A&M CONSTRUCTION S.R.O. AUTO. VERT. WINDING (GASKET) MACHINE

GRIZZLY MDL. G0498 CNC VERT. MILLING MACHINE

PANDJIRIS WELDING MANIPULATOR

METAL GASKET & BOLT MANUFACTURER PLUS PRESSURE VESSEL/TANK FABRICATOR & PRESSURE GAUGE DISTRIBUTOR

ALL EQUIPMENT CONDENSED INTO 90,000 SQ. FT. WAREHOUSEItems New as 2014 incl.: (7) CNC Lathes; (4) CNC Mills; (20) Engine Lathes & Mills; (7) Bandsaws,

Gasket & Bolt Manufacturing Machinery; (13) Welding Manipulators up to 20' x 22'; (25) Tank Turning Rolls/Sets; (200+) Welding Machines; Ironworkers; Positioner; Plant Support Equip.; Forklifts up to 35,000-Lb. Cap.;

UNUSED Spiral Wound Gasket Inventory & Pressure Gauge Inventory; MORE!

AUCTION

Read Partial Terms and Conditions on Back Page of Brochure

Assets From

4 HOUSTON AREA COMPANIES

4845 Homestead RoadHouston, Texas 77028(See Directions on Back Page)

AUCTION: TUESDAY, JUNE 7 • 10:00 A.M.INSPECTION: Monday, June 6,

9:00 A.M. to 4:00 P.M. & Morning of Sale

BUYER’S PREMIUM: 15% ON-SITE • 18% WEBCAST On-Site Bidding in Houston, Texas or Bid Via Webcast at

<(1 OF 2) BURGELU CYLINDRICAL DIE THREAD ROLLING MACHINES

>SAMPLE VIEW OF WELDERS

HYUNDAI 35,000-LB. CAP. ROUGH TERRAIN FORKLIFT

PARTIAL VIEW OF TANK TURNING ROLL SETS

CNC

EVERISING (FRANHO) 16" X 12" AUTOMATIC CNC HORIZ. BANDSAWCNC

MAZAK QUICKTURN SMART 200M CNC SLANT BED LATHECNC

2006

2012

2014

LARGEQUANTITY

UP TO 240 T. CAP.

2008

2011

LARGEQUANTITY

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

2

MAZAK QUICKTURN SMART 200M CNC SLANT BED LATHE

DAEWOO MDL. PUMA 300C CNC SLANT BED LATHE

(1 OF 2) ROMI CENTUR CNC FLATBED LATHES

MAZAK MDL. QTN-100 CNC SLANT BED LATHE

BRIDGEPORT SERIES 1 VERT. MILLING MACHINES

CNC SLANT BED LATHESMAZAK QUICKTURN SMART 200M, new 2014, 26" swing, 14" max machining dia., 2.6" bar cap., 21" max. turning length, 25 HP integral spndl., 5,000 RPM, 12-tool live turret, 7.5 HP turret, 4,500 RPM, 8" chuck, tool eye, CNC programmable tailstock, S/N 253382.DAEWOO MDL. PUMA 300C, new 2001, Fanuc 21i CNC control, 21" sw. over bed, 14.5" sw. over saddle, 25" turning length, A2-11 spndl. nose, 2,800 RPM, 35 HP motor, 12-station turret, 4" bar cap., 12" chuck, parts catcher, presetter, tailstock, chip conveyor, S/N PM250887.MAZAK MDL. QTN-100, new 2004, Nexus 640T CNC control, 21" sw. over bed, 11" sw. over carriage, 2" bar cap., 15 HP motor, 6,000 RPM, 6" chuck, 12-pos. tool turret, tailstock, tool presetter, chip conveyor, S/N 311173406.MONARCH PREDATOR, Fanuc 18-T CNC control, 20.5" sw. over bed, 12.2" over carriage, A2-6 spndl. nose, 3" spndl. bore, 4,000 RPM, 15 HP, 2.5" bar cap., 6.6" X-axis travel, 25.2" Z-axis travel, 10" Shunk chuck, chip conveyor, live tools, parts catcher, S/N 54214.

CNC FLATBED LATHES(2) ROMI CENTUR 16" X 40" MDL. 30D, as new as 2012, Siemens 828D CNC control, 16" sw. over bed, 8" over crosslide, 40" btwn. centers, 8" SMW hyd. chuck, A2-5 spndl. nose, 2" spndl. bore, 10 HP motor, spds.: 4–4,000 RPM, 40" X-axis travel, 8.5" center ht., S/N 016-015558-448 (2012), S/N 002-093879-448 (2007).

ROMI CENTUR 16" X 20" MDL. 30R, ROMI Mach 5 CNC control, 16" sw. over bed, 8" over crosslide, 20" dist. btwn. centers, 6" self-contained 3-jaw air chuck, 2" hole, 3,000 RPM, RS232 interface, tailstock, set for gang tools, S/N 002-076980-325.

