automatic tintometer - · pdf filepfxi 995/p lovibond rybn, gardner, saybolt colour, astm...
TRANSCRIPT
Model Description
PFXi 995 Lovibond RYBN, AOCS-Tintometer, Gardner, Pt-Co/Hazen/APHA, FAC, beta, Carotene, Iodine,
Hunter Lab, Kreis, Chlorophyll A & B, CIE Values, Spectral Data
PFXi 995/P Lovibond RYBN, Gardner, Saybolt Colour, ASTM Colour, Pt-Co/Hazen/APHA, CIE Values, Spectral
Data, IP Units
PFXi 950/P Saybolt Colour, ASTM Colour, Pt-Co/Hazen/APHA, IP Units, CIE Values, Spectral Data
PFXi880/IP7 Lovibond RYBN, CIE Values, Spectral Data
PFXi880/L Lovibond RYBN, CIE Values, Spectral Data
PFXi880/AT AOCS-Tintometer Colour, CIE Values, Spectral Data
PFXi880/P Saybolt Colour, ASTM Colour, CIE Values, Spectral Data
PFXi880/S Lovibond RYBN, ICUMSA Colour (420, 560, 720nm) CIE Values, Spectral Data
All above models are available with Heater option
ORDERING INFORMATION
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 41
Automatic Tintometer
FEATURES
• RCMSi Remote Calibration & Maintenance Service via internet, USB & LAN Interface
• Extensive yet flexible choice of standard colour scales
• Optional heated sample chamber for maintaining samples at high temp.
• Accommodates cells of up to 6" (153 mm) in length
• Remote upgrade facility for adding scales once in service
• Allows calculation and description of off-hue status
• Gives closest match to stored references
• Generates a customised colour scale from reference samples
• Robust steel construction with excellent chemical resistance
• Easy maintenance with removable sample chamber
• Supplied with colour control software for data analysis
• Output conforming to GLP including date, time, sample & user ID
The PFXi series of spectrophotometric colorimeters introduces a unique concept in liquid
colour control: RCMSi technology (Remote Calibration & Maintenance Service via internet).
Users can benefit from the capability for remote calibration and servicing via the internet -
eliminating any costs and time delays associated with servicing and guaranteeing compliance
with standards.
The PFXi range is supplied with a full range of colour scales for
specific markets including, but not
limited to, Petroleum,
Edible Oils,
Pharmaceuticals, Brewing
and Honey. Users can
upgrade scales remotely at
any time.
The PFXi-880, -950 & -995
series are available with an
optional integrated heater
unit.
SPECIFICATION
• Measuring principle 16 interference filters
• Spectral response 420 – 710 nm
• Bandwidth 10 nm
• Chromaticity +/– 0.0002
• ?E 0.2
• Measurement time Less than 30 seconds
• Baseline calibration Single key press; fully
automated
• Light source 5 Volt, 10 Watt Tungsten
Halogen
• Illuminants CIE Illuminant A, B, C, D65
• Observer 2°, 10°
®
Lo
vib
on
dT
into
me
ter
• Path length 0.1 – 153 mm (0.004" – 6")
• Interface USB, LAN, RS232
• Data storage 100,000+ Measurements
• Input voltage Universal (90 – 214 Vac), via
external power supply
• Compliance CE, RoHS, WEEE
• Display 240 x 128, back-lit graphic display,
(white on blue)
• Keypad 23 key tactile membrane keypad;
washable polyester with audible
feedback
• Instrument Fabricated steel with tough,
housing textured paint finish
PFXi-880,950, 995
Series
Model Description
PFXi-195/1 Pt-Co/Hazen/APHA, Gardner, Iodine, CIE Values, Spectral Data
PFXi-195/2 Saybolt, ASTM Colour, Pt-Co/Hazen/APHA, CIE Values, Spectral Data
PFXi-195/3 FAC, Gardner, CIE Values, Spectral Data
PFXi-195/4 EBC (CIE & 430nm), ASBC (CIE & 430 nm) Series 52(Brown), CIE Values, Spectral Data
PFXi195/5 Pharmacopoeia, (European & US), Pt-Co/Hazen/APHA, CIE Values, Spectral Data
PFXi195/6 Klett Colour (blue filter KS-42), Pt-Co/Hazen/APHA, Hess-Ives Units, CIE Values, Spectral Data
PFXi195/7 ICUMSA Colour (420, 560, 710 nm) Honey Colour, Series 52(Brown), CIE Values, Spectral Data
PFXi-195/8 ADMi (spectral & tristimulus filter methods) Pt-Co/Hazen/APHA, CIE Values, spectral data
