Attia, H.A., “Limiting behaviour of the magnetohydrodynamic flow due to a rotating disk of infinite or finite extent”, M.Sc. Thesis, Department of Engineering Mathematics and Physics, Faculty of

Engineering, Cairo University, Egypt, 1988.

El-Mistikawy, T.M.A. and Attia, H.A., "The rotating disk flow in the presence of strong magnetic field", Proceedings of the Third International Congress of Fluid Mechanics (ICFM3), Virginia

Polytechnic Institute and State University, Faculty of Engineering, Cairo University, and Faculty of Engineering, Mansoura University, Cairo, Egypt, Vol. III, pp. 1211-1222, Jan. 2-4, 1990.

El-Mistikawy, T.M.A., Attia, H.A., and Megahed, A.A., "The rotating disk flow in the presence of weak magnetic field", Proceedings of the Fourth Conference on Theoretical and Applied

Mechanics, Egyptian Committee of Theoretical and Applied Mechanics, Cairo, Egypt, pp. 69-82, Nov. 5-7, 1991.

Attia, H.A., “A multi-rigid-body formulation based on particle dynamics and velocity transformation”, Research Report, Department of Aerospace and Mechanical Engineering, The

University of Arizona, Tucson, Arizona, USA, 1992.

Attia, H.A., “A computer-oriented dynamical formulation with applications to multi-body systems”, Ph.D. Thesis, Department of Engineering Mathematics and Physics, Faculty of Engineering, Cairo

University, Egypt, 1993.

Nikravesh, P.E. and Attia, H.A., "Construction of the equations of motion for multibody dynamics using point and joint coordinates", in: M.F.O.S. Pereira and J.A.C. Ambrosio (eds.),

Computer-Aided Analysis of Rigid and Flexible Mechanical Systems, Kluwer Academic Publishers, NATO ASI, Series E: Applied Sciences, Vol. 268, pp. 31-60, 1994.

Maher, G.M. and Attia, H.A., “Dynamic modelling of the three-degrees of freedom planar platform-type manipulator”, Proceedings of the First International Conference on Mechanical

Engineering Advanced Technology for Industrial Production MEATIPI, Section 5: Control Systems and Machine, Faculty of Engineering, Assuit University, Assuit, Egypt, pp. 595-606, Dec. 27-29,

1994..

Attia, H.A., "KAC, A computer-aided analysis program for the kinematic analysis of generalized planar linkages", Proceedings of the Second International Conference on Engineering Mathematics and Physics (ICEMP-94), Faculty of Engineering, Cairo University, Cairo, Egypt, Vol. 4, pp. 17-30,

Dec. 27-29, 1994.

El-Mistikawy, T.M.A., Attia, H.A., and Megahed, A.A., "A numerical method for the dynamic analysis of planar mechanisms", Proceedings of the Second International Conference on

Engineering Mathematics and Physics (ICEMP-94), Faculty of Engineering, Cairo University, Cairo, Egypt, Vol. 4, pp. 31-44, Dec. 27-29, 1994.

Attia, H.A., "Effect of an external uniform magnetic field on the unsteady von Karman rotating disk problem", Proceedings of the Mathematical and Physical Society of Egypt, The National Centre for Information and Decumentation (NIDOC), Academy of Scientific Research and Technology,

Egypt, No. 70, pp. 83-93, 1995.

Attia, H.A., Megahed, A.A., and El-Mistikawy, T.M.A., “Dynamic analysis of common planar mechanisms using point and joint coordinates”, Proceedings of the Mansoura Engineering First Conference, Faculty of Engineering, Mansoura University, Mansoura, Egypt, pp. 182-193, March

28-30, 1995

Megahed, A.A., El-Mistikawy, T.M.A., and Attia, H.A., “Computer modelling of a vehicle dynamics”, Proceedings of the Mansoura Engineering First Conference, Faculty of Engineering, Mansoura

University, Mansoura, Egypt, March 28-30, 1995.

Mohamed, M.G. and Attia, H.A., "Numerical kinematic analysis of the Motor-Vehicle Multi-link suspension system", Proceedings of the 1995 ASME Design Engineering Technical Conferences, 21th ASME Design Automation Conference, American Society of Mechanical Engineers, Boston,

MA, USA, DE-Vol. 82(1), pp. 883-889, Sept. 17-21, 1995.

Attia, H.A. and Mohamed, M.G., “Kinematic analysis of the MacPherson strut motor-vehicle suspension system”, Current Advances in Mechanical Design & Production, Sixth Cairo University

International MDP Conference, Faculty of Engineering, Cairo University, Cairo, Jan. 2-4, 1996.

Attia, H.A., "Dynamic analysis of a vehicle with semi-trailing A-arms suspensions", Transactions of the Canadian Society for Mechanical Engineering, Vol. 20, No. 2, pp. 175-186, 1996.

Attia, H.A., "An efficient algorithm for the kinematic analysis of spatial mechanisms", Proceedings of the 1996 Engineering Systems Design and Analysis Conference (ESDA), Vol. 6, Computational Mechanics & Thermomechanics, Presented at The Third Biennial European Joint Conference on Engineering Systems Design and Analysis Conference, The Petroleum Division, The American

Society of Mechanical Engineers (ASME), PD-Vol. 78, Montpellier, France, July 1-4, 1996.

Attia, H.A., "Dynamic Modelling of common suspension systems using point and joint coordinates", Proceedings of the 1996 Engineering Systems Design and Analysis Conference

(ESDA), Vol. 6, Computational Mechanics & Thermomechanics, Presented at The Third Biennial European Joint Conference on Engineering Systems Design and Analysis Conference, The Petroleum Division, The American Society of Mechanical Engineers (ASME), PD-Vol. 78,

Attia, H.A. and Kotb, N.A., "MHD flow between two parallel plates with heat transfer", Acta Mechanica, Springer-Verlag, Vol. 117, pp. 215-220, 1996.

Attia, H.A., "Dynamic analysis of the multi-link five-point suspension system using point and joint coordinates", Acta Mechanica, Springer-Verlag, Vol. 119, pp. 221-228, 1996.

Attia, H.A. and Mohamed, M.G., "Dynamic modelling of a three degrees-of-freedom planar platform-type manipulator", Proceedings of the 1997 ASME Design Engineering Technical Conferences, 23th ASME Design Automation Conference, American Society of Mechanical

Engineers, Sacramento, California, USA, pp. 1-11, Sept. 14-17, 1997.

Aboul-Hassan, A.L. and Attia, H.A., "Flow due to a rotating disk with Hall effect", Physics Letters A, Elsevier Science Ltd., Vol. 228, pp. 286-290, 1997.

Attia, H.A., "Formulation of the equations of motion for the RRRR robot manipulator", Transactions of the Canadian Society for Mechanical Engineering, Vol. 22, No. 1, pp. 83-93, 1998.

Attia, H.A., "Computer simulation of a vehicle dynamics", Transactions of the Canadian Society for Mechanical Engineering, Vol. 22, No. 2, pp. 127-142, 1998.