CNC VERTICAL MACHINING CENTERS

DAEWOO MDL. DMV4020d, new 2003, Fanuc 21i-MB CNC control, 17" x 40" tbl., 40" X-axis travel, 20" Y-axis travel, 24" Z-axis travel, CAT-40 spndl., 20 HP motor, 8,000 RPM, coolant, chip conveyor, 20 tool ATC, S/N AV5E1651.

HAAS MDL. VF-4, new 1997, Haas CNC control, 52" x 18" tbl., 1,500-lb. tbl. load cap., CAT-40 spndl., spds.: 0–7,500 RPM, 20 HP motor, 50" X-axis travel, 20" Y-axis travel, 25" Z-axis travel, 710 IPM rapids, 20-pos. tool changer, Servo motors on axes, programmable coolant, S/N 12813.

TREE MDL. 1060/24, Acramatic 2100 CNC control, 50" x 23" tbl., 4" X-axis travel, 20" Y-axis travel, 25" Z-axis travel, CAT-40 ta-per, 8,000 RPM, 20 HP motor, remote pen-dant, chip conveyor, coolant tank, S/N 9-12-93-3040.

VERTICAL MILLING MACHINES

LAGUN MDL. FTV-4, new 1992, 58" x 11" tbl., R-8 spndl., 39" X-axis travel, 15" Y-axis travel, 17" knee travel, 4 HP motor, 4,250 RPM, machine No. 041.

BRIDGEPORT SERIES 1, 9" x 49" tbl., R-8 spndl., 2 HP variable spndl. head, spds.: 60–4,200 RPM, 36" tbl. long. travel, 12" cross travel, 16" vert. travel, updated elec-trics, pwr. feeds in all directions, Acu-Rite D.R.O., S/N 176220.

CLAUSING, 9" x 49" tbl., variable spd. head, S/N Z3733.

(3) BRIDGEPORT SERIES I, 9" x 42" tbl., 3 T-slots, 300-lb. load cap., R-8 spndl., 2 HP motor, spds.: 60–4,200 RPM, 30" tbl. long. travel, 12" cross travel, 16" vert. travel, 5" spndl. travel, ±45 deg. head tilt F-B, ±90 deg. head swivel L-R, variable spd. head, pwr. tbl. travel, S/N 85397, S/N 173633, S/N 160529.

CNC

CNCCNC

CNC

2004

AS NEW AS

2012

2014

2001

3

<GRIZZLY MDL. G0498 CNC VERT. MILLING MACHINE

CLAUSING COLCHESTER 17" X 80" ENGINE LATHE

PARTIAL VIEW OF ENGINE LATHES

DAEWOO MDL. DMV4020d CNC VERT. MACHINING CENTER

HAAS MDL. VF-4 CNC VERT. MACHINING CENTER

CNC VERTICAL MILLING MACHINEGRIZZLY MDL. G0498 3-AXIS, new 2006, 9" x 49" tbl., 3 HP spndl. motor, NT-30 taper, spds.: 50–5,000 RPM, 20.5" spndl. to col., 18" spndl. to tbl., 29" long. travel, 12.2" cross travel, 14.5" knee vert. travel, 5" spndl. travel, 3-axis Centroid CNC control, S/N 953268.

ENGINE LATHESNARDINI 30" X 40" MDL. NHM000, 30" sw. over bed, 18" sw. over crosslide, 40" dist. btwn. centers, spds.: 10–475 RPM, inch/metric threads, 26" 4-jaw chuck.ROMI 26" X 40" MDL. I-30B, 26" sw. over bed, 19" sw. over crosslide, 40" dist. btwn. centers, inch/metric thdng., spds.: 40–1,250 RPM.INSA 24" X 60", 24" sw. over bed, 16" sw. over crosslide, 60" dist. btwn. centers, inch/metric thdng., spds.: 20–1,600 RPM, 2.5" hole, rapids.ROMI 20" X 78" MDL. MVI-DA, 20" sw. over bed, 12" sw. over crosslide, 78" dist. btwn. centers, spds.: 35–1,800 RPM, inch/metric thdng., 2.5" spndl. bore, 3-jaw chuck.LEBLOND REGAL 20" X 72", 20" sw. over bed, 12" over crosslide, 72" dist. btwn. centers, 1-3/4" spndl. bore, (3) spndl. spds.: 40–1,600 RPM, 7.5 HP, 16" 4-jaw chuck, chuck guard, tailstock, steadyrest, chip pans, coolant, S/N 7E1436.IMOR 20" X 36", 20" sw. over bed, 12" sw. over crosslide, 36" dist. btwn. cen-ters.