PFXi195/9 CIE Values (standard selection), L*C*h colour space, Hunter Lab colour space, Spectral Data
ORDERING INFORMATION
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
SPECIFICATION
• Measuring principle 9 interference filters
• Spectral response 420 – 710 nm
• Bandwidth 10 nm
• Repeatability On measurements of de-
ionised water
• Chromaticity (x y) +/– 0.0004
• ÄE 0.4
• Measurement time Less than 30 seconds
• Baseline calibration Single key press; fully
automated
• Light source 5 Volt, 10 Watt Tungsten
Halogen
• Illuminants CIE Illuminant A, B, C, D65
®
Lo
vib
on
dT
into
me
ter
• Observer 2°, 10°
• Path length 0.1 – 50 mm
• Interfaces USB, LAN, RS232
• Data storage 100,000+ Measurements
• Input voltage Universal (90 – 240 Vac), via external
power supply
• Compliance CE, RoHS, WEEE
• Display 240 x 128, back-lit graphic display,
(white on blue)
• Keypad 23 key tactile membrane keypad;
washable polyester with audible
feedback
• Instrument Fabricated steel with tough,
housing textured paint finish
The PFXi series of spectrophotometric colorimeters introduces a unique concept in liquid colour
control: RCMSi technology (Remote Calibration & Maintenance Service via internet).
The PFXi range is supplied with a full range of colour scales for specific markets including, but
not limited to, Petroleum, Edible Oils, Pharmaceuticals, Brewing and Honey. Users can upgrade
scales remotely at any time.
Every PFXi is supplied with colour control software for data analysis (LAN & USB cable provided).
Optical glass cells, a certified glass calibration filter, a spare lamp and user instructions included.
Electronic Tintometer
PFXi-195Series
FEATURES
• RCMSi Remote Calibration &
Maintenance Service via
internet
• USB & LAN Interface
• Large clear LCD screen
for ease of use and
ability to display
graphs and data in
a wide variety of
languages
• Extensive yet flexible choice of
standard colour scales
• Remote upgrade facility for adding scales once in service
• Allows calculation and description of off-hue status
• Gives closest match to stored references
• Generates a customised colour scale from reference samples
• Robust steel construction with excellent chemical resistance
• Easy maintenance with removable sample chamber
• Supplied with colour control software for data analysis
• Output conforming to GLP including date, time, sample & user ID
• Accommodates a range of sample cells and tubes
Model Description
Model F Standard model for applications including fats and fatty oils, bleached lac, liquid
chemicals and pharmaceuticals.
Model F (BS 684) Version for measuring animal and vegetable fats and oils according to BS 684 Section
1.14, ISO 15305 and AOCS Method Cc 13e-92. Racks are fitted with colourless glass
compensating slides in the sample field.
ORDERING INFORMATION
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 43
Model FSeries
The Model F is a visual colorimeter designed to optimise the use of Lovibond® glass filters in order
to express colour in terms of Lovibond® Red, Yellow, Blue and Neutral.
It is arranged with two adjacent fields of view, seen through the viewing tube, so that the product in
the sample field and a white reflective surface in the comparison field are observed side by side,
suitably illuminated.
The Lovibond® glasses are introduced into the comparison field by a simple system of sliding racks,
allowing the user to compare the colour of light which is either transmitted through, or reflected
from, the sample.
A series of neutral glasses in racks is also supplied; these can be introduced into the sample field to
'dull' the colour of products which are too bright to obtain a good colour match using Lovibond®
Red, Yellow or Blue glasses. The racks allow a visual colour match to be found from the light from
the sample and its colour can then be expressed in Lovibond® units.
