author: schwobe, david j. - uw-stout
TRANSCRIPT
1
Author: Schwobe, David J.
Title: A Feasibility Study of a Flipped Learning Environment for Industrial
Electrical Apprenticeship at Lakeshore Technical College
The accompanying research report is submitted to the University of Wisconsin-Stout, Graduate School in partial completion of the requirements for the Graduate Degree/ Major: MS Career and Technical Education
Research Advisor: Carol Mooney, PhD
Submission Term/Year: Fall 2013
Number of Pages: 37
Style Manual Used: American Psychological Association, 6th edition
I understand that this research report must be officially approved by the Graduate School and that an electronic copy of the approved version will be made available through the University Library website
I attest that the research report is my original work (that any copyrightable materials have been used with the permission of the original authors), and as such, it is automatically protected by the laws, rules, and regulations of the U.S. Copyright Office.
My research advisor has approved the content and quality of this paper.
STUDENT:
NAME: DATE:
ADVISOR: (Committee Chair if MS Plan A or EdS Thesis or Field Project/Problem):
NAME: DATE:
---------------------------------------------------------------------------------------------------------------------------------
This section for MS Plan A Thesis or EdS Thesis/Field Project papers only
Committee members (other than your advisor who is listed in the section above)
1. CMTE MEMBER’S NAME: DATE: 2. CMTE MEMBER’S NAME: DATE: 3. CMTE MEMBER’S NAME: DATE: ---------------------------------------------------------------------------------------------------------------------------------
This section to be completed by the Graduate School This final research report has been approved by the Graduate School.
Director, Office of Graduate Studies: DATE:
2
Schwobe, David J. A Feasibility Study of a Flipped Learning Environment for Industrial
Electrical Apprenticeship at Lakeshore Technical College
Abstract
With the advancement of educational technologies, there is an increase and need for study in
integrating this technology into the traditional learning environment. One such technology in
the learning environment is the flipped classroom. In a flipped classroom, instructional
technologies are used to capture and present the materials that were traditionally delivered by the
instructor face to face in a virtual or remote manner. Using the flipped classroom allows the use
of the instructors’ time to provide more hands-on laboratory activities and also focus upon the
students that need additional help.
This research investigates whether the students enrolled in the industrial electrical
apprenticeship program at Lakeshore Technical College have the needed hardware and software
applications required to support such a learning environment, the flipped classroom.
The study found that all of the respondents had access to the required equipment and
internet access to implement a flipped learning environment. Further research is needed to
investigate if the needed lab equipment and space is available for implementation of a flipped
classroom approach in the industrial electrical apprenticeship program at Lakeshore Technical
College.
3
Table of Contents
Abstract ............................................................................................................................................2
List of Tables ...................................................................................................................................5
Chapter I: Introduction .....................................................................................................................6
Background ......................................................................................................................... 6
Statement of the Problem .................................................................................................... 8
Definition of Terms........................................................................................................... 10
Chapter II: Review of Literature ....................................................................................................11
Instructional Technologies ................................................................................................ 11
Chapter III: Methodology ..............................................................................................................15
Research Design................................................................................................................ 15
Population and Sample (or Setting and Subjects) ............................................................. 15
Instrumentation ................................................................................................................. 16
Data Collection ................................................................................................................. 17
Data Analysis .................................................................................................................... 18
Summary ........................................................................................................................... 18
Chapter IV: Findings......................................................................................................................19
The Sample (or Subjects) .................................................................................................. 19
Findings............................................................................................................................. 20
Summary of Findings ........................................................................................................ 25
Chapter V: Summary, Conclusions, and Recommendations .........................................................27
Summary ........................................................................................................................... 27
Discussion (of the Findings) ............................................................................................. 27
4
Conclusions ....................................................................................................................................28
Recommendations ............................................................................................................. 28
References ......................................................................................................................................31
Appendix A: Consent Letter ..........................................................................................................35
Appendix B: Survey Instrument - Industrial Electrical Apprenticeship ........................................36
5
List of Tables
Table 1: Survey Response Rate .................................................................................................... 20
Table 2: Access to High Speed Internet at Home ......................................................................... 20
Table 3: Access to High Speed Internet at Work .......................................................................... 21
Table 4: Access to High Speed Internet at School ........................................................................ 21
Table 5: Internet Access to Watch a Lecture Outside of Class ..................................................... 21
Table 6: I Have Access to a Computer Outside of Class .............................................................. 22
Table 7: Would Watch a Recording of a Teacher Lecture to Free Up Class Time for Hands
On/Lab Activity ................................................................................................................ 22
Table 8: Would Like More Class Time to Get Help on Homework ............................................. 23
Table 9: Distracted by Other Students During Class Lectures. .................................................... 23
Table 10: Homework is Difficult .................................................................................................. 24
Table 11: Dread Having to Complete Homework on My Own. ................................................... 24
Table 12: Often Have Questions While Completing Homework that Stops Me From Finishing. 25
Table 13: Did Not Complete Homework Assignments Because I Understand the Examples Given
During the Class Lectures and Did Not Need Additional Practice ................................... 25
6
Chapter I: Introduction
Background
The typical university classroom allocates time and space in a way that is familiar to
everybody: Students gather at the class meetings to hear a lecture from the professor and to take
notes, and then students work on homework, projects, and other activities outside of class. The
traditional classroom is so familiar, in fact, that it can be difficult to conceive of classes being
run any other way—and difficult to think of why anyone would ever want to (Talbert, 2012).