Kotb, N.A. and Attia, H.A., “The effect of variable viscosity on the transient MHD flow and heat transfer between parallel plates”1, Bulletin of the Faculty of Engineering, Assuit University, Vol. 26,

Part 2, pp. 141-147, 1998.

Ahmed, M.E.S. and Attia, H.A., "Magnetohydrodynamic flow and heat transfer of a non-Newtonian fluid in an eccentric annulus", Canadian Journal of Physics, National Research Council of Canada,

NRC Research Press, Vol. 76, No. 5, pp. 391-401, 1998.

El-Mistikawy, T.M.A., Attia, H.A. and Megahed, A.A., "Asymptotic solution for the flow due to an infinite rotating disk in the case of small magnetic field", Mechanics Research Communications,

Elsevier Science, Vol. 25, No. 3, pp. 271-278, 1998.

Attia, H.A., "Unsteady MHD flow near a rotating porous disk with uniform suction or injection", Fluid Dynamics Research, The Japan Society of Fluid Mechanics & Elsevier Science, Vol. 23, No. 5,

pp. 283-290, 1998.

Attia, H.A., "Hall current effects on the velocity and temperature fields of an unsteady Hartmann flow", Canadian Journal of Physics, National Research Council of Canada, NRC Research Press,

Vol. 76, No. 9, pp. 739-746, 1998.

Attia, H.A., "A numerical method for the kinematic analysis of spatial mechanisms", Transactions of the Canadian Society for Mechanical Engineering, Vol. 23, No. 1A, pp. 71-82, 1999.

Attia, H.A., "Transient MHD flow and heat transfer between two parallel plates with temperature dependent viscosity", Mechanics Research Communications, Elsevier Science Ltd., Vol. 26, No. 1,

pp. 115-121, 1999.

Attia, H.A., “A review on multi-rigid-body dynamics”, Research Report, Associate Professors’ Promotion Committee, Ministry of Higher Education, Egypt, 1999.

Attia, H.A., "Numerical kinematic analysis of the double wishbone motor-vehicle suspension system", Transactions of the Canadian Society for Mechanical Engineering, Vol. 24, No. 2, pp.

391-399, 2000.

Attia, H.A. and Mohamed, M.G., "Kinematic analysis of the Macpherson strut motor-vehicle suspension system", Proceedings of the 2000 ASME International Design Engineering Technical

Conferences & Computers and Information in Engineering Conference, 26th ASME Design Automation Conference, Baltimore, Maryland, USA, pp. 1-12, Sept. 10-13, 2000.

Attia, H.A., El-Mistikawy, T.M.A. and Megahed, A.A., ["Formulation of the equations of motion of RRPR robot manipulator", Proceedings of the 2000 ASME International Design Engineering

Technical Conferences & Computers and Information in Engineering Conference, 26th ASME Design Automation Conference, American Society of Mechanical Engineers, Baltimore, Maryland,

USA, pp. 1-11, Sept. 10-13, 2000.

Attia, H.A., “Hiemenz magnetic flow of a non-Newtonian fluid of second grade with heat transfer”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 78,

No. 9, pp. 875-882, 2000.

Ahmed, M.E.S. and Attia, H.A., “MHD flow and heat transfer in a rectangular duct with temperature dependent viscosity and Hall effect”, International Communications in Heat and Mass

Transfer, Elsevier Science Ltd., Vol. 27, No.8, pp. 1177-1187, 2000.

El-Mistikawy, T.M.A., Attia, H.A. and Megahed, A.A., "Asymptotic solution for the flow due to a rotating disk in the case of large magnetic field", Transactions of the Canadian Society for

Mechanical Engineering, Vol. 24, No. 3 & 4, pp. 515-524, 2000.

Attia, H.A., “Transient flow of a conducting fluid with heat transfer due to an infinite rotating disk”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 28, No.

3, pp. 439-448, 2001.

Attia, H.A. and Ahmed, M.E.S., “A transient analysis of the velocity and temperature fields of a power-law Hartmann fluid flow with the Hall effect”, Scientific Bulletin, Faculty of Engineering, Ain Shames University, Part III: Mechanical Engineering and Physics & Mathematics, Vol. 36, No. 1,

pp. 431-448, 2001.

Attia, H.A. and Amasha, H.M., “Kinematic analysis of a parallel robot manipulator”, Proceedings of the 18th Canadian Congress of Applied Mechanics CANCAM 2001, Memorial University of

Newfoundland, Canada, Vol. 2, pp. 295-296, June 3-7, 2001.

Attia, H.A. and Amasha, H.M., “Kinematic analysis of planar mechanisms: a computer oriented approach”, Proceedings of the 18th Canadian Congress of Applied Mechanics CANCAM 2001,

Memorial University of Newfoundland, Canada, Vol. 2, pp. 297-298, June 3-7, 2001.

Attia, H.A., “A simplified recursive formulation for the dynamic analysis of planar mechanisms”, Acta Mechanica, Springer-Verlag, Vol. 149, No. 1-4, pp. 11-21, 2001.

Attia, H.A., “Dynamic modelling of planar linkages using particle dynamics and velocity transformation”, Proceedings of the Eighth IFToMM International Symposium on Theory of

Machines and Mechansims (SYROM 2001), Interntional Federation for the Theory of Machines and Mechanisms, ARoTMM Bucharest, Romania, Vol. I, pp. 25-30, Aug. 28- Sept. 1, 2001.

Attia, H.A. and Amasha, H.M., “An efficient algorithm for the kinematic analysis of planar mechanisms”, Proceedings of the Eighth IFToMM International Symposium on Theory of Machines

and Mechansims (SYROM 2001), Interntional Federation for the Theory of Machines and Mechanisms, ARoTMM Bucharest, Romania, Vol. I, pp. 31-36, Aug. 28- Sept. 1, 2001.

Attia, H.A., "A computational method for the dynamic analysis of planar linkages with applications", Proceedings of the 2001 ASME International Design Engineering Technical

Conferences & Computers and Information in Engineering Conference, 27th ASME Design Automation Conference, American Society of Mechanical Engineers, Pittsburgh, Pennsylvania,

USA, pp. 1-12, Sept. 9-12, 2001.

Attia, H.A., “Influence of temperature dependent viscosity on the MHD channel flow of dusty fluid with heat transfer”, Acta Mechanica, Springer-Verlag, Vol. 151, No. 1-2, pp. 69-101, 2001.

Attia, H.A., “A recursive method for the dynamic analysis of a system of rigid bodies in plane motion”, Computer Assisted Mechanics and Engineering Sciences (CAMES), Central European

Association for Computational Mechanics, Institute of Fundamental Technological Research, Polish Academy of Sciences, Vol. 8, No. 4, pp. 557-566, 2001.

El-Moghazy, I.M.M. and Attia, H.A., "Part-I Heat transfer in the thin layer part for the film condensation on horizontal low finned tubes", Transactions of the Canadian Society for Mechanical

Engineering, Vol. 25, No. 3&4, pp. 369-390, 2001.

