autodome® 500i series intelligent ptz camera …...2 | autodome® 500i series intelligent ptz...
TRANSCRIPT
CCTV | AutoDome® 500i Series Intelligent PTZ Camera System
Bosch’s AutoDome modular camera system is arevolutionary new concept in dome cameras. More than justa series of cameras, it’s a dome platform built around asystem of intelligent, interchangeable modules that allowyou to update camera functionality quickly and cost-effectively. Using common components lets you install abasic camera system today and migrate to a more advancedversion tomorrow – without having to replace the entiredome, thus protecting your initial investment.
Interchangeable modulesThe entire AutoDome system is based on fiveinterchangeable modules: the CPU, camera, housing,communications, and power supply. Simply swap one ofAutoDome’s interchangeable modules and quickly upgradefrom analog to IP, color to day/night, or add motiondetection, image stabilization, and AutoTrack. Never beforehave you had the ability to adapt a security system to yourchanging needs this quickly or inexpensively.
By using the same housing components, all installationshave a consistent look, and observers have no idea whichtype of camera (if any) is watching over them. This unique,modular design also gives you the flexibility to movecameras between different housings when special coverageis needed, or as site plan requirements change. Forexample, an 18x PTZ camera over a specific area couldeasily be “hot-swapped” to a 26x or 36x day/night without
removing the power. AutoDome’s Ethernet communicationsmodule allows you to add IP functionality while maintainingconnectivity to existing analog inputs and outputs.
500i Series highlightsAutoDome 500i Series adds real intelligence to your videosurveillance applications. Equipped with AutoTrack II thelatest version of Bosch’s award-winning motion trackingsoftware, built-in image stabilization, motion detection, anda sophisticated alarm handling “rules” engine, theAutoDome 500i Series incorporates advanced, intelligentvideo features unmatched by any other camera system.
The AutoDome 500i Series supports a variety of standardand optional video and data transmission methods,including Bilinx (over coax and UTP), fiber, and even TCP/IP over Ethernet. Remote control, configuration, andfirmware updates can also be performed over these cables,offering you unparalleled control of your cameras. Cablecompensation provides extended coaxial and UTP distanceruns while preventing the image quality degradation causedby signal losses from long cable lengths.
The optional IP Communications Module has hybridfunctionality to protect your current analog technologyinvestment while providing a clear and stable migrationpath to fully digital, IP-based solutions. This allows you tomove to IP video at your own pace – all at once or onecamera at a time. And since all AutoDome modules are
AutoDome® 500i Series Intelligent PTZCamera System
▶ Fully interchangeable CPUs, cameras, housings,communications, and mounts
▶ Choice of 540 TVL 36x day/night night camera with128x wide dynamic range or 26x and 18x day/nightcameras
▶ AutoTrack II automated motion tracking
▶ Video motion detection
▶ Optional IP (MPEG-4) connectivity
▶ Advanced privacy masking
▶ Advanced alarm control with rules engine
▶ UTP transmission standard on all analog models
▶ Cable compensation extends cabling distances
www.boschsecurity.com
2 | AutoDome® 500i Series Intelligent PTZ Camera System
completely interchangeable, there is no need to replaceexpensive components (e.g., cameras) or labor-intensivecomponents (e.g., mounts and housings).
Functions
The following are some of the features that make theAutoDome 500i Series the most flexible PTZ dome camerasystems in the security industry.
High-performance PTZ day/night camerasImage control and quality are integral aspects of any PTZdome system, and the AutoDome delivers. The 500i Seriesis available with a choice of 18x, 26x, and the industry-leading 36x optical zoom lens, and all 500i Series systemsoffer a full 12x digital zoom. The 18x and 26x camerasprovide 470 TVL (NTSC/PAL), and the 36x camera providesa full 540 TVL of horizontal resolution for outstanding clarityand image detail. The 36x camera also incorporatestechnology that dramatically improves the dynamic rangeby 128 times. Also known as WDR (wide-dynamic range), itresults in clear image reproduction in extreme high-contrastenvironments.
