atl.pdf

1
7 8 + _ Ro Ucc Tx Rx GND Konwerter RS232 Electrical diagrams Rt I + _ 1 2 3 WY WE 8 62 91 RAIL-MOUNTED TEMPERATURE TRANSMITTER TYPE ATL ? Programmable sensor type PT100 i Ni100 Programmable measuring range. Resistant thermoresistance line compensation ( 3 wire line) Output signal 4…20mA rail- mounting system. ? ? ? ? Application and function Technical data The temperature economical transmitter ATL is applicable to converting resistance of temperature sensor to standard current signal 4…20mA. Most of parameters such as: sensor type, input signal, measuring range may be adapted by user for specific requirements of his measuring system. The transmitter is programmed using PC with RS converter and Aplisens AT configuration software. If you define type of sensor, measuring range in the order, then the transmitter is programmed with required parameters and their values are printed on serial number label. Transmitter for rail mounting. Input signal Pt 100, Ni 100 Limit process 20Ώ <R<380Ώ Min. measuring range 10 Ώ Output signal 4 – 20 mA Power supply 10…36V DC Load resistance Ro[kΏ]<(Uz – 7V)/25mA Alarm signal 23mA or 3,8mA Accuracy for ΔR>20Ώ ± 0,2% Thermal error ± 0,1% / 10°C Ambient temperature -25…+80°C Error due to supply voltage changes ±0,1% Ordering procedure. ATL /___/__÷__°C/___ Sensor type:Pt100,Ni100 Alarm signal Measuring range Example: temperature transmitter ATL, sensor type Pt100, measuring range 0…100°C, alarm signal 23mA. ATL/Pt100/ 0…100°C/23mA Edition I/2007 APLISENS Ltd. tel. (+48-22) 814-07-77 fax (+48-22) 814-07-78, www.aplisens.pl, e-mail: [email protected] 03-192 Warsaw, 7 Morelowa Str. 50

Upload: vandall2

Post on 10-Jul-2016

213 views

Category:

Documents


1 download

TRANSCRIPT

7 8

+ _

RoUcc

TxRxGND

Konwerter

RS232

Electrical diagrams

Rt

I+

_1

23

WY

WE

8 62

91

RAIL-MOUNTED TEMPERATURE TRANSMITTER TYPE ATL

� Programmable sensor type PT100 i Ni100Programmable measuring range.Resistant thermoresistance line compensation( 3 wire line)Output signal 4…20mArail- mounting system.

Application and function

Technical data

The temperature economical transmitter ATL is applicable to convertingresistance of temperature sensor to standard current signal 4…20mA.Most of parameters such as: sensor type, input signal, measuring rangemay be adapted by user for specific requirements of his measuring system.The transmitter is programmed using PC with RS converter and AplisensAT configuration software.If you define type of sensor, measuring range in the order, then thetransmitter is programmed with required parameters and their values areprinted on serial number label.Transmitter for rail mounting.

Input signal Pt 100, Ni 100Limit process 20Ώ <R<380ΏMin. measuring range 10 ΏOutput signal 4 – 20 mAPower supply 10…36V DCLoad resistance Ro[kΏ]<(Uz – 7V)/25mAAlarm signal 23mA or 3,8mAAccuracy for ΔR>20Ώ ± 0,2%Thermal error ± 0,1% / 10°CAmbient temperature -25…+80°CError due to supply voltagechanges

±0,1%

Ordering procedure.

ATL /___/__÷__°C/___

Sensor type:Pt100,Ni100 Alarm signal

Measuring range

Example: temperature transmitter ATL, sensor type Pt100,measuring range 0…100°C, alarm signal 23mA.

ATL/Pt100/ 0…100°C/23mA

Edition I/2007

APLISENS Ltd. tel. (+48-22) 814-07-77fax (+48-22) 814-07-78, www.aplisens.pl, e-mail: [email protected]

03-192 Warsaw, 7 Morelowa Str.50