Attia, H.A. and El-Mistikawy, T.M.A., “A matrix formulation for the dynamic analysis of planar mechanisms using point coordinates and velocity transformation”, European Journal of Mechanics A/Solids, European Mechanics Society & Elsevier Science Ltd., Vol. 20, No. 6, pp. 981-995, 2001.

Attia, H.A. and Aboul-Hassan, A.L., “Effect of Hall current on the unsteady MHD flow due to a rotating disk with uniform suction or injection“,Applied Mathematical Modelling, Simulation and

Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 25, Issue 12, pp. 1089-1098, 2001.

Attia, H.A. and Ahmed, M.E.S., “A transient Hartmann flow with heat transfer of a non-Newtonian fluid with suction and injection considering the Hall effect”, Journal of Plasma Physics, Cambridge

University Press, Vol. 67, Part 1, pp. 27-47, 2002.

Attia, H.A., “Dynamic modelling of the double wishbone motor-vehicle suspension system”, European Journal of Mechanics A/Solids, European Mechanics Society & Elsevier Science Ltd., Vol.

21, No.1, pp. 167-174, 2002.

Aboul-Hassan, A.L. and Attia, H.A., “Hydromagnetic flow of a dusty fluid in a rectangular channel with Hall current and heat transfer”, Canadian Journal of Physics, National Research Council of

Canada, NRC Research Press, Vol. 80, No. 5, pp. 579-589, 2002.

Attia, H.A., “On the effectiveness of uniform suction-injection on the unsteady flow due to a rotating disk with heat transfer”, International Communications in Heat and Mass Transfer,

Elsevier Science Ltd., Vol. 29, No. 5, pp. 653-661, 2002.

Attia, H.A., “Unsteady MHD flow and heat transfer of dusty fluid between parallel plates with variable physical properties”, Applied Mathematical Modelling, Elsevier Science Ltd., Vol. 26, Issue

9, pp. 863-875, 2002.

Aboul-Hassan, A.L. and Attia, H.A., “Unsteady hydromagnetic flow of a viscoelastic fluid with temperature dependent viscosity”, Canadian Journal of Physics, National Research Council of

Canada, NRC Research Press, Vol. 80, No. 9, pp. 1015-1024, 2002.

Attia, H.A., “The structure of a viscous conducting fluid near a rotating disk edge”, Proceedings of the International Conference on Modelling & Simulation in Technical and Social Sciences

(MS’2002-Spain), International Association for the Advancement of Modelling & Simulation Techniques in Enterprices (AMSE), Girona, Spain, pp. 1-6, June 25-27, 2002.

Attia, H.A. and Jazmati, M.S., “Kinematics and dynamics of a planar platform-type manipulator”, International Mathematical Journal, Vol. 2, No. 7, pp. 663-669, 2002.

Attia, H.A., “Hall current effect on the unsteady von Karman problem with heat transfer”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 29, No. 7, pp.

983-991, 2002.

Attia, H.A., “Transient MHD flow of a particular class of non-Newtonian fluids near a rotating porous disk with heat transfer”, Physica Scripta, International Journal for Experimental and

Theoretical Physics, The Royal Swedish Academy of Sciences & Marston Lindsay Ross International Limited, Vol. 66, No. 6, pp. 458-469, 2002.

Attia, H.A., “Transient Hartmann flow with heat transfer considering the ion slip”, Physica Scripta, International Journal for Experimental and Theoretical Physics, The Royal Swedish Academy of

Sciences & Marston Lindsay Ross International Limited, Vol. 66, No. 6, pp. 470-475, 2002.

Attia, H.A., “A simplified recursive formulation for the dynamic analysis of spatial mechanisms in point coordinates”, Journal of Applied Mathematics and Mechanics, ZAMM - Zeitschrift fur Angewandte Mathematik und Mechanik, Wiley-VCH, Vol. 83, No. 5, pp. 351-360, 2003.

Attia, H.A., “Unsteady flow of a non-Newtonian fluid above a rotating disk with heat transfer”, International Journal of Heat and Mass Transfer, Elsevier Science Ltd., Vol. 46, Issue 14, pp.

2695-2700, 2003.

Attia, H.A., “Velocity and temperature fields of a non-Newtonian fluid above a rotating disk with Hall effect”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol.

30, No. 4, pp. 525-534, 2003.

Attia, H.A., “Unsteady von Karman magnetic flow and heat transfer considering the ion slip”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 4, pp.

535-543, 2003.

Attia, H.A. and Jazmati, M.S., “Kinematic analysis of planar mechanical systems in Cartesian coordinates”, International Mathematical Journal, Vol. 3, No. 5, pp. 503-510, 2003.

Jazmati, M.S. and Attia, H.A., “Determination of the singular points on satellites’tracks and the geometrical status of the adjacent tracks”, International Mathematical Journal, Vol. 3, No. 5, pp.

511-514, 2003.

Attia, H.A., “Axisymmetric stagnation point MHD flow over a porous plate with heat transfer”, Proceedings of the 4TH ASME/JSME Joint Fluids Engineering Conference (FEDSM’03), American

Society of Mechanical Engineers & Japaneese Society of Mechanical Engineers, Honolulu, Hawaii, USA, pp. 1-5, July 6-11, 2003.

Attia, H.A. and Aboul-Hassan, A.L., “The effect of variable properties on the unsteady Hartmann flow with heat transfer considering the Hall effect”, Applied Mathematical Modelling, Simulation

and Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 27, Issue 7, pp. 551-563, 2003.

Attia, H.A., “Dynamic analysis of planar mechanisms using particle dynamics”, Proceedings of the Mediterranean Conference on Modelling and Simulation (MCMS’03), International Association for

the Advancement of Modelling & Simulation Techniques in Enterprices (AMSE) & University Mediterranea of Reggio Calabria, Reggio Calabria, Italy, pp. 1-6, June 25-27, 2003.

Attia, H.A., “Dynamic analysis of planar linkages: A recursive approach”, Meccanica, International Journal of the Italian Association of Theoretical and Applied Mechanics (AIMETA), Kluwer

Academic Publishers, Vol. 48, No. 4, pp. 405-418, 2003.

Attia, H.A., “Unsteady flow of a dusty conducting non-Newtonian fluid through a pipe”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 81, No. 5, pp.

789-795, 2003.

Attia, H.A., “Steady von Karman flow and heat transfer of a non-Newtonian fluid with uniform suction-injection”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd.,

Vol. 30, No. 6, pp. 871-879, 2003.

Attia, H.A., “Steady Hartmann flow with temperature dependent viscosity and the ion slip”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 6, pp.

881-890, 2003.

Attia, H.A., “Time varying rotating disk flow and heat transfer of a conducting fluid with suction or injection”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol.

30, No. 7, pp. 1041-1049, 2003.

Attia, H.A., “Kinematic analysis of the multi-link five-point suspension system in point coordinates”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 17,

No. 8, pp. 1133-1139, 2003.

El-Mistikawy, T.M.A. and Attia, H.A., “Magnetohydrodynamic flow near the edge of a rotating disk”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol.