LEBLOND REGAL 19" X 72", new 1967, 19" sw. over bed, 12" sw. over crosslide, 72" dist. btwn. centers, L-2 spndl. nose, 1-3/4" spndl. bore, spds.: 25–1,000 RPM, 12" 4-jaw chuck, tailstock, chip pans, thread dial, Trav-A-Dial, S/N 6E989.CLAUSING COLCHESTER 17" X 80", approx. 16" sw. over crosslide, 3-jaw chuck, tailstock, machine no. 7/.0220/12806.ROMI 16" X 60" MDL. I-30, 8" sw. over crosslide, 3-jaw chuck, 2.25" thru hole, spds.: 30–1,500 RPM, inch/metric thdng.SUMMIT 16" X 60" Mdl. 16X60B, 16" sw. over bed, 9-3/8" sw. over crosslide, 25-1/8" in gap, 15" gap length, 60" dist. btwn. centers, D1-8 Camlock spndl. nose, #6 MT taper, 3" spndl. bore, (24) spndl. spds.: 20–2,000 RPM, 10 HP motor, 12-1/4" crosslide travel, 15-3/4" bed width, threading, S/N 30492.ROMI 16" X 40" MDL. I-30, 8" OCS, 3-jaw chuck, 2.25" thru hole, spds.: 30–1,500 RPM, inch/metric thdng.SHENYANG 16" X 40" MDL. “K”, 16" sw. over bed, 8" sw. over crosslide, 40" dist. btwn. centers, spds.: 38–1,500 RPM, inch/metric thdng., 3-jaw chuck.SAN YUEN 15" X 36", new 1981, 15-3/4" sw. over bed, 9-1/8" sw. over crosslide, 18" sw. in gap, 3-7/8" gap, 36" dist. btwn. centers, 2" spndl. bore, spds.: 40–1,500 RPM, (34) inch threads: 4–56 TPI, (18) metric threads: 0.5–7mm, 6-3/16" compound slide long. travel, 9-1/4" compound slide cross travel, 12" bed width, 2" tailstock quill dia., 6-3/8" tailstock quill travel, 7-3/4" 3-jaw chuck, manual tailstock, chip pan bed, S/N 6324.

INSPECTION: Monday June 6

9:00 A.M. to 4:00 P.M. & Morning

of Sale

CNC

CNC CNC

2006

2003

4

A&M CONSTRUCTION S.R.O. HORIZ. WINDING (GASKET) MACHINE

HUGE QTY. OF GASKET INVENTORY

A&M CONSTRUCTION S.R.O. AUTO. VERT. WINDING (GASKET) MACHINE

SAMPLE VIEW OF GASKET EQUIPMENT

GASKET GROOVING MACHINES

VIEW OF THREAD ROLLER TOOLING

(1 OF 2) BURGELU CYLINDRICAL DIE THREAD ROLLING MACHINES

MSI BEAUMONT 100 T. CAP. HYDRAULIC BAR SHEAR

HYDRAULIC BAR SHEARMSI BEAUMONT 100 T. CAP., new 2000, 0.5–1.5", 20' bar loading system., auto. feed and stop, S/N N/A.

CYLINDRICAL DIE THREAD ROLLING MACHINES(2) BURGELU, 2" dia. cap., dual 7-1/2 HP motor drives for rollers, 40 T. cap. hyd. pressure to rollers, encapsulated hydraulic tank, S/N N/A.

AUTOMATIC VERTICAL WINDING (GASKET)

MACHINEA&M CONSTRUCTION S.R.O. MDL. VWM, Servo motor positioning, Servo motor wind-ing, variable forming pressure, 12' max. dia., 200 RPM.

HORIZONTAL WINDING (GASKET) MACHINES

(2) A&M CONSTRUCTION S.R.O. MDL. HWM, 2,500mm max. dia., 150 RPM.

ANGLE ROLLS(2) PROMACUT RBM 3/20.

METAL GASKET & BOLT MAKING

EQUIPMENT

AUCTION

2000

BOLT MARKING MACHINESMSI BEAUMONT MDL. MM-24 24" MARKING MACHINE.MSI BEAUMONT MDL. MM-48 48" MARKING MACHINE.MSI BEAUMONT MDL. HNA-L, 5" cap. horiz. nut assembly table w/pneu. clamp.(2) NUT ROTATING ASSEMBLY MACHINES, sgl. station.

MISC. BOLT MAKING EQUIP.

THREAD ROLLING DIES, standard and metric measure, various sizes; BOLT ASSEMBLY TOOL-ING; NUTS AND BOLTS various diameters, vari-ous bolt stress; GAUGES FOR BOLT MAKING.

