auctioneers • liquidators • appraisers › pdf › hubbell power.pdf · 2016-11-30 ·...

8
auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City, CA 91604 Sherman Hostetter, Auctioneer PA Lic. #AU2184 auction bidcast & live on-site 80 N. Burson Street, East Stroudsburg, PA Tuesday, March 11 Beginning at 10:30am www.biditup.com • email: info@biditup.com • Phone: 818.508.7034 • Fax: 818.508.3025 Thinking of having an auction? Need an appraisal? Know of a facility closure? Call: 818.508.7034, Ext. 12 Email: [email protected] Upcoming Auctions TERMS & CONDITIONS Sale Conducted by: biditup!, Subject to our customary terms of sale, (Available at the auction site on the day of the sale), and any and all amendments and modifications announced by the auctioneer at the time of the auction. The auctioneer and seller make no warranties or guarantees, expressed or implied, as to the defects in or the correctness or accuracy of the descriptions in any advertising of any item(s) being auctioned and will not be responsible for any advertising discrepancies or inaccura- cies of any kind. All items sold will be on an “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”, basis “WITHOUT EXCEPTION” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE”. AUCTIONEER AND SELLER MAKE NO WARRANTIES OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED AS TO THE NATURE, QUALITY,VALUE OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR)SUITABILITY FOR ANY USE. AUC- TIONEER AND SELLER EXPRESSLY AND SPECIFICALLY DISCLAIM WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AUCTIONEER SHALL NOT BE LIABLE FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES. It shall be the buyer’s obligation to verify information and descriptions of property prior to sale. biditup!, and its advertising agency assume no liability for errors or omissions in this brochure. The auctioneer does not warrant the age,accu- racy, genuineness, authenticity, description, weight, count or measure of any listings specified herein. Although it is not likely, auction sales are subject to cancellation or postponement, and sometimes items are withdrawn from the sale, kindly contact bid- itup!, prior to travel as there will be no reimbursements. On the day of the sale, all suc- cessful bidders must immediately pay the full purchase price in cash, certified funds, cashiers check, wire transfer or company check with a letter from the buyer’s bank guaranteeing unqualified payments to biditup! This letter is valid until 30 working days after the auction sale.] Company c hec ks without letter from bank guar anteeing unqualified payment will not be accepted. The failure to make payment promptly shall be considered default and each lot or lots so purchased will be placed for resale. The buyer must pay the total invoice price for all the lots purchased before any removal can begin. All buyers must pay applicable sales tax (unless evidence of exemption is provided to auctioneer’s satisfaction). Buyers are responsible for the transportation, associated costs and risks involved in the removal of purchased item(s). Certain items may contain residual chemicals and/or hazardous materials. The purchaser(s) hereby indemnify and hold harmless the auctioneer and seller from any and all damages, claims or liability from any injuries to persons or property of any type whatsoever caused during the sale of, during the removal, or during use or operation of the pur- chased item(s). If you are unable to attend, please contact us regarding placing a proxy bid. PLEASE NOTE: ALL SALES ARE SUBJECT TO A BUYER'S PREMIUM. BUYER’S PREMIUM, 10%. INTERNET BUYER’S, ADDITIONAL 2%. CREDIT CARD USERS, ADDITIONAL 3%. FIRST CLASS PRE-SORT MAIL U.S. POSTAGE P A I D PERMIT NO. 32365 LOS ANGELES, CA Manufacturer of Pole Line Hardware Featuring: Late Model Forging, Fabricating, Stamping Equipment & Machine Tools HUBBELL HUBBELL POWER SYSTEMS, INC. ASSETS NO LONGER REQUIRED IN THE CONTINUING OPERATIONS OF: THURSDAY, FEBRUARY 27: NEW ENGLAND IRON, LLC Complete Shell Molding Gray Iron Foundry • Springfield, MA Surplus Assets of: WEDNESDAY, MARCH 12: COOPER CROUSE-HINDS Manufacturer of Electrical Connectors Featuring: Thread Rollers, Cut-Offs, Machining & Presses • Syracuse, NY By Order of Howard B. Samuels, Not Individually, But as Assignee for the Benefit of Creditors of: MARCH 18, 19, 20 & 21: CAPITAL FASTENER D/B/A RELIANT INDUSTRIES “The Largest Bolt & Fastener Sale Ever!”• Rock Falls,IL & Bedford Park, IL. WEDNESDAY, APRIL 23: GARVIN INDUSTRIES Stamping Facility • Grand Haven, MI THURSDAY, APRIL 24: BURGESS NORTON MANUFACTURING CO. Machine Facility & Foundry • Mukegon, MI Assets No Longer Required In the Continuing Operations of: Assets No Longer Required In the Continuing Operations of: TUESDAY, APRIL 29: COASTCAST CORPORATION Investment Casting Foundry • Gardena, CA Assets No Longer Required In the Continuing Operations of:

Upload: others

Post on 30-Jun-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

auctioneers • liquidators • appraisers

11426 Ventura Blvd. Second FloorStudio City, CA 91604

Sherman Hostetter, AuctioneerPA Lic. #AU2184

auctionbidcast & live on-site

80 N. Burson Street, East Stroudsburg, PA

Tuesday, March 11

Beginning at 10:30am

www.biditup.com • email: [email protected] • Phone: 818.508.7034 • Fax: 818.508.3025

Thinking of having an auction?