81, No. 9, pp. 1141-1149, 2003.

Attia, H.A., “Homann magnetic flow and heat transfer with uniform suction or injection”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 81, No. 10,

pp. 1223-1230, 2003.

Attia, H.A., “Dynamic simulation of a parallel manipulator”, A.M.S.E. Journals, Advances in Modelling & Analysis, Series C: Systems Analysis, Control & Design, Simulation, CAD, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 58,

No. 3, pp. 27-41, 2003.

Attia, H.A., “Equations of motion of planar serial chains of rigid bodies”, Journal of Multibody System Dynamics, Kluwer Academic Publishers, Vol. 10, Issue 4, pp. 323-339, 2003.

Attia, H.A., “A matrix formulation for the dynamic analysis of spatial mechanisms using point coordinates and velocity transformation”, Acta Mechanica, Springer-Verlag, Vol. 165, No. 3-4, pp.

207-222, 2003.

Attia, H.A., “Dynamics of the MacPherson strut motor-vehicle suspension system in point and joint coordinates”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol.

17, No. 9, pp. 1287-1296, 2003.

Attia, H.A., “Equations of motion of a planar chain of rigid rods using a recursive algorithm”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of

Modelling & Simulation Techniques in Enterprices, Vol. 72, No. 2, pp. 53-66, 2003.

Attia, H.A., “On the transient flow and heat transfer of a non-Newtonian fluid due to the uniform rotation of an infinite disk”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid

& fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 72, No.

3, pp. 1-11, 2003.

Attia, H.A., “Hiemenz magnetic flow and heat transfer with uniform suction or injection”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic,

mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 72, No. 7, pp. 21-29, 2003.

Attia, H.A., “Numerical kinematic analysis of the standard MacPherson motor-vehicle suspension system”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 17, No. 12,

pp. 1961-1968, 2003.

Attia, H.A., “Dynamic modelling of planar mechanisms using point coordinates”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 17, No. 12, pp.

1977-1985, 2003.

Attia, H.A., “Hydromagnetic stagnation point flow with heat transfer over a permeable surface”, The Arabian Journal for Science and Engineering (AJSE), Series B: Engineering, KFUPM Press, King

Fahd University of Petroleum and Minerals, Kingdom of Saudi Arabia, Vol. 28, No. 1B, pp. 107-112, 2003.

Attia, H.A., “The effect of uniform suction and injection on the unsteady flow due to a permeable rotating disk with heat transfer”, Proceedings of the Mathematical and Physical Society of Egypt, The National Centre for Information and Decumentation (NIDOC), Academy of Scientific Research

and Technology, Egypt, No. 81, pp. 1-10, 2004.

Attia, H.A., “A recursive method for the dynamic analysis of mechanical systems in spatial motion”, Acta Mechanica, Springer-Verlag, Vol. 167, No. 1-2, pp. 41-55, 2004.

Attia, H.A., “A computer method for the dynamic analysis of a system of rigid bodies in plane motion”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 18, No. 2,

pp. 193-302, 2004.

Attia, H.A., “Unsteady Hartmann flow of a viscoelastic fluid considering the Hall effect”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 82, No. 2, pp.

127-139, 2004.

Attia, H.A., “Equations of motion of planar mechanical systems based on particle dynamics and a recursive algorithm”, Proceedings of the Institution of Mechanical Engineers (IMechE) Part K: Journal of Multi-body Dynamics, Professional Engineering Publishing Ltd., Vol. 218, No. 1, pp.

31-38, 2004.

Attia, H.A., “Equations of motion of serial chains in spatial motion using a recursive algorithm”, Computer Assisted Mechanics and Engineering Sciences (CAMES), Central European Association

for Computational Mechanics, Polish Academy of Sciences, Vol. 11, No. 1, pp. 35-46, 2004.

Attia, H.A., “A recursive algorithm for generating the equations of motion of spatial mechanical systems with application to the five-point suspension”, KSME International Journal, The Korean

Society of Mechanical Engineers, Vol. 18, No. 4, pp. 550-559, 2004.

Attia, H.A., “State-of-the-art of rotating disk flow of a conducting fluid”, Research Report, Professors’ Promotion Committee, Ministry of Higher Education, Egypt, 2004.

Attia, H.A., “A numerical algorithm for kinematic analysis of the Macpherson strut suspension system using point coordinates”, The Journal of KSIAM, Korea Society for Industrial and Applied

Mathematics, Vol. 8, No. 1, pp. 67-80, 2004.

Attia, H.A., “Ion slip effect on the flow due to a rotating disk”, The Arabian Journal for Science and Engineering (AJSE), Series A: Science, KFUPM Press, King Fahd University of Petroleum and

Minerals, Kingdom of Saudi Arabia, Vol. 29, No. 2A, pp. 165-172, 2004.

Attia, H.A. and Ahmed, M.E.S., “Non-Newtonian conducting fluid flow and heat transfer due to a rotating disk”, The ANZIAM Journal, The Journal of the Australian Mathematical Society: Series

B-Applied Mathematics, Vol. 46, Part 2, pp. 237-248, 2004.

Attia, H.A., “On hydromagnetic flow due to a rotating disk”, Applied Mathematical Modelling, Simulation and Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol.

28, Issue 12, pp. 1007-1014, 2004.

Attia, H.A. and Ahmed, M.E.S., “Hall effect on unsteady MHD Couette flow and heat transfer of a Bingham fluid with suction and injection”, Applied Mathematical Modelling, Simulation and

Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 28, Issue 12, pp. 1027-1045, 2004.

Attia, H.A., “Dynamic analysis of a chain of rigid rods”, The Journal of KSIAM, Korea Society for Industrial and Applied Mathematics, Vol. 8, No. 2, pp. 75-86, 2004.

Attia, H.A., “MHD flow of a dusty fluid between parallel plates”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling &

Simulation Techniques in Enterprices, Vol. 73, No. 2, pp. 45-58, 2004.

Attia, H.A., “Hall effect on the flow of a dusty non-Newtonian fluid in a circular pipe”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic,

mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 2, pp. 59-70, 2004.

Attia, H.A., “Analytical solution for unsteady MHD flow of a dusty fluid in a round tube considering the Hall effect”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid

mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 3, pp. 39-50,

2004.

Attia, H.A., “Kinematic analysis of planar mechanical systems via program KAC”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic,

mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 4, pp. 1-18, 2004

Attia, H.A., “A recursive algorithm for generating the equations of motion of a chain of rigid rods in spatial motion”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid

mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 4, pp. 31-44,

2004.

Attia, H.A., “Equations of motion of a system of rigid bodies in point coordinates”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic,

mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 6, pp. 21-34, 2004.

. Attia, H.A., “A recursive approach for dynamic analysis of multibody systems with applications to vehicle dynamics”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid

mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 6, pp. 55-74,

2004

Attia, H.A., “Dynamic analysis of spatial mechanisms: A recursive approach”, Meccanica, International Journal of the Italian Association of Theoretical and Applied Mechanics (AIMETA),

Springer-Verlag, Vol. 40, No. 1, pp. 1-18, 2005.