CENTERING REELRAPID AIR MDL. R35APE, 150-lb. max. coil weight, 4" max. stock width, 5"–16" adj. center dist., 30" max. coil O.D., spds.: 0–50 RPM, 1/4 HP motor, 35" floor to center of reel, 30" dia. back plate, (3) keeper arms, loop control, S/N 99589.

MISC. GASKET GROOVING MACHINES

VARIOUS SIZES GASKET GROOVING MACHINES.

5

CNC AUTOMATIC HORIZONTAL BANDSAWEVERISING (FRANHO) 16" X 12" MDL. SH-4033NC, new 2012, 12" rd. cap., 5 HP blade motor, 167" x 1.33" x 0.043" blade, auto. feed, touch screen control, S/N 0100249.

AUTOMATIC HORIZONTAL BANDSAWS(2) AMADA 16" X 16" MDL. HA-400, as new as 1996, 16" round cap., 7.4 HP, 180" x 1.26" x 0.04" blade, auto. feed, S/N 45600005 (1996), S/N 40601213 (1993).

HORIZONTAL BANDSAWSDOALL MDL. C-80, 12.75" rd. cap., 12" x 16" rect. cap., 144" x 1" x 0.035" saw band, band spds.: 60–350 FPM, 5 HP, 30.5" tbl. ht., 4,000-lb. tbl. load cap., roller tbl., S/N 190-74505.WELLSAW 13" X 18" MDL. 1318, 3 HP motor, 1" x .035" x 150" blade, S/N 4270.DAYTON 10" x 18" CAP. MDL. 2LKT5, 2 HP motor, S/N 10110030.

VERTICAL BANDSAWSDOALL MDL. V36 36" THROAT, blade welder grinder, tilting table, S/N 36525237.DOALL MDL. ML 16" THROAT (missing table), S/N N/A.

DOUBLE DISC SANDER/GRINDEROLIVER 30" MDL. 34-D, Furnas control, S/N 75242.

METALLURGICAL LAB SAMPLE CUT-OFF SAWBUEHLER MDL. METASERV w/Buehler cabinet stand.

WATERJET CUTTING MACHINEFLOW MDL. M2-3120B, new 2012, 80" x 122" tbl., 6.5 kW motor, S/N 120285 (missing control).

PRESSESSWAIN 35 T. CAP. OBI PUNCH PRESS.TORIN BIG RED 20 T. CAP. HYDRAULIC SHOP PRESS.HYDRAULIC SHOP PRESS (small).(2) BENCH-TYPE ARBOR PRESSES.

HYDRAULIC IRONWORKERSPIRANHA IRONWORKER MDL. P50, 1" x 4" flatbar cap., 4" x 4" x 1/2" angle cap., 1-1/2" rd. bar shear, foot pedal control, S/N 100635.UNI-HYDRO MDL. 42-14.

DOUBLE-END BORING MACHINEHEALD BORE-MATIC MDL. 221, 15" stroke, 3" cyl. dia., 7/8" rod dia., 3/8" to 10" hole dia., cutting spds.: 200–3,000 SFPM, tbl. fds: 0.5–12 IPM, 17 gal. hyd. tank, 15 HP main motor, S/N 63762.

FINISHING MACHINESGISHOLT 8" X 48" MDL. 52A SUPER FINISHER, S/N 4125-5.HAMMOND ROTO-MAX UP-FLOW MDL. RM-1 DN-06-A3.12" X 24" VIBRATORY FINISHER.

RECIPROCATING SURFACE GRINDERS(2) 8" X 16" w/horiz. spndl.

UPRIGHT BOX COLUMN DRILLYOSHIDA MDL. YUD-700, 19" x 39" tbl., 32" tbl. longitudinal travel, 6" tbl. cross travel, 7-1/2" quill stroke, spds.: 37–415 RPM, pwr. quill fds., Heidenhain 3-axis D.R.O., spndl. load meter, coolant tank and pump, quick change toolholder, S/N 5584014.

TOOLINGLATHE TOOLING; MILL TOOLING; SHOP TOOLING; CHUCKS AND ADAPTERS.

<PIRANHA MDL. P50 HYDRAULIC IRONWORKER

<FLOW WATER JET CUTTING MACHINE

>(1 OF 2) AMADA 16" X 16" AUTO.

