05.24.23.45.56.06.05.24.23.49.0
10.010.59.07.25.8
20.020.021.017.515.011.2
75 PSI
GPM
5.96.05.24.23.4
5.96.05.24.23.4
10.010.59.07.25.8
20.021.017.515.011.2
100 PSI
GPM
5.96.05.24.23.4
5.96.05.24.23.4
10.010.59.07.25.8
20.021.017.515.011.2
• General Purpose
• Designed and engineered to serve petroleum, chemical,process and manufacturing industries.
• 750 GPM (2839 L/m) • 100 PSI (690 kPa)
• 1 1/2’’ to 6’’ (38.1 to 152 mm) • 2 000 000 SSU (439 500 CS)
SERIES 32 US
• Same as 115 Canadian• Long shaft non supported
by pillow block.
SERIES 115
• Same as 32 US• Need bearing to support shaft
VIKI
NG P
UMP
Viking TRUCK AND TRANSPORTROTARY PUMPS
Series 120
Liquid transfer service of
• Fuel oil• Kerosene• Asphalt• Gasoline• Diesel oils, industrial liquids• Petroleum products• Chemical products
• Pump operating speeds to 640 RPM• Capacities to 175 GPM• Sizes 1 1/4’’ thru 3’’• Pressures to 200 PSIG
Packing gland
Multi-ring, extra deep and long stuffing box, to reduce possibleleaks to absolute minimum. Self-adjusting dripproof mechanicalseals are available as an optional feature.
Self-priming
The series 120 pump is completely self-priming - eliminates vapourlocking conditions, excellent vacuum developing characteristics,assures complete ‘’pump out’’ in tank truck applications.
Shaft
Precision ground, extra heavy-designed so as not to deflect or twist under the most severe applications, assures longer sealing and bearing life.
J-124
K-124
KK-124
L&LQ-124
LL-124
LM-124
7502 5007 500
7502 5007 500
7502 5007 500
7502 5007 500
7502 5007 500
7502 5007 500
165550
1 650165550
1 650165550
1 650165550
1 650165550
1 650165550
1 650
400400400400400400400400400400400400400400400400400400
210210210210210210210210210210210210210210210210210210
325325325325325325325325325325325325325325325325325325
999999999999999999999999999999999999
163163163163163163163163163163163163163163163163163163
640520420640520420640520420640520420520420350420350280
32.025.021.063.051.041.085.070.058.01501209714611810314511590
1219580238193155322265220568454367553447390549435341
2.02.02.44.24.44.45.05.45.89.08.09.57.09.010.06.06.05.0
1179576238189155318265216556454367473439386549435341
3.03.53.16.06.06.08.07.57.512.512.012.512.012.012.511.09.08.0
31.025.020.063.050.041.084.070.057.01471209714511610214511590
1179176235189155318261212549439363537435379530416322
6.57.04.6
11.010.08.9
15.012.510.222.020.018.022.520.017.521.016.014.0
31.024.020.062.050.041.084.069.056.01451169614211510014011085
ModelSeries
SSU
Viscosities
CS oFoF oCoC
SpeedMaxRPM US
GPM
(2) Capacities & Power Requirements at Set Differential Pressures
LPM BHP LPM BHPUS
GPM LPM BHPUS
GPM
HydrostaticTest
PressurePSI
Max. RecommendedTemperature
Pack Seal50 PSI - 345 kPa 100 PSI - 690 kPa Max 200 PSI - 1380 kPa
ROTARY POSITIVE Viking DISPLACEMENT PUMPS
Series 124
•Rugged and dependable for demanding applications.
•Designed and engineered to serve petroleum, chemical,process and manufactured industries.
