attachment information sheets - cherry products

Overview The Cherry range of Manure/Silage Forks are purpose

built to suit your materials handler, ensure the correct angles of use. Priding ourselves in customer service, we can build your Fork to suit your application. For instance, for Silage work as about our longer tines and weldmesh back. Or for mucking out, we can supply with Hardox Tines and a fully plated back.

Features Tine Options, to suit your application, we offer a choice of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the frame. Options for double side tines also available. Fork Back, As standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated, the whole fork back plated or a full weldmesh finish for Silage applications Brackets, Integral to the design and strength of the fork

Specification

Manure/Silage Forks

Tel – 01608 678 197

Fax – 01608 677 778

Email – [email protected]

Website – www.cherryproducts.co.uk

CF01K

CF01HD w/ infilled middle CF01HD w/ infilled middle

CF01HD w/ weldmesh back

CF01KW w/ spill guard

CF01HD

Overview The Cherry fork and power grab range starts at 6'6'' and goes right up to 8'. The fork frame is built with strength in

mind with a tough box section 'denture' to take one of the three tine types we offer. The twin rams run inline with the Handler brackets to ensure even power distribution.

Features Tine Options, to suit your application, we offer a choice

of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the frame. Fork Back, As standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated or the whole fork back plated Wide Opening Grab, allows up to 2 rectangular bales to be transported Brackets, Integral to the design and strength of the grab

Specification

Fork and Power Grabs

Tel – 01608 678 197

Fax – 01608 677 778



Overview The CF02 range uses our renowned base fork design with a durable box section frame and tubing back

which allows the user a full view of the operation. As with all of our forks, a variety of tines can be used including Kvernaland style, 2 inch round tines and Hardox style tines. The grapple on top is profile cut, working on a twin ram system. With a wide opening, the CF02 is suitable for a variety of applications.

Features Tine Options, to suit your application, we offer a choice of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the frame. Fork Back, As standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated or the whole fork back plated Bolt on Top Grapple, easily removable to allow use as standard manure fork

Specification

Fork and Top Grabs

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry CF06 range of fork and grabs are the ideal attachment for users who want a compact, but heavy

duty grab for their 2-3 tonne machine. Simile to its bigger counterpart, the CF07, the CF06 utilises high capacity rams, high grade pins & a wide open grab to give users a reliable attachment for a multitude of jobs.


of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the frame. Fork Back, As standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated or the whole fork back plated Grab Stops, are fitted for the opening and closing of the grab to protect the hydraulic cylinders Brackets, integral to design and strength of attachment Wide Opening Grab, 1520mm vertical height

Specification

CF06 Fork and Grabs

Tel – 01608 678 197

Fax – 01608 677 778



CF06K w/ full plate back

CF06HD w/ infilled middle

CF07K w/ infilled middle

CF06KW

CF06K

CF06K w/ full plate back

Overview The Cherry CF07 range of fork and grabs are the power houses of all grabs available on the UK market, built

specifically to meet the demanding needs of 3 tonne machines. With hydraulic cylinders taken from the tough 4 in 1 bucket, and 38mm cylinder and pivot pins, the CF07 range is British built to a quality you can trust.


of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the frame. Fork Back, As standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated or the whole fork back plated Grab Stops, are fitted for the opening and closing of the grab to protect the hydraulic cylinders Brackets, Integral to design and strength of attachment Wide Opening Grab, 1760mm vertical height

Specification

CF07 Fork and Grabs

Tel – 01608 678 197

Fax – 01608 677 778




CF07HD w/ infilled middle

CF07HDW



CF07HDW w/ full plate back

Overview The Cherry CF08 range of fork and grabs are the ultimate grabs on the UK market for larger Telehandlers. This robust attachment is built specifically to meet the demanding needs of 4 tonne machines. With hydraulic cylinders taken from the tough 4 in 1 bucket, and 38mm

cylinder and pivot pins, the CF08 range offers the highest possible service for agricultural applications.