While the traditional teaching method is quite passive there are newer methods that
require the student to be a more active part of the learning process. One newer process is called
flipping the classroom (Pape, Sheehan, & Worrell, 2012). In a flipped classroom, teachers use
technology, such as podcasts or videos, to deliver class lectures or demonstrations. If needed, a
student can replay a teacher’s demonstration or lecture several times until they understand all the
concepts. And if they still need more help, they have classroom time the next day to work one-o-
n-one with the teacher (Pape, Sheehan, & Worrell, 2012). The design is such that when the
student arrives in school, they are ready to apply what was delivered via instructional technology
to laboratory or field study assignments.
The industrial electrical apprenticeship is a structured system of workforce development
training combining on-the-job learning under the supervision of experienced journey workers
and related classroom instruction (State of Wisconsin Department of Workforce Development,
2013). The apprenticeship is a four year program that is quite a structured program. At the
center of the apprenticeship is the student-apprentice. In addition an employer is needed to
sponsor the apprentice and to provide the bulk of training in an on the job setting. The second
requirement is a technical college to provide and deliver the state approved curriculum referred
7
to as the related classroom instruction. The Bureau of Apprenticeship Standards oversees the
whole process. The industrial electrical apprenticeship consists of 8320 hours, 7600 hours are
on-the-job and 720 hours are related instruction received in the classroom (Lakeshore Technical
College, 2013).
Lakeshore Technical College first hired a full time instructor for the industrial electrical
apprenticeship program in 1998. With low enrollment numbers at the beginning of the
industrial electrical apprenticeship program, the instructor was tasked with teaching multiple
groups or years of apprentices simultaneously, sometimes up to four groups. The learning
environment format at Lakeshore Technical College has evolved and is one which the instructor
teaches two groups at the same time, this allows enough students per class to make the program
sustainable. This format provides the apprentices time alone and makes it tough to cover the
entire industrial electrical curriculum required by the state of Wisconsin (Wisconsin Technical
College System, 2013) during the 720 hours of instruction.
The four year industrial electrical apprenticeship curriculum consists of many topics
including: Direct Current, Alternating Current, Motor Controls, Programmable Logic
Controllers, Variable Speed Drives, Solid State Technology, Motors, Transformers, Generators,
National Electrical Code, Print Reading, Green Awareness, and Fluid Power (Wisconsin
Technical College System, 2013).
Using a modified flipped classroom would offer the apprentices activities while the
instructor is working with the other group of apprentices. This would also aid the instructor’s
ability to get through the entire industrial electrical curriculum that is required by the state of
Wisconsin.
8
The Electrical Apprenticeship program has been taught with the traditional teacher
student learning environment without the use of video lectures. It is currently unknown if the
students have the needed technology and internet access to support a flipped learning
environment.
Statement of the Problem
The industrial electrical apprenticeship at Lakeshore Technical College features a
classroom where the instructor has been charged with delivering different levels of curricula to
two groups of apprentices simultaneously. A problem has been noted by previous students and
also through the course instructor feedback that Lakeshore Technical College gathers. The
students have stated that the instructor is often too busy, they want and need more time or more
access with instructor, but are unable to when he is with the other group of apprentices
(Lakeshore Technical College, 2013).
At the time of this study, there were 61 apprentices currently enrolled in the electrical
apprenticeship. There were 19 first year apprentices, 23 second year apprentices, 8 third year
apprentices, and 11 fourth year apprentices.
Specifically, instruction within this learning environment has not been designed to permit
the instructor to be actively engaged with one group of students while the other group
participated in independent learning activities. This reduced the amount of time students were in
direct contact with the instructor which complicated the task of getting all the state required
materials covered in the time allotted.
Decades of research clearly demonstrate that for novices, direct, explicit instruction is
more effective and more efficient than partial guidance (Sweller, Ayres, & Kalyuga, 2011).
Even when student have prior subject knowledge strong guidance is as equally effective as
9
unguided approaches. In addition to unguided knowledge typically being less effective, it can
have negative impacts when the students acquire misconceptions or incomplete information
(Kirchner, Sweller, & Clark, 2006).
There is little research existing regarding the use of flipped instructional design in
apprenticeship education. Further investigation was needed to seek out if the students of the
industrial electrical apprenticeship had the need for a flipped learning environment and had the
necessary technology.
