automatic knife initialisation - aki - ip dataknife+initialisation+-+aki1.pdf · automatic knife...

1
The Automatic Tool initialization (AKI) makes tool setup quick, easy, and reliable and helps simplify the production process. The Automatic Knife Initialization sets the tip of the tool precisely to the level of the cutting surface or underlay. The process takes only a few seconds and is accurate and reliable. The resulting cut-depth setting is automati- cally saved to the Tool Manager. Because the settings are saved, initialization becomes necessary only after knife or bit changes. This automated setup process minimizes operator errors and increases the efficiency of the entire workflow. Initialization procedure: 1 In the cutter menu, select 1-1-1-2-2 for the Auto init function 2 Remove the AKI from its park position and place it on the cutting surface 3 Start Auto Initialization 4 Return the AKI to its park position Advantages at a glance Precise setting of cut depth. Easy, accurate initialization in seconds. Minimizes risk of operator error. Settings automatically saved in Tool Manager. Contributes significantly to ease of use. Details The AKI provides automatic initialization for the following tools: Kiss-Cut Tool (KCT) without glide disk Universal Cutting Tool (UCT) without fixed glideshoe Electric Oscillating Tool (EOT) Pneumatic Oscillating Tool (POT) Driven Rotary Tool (DRT) Power Rotary Tool (PRT) Wheel Knife Tool (WKT) Scoring/Cutting Tool (SCT) Universal Routing Tool (URT) and all standard bits in absolute mode Routing Module (RMA) with all standard bits in absolute mode Compatible with G3, S3. Automatic Knife Initialisation - AKI ZST-11-2012-m&k/tna/sfr Headquarter Zünd Systemtechnik AG Industriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 757 81 00 ∙ F +41 71 757 81 11 ∙ [email protected] ∙ www.zund.com Headquarters Zünd Systemtechnik AG Industriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 757 81 00 ∙ F +41 71 757 81 11 ∙ [email protected] ∙ www.zund.com

Upload: dangthu

Post on 03-Mar-2019

248 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Automatic Knife Initialisation - AKI - IP DATAKnife+Initialisation+-+AKI1.pdf · Automatic Knife Initialisation - AKI ZST-11-2012-m&k/tna/sfr Headquarter Zünd Systemtechnik AG Industriestrasse

The Automatic Tool initialization (AKI) makes tool setup quick, easy, and reliable and helps simplify the production process.

The Automatic Knife Initialization sets the tip of the tool precisely to the level of the cutting surface or underlay. The process takes only a few seconds and is accurate and reliable. The resulting cut-depth setting is automati-cally saved to the Tool Manager.Because the settings are saved, initialization

becomes necessary only after knife or bit changes.This automated setup process minimizes operator errors and increases the efficiency of the entire workflow.

Initialization procedure:

1 In the cutter menu, select 1-1-1-2-2 for the Auto init function

2 Remove the AKI from its park position and place it on the cutting surface

3 Start Auto Initialization4 Return the AKI to its park position

Advantages at a glance

Precise setting of cut depth.

Easy, accurate initialization in seconds.

Minimizes risk of operator error.

Settings automatically saved in Tool Manager.

Contributes significantly to ease of use.

Details

The AKI provides automatic initialization for the following tools:

• Kiss-Cut Tool (KCT) without glide disk

• Universal Cutting Tool (UCT) without fixed glideshoe

• Electric Oscillating Tool (EOT)

• Pneumatic Oscillating Tool (POT)

• Driven Rotary Tool (DRT)

• Power Rotary Tool (PRT)

• Wheel Knife Tool (WKT)

• Scoring/Cutting Tool (SCT)

• Universal Routing Tool (URT) and all standard bits in absolute mode

• Routing Module (RMA) with all standard bits in absolute mode

Compatible with G3, S3.

Automatic Knife Initialisation - AKI

ZST-

11-2

012-

m&

k/tn

a/sf

r

HeadquarterZünd Systemtechnik AGIndustriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 757 81 00 ∙ F +41 71 757 81 11 ∙ [email protected] ∙ www.zund.com

HeadquartersZünd Systemtechnik AGIndustriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 757 81 00 ∙ F +41 71 757 81 11 ∙ [email protected] ∙ www.zund.com