Need an appraisal?

Know of a facility closure?

Call: 818.508.7034, Ext. 12Email: [email protected]

Upcoming Auctions TERMS & CONDITIONSSale Conducted by: biditup!, Subject to our customary terms of sale, (Available at theauction site on the day of the sale), and any and all amendments and modificationsannounced by the auctioneer at the time of the auction. The auctioneer and sellermake no warranties or guarantees, expressed or implied, as to the defects in or thecorrectness or accuracy of the descriptions in any advertising of any item(s) beingauctioned and will not be responsible for any advertising discrepancies or inaccura-cies of any kind. All items sold will be on an “AS IS”, “WHERE IS”, and “WITH ALLFAULTS”, basis “WITHOUT EXCEPTION” and “WITH REMOVAL AT BUYER’S RISK ANDEXPENSE”. AUCTIONEER AND SELLER MAKE NO WARRANTIES OR GUARANTEES OFANY KIND, EXPRESSED OR IMPLIED AS TO THE NATURE, QUALITY, VALUE OR CONDITIONOF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR)SUITABILITY FOR ANY USE. AUC-TIONEER AND SELLER EXPRESSLY AND SPECIFICALLY DISCLAIM WITHOUT LIMITATIONANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.AUCTIONEER SHALL NOT BE LIABLE FOR SPECIAL, CONSEQUENTIAL OR INCIDENTALDAMAGES. It shall be the buyer’s obligation to verify information and descriptions ofproperty prior to sale. biditup!, and its advertising agency assume no liability forerrors or omissions in this brochure. The auctioneer does not warrant the age,accu-racy, genuineness, authenticity, description, weight, count or measure of any listingsspecified herein. Although it is not likely, auction sales are subject to cancellation orpostponement, and sometimes items are withdrawn from the sale, kindly contact bid-itup!, prior to travel as there will be no reimbursements. On the day of the sale, all suc-cessful bidders must immediately pay the full purchase price in cash, certified funds,cashiers check, wire transfer or company check with a letter from the buyer’s bankguaranteeing unqualified payments to biditup! This letter is valid until 30 workingdays after the auction sale.] Company checks without letter from bank guaranteeingunqualified payment will not be accepted. The failure to make payment promptly shallbe considered default and each lot or lots so purchased will be placed for resale. Thebuyer must pay the total invoice price for all the lots purchased before any removalcan begin. All buyers must pay applicable sales tax (unless evidence of exemption isprovided to auctioneer’s satisfaction). Buyers are responsible for the transportation,associated costs and risks involved in the removal of purchased item(s). Certain itemsmay contain residual chemicals and/or hazardous materials. The purchaser(s) herebyindemnify and hold harmless the auctioneer and seller from any and all damages,claims or liability from any injuries to persons or property of any type whatsoevercaused during the sale of, during the removal, or during use or operation of the pur-chased item(s). If you are unable to attend, please contact us regarding placing aproxy bid. PLEASE NOTE: ALL SALES ARE SUBJECT TO A BUYER'S PREMIUM.BUYER’S PREMIUM, 10%.INTERNET BUYER’S, ADDITIONAL 2%.CREDIT CARD USERS, ADDITIONAL 3%.

FIRST CLASS PRE-SORTMAIL U.S. POSTAGE

P A I DPERMIT NO. 32365LOS ANGELES, CA

Manufacturer of Pole LineHardware Featuring: Late ModelForging, Fabricating, Stamping

Equipment & Machine ToolsHUBBELL HUBBELL POWER

SYSTEMS, INC.

ASSETS NO LONGER REQUIRED IN THECONTINUING OPERATIONS OF:

THURSDAY, FEBRUARY 27: NEW ENGLAND IRON, LLCComplete Shell Molding Gray Iron Foundry • Springfield, MA

Surplus Assets of:

WEDNESDAY, MARCH 12: COOPER CROUSE-HINDSManufacturer of Electrical Connectors Featuring: Thread Rollers, Cut-Offs,Machining & Presses • Syracuse, NY

By Order of Howard B. Samuels, Not Individually, But as Assignee for the Benefit of Creditors of:

MARCH 18, 19, 20 & 21: CAPITAL FASTENER D/B/A RELIANT INDUSTRIES“The Largest Bolt & Fastener Sale Ever!”• Rock Falls,IL & Bedford Park, IL.

WEDNESDAY, APRIL 23: GARVIN INDUSTRIESStamping Facility • Grand Haven, MI

THURSDAY, APRIL 24: BURGESS NORTON MANUFACTURING CO.Machine Facility & Foundry • Mukegon, MI

Assets No Longer Required In the Continuing Operations of:

Assets No Longer Required In the Continuing Operations of:

TUESDAY, APRIL 29: COASTCAST CORPORATIONInvestment Casting Foundry • Gardena, CA

Assets No Longer Required In the Continuing Operations of:

Page 2: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

auctionbidcast & live on-site

www.biditup.com

Auction

Preview

Location80 N. Burson Street E. Stroudsburg, Pennsylvania

Monday, March 109am to 4pm and morning of sale

Tuesday, March 11Beginning at 10:30am, Eastern

Manufacturer of Pole Line Hardware Featuring:Late Model Forging, Fabricating,

Stamping Equipment & Machine Tools

HUBBELL POWER SYSTEMS, INC.