Attia, H.A., “Numerical study of the flow and heat transfer of Reiner-Rivlin fluid on a rotating porous disk”, Journal of Applied Mechanics and Technical Physics, Translated by Kluwer

Academic/Plenum Publishers: Compustion, Explosion, and Shock Waves, Vol. 46, No. 1, pp. 68-76, 2005

Attia, H.A., “Point-joint coordinate formulation for the dynamic analysis of generalised planar linkages”, The ANZIAM Journal, The Journal of the Australian Mathematical Society: Series

B-Applied Mathematics, Vol. 46, Part 4, pp. 575-589, 2005.

Attia, H.A., “Unsteady Couette flow with heat transfer of a viscoelastic fluid considering the Hall effect”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia &

Montenegro, Vol. 27, pp. 5-21, 2005.

Attia, H.A., “The effect of suction and injection on the unsteady flow of a dusty conducting fluid in rectangular channel”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers, Vol. 19,

No. 5, pp. 1148-1157, 2005.

Attia, H.A., “Effect of temperature dependent viscosity and thermal conductivity on the unsteady MHD Couette-Poiseulle flow”, Kragujevac Journal of Science (KJS), Faculty of Science, University

of Kragujevac, Serbia & Montenegro, Vol. 27, pp. 23-30, 2005.

Ahmed, M.E.S. and Attia, H.A., “The effect of Hall current on MHD flow and heat transfer of Bingham fluids in a rectangular duct”, Canadian Journal of Physics, National Research Council of

Canada, NRC Research Press, Vol. 83, No. 6, pp. 637-651, 2005.

Attia, H.A., “Unsteady MHD Couette flow and heat transfer between parallel porous plates with exponential decaying pressure gradient”, Proceedings of IMECE2005, Fluids Engineering Division,

Rheology and Fluid Mechanics of Non Linear Materials, 2005 ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Orlando, Florida,

pp. 1-5, Nov. 5-11, 2005.

Attia, H.A., “MHD Couette flow with temperature dependent viscosity and the ion slip”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company,

Tamsui, Taiwan, Vol. 8, No. 1, pp. 11-16, 2005.

Attia, H.A., “The effect of suction and injection on the unsteady flow between two parallel plates with variable properties”, Tamkang Journal of Science and Engineering, Tamkang University Press,

Amvo Publishing Company, Tamsui, Taiwan, Vol. 8, No. 1, pp. 17-22, 2005.

Attia, H.A., “Effect of the ion slip on the MHD flow of a dusty fluid with heat transfer under exponential decaying pressure gradient”, Central European Journal of Physics (CEJP), Central

European Science Journals, Vol. 3, No. 4, pp. 484-507, 2005.

Attia, H.A., “Two-step generation of the equations of motion of closed-chains using point and joint cootdinates”, Applied Mathematical Modelling, Simulation and Computation for Engineering

and Enviromental Systems, Elsevier Science Ltd., Vol. 29, Issue 12, pp. 1182-1195, 2005.

Attia, H.A., “Magnetic flow and heat transfer in a rectangular channel with variable viscosity”, The Arabian Journal for Science and Engineering (AJSE), Series A: Science, KFUPM Press, King Fahd

University of Petroleum and Minerals, Kingdom of Saudi Arabia, Vol. 30, No. 2A, pp. 287-298, 2005.

Attia, H.A., “Unsteady Couette-Poiseulle flow with variable physical properties in the presence of a uniform magnetic field”, Mechanics and Mechanical Engineering International Journal (MME),

Division of Mechanics, Technical University of Lodz, Lodz, Poland, Vol. 9, No. 2, pp. 5-13, 2005.

Attia, H.A., “Unsteady Couette flow with heat transfer of a viscoelastic fluid considering the ion slip”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid

Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 47, No. 5, pp 809-817, 2005.

Attia, H.A., “Unsteady Couette-Poiseulle flow with temperature dependent physical properties in the presence of a uniform magnetic field”, Malaysian Journal of Science (MJS), Series B, Vol. 24,

No. 2, pp. 51-57, 2005.

Attia, H.A., “Dynamic model of multi-rigid-body systems based on particle dynamics with recursive approach”, Journal of Applied Mathematics (JAM), Hindawi Publishing Corporation, Vol.

4, pp. 365-382, 2005.

Attia, H.A., “Unsteady flow of a dusty conducting fluid between parallel porous plates with temperature dependent viscosity”, Turkish Journal of Physics, Department of Scientific Journals,

The Scientific and Technical Research Council of Turkey, Vol. 29, Issue 4, 257-267, 2005.

Attia, H.A., “MHD Couette flow with variable physical properties”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling &

Simulation Techniques in Enterprices, Vol. 74, No. 2, pp. 25-34, 2005.

Attia, H.A., “Kinematic analysis of the Macpherson strut suspension system in point coordinates”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the

Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 74, No. 2, pp. 35-52, 2005.

Attia, H.A., “Ion slip effect on the unsteady flow of a dusty power law fluid through a circular pipe”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics &

thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 74, No. 4, pp. 51-64,

2005.

Attia, H.A., “Hall effect on unsteady Couette flow with heat transfer under exponential decaying pressure gradient”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid

Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 19, No. 11, pp. 1053-2060, 2005.

Attia, H.A., “Numerical study of flow and heat transfer of a non-Newtonian fluid on a rotating porous disk”, Applied Mathematics and Computation, Elsevier Science Ltd., Vol. 163, Issue 1, pp.

327-342, 2005.

Attia, H.A., “Unsteady Couette flow with heat transfer considering the ion slip”, Turkish Journal of Physics, Department of Scientific Journals, The Scientific and Technical Research Council of

Turkey, Vol. 29, Issue 6, pp. 379-388, 2005.

Attia, H.A., “Hall effect on Couette flow with heat transfer of a dusty conducting fluid in the presence of uniform suction and injection”, African Journal Of Mathematical Physics (AJMP), The

Moroccan Grouping in High Energy Physics (GNPHE), Vol. 2, No. 1, pp. 97-110, 2005

Attia, H.A., “Steady Couette flow with temperature dependent viscosity and the Hall effect”, The Arab Gulf Journal of Scientific Research, The Arabian Gulf University (AGU), Kingdom of Bahrain,

Vol. 23, No. 1, pp. 37-41, 2005.

Attia, H.A. and Ahmed, M.E.S., “Circular pipe MHD flow of a dusty Bingham fluid”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company,

Taiwan, Vol. 8, No. 4, pp. 257-265, 2005.

Attia, H.A., “Dynamic simulation of constrained mechanical systems using projection recursive algorithm”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical Sciences and

Engineering, Vol. XXVIII, No. 1, pp. 45-52, 2006.

Attia, H.A., “Transient hydromagnetic flow of a dusty fluid between parallel plates with ion slip and heat transfer”, Italian Journal of Pure and Applied Mathematics (IJPAM), Forum, Editrice

Universitaria Udinese Srl, Via Palladio 8, 33100 Udine, Italy, Vol. 19, pp. 91-114, 2006.