• 1000 USGPM (3 784 L/m) • 200 PSIG (1 380 kPa)
• 1 1/2’’ to 6’’ (38.1 to 152 mm) • 2 000 000 SSU (439 500 CS)
• 650 oF (340 oC)
VIKI
NG P
UMPS
34 US MODEL
Same as 230 series Canadian
JACKETED ROTARY PUMP VikingSeries 230 CanadianSeries Q 34 US
ModelNumber
* LQ34
* Q34
M34
N34
** PortSize
Inches
2 1/2
3
4
5
GPM
NominalPumpRating
90
200
280
450
RPM
420
350
280
280
25 PSI
Motor HP PSIG
3
7 1/2
10
15
50 PSI
5
10
15
25
100 SSUand up
100
75
75
75
MaxoT / oF
450
450
450
450
Steel FittedConstruction
RecommendedAbove thisViscosity
SSU
25 000
7 500
25 000
2 500
TempoF
365
365
365
365
PressurePSIG
Steam (Sat.)
Maximum Temperature Pressure of Fluid in Jackets
150
150
150
150
Heat Transfer OilTemp
oF
650
650
650
650
PressurePSIG
150
150
150
150
Maximum Hydrostatic
Pressure
PSIG
400
400
400
400
ApproximateShippingWeight
Pounds
180
350
530
750
Less than100 SSU
Maximum Discharge PSI
50
50
50
50
1 200
420
420
350
280
280
Model
H x 4 - 2301 1/2'' (NPT)
KK - 2302'' (NPT)
LQ - 2303'' (ANSI)
Q - 2304'' (ANSI)
M-2305'' (ANSI)
N - 2305'' (ANSI)
SSU
Viscosities
NominalCapacities
Based on50 PSI(345 kPa)
Power Requirementsat Set Diffenrential Pressures
100750
2 5007 500
100750
2 5007 500
100750
25007 500
100750
2 5007 500
100750
2 5007 500
100750
2 5007 500
CS
21165550
1 65021
165550
1 65021
165550
1 65021
165550
1 65021
165550
1 65021
165550
1 650
25 PSIBHP
.711.251.581.71.31.92.32.52.33.23.84.46.58.89.311.08.912.213.814.814.520.022.024.4
100 PSIBHP
1.752.152.112.224.74.64.54.27.87.07.37.0
50 PSIBHP
1.031.521.581.942.32.63.23.63.85.04.85.310.0
12.0
13.7
18.021.026.027.028.0
USG PM
20211715
463794938066
205215173145290300250210480490400340
RPM
PumpSpeed
950780
350280
350280
280230
230190
230190
17.0
75 PSIBHP
1.41.891.922.13.33.84.03.86.06.16.36.713.415.7
19.423.0
31.034.0
14.8
21.0
33.0
55
LPM
76796457
174140356352302250776814655549
1 0981 136
946795
1 8171 8551 5141 287
208
Viking Jacketed Pumps are specifically designed to handle heavy,viscous liquids requiring temperature control to maintain a flowingstate, assuring efficient handling of liquid pumped.
230 CANADIAN MODEL
Same as 34 series US
* “Q” Size has steel idler** Ports are suitable for use with 125# ANSI (ASA) cast iron or 150# ANSI (ASA) steel companion flanges fittings.