ASSETS NO LONGER REQUIRED IN THE CONTINUING OPERATIONS OF:

HUBBELL

1994

Page 3: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

auctionbidcast & live on-site

AuctionTuesday, March 11Beginning at 10:30am, Eastern

Monday, March 109am to 4pm and morning of sale

80 N. Burson StreetE. Stroudsburg, Pennsylvania

Preview

Location

Directions

To Schedule an Auction or an Appraisal, Call Our Studio City, CA Office at 818.508.7034.Page 2

PRESSES

1- 290 TON MINSTER S.S.D.C. PRESS, MDL. #50-8, s/n 50-8-6723, Rebuilt 1991, 8” Stroke, 14” SlideAdjustment, 20 SPM, 6” Bolster, 60” Bed, Twin End Drive,Enclosed Gearing, Double Back Geared, Windows, T-Slotted Bolster, T-Slotted Ram, Dual Palm Controls, AirClutch, Air Counter Balance, Central Lube.

1- 1994 250 TON PACIFIC HYDRAULIC C-FRAME PRESS,MDL. #250-O.B.S/C, s/n A1189, 12” Stroke, 58” x 34” Bed,36” x 28” T-Slotted Ram, 5” T-Slotted Bolster, 8-Point Gibbing,Light Curtains Digital Program, Cushion, CNC Controls.

1- 1980 150 TON AIDA GAP FRAME PRESS, MDL. #C1-15(2),s/n 00215-1343, 7.8” Stroke, 3.9” Adjustment, 15.7” DieSpace, 45 SPM, 62” x 30” Bed, 27” x 22” Ram, Air Clutch& Brake, Air Counter-balances, Link SS501 Light Curtain& Control.

1- 1980 150 TON AIDA GAP FRAME PRESS, MDL. #C1-15(2),s/n 00215-1472, 7.8” Stroke, 3.9” Adjustment, 15.7” DieSpace, 45 SPM, 62” x 30” Bed, 27” x 22” Ram, Air Clutch &Brake, Air Counter-balances.

(Continued on Next Page)

(13) PRESSES

110 TON USI CLEARING O.B.I. PRESS, MDL. #110

250 TON PACIFIC HYDRAULIC C-FRAME PRESS, MDL. #250-O.B.S/C

125 TON NIAGARA DOUBLE CRANK O.B.I.PRESS, MDL. #BI-5

150 TON AIDA GAP FRAME PRESS,MDL. #C1-15(2)

290 TON MINSTER S.S.D.C. PRESS, MDL. #50-8

From Lehigh Valley International Airport(Serving Allentown, Bethlehem & Easton):Exit Lehigh Valley Airport onto Route#22 East. Take Route #22 East for 8Miles to Route #33 North. Take Route#33 North for 21 Miles to Route #209North. Continue on Route #209 Northfor 4 Miles to Route #80 East. Mergeonto Route #80 East for 3 Miles to Exit#308, Prospect Avenue. After Exiting atExit #308, Turn Right (North) ontoProspect Avenue for 7/10 Mile untilProspect Deadends into Analomink.Turn Left (West) onto Analomink for2/10 Mile to North Cortland Street(Business Route 209 North). Turn Right(North) onto North Cortland Street for1/2 Mile to Burson Street (Pizza Hut onthe Right Corner). Turn Right (East)onto Burson Street for 2/10 Miles toHubbell. Plant is Located on the LeftHand Side. Watch for Auction Signs.

From Newark, New Jersey Airport:Go West on I-78 to NJ Route 24 West.Take NJ Route 24 to I-287 North. Take I-287 North to I-80 West. From I-80West, Exit #308, Prospect Avenue. AfterExiting at Exit #308, Turn Right (North)onto Prospect Avenue for 7/10 Mile untilProspect Deadends into Analomink.Turn Left (West) onto Analomink for2/10 Mile to North Cortland Street(Business Route 209 North). Turn Right(North) onto North Cortland Street for1/2 Mile to Burson Street (Pizza Hut onthe Right Corner). Turn Right (East)onto Burson Street for 2/10 Miles toHubbell. Plant is Located on the LeftHand Side. Watch for Auction Signs.

HUBBELL

HUBBELL POWER SYSTEMS, INC.

ASSETS NO LONGER REQUIRED IN THECONTINUING OPERATIONS OF:

1994

Page 4: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

PRESSES

To View a List of Liquidations and Upcoming Auctions, Visit Our Website: www.biditup.com Page 3

(13) PRESSES

100 TON NIAGARA DOUBLE CRANK O.B.I. PRESS,MDL. #B1-4-1/2

110 TON BLISS O.B.I. PRESS, MDL. #C-110

75 TON NIAGARA O.B.I. PRESS,MDL. #M75

1- 125 TON NIAGARA DOUBLE CRANK O.B.I. PRESS,MDL. #BI-5, s/n 36240, Age 1960, Rebuilt 1993, 6”Stroke, 4” Adjustment, 16” Shut Height, 35” x 25” Bed, 30”x 21” Ram, 40 SPM, Air Clutch, Air Counterbalance, SurgeTank, Link SS501 Light Curtain & Controls.

