atmae accreditation · san jose state university administration mrs. caitlin schwab-falzone...

30
ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607 Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA) Board of Accreditation Chairman Mr. Glenn Rettig Owens Community College Directors Dr. Joyce Wilkerson, CSTM, CPT, CSSYB Ivy Tech Community College Mr. Charles Stevenson Louisiana Delta Community College Mr. Bob Dixon Walters State Community College Dr. Sami Ghezawi Pellissippi State Community College Dr. Marvin Sarapin Purdue University Dr. Nilesh Joshi Morehead State University Dr. Yuqiu You Ohio University Dr. Kamal Shahrabi, CSTM RIT Mr. Steve Dunn, CSTM, PMP Engineered Wire Products Dr. Ahmad Zargari Morehead State University Mr. Lance Welter Welter Associates Mr. Joshua Jones East Carolina University Dr. Fatemeh Davoudi Kakhki San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College 201 Community College Drive Baton Rouge, LA 70806 Dear Dr. Willie Smith: The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a two-year progress report (2021): Associate of Applied Science - Process Technology Please note the progress report will need to address the partial compliances for standards 13, 14, 15, and 18. The program will be eligible for ATMAE reaccreditation in 2023. We will send notices regarding future due dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited programs and of changes to the contact information for those handling ATMAE accreditation issues. We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards, Caitlin Schwab-Falzone Director of Accreditation

Upload: others

Post on 18-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Willie Smith Baton Rouge Community College 201 Community College Drive

Baton Rouge, LA 70806

Dear Dr. Willie Smith:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a two-year progress report (2021):

• Associate of Applied Science - Process Technology

Please note the progress report will need to address the partial compliances for standards 13, 14, 15, and 18.

The program will be eligible for ATMAE reaccreditation in 2023. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to

accredited programs and of changes to the contact information for those handling ATMAE accreditation

issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 2: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Faith Hensrud Bemidji State University 1500 Birchmont Dr NE Bemidji, MN 56601

Dear Dr. Faith Hensrud:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which the progress report on your ATMAE-accredited programs was among the reports reviewed by the Board of Accreditation. We are pleased to notify you that the Board accepted the report for the programs/options noted below:

• Bachelor of Applied Science - Applied Engineering

• Bachelor of Applied Science - Applied Management

• Bachelor of Science - Engineering Technology • Bachelor of Science - Project Management

o Construction and Facility Management

The programs will be eligible for ATMAE reaccreditation in 2023. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 3: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Dale Phersson Clarion University of Pennsylvania

800 Wood Street Clarion, PA 16214

Dear Dr. Dale Phersson:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a progress report due in two years (2021):

• Associates of Applied Science - Industrial Technology

The two year report will need to address partial compliances for standards 4, 5, 19 and a non-

compliance for standard 15. The program will be eligible for ATMAE reaccreditation in 2025. We

will send notices regarding future due dates. Meanwhile, it is the responsibility of each institution

to inform ATMAE of material changes to accredited programs and of changes to the contact

information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 4: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. William Seymour Cleveland State Community College 3535 Adkisson Drive PO Box 3570 Cleveland, TN 37320

Dear Dr. William Seymour:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a two-year progress report (2021):

• Associate of Applied Science - Engineering Systems Technology

• Associate of Applied Science - Electrical Engineering Technology

• Associate of Applied Science - Computer Information Technology

• Associate of Applied Science - Electromechanical Technology

• Associate of Applied Science - Mechatronics

Please note the progress report will need to address the partial compliances for standards 5,13, 14,15, 16, 18

and 19. The programs will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding

future due dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes

to accredited programs and of changes to the contact information for those handling ATMAE accreditation

issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 5: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Keith Snow-Flamer College of the Redwoods 7351 Tompkins Hill Road Eureka, CA 95501

Dear Dr. Keith Snow-Flamer:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a two-year progress report (2021):

• Associate of Science - Drafting and 3D Modeling

• Associate of Science - Construction Technology

• Associate of Science - Manufacturing Technology

• Associate of Science - CADD/CAM Design & Manufacturing

Please note the progress report will need to address the partial compliances for standards 13, 15, and 16.