HORIZ. BANDSAWS

EVERISING (FRANHO) 16" X 12" AUTOMATIC CNC HORIZ. BANDSAW

UNI-HYDRO MDL. 42-14 HYDRAULIC IRONWORKER

DOALL 36" VERT. BANDSAW

INSPECTION: Monday, June 6,

9:00 A.M. to 4:00 P.M. & Morning of Sale

CNC

2012

2012

PANDJIRIS 8' X 8' CAP. WELDING MANIPULATOR

6

WELDING MANIPULATORS*PRESTON-EASTIN 14' X 14' CAP. MDL. MA1212HD, new 10/2011, 14' vert. travel, 14' horiz. travel, spider base, Lincoln MAXsa10 weld controller, flux hopper, S/N MC12 12 HD224.PRESTON-EASTIN 12' X 12' CAP. MDL. MA1-212HD, new 6/2010, 12' vert. travel, 12' horiz. travel, spider base, Lincoln NA-3N and Lincoln NA-4 weld controllers, flux hopper, S/N MC1-212HD192.PANDJIRIS 20' X 22' CAP. MDL. E20X22VSC, car base w/power rotation, Lincoln NA-3S weld controller, flux hopper, S/N 400-3870.WELDWIRE 14' X 14' MDL. WW14145D, spider base, Lincoln Idealarc 1000 amp cap. pwr. source, Lincoln Mdl. NA-3N weld controller, flux hopper, S/N 9953091.PANDJIRIS 13' X 12' CAP. MDL. C7 13X12, car base w/pwr. rotation, Lincoln NA-3S weld con-troller, flux hopper, S/N 800-3885-1.PANDJIRIS 8' X 8' CAP., new 2008, rectangular skid base, Lincoln Mdl. Power Feed 10A weld controller w/ArcLink digital communication system, flux hopper, independent boom and slide controls, S/N 800-3885-1. Equipped w/Lin-coln Power Wave AC/DC 1000 amp cap. pwr. source, new 2008, S/N U1080211800.VANGUARD 8' X 8' MDL. LHQ2.5X2.5, new 2007, spider base, Lincoln Mdl. NA-3N weld controller, S/N 510728.(2) CWI 9' x 8', push car base, pwr. up/down and in/out, 110 v.CUSTOM 6' X 6', equipped w/pedestal mounted Jetline Mdl. 9600 weld controller and Jetline Mdl. 9690 arc length control, Pacemaster 1 spd. controller, Jetline Mdl. CWF-50 cold wire feeder, S/N 98-935.ARONSON 6' X 6', pwr. up/down and in/out, Lincoln NA3 Head and control, 110 v.PRESTON EASTIN 6' X 6' MDL. MA66LD, push car base, pwr. up/down and in/out, Lincoln NA3 head and control.ARONSON 4' X 4' Mdl. 1C04MA04CL-MK1T, pedestal mounted Jetline Mdl. 9600 weld con-troller and Jetline Mld. ALC-201 arc length controller, Jetline Mdl. CWF-50 cold wire feeder, S/N 8055.* NOTE: SOME UNITS ARE DISASSEMBLED

FOR SHIPPING.

PRESTON EASTIN 14' X 14' CAP. WELDING MANIPULATOR

ARONSON 6' X 6' CAP. WELDING MANIPULATOR

PANDJIRIS 20' X 22' CAP. WELDING MANIPULATOR

PARTIAL VIEW OF TANK TURNING ROLL SETS

TANK TURNING ROLL SETS & INDIVIDUAL DRIVERS

& IDLERSCUSTOM 240 T. DRIVER AND IDLER SET, custom 120 T. driver, Aronson 120 T. idler, wide triple rubber wheels.(2) KOIKE ARONSON RANSOME 180 T. CAP. DRIVER AND IDLER SETS, triple rubber wheels.KOIKE ARONSON 120 T. CAP. DRIVER AND IDLER SET, double rubber wheels.ARONSON 120 T. CAP. DRIVER AND IDLER SET, double rubber wheels.(2) KOIKE ARONSON RANSOME 120 T. CAP. DRIVER AND IDLER SETS, double rubber wheels.(2) ROMAR 60 T. CAP. DRIVER AND IDLER SETS, single rubber wheels.ARONSON 60 T. CAP. DRIVER AND IDLER SET, single rubber wheels.VANGUARD 60 T. CAP. DRIVER AND IDLER SET, single rubber wheels.VANGUARD 40 T. CAP. DRIVER AND IDLER SET, single rubber wheels.(2) CUSTOM 10 T. DRIVER AND IDLER ROLL SETS.(2) PANDJIRIS MDL. 150 TANKER ROLL-TYPE DRIVER AND IDLER SETS.MANY OTHER SEPARATE DRIVERS AND IDLERS. See catalog.

COLD WIRE FEEDERS(3) JETLINE MDL. CWF-50, S/N 90290, S/N 90204, S/N 90201 mounted on support structures w/Jetline Mdl. 9600 weld controller and Jetline Mdl. 9690 arc length controllers.

2011

LARGEQUANTITY

UP TO 240 T. CAP.