SPECIFICATION
• Measuring principle Visual, in terms of Lovibond® units
• Modes Transmittance, reflectance
• Range 0.1 - 7 Red, Yellow; 0.1 - 4 Blue; 0.1 - 3.9 Neutral
• Resolution 0.1 Lovibond® unit
• Optical system 11 glass-filled nylon racks containing a graduated range of Lovibond® colour standards
• Viewing system Fully adjustable, prismatic with integral blue filter for light standardisation
• Light source 2 x 12 Volt, 10 Watt tungsten halogen lamp
• Illuminant Approximates to daylight
• Path length Up to 153 mm (6”)
• Power pack Universal, via external power supply
• Approvals CE
• Instrument housing Fabricated sheet steel with a tough, textured paint finish
FEATURES
• Glass colour standards housed in durable racks
• External, low-voltage regulated power supply
• Prismatic optical system provides improved colour matching
• Balanced field of view
• Diffused tungsten-halogen light source
• Replaceable sample chamber liner
Lovibond Tintometer
®
Lo
vib
on
dT
into
me
ter
Colour Scale Nominal Certified Value Order Code Accreditation Standard
AOCS-Tintometer 0.3R 2.0 Y (5¼") 134240 ISO 9001
Colour 1.0R 9.0Y (5¼") 134250 ISO 9001
(AOCS Cc 13j-97, 1.2R 12.0Y (5¼") 134260 ISO 9001
Cc 13b-45) 2.2R 22.0Y (5¼") 134270 ISO 9001
3.6R 28.0Y (5¼") 134280 ISO 9001
ASTM Color 0.4 (<0.5) 134290 UKAS
(ASTM D6045, 1 134000 UKAS
D1500) 3 134010 UKAS
5 134020 UKAS
Gardner Colour 2 134200 UKAS
(ASTM D1544, 5 134210 UKAS
D6166) 8 134220 UKAS
Lovibond 0.4R 1.9Y 0.1N (5¼") 134080 ISO 9001
RYBN Colour 1.0R 4.3Y 0.1N (5¼") 134090 ISO 9001
(AOCS Cc 13j-97) 1.4R 7.3Y 0.2N (5¼") 134100 ISO 9001
1.6R 11.0Y 0.1N (5¼") 134110 ISO 9001
1.8R 14.0Y 0.3N (5¼") 134120 ISO 9001
2.5R 24.0Y 0.5N (5¼") 134130 ISO 9001
3.3R 33.0Y 0.3N (5¼") 134230 ISO 9001
Platinum-Cobalt 5 mg Pt/l 134140 ISO 9001
Colour 10 mg Pt/l 134150 ISO 9001
(ASTM D1209) 15 mg Pt/l 134160 ISO 9001
30 mg Pt/l 134170 ISO 9001
50 mg Pt/l 134180 ISO 9001
100 mg Pt/l 134190 ISO 9001
500 mg Pt/l 462803 UKAS
Saybolt Colour -10 134040 UKAS
(ASTM D6045, 0 134050 UKAS
D1500) +12 134060 UKAS
+25 134070 UKAS
ORDERING INFORMATION
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
®
Lo
vib
on
dT
into
me
ter
W600 Optical Glass Cells for Lovibond Tintometers
10 mm 60 59 60 W600/OG/10
25 mm 60 59 90 W600/OG/25
33 mm 60 60 10 W600/OG/33
40 mm 60 60 20 W600/OG/40
50 mm 60 62 00 W600/OG/50
100 mm 60 60 30 W600/OG/10011/16" 60 60 40 W600/OG/ / "16
1/4" 60 60 60 W600/OG/¼"
1/2" 60 60 70 W600/OG/½"
1" 60 60 80 W600/OG/1"
2" 60 60 90 W600/OG/2"
51/4" 60 61 30 W600/OG/5¼"
6” 60 61 50 W600/OG/6”
Path Length Order Code Cell Type
Cells for PFX995/950/880/195 Series, Tintometer Model F The Cells are 21mm width, 40 mm height and are supplied without lids.
Lovibond Certified Colour Reference Materials (500 ml) Certified
• Ideal for routine calibration of colour measuring instruments & verification of test data
• Ensure good inter-laboratory and inter-instrument correlation
• Applications in statistical quality control (SQC) and statistical process control (SPC)
• High stability standards with a guaranteed 12-month shelf-life
• Full traceability to internationally recognised standards
• All classified as non-hazardous according to EU directives
• Each bottle supplied with full certification including MSDS
The values indicated are typical nominal values; individual values may vary but these
are always specified on the certificate of calibration supplied with each standard:
We supply precision fused cells in a range of dimensions and path lengths, made from optical glass to the highest standards at our own factory. For instruments equipped with a heater unit and whenever cells are subjected to thermal shock, it is recommended that borosilicate cells be used.