Features Tine Options, to suit your application, we offer a choice of KV Style, Hardox or 2’’ round base tines and KV Style or Hardox Grab tines. All KV Style tines are bushed in the

frame. Fork Back, As standard built with ‘tube style’ for maximum strength and visibility. However, we can build with the middle plated or the whole fork back plated Grab Stops, are fitted for the opening and closing of the grab to protect the hydraulic cylinders Brackets, Integral to design and strength of attachment Wide Opening Grab, 1890mm vertical height

Specification

CF08 Fork and Grabs

Tel – 01608 678 197

Fax – 01608 677 778



CF08KW CF08KW

CF08HD CF08K w/ infilled middle

CF08KW CF08HD w/ infilled middle

Overview Designed for large horsepower tractors, the CF05 range is built with durability in mind and proves very popular for it's reliability and strength. The large gate push off is built with high grade weldmesh to ensure maximum

push, and the 'hollow' back style means a better view of the application is allowed. As standard the Buck Rake comes with Bracket or Three Point Linkage, Flow and Control Valve, and Four Side Tines.

Features Weldmesh Gate, Made from high grade EXP mesh,

providing maximum strength across the buck rake Flow Valve, ensures even power distribution Heavy Wall Frame, designed to withstand the toughest of conditions at maximum weight Tine Choice, Hardox, KV Style, 2’’ Round or Spoon end

Specification

Push Off Buck Rakes

Tel – 01608 678 197

Fax – 01608 677 778



Overview Built for Loading Shovels, our range of folding forks are

designed to allow for greater silage loads whilst also providing a safer option for transporting the fork on roads. Models available allow for a 14' opening width, closing down to 8'.

Features Folding Wings, hydraulically close or open, altering the overall width from 14ft to 8ft. Allows safer road transport Manual Locking Wings, lock in the closed position for transport Wing Stops, on open and close for ram protection Pivot Pins, 50mm DIA high grade material for long term reliability Base Tines, 1400mm Hardox tines welded in fork base Side Tines, all models come as standard with double KV

Style side tines Main Frame, bottom box made from heavy wall 200 x 100 box Fork Back, available as standard with tube style for maximum strength and visibility or a plated middle to protect the machine’s headstock Hydraulic Accumulator, available as an optional extra. Acts as shock absorber protection for rams and wings Tine Guard, available as an optional extra. Covers the

tines for road transport

Specification

Folding Forks

Tel – 01608 678 197

Fax – 01608 677 778



Overview With over 30 years of design behind it, the Cherry range of Rehandling Buckets have proven their popularity and worth over years of production. Designed to maximise the working angles, the Bucket is built

specifically to suit your handler. A host of extras can be added to suit your application, ranging from Bolt On Leading Edges, to Spill Guards.

Features Support Straps, 150 x 12mm run continuously around/across the bucket

Side Stiffeners, 80 x 12mm down either side Leading Edge, protects against undue wear and tear and acts as a main strengthening component Bucket Angle, purpose built to suit your machine for maximum crowd and dump.

Specification

Rehandling Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry range of Grain Buckets offers a solution to your grain handling needs, by maximising the capacity of your machine, ensuring efficient loading times. Each bucket is built specifically for your machine to ensure

maximum crowd and dump angles can be achieved.

Features Integral Spill Guard, every Bucket is designed with an internal spill guard, reducing the chance of grain spilling when in transit Floor Length , our Grain Buckets have a longer floor

which allows for a level fill when crowding back Support Straps, are set at the width your mounting bracket for continuous strength around the bucket Toe Plate, included as standard on all buckets Bucket Angle, purpose built to suit your machine

Specification

Grain Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry Heavy Duty Digging bucket matches the profile and shape of the Rolled Rehandling Bucket but it is built to a much higher specification. Where our standard buckets are made from 5mm plate, this

digging bucket is made from 6mm, has full length side gussets, 130 x 12mm heavy duty side stiffeners and extra wear plates on the underside. There is also an option for digging teeth, or a bolt on leading edge.

Features Support Straps, 150 x 12mm run continuously around/across the bucket Side Gussets, full length, adds strength whilst protecting against material sticking Side Stiffeners, 130 x 12mm ultra heavy duty down either side Leading Edge, protects against undue wear and tear, bolt on reversible Rolled Profile, reduces amount of material able to stick

to the back of the bucket

Specification

HD Digging Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry Multi Purpose Bucket is designed to offer long term reliability for host of applications such as mucking out and moving straw etc. Keeping with the increased capacities of modern machines, the Bucket’s Grab is based on our ultra Heavy Duty Waste Bucket Claw.