VIKI
NG P
UMPS
Viking ROTARY GEAR PUMPSeries 190
Model
Series
GG - 1901'' (NPT)
HJ - 1901 1/2'' (NPT)
HL - 1901 1/2'' (NPT)
AS - 1902 1/2'' (NPT)
AK - 1902 1/2'' (NPT)
SSU
Viscosities
750
2 5007 500
750
2 5007 500
750
2 5007 500
7502 5007 500
7502 5007 500
CS
165
5501 650
165
5501 650
165
5501 650
165550
1 650165550
1 650
1 8001 2001 2001 2001 8001 2001 2001 2001 8001 2001 2001 2001 2001 2001 2001 2001 2001 200
.93
.50
.701.022.031.201.602.302.501.401.902.902.203.605.603.204.207.00
USGPM
117772315161633212223363636565656
LPM
4226262687576161125798387136136136212212212
100 PSI
690 kPa
BHP
50 PSI
345 kPa
BHP
1.28.75.95
1.252.701.602.002.703.602.002.503.403.404.806.704.906.409.00
150 PSI
1035 kPa
BHP
1.681.001.151.503.502.102.503.204.602.803.204.004.706.007.806.808.10
11.00
200 PSI
1380 kPa
BHP
2.021.251.401.754.202.603.103.605.603.404.004.705.607.008.808.40
10.0012.20
250 PSI
1725 kPa
BHP
2.451.571.652.055.203.103.504.106.904.204.705.806.808.20
10.0010.2011.9014.00
Power Requirements at Set Differential Pressures
Pump
Speed
RPM
Nominal
Capacity
• 6 to 56 GPM• 250 PSIG• 10 000 SSU• -40 oC to 177 oC
Viking ROTARY GEAR PUMPSeries 180
Model
F
FH
GPM
Capacity
1.0
1.5
2.0
3.0
LPM
3.8
5.7
7.6
11.4
1 200
1 800
1 200
1 800
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
SSU
3810075038
10075038
10075038
100750
CS
320
1653
20165
320
1653
20165
100 PSI
HP
50 PSI
HP
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.33
.50
150 PSI
HP
.25
.25
.25
.25
.25
.33
.33
.25
.33
.33
.50
.50
200 PSI
HP
-.25.25-
.33
.50-
.33
.50-
.50
.75
250 PSI
HP
-.33.33-
.33
.50-
.50
.50-
.75
.75
Power Requirements at Set Differential Pressures
PumpSpeedRPM
Oil Viscosity
Capacity range : 1 to 3 GPM3.8 to 11.4 LPM
Pressures to : 250 PSIG1725 kPa
• Relief valve optional• Heavy duty deep-grooved ball type radial
and thrust bearing• Standard with mechanical shaft seal
Viking AMMONIA ROTARY PUMPSSeries 480
• 60 GPM• 75 PSI• - 60 oF
Suction and
Discharge Size
Inches
Maximum
Pump Rating
1 1/2 npt
2 npt
2 npt
2 npt
3 asa
3 asa
Model
Number
JX1
KX1
KK
L
LQ
LL
GPM
11
22
30
50
50
60
RPM
280
280
280
280
280
280
Maximum
Recommended
Differential
Pressure PSIG
75
75
75
75
75
75
Minimum
Recommended
Temperature oF
Pumps can be used
to -60 oF if provision
is made for providing
heat to oil in
seal chamber.
-30
-30
-30
-30
-30
-30
Model
GG1'' (NPT)HJ1 1/2'' (NPT)HL1 1/2'' (NPT)AS2 1/2'' (NPT)AK2 1/2'' (NPT)
USGPM
NominalCapacity
8.05.019.011.026.016.0
28.0
46.0
LPM
301972429861
106
174
1 8001 2001 8001 2001 8001 200
1 200
1 200
350
DifferentialPSIG
100
DischargePSIG
Hydrostatic TestPressure
PSIG
525
LBS
Approx. ShippingWeight
16
40
40
75
75
KG
7
18
18
34
34
Maximum Recommended PressurePump
SpeedRPM
VIKI
NG P
UMPS
• 48 USGPM (180 LPM)• 100 PSIG
LP-GAS ROTARY PUMPS VikingSeries 690
VIKI
NG P
UMPS
STAINLESS STEEL SANITARYViking POSITIVE DISPLACEMENT PUMPS
Series 400
1. Tri-Lobe Rotors
Tri-lobe rotors are available in the 500 sizes modelsand are supplied as standard equipment on all othermodels.
2. Multi-Lobe Rotors
Supplied as standard equipment in the 500 sizesmodels only and are highly efficient on lower vis-cosity.
3. Twin-Blade Rotors
Large particles, such as fruit in jams or meat in pie fillings.
Viking GENERAL PURPOSEThin Liquid
Model
Series
505X507X510X10101010X10151015X11151115X11201120X20202020X21302130X30403040X3160X
Suction and
Discharge Size
(Inches)1/23/41111 1/21 1/21 1/21 1/2222233446
12.512.522.5
4242424264646464
142142230230320320495
12012080
11015011015075
10075
10011015075
10075
10065
RPM
1 0001 0001 000
870870870870850850850850800800800800600600600
Theoretical
Displacement
USGPM / 100 RPM
Max.