Model Description
Lovibond Comparator & Nessleriser Instruments
14 20 00 Comparator 2000+
— DB 424-13.5mm, 10ml, Plastic Comparator Cells each
17 10 10 Daylight 2000 Comparator
17 10 20 Daylight 2000 Nessleriser
17 21 50 Nessleriser 2150 with stand
17 22 50 Nessleriser 2250 with stand
17 20 30 Nessleriser 2150 with Daylight 2000
17 20 40 Nessleriser 2250 with Daylight 2000
35 30 60 AF 306 Pair of Nessler Cylinders 50ml 113mm (BS 612)
35 30 80 AF 306/P Pair of Nessler Cylinders 50ml 113mm with glass anti-meniscus plungers
35 42 00 DB 420 Pair of Nessler Cylinders 250 mm with glass anti-meniscus plungers
35 31 50 AF 315 Special Nessler tube pair (determination of oxygen with disc NOE)
Colour Disc for Colour Comparison
284170 NSH, Hazen Scale Disc, 10 - 90
284120 NSB, Hazen Scale Disc, 70 - 250
284130 NSX, Hazen Scale Disc, 50 - 300
284150 CAA, Hazen Scale Disc, 0 - 30
284160 CAB, Hazen Scale Disc, 30 - 70
243030 4/30AS, Gardner Scale Disc, 1 - 9
243040 4/30BS, Gardner Scale Disc, 10 - 18
Pt-Co/Hazen/APHA Colour Kit (Option 1)
AF 329 Pt-Co/Hazen/APHA Colour, 0-250mg Pt/l, Nessleriser
Nessleriser 2150 with Daylight 2000 Lighting Unit and Nessler cylinders, Nessleriser 2250 upgrade with
Nessler cylinders, Discs CAA range 0-30mg Pt/l, Discs CAB range 30-70mg Pt/l, Discs NSB range 70-
250mg Pt/l
Pt-Co/Hazen/APHA Colour Kit (Option 2)
AF 325 Pt-Co/Hazen/APHA Colour, 10-250mg Pt/l, Nessleriser
Nessleriser 2150 with Daylight 2000 Lighting Unit and Nessler cylinders, Discs NSH range 10-90mg Pt/l,
Discs NSB range 70-250mg Pt/l
Pt-Co/Hazen/APHA Colour Kit (Option 3)
AF 328 Pt-Co/Hazen/APHA Colour Low Range, 0-70mg Pt/l, Nessleriser
Nessleriser 2250 with Daylight 2000 Lighting Unit and Nessler cylinders, Discs CAA range 0-30mg Pt/l,
Discs CAB range 30-70mg Pt/l
Gardner Colour Scale Kit
AF 334 Gardner Colour, 1 - 18 units, Comparator
Lovibond Comparator 2000+ with Daylight 2000 Lighting Unit, W680/OG/10 mm Cell, Disc 4/30 AS
range 1 - 9 units & Disc 4/30 BS range 10 - 18 units
Lubricating Petroleum Oil Comparator (Option 1)
AF509/C ASTM Colour Ltd. Range ASTM D1500, 1 - 5 units, Comparator
Comparator 2000+ with W680/OG/33mm Cell and Disc 4/81 1.0-5.0 units
Lubricating Petroleum Oil Comparator (Option 2)
AF 650 ASTM Colour, ASTM D1500, 0.5 -8 units, Comparator
Comparator 3000 with AF 763 Tube and Disc 1 0.5-7.5 units and Disc 2 1.0-8.0 units
EBC Colour Scale (for Breweries)
AF 330 EBC Colour European Brewery Convention, 2 - 27 units, Comparator
Comparator 2000+ with Daylight 2000 Lighting Unit, W680/OG/25 mm Cell with Disc 4/14A 2-6 unit,
Disc 4/14B 6-10 unit, Disc 4/14C 10-18 unit and Disc4/14D 19-27 unit
ORDERING INFORMATION
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 45
®
Lo
vib
on
dT
into
me
ter
Color Comparator
Color Comparator
Lovibond® Comparator System 2000+
A flexible, modular system for Visual Colour Grading
Using a suitable Comparator instrument, the sample
is visually matched against calibrated, colour stable
glass standards in test discs. The Comparator 2000+
is a short path length instrument (up to 40 mm) for
visually matching samples with relatively dark
colours. Nessleriser systems are longer path length
instruments for matching a column of sample in a
glass cylinder of appropriate path length.