2008

7MILLER XMT 456 POWER SOURCES

LINCOLN IDEAL ARC 1,000 AMP POWER SOURCES

<SCIAKY 2,500-LB. CAP. WELDING POSITIONER

>FUME

EXTRACTORS AND

ELECTRONIC AIR CLEANER

<LINCOLN AC/DC 1000 SD POWER SOURCE

MILLER D302K 3+12 PORT. DIESEL WELDER/GENERATOR

OVER 200 WELDING POWER SOURCESLINCOLN MDL. AC1200 SUB ARC; LINCOLN MDL. AC/DC-1000 SD, new 2011; (5) LINCOLN MDL. IDEAL ARC DC-1000, as new as 2010; LINCOLN MDL. POWER WAVE 1000, new 2008; (8) LIN-COLN MDL. DC-600, new as 2012; (2) MILLER MDL. DELTAWELD 652 MIG, new 2007; AIRCO MDL. CV600 (FC DIP ARC); (60) MILLER MDL. DELTAWELD 452 MIG, as new as 2012, some w/wire feeders; (40) MILLER MDL. XMT 456 CC/CV, new 2011; (3) MILLER MDL. XMT 450 CC/CV, new 2012; (2) LINCOLN MDL. PRECISION TIG 375, new 2008; (60) MILLER MDL. DELTAWELD 452 MIG, as new as 2012, some w/wire feeders; MILLER DIMENSION 400 w/Mdl. D-64 wire feeder; (4) MILLER MDL. SYNCROWAVE 350LX TIG; (2) MILLER MDL. MAXSTAR 350, new 2009; (16) MILLER MDL. CP 302 MIG, new as 2006, some w/wire feeders; (5) MILLER MDL. XMT304, 300 amp at 60% duty cycle, new as 2001; (7) MILLER MDL. DIALARC 250 AC/DC, new 2006; (6) MILLER MDL. SYNCROWAVE 250LX; MORE.

DIESEL POWERED PORTABLE WELDER/GENERATORSLINCOLN MDL. D500K 5+3, 400 amp at 60% duty cycle, Kubota engine, 3,000 watt generator, 15 gal. fuel tank, skided; (5) MILLER MDL. D302K 3+12 CC/CV, as new as 2006, 300 amp at 60% duty cycle, Kubota engine, 12,000 watt generator, 11.5 gal. fuel tank, skidded; (2) LINCOLN MDL. D300K 3+3, new 2005, 300 amp at 60% duty cycle, Kubota engine, 3,000 watt 120 VAC generator, 15 gal. fuel tank, skidded.

WELDING POSITIONERSSCIAKY 2,500 LB. CAP. MDL. WP-180A, 40" dia. tbl. w/9" center bore, 0–135 deg. tbl. tilt, adj. ht., pendant control, S/N 6470; (2) WELDHUB MDL. WCP20 2,000 LB. CAP., new 2009, power tilt and rotation; WELDHUB MDL. WCP10 1,000 LB. CAP., new 2009, power tilt and rotation.

WELD PRE-HEATING & STRESS RELIEVING MACHINESPDS-BAR TECH MDL. 6-ZONE, (6) 300 amp triple cable-sets 50' color coded, safety yellow cabinet, on casters, S/N AH102Q101; (2) MILLER PROHEAT 35, as new as 2009, 35 kW at 100% duty cycle, uses induction heating process, S/N LJ380303G, S/N LG380304G.

PORTABLE PLASMA CUTTERSHYPERTHERM MAX200, 200 amp cap.; THERMAL DY-NAMICS PAKMASTER 150XL, 120 amp cap., S/N 3711449; THERMAL DYNAMICS CUTMASTER 151, 100 amp cap.; HYPERMAX MDL. POWERMAX 1650, 90 amp cap.; LINCOLN MDL. PYTHON, 80 amp cap., new 2008, w/25' lead; LINCOLN MDL. VIPER, 60 amp cap., new 2003.

WELDING & CUTTING ACCESSORIES

(2) MILLER LOAD BANKS; FLUX OVEN; (2) MIGHTY MAX FLUX RECOVERY SYSTEMS; (3) ROD OVENS; (29) BUG-O CAS-2100 SERIES STANDALONE AUTOMATIC HT. CONTROLS; (16) BUG-O MDL. FMD-1045 HIGH FLEX UNIVERSAL LIMIT KITS FOR HI-FLEX RAIL AP-PLICATIONS; (26) BUG-O MDL. FMD-1095 HIGH FLEX RAIL UNIVERSAL LIMIT KIT “SHORT TRAILER” FOR CIRCUMFERENTIAL AND IRREGULAR SURFACE APPLI-CATIONS; (27) BUG-O MDL. FMD-1100 HI-FLEX DRIVE CARRIAGE FOR USE w/FMD rail.

FUME EXTRACTORSSMOG HOG MDL. SH-PORTA CLEAN, 1/2 HP motor, 115 v., sgl. phase, S/N 29534; ROBO-VENT MDL. DPT-800-1, 3/4 HP motor, 13.8 amps, sgl. phase, S/N 22530.