This research focused on defining the requirements of a flipped classroom and if a flipped
classroom was appropriate for use in the IEA at Lakeshore Technical College. The sample
included the apprentices to find out if they had access to the necessary technology required to
implement a flipped learning environment. Requirements of the flipped learning environment
included videos or activities for the apprentices to do while the instructor was with the other
group of apprentices. Lab equipment and activities also need to be developed for the apprentices
to do with the instructor. While some hands-on activities currently existed, the flipped
environment will allow time for expanded lab activities. These activities could have included lab
equipment that was already on campus for other programs. However, this created a greater need
to gain access to the equipment through the coordination with other instructors.
Research Questions
The research project attempted to answer the following questions, within the context of
Lakeshore Technical College’s Industrial Electrical Apprenticeship program:
1. Do students have access to the technology necessary to participate in a Flipped
Classroom?
10
2. Do the students have a need for the types of things that a flipped classroom can
remediate?
Definition of Terms
There were several terms commonly used in this study that need to be defined for a more
complete understanding of this study.
Apprenticeship. A structured system of training designed to prepare individuals for
skilled occupations. It combines on-the-job learning under the supervision of experienced
journey workers with related classroom instruction (State of Wisconsin Department of
Workforce Development, 2013).
Flipped classroom. A model of teaching in which a student’s homework is the
traditional lecture viewed outside of class on a podcast. Then class time is spent on inquiry-
based learning which would include what would traditionally be viewed as a student’s
homework assignment. Synonymous with Reverse Classroom (University of Southern Colorado,
2013).
Industrial electrical apprenticeship curriculum. 12 curriculum modules that have
been approved by the state committee on May, 34th, 2004 as the minimum Paid Related
Instruction. In 2009 they identified critical core competencies that instructors should address and
revised the total hours for related instruction to 720 (Wisconsin Technical College System,
2013).
Podcast. Any series of audio files that can be downloaded from the Internet, often
released on some regular schedule. Podcasts are named after Apple Computer, Inc.'s iPod
portable audio players, though most podcasts are in a format that can be played on virtually any
computer or smart phone (University of Southern Colorado, 2013).
11
Chapter II: Review of Literature
Instructional Technologies
Over the years new technology has increased the number of ways teachers have been
able to deliver information to students. What was once referred to as “correspondence” courses,
where content, literature, and assignments were delivered to students through the postal service,
distance education has continually evolved through the implementation of emerging
communication technologies (Swan, Jackman, & Grubbs, 2005). Benefits such as convenience,
time, efficiency and cost effectiveness make web-based instruction very appealing (Andrews &
Demps, 2003).
Specifically, two of the online learning strategies that have been used were blended
classroom and the flipped classroom (Barseghian, 2013). Both of these formats attempt to
maximize face-to-face time by the following: enabling increased student-to-student and
student-to-teacher interaction. They also offered a more personalized instruction by focusing
on the learning needs of each student.
A blended learning environment was one that used traditional face-to-face methods
supplemented or blended with e-learning methods (Gecer & Dag, 2012). A blended learning
environment could compliment the traditional face to face learning environment. However, it has
been noted that some personal attributes such as time management, forward planning, self-
discipline and determination were needed otherwise challenges would be encountered (Zaeri,
2013).
In the flipped learning model, teachers shifted direct learning out of the large group learning
space and moved it into the individual learning space, with the help of one of several technologies
(Hamdan, Patrick, McKnight, & M., 2013). In a flipped classroom, teachers used technology,
12
such as podcasts or videos, to deliver class lectures or demonstrations (Pape, Sheehan, & Worrell,
2012). The videos or screencasts were available for students to access whenever and wherever it
was convenient; at home, during study hall, on the bus, even in the hospital. They could view the
material as many times as they wanted, enabling them to arrive to class better prepared (Musallam,
2010).
A substantial body of research on student-centered, active learning strategies such as
the flipped approach supports the effectiveness of these approaches in increasing student
learning and achievement (e.g., Prince, 2004; Micheal, 2006). Active learning is associated
with improved student academic performance (Hake, 1998; Knight & Wood, 2005; Michael,
2006; Freeman, 2007; Chaplin, 2009).
An online survey of 450 teachers conducted in 2012 by the Flipped Learning
Network found 66% of the teachers surveyed reported their students’ standardized test scores
increased after flipping their classrooms. In the same survey, 80% of teachers perceived an
improvement in their students’ attitudes towards learning. Nearly nine in ten of the teachers
surveyed reported that their job satisfaction also improved, with 46% reporting significant
improvement. Of the educators surveyed, 100% agreed that after flipping their classrooms,
learning became more active. Over 90% said that positive interactions with their students
increased; students had greater access to course material and instruction, students could work
at their own pace; students were more likely to engage in critical thinking; and instruction
became more differentiated and personalized.