Attia, H.A., “Unsteady MHD flow of a dusty non-Newtonian Bingham fluid through a circular pipe”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical Sciences and Engineering, Vol.

XXVII, No. 3, pp. 264-268, 2006.

Attia, H.A., “On the effectiveness of variation in the physical variables on the mhd steady flow between parallel plates with heat transfer”, International Journal for Numerical Methods in

Engineering, John Wiley & Sons, Ltd., Vol. 65, Issue 2, pp. 224-235, 2006.

Attia, H.A., “Computational dynamics of three-dimensional closed-chains of rigid bodies”, Applied Mathematics and Computation, Elsevier Science Ltd., Vol. 172, Issue 1, pp. 286-304, 2006.

Attia, H.A., “Steady Couette flow with temperature dependent physical properties”, Archive of Applied Mechanics (Ingenieur Archiv), Springer-Verlag GmbH, Vol. 75, No. 4-5, pp. 268-274, 2006.

Attia, H.A., “Hall effect on the flow of a dusty Bingham fluid in a circular pipe”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and

Technical Research Council of Turkey, Vol. 30, Issue 1, pp. 14-21, 2006.

Attia, H.A., “Unsteady Hartmann flow with heat transfer in the presence of uniform suction and injection”, Journal of the Korea Society of Mathematical Education Series B: Pure and Applied Mathematics, Korea Society of Mathematical Education (KSME), Vol. 13, No. 1, pp. 1-10, 2006.

Attia, H.A. and Ahmed, M.E.S., “Hydromagnetic flow and heat transfer of a conducting Casson fluid in a rectangular channel”, Communications in Numerical Methods in Engineering, John Wiley

& Sons, Vol. 22, Issue 4, pp. 251-268, 2006.

Attia, H.A., “Hall effect on Couette flow with heat transfer of a dusty conducting fluid between parallel porous plates under exponential decaying pressure gradient”, Journal of Mechanical

Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 4, pp. 569-579, 2006.

Attia, H.A., “Ion slip effect on the unsteady flow of a dusty Casson fluid through a circular pipe”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia &

Montenegro, Vol. 28, pp. 5-15, 2006.

Attia, H.A., “On the effectiveness of porosity on unsteady Couette flow and heat transfer between parallel porous plates with exponential decaying pressure gradient”, Kragujevac Journal of

Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 28, pp. 17-24, 2006.

Attia, H.A., “Time varying Hartmann flow with heat transfer of a power-law fluid with uniform suction and injection under constant pressure gradient”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 28, pp. 25-38, 2006.

Attia, H.A., “Unsteady hydromagnetic channel flow of dusty fluid with temperature dependent viscosity and thermal conductivity”, Heat and Mass Transfer, Warme-und Stoffubertragung,

Springer-Verlag, Vol. 42, No. 9, pp. 779-787, 2006.

Attia, H.A., “Stagnation point flow and heat transfer of a micropolar fluid in a porous medium”, Turkish Journal of Physics, Department of Scientific Journals, The Scientific and Technical

Research Council of Turkey, Vol. 30, Issue 1, pp. 57-66, 2006.

Attia, H.A., “Rotating disk flow with heat transfer of a non-Newtonian fluid in porous medium”, Turkish Journal of Physics, Department of Scientific Journals, The Scientific and Technical

Research Council of Turkey, Vol. 30, Issue 2, pp. 103-108, 2006.

Attia, H.A., “Flow of a non-Newtonian fluid with heat transfer above a rotating disk considering the ion slip”, Chemical Engineering Communications (CEC), Taylor & Francis Group, Vol. 193, pp.

976-985, 2006.

Attia, H.A. and Ahmed, M.E.S., “Hydromagnetic impulsively lid-driven flow and heat transfer of a casson fluid”, Tamkang Journal of Science and Engineering, Tamkang University University Press,

Amvo Publishing Company, Tamsui, Taiwan, Vol. 9, No. 3, pp. 195-204, 2006.

Attia, H.A., "On the effectiveness of the ion slip on the steady flow of a conducting fluid due to a porous rotating disk with heat transfer", Tamkang University University Press, Amvo Publishing

Company, Tamsui, Taiwan, Vol. 9, No. 3, pp. 185-193, 2006.

Attia, H.A., “Effect of ion slip on MHD flow with heat transfer due to a rotating disk with uniform suction or injection”, Journal of the Korean Physical Society (JKPS), The Korean Physical Society,

Vol. 49, No. 1, pp. 155-161, 2006.

Attia, H.A., “Time varying Hartmann flow with heat transfer between two parallel porous plates”, Proceedings of IMECE2006, Fluids Engineering Division, Rheology and Fluid Mechanics of Non Linear Materials, 2006 ASME International Mechanical Engineering Congress and Exposition,

American Society of Mechanical Engineers, Chicago, Illinois, pp. 1-5, Nov. 5-10, 2006.

Attia, H.A., “MHD Hartmann flow of a dusty fluid with exponential decaying pressure gradient”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and

Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 8, pp. 1232-1239, 2006.

Attia, H.A., “Hall effect on unsteady hartmann flow with heat transfer under exponential decaying pressure gradient”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid

Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 8, pp. 1302-1308, 2006.

Attia, H.A., “Unsteady MHD Couette flow and heat transfer of dusty fluid with variable physical properties”, Applied Mathematics and Computation, Elsevier Science Ltd., Vol. 177, No. 1, pp.

308-318, 2006.

Attia, H.A., “On the effectiveness of uniform suction and injection on steady rotating disk flow in porous medium with heat transfer”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol.

30, Issue 4, pp. 231-236, 2006.

Attia, H.A., “Time varying hydromagnetic flow of dusty fluid between parallel porous plates considering the ion slip”, Journal of Technical Physics, Central European Association for

Computational Mechanics, Institute of Fundamental Technological Research, Military University of Technology, Polish Academy of Sciences, Warszawa, Vol. 47, No. 3, pp. 131-147, 2006.

Attia, H.A., “Stagnation point flow towards a stretching surface through a porous medium with heat generation”, Turkish Journal of Engineering and Enviromental Sciences, Department of

Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 5, pp. 299-306, 2006.

Attia, H.A., “Effect of Hall current on the velocity and temperature distributions of Couette flow with variable properties”, Physica A: Statistical Mechanics and Its Applications, Elsevier Science,

Ltd., Vol. 371, Issue 2, pp. 195-208, 2006.

Attia, H.A., “Hall effect on transient hartmann flow and heat transfer of a power-law fluid between parallel porous plates under exponential decaying pressure gradient”, Journal of

Mechanical Engineering (STROJNICKY CASOPIS), Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 57, No. 2, pp. 71-94, 2006.

Attia, H.A., “On the effectiveness of uniform suction and injection on unsteady rotating disk flow in porous medium with heat transfer”, Computational Materials Science, Elsevier Science, Ltd, Vol.

38, pp. 240-244, 2006.