The programs will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to

accredited programs and of changes to the contact information for those handling ATMAE accreditation

issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 6: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Ron Mitchelson East Carolina University

East Fifth Street Greenville, NC 27858

Dear Dr. Ron Mitchelson:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a progress report due in two years (2021):

Full Accreditation – No report due:

• Bachelor of Science – Design o Architectural Technology o Mechanical Technology

• Bachelor of Science - Industrial Distribution and Logistics

• Bachelor of Science - Industrial Engineering Technology

• Master of Science - Technology Management

Full Accreditation – Two year report due:

• Bachelor of Science - Industrial Technology o Architectural Design Technology o Bioprocess Manufacturing o Distribution and Logistics o Health Information Technology o Industrial Engineering Technology o Industrial Management o Information and Computer Technology o Mechanical Design Technology

• Bachelor of Science - Information and Computer Technology o Computer Networking o Information Technology o Information Security

• Master of Science - Network Technology o Digital Communications Technology o Computer Networking Management o Information Security o Web Technologies

The two-year report will only need to address partial and non-compliances for the programs indicated above.

The programs will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

Page 7: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 8: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Deborah Curtis

Indiana State University 650 Cherry Street John T. Meyers Bldg Rm TC201C Terra Haute, IN 47809

Dear Dr. Deborah Curtis:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which the progress report on your ATMAE-accredited programs was among the reports reviewed by the Board of Accreditation. We are pleased to notify you that the Board accepted the report for the programs/options noted below:

• Master of Science - Occupational Safety Management

• Master of Science - Electronics Engineering Technology

The programs will be eligible for ATMAE reaccreditation in 2023. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 9: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Sue Ellspermann

IVY Tech Community College – Indianapolis 3101 S Creasy Lane Indianapolis, IN 46208

Dear Dr. Sue Ellspermann:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a two-year progress report (2021):

Initial:

• Associate of Applied Science - Design Technology

Reaccreditation:

• Associate of Applied Science - Advanced Automation and Robotics Technology

• Associate of Applied Science - Automotive Technology

• Associate of Applied Science - Electronics & Computer Technology

• Associate of Applied Science - Heating, Ventilation & Air Conditioning

• Associate of Applied Science - Industrial Technology

• Associate of Applied Science - Machine Tool Technology

• Associate of Applied Science - Building & Construction Management

• Associate of Applied Science - BCTI - Construction Technology

• Associate of Applied Science - Diesel Technology

Please note the progress report will need to address the partial compliances for standard 10. The programs

will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due dates.

Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 10: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Jeff Sisk Jackson State Community College 2046 N Parkway Jackson, TN 38301

Dear Dr. Jeff Sisk:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a two-year progress report (2021):

• Associate of Science - Engineering Systems Technology

o Multi Skilled Maintenance Tech

Please note the progress report will need to address the partial compliances for standards 13 and 16. The

programs will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due dates.

Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 11: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 701 Exposition Place, Ste 206, Raleigh, NC 27615

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Don Killingsworth Jacksonville State University

700 Pelham Road North

Jacksonville, AL 36265

Dear Dr. Don Killingsworth:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following Bachelor of Science programs/options are granted ATMAE accreditation with a progress report due in two years (2021). The Master of Science program will require a two year follow up visit from the visiting team chair, Dr. Bob Chin, (2021):

• Bachelor of Science - Applied Electronics Engineering

• Bachelor of Science - Applied Manufacturing Engineering o Design & Automation o Manufacturing Management

• Bachelor of Science - Occupational Safety & Health Management

• Bachelor of Science – Industrial Leadership • Master of Science - Manufacturing Systems Technology

The two-year report will only need to address partial and non-compliances, and when it comes time to

schedule the two year follow up visit for the master of science program the ATMAE office will reach out

with instructions to schedule this visit. The programs will be eligible for ATMAE reaccreditation in 2024. We

will send notices regarding future due dates. Meanwhile, it is the responsibility of each institution to inform

ATMAE of material changes to accredited programs and of changes to the contact information for those

handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 12: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. W. Dennis Epps Louisiana Delta Community College 7500 Millhaven Road Monroe, LA 71203

Dear Dr. W. Dennis Epps:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with no further action:

