auston general catalog - austonpumps.com.au
TRANSCRIPT
Description
Standard material
According to API 610 Eighth Edition, August,1995.
Oilfields and TerminalsCrude oil and oil product pipelineWater pipelinesFluid injectionHigh pressure services
Application:
Multistage heavy duty axially split casing centrifugal pump
Horizontal axially split casing, double volute multistage design. Impellers arranged in opposed groups, KSY is a double suction two stages pump for bigger capacity. KDY is a multistage single suction impeller pump for higher head, first stage double suction impeller design for low NPSH required. Removable wear rings protect the casing and impe l le r. The impe l le rs are s ta t ica l l y and dynamically balanced. The pump comply with the API 610 specification latest edition in all technical details. Special antifriction bearings on both sides or sleeve bearings with ring or forced-feed lubrication (axial bearing as segmental thrust bearing ).
Performance Range
3Capacity: Q up to 6000 m /h up to 26400 gpmHead: H up to 880 m up to 2930 feet
OTemperature: T up to 200 CO up to 380 F
Speed: n 2900/1450/980rpm 3500/1750/1180rpm
1
ASY,ADY
Cooling waterWater supply/distributionFire protectionMetal manufacturing IrrigationGeneral industrial services
Application:
AST
Single stage double suction split case pump
Description
The casing is axially split, which permits removal of the complete rotor without moving either piping or motor. Pumps generating high heads have double volutes to reduce radial forces. Replaceable wear ring protect the casing at the impeller running clearances. Flange drilled to ISO, DIN, BS or ANSI.
The close double suction impeller gives practically zero axial forces. Each impeller is statically and dynamically balanced according to ISO1940.
Vertical or horizontal, soft packing or mechanical seal, grease or oil lubrication bearing on request.
3Capacity: Q up to 20000 m /h up to 88000 gpmHead: H up to 200 m up to 600 feet
OTemperature: T up to 105 C O up to 200 F
Speed: n 2900/1450/980/740/580rpm 3500/1750/1180/890/710 rpm
Casing: Cast iron Impeller: Cast iron Ductile cast iron Bronze Cast steel B rass Stainless steel S tainless s teel
Shaft: C-steel Wear ring: Cast iron Cr-steel B rass
Standard material
Performance Range
2
AD,ADG
Multistage stainless steel centrifugal pump
Application:
Water plant
Pressure boosting
Fire fighting
Sprinkling and irrigation
General industrial services
Mines
Boiler feed
Performance Range
3Capacity: Q up to 800 m /h
up to 3000 gpm Head: H up to 600 m
up to 1800 feet OTemperature: T up to 120 C Oup to 230 F
Speed: n 2900/1450 rpm 3500/1750 rpm
Description
Horizontal multistage between bearing segmental ring, a balance device to compensate for axial thrust, grease lubrication bearing are standard. Mechanical seal or soft packing. D series for liquid
o otemperature lower than 80 , DG series for liquid temperature more than 80 C.C
Standard material Diffuser: Cast iron Cast steel Stainless steel
Shaft: Stainless steel Impeller: Cast iron Bronze Stainless steelWear ring: Cast iron、Bronze or stainless steel
SPA
Single stage end suction centrifugal pump
Application:
Cooling waterWater supply/distributionFire protectionDrainage IrrigationGeneral industrial services
Performance Range
3Capacity: Q up to 900 m /h up to 4000 gpmHead: H up to 140 m up to 460 feet
OTemperature: T up to 105 CO up to 200 F
Speed: n 2900/1450 rpm 3500/1750 rpmMax working pressure: 16BAR (40 bar on request)
Casing: Cast iron I m peller: C a st iro n Ductile cast iron B r onze Cast steel B r a ss Stainless steel S t a inless ste el Shaft: Stainless stee l W e ar rin g: Ca st iro n
Standard material
Description
Pump design according to DIN 24255. The casing is heavy duty design for 16bar operating pressure, suction with inlet vane to reduce the NPSH.