Attia, H.A., “Rotating disk flow in a porous medium”, Journal of Porous Medium (JPM), Begell house, Inc. publishers, Vol. 9, Issue 8, pp. 789-798, 2006.

Attia, H.A., “Investigation of the non-Newtonian micropolar fluid flow with uniform suction/blowing and heat generation”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol.

30, Issue 6, pp. 359-365, 2006

Attia, H.A., “Influence of temperature dependent viscosity on the MHD Couette flow of dusty fluid with heat transfer”, Journal of Differential Equations and Nonlinear Mechanics (DENM), Hindawi

Publishing Corporation, DOI 10.1155/DENM, Article ID 75290, pp. 1-14, Volume 2006.

Attia, H.A., “Ion slip effect on unsteady hartmenn flow with heat transfer under exponential decaying pressure gradient”, Journal of Mathematical Problems in Engineering (MPE), Hindawi

Publishing Corporation, DOI 10.1155/MPE, Article ID 83937, pp. 1-12, Volume 2006.

Attia, H.A., “Heat transfer in a stagnation point flow of a micropolar fluid over a stretching surface with heat generation/absorption”, Tamkang Journal of Science and Engineering, Tamkang

University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 9, No. 4, pp. 299-305, 2006.

Attia, H.A., “Axisymmetric stagnation point flow towards a stretching surface through a porous medium with heat generation”, Journal of Mechanical Engineering (STROJNICKY CASOPIS),

Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 57, No. 4, pp. 209-219, 2006.

Attia, H.A., “Numerical study of the unsteady mhd Couette flow of a viscoelastic fluid with temperature dependent viscosity in the presence of exponential decaying pressure gradient”,

Journal of Mechanical Engineering (STROJNICKY CASOPIS), Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 57, No. 6, pp. 309-321,

2006.

Attia, H.A., “Ion slip effect on the flow due to a rotating disk with heat transfer”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power

Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 12, pp. 2197-2202, 2006.

Attia, H.A., “On the effectiveness of ion slip on steady MHD flow and heat transfer above a rotating disk with Ohmic heating”, Journal of Fluids Engineering, American Society for Mechanical

Engineers (ASME), Vol. 128, Issue 5, 2006.

Attia, H.A. and Seddeek, M.A., “On the effectiveness of uniform suction or injection on two dimensional stagnation point flow towards a stretching surface with heat generation”, Chemical

Engineering Communications (CEC), Taylor & Francis Group, Vol. 194, Issue 4, pp. 553-564, 2007.

Attia, H.A., “On the effectiveness of porosity on stagnation point flow towards a stretching surface with heat generation”, Computational Materials Science, Elsevier Science, Ltd., Vol. 38, pp.

741-745, 2007.

AAttia, H.A., “The effect of ion slip on the flow of Reiner-Rivlin fluid due to a rotating disk with heat transfer”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid

Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 21, No. 1, pp. 174-183, 2007.

Attia, H.A., “Axisymmetric stagnation point flow towards a stretching surface in the presence of a uniform magnetic field with heat generation”, Tamkang Journal of Science and Engineering,

Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 10, No. 1, pp. 11-16, 2007.

Attia, H.A., “On the effectiveness of porosity on unsteady flow between parallel plates of a viscoelastic fluid under constant pressure gradient with heat transfer”, Computational Materials

Science, Elsevier Science, Ltd., Vol. 38, pp. 746-750, 2007.

Attia, H.A., “On the effectiveness of variable physical properties on the transient hydromagnetic couette-poiseulle flow”, African Journal Of Mathematical Physics (AJMP), The Moroccan Grouping

in High Energy Physics (GNPHE), Vol. 4, No. 1, pp. 117-123, 2007.

Attia, H.A., “Rotating disk flow and heat transfer of a conducting non-Newtonian fluid with suction-injection and Ohmic heating”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical

Sciences and Engineering, Vol. XXIX, No. 2, pp. 168-173, 2007.

Attia, H.A., “Ion slip effect on the flow of a dusty fluid through a circular pipe”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 21, No. 3, pp. 513-517,

2007.

Attia, H.A., “Hydromagnetic flow and heat transfer above a rotating disk with uniform suction or injection considering Hall effect”, Journal of Mechanical Science and Technology, Thermal

Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 21, No. 3, pp. 518-524, 2007.

Attia, H.A., “On the effectiveness of porosity on unsteady flow and heat transfer between parallel porous plates with exponential decaying pressure gradient”, Journal of Porous Medium (JPM),

Begell house, Inc. publishers, Vol. 10, Issue 3, pp. 319-326, 2007.

Attia, H.A., “Hydromagnetic transient Couette flow and heat transfer in the presence of exponential decaying pressure gradient with the Hall effect”, Kragujevac Journal of Science (KJS),

Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 29, pp. 5-14, 2007.

Ahmed, M.E.S. and Attia, H.A., “MHD flow and heat transfer of a bingham fluid in an eccentric annulus with the Hall effect”, Computer Assisted Mechanics and Engineering Sciences (CAMES),

Central European Association for Computational Mechanics, Institute of Fundamental Technological Research, Polish Academy of Sciences, Vol. 14, pp. 25-42, 2007.

Abdalla, I.A., Attia, H.A. and Ahmed, M.E.S., "A domian's polynomial solution of unsteady non-newtonian MHD flow", International Journal of Applied Mathematics & Information Sciences

(AMIS), Dixie W Publishing Corporation, USA, Vol. 1, No. 3, 2007.

Attia, H.A., "Analytical solution for flow of a dusty fluid in a circular pipe with Hall and ion slip effect", Chemical Engineering Communications (CEC), Taylor & Francis Group, Vol. 194, Issue 10,

pp. 1287-1296, 2007.

Attia, H.A., “Velocity and temperature distributions between parallel porous plates with Hall effect and variable properties”, Chemical Engineering Communications (CEC), Taylor & Francis Group,

Vol. 194, Issue 10, pp. 1355-1373, 2007.

Attia, H.A., “On the effectiveness of ion slip and uniform suction or injection on steady MHD flow due to a rotating disk with heat transfer and ohmic heating”, Chemical Engineering

Communications (CEC), Taylor & Francis Group, Vol. 194, Issue 10, pp. 1396-1407, 2007.

Attia, H.A., “On the effectiveness of porosity on stagnation point flow with heat transfer over a permeable surface”, Journal of Porous Medium (JPM), Begell house, Inc. publishers, Vol. 10, Issue

6, pp. 625-631, 2007.

Attia, H.A., “On the effectiveness of variation in the physical variables on generaized Couette flow with heat transfer in a porous medium”, Research Journal of Physics, Asian Network for Scientific

Information (ANSI), Academic Journals Inc., Vol. 1, No. 1, pp. 1-9, 2007.

Attia, H.A., “Time varying Hartmann flow with heat transfer of a power-law fluid with uniform suction and injection under exponential decaying pressure gradient”, International Journal for

Engineering Modelling, Vol. 20, No. 1-4, pp. 29-36, 2007.

Attia, H.A., “Stagnation point flow of a second grade fluid with uniform suction or blowing and heat generation”, International Journal for Engineering Modelling, Vol. 20, No. 1-4, pp. 47-53,

2007.