ELECTRONIC AIR CLEANERENERGY RESOURCE CORP. MDL. 21, 1.2 HP motor, 115 v., sgl. phase, 10.4 amps, S/N 1493.

MILLER SYNCROWAVE 350 AND 250 TIG WELDERS

MILLER DELTAWELD 452 WELDERS

LINCOLN PRECISION TIG 375

LINCOLN PYTHON 80 AMP PLASMA

10AVAILABLE

60AVAILABLE

2008

2008

2011

AS NEW AS2011

AS NEW AS

2006

AS NEW AS20105

AVAILABLE

40

AVAILABLE

8

SAMPLE VIEW OF TRANSFORMERS AND POWER STARTERS

ATLAS COPCO SCREW TYPE AND CHAMPION RECIP. AIR COMPRESSORS

HUGE QTY. UNUSED PRESSURE GAUGES AND THERMOMETERS

LABORATORY FUME HOOD

MISC. SHOP AND WAREHOUSE EQUIPMENT

SAMPLE VIEW OF RAW MATERIALS

INSPECTION & TEST EQUIPMENT

MLR 3000 AMP HORIZ. MAGNET-IC PARTICLE INSPECTION UNIT, new 2013; SPC4 TEST TBL.; CAL-ENDAR MACHINE; EXTERNAL RING MACHINE; SKILL-TEC ROCKWELL HARDNESS TESTER; SCALE.

ELECTRIC FURNACELINDBERG TYPE 2530-E17, 1,700 deg. max. temp., 52 kW, S/N 9749.

HI-TEMPERATURE CABINET OVEN

GRIEVE MDL. HA-1250.

AIR COMPRESSORSINGERSOLL RAND MDL. SSR2000 ROTARY SCREW-TYPE, 75 HP motor, S/N N.A.ATLAS COPCO MDL. KT5PV80, 80 gal. tank, 22.4 CFM displacement, 18.5 ACFM @ 100 PSI, 16.6 ACFM @ 175 PSI, sgl. phase, 5 HP motor, tank mtd., S/N HOP131365.(3) ATLAS COPCO MDL. GX11 SCREW-TYPE, new 2004, 15 HP motor, 157 PSI max. pressure, 47 CFM air delivery, tank mtd., S/N 630696, S/N 629496, S/N N.A.CHAMPION MDL. VR5-8, 5 HP motor, 140–175 PSI, tank mtd., S/N R15140333.CHIAPIRINI MDL. CJ 25 APV, new 2007, 175 PSI max. pressure, tank mtd., S/N N.A.

AIR DRYERATLAS COPCO MDL. FD45, 13.9 amps total load cur-rent, 13.0 FLA, 115 v., sgl. phase input pwr., S/N 8102217794.

COOLING TOWERS(2) TORRETELLI MDL. 100/9, as new as 2011, 220/380 v., S/N 11573 (2010), S/N 13818/11 (2011).

POWER STARTERS(2) SAFETRONICS MDL. 2033941, 50–60 Hz in/out, 420 amps in/0–420 amps out, 350 HP, S/N N/A.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENTLABORATORY FUME HOOD; SHOP CABINET, 18"L. x 36"W. x 42-1/2" ht. 2-door, 58-1/2" ht. w/legs; KENNEDY ROLL-AROUND TOOLBOX, 14-5/8"L. x 20-1/2"W. x 33" ht.; (2) MIST COLLEC-TORS (for CNC Lathe); ROCKWELL PWR. DRILL, S/N 126-9916; WELDING PRESSURE POT, mtd. on metal tbl.; (2) VANGUARD FLUX RECOVERY UNITS; FLUX RECOVERY UNIT; ENGESPACK EDM 700 ELT EROSION OIL; INDUCTION COILS; (6) TRANSFORMERS; CALENDAR MACHINE; EXTERNAL RING MACHINE; SHOP WORK STATIONS AND TABLES; ASSORTED ITEMS CONSISTING OF SHOP SUPPLIES, SHOP EQUIP., RACKING.

RAW MATERIALSBAR STOCK various grades and length.

HUGE QTY. PRESSURE GAUGES & THERMOMETERS

2013

9

HYSTER 8,000-LB.CAP. FORKLIFT

HYSTER 8,000-LB. CAP. FORKLIFT

HYSTER 15,000-LB. CAP. FORKLIFT

BAUMANN 6,000-LB. CAP. ELECTRIC SIDELOADER

(1 OF 4) YALE 3,000-LB. CAP. FORKLIFT

HYUNDAI 35,000-LB. CAP. ROUGH TERRAIN FORKLIFT ROYAL 20,000-LB. CAP. COMPACT RIGGING STYLE FORKLIFT

ROUGH TERRAIN LARGE CAPACITY FORKLIFT

HYUNDAI 35,000-LB. CAP. MDL. 160D-7E, new 2011, Cummins Mdl. QSB 6.7 diesel engine, 13'4" 2-stage mast, 185" max. lift ht., dual front and single rear 12.00 x 20 large pneu. style solid tires, 12.00 x 20 rear steering tires, 8' wide carriage, fork positioner, 8' forks, enclosed cab, A/C, AM/FM/MP3/CD player, 7,770 H.O.M., S/N HHIHFT08PA0000240.