Flipped learning does have its critics. Gary Stager, a noted educator, speaker, and
journalist, is one critic of Flipped Learning. During a radio debate with Aaron Sams on
Southern California Public Radio, Stager said that the need to flip the classroom is
13
symptomatic of a bloated curriculum (Southern California Public Radio, 2013). Stager is
concerned that flipping the classroom is a way to replace teachers with videos. In looking at
the effect of the flipped classroom model on a computer applications course, Johnson and
Renner (2012) found no significant differences between mean test scores of those who
experienced the flipped classroom components and those students who did not. These results
might be explained by the fact that the instructor of this course was asked to implement the
flipped learning instruction method absent any perceived need (Hamdan, Patrick, McKnight,
& M., 2013).
Gojak (2012) noted that it is not whether or not to flip the classroom, instead,
professional educators ought to ask how they can use the affordances of this model to become
more effective as teachers and increase students’ conceptual understanding, as well as
procedural fluency (where necessary).
To implement a flipped learning environment, the educational environment would
need to strengthen the technology infrastructure (Ullman, 2013). Students would need
adquate devices, computer hardware and software, and Internet access. Technique-heavy
workshops would also assist in the transition (Ullman, 2013). The creation of the recorded
videos, necessitate a digital camera, tripod, white panel board, and some dry erase markers.
Recording the material as the instructor goes through the lesson setup on the white boards
would also be necessary (Brunsell & Horejsi, 2013). It is unfair to demand that students
watch the video outside of the class time for various reasons (Miller, 2012). If the students
watch the videos during class time, this would provide the students a productive activity
while the instructor was working with the other group of students.
14
Teachers around the country who’ve flipped, nearly 59% say they’re doing more
labs (Petrinjak, 2012). This would require additional labs along with the equipment and
room to support such a change.
There was additional equipment on Lakeshore Technical College’s campus that
could have been utilized for this purpose, and this would have required proper scheduling
for access to the equipment. Unfortunately this equipment was currently not utilized by the
industrial electrical apprenticeship due to time constraints.
15
Chapter III: Methodology
Research shows benefits to a flipped learning environment (Strayer, 2007). This has led
to the exploration of a flipped learning environment for the industrial electrical apprenticeship
program at Lakeshore Technical College. This research project explored the needs of a flipped
learning environment and the student’s access to the needed technology. Specifically two
questions were addressed:
1. Do students have access to the technology necessary to participate in a Flipped
Classroom?
2. Do the students have a need for the types of things that a flipped classroom can
remediate?
Research Design
A descriptive research study was selected to answer the research questions. Quantitative
methodology was employed. The research collection method was a cross-sectional designed
survey. The survey developed, pilot tested and administered. It provided a snapshot of
information at the point in time the survey was administered. The independent variable was the
flipped learning environment. The dependent variable was the Industrial Electrical
Apprenticeship at Lakeshore Technical College.
Population and Sample (or Setting and Subjects)
The population of this study was all industrial electrical apprentices from Lakeshore
Technical College to probe the technology they have available. They were selected due to the
fact they were currently enrolled in the program of the study. The purpose was to determine if
students had access to the technology necessary to participate in a Flipped Classroom, and if the
students have a need for the types of things that a flipped classroom can remediate?
16
The survey format was a census survey. All students in the industrial electrical
apprenticeship were given the chance to participate in the survey.
At the time of the study there were 61 industrial electrical apprentices at Lakeshore
Technical College. There were 11 fourth year apprentices, 8 third year apprentices, 23 second
year apprentices, and 19 first year apprentices. All the apprentices were employed in an
industrial setting. There were some apprentices with many years of experience in maintenance
and also some apprentices started the apprenticeship with no maintenance experience. The
instructor had access to all of the industrial electrical apprentices at Lakeshore Technical
College.
Instrumentation
A survey questionnaire was developed to answer the research questions. The survey was
limited to 12 questions and used a Likert scale with selections that forced a response. The
questions were extracted from a previous evaluation that was done to assess Niles Township
219’s usage of the Flipped Classroom Model to increase homework completion, improve student
attitudes towards homework, increase differentiation in the classroom (Camel, 2011). The
questions were all multiple choice. The first four questions used a Likert scale with three points
on the scale: Never, Sometimes, and Always. The remaining eight questions also used a Likert
scale with four points on the Likert scale: Strong disagree, Disagree, Agree, and Strongly Agree.
A Likert scale was used because the questions can be analyzed on an individual basis. The
selection of using three and four points upon the scales was to force the respondent to make a
decision.
A pilot study was conducted prior to disseminating the survey. The pilot study resulted in a
limited response from the apprentices. There were sixteen replies to the pilot study. The results
17
of the pilot study identified the following: All students had access to the internet from multiple
locations. There was only one student that does not have access and equipment to watch a
lecture outside of class. There were half of the students that would like more help in class with
the homework. There were two students that are distracted by other students during class time.