1- 110 TON USI CLEARING O.B.I. PRESS, MDL. #110, s/n 542062, 10” Stroke, 5” Adjustment, 18-1/8” Shut Height,35 SPM, 39” x 30” Bed, 16.5 Ton Cushion, Air Clutch, AirCounterbalance, Motorized Ram Adjustment, Link Control,Link Black Light Curtains.

1- 1984 110 TON BLISS O.B.I. PRESS, MDL. #C-110, s/n H69390, 6” Stroke, 4” Adjustment, 17” Shut Height, 42” x27” Bed, 28” x 20” Ram, 55 SPM, Air Clutch, AirCounterbalance, Controls, Fair Condition, Single Back Geared.

1- 100 TON NIAGARA DOUBLE CRANK O.B.I. PRESS,MDL. #B1-4-1/2, s/n 38264, 4” Stroke, 15-3/4” ShutHeight, 57 SPM, 27” x 37” Bed, 3-1/2” Adjustment, 27” x20” Ram, Air Clutch, Air Counterbalance, Surge Tank, LinkSS501 Light Curtain & Controls .

1- 1980 80 TON AIDA GAP FRAME PRESS, MDL. #C1-8(2), s/n 00208-2490,, 6.29” Stroke, 12.6” Shut Height, 52” x 23” Bed,29” x 18” Ram, 3.15” Slide Adjustment, 60 SPM, Air Clutch, AirCounterbalance, Link Black Light Curtains.

1- 1980 80 TON AIDA GAP FRAME PRESS, MDL. #C1-8-(2),s/n 002082491, 6.29” Stroke, Air Grip Feed, Coil Cradle,Link Electric SS501 Light Curtain Control.

1- 1971 75 TON NIAGARA O.B.I. PRESS, MDL. #M75,s/n 46025, 8” Stroke, 19-3/4” Shut Height, 4” Adjustment, 36”x 24” Bed, 15” x 17” Ram, 42 SPM, Air Clutch & Brake, SurgeTank, Link Control, Air Cushion, Link Black Light Curtains.

1- 50 TON MDL. #GF835 ENERPAC HYDRAULIC SHOPPRESS.

1- BLISS O.B.I. PRESS, MDL. #28-1/2, s/n H46658-HP32283, 8” Stroke, 36” x 30” Bed, 3-1/2” Bolster, AirClutch, Single Back Geared, Motorized Ram Adjustment,Updated Link Mdl. #SS501 Electric Controls - s/n 6790,Link Black Curtains.

50 TON MDL. #GF835 ENERPAC HYD. SHOP PRESS BLISS O.B.I. PRESS,MDL. #28-1/2

80 TON AIDA GAP FRAME PRESS, MDL. #C1-8(2)

Best Western Inn700 Main Street, Stroudsburg, PA (Exit #307).570-421-2200Hampton Inn114 South 8th Street,Stroudsburg, PA (Exit #307).570-424-0400Clarion Hotel1220 West Main StreetStroudsburg, PA (Exit #305).570-420-1000Budget MotelI-80 Exit 308E. Stroudsburg, PA (Exit #308).888-233-8144 or 570-424-5451Super 8 Motel340 Greentree Drive, E. Stroudsburg, PA (Exit #308).570-424-7411

biditup! is very delighted to have beenselected by Hubbell Power Systems, Inc.to conduct this On-site and BidcastAuction of the assets.

The auction will feature a wide range of assets including: Late Model ForgingEquipment, Fabricating, Fastener, andStamping Equipment, Upsetters, NutFormers, Threaders, Cranes, MachineTools and Shop Equipment including:grinders, lathes, milling machines, drills,saws, furnaces & much more!

Thank you in advance for your interest. Welook forward to your participation either inperson or at www.biditup.com onAuction Day!

biditup! Note

BidcastAre you unable to make it to E. Stroudsburg,PA? Not a problem! With Biditup’s BidcastTechnology, anyone from anywhere can bidat this auction. A Bidcast is a traditionalwalk-around auction that allows you toactively bid with bidders on-site from thecomfort of your own home or office. All youneed is a touch-tone phone and a computerwith Internet access.In a Bidcast, you are bidding real time withthe bidders on the auction floor as well asother bidders around the world. It’s just likebeing there.You will hear the auctioneer through the phone as the current asset is displayedon your screen. You press *1 on your telephone keypad to begin bidding andpress # to stop the bidding.Bidcast auctions are secure, easy andconvenient. Save time and money by bidding online.Go to www.biditup.com to download thefree software and we’ll see you ONLINE!

LodgingRecommendations

1984

2AVAILABLE

In order to better facilitate the buyers and cre-ate a controlled atmosphere, rigging will beprovided exclusively by B.W. Wright Rigging.

Rigger Information

www.biditup.com

The Industry Sourcefor Online Auctions &

Liquidations

Page 5: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

HAMMERS & FORGING

1- 1981 700 TON MAXI FORGING PRESS, s/n 26211, 8”Stroke, 22” Shut Height, 70 SPM, Air Clutch Mounted onCrank Shaft, Disc Brake, Bottom Knockout, Flywheel, WedgeAdjustment to Die Seat, Automatic Single Point Lubrication.