The patented AutoScaling (proportional zoom) andAutoPivot (automatically rotates and flips the camera)ensure optimal control.
Day/night capabilities and outstanding sensitivity make500i Series cameras exceptional performers in all lightingconditions. In low light, these cameras automatically switchfrom color to monochrome by removing the IR filter to boostthe infrared illumination sensitivity, while maintainingsuperior image quality. For operation in the darkestconditions, the SensUp control feature automaticallyreduces the shutter speed to as little as one second. Thisincreases sensitivity by more than 50 times.
With super-quick, 360° per-second pan and tilt speeds, theAutoDome 500i Series outperforms other domes in itsclass. The 500i Series supports 99 pre-positions and twostyles of Guard Tours: Preset and Record/Playback. Thepreset tour has capability for up to 99 pre-positions with aconfigurable dwell time between pre-positions, and can becustomized as to the order and frequency each preset isvisited. AutoDome 500i Series also provides support for tworecorded tours, which have a combined duration of 15minutes of movements. These are recorded macros of anoperator’s movements, including pan, tilt, and zoomactivities, and can be played back in a continuous manner.
Supported menu languages include: English, French,German, Spanish, Portuguese, Italian, Dutch, and Polish.
AutoTrack IIBosch introduced the industry’s first automated motiontracking system, and now we’ve made this award-winningtechnology even better. The AutoDome 500i Series containsan advanced DSP that provides real-time video processingfor incredibly smooth object tracking.
AutoTrack II utilizes Bosch’s unique “virtual masking”technology. These “invisible” masks are created to act justlike privacy masks, except that only the AutoTrack can seethem – and it knows to ignore any motion behind them. Thisenables the AutoTrack to ignore extraneous backgroundmotion, such as a tree blowing in the wind, making it idealfor both indoor and outdoor applications.
Video motion detection (VMD)With AutoDome, you can create a “region of interest” withina preset position where motion is to be detected. TheAutoDome 500i Series supports a total of 10 individualregions of interest (one per pre-position). VMD also takesadvantage of virtual masking to ignore areas of unwantedmotion.
Image StabilizationAs PTZ cameras continue to improve their optical zoomcapabilities, image stabilization becomes critical toeliminate movement caused by unstable camera mounts. Amere quarter-inch of movement of the camera mount canshift the field of view by more than 20 feet when the camerais zoomed to a high value. This can render images unusable.
Image stabilization algorithms included with the AutoDome500i Series reduces camera shake in both the vertical andhorizontal axis, resulting in exceptional image clarity (pixeldisplacement up to +/- 10% for frequencies up to 10 Hz).Bosch’s unique image stabilization solution does notreduce camera sensitivity, unlike competitive systems.
Alarm managementThe AutoDome 500i Series takes alarm handling to newlevels of flexibility and power.
Inputs and outputsThe AutoDome 500i Series can handle seven alarm inputs,two of which are analog inputs that can be programmed forEOLR (End-of-Line Resistor) supervision whenever truesecurity applications require it. These inputs enable thedome to “sense” if the contact is opened or closed andwhether the wire has been tampered with (either by beingcut or shorted). In addition, the AutoDome 500i Seriessupports four outputs: one relay rated at two amps andthree additional open collectors for driving externaldevices. Each can be programmed individually.
AutoDome® 500i Series Intelligent PTZ Camera System | 3
Advanced alarm controlThis new concept in flexibility goes beyond simple alarmhandling. Advanced alarm control uses sophisticated rules-based logic to determine how to manage alarms. In its mostbasic form, a “rule” could define which input(s) shouldactivate which output(s). In a more complex form, inputsand outputs can be combined with pre-defined or user-specified keyboard commands to perform advanced domefunctions. There is virtually no limit to the number ofcombinations that you can program, making the standardsoftware in the dome ready for any application.