Back pull out design for fast and easy maintenance. Replaceable wear ring to assure optimum efficiency. Removable and adjustable support foot provides added rigidity and easy of maintenance. Stainless steel shaft sleeve prevents damage to the shaft reduces the maintenance cost. Mechanical seal or soft packing on request.
900
4000
3 4
SPAZ AISO
Close coupled end suction centrifugal pump
Application:
Cooling water
Water supply/distribution
Fire protection
DrainageIrrigation
General industrial services
Performance Range
3C a p a c i t y : Q up to 300 m /h
up to 120 0 gpmH e a d : H up to 100 m
up to 330 feet OTemperature: T up to 105 C O up to 200 F
S p e e d : n 2900/1450 rpm 35 00 /17 50 rpm
P o w e r : P u p to 3 7 k w up to 50 HP
Max working pressure: 16BAR (40 bar on request)
Description
Description Pump design according to DIN 24255. The casing is heavy duty design for 16bar operating pressure, suction with inlet vane to reduce the NPSH.
Back pull out design for fast and easy maintenance. Replaceable wear ring to assure optimum efficiency. Mechanical seal according to DIN24960 standard.
Standard TEFC IEC B35 motor driven, single phase up to 2.2kw.
Casing: Cast iron Ductile cast iron Cast steel Stainless steel Shaft: Stainless stee l
Impeller: Cas t iron Bronze Brass
Stainless steel Wear ring: C ast ir o n
Standard material
Standard material
5
Air conditioningHeating and ventilatingRefrigerationFire fightingPlumbingFood and drink processCirculatingWater Pressure BoostingTransferWater treatment and supplyIrrigationDrainageFactory pumpingProcess industryPetroleum productsGeneral industrial
Application:
Bearing: Increase size bearing for long bearing life and smooth runningImpeller: Shrouded impeller design provide high efficiency & low hydraulic thrust. Design: Hydraulic design provide high efficiency, low NPSH & stable characteristics
ISO end suction pump
Discharge Diameter: 32mm to 350mmSuction Diameter: 50-400mmFlange standard: PN16/ANSICapacity range: 5m3/hr~1100m3/hr Head range: 5m~150mMax working pressure: 16BAR (40 bar on request)Max Liquid temperature: 105 degree (150 degree on request)
asing: GG20/GG25/304SS/316SS/316L SS Impeller: CuZn30Sn1/GG20/GG25/304SS/316SS/316L SS Shaft: Stainless steelWear ring: GG20Mechanical seal: SiC-GraphiteBearing size: 6306/6308/6310
Performance Range
6
AVM&AVMK
Vertical multistage stainless steel centrifugal pump
Application:
Cooling water system
Municipal water supply and boosting
Fire protection
Domestic water supply
Irrigation and dewatering
General industrial services
Washing plants
Boiler feed and condensate system
Performance Range
3Capacity: Q up to 240 m /h
up to 970 gpm
Head: H up to 300 m
up to 900 feet OTemperature: T up to 120 C
Oup to 230 F
Speed: n 2900rpm or 3500 rpm
Power: P up to 110 kw
up to 150 HP
Standard material
All the parts contact with liquid made of 304 stainless steel, 316 stainless steel on request. The suction
and discharge head can be made of cast iron on request too.
Description
Close coupled vertical multistage pump with all stainless steel parts which be driven by a standard
TEFC motor, discharge and suction in the same line.
Aluminum casing motor up to 7.5kw, single phase motor up to 2.2kw. Class F and IP55 are standard
supply.
Standard supply for liquid temperature up to 90℃, high temperature pump are available on request.
Mechanical seal is Tungsten Carbide/Graphite.