1- 1983 2-1/2” HILL ACME UPSETTER, s/n 18176, Air Clutch,Swing Down Stock Stop, Jib Hoist for Tool Change,Automatic Single Point Lubrication, Excellent Condition.

1- 2” HILL ACME UPSETTER, s/n 17200, Air Clutch, DropDown Stock Stop, Automatic Single Point Lubrication.

1- 1980 1-1/2” HILL ACME UPSETTER, s/n 18158, AutomaticSingle Point Lubrication, Tool Jib, Stock Stop, Motor &Controls, Excellent Condition.

1- 1980 1-1/2” HILL ACME UPSETTER, s/n 18159, Air Clutch,Stock Stop, Tool Jib, Motor & Controls, Automatic SinglePoint Lubrication, Excellent Condition.

FORGING

HAMMERS

2,500 LB. CHAMBERSBURG (CECO) AIR DROP HAMMER, MDL. #25CD 700 TON MAXI FORGING PRESS

2-1/2” HILL ACME UPSETTER

2” HILL ACME UPSETTER

1-1/2” HILL ACME UPSETTER

1-1/2” HILL ACME UPSETTER

2,000 LB. CHAMBERSBURG (CECO) AIR DROP HAMMER

1- 1981 2,500 LB. CHAMBERSBURG (CECO) AIR DROPHAMMER, MDL. #25CD, s/n M2767-19, Inserted Guides,Foot Control.

1- 2,000 LB. CHAMBERSBURG (CECO) AIR DROPHAMMER, s/n R84360/2, Rebuilt in 1980’s, Air DropInserted Guides, Foot Pedal Control.

LARGE QUANTITY OF UPSETTER SPARE PARTS.

1981 1981

1983 1980 1980

Page 4

Page 6: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

FABRICATING, THREADING/POINTING, NUT FORMING & TAPPING

NUT FORMING2- 1980’S 5/8” NUTAPNUT FORMING & TRIMMING

LINE, MDL. #M-16, ASTEC Inc. Mdl. #PD3/4-1-FDPower Driven Uncoiler - s/n 099341003 - 3/4” HighCarbon, 1” Low Tensile, Power Straightening & Feed Rolls;Nutap Nut Press - 1/2” - 5/8” Hexagon & Square Nuts, 115Nuts Per Minute, Air Clutch; 4-Station Flattening, Forming& Cutting Machine & 2-Station Pierce & Punch Machine,25 HP, 1000 RPM, Large Qty of Nut Form Tooling & Parts.

3- 1980’S 3/4” NUTAP DOUBLE HEAD TAPPINGMACHINES, Mdl. #MAS20, FMC Belt Loaders.

1- 1980’S KAUFMAN TRANSFER TYPE TAPPINGMACHINE, 4-Station, Double Drill, Double Tap,Double Tap, Loading Station, Automatic Clamping,48” Trunion, 5 HP Tapping Drive, Praab Metal SlatDischarge Conveyor.

TAPPING1- 250 TON CHICAGO/D & K PRESS BRAKE, MDL.#610C, s/n P7891, 12’ Bed, 8” Gap, Bolt on RamFlanges, Air Clutch & Brake, Surge Tank, MotorizedRam Adjustment.

1- 100 TON WILLIAMS & WHITE HYD. BULLDOZER, s/nC3163, 60” x 10” Cross Head Dimensions, 60” Die Space,T-Slotted.

1- 3’ X 3’ X 3/8” & 2” PIPE THOMAS HORIZ. ANGLEBENDING ROLL, MDL. #2A, s/n 1212, Pipe Dies, OilGear Hydraulics.

1- 1994 1-1/4” MILLING OR 7/8” THREADING LANDISHOLLOW MILL SINGLE SPINDLE CNC HI-SPEEDTURNING & THREADING MACHINE, MDL.#3000CTR, s/n 300TTM-01, Coolant COOLERS INC.Refrigerated Cooler & NC Controls, 15 KW Motor,Dynapro LCD.

1- 1” WATERBURY FARRELL HAND FEED THREADROLLER, MDL. #60, s/n 143236-129, V-Ram, 4” Die Pocket,Metal Slat Discharge Conveyor, 20 HP Motor & Controls.

1- APPROX. 1” SHAVE TOOL POINTER, Less CutterHead, Air Grip.

1- 1/2” APPROX. ECONOMY SHAVE TOOL POINTER,Mechanical Clamp.

THREADING/POINTING

FABRICATING

1-1/4” MILLING OR 7/8” THREADING LANDIS HOLLOW MILL SINGLE SPINDLE CNC HI-SPEED TURNING & THREADING MACHINE

100 TON WILLIAMS & WHITE HYD. BULLDOZER

250 TON CHICAGO/D & K PRESS BRAKE, MDL. #610C

1” WATERBURY FARRELL HAND FEED THREAD ROLLER, MDL. #60

5/8” NUTAPNUT FORMING & TRIMMING LINE, MDL. #M-16

3/4’ NUTAP MDL. #MAS20

KAUFMANTRANSFER TYPETAPPINGMACHINE

1994

1980’S

1980’S 1980’S

3AVAILABLE

Page 5

2AVAILABLE

Page 7: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

COIL/FEED EQUIPMENT, MATERIAL HANDLING & VARIOUS TOOL ROOM EQUIPMENT

(5) LATHES1- 16” MONARCH LATHE, 18-1/2” Actual

Swing, 54” Distance Between Centers, TaperAttachment, Lead Screw, Thread Dial,Hardened Ways, 3-Jaw & 4-Jaw Chucks.