There was only one student that dreads having to complete the homework on their own and finds
it difficult to do because of material missed during class time.
The survey was developed using Qualtrics. Qualtrics is an online survey using tool. The
survey was designed with multiple choice questions employing a Likert scale. A cover letter
stating the anonymity of the survey was sent to the students in addition to the link for the online
survey. Qualtrics gathered the data and provides comprehensive data analysis and percentages
upon the data.
Data Collection
One week before launching the actual survey, an e-mail from the researcher was sent out to
the industrial electrical apprenticeship students school e-mail addresses. In addition, work or
personal e-mail addresses that were available were also used. The e-mail stated that the
participation of the survey was optional and the results would be anonymous. The e-mail also
requested the student to watch for the next e-mail which would be sent the following week that
contain a link to complete a survey. There was also a follow up e-mail sent the day after the
survey. Both of these efforts were made to increase the response rates.
One limitation of the survey was the fact that it only surveyed the current students in the
program. This meant that the previous students did not have any input to the study.
18
Data Analysis
The data was collected using Qualtrics, an online survey tool. The Qualtrics system
tracked the results of the survey, and provided a summary of statistics. Statistics included
frequency, percentage/mean and standard deviation and will be presented in Chapter Four.
Summary
A survey was used to collect data from all students currently enrolled in the industrial
electrical apprenticeship program at Lakeshore Technical College. This survey was designed to
find out if the students had the required equipment, access to the internet and some traits that a
flipped learning environment could alleviate. An online survey tool was selected due to its ease
of use and to increases the anonymity of the responses. A pilot study was done to test the
validity of a few of the survey questions. A test of reliability could be done by comparing the
pilot study results to the survey results. The pilot study was conducted during the previous
summer; there were limited response due to the limited access to the students. The survey was
administered during the school year to ensure there was reliable access to all 61 students.
19
Chapter IV: Findings
The purpose of the study was to determine if there was a need and if the students had the
necessary technology to facilitate a flipped learning environment for the industrial electrical
apprenticeship at Lakeshore Technical College.
Specifically two questions were addressed:
1. Do students have access to the technology necessary to participate in a Flipped
Classroom?
2. Do the students have a need for the types of things that a flipped classroom can
remediate?
The Sample (or Subjects)
The population that was survived consisted of 61 students that were enrolled in the
industrial electrical apprenticeship program at Lakeshore Technical College. An online survey
was sent to all of the current students. The survey was designed to find out if the students had
the required equipment, access to the internet and some traits that a flipped learning environment
could alleviate. An online survey tool was selected due to its ease of use and to increases the
anonymity of the responses. A pilot study was done to test the validity of a few of the survey
questions. A test of reliability could be done by comparing the pilot study results to the survey
results. The pilot study was conducted during the previous summer; there were limited response
due to the limited access to the students. The survey was administered during the school year to
ensure there was reliable access to all 61 students. The approximate age range of students was
from mid-twenties through early fifties. There was one female and the remaining sixty students
were males. All students had graduated high school; some had other education in addition to the
current apprenticeship program. There are currently 61 students in the industrial electrical
20
apprenticeship program. Of the students in the program 57 of them replied to the survey which
yielded a response rate of 93.4%. See Table 1.
Table 1
Survey Response Rate
Total Number of Students Total Number of Replies Response Rate
61 57 93.4%
Findings
The first survey question was an attempt to find out if the students had access to high speed
internet (DSL, Cable) at home. Of the respondents there were 47 responses or 82% that selected
always, 7 responses or 12% that selected sometimes and 3 responses or 5% that selected never.
See Table 2.
Table 2
Access to High Speed Internet at Home
Home Never % Sometimes % Always % Mean
Responses 3 5 7 12 47 82 2.77
The second survey question was an attempt to find out if the students had access to high
speed internet (DSL, Cable) at work. Of the respondents there were 28 responses or 49% that
selected always, 20 responses or 35% that selected sometimes and 9 responses or 16% that
selected never. See Table 3.
21
Table 3
Access to High Speed Internet at Work
Work Never % Sometimes % Always % Mean
Responses 9 16 20 35 28 49 2.33
The third survey question was an attempt to find out if the students had access to high
speed internet (DSL, Cable) at school. Of the respondents there were 39 responses or 68% that
selected always, 18 responses or 32% that selected sometimes and none of the respondents
selected never. See Table 4.
Table 4
Access to High Speed Internet at School
School Never % Sometimes % Always % Mean
Responses 0 0 18 32 39 68 2.68
The fourth survey question was an attempt to find out if the students had internet access to
watch a lecture outside of class. Of the respondents there were 31 responses or 55% that selected
always, 23 responses or 41% that selected sometimes and 2 responses or 4% that selected never.
See Table 5.