8
Horizontal multistage stainless steel centrifugal pump
Application:
Cooling water systemAguicultureDomestic water supplyPesticide dosing systemGeneral industrial servicesWashing Environment protection
Performance Range
3Capacity: Q up to 28 m /h up to 123 gpmHead: H up to 60 m up to 197 feet
OTemperature: T up to 120 CO up to 230 F
Speed: n 2900rpm or 3500 rpmPower: P up to 4 kw up to 5.5 HP
Standard material
All the parts contact with liquid made of 304
stainless steel, 316 stainless steel on request.
The suction and discharge head can be made
of cast iron on request too.
Description
Horizontal multistage monobloc design with
stainless steel stamping welding impeller and
diffuser, three different type for choice.
Single phase motor up to 2.2kw. Aluminum
casing motor Class F and IP55 are standard
supply.
Standard supply for liquid temperature up to
90 C, high temperature pump are available on
request.
AHM
AHS
AHM,AHS,AHSI,ACH
7
AHSI
ACH
SM
Stainless steel submersible borehole pump
Application:
Water supply
Irrigation
Mine dewatering
Sprinkling and irrigation
Performance Range
3Capacity: Q up to 180 m /h
up to 793 gpm
Head: H up to 381 m
up to 1250 feetOTemperature: T up to 40 CO up to 80 F
Speed: n 2900rpm
3500rpm
Standard material
All the parts made of stainless steel.
Description
Vertical multistage pump with water-filled or oil-filled NEMA standard rewinding type submersible
motor for 4〞 & 6〞 deep well. Non-return valve with each pump, star-delta motor on request.
Centrifugal/mixed flow design for optimum hydraulic selection.
Dry running protection system on request. Impeller & diffuser made of stamping & welding 304
stainless steel.
AQJ
Submersible borehole pump
Application:
Water supply IrrigationMine dewatering Sprinkling and irrigation
Performance Range
3Capacity: Q up to 1000 m /h up to 5000 gpmHead: H up to 400 m up to 1200 feet
OTemperature: T up to 40 CO up to 80 F
Speed: n 2900/1450rpm 3500/1750rpm
Standard material
Diffuser: Cast iron Stainless steel Plastic Shaft: Stainless steel
Impeller: Cast iron Bronze or stainless steel PlasticWear ring: Cast iron、bronze or stainless steel
Description
Vertical multistage pump with water-filled or oil-filled NEMA standard submersible rewinding motor for 4〞 to 20〞deep well. Non-return valve with each pump, star-delta motor on request. Centrifugal/mixed/axial flow design for optimum hydraulic selection. D ry ru nning p rotection s ystem on request. 4〞p ump m ade of plastic impeller & diffuser with oil-filled motor, 6〞 and above motor are water-filled design. 6〞 to 20〞 casing stainless steel pump are available on request.
109
ASP&ASPC
Non-clogging self priming pump
Application:
Performance Range:
Standard Material:
Description:
Rain water and common sewage
Industrial sewage water
Wine and sugar industry
Sewage water in the city
3Capacity: Q up to 750 m /h
up to 3300 gpm
Head: H u p to 120 m
up to 394 feetOTemperature: T up to 40 CO u p to 80 F
Speed: n 2000rpm
Pump casing is made of cast iron or ductile
cast iron, impeller can be cast iron or stainless
steel.
Back-pull-out construction convenient for
maintenance and trouble shoot ing, Dai ly
maintenance can be performed rapidly by
common head tools, saving time and labor.
Stable performance, reliable operation.
ATP
Vertical turbine pump
Application:
Water supply
Irrigation for deep well
Mine dewatering
Sprinkling and irrigation
Industrial wet-pit sumps
River/sea water circulation
Fire-fighting
Performance Range
3up to 40000 m /hCapacity: Q
up to 176000 gpm
up to 200 mHead: H
up to 600 feet Oup to 40 CTemperature: T Oup to 80 F
2900/1450/980rpmSpeed: n
3500/1750/1180rpm
Standard material
Bowl: Cas t iron
Stainless steel
Shaft: Stainless steel
Impeller: Cas t iron
Bronze or stainless steel
Discharge head: Cast iron or carbon steel
Description
Vertical single stage or multistage pump with
mixed or axial flow impeller design, broad
hydraulic coverage provides best selection to
meet specific operating conditions. Fabricated
or cast iron、 surface or underground discharge
head, shaft and bearing combinations promote
long life with options of open or enclose line
shaft construction. It can be driven by VHS
NEMA Standard motor、 VSS motor or diesel
engine through right angle gear box.