Differential
Pressure
PSIG
1.321.322.304.924.924.924.927.807.807.807.8018.018.028.828.854.054.054.0
Typical
Horsepower
Range1/2 - 1 1/2
1/2 - 21/2 - 51/2 - 51/2 - 51/2 - 51/2 - 5
3/4 - 7 1/23/4 - 7 1/23/4 - 7 1/23/4 - 7 1/2
2 - 152 - 152 - 202 - 20
10 - 3010 - 3010 - 30
USGPM
Max Pump Rating
(at 300 SSU)
ModelNo
S1SS1LS2SS2LS3SS3LS4SS4L
PortSize
Inches111 1/222334
300300300300300300300300
GPM12244590
124248300600
RPM1 1501 150
950950870870700700
Max Recommended
Discharge Pressure
When Handling100SSU Liquid at Rated Speeds
PSIG
Max.Hydrostatic
PressurePSIG
200100200100200100200100
Max.Recommended
oT
oF300300300300300300300300
ApproximateShippingWeight
(Less Power)Pounds
363885
106196214490593
NominalPumpRating
• 500 USGPM• 150 PSIG• 1 million SSU• 150 oC• Non-corrosive• Clean, Hygienic• 1/2 in. thru 6 in.
2’’ MODELS 18 - 143 US GPM
3’’ MODELS 35 - 232 US GPM
4’’ MODELS 132 - 330 US GPM
VIKI
NG P
UMPS
POSITIVE DISPLACEMENT PUMPS VikingLinco
150
28
2.9
28
3.7
28
4.1
27
4.8
27
5.3
100
18
2.8
18
3.3
18
3.8
18
4.1
18
4.9
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
PSI
0
25
50
75
100
Net Wt. 100 lb. • For Relief Valve add 20 lbs
200
41
3.0
40
3.9
39
4.7
38
5.2
38
5.7
54
3.1
53
4.2
52
5.0
51
6.0
50
7.0
91
3.5
89
5.0
87
6.4
85
7.9
84
9.3
300
66
3.2
64
4.4
63
5.4
62
6.7
60
7.9
350
79
3.3
77
4.8
75
6.0
73
7.2
72
8.5
450400
104
3.7
101
5.3
98
6.9
96
8.5
94
10.2
500
117
3.9
114
5.6
111
7.2
108
9.2
106
11.0
550
130
4.0
127
6.0
124
7.7
121
9.9
118
11.7
600
143
4.1
139
6.2
135
8.2
131
10.5
128
12.5
Pump - Rotational Speed (RPM)
250
150
77
1.4
73
3.0
67
4.2
63
5.7
58
6.8
100
50
1.0
45
2.2
42
3.0
39
3.8
35
4.3
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
PSI
0
25
50
75
100
Net Wt. 170 lb. • For Relief Valve add 30 lbs
200
102
1.8
97
3.8
92
5.7
87
7.6
83
9.3
127
2.2
123
4.6
117
7.0
112
9.5
107
12.0
206
3.5
200
7.1
192
11.3
185
15.0
177
19.0
300
158
2.5
151
5.5
144
8.5
138
11.5
132
14.2
350
182
3.0
175
6.2
169
10.0
162
13.5
155
16.8
450400
232
4.0
225
8.0
215
13.0
208
17.4
200
21.8
500
-
-
-
-
-
-
-
-
-
-
550
-
-
-
-
-
-
-
-
-
-
600
-
-
-
-
-
-
-
-
-
-
Pump - Rotational Speed (RPM)
250
350
182
3.0
175
6.2
169
10.0
162
13.5
155
16.8
300
158
2.5
151
5.5
144
8.5
138
11.5
132
14.2
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
Flow - USGPM
Horsepower
PSI
0
25
50
75
100
Net Wt. 170 lb. • For Relief Valve add 30 lbs
400
206
3.5
200
7.1
192
11.3
185
15.0
177
19.0
232
4.0
225
8.0
215
13.0
208
17.4
200
21.8
306
5.5
296
10.5
287
17.0
278
23.5
268
29.0
500
256
4.5
247
9.0
239
14.2
232
19.2
223
24.2
550
280
5.0
270
9.5
262
15.5
255
21.2
245
26.5
650600
330
6.0
320
11.5
310
18.5
300
25.0
290
31.2
700
-
-
-
-
-
-
-
-
-
-
750
-
-
-
-
-
-
-
-
-
-
800
-
-
-
-
-
-
-
-
-
-
Pump - Rotational Speed (RPM)
450
• Water, including dirty water, oil, asphalt, paper pulp, molasses,fertilizer slurries, seal coat, crude oil, manure sluries, many mildly abrasive or corrosive liquids. Note : Not suitable for dipolar sol-
vents.