Lovibond® Gardner Comparator 3000
A single scale, 3-fi eld instrument for visual colour grading by direct comparison between the sample and Lovibond® glass
colour standards housed in a pair of discs. The advantage of a 3-section field of view is that the sample and two consecutive
glasses on the colour scale are viewed simultaneously, making it easier to achieve the optimum colour match.
Model Description
400300 RT300:0°/45°
400400 RT400:diffuse/8° sphere
400500 Rt500:diffuse/8° sphere
400610 RT Colour Software (for RT300, RT500)
400620 Benchtop Stand
400630 Liquid Cell Holder (recommended for use with benchtop stand)
400640 Powder Cell Holder
400660 V-block Sample Holder
400680 Pellet Holder
ORDERING INFORMATION
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
®
Lo
vib
on
dT
into
me
ter
Reflactance Portable Spectrophotometer
FEATURES
• Lightweight, compact, portable instruments
• Diffuse/8° sphere or 0º/45º optical geometry
• Large, easy-to-read graphical LCD display
• Opacity and colour strength measurement
• Flip-back target shoe for flexible use
• Rugged construction
• Rechargeable battery for remote use
SPECIFICATION
• Measuring geometry RT300: 0°/ 45°; RT400 & 500: diffuse/8° sphere
• Spectral response 400 - 700 nm
• Bandwidth 10 nm measured; 10 nm output
• Repeatability RT300 & 400: rE=ab* = 0.1 on white reference
RT500: rE=ab* = 0.05 on white reference
• Measurement range 0 - 200% reflectance
• Measurement area RT300: 7 mm; RT400 & RT500: 8 mm
• Measurement time Approximately 2 seconds
• Light Source Gas-filled tungsten lamp
• Illuminant C, D50, D65, D75, A, F2, F7, F11 & F12
• Observer 2°, 10°
• Interface RT400: RS232; RT300 & 500: interface to RT Colour Software via patented bi-
directional RS232, 300 - 57600 baud
• Data Storage 1024 standards with tolerances, 2000 samples
• Display 128 x 256 pixel in-built graphic LCD
• Lamp Life Approx. 500,000 measurements
• Power Supply Removable (Ni-metal hydride) battery
• AC adapter requirements 90 - 130VAC or 100 - 240VAC, 50 - 60Hz, 15W max
• Charge time Approx. 4 hours - 100% capacity
• Measurements per charge 1000 measurements within 8-hour period
• Sphere Spectralon® (a durable, highly reflective material that prevents premature
(RT400 & RT500) degradation)
RTSeries
The RT 250, RT 300, RT 400 and RT 500 are versatile, portable spectrophotometers in a choice
of diffuse/8° sphere or 0°/45° optical geometry that are designed to give fast, precise and
accurate colour measurement information on a range of products. They provide absolute and
difference measurements in various colorimetric systems.
The RT 300 and RT 500 can be combined with the OnColorTM software package allowing
measurement data to be downloaded, analysed in detail and stored indefinitely on a PC.
The RT 250, RT 300, RT 400 and RT 500 can also be combined with a wide range of accessories
allowing the repeatable measurement of liquids, gels, powders and other materials.