1211
ACP,ACPE,AQW
Submersible sewage pump
Application:
Raw water
Municipal and industrial waste water
Rain water
Sewage works
General industrial services
Construction
Performance Range
3Capacity: Q up to 3000 m /h
up to 15000 gpm
Head: H up to 60 m
up to 180 feetOTemperature: T up to 80 C
O up to 150 F
Speed: n 2900/1450/980rpm
3500/1750/1180rpm
Standard material
Casing: Cast iron
Shaft: Stainless steel
Impeller: Cas t iron
Wear plate: Cast iron
Description
Open s ing le channe l impe l le r w i th a
hardened cutter for the ACP series, impeller
with grinder system for ACPE series, non-
clogging close impeller for AQW series, Free
standing or fixed installing. IP68 motor with
double mechanical seal、overload and leakage
sensor. Open jacket cool ing system for
optimum motor cooling, Cable inlet with strain
relief and anti-kink protection. Auto-coupling
system and automatic type are on request.
Adjustable bottom plate as an anti-blockage
device for the pumping of sewage containing
solid or fibrous matter.
AUPD,AUPG
Single phase canned motor in-line pump
Application:
Performance Range:
Standard Material:
Description:
Cooling water
Circulating water
Hot water
Boosting
3Capacity: Q up to 30m /h
up to 150 gpm
Head: H up to 35 m
up to 45 feetOTemperature: T up to 110 CO up to 220 F
Speed: n 2900rpm
3500rpm
Pump casing can be made of cast iron or brass,
impeller made of plastic.
Canned motor driven design, no leakage, low
noise. Pump can be running at three different speed.
Q:[US.gpm]0 65 130
20
15 30
3Q[m /h]
H[m]
0
ACPE Grinder impeller system
1413
ASS,ASSW
3Capacity: Q u p t o 3 3 m /h up to 145 gpmHead: H u p t o 8 0 m up to 242 feet
OTemperature: T up to 40 CO up to 80 F
Speed: n 2900rpm 3500rpm
Performance Range
ASSW ASS
Structural characteristicsStainless steel pump bodyMechanical seal (Graphite/Ceramic or SiC/Graphite)Stainless shaftStainless steel impellerThermal overload protector for single phaseSS for drainage waterSSW for sewage water
Stainless steel submersible pump
Application:Water supplyDraining water for ordinary placeGarden waterSea water
Fire Fighting System and pump Operation conditions
Medium temperature:
0~+55℃ Max environmental temperature:
+50℃Max.working pressure:
6 barMax.suction head:
9m
Pure wtaer or drinking water bottling
Non-flammable or non-explosive clear water without abrasive or fibre and not aggressive to stainless steel.
Household boosting, garden sprinkler, car washing.
Application
Features Pump casing in stainless steel, the jet using heat-resistant engineering plastics, Low noise standard motor. E lectric p ump w ith h igh l ift, d eep s ucktion s elf-priming time is short, smooth operation, durability and other characteristics. Single phase motor mounted thermal protec tor ( three -phase motor can be based on customer requirements to install thermal protector ).
the impeller and
2-pole induction motorThree phase:380-415V/50Hz,Single phase:220-240/50HzSingle phase with thermal protector from USA(Thermal proector for three phase motor are available on request)Insulation class FProtection Ip55Continuous duty suitableHigh efficiency motor on requestShaft sealing: high quality mechanical sealBearing:NSK
Motor
AWLSelf priming stainless steel jet pump
1615