Superior privacy maskingThe AutoDome 500i Series allows for a total of 24 individualprivacy masks, with up to eight displayed in the same scene.Unlike conventional privacy masks, these can each beprogrammed with three, four, or even five corners to covermore complex shapes. Each mask changes size and shapesmoothly and quickly – ensuring that the covered objectcannot be seen. You also have a choice of colors: black,white, and blurred. Blurred comes in handy when privacy isan issue, but determining the presence of motion is stillrequired.
Optional hybrid analog/IP operationOptional hybrid connectivity allows the AutoDome tosimultaneously stream IP video across a local or wide areanetwork, and CVBS video via coaxial cabling to supportexisting analog equipment. Network video streams are sentover IP networks and can be viewed with the Bosch DiBosDigital Video Recorder or on a PC running VIDOS videomanagement software. Alternatively, a Bosch IP videodecoder can be used to display the video on an analog CVBSor VGA monitor. For maximum accessibility, video can beviewed using a Web browser. The BNC connection providesdirect input to a conventional analog matrix switcher orDVR, further enhancing AutoDome’s viewing and recordingflexibility. Hybrid operation allows simultaneous domecontrol over the network and via biphase analog controllers.
MPEG-4 encodingAutoDome’s IP Communications Module uses the latestMPEG-4 compression technology to provide DVD-quality4CIF video at frame rates up to 25/30 PAL/NTSC images persecond (IPS). The IP module also leverages bandwidththrottling and multicasting capabilities to efficientlymanage bandwidth and storage requirements whiledelivering the best possible image quality and resolution.
Tri-streaming videoBosch’s innovative tri-streaming feature enablesAutoDomes equipped with the optional IP CommunicationsModule to generate two independent MPEG-4 streams anda JPEG stream simultaneously. This feature allows you tostream high-quality images for live viewing while recordingat a reduced frame rate, and at the same time, stream JPEGimages to a remote PDA device.
Unsurpassed reliabilityAutoDome builds on Bosch’s 10-plus years of experiencedesigning and manufacturing dome camera systems. AllAutoDome pendant housings (indoor and outdoor) arerated to provide IP 66 protection. Outdoor EnviroDomehousings provide an operating temperature range down to–40° C (–40° F). The optional “XT”extended temperature kitallows AutoDome to operate in temperatures down to –60° C, (–76° F) ensuring reliable operation in even theharshest environments.
All housings come standard with a rugged polycarbonatebubble, recessed set screws, and a recessed bubble latchto reduce the chance of damage from vandalism. Inside thedome, the power, data, and video are all protected againstunexpected surges of power.
Ease of installation and servicingBosch’s innovative software, the Configuration Tool forImaging Devices (CTFID), allows operators or techniciansto control the PTZ, change camera settings, and evenupdate firmware from virtually anywhere without need foradditional wiring. For the new Ethernet versions, anembedded Web server lets the installer access all the usersettings, make camera adjustments, and update firmwarevia a standard Web browser.
AutoDome’s innovative design simplifies installation andservicing. AutoDome reduces maintenance costs becauseyou can replace individual modules instead of entire cameraassemblies. Simply pop out the old module and slide in thenew: it’s almost as easy as changing a light bulb. All tethershave been replaced with hinges, making installation andservicing safer and easier. You can even access the built-inpower supply without taking down the dome.
The AutoDome 500i Series has advanced, built-indiagnostics to simplify service and minimize downtime.Using the On Screen Display (OSD), a technician canquickly and easily check critical parameters (such asinternal temperature and input voltage level) to verify thatthe dome is functioning within acceptable operating limits.If video is not present, a local inspection of three diagnosticLEDs at the camera site can identify the presence of videoand control data.