Attia, H.A., “Modelling of three-dimensional mechanisms using point coordinates with a recursive approach”, Applied Mathematical Modelling, Simulation and Computation for Engineering and

Enviromental Systems, Elsevier Science, Ltd., Vol. 32, pp. 315-326, 2008.

Attia, H.A., "Unsteady hydromagnetic couette flow of dusty fluid with temperature dependent viscosity and thermal conductivity under exponential decaying pressure gradient",

Communications in Nonlinear Science and Numerical Simulation (CNSNS), Elsevier Science, Ltd., Vol. 13, No. 6, pp. 1077-1088, 2008.

Attia, H.A., “Effect of Hall Current on transient hydromagnetic Couette-Poiseuille flow of a viscoelastic fluid with heat transfer”, Applied Mathematical Modelling, Elsevier Science, Ltd., Vol.

32, pp. 375-388, 2008.

Attia, H.A., “The effect of variable properties on the unsteady Couette flow with heat transfer considering the Hall effect”, Communications in Nonlinear Science and Numerical Simulation

(CNSNS), Elsevier Science, Ltd., Vol. 13, pp. 1596-1604, 2008.

Attia, H.A., “Time varying flow of a power-law fluid in porous medium between parallel porous plates with heat transfer under exponential decaying pressure gradient”, Journal of Porous

Medium (JPM), Begell house, Inc. publishers, Vol. 11, Issue 5, pp. 487-495, 2008.

Attia, H.A., “Rotating disk flow and heat transfer through a porous medium of a non-Newtonian fluid with suction and injection”, Communications in Nonlinear Science and Numerical Simulation

(CNSNS), Elsevier Science, Ltd., Vol. 13, Issue 8, pp. 1571-1580, 2008.

Azim, G.A. and Attia, H.A., “Neural networks construction application to the kinematical analysis of the five-point suspension”, Journal of Mechanical Engineering (STROJNICKY CASOPIS),

Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 59, No. 1, pp. 1-12, 2008.

Attia, H.A., “Transient MHD flow between parallel porous plates with heat transfer under exponential decaying pressure gradient and the ion slip”, Kragujevac Journal of Science (KJS),

Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 30, pp. 5-16, 2008.

Attia, H.A., “Stagnation point flow and heat transfer of a micropolar fluid with uniform suction or blowing”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical Sciences and

Engineering, Vol. XXX, No. 1, pp. 51-55, 2008.

Attia, H.A., “Asymptotic solution for hydromagnetic rotating disk flow”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 30, pp.

17-30, 2008.

Attia, H.A., “Effect of variable viscosity on transient flow of a dusty conducting fluid in a parallel-plates channel with uniform suction and injection”, Tamkang Journal of Science and

Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 11, No. 2, pp. 119-126, 2008.

Attia, H.A., “Unsteady hydromagnetic couette flow of dusty fluid with temperature dependent viscosity and thermal conductivity”, International Journal of Non-Linear Mechanics, Elsevier

Science, Ltd., Vol. 43, No. 8, pp. 707-715, 2008.

Attia, H.A. and Ahmed, M.E.S., "Unsteady hydromagnetic generalized couette flow of a non-newtonian fluid with heat transfer", ASME Journal of Heat Transfer, American Society for

Mechanical Engineers (ASME), Vol. 130, Issue 114504, pp. 1-5, 2008.

Attia, H.A., “Closed-form solution for mhd pipe flow of a dusty fluid”, Italian Journal of Pure and Applied Mathematics (IJPAM), Forum, Editrice Universitaria Udinese Srl, Via Palladio 8, 33100

Udine, Italy, Vol. 24, pp. 19-26, July 2008.

Attia, H.A., "Steady flow through a circular pipe of a dusty Oldroyd 8-constants fluid", International Journal of Mathematics and Computer Science (IJMCS), Vol. 3, No. 1, pp. 73-78,

2008.

Attia, H.A., “Steady flow over a rotating disk in porous medium with heat transfer”, Journal of Nonlinear Analysis: Modelling and Control (LANA), Faculty of Mathematics and Informatics, Vilnius

University, Lithuania, Vol. 14, No.1, pp. 21-26, 2009.

Attia, H.A., “On the effectiveness of heat generation/absorption on heat transfer in a stagnation point flow of a micropolar fluid over a stretching surface”, Kragujevac Journal of Science (KJS),

Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 31, pp. 5-9, 2009.

Attia, H.A., “Effect of porosity on unsteady Couette flow with heat transfer in the presence of uniform suction and injection”, Kragujevac Journal of Science (KJS), Faculty of Science, University

of Kragujevac, Serbia & Montenegro, Vol. 31, pp. 11-16, 2009.

Attia, H.A., “Ion slip effect on unsteady Couette flow with heat transfer under exponential decaying pressure gradient”, Tamkang Journal of Science and Engineering, Tamkang University

Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 12, No. 2, pp. 209-214, 2009.

Attia, H.A., “Effect of porosity on unsteady Poiseuille flow of a viscoelastic fluid with temperature dependent viscosity”, Tamkang Journal of Science and Engineering, Tamkang University Press,

Amvo Publishing Company, Tamsui, Taiwan, Vol. 12, No. 2, pp. 215-221, 2009.

Attia, H.A., “Effect of Hall current on the velocity and temperature distributions of couette flow with variable properties and uniform suction and injection”, Computational and Applied

Mathematics (CAM), Brazilian Society of Applied and Computaional Mathematics, Vol. 28, No. 2, pp. 195-212, 2009.

Attia, H.A., “Hiemenz flow through a porous medium of a non-Newtonian Rivlin-Ericksen fluid with heat transfer”, Tamkang Journal of Science and Engineering, Tamkang University Press,

Amvo Publishing Company, Tamsui, Taiwan, Vol. 12, No. 3, pp. 359-364, 2009.

Attia, H.A., “The effect of suction and injection on unsteady Couette flow with variable properties”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac,

Serbia & Montenegro, Vol. 32, pp. 17-24, 2010.

Attia, H.A. and Ewis, K.M., “Three dimensional axis-symmetric stagnation point flow towards a stretching surface in the presence of uniform suction or blowing with heat generation”, ASME

Tenth International Congress of Fluid Dynamics (ICFD10), Ain Soukhna, Egypt, Dec. 2010.

Attia, H.A., "Steady three-dimensional hydromagnetic stagnation point flow towards a stretching sheet with heat generation", Italian Journal of Pure and Applied Mathematics (IJPAM), Forum, Editrice Universitaria Udinese Srl, Via Palladio 8, 33100 Udine, Italy, Vol. 27, pp. 9-18, 2010.

Attia, H.A. and Ahmed, M.E.S., “Transient MHD Couette flow of a Casson fluid between parallel plates with heat transfer”, Italian Journal of Pure and Applied Mathematics (IJPAM), Forum,

Editrice Universitaria Udinese Srl, Via Palladio 8, 33100 Udine, Italy, Vol. 27, pp. 19-38, 2010.