1- 12” X 36” SOUTHBEND ENGINE LATHE,Lead Screw, 3-Jaw Chuck, Taper.

1- 15” X 22” LANSING GAP BED ENGINELATHE, MDL. #G, 42” Centers, 3-JawChuck, Taper Attachment, Lead Screw,Thread Dial, 2000 RPM.

1- 16” X 48” LEBLOND DUAL DRIVEENGINE LATHE, Lead Screw, Thread Dial,Taper Attachment, 4-Jaw Chuck.

1- 16” X 20” KINGSTON GAP BED ENGINELATHE, MDL. #HL1500, s/n 5233, LeadScrew, Thread Dial, 3-Chuck, TaperAttachment, Steady Rest, 1500 RPM, SetUp for English & Metric.

1- JOHANSON DRILL, Power Feed, 14”x 20” Table, 1800 RPM.

1- 4’ X 9” CARLTON RADIAL ARM DRILL,s/n 0A769, 2000 RPM, Box Table.

1- 3’9” CINCINNATI BICKFORDRADIAL DRILL, Box Table, 1200 RPM.

1- JOHANSON DRILL.1- 3’ X 9” WILLIS BERGO RADIAL

DRILL, MDL. #FS1000, 1200 RPM,Power Feed, Box Table, Vise.

3- 2-1/4” SOLBERGA MDL. #SE135SINGLE SPINDLE VERTICALDRILLS, s/n 1355, 1356 & 1358, 2-1/4” Spindle Dia., 12” Overhang, 20” x16” Table, Power Feed, 792 RPM.

1- 2” FOSDICK 3-SPINDLE FLOORDRILL, 2” Spindle, 24” x 52” Table,Power Feed, Quick Change Headstock.

1-SINGLE SPINDLE DRILL.

(10) DRILLS

(6) SAWS1- 26” DOALL BAND SAW, s/n 2492152,

Welder.1- 16” DOALL BAND SAW, s/n 2080771921,

Band Welder.1- KALAMAZOO MANUAL ABRASIVE SAW.1- DOALL ROLL-IN VERTICAL BAND SAW,

MDL. #U1421, s/n 37560212, Roller StockConveyor, Manual Clamp.

1- 12” X 12” MARVEL HORIZONTAL HACKSAW, s/n 21483, 24” x 32” Hands for DieFlipper.

1- DEWALT RADIAL ARM POWERMATICTABLE SAW.

1- OLIVER TOOL & CUTTER GRINDER,MDL. #HDACE, s/n 1231, Universal Table,Dividing Head.

1- 8” X 16” BLOME SURFACE GRINDER,MDL. #816, Magnetic Chuck.

1- 8” X 18” MHT HYDRAULIC SURFACEGRINDER, Electro-Magnetic Chuck, Controls.

1- 6” X 18” BOYER SCHULTZ “HUSKY LINE”SURFACE GRINDER, MDL. #3A, s/n 5056,Late Mdl., Permanent Magnetic Chuck.

1- 1980 42” SHIBURA, VERTICAL SPINDLESURFACE, MDL. KRTC-11A, s/n 483,Segmented Wheel Coolant, Magnetic Separator.

1- GRAND RAPIDS DOUBLE END DRILLGRINDER, MDL. #CD2.

1- LANDIS DOUBLE END CHASER GRINDER.

1- BELT GRINDER.

1- TOOL POST GRINDER.

2- 20” ROCKFORD HYDRAULIC SHAPER,s/n 104HB, Universal Table & Vise.

1- 20” OHIO MECHANICAL SHAPER.

1- PORTER CABLE VERTICAL BELTSANDER, MDL. #BG.

(5) MILLS1- TREE UNIVERSAL VERTICAL MILL, 1-1/2

HP, 10” x 42” Table.

1- LAGUN VERTICAL MILL.

1- CINCINNATI HORIZONTAL MILL, MDL.#2ML, s/n 5J2U1U61, 9” x 53” Table.

1- LAGUN UNIVERSAL VERTICAL MILL, 11”x 54” Table, ANILAM Mini Wizard DigitalReadout, Coolant, Vise.

1- LANGUN UNIVERSAL VERTICAL MILL,MDL. #FTV-2, 9” x 48” Table, Vise, 1200 RPM.

(13) GRINDERS, SHAPERS & SANDER

1- 4,000 LB. DALLAS COIL CRADLE, s/n 13892, 12” W x 60” Dia.Capacity.

1- 12” X 18” COILMATIC DOUBLE GRIP AIR FEED, MDL. #RF1218,s/n 7752300921, 12” Straightener.

1- 12” X .250” OR 18” X .194” DALLAS DIGITAL FEED, MDL.#DRF418-RH74133 XYCOM, s/n 20282, Edge Guides & Loop Control.

1- 12” X 12” X .090” DALLAS AIR GRIP FEED, MDL. #D200, s/n 13893,12” x 2” Dia. Straightener.

2- APPROX. 12” X 2,000 LB. COIL CRADLES.