Features Tine Choice, profile cut or KV style. The benefit of KV style being they are quick and easy to replace Side Panels, bolted in and such can be removed for applications which require extra bucket capacity Toe Plate, bolt on, double bevel, reversible Rams, taken from our 4 in 1 bucket, high capacity for

long term reliability Pins, high grade, 38mm DIA. Retaining bolt to prevent pin from turning Grab Stops, on opening and closing of grab to protect Hydraulic Cylinders and Cylinder Pins Wide Opening Grab, from 1460mm from tine tip to toe plate

Specification

Multi Purpose Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview The new Cherry Waste Bucket w/ Claw range has been redesigned from the ground up for 2013. Working closely with our customers to come up with a product that improves in everyway from it's predecessor, the

new range also offers a host of extras to ensure it's right for your application. Improvements from the last model see the new design incorporate bigger pins, higher capacity cylinders, greater grab supports and more ram protection.

Features Ram Stops, Protect the ram from over extension of grab

High Grade Pins, 38mm DIA with retaining bolt

Support Straps, 150 x 12mm run continuously around/across the bucket Side Stiffeners, 80 x 10mm down either side Leading Edge, bolt on protects against undue wear and tear across the front edge. Weld on across the grab tines Optional Extras, for your application we offer removable side panels, ram box protection, and spill guards that incorporate the hoses

Specification

HD Waste Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview Our range of Toe Tip Buckets allow for a greater height of tip which benefits some applications which use high sides trailers for instance. Design is based upon a large,

high capacity ram which enters the bucket through a box section/stepped floor design. The Bucket itself is built with our normal strengthening designs, whilst the angles allow for maximum tip to be achieved.

Features High Capacity Ram, Single or Double depending on the model of the machine High Stroke Cylinder, Allows for decreased load cycles, higher load outputs Support Straps, run continuously around bucket from toe plate to roof Bucket Angle, purpose built to suit your machine for maximum crowd and dump.

Specification

Toe Tip Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry 4 in 1 Bucket is built with tried and tested materials, upon a heavy duty design for use in a variety of applications. Manufactured as standard with 3 wear plates and protected heavy duty rams, serrated edges can also be added free of charge. The Product and can be used as a Bucket, Grader, Clamp and a Digger.

Features Serrated Edges, aid in the clamping of material High Capacity Cylinders, suitable for the variety of applications the bucket can be used for Leading Edge, supplied with a bolt on edge or digging teeth as standard to your choice

Weld on Edges, 3 on the attachment as standard, across each contact point Bucket Angle, purpose built to suit your machine for maximum crowd and dump

Specification

Four in One Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry Root Crop Bucket has 25mm round bars in the front and on the back. The standard spacing of these bars is 100mm centre to centre which gives 75mm gaps. Bar spacing can be adjusted to suit

individual requirements. To reduce damage to the crop, a round bar is also welded to the edge of the bucket, but we can supply without this, or with a level front edge, depending on your requirements.

Features Round Tubes, and round edges on all outward facing edges to protect the crop Central Gussets, run parallel with the main support straps for maximum strength Support Straps, run continuously around bucket from toe plate to roof Bucket Angle, purpose built to suit your machine for maximum crowd and dump.

Specification

Rootcrop Buckets

Tel – 01608 678 197

Fax – 01608 677 778



Overview All products in our Bale Spike Range are based on the same Heavy Duty principal design, with a durable box section frame, Kverneland style tines and tine bushes. Brackets are included on all models. If you require extra bushes in the frame work, or special tine configurations, just ask. We manufacture all of our Bale

Spikes in our Oxfordshire Factory, so specials are welcomed.

Features Tines, 980mm & 680mm, bushed in the main frame Brackets, integral to the strength and design of the attachment. Make up the main framework.

Extensions, the CH27AE & CH27BE have an adjustable extension which can be extended or retracted according to the number of bales you wish to move

Specification CH27 – 1 x Round Bale CH27A5 – 2 x 5ft Round Bales

CH27A6 – 2 x 6ft Round Bales CH27B – 1 x Rectangular Bale CH27BE – 3 x Stacked Rectangular Bales CH27AE – 3 x Round Bales / 3 x Rectangular Bales We offer folded tine options where the tines can pivot upwards and lock. Ideal for transporting the spike.

Bale Spikes

Tel – 01608 678 197

Fax – 01608 677 778



CH27 CH27A5

CH27AE CH27B

CH27BE CH27B/FT

Overview Our Bale Handling range is built specifically to suit your

existing bale sizes. We use proven bale claws which work in unison for a trustworthy pick up. Our standard range is made up of the models below, but we can accommodate any bale size you may have. If you would like any further information on our bale grab range or compatibility options, please contact our sales office. As with every products the Cherry Products manufacture, Brackets and Pipework are included as standard.