• Associate of Applied Science - Drafting & Design Technology

• Associate of Applied Science - Industrial Technology

• Associate of Applied Science - Process Technology

The programs will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to

accredited programs and of changes to the contact information for those handling ATMAE accreditation

issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 13: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Michael Torrence Motlow State Community College 6015 Ledford Mill Road Tullahoma, TN 37388

Dear Dr. Michael Torrence:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a progress report due in two years (2021):

• Associate of Applied Science - Mechatronics Technology

The two-year report will only need to address partial compliances for standards 11 and 15. The program will

be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due dates. Meanwhile, it

is the responsibility of each institution to inform ATMAE of material changes to accredited programs and of

changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 14: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Bethany Flora

Northeast State Community College 2425 Highway 75 Po Box 246 Blountville, TN 37617

Dear Dr. Bethany Flora:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a progress report due in two years (2021): Reaccreditation:

• Associate of Applied Science - Electrical Technology o Electrical o Electromechanical

• Associate of Applied Science - Industrial Technology o Automotive Service o Engineering Design Technology o Machine Tool o Manufacturing Engineering Technology o Mechanical o Motor Sports o Welding/Metal Fabrication

• Associate of Applied Science -Computer Information Technology o Cyber Defense o Networking o Programming o Systems Administration and Management

Initial:

• Associate of Applied Science - Industrial Technology o Aviation Technology o Automotive Body/Collision Repair

• Associate of Applied Science - Entertainment Technology

o Entertainment Technology

The two-year report will only need to address partial compliances for standards 3, 13, and 16. The program

will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due dates. Meanwhile,

it is the responsibility of each institution to inform ATMAE of material changes to accredited programs and of

changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards, Caitlin Schwab-Falzone Director of Accreditation

Page 15: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Mr. Earl Meador Northwest Louisiana Technical Community College 9500 Industrial Drive Minden, LA 71055

Dear Mr. Earl Meador:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a two-year progress report and a follow up visit with the initial team chair will take place in 2021:

Initial:

• Associates of Science - Industrial Instrumentation and Electrical Technology

o Instrumentation components, controls, installation, and electrical components and

installations.

Please note the progress report will need to address the standards that the program received a partial

compliance. The program will be eligible for ATMAE reaccreditation in 2023. We will send notices regarding

future due dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes

to accredited programs and of changes to the contact information for those handling ATMAE accreditation

issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 16: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Tina Tinney

Nunez Community College

3719 Paris Road

Chalmette, LA 70043

Dear Dr. Tina Tinney:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a progress report due in two years (2021):

• Associate of Applied Science - Industrial Technology

The two-year report will only need to address partial compliances for standards 5, 10, 11,12,13,14,15,16,17

and 19.. The program will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future

due dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to

accredited programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 17: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Jane Bray Old Dominion University 228 Education Building Dean’s Office Norfolk, VA 23529

Dear Dr. Jane Bray:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which the progress report on your ATMAE-accredited programs was among the reports reviewed by the Board of Accreditation. We are pleased to notify you that the Board accepted the report for the programs/options noted below:

• Bachelor of Science - Occupational and Technical Studies

o Technical Construction

The programs will be eligible for ATMAE reaccreditation in 2021. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 18: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Hal L Hidgon Ozarks Technical Community College 1001 E Chestnut Expressway Springfield, MO 65802

Dear Dr. Hal L Hidgon:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a two-year progress report (2021):

Initial:

• Associate of Applied Science - Construction Technology

Please note the progress report will need to address the partial compliances for standards 3, 4, 10, 15, and 18

along with the non-compliances for standards 5 and 16. The program will be eligible for ATMAE

reaccreditation in 2023. We will send notices regarding future due dates. Meanwhile, it is the responsibility of

each institution to inform ATMAE of material changes to accredited programs and of changes to the contact

information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 19: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Anthony Wise

Pellissippi State Community College

10915 Hardin Valley Road

PO Box 22990

Knoxville, TN 37933

Dear Dr. Anthony Wise:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which the progress report on your ATMAE-accredited programs was among the reports reviewed by the Board of Accreditation. We are pleased to notify you that the Board accepted the report for the programs/options noted below:

• Associate of Applied Science - Engineering Technology o Automated Industrial Systems