FORKLIFTSROYAL 20,000-LB. CAP. MDL. TA200 COMPACT RIGGING STYLE, LPG, 105" 2-stage mast, 107" lift ht., cushion tires, 48" forks, S/N 1089L235.

HYSTER 15,000 LB. CAP MDL. H150F, mast ht. 10'10".

HYSTER 8,000 LB. CAP. MDL. S80XLBCS, LPG, triple-stage mast 83"/171", 3-way side shifter, cushion tires, monotrol, 48" forks.

HYSTER 8,000-LB. CAP. MDL. S80XM, new 2004, LPG, 89" triple-stage mast, 185" lift ht., cushion tires, side shift, 42" forks, S/N F004V02424B.

(4) YALE 3,000-LB. CAP. GLP030, as new as 2004, LPG, 62" standard mast, 90" lift ht., pneumatic tires, 42" forks, S/N A810N03480B, S/N A810N03504B, S/N A810N03482B, S/N A810N02203Z.

2000

2004

2011

AS NEW AS2004

ELECTRIC FORKLIFTYALE 2 T. CAP. MDL. ERCO50RAN36SF083, 4,400-lb. cap., truck Type E, 2-stage mast, 128" max. ht., 18" I.D. to 28" O.D. min. fork opening, 72" I.D. to 82" O.D. max. fork opening, 36 v. Type FO battery, S/N K516073 (NOTE: sold “as is”, needs new battery).

ELECTRIC SIDELOADERBAUMANN 6,000-LB. CAP. SERIES QUADDRO EC4U MDL. EC4U30-27MC/10-87/45TP, new 2000, 16' lift ht., approx. 84" mast ht., 72" forks, 48V system, no charger, S/N 0E96459.

JIB CRANESDAYTON 1/2 T. CAP. WALL MTD., 500-lb. elec. hoist.DAYTON 1/2 T. CAP. WALL MTD., 1/2 T. elec. hoist.ANCHOR 1/2 T. CAP. PEDESTAL, electric man-guard, 1/2 T. hoist.

INSPECTION: Monday, June 6 9:00 A.M. to 4:00 P.M.

& Morning of Sale

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

METAL GASKET & BOLT MANUFACTURER PLUS PRESSURE

VESSEL/TANK FABRICATOR & PRESSURE GAUGE DISTRIBUTOR

ALL EQUIPMENT CONDENSED INTO 90,000 SQ. FT. WAREHOUSE

Items New as 2014 incl.: (7) CNC Lathes; (4) CNC Mills; (20) Engine Lathes & Mills;

(7) Bandsaws, Gasket & Bolt Manufacturing Machinery; (13) Welding Manipulators up to

20' x 22'; (25) Tank Turning Rolls/Sets; (200+) Welding Machines; Ironworkers;

Positioner; Plant Support Equip.; Forklifts up to 35,000-Lb. Cap.;

UNUSED Spiral Wound Gasket Inventory & Pressure Gauge Inventory; MORE!

HOUSTON, TEXASAUCTION

PUBLIC INVITED

AUCTION: TUES., JUNE 7 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to

BidSpotter on PMI’s website calendar. DO IT NOW.2. Either send wire transfer, or, overnight delivery service a

cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

DIRECTIONSFROM WILLIAM P. HOBBY AIRPORT: Follow the signs out of the air-port to Interstate Hwy. 45. Turn left (northward) onto I-45 and pro-ceed to Interstate Loop 610. Exit onto Loop 610 to the right (north) and proceed over the big ship channel bridge. Continue northward and eventually Loop 610 will curve to the left (west). Shortly thereafter take the Homestead Road exit. Turn left onto Homestead Road and head south a very short distance ahead and you will see auction signs on your right directing you to the sale site at the former Lamons Bolt & Seal facility at 4845 Homestead Road.

LODGINGHoliday Inn Express & Suites ...................................... (800) 345-8082 11460 East Freeway, Houston, Texas 77029

FINANCE YOUR AUCTION

PURCHASEConserve Your Cash &

Increase Your Bidding Power

AuctionLea$e Provides M&E Financing

With Approvals from $5,000 to $999,000

(800) 438-1470

Apply Online: www.AuctionLease.com

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until July 7, 2016.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS

ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harm-less from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be atten-tive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

QS-0032196