Features Claws, casted rather than profile cut – helps reduce the chance of breaking bale strings Brackets, integral to the strength and design of the attachment. Make up the main framework. Ram(s), whether single or double, allow the tines to enter bale simultaneously for secure pick up Guide Rail, can be fitted both sides. Allows tight stacking of bales

Specification CH25 – 8 x Conventional Bales (Flat 8) CH25A – 10 x Conventional Bales (Flat 10)

CH26 – 2 x 800mm Bales / Flat 8 CH26LB – 2 x 1200mm Wide Bales CH26B – 3 x 800mm Wide Bales CH26BLB – 3 x 1200mm Wide Bales

Flat Bale Grabs

Tel – 01608 678 197

Fax – 01608 677 778



CH26B

CH26 CH25 Special

CH26BLB CH25A

CH25

Overview The CHW2 is designed to work on wrapped and unwrapped bales. It's popular 'elephant trunk' over arm design can be used on both square and round bales, with a high stroke hydraulic cylinder allowing its versatility. Its design allows an easy and quick stacking

option as well as the reduction in bag tears. We also offer the option to have two over arms which allows 2 wrapped bales to be grabbed. A pressure relief valve is fitted as standard on all models.

Features High Stroke Cylinder, increases the spread size of bales

which can be picked up CHS Contact Points, Reduce the chance of wrapping tears whilst maintaining strength Over Arm Design, allows for compact side to side stacking of bales Brackets, integral to the design and strength of the grab, fitted as standard on all models Specials, We always welcome bespoke request, such as our double arm version for 2 x wrapped round bales

Specification Open Centres – 1985mm Closed Centres – 600mm Weight – 230kgs Capacity – 1 x Round Bale (Wrapped or Unwrapped) 1 x Square Bale (Wrapped)

Over Arm Bale Grabs

Tel – 01608 678 197

Fax – 01608 677 778



Overview The CHW3 can be used on both wrapped and

unwrapped bales. The 'paddle‘, large plated arms work on a side squeeze system, allowing ease of use on square and round bales. A pressure relief valve is fitted as standard. The Arms have tube CHS which adds strength but also reduces the chance of bag tears. The arm design makes for a quick and accurate solution for bale stacking.

Features Spill Frame, prevent bales falling back over the grab CHS Frame, Circular hollow section arms prevent wrapped tears whilst maintaining strength Parallel Closing, allows for unrivalled ease of stacking, precision and time efficiency Brackets, integral to the design and strength of the grab, fitted as standard on all models

Specials, we are the manufacturers, so if you want a special to suit your application, just ask. Clean Frame, the back frame and any contact points are designed to not have any points wear wrapping can tear

Specification Open Centres – 1940mm Closed Centres – 1025mm Weight – 410kgs Capacity – 1 x Round Bale (Wrapped or Unwrapped) 1 x Square Bale (Wrapped)

Side Arm Bale Grabs

Tel – 01608 678 197

Fax – 01608 677 778



Overview Our CH30 bale grab combines the best elements of a Bale Spike and a Bale Squeeze to offer a heavy duty, versatile attachment for a variety of applications. Using a 'roller' system, the grab can be used for wrapped bales, with the rollers, large flat face and domed ends to protect the bale wrapping. A single hydraulic cylinder squeezes the bale to ensure quick and easy stacking. By simply removing the rollers, 2 x KV style tines

make the attachment a double bale spike with the hydraulic cylinder preventing the bales from spinning.

Features Roller Sleeves, Sit over tines to protect bale wrapped whilst allowing tight bale grip Large Flat Face, gives a solid backing for the bale to rest against whilst also offering wrapping protection Spill Frame, protects bales from falling over the grab Brackets, integral to the design and strength of the grab, fitted as standard on all models Tines, When needed as a bale spike, simply remove the roller sleeves and operate the tines accordingly

Specification Open Centres – 1300mm Closed Centres – 700mm Weight – 265kgs Capacity – 1 x Round Bale (Wrapped) 2 x Round Bales (Unwrapped)

Sleeved Arm Bale Grab

Tel – 01608 678 197

Fax – 01608 677 778



Overview The CH28 is designed to pick up 40-48 bales, working on a twin ram system. It has a heavy duty box section frame, pressure release valve, and manoeuvrable supports on the bottom sections. Its frame allows Bales

to be stacked easier and quicker. As standard, we manufacture with a strip across the top frame which aids as a spill guard when the bales are in transit.