Table 5
Internet Access to Watch a Lecture Outside of Class
Access Never % Sometimes % Always % Mean
Responses
2 4 23 41 31 55 2.52
22
The fifth survey question was an attempt to find out if the students had access to a
computer outside of class. Of the respondents there were 32 responses or 56% that strongly
agreed, 23 responses or 40% that agreed, 2 responses or 4% that disagreed, and none of the
respondents strongly disagreed. See Table 6.
Table 6
I Have Access to a Computer Outside of Class
Access Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
0 0 2 4 23 40 32 56 3.53
The sixth survey question was an attempt to find out if the students would watch a
recording of the teacher outside of class if it meant freeing up class time for hands on/lab
activity. Of the respondents there were 11 responses or 19% that strongly agreed, 34 responses
or 60% that agreed, 10 responses or 18% that disagreed, and 2 responses or 4% that strongly
disagreed. See Table 7.
Table 7
Would Watch a Recording of a Teacher Lecture To Free Up Class Time for Hands On/Lab
Activity
Recording Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
2 4 10 18 34 60 11 19 2.95
23
The seventh survey question was an attempt to find out if the students would like more
class time to get help on homework. Of the respondents there were 9 responses or 16% that
strongly agreed, 25 responses or 44% that agreed, 20 responses or 35% that disagreed, and 3
responses or 5% that strongly disagreed. See Table 8.
Table 8
Would Like More Class Time to Get Help on Homework
Help Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
3 5 20 35 25 44 9 16 2.70
The eighth survey question was an attempt to find out if the students were distracted by
other students during class lectures. None of the respondents strongly agreed, 7 responses or
12% that agreed, 35 responses or 61% that disagreed, and 15 responses or 26% that strongly
disagreed. See Table 9.
Table 9
Distracted by Other Students During Class Lectures
Distraction Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
15 26 35 61 7 12 0 0 1.86
The ninth survey question was an attempt to find out if the students found the homework
difficult to do because they often missed material during a class lecture. None of the respondents
24
strongly agreed, 10 responses or 18% that agreed, 40 responses or 70% that disagreed, and 7
responses or 12% that strongly disagreed. See Table 10.
Table 10
Homework is Difficult
Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
7 12 40 70 10 18 0 0 2.05
The tenth survey question was an attempt to find out if the students dreaded completing the
homework on their own. There was 1 response or 2% that strongly agreed, 14 responses or 25%
that agreed, 35 responses or 61% that disagreed, and 7 responses or 12% that strongly disagreed.
See Table 11.
Table 11
Dread Having to Complete Homework on My Own
Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
7 12 35 61 14 25 1 2 2.16
The eleventh survey question was an attempt to find out if the students often had questions
while completing the homework that prevented them from finishing assignments. Of the
respondents there was 1 response or 2% that strongly agreed, 16 responses or 29% that agreed,
34 responses or 61% that disagreed, and 5 responses or 9% that strongly disagreed. See Table
12.
25
Table 12
Often Have Questions While Completing Homework that Stops Me from Finishing
Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
5 9 34 61 16 29 1 2 2.23
The twelfth survey question was an attempt to find out if the students did not complete
homework assignments because they understood the examples given during the lecture and did
not need additional practice. None of the respondents strongly agreed, 8 responses or 14% that
agreed, 40 responses or 70% that disagreed, and 9 responses or 16% that strongly disagreed. See
Table 13.
Table 13
Did Not Complete Homework Assignments Because I Understand the Examples Given During
the Class Lectures and Did Not Need Additional Practice
Strongly
Disagree
% Disagree % Agree % Strongly
Agree
% Mean
Responses
9 16 40 70 8 14 0 0 1.98
Summary of Findings
The study found that all students had access to high speed internet (DSL, Cable) from at
least one location. Most students had high speed internet access from multiple locations. There
were only two students that did not have access to a computer outside of class.
26
The study showed that most of the students, 79% would watch a recording of the teacher IF
it meant freeing up class time for hands on/lab activity. This could mean that they desired more
hands on/lab activities during class time.
The study showed that 60% of the students would like to get more help during class time.
Some of the 60% could be due to the 12% that were distracted by other students in class. It was
not good to find that there were 27% of students that dreaded doing their homework, nor was it
good to see that 31% had questions that prevented the completion of their homework. There
were only 14% that felt they understood the examples given during the class lecture and did not
need additional practice. This would leave the remaining 86% admitted to needing additional
practice beyond the class lecture.
27
Chapter V: Summary, Conclusions, and Recommendations
Summary
The purpose for this survey was an attempt to improve the current learning environment of
the industrial electrical apprenticeship program at Lakeshore Technical College. More
specifically, the study examined the feasibility of flipping the classroom.
This study surveyed the 61 current industrial electrical apprentices to see if there were
needs that a flipped learning environment could remedy and if the students had access to the
technology that is required in such an environment.
The instrument for this study was an online survey and consisted of 12 multiple choice
questions.