• Bidirectional pump design reduces plumbing costs and can be used with a reversing PTO or hydraulic drive for loading and unloading operations.
• Nitrile rotors and bronze bushings are petroleum resistant with a maximum operating temperature of 200 oF.
Rotors
• Hydrin provides moderate abrasion resistance and working temperatures to 250 oF
• Pentaprene provides high abrasion resistance up to 160 oF• Ultraprene combines high abrasion and temperature
resistance to 300 oF.
• Relief valves are available in 50, 75, and 100 PSIG.
ROPE
R PU
MPS
Roper Pumps MEDIUM PRESSURE PUMPSSeries F •
Pressures to 300 psi •For Metering, Blending, Fuel Supply at Standard Motor Speeds •
SERIES F-1
SERIES F-10
General Performance Information
Approx.Normal Ap. Temp.
Roper Capacity Port Max. Normal LimitPump Range Size Dr. Pump Std. Spec.Series GPM In. H.P. RPM Const. Const.3611 27 - 77 2 8 up to 700 212 oF 400 oF4617 41 - 118 3 12 up to 700 212 oF 400 oF3622 60 - 155 3 15 up to 700 212 oF 400 oF3735 64 - 210 3 21 up to 600 212 oF 400 oF3658 100 - 350 4 40 up to 600 212 oF 400 oF3648 97 - 440 4 35 up to 900 212 oF 400 oF
Materials of ConstructionStandard Available
Housing Cast Iron DuctileIron*
Gears Hardened BronzeSteelAlloy
Bearings Bronze Iron orCarbon
Shaft Hardened StainlessSteel Steel*
* Not Available in all Sizes
Roper Pumps GENERAL PURPOSE PUMPSSeries 3600, 3700, 4600, 4700 •
Pressures to 125 psi •For Mixing, Blending, Recirculating, Transfer •
SERIES F-100
SERIES F-150
SERIES 3600
SERIES 3648
SERIES 3722
SERIES 4622
Jacketed
General Performance Information
Approx.Normal Ap. Temp.
Roper Capacity Port Max. Normal LimitPump Range Size Dr. Pump Std. Spec.Series GPM In. H.P. RPM Const. Const.F - 1 .6 - 1.5 1/2 1 up to 1800 212 oF 250 oFF - 5 2 - 6 1/2 3.5 up to 1800 212 oF 250 oF
F - 10 3 - 11 3/4 7.5 up to 1800 212 oF 250 oFF - 50 20 - 60 2 15 up to 1200 212 oF 250 oFF - 100 40 - 130 2 1/2 32 up to 1200 212 oF 250 oFF - 300 170 - 320 4 100 up to 900 212 oF 250 oF
Materials of ConstructionStandard Available
Housing Cast Iron -
Gears Steel StainlessSteel*
Bearings Bronze Iron*
Shaft Hardened StainlessSteel Steel*
* Not Available in all Sizes
STAINLESS STEEL PUMPS Roper Pumps• Series 2600, 2700, 26 000, 27 000• Pressures to 100 psi• For Virtually Any Industrial Chemical
General Performance Information
Approx.Normal Ap.