Feature Comparison MatrixThe following table provides an overview of the AutoDomecamera family and its available features:
www.boschsecurity.com
4 | AutoDome® 500i Series Intelligent PTZ Camera System
Preset Shots 64 99 99
High Speed PTZ
Interchangeable Modules
Day/Night Operation
High Resolution Camera
Alarm Inputs 7/4 7/4
Guard Tour
SensUp Extended Sensitivity
IR Sensitive
Cable Compensation
Bilinx Remote Configuration*
Hybrid Analog/IP Connectivity
UTP/Coax Transmission
Ruggedized, Vandal-Resistant Enclosure
Hot-Swap Camera Modules
Image Stabilization
Video Motion Detection
AutoTrack II Motion Tracking
Advanced Features
Advanced Alarm Control
Privacy Masking and Sector Blanking
AutoDome100 Series
AutoDome200 Series
AutoDome300 Series
AutoDome500i Series
Standard Features
Preset Tour
*Compatible over Coax and UTP transmission only. Remote configuration
over IP via web interface.
Certifications and Approvals
Electromagnetic Com-patibility (EMC)
Complies with FCC Part 15, ICES-003, and CEregulations, including EN50130-4 andEN50121-4
Product Safety Complies with CE regulations, UL, CSA, EN, andIEC Standards
Patents D424,087, 7,111,998, 7,217,045, 7,306,383,D561,808
Installation/Configuration Notes
2
2 E
P
C
1
E
S
P
R
C
M
W
VG4 - - 5
C
T
0
1
F
2
3
E
1
2
3
6
7
8 4
5
4
Ordering Information
1 Video Format 6 Power
1 PTZ PAL 0 24 VAC1
2 PTZ NTSC 1 120 VAC
2 Camera Type 2 230 VAC
2 18x Day/Night PTZ 7 Mount
3 26x Day/Night PTZ W Wall
4 36x Day/Night PTZ M Mast
3 Enclosure C Corner
C In-ceiling2 R Roof4
P Indoor Pendant P Pipe
E Outdoor Pendant _ No Mount2
4 Bubble 8 Fiber Optics
C Clear Rugged _ No Fiber
T Tinted Rugged F Fiber3
5 Communications
S Standard (Coax/UTP)
E Ethernet (TCP/IP)
1 No transformer included. Customer must supply an approved 24 VAC
limited power supply (VG4-A-PSUx or equivalent).
2 Recessed in-ceiling housing units do not require kit options for reference
numbers 6, 7, or 8.
3 Fiber optic option is multi-mode with biphase. Requires LTC 4629 at the
system.
4 Roof mount mounts to vertical Parapet. For flat roof installation, order
an additional LTC 9230/01 Flat Roof Adapter Plate.
Technical Specifications
Camera 36x Day/Night
Imager 1/4 in. Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
Lens 36x Zoom (3.4 –122.4 mm)F1.6 to F4.5
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 1.7° to 57.8°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit)
Synchronization Line-Lock (–120° to 120° vertical phase ad-just) or internal crystal
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Horizontal Resolution 540 TVL (NTSC, PAL) typical
Sensitivity (typical) 5 30 IRE 50 IRE
Day Mode
SensUp Off 0.66 lx 1.4 lx
AutoDome® 500i Series Intelligent PTZ Camera System | 5
SensUp On (1/4) 0.033 lx 0.083 lx
Night Mode
SensUp Off 0.166 lx 0.33 lx
SensUp On (1/4) 0.0065 lx 0.0164 lx
SNR >50 dB
White Balance 2000 K to 10,000 K
5 F1.6, 1/60 (1/50) shutter, max AGC.
Camera 26x Day/Night
Imager 1/4 in. Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
Lens 26x Zoom (3.5 –91.0 mm)F1.6 to F3.8
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 2.3° to 55°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit)
Synchronization Line-Lock (–120° to 120° vertical phase ad-just) or internal crystal
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Horizontal Resolution 470 TVL (NTSC, PAL) typical