Discussion (of the Findings)
The study found that all students had access to high speed internet (DSL, Cable) from at
least one location. Most students had high speed internet access from multiple locations. There
were only two students that did not have access to a computer outside of class.
The study showed that most of the students, 79% would watch a recording of the teacher IF
it meant freeing up class time for hands on/lab activity. This could mean that they desired more
hands on/lab activities during class time.
The study showed that 60% of the students would like to get more help during class time.
Some of the 60% could be due to the 12% that were distracted by other students in class. It was
not good to find that there were 27% of students that dreaded doing their homework, nor was it
good to see that 31% had questions that prevented the completion of their homework. There
were only 14% that felt they understood the examples given during the class lecture and did not
28
need additional practice. This would leave the remaining 86% admitted to needing additional
practice beyond the class lecture.
Survey questions inquired about the student’s access to the internet and technology that
would support a flipped learning environment. The data shows that all students have the needed
access and technology required of a flipped classroom at home, school and at work.
The remaining eight questions inquired about various areas that a flipped learning
environment can improve. The data shows that 79% agree upon watching a recorded lecture
outside of class IF it means freeing up class time for hands on/lab activity. Sixty percent would
like more class time to get help on homework. Twelve percent agreed to being distracted during
the lectures by other students. The data shows that 27% of the students dread to do homework
and 31% have questions that prevent them from finishing assignments.
Conclusions
Based on the research findings the following conclusions were drawn:
• All students have the necessary technology and access to facilitate a flipped
learning environment.
• Most of the students, 79%, would watch a recorded lecture outside of class IF it
meant freeing up class time for hands on/lab activities.
• Most of the students, 60%, would like additional help in class with homework.
• Twenty-seven percent (27%) of the students dread completing homework on their
own and 31% have questions preventing them from completing homework.
Recommendations
Based upon the research finding and conclusions, the following recommendations are
being proposed:
29
• Explore the use of the current technology the students have access to by offering
additional resources online.
• Take more time in class to ensure the students are comfortable with the assigned
homework.
• With 27% of the students dreading homework and 31% having questions preventing
them from completing homework there is an immediate need for improvement.
• Further research is needed to investigate if the needed lab equipment and space is
available at Lakeshore Technical College
It is recommended to ensure the students are aware of additional online resources and
demonstrate how to access them in class. There should also be more time spent upon additional
practice problems with the whole class and clarify the assigned homework with the whole class.
This should reduce the number of students that are unable to complete their homework and
should also reduce any anxiety related to homework.
Additionally, recordings of the current power point presentations should be created and
made available to the students. This would immediately free up time for the instructor to spend
more time with the students to work through additional practice problems and hands on/lab
activities.
Since the industrial electrical apprenticeship program has increased the program hours to
720 there has been a noticeable increase in the amount of time available for hands on activities.
This potential needs to maximized with the creation of even more hands on/lab activities.
However, the creation of additional hands on/lab activities would require adequate lab space.
With the recent acquisition of programmable logic controllers for the industrial electrical
apprenticeship program there is also a need for an additional lab space to set them up. Further
30
research is required to find out if there is the additional lab equipment and required space for this
growth.
31
References
Andrews, K., & Demps, E. (2003). Distance education in the U.S. and Canadian undergraduate
dental curriculum. Journal of Dental Education, 427-438.
Barseghian, T. (2013). Three trends that define the future of teaching and kearning. Retrieved
from http://blogs.kqed.org/mindshift/2011/02/three-trends-that-define-the-future-of-
teaching-and-learning/
Brunsell, E., & Horejsi, M. (2013). Flipping your classroom in one "take". Science Teacher, 8.
Camel, C. (2011). An evaluation of the flipped classroom. Boise, ID: Boise State University.
Chaplin, S. (2009). Assessment of the impact of case studies on student learning gains an
introductory biology course. College Science Teaching, 72-79.
Freeman, S., O'Connor, E., Parks, J., Cunningham, M., Hurley, D., Haak, D., . . . Wenderoth, M.
(2007). Prescribed active learning increases performance in introductory biology. CBE
Life Science Education, 132-139.
Gecer, A., & Dag, F. (2012). A blended learning experience. Educational Sciences: Theory &
Practice, 438-442.
Gojak, L. (2012). To flip or not to flip: That is not the question! Retrieved from
http://www.nctm.org/about/content.aspx?id=34585
Hake, R. (1998). Interactive-engagement versus traditional methods: A six-thousand student
survey of mechanics test data for introductory physics courses. American Journal of
Physics, 64-74.
Hamdan, N., Patrick, M., McKnight, K., & M., A. K. (2013, June 13). A review of flipped
learning. Retrieved from
32
http://flippedlearning.org/cms/lib07/VA01923112/Centricity/Domain/41/LitReview_Flip
pedLearning.pdf
Kirchner, P., Sweller, J., & Clark, R. E. (2006). Why minimal guidance during instruction does
not work: An analysis of the failure of constructivist, discovery, problem-based
experiential, and inquiry-based teaching. Educational Psychologist, 75-86.