Roper Capacity Port Max. Normal Temp.Pump Range Size Dr. Pump LimitSeries GPM In. H.P. RPM26016 6 - 28 1 1/4 3 up to 1800 350 oF26024 8 - 28 1 1/4 3 up to 1200 350 oF26032 13 - 56 2 6 up to 1800 350 oF26064 24 - 54 2 6 up to 900 350 oF2622 32 - 200 3 16 up to 900 350 oF2722 32 - 200 3 16 up to 900 350 oF
Materials of ConstructionStandard Available
Housing 316Stainless -
Steel
Gears Special HardenedHardenable 440
Nickel StainlessStainless Steel*
Steel
Bearings Carbon -
Shaft 316 HardenedStainless 440
Steel StainlessSteel*
* Available in 2622, 2722 only
SERIES 27016 - 064
SERIES 2722
General Performance Information
Approx.Normal Ap. Temp.
Roper Capacity Port Max. Normal LimitPump Range Size Dr. Pump Std. Spec.Series GPM In. H.P. RPM Const. Const.A - 005 .2 - 2 3/8 .5 up to 3600 212 oF 400 oFA - 01 .4 - 4 3/8 1 up to 3600 212 oF 400 oFA - 03 2 - 11 3/4 3 up to 3600 212 oF 400 oFA - 08 4 - 14 1 1/4 3 up to 1800 212 oF 400 oFA - 16 8 - 29 1 1/4 4 up to 1800 212 oF 400 oFA - 32 16 - 56 2 8 up to 1800 212 oF 400 oF
Materials of ConstructionStandard Available
Housing Cast Iron DuctileIron*
Gears Hardened -Steel
Bearings Bronze Iron orCarbon
Shaft Hardened -Steel
* Not Available in all Sizes
LOW PRESSURE PUMPS Roper Pumps• Series A• Pressures to 150 psi• For Pumping Clean Liquids at Standard Motor Speeds
SERIES 26016 - 064
SERIES 2622
SERIES AM - 02
SERIES AM - 32
SERIES AM - 16
SERIES AP - 32
ROPE
R PU
MPS
TUTH
ILL
Tuthill CAST IRON AND CAST STEELST Series
Tuthill STAINLESS STEELST Series
Model Number
Cast Iron &Cast Steel
Port Size
IN / MM
251.5040
1.5040
2.0050
2.5065
3.0080
3.0080
4.001006.001506.001506.00150
1.00
Nominal CapacityAt Maximum RPM
GPM / LPM Max RPM
1 800
1 800
1 800
1 500
1 500
1 500
1 200
950
750
750
500
Max DifferentialPressure
PSI / BAR
HydrostaticTest Pressure
PSI / BAR
STI / STC 009
STI / STC 015
STI / STC 030
STI / STC A50
STI A80
STC B80
STI / STC 135
STI / STC 225
STI / STC 275
STI / STC 350
STI / STC 550
934155730114501898030380303135511225852275104135013255502082
2001420014200142001420014200142001420014150101501015010
30021
30021
30021
30021
30021
30021
30021
30021
30021
30021
30021
Model Number
Cast Iron &Cast Steel
Port Size
IN / MM
251.0025
1.5040
1.5040
1.5040
2.0050
3.0080
3.0080
3.0080
6.001506.00150
1.00
Nominal CapacityAt Maximum RPM
GPM / LPM Max RPM
1 800
1 800
1 200
1 200
1 200
1 000
1 000
800
640
500
500
Max DifferentialPressure
PSI / BAR
HydrostaticTest Pressure
PSI / BAR
STS A03
STS A06
STS 009
STS 015
STS 030
STS A50
STS B80
STS 135
STS 225