• Associate of Applied Science - Engineering Technology o Sustainable Design

• Associate of Applied Science - Welding Technology

The programs will be eligible for ATMAE reaccreditation in 2023. Please also note I have been notified of the

changes to the program names and will make this update to the list of accredited programs on the ATMAE

website. We will send notices regarding future due dates. Meanwhile, it is the responsibility of each institution

to inform ATMAE of material changes to accredited programs and of changes to the contact information for

those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 20: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Thomas Keon

Purdue University Northwest 2200 169th Street Hammond, IN 46323

Dear Dr. Thomas Keon:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which the progress report on your ATMAE-accredited programs was among the reports reviewed by the Board of Accreditation. We are pleased to notify you that the Board accepted the report for the programs/options noted below:

• Bachelor of Science - Computer Graphics Technology

The programs will be eligible for ATMAE reaccreditation in 2023. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 21: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Arturo Reyes Rio Hondo College 3600 Workman-Mill Rd Whittier, CA 90601

Dear Dr. Arturo Reyes:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with no further action:

• Associate of Science - Alternative Fuels & Advanced Transportation Technology

• Associate of Science - Automotive Technology • Associate of Science - Honda Professional Automotive Career Training

o PACT

The programs will be eligible for ATMAE reaccreditation in 2024. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 22: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Dale Doty River Parishes Community College PO Box 2367 Gonzales, LA 70707

Dear Dr. Dale Doty:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a progress report due in two years (2021):

• Associates of Applied Science - Process Technology

• Associates of Applied Science - Industrial Instrumentation Technology • Associates of Applied Science - Drafting a& Design Technology

The two-year report will only need to address partial compliances for standards 5, 10, 11,13,14,15,16,17, and

18 and the non-compliance for standard 19. The programs will be eligible for ATMAE reaccreditation in 2025.

We will send notices regarding future due dates. Meanwhile, it is the responsibility of each institution to inform

ATMAE of material changes to accredited programs and of changes to the contact information for those

handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 23: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Natalie Harder South Louisiana Community College 1101 Bertrand Drive Lafayette, LA 70506

Dear Dr. Natalie Harder:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with no further action:

• Associate of Applied Science - Civil, Survey & Mapping Technology

• Associate of Applied Science - Drafting & Design Technology

• Associate of Applied Science - Industrial Electronics Technology • Associate of Science - Industrial Technology

The programs will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 24: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. John Crain Southeastern Louisiana University PO Box 10847 Hammond, LA 70402

Dear Dr. John Crain:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with no further action:

• Associates of Science - Industrial Technology o Construction Technology o Design Drafting o Supervision o Occupational Safety, Health, and Environment

• Bachelor of Science - Industrial Technology o Automated Systems o Drafting Design o Supervision

The programs will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 25: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Terisa Riley University of Arkansas – Fort Smith 5210 Grand Avenue Fort Smith, AR 72904

Dear Dr. Terisa Riley:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a progress report due in two years (2021):

Initial Accreditation:

• Bachelor of Science - Electrical Engineering Technology

Reaccreditation:

• Associates of Applied Science - Office Management Technology o Office Management o Medical Office Professional

• Associates of Applied Science - Computer Graphic Technology o Architectural Technology o Digital Design o General o Mechanical

• Associates of Applied Science - Electronics Technology

• Associates of Applied Science - General Technology o Automotive Technology o Welding Technology

• Associates of Applied Science - Workforce Leadership

• Bachelor of Science - Applied Science

• Bachelor of Science - Animation Technology • Bachelor of Science - Organizational Leadership

The two-year report will only need to address partial and non-compliances for each program. The programs

will be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due dates. Meanwhile,

it is the responsibility of each institution to inform ATMAE of material changes to accredited programs and of

changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 26: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Lawrence B. Alexander University of Arkansas – Pine Bluff 1200 North University Drive Pine Bluff, AR 71601

Dear Dr. Lawrence B. Alexander:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following program/option are granted ATMAE accreditation with a progress report due in two years (2021):

• Bachelor of Science - Industrial Technology Management & Applied Engineering

The two-year report will only need to address partial compliance for standards 4, 10, and 11. The program will

be eligible for ATMAE reaccreditation in 2025. We will send notices regarding future due dates. Meanwhile, it

is the responsibility of each institution to inform ATMAE of material changes to accredited programs and of

changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 27: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Renu Khator University of Houston 4800 Calhoun Rd Houston, TX 77204

Dear Dr. Renu Khator:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a progress report due in two years (2021):

• Bachelor of Science - Biotechnology

• Bachelor of Science - Supply Chain and Logistics • Bachelor of Science - Leadership and Supervision

The two-year report will only need to address partial compliances for standards 1 and 11, and the non-

compliance for standard 10 for all programs. The programs will be eligible for ATMAE reaccreditation in 2025.