1- 20” X .150 ROWE COIL CRADLE & STRAIGHTENER, MDL. #C3-20/8J,s/n 23321, 60” Coil O.D., 8,000 Lbs., .020 - .150” Gauge Thickness, 9-RollStraightener w/Entry & Exit Pinch Rolls, Hold Down Roll & Peeler.

2- APPROX. 2,000 LB. X 30” NUTAP MOTORIZED WIRE DECOILER,Pre-Straightening & Feed Rolls.

1- 12” X 18”AIR GRIP FEED, MDL. XCF8-1218, S/N 72CM30222,12” 5-Roll Straightener - Approx. 3” Roll Dia.; Conveyor Feed &Magnetic Destacker.

1- 20” WIDE EGAN PRESS FEED LINE - Hand of Line Right to Left,36” Mandrel Length, 24” Coil I.D., 60” Coil O.D, 16” - 20” HydraulicMotorized Expansion Consisting Of: Caddy; 10,000 Lb. Egan Mdl.#M1001-36 Mandrel Type Uncoiler - s/n 4145, Age 1980, 2” - 70”Feed Length, 21 - 85 FPM @ 180 Deg., 30 - 125 FPM @ 270 Deg.,35 SPM; Floor Mounted Coil Car; Peeler/Stripper; Mdl. #S40-620Egan Power Straightener - s/n 4146 - 7-Roll, 4” Roll Dia., QuickOpen Entry & Exit Pinch Rolls; 20’ x 20” Air Actuated Strip Guide;20” Egan Mdl. #CA71-24S Digital Feeder - s/n 4147.

2- 7-1/2 TON P & H/PHILADELPHIA TRAMRAIL CRANE, 20’ Span, 26’ Lift, 230 VoltAC, Motorized Hoist, Floor Control, FreeStanding Runaway.

1- 2 TON CLEVELAND TRAMRAIL CRANE,20’ Span.

LARGE QUANTITY OF PALLET RACKING.

MISC. INCLINED CONVEYORS.

COIL/FEED EQUIPMENT

MATERIAL HANDLING

20” WIDE EGAN PRESS FEED LINE

12” X 12” X .090” DALLAS MDL. #D200 AIR GRIP FEED

1980 42” SHIBURA VERTICAL SPINDLE SURFACE GRINDER, MDL. #KRTC-11A

15” X 22” LANSING GAP BED ENGINE LATHE, MDL. #G & 16” X 48” LEBLOND DUAL DRIVE ENGINE LATHE

APPROX.2,000 LB.

X 30”NUTAP

MOTORIZED WIRE

DECOILER

19801980

Page 6

Page 8: auctioneers • liquidators • appraisers › pdf › Hubbell Power.pdf · 2016-11-30 · auctioneers • liquidators • appraisers 11426 Ventura Blvd. Second Floor Studio City,

STOCK & HOPPERS, FURNACES, TOOL ROOM, MISCELLANEOUS & FORK TRUCKS

STOCK & HOPPERSOver 200,000 Lbs. Coiled Stock, CoiledStrip Stock, Ground Stock & Bar Stock •Approx. 80,000 Lbs. of Flat Bar, Profile,Angle & Tubing • Approx. 80,000 Lb. CoiledSteel • Hydraulic Dump Hopper • LargeQuantity of 30” x 38” x 24” High StackingHinged Dump Hoppers.

1- 8,000 LB. CLARK TYPE G FORKTRUCK, MDL. #C500YS80, s/n Y685-78-8050, Pneumatic Tires, LP Gas.

1- 8,000 LB. HYSTER FORK TRUCK, HardTire, LP Gas, 2-Stage.

1- 6,000 LB. YALE FORK TRUCK, HighVisibility Mast, 3-Stage, Hard Tire, LPGas, Bed Platform.

1- 6,000 LB. YALE FORK TRUCK, HardTires, LP Gas, High Visibility Mast, TripleStage, Fork Shifters.

1- 6,000 LB. YALE FORK TRUCK, MDL.#LC60, LP Gas, High Visibility Mast, 3-Stage, Hard Tire, Fork Shifters.

1- 6,000 LB. HYSTER FORK TRUCK, MDL.#S60ES, s/n D002D-6872A, Hard Tires,Forks, LP Gas.

1- 6,000 LB. HYSTER FORK TRUCK, MDL.#S60ES, s/n D002D-08884A, Hard Tires,Forks, LP Gas.

1- 6,000 LB. CLARK FORK TRUCK, HardTires, LP Gas, Machinery Boom.

1- 6,000 LB. HYSTER FORK TRUCK, HardTire, LP Gas.

1- 6,000 LB. YALE FORK TRUCK, 2-Stage, Thruthe Mast, Fork Shifters, Hard Tire, LP Gas.

1- 5,000 LB. HYSTER FORK TRUCK, MDL.#S50E, s/n DOO2D08427A, Hard Tire, LPGas, 2-Stage.

1- 5,000 LB. YALE FORK TRUCK, TRUCK#GLCO50RCJUAE083, s/n Y430429,Hard Tires, High Visibility Mast, 3-Stage,Fork Shifters, LP Gas.

1- 5,000 LB. YALE FORK TRUCK, TripleStage, Hi-Visibility Mast, Fork Shifter, LPGas, Hard Tire.