STS 275
STS 350
3.61462362310382076331265320290341150568183694233883
200142001415010150101501015010150101501015010100
7100
7
30021
30021
30021
30021
30021
30021
30021
30021
30021
30021
30021
TUTH
ILL
PROCESS PUMPS TuthillHD Series
Industrial Duty500 SSU / 108 Centipoise
0 psi / 0 bar 50 psi / 3.4 bar 100 psi / 6.9 bar 150 psi / 10.3 barSize RPM GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW
45 2.5 9 .5 .37 1.9 7 .5 .37 1.4 5 .5 .37 .9 3 .5 .37100 5.6 21 .5 .37 5 19 .5 .37 4.5 17 .75 .55 4 15 .75 .55
30A 155 8.8 33 .5 .37 8 30 .75 .55 7.5 28 1 .75 7 26 1 .75230 12.8 48 .5 .37 12.2 46 .75 .55 11.7 44 1.5 1.1 11.2 42 1.5 1.1350 19.5 74 .75 .55 18.5 70 1.5 1.1 17.9 68 2 1.5 16.8 64 2 1.545 6 23 1.5 1.1 5 19 1.5 1.1 4 15 1.5 1.1 3 11 1.5 1.1100 15 57 1.5 1.1 14 53 1.5 1.1 13 49 2 1.5 12 45 3 2.2
2A - 70A 155 23 87 1.5 1.1 22 83 2 1.5 21 79 3 2.2 20 76 5 3.7230 34 129 1.5 1.1 33 125 3 2.2 32 121 5 3.7 31 117 7.5 5.5350 52 197 2 1.5 51 193 5 3.7 50 189 7.5 5.5 49 185 10 7.545 13 49 1.5 1.1 11 42 1.5 1.1 9 34 1.5 1.1 7 26 2 1.5100 30 114 1.5 1.1 28 108 2 1.5 26 98 3 2.2 24 91 5 3.7
3A - 120A 155 46 174 1.5 1.1 44 167 3 2.2 42 159 5 3.7 40 151 7 5.5230 69 261 2 1.5 67 254 5 3.7 65 246 7.5 5.5 63 238 10 7.5350 105 397 3 2.2 103 390 7 5.5 101 382 15 11 99 375 15 1145 31 117 3 2.2 27 102 3 2.2 24 91 5 3.7 21 79 5 3.7100 70 265 3 2.2 66 250 5 3.7 63 238 7 5.5 60 227 7 5.5
330 155 108 409 3 2.2 105 397 7 5.5 102 386 15 11 99 375 20 15230 161 609 5 3.7 157 594 10 7.5 154 583 20 15 151 572 25 18.5350 246 931 7.5 5.5 242 916 15 11 238 901 25 18.5 234 886 30 2245 66 250 5 3.7 61 231 5 3.7 56 212 7.5 5.5 51 193 10 7.5100 147 556 5 3.7 142 537 7 5.5 137 519 15 11 132 500 20 15
600 155 228 863 5 3.7 223 844 15 11 218 825 25 18.5 213 806 30 22230 339 1283 10 7.5 334 1264 20 15 329 1245 30 22 324 1226 40 30350 516 1953 15 11 511 1934 30 22 - - - - - - - -
Standard Duty500 SSU / 108 Centipoise
0 psi / 0 bar 50 psi / 3.4 bar 100 psi / 6.9 bar 150 psi / 10.3 barSize RPM GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW
45 .38 1.4 .5 .37 .29 1.1 .5 .37 .2 .8 .5 .37 .12 .5 .5 .37100 .86 3.3 .5 .37 .77 2.9 .5 .37 .68 2.6 .5 .37 .6 2.3 .5 .37
5A 155 1.3 4.9 .5 .37 1.2 4.5 .5 .37 1.1 4.2 .5 .37 1 3.8 .5 .37230 1.9 7.2 .5 .37 1.8 6.8 .5 .37 1.7 6.4 .5 .37 1.6 6.1 .5 .37350 3 11.4 .5 .37 2.9 11 .75 .55 2.8 10.6 .75 .55 2.7 10.2 .75 .55575 4.9 18.5 .75 .55 4.8 18.2 .75 .55 4.7 17.8 1 .75 4.6 17.4 1.5 1.145 .64 2.4 .5 .37 .5 1.9 .5 .37 .37 1.4 .5 .37 .24 .9 .5 .37