We will send notices regarding future due dates. Meanwhile, it is the responsibility of each institution to inform

ATMAE of material changes to accredited programs and of changes to the contact information for those

handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 28: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Michael Tidwell University of Texas at Tyler

3900 University Blvd

Tyler, TX 75799

Dear Dr. Michael Tidwell:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with no further action:

Reaccreditation:

• Bachelor of Science - Industrial Technology

Initial:

• Master of Science - Industrial Management

The programs will be eligible for ATMAE reaccreditation in 2024. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 29: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Tony Miksa Walters State Community College 500 S Davy Crockett Pkwy Morristown, TN 37813

Dear Dr. Tony Miksa:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which your request for programmatic accreditation was among those considered. We are pleased to notify you that the following programs/options are granted ATMAE accreditation with a two-year progress report (2021):

• AAS in Electrical Engineering Technology

o Automation specialization

o Biomedical Equipment specialization

o Electromechanical specializations

• AAS in Engineering Systems Technology

o Advanced Manufacturing specialization

o Operations Management specialization

o Architectural Design specialization

o Mechanical Design specialization

Please note the progress report will need to address the partial compliances for standards 11,13, 14,15, 16,

and 18. The programs will be eligible for ATMAE reaccreditation in 2024. We will send notices regarding

future due dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes

to accredited programs and of changes to the contact information for those handling ATMAE accreditation

issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation

Page 30: ATMAE Accreditation · San Jose State University Administration Mrs. Caitlin Schwab-Falzone Director of Accreditation November 26, 2019 Dr. Willie Smith Baton Rouge Community College

ATMAE Accreditation 3801 Lake Boone Trail, Ste 190, Raleigh, NC 27607

Phone 919-635-8335 Fax 919-779-5642 Email: [email protected] Visit: www.atmae.org Recognized by the Council for Higher Education Accreditation (CHEA)

Board of Accreditation

Chairman

Mr. Glenn Rettig Owens Community College Directors

Dr. Joyce Wilkerson, CSTM, CPT, CSSYB

Ivy Tech Community College

Mr. Charles Stevenson

Louisiana Delta Community College

Mr. Bob Dixon

Walters State Community College

Dr. Sami Ghezawi

Pellissippi State Community College

Dr. Marvin Sarapin

Purdue University

Dr. Nilesh Joshi

Morehead State University

Dr. Yuqiu You

Ohio University

Dr. Kamal Shahrabi, CSTM

RIT

Mr. Steve Dunn, CSTM, PMP

Engineered Wire Products

Dr. Ahmad Zargari

Morehead State University

Mr. Lance Welter

Welter Associates

Mr. Joshua Jones

East Carolina University

Dr. Fatemeh Davoudi Kakhki

San Jose State University

Administration

Mrs. Caitlin Schwab-Falzone

Director of Accreditation

November 26, 2019

Dr. Martin Abraham

Western Illinois University 1 University Circle Sherman Hall 209 Macomb, IL 61455

Dear Dr. Martin Abraham:

The ATMAE Board of Accreditation conducted hearings on Wednesday November 6, 2019 at which the progress report on your ATMAE-accredited programs was among the reports reviewed by the Board of Accreditation. We are pleased to notify you that the Board accepted the report for the programs/options noted below:

• Bachelor of Science - Construction Management • Bachelor of Science - Engineering Technology

The programs will be eligible for ATMAE reaccreditation in 2020. We will send notices regarding future due

dates. Meanwhile, it is the responsibility of each institution to inform ATMAE of material changes to accredited

programs and of changes to the contact information for those handling ATMAE accreditation issues.

We hope that the accrediting services provided by ATMAE have been beneficial to your program and we look forward to your organization’s participation in the development, implementation and evaluation of the appropriate standards for our profession. Regards,

Caitlin Schwab-Falzone

Director of Accreditation