Sensitivity (typical) 6 30 IRE 50 IRE
Day Mode
SensUp Off 0.5 lx 1.0 lx
SensUp On 0.0052 lx .013 lx
Night Mode
SensUp Off 0.10 lx 0.26 lx
SensUp On 0.0013 lx 0.0026 lx
SNR >50 dB
White Balance 2000 K to 10,000 K
6 F1.6, 1/60 (1/50) shutter, max AGC.
18x Day/Night
Imager 1/4 in. Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
Lens 18x Zoom (4.1 –73.8 mm)F1.4 to F3.0
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 2.7° to 48°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit)
Synchronization Line-Lock (–120° to 120° vertical phase ad-just) or internal crystal
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Horizontal Resolution 470 TVL (NTSC, PAL) typical
Sensitivity (typical)7 30 IRE 50 IRE
Day Mode
SensUp Off 0.4 lx 0.7 lx
SensUp On 0.0041 lx 0.0082 lx
Night Mode
SensUp Off 0.05 lx 0.17 lx
SensUp On 0.0007 lx 0.0013 lx
SNR >50 dB
White Balance 2000 K to 10,000 K
7 F1.4, 1/60 (1/50) shutter, max AGC.
Mechanical/Electrical
Model In-Ceiling IndoorPendant
EnviroDome®
Weight 2.66 kg(5.86 lb)
2.88 kg(6.3 lb)
3.32 kg(7.3 lb)
Pan Range 360° cont. 360° cont. 360° cont.
Tilt Angle 1° above horizon 18° above horizon 18° above hori-zon
Variable Speed 0.1°/s-120°/s 0.1°/s-120°/s 0.1°/s-120°/s
Pre-positionSpeed
Pan: 360°/sTilt: 210°/s
Pan: 360°/sTilt: 210°/s
Pan: 360°/sTilt: 210°/s
Preset Accuracy
± 0.1° typ. ± 0.1° typ. ± 0.1° typ.
Power 21-30 VAC50/60 Hz
21-30 VAC50/60 Hz
21-30 VAC50/60 Hz
Power Draw: (typ)
Analog Models
15 W 15 W 51 W8
EthernetModels
19 W 19 W 55 W8
8 Add 16 W if using VG4-SHTR-XT kit.
Surge Suppression
Protection on Video Peak current 10 kA (Gas Tube Arrester), peak power1000 W (10/1000 μ)
Protection on RS-232/485, Biphase
Peak current 10 A, peak power 300 W (8/20 μ)
Protection on AlarmInputs
Peak current 17 A, peak power 300 W (8/20 μ)
Protection on AlarmOutputs
Peak current 2 A, peak power 300 W (8/20 μ)
Protection on RelayOutputs
Peak current 7.3 A, peak power 600 W (10/1000 μ)
www.boschsecurity.com
6 | AutoDome® 500i Series Intelligent PTZ Camera System
Protection on PowerInput (Dome)
Peak current 7.3 A, peak power 600 W (10/1000 μ)
Protection on Pow-er Output (Arm Pow-er Supply)
Peak current 21.4 A, peak power 1500 W(10/1000 μ)
Environmental
Model In-Ceiling IndoorPendant
EnviroDome®
OperatingTemp.
-10°C to 40°C(14°F to 104°F)
-10°C to 40°C(14°F to 104°F)
–40°C to 50°C(–40°F to 122°F)
StorageTemp.
–40°C to 60°C(–40°F to 140°F)
–40°C to 60°C(–40°F to 140°F)
–40°C to 60°C(–40°F to 140°F)
Humidity 0% to 90% rela-tive, non-condens-ing
0% to 90% rela-tive, non-condens-ing
0% to 100% relative,condensing
Protection IP 66, IK 8 (62262)
Miscellaneous
Sectors/Titling 16 independent sectors with 16-character titles/sector
Camera Setup/Control
Biphase, RS-232, RS-485, Bilinx9 (coax)
CommunicationsProtocols
Biphase, Bilinx8, Pelco P, and Pelco D
Pre-positions 99, each with 16-character titles
Guard Tours Two (2) types of tours:• Recorded tours - two (2), total duration 15 mi-