100 1.4 5.3 .5 .37 1.2 4.5 .5 .37 1.1 4.2 .5 .37 1 3.8 .5 .3710 155 2.2 8.3 .5 .37 2 7.6 .5 .37 1.9 7.2 .5 .37 1.8 6.8 .5 .37
230 3.2 12.1 .5 .37 3 11.4 .75 .55 2.9 11 .75 .55 2.8 10.6 .75 .55350 5 18.9 .75 .55 4.8 18.2 .75 .55 4.7 17.8 .75 .55 4.6 17.4 .75 .55575 8.2 31 1 .75 8 30.3 1.5 1.1 7.9 29.9 1.5 1.1 7.8 29.5 1.5 1.145 1.1 4.2 .5 .37 .96 3.6 .5 .37 .73 2.8 .5 .37 .5 1.9 .5 .37
100 2.8 10.6 .5 .37 2.6 9.8 .5 .37 2.3 8.7 .5 .37 2.1 7.9 .5 .3716 155 4.4 16.7 .5 .37 4.1 15.5 .5 .37 3.9 14.8 .5 .37 3.7 14 .75 .55
230 6.6 25 .5 .37 6.3 23.8 .75 .55 6.1 23.1 .75 .55 5.9 22.3 .75 .55350 10 37.9 .75 .55 9.7 36.7 1 .75 9.5 36 1 .75 9.3 35.2 1.5 1.1575 16.5 62.5 1 .75 16.2 61.3 1.5 1.1 16 60.6 2 1.5 15.8 59.8 3 2.245 2.5 9 .5 .37 1.9 7 .5 .37 1.4 5 .5 .37 .9 3 .5 .37
100 5.6 21 .5 .37 5 19 .5 .37 4.5 17 .75 .55 4 15 .75 .5525A 155 8.8 33 .5 .37 8 30 .75 .55 7.5 28 1 .75 7 26 1 .75
230 12.8 48 .5 .37 12.2 46 .75 .55 11.7 44 1.5 1.1 11.2 42 1.5 1.1350 19.5 74 .75 .55 18.5 70 1.5 1.1 17.9 68 2 1.5 16.8 64 2 1.545 6 23 1.5 1.1 5 19 1.5 1.1 4 15 1.5 1.1 3 11 1.5 1.1
100 15 57 1.5 1.1 14 53 1.5 1.1 13 49 2 1.5 12 45 3 2.265 155 23 87 1.5 1.1 22 83 2 1.5 21 79 3 2.2 20 76 5 3.7
230 34 129 1.5 1.1 33 125 3 2.2 32 121 5 3.7 31 117 7.5 5.5350 52 197 2 1.5 51 193 5 3.7 50 189 7.5 5.5 49 185 10 7.545 11 42 1.5 1.1 10 38 1.5 1.1 9 34 1.5 1.1 8 30 1.5 1.1
125A 100 25 95 1.5 1.1 24 91 2 1.5 23 87 3 2.2 22 83 3 2.2& 155 38 144 1.5 1.1 37 140 3 2.2 36 136 5 3.7 35 132 5 3.7125H 230 57 216 2 1.5 56 212 5 3.7 55 208 7.5 5.5 54 204 7.5 5.5
350 87 329 3 2.2 86 326 7 5.5 85 322 15 11 84 318 15 11
• High viscosity• High pressure• Run dry without damage• High temperature• For metering or transfer• High vacuum• External bearing chamber• Slow speed for longer wear and lower shear• Reversible• Wide range of drives and mountings
WIL
LIAM
S RO
TOCA
NRotocan GEAR PUMP
Models
• RC 100 • RC 125• RC 150 • RC 200• RC 200 • RC 250• RC 300 • RC 400• RC 500 • RC 600• RC 601 • RC 800
RC SERIES
• RC - B1
• Cast iron construction with bronze bushing and packed gland
RS SERIES
RS - C2 •
316 stainless steel construction with carbon bushings •and teflon packed gland
Williams ROTARY PISTON PUMPS
• Pour produits à haute viscosité & corrosifs• For viscous & corrosifs liquids
• Asphalte liquide • Glucose• Liquid asphalte
• Acide sulfurique • Mélasse• Sulphuric acid • Molasse
• Peinture • Pâtes lourdes• Paint • Heavy paste
SD Pump
Disponible en fer, bronze ou acier •Available in iron, bronze or steel •
Rotor assembly • SD Pump
View of SD showing flow