Features Pivoting Arms, adjust to position of bales, ensuring tight

grip without breaking the bale Spill Rail, protects against bales spilling over the top of the attachment when in transit Arm Design, as narrow as possible, whilst maintaining strength. Allows tight stacking of bales. Brackets, integral to the design and strength of the grab, fitted as standard on all models Parallel Close, Arms close parallel to each other, keeping bales totally inline

Pressure Relief Valve, as standard on all models. Pre set at a setting to ensure a tight bale grip whilst protecting the attachment against the heavy pressures of modern machines

Specification Open Centres – 2345mm

Closed Centres – 1531mm Weight – 380kgs Capacity – 40 x Conventional Bales

40 Bale Grab

Tel – 01608 678 197

Fax – 01608 677 778



Overview We have a host of Pallet Fork Carriages to suit a variety

of Pallet Forks and Machines. For industrial type pallet forks, our CP39 and CP40 carriages are available. For Forks which fit over a fixed bar E.G Merlo Forks, we have our CP32 and for Forks that fit on a floating bar E.G JCB Forks, we have our CP41. All Pallet Fork Carriages come with Brackets as standard.

Features Spread, all of our carriages are as wide as possible, allowing a wide spread of the forks Strength, built to the highest standards, our carriages are built to maintain as much as the machine’s lift capacity as possible Quick and Simple, built with brackets as standard, our carriages can be easily detached when you want to use an attachment

Compact, designed and built to be as compact as possible to your machine, helping to keep your load centres as close as possible Specials, we are the manufacturers, if you want extra width, or anything slightly different, just ask

Specification CP39 – 2T Capacity – 16’’ between rails CP40 – 4T Capacity – 20’’ between rails CP32 – 3.5T Capacity – Fixed Bar for Merlo Type Forks CP41 – 3.5T Capacity – Floating Bar for JCB Type Forks

Pallet Fork Carriages

Tel – 01608 678 197

Fax – 01608 677 778



CP39 CP40

CP32 CP41

CP40 & Tines CP32 Special

Overview The Bag Lifter's we offer are specifically designed to offer a safe option for lifting. The box section frame is deep in the back with a base cross section to minimise the risk of tearing the bags, and the arms are at a distance which reduces the swing of the bag when in transit. The arms also incorporate a unique stopping block, which allows bags to slide on easily, but reduces the chance of them sliding off when the headstock is dumped. Our CDB01 is designed to carry 2 x 1000kg

bags, the CQB01 will carry 4 x 600kg bags.

Features Stopping Blocks, prevent bags from accidently sliding off of the end of the arms Swing Protector, prevents bags from swinging when in transit and subsequently not splitting

Arms, built at a length & spacing for easy stacking Brackets, integral to the design and strength of the Bag Lifter Support Gussets, run under main arms to provide extra strength

Specification Arm Length – 1540mm Arm Centres – CQB01 = 880mm, CDB01 = 1080mm Height – 1080mm Capacity – 2500kgs Frame – Heavy wall box section

Big Bag Lifters

Tel – 01608 678 197

Fax – 01608 677 778



Overview Our Hydraulic Adjustable Bag Lifter is the most versatile Bag Lifter available on the UK market. A single hydraulic cylinder allows you to adjust the arm centres from the comfort of the cab, ideal if you use a mixture of 600kg and 1000kg bags.

Features Stopping Blocks, reduce chance of bags accidently sliding off of the end of the arms Swing Protector, prevents bags from swinging when in transit and subsequently not splitting Ram Stops, protect the hydraulic cylinder but ultimately

allow for perfect spacing for 600kg and 1000kg bags Arms, built at a length and strength to carry either 4 x 600kg bags or the larger 2 x 1000kg bags Brackets, included on all models as standard. Integral to the design and strength of the attachment

Specification Arm Length – 1540mm Arm Centres – Variable from 880mm to 1080mm Weight – 250kgs Height – 1080mm Capacity – 2500kgs Frame – Heavy wall box section Brackets – Suitable for your Machine

Adjustable Bag Lifters

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry Grain Pusher range is built on a heavy

duty box section frame with cross support sections for further strength. Comes as standard with Brackets to fit your Telehandler or Loader. The large, folded 7ft Blade is made of durable plate with extra reinforcing across the leading edge. A Rubber Edge (CPRE) can be added to the Grain Pusher for extra protection for use on wooden floors.

Features Large Blade Face, 7ft wide, designed to reduce grain spilling over the top of the Pusher Angled Brackets, allow the user to crowd the Pusher further back, keeping it closer to the machine when in transit Frame Options, heavy wall box section frame. We also offer various frame options, ideal if you are concerned about grain sitting on top of the Pusher.