nutes• Preset tour - one (1), consisting of up to 99
scenes, consecutively and (1) customized up to99 scenes
Supported Lan-guages
English, French, German, Spanish, Portuguese, Polish,Italian, and Dutch
9 Bilinx not available on Ethernet models.
Cable Compensation
Max Distance With Pre-comp OFF With Pre-comp ON
RG-59/U 1000 ft (300 m) 2000 ft (600 m)
RG-6/U 1500 ft (450 m) 3000 ft (900 m)
RG-11/U 2000 ft (600 m) 4000 ft (1200 m)
Cat 5/UTP (Passive receiver)
750 ft (225 m) 1500 ft (450 m)
User Connections
Power (Camera) 21-30 VAC, 5/60 Hz
Power (Heater) 21-30 VAC, 50/60 Hz
Biphase ± Control Data
Audio Line In10 9 K Ohm typ, 5.5 Vp-p max
RS-232 RX/TX or RS-485 ± - optional control data(dip switch selectable)
Video BNC/UTP11
EOLR Alarm Inputs (2) Programmable for“normally open”, "normally closed", “normallyopen-supervised”, “normally closed-super-vised”
Alarm Inputs (5) Programmable for“normally open” or "normally closed"
Relay Out (1) Dry contact output rating:2 A @ 30 VAC
Open Collector Outputs (3) 32VDC@150 ma max
10 With Ethernet models, the biphase ± can optionally be used as the audio
line in connector.
11 Ethernet models have no UTP analog output only BNC (coax).
Mounts/Accessories
Pendant Arm Mounts
Wall Arm (No Transformer) VG4-A-PAO
Wall Arm (120/230 VAC Transformer) VG4-A-PA1 / VG4-A-PA2
Wall Arm (120/230 VAC Transformer andFiber Optics)
VG4-A-PA1F / VG4-A-PA2F
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate LTC 9542/01
Mast (Pole) Mounting Plate LTC 9541/01
Pendant Pipe Mounts
Pipe Mount Cap VG4-A-9543
Pendant Roof Mounts
Roof (Parapet) Mount VG4-A-9230
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount LTC 9230/01
Power Supplies
Outdoor Power Supply Box (120/230 VACTransformer)
VG4-A-PSU1 / VG4-A-PSU2
Outdoor Power Supply Box (120/230 VACTransformer and Fiber Optics)
VG4-A-PSU1F / VG4-A-PSU2F
Extended temp heater moduleextends temperature rangeto – 60°C (–76°F) for EnviroDome® only
VG4-SHTR-XT
Fiber Optic Models
OpticalFiber Compatibility
50/125 mm, 62.5/125 mm, low loss multimodeglass fiber, rated for a minimum system bandwidthof 20 MHz(video 850 nm/Control 1300 nm)
Max Distance 4 km (2.5 miles)
AutoDome® 500i Series Intelligent PTZ Camera System | 7
1.90
0.75
201.8
7.94
201.2
7.92
216.4
8.52
1
3
4
6
2
5
mm
in.
Indoor System Dimensions
Reference Description
1 Wall Mount – Side with power supply and trim skirt removed
2 Wall Mount – Front with power supply and trim skirt
3 Wall Mount – Back with power supply and trim skirt
4 Pipe Mount
Reference Description
5 In-ceiling Mount – Front
6 In-ceiling Mount – Side
www.boschsecurity.com
8 | AutoDome® 500i Series Intelligent PTZ Camera System
Ø
Outdoor System Dimensions
Reference Description
1 Wall Mount – Side with power supply and trim skirt
2 Wall Mount – Front with power supply and trim skirt
3 Wall Mount – Back with power supply and trim skirt
4 Pipe Mount
5 Mast Mount
6 Corner Mount
7 Roof Mount
8 Roof Mount Adapter
9 Power Supply for Pipe and Roof Mounts
Americas:Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 [email protected]
Europe, Middle East, Africa:Bosch Security Systems B.V.P.O. Box 800025600 JB Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 [email protected]
Asia-Pacific:Bosch Security Systems Pte Ltd38C Jalan PemimpinSingapore 577180Phone: +65 6319 3450Fax: +65 6319 [email protected]
Represented by
© Bosch Security Systems Inc. 2008 | Data subject to change without noticeT3382524555 | Cur: en-US, V14, 18 Mar 2008