1- 5,000 LB. HYSTER FORK TRUCK, MDL.#S50E, s/n 00020050527, LP Gas, Hard Tire.

1- 4,500 LB. TOYOTA FORK TRUCK, MDL.#5FGCU25, s/n 70229, LP Gas, Hard Tire,High Visibility Mast, Double Stage,Hydraulic Fork Shifters.

1- 4,000 LB. CLARK PALLET TRUCK,MDL. #HWP40C, s/n 00734465FA.

1- 4,000 LB. HYSTER REACH TYPEPALLET TRUCK, MDL. #N40ER, s/nC138DO1561H, High Visibility Mast.

1- 3,500 LB. YALE TYPE E ELECTRICPALLET TYPE REACH TRUCK, MDL.#NRO35AANM24SFO89, s/n N487488,24 Volt.

1- 3,000 LB.REACH TYPE PALLETTRUCK, MDL. #ELECTRIC 30.

2- 2,000 LB. PRESTO-LIFT HYDRAULICLIFT TRUCKS, s/n B7662002 &B7662000.

1- 1000 LB. JLG MANLIFT, MDL. #30F, s/n7507, 30” x 48” Platform, 500” Reach, Two-Wheel Drive, Real Wheel Steering,Pneumatic Tires.

2- RMX PALLET TRUCK, BATTERYCHARGERS.

1- AMERICAN LINCOLN FLOORSCRUBBER, MDL. #579-411, s/n442111.

1- 300 LB. GENIE PERSONAL LIFT, MDL.#PLI-24P, s/n 3188-1815-8, 24’ Lift.

1- BAIRD ELECTRIC PLATFORM PALLETTRUCK.

1- BARRET PALLET TRUCK.

TOOL ROOMSERVO UNI-TECH Tap Extractor, s/n5152, 18” x 24” Table • Die Filer • BarDischarge & Loading Apparatus • W.B.KNIGHT Mdl. #50 Vertical Jig Borer, 18”x 60” Table, 2,000 RPM • ROCKWELLHardness Tester, Mdl. #4OUR, s/n97274806, Large Quantity of Misc.Tooling & Supplies • 30” x 48” SafetyClean Parts Washer • Large Quantity ofLANDIS Chaser’s • VIDMARS & Tooling •Large Quantity of Self DumpingHoppers • Miscellaneous Tooling inPlace • Misc. Square & Round Stock onCantilever Racks.

DEMPSTER Trash Compactor w/Roll Off Box • (2) CINCINNATI IndustrialRobotic Welders, Mdl. #T3-776, s/n 4608A42-84-0256 (Asset#5248)Electrically Operated w/Power Supply, Work Fixtures, Miller Dataweld 650Power Supplies w/Wire Feed • Double Dip Paint Tank w/(2) Approx. 14’ x 2’x 4’ Deep Dip Tanks, 500’ of Cable Type Conveyor • TOLEDO Digital FloorScale, 4’ x 5’ Platform • MAGNUS MAGNET JR. Parts Cleaner, Approx. 3’ x 4’x 3’ Deep, Roller Conveyor, Fume Discharge • 30” x 30” x 48” TumblingBarrel, Dust Collector • 24” SYNERGY Power Hydro-Stretch Hi-Lite ShrinkWrapper, 4’ Vertical, 48” x 48” Rotary Table • AMERICAN INTERNATIONALHydraulic Paper Baler, 5’ W x 2’ D x 4’ High Chamber Size, ExcellentCondition • (2) 10,000 Lb. Hydro Scales • 250 HP GARDNER DENVERRotary Screw Air Compressor, Electrosaver, Air Cooled, Air Receiver Tank,

Skid Mounted, Starter & Controls, Application Engineering Corp. Mdl. #5215Air Dryer • Approx. 4’ Gas Fired Brick Lined Slot Furnace, Motor & Blower• SAFETY CLEAN Parts Cleaner • TEPCO “Trion” Welding Fume Hood.

(4) FURNACES1- 12” X 16” X 24” LUCIFER ELECTRIC

BOX FURNACE, MDL. #4055C, s/n1456, 1250 Deg. F, 440 Volt, 13KW.

1- 20” X 20” X 36” K.H. HUPPERT TYPEST ELECTRIC BOX FURNACE, s/n 93,Style #19APCIFTOT, 25 KW, 460 Volt, 3Phase.

1- 12” X 12” X 30” LUCIFER DOUBLECHAMBER ELECTRIC ANNEALINGFURNACE.

1- GAS FIRED SLOT FURNACE.

(28) FORK TRUCKS

MISCELLANEOUS

250 HP GARDNER DENVER ROTARY SCREW AIR COMPRESSOR W/ AIR DRYER

VIEW OF FORK TRUCKS

20” X 20” X 36” K.H. HUPPERT TYPEST ELECTRIC BOX FURNACE

VIEW OF MISCELLANEOUSCOIL CRADLES

DUMP HOPPER

Page 7

MISCELLANEOUS COIL STOCK INVENTORY

RAW MATERIALS & INVENTORYHuge Quantity of Raw Materials & Inventory.

REAL ESTATEReal Estate to be Sold by Private Negotiation.

MISCELLANEOUS FLAT STOCK