Specification

Grain Pushers

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry Safety Access Platform range includes some

of the most popular models on the UK agricultural market, due to their conformity with HSE regulations and heavy duty build quality. All models come as standard with brackets or tine fixing (to your choice) and have a self closing access gate.

Features To comply with HSE regulations (pm28), the Cherry range of platforms include;- Complete kick boards Weldmesh back (at the headstock width) Harness points Non slip chequer plate floor Brackets or tine fixing – Self closing access gate – Full safety instructions (including stickers) & a certificate of incorporation

Specification

Access Platforms

Tel – 01608 678 197

Fax – 01608 677 778



Overview Bracket or Three Point Linkage mounted, we offer 2 base models in our Snow Plough Attachments. The CSP80 range is aimed at the Telehandler/Loader market, whilst the CSP100 range is for large horsepower

Tractors. All models can be manufactured at a fixed or adjustable angle(hydraulic and manual options) and with, or without, adjustable height wheels.

Features Plough Angle, set at 20deg to the left on fixed models.

Allows snow to fall freely away to the side of the plough Adjusting the Plough angle, hydraulic or manual options Rubber Edge, hard wearing, standard on all models Models for all, whether you want to clear your drive only, or take the plough to the road, we have models to suit all applications and budgets Wheels, as an optional extra, our wheels are made for work, not the trolley type seen on some Snow Ploughs.

Specification

Snow Ploughs

Tel – 01608 678 197

Fax – 01608 677 778



Because we build all models to order, we can manufacture at any width to suit your machine and requirements.

Overview A Cherry Adaptor Plate can be the perfect solution if your attachments have various bracket types. For example, if you have a machine with a Pin and Cone Headstock, and some of your attachments have pin and cone brackets, but others have Manitou, a Pin and

Cone/Manitou Adaptor Plate will solve the problem.

Features Locking Options, hydraulic or manual available. With manual locking we can offer a push through locking pin or over centre locking. Angles, built to maximise the crowd and dump

potential of your machine and attachments Utilising Pallet Forks, when available, we can offer builds that will allow you to carry your new machine’s Pallet Forks Compact, we build our adaptor plates as compact as possible, thus keeping your load centres as close to the machine as we can Finish, we can offer a variety of paint finishes to suit your machine

Specification Hydraulic Locking, Single or Double hydraulic locking cylinders depending on combination. Manual Locking, as standard all models fitted with single push through locking pin. Over centre locking handler options available on some combinations

Adaptor Plates

Tel – 01608 678 197

Fax – 01608 677 778



Overview If you are being a new or used machine but the headstock doesn’t match your attachment brackets, we can help. We convert hundreds of headstocks each year to suit customers requirements e.g. If you are

buying a Merlo machine, but have Pin and Cone brackets on your attachments, we can convert the Merlo headstock so it will still fit your Merlo machine but now pick up Pin and Cone Attachments.

Features Locking Options, hydraulic or manual available. With manual locking we can offer a push through locking pin or over centre locking. Angles, built to maximise the crowd and dump potential of your machine and attachments Utilising Pallet Forks, when available, we can offer builds that will allow you to carry your new machine’s Pallet Forks Experience, we are the UK’s leading headstock

converter, come to us for the knowledge and expertise Finish, all headstocks will be returned in the correct paint livery to suit your machine

Specification

Headstock Conversions

Tel – 01608 678 197

Fax – 01608 677 778



Overview The Cherry Weight/Tool box is available for any front tractor linkage. There are two models in the range; the CBB900 which has a 3000kg potential weight and the CBB420 which has a potential weight of 2000kg. As standard the boxes come with Cat 2 Linkage, Gas Strut Lid, and a Rubber Matting Floor. Optional extras include LED side markers, Water Storage Containers, Steel Weight Slabs and Cat 3 Linkage. Paint options are available to suit your machine livery. The side pods are

ideal for ballasting with either concrete or steel slabs.

Features Total Size, 1800m wide x 850mm high x 625mm deep Large Storage Space, 1000mm wide x 475mm high ideal for transporting your tool box, water containers Pad Lock Point, keep your items safe in the weight/tool

box Linkage, Cat 2 or 3 to suit your machine Compartments, suitable to be ballasted with concrete for weight, or we can supply with steel blocks Specials, purpose built to suit your machine, we can manufacture to suit your exact needs Colour, we have a host of colours and finishes to suit your machine

Specification

Weight/ Tool Boxes

Tel – 01608 678 197

Fax – 01608 677 778



attachment information sheets - cherry products

Documents