Knight, J., & Wood, W. (2005). Teaching more by lecturing less. Cell Biology Education, 298-
310.
Lakeshore Technical College. (2013). Course instructor feedback. Cleveland, OH: Lakeshore
Technical College.
Lakeshore Technical College. (2013). Industrial electrician apprenticeship. Retrieved from
http://gotoltc.edu/apprenticeship/industrialElectrician.php
Micheal, J. (2006). Where's the evidence that active learning works? Advances Physiology
Education, 159-167.
Miller, A. (2012, Febuary 24). Five best practices for the flipped classroom. Retrieved from
http://ticharter33.org/library/TIarticle36.pdf
Musallam, R. (2010). The effects of screencasting as a multimedia pre-training tool to manage
the intrinsic load. San Francisco, CA: University of San Francisco.
Pape, L., Sheehan, T., & Worrell, C. (2012, March). How to do more with less lessons from
online learning. Learning & Leading with Technology, 18-22.
Petrinjak, L. (2012, March). Have you flipped? Retrieved from
http://www.nsta.org/publications/news/story.aspx?id=59253
Prince, M. (2004). Does active learning work? Journal of Engineering Education, 223-231.
33
Southern California Public Radio. (2013). Can flipping the classroom fix the educational system?
Retrieved from http://www.scpr.org/programs/ airtalk/2013/02/20/30599/can-flipping-
the-classroom-fix-the-educational-sys/
State of Wisconsin Department of Workforce Development. (2013). Apprenticeship standards.
Retrieved from http://dwd.wisconsin.gov/apprenticeship/default.htm
Strayer, J. F. (2007). The effects of the classroom flip on the learning environment: A
comparison of learning activity in a traditional classroom and a flip classroom that used
an intellegent tutoring system. Columbus, OH: Ohio State University.
Swan, M., Jackman, D., & Grubbs, J. (2005). Educational opportunities for agricultural distance
programs. Journal of Agricultural Education, 49-59.
Sweller, J., Ayres, P., & Kalyuga, S. (2011). Cognitive load theory. New York, NY: Springer.
Talbert, R. (2012). Inverted classroom. Retrieved from
http://scholarworks.gvsu.edu/do/search/?q=author_lname%3A%22Talbert%22%20author
_fname%3A%22Robert%22&start=0&context=455552
Ullman, E. (2013). Tips to help you flip your classroom. Education Update, 1-5.
University of Southern Colorado. (2013). Frequesntly asked questions: Definition of terms.
Retrieved from http://www.flippedclassroom.com/help/definitions.php
Wilson II, J. S., Parr, B. A., & Parr, K. S. (2012). Student perceptions of distance education in a
career and technical teacher education program. Career and Technical Education
Research, 157-169.
Wisconsin Technical College System. (2013). 50-413-1 Industrial electrician apprenticeship.
Retrieved from
34
http://www.curriculumbank.org/curriculumbank/index.pl?id=2416&isa=Category&op=sh
ow
Zaeri, N. (2013). Blended learning system performance evaluation. International Journal of
Computer Applications, 33-39.
35
Appendix A: Consent Letter
Dear apprentices,
As a student enrolled in the Electrical Apprenticeship at Lakeshore Technical College
you are being asked to provide input to the program and how it is currently administered. As
you are aware two groups of apprentices are being taught simultaneously, splitting the instructor
between the two groups. This may not be or seem like the optimum format for training.
In an attempt to improve the electrical apprenticeship and the education you receive, I am
asking for your input. Please take a few minutes to fill out the following survey. Be assured,
your responses are anonymous. Please let me know if you have questions or concerns.
Sincerely,
David Schwobe
36
Appendix B: Survey Instrument - Industrial Electrical Apprenticeship
1. I have access to high speed internet (DSL, Cable) at home.
( ) Never ( ) Sometimes ( ) Always
2. I have access to high speed internet (DSL, Cable) at work.
( ) Never ( ) Sometimes ( ) Always
3. I have access to high speed internet (DSL, Cable) at school.
( ) Never ( ) Sometimes ( ) Always
4. I have internet access to watch a lecture outside of class.
( ) Never ( ) Sometimes ( ) Always
5. I have access to a computer outside of class.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree
6. I would watch a recording of my teacher lecturing outside of class IF it meant freeing up class
time for hands on/lab activity.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree
7. I would like more class time to get help on homework.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree
37
8. During class lectures, I am distracted by other students in the class.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree
9. Homework is difficult to do because I often miss material during class lecture.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree
10. I dread having to complete homework on my own.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree
11. I often have questions while completing homework that stops me from finishing
assignments.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree
12. I did not complete homework assignments because I understood the examples given during
the class lecture and did not need additional practice.
( ) Strongly disagree ( ) Disagree ( ) Agree ( ) Strongly Agree