Model Description
401100 Lovibond® LC 100 Spectrophotometer
401120 Integrated Package : LC 100 & SV 100 Kit
132750 Replacement Cells (10mm, Pk 100)
ORDERING INFORMATION
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 47
LC 100 SV 100
®
Lo
vib
on
dT
into
me
ter
FEATURES
• Hand-Held Imaging Spectrocolorimeter
• Unique housing stand to protect sample from ambient light
• Enables measurement of food, powders, cosmetics & pastes
• Versatile Communication of Colour Measurement
• Single, Simple, Reliable, Integrated Tool - no need to connect to PC
• Readings and Comparison Charts within Seconds
• Information on Colour and Surface Texture Effects
• Conformance Reports in PDF and Excel Formats
• Precise Image Sampling with 9 Band Accuracy
SPECIFICATION
• Measuring Geometrics 45/0 Image Capture
• Light Source Independent tri-directional 25 LED (8* visible wavelengths; 1* UV)
• Illuminant/Observer D65&A(10)
• Standards/Sample Storage 20/350
• Measurement Time 1.8 seconds
• Measuring Area 4 & 8mm
• Short Term Repeatability Typical 0.10 ÄE 94 on white (D65/10)
• Display 4.5cm Colour TFT
• Data Interface USB (Mass Storage Device)
• Operating Temperature 0° to 40°C (50° to 104°F)
• Storage Temperature -20° to 60°C (-4° to 140°F)
• Humidity Range 20-80% RH (non-condensing)
• Usage Indoor Use Only
• Altitude 2000m
• Polution Degree 2
• Transient Overvoltage Category II
The Lovibond® LC 100 and SV 100 integrated package provides a unique solution to users looking
to measure food, powders, cosmetics and pastes.
The SV 100 holder supports the LC 100 at an ergonomic viewing angle to enable the
measurements in Lovibond® optical cells. A secure cap is provided to cover the sample, protecting
it from any excessive ambient light, enabling quick yet accurate readings.
The units are provided in a purpose-designed case containing all the accessories required for
accurate colour measurement expected of the Lovibond® brand.
The Lovibond® LC 100 enables setting and maintaining colour standards throughout the
manufacturing process. It is a lightweight tool that is easy to handle and ready to use. In just over a
second, it not only provides a reading of the sample but also a report telling how close the colour is
to a measured standard. Together with the Lovibond® SV 100, it is the ideal solution for the colour
measurement of food, powder, cosmetics, pastes and pharmaceuticals.
The LC 100 automatically creates conformance reports in either PDF or Excel formats for each
stored sample against each standard. These can easily be shared with a PC or directly to a
compatible printer (via USB mass storage mode).
Reflactance Hand-Held Spectrophotometer
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
COD System
ORDERING INFORMATION
Model Description
2892502 COD-Setup COD complete with photometer, 2 sets of tube tests 25 vials 0-150 mg/l,
and 0-1500 mg/l and Reactor
COD-reactor
COD Reagent Vials
242 07 20 0 - 150 mg/l O2
242 07 21 0 - 1500 mg/l O 2
242 07 22 0 - 15000 mg/l O 2
COD System
Chemical oxygen demand (COD) is an important parameter for the assessment of municipal and
industrial waste water. COD is used to analyse the organic component of water by determining
the amount of oxygen required to oxidise these components.
During COD determination, the sample is heated and strong oxidising agents added to convert
the organic matter present. In combination with high temperatures, the oxidising agents ensure
complete oxidation of the organic components in the water. The COD value therefore indicates the total level of
oxidised organic components in the water sample.®
CHECKIT COD
The COD test setup allows highly sensitive and precise water testing with minimum effort. It measures the
amount of oxygen required for oxidation of the water components by photometric means.
A known sample volume is added to a COD vial test, which is heated in the reactor and then analysed in the
COD vario photometer.
COD vario photometer
With a measuring range from 0 to 15,000 mg/l O , the COD vario photometer is suitable for waste water 2
testing.
Two LEDs light sources with long-term stability (n1 = 605 nm; n2 = 430 nm), a waterproof sample chamber, a
large digital display, and the user-friendly keypad ensure maximum operating reliability and convenience.
COD vario tube tests
The COD tube tests are available for the measuring ranges 0-150 mg/l O , 0-1500 mg/l O and 0-15000 mg/l O . 2 2 2
Their chemical properties and a 16 mm tube diameter is suitable also for use with Hach photometers.
®
Lo
vib
on
dT
into
me
ter
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 97
BOD System
ORDERING INFORMATION
Model Description
02444406 BOD OxiDirect System with 6 Sensors
02444410 BOD OxiDirect System with 12 Sensors
418328 BOD CM Test Tablets Box/8 Tablets
41 86 45 BOD Sample Bottles, Brown Glass, 500 ml (without sensor head)
02444430 Sensor Head
41 86 57 Overflow Flask, 157 ml
41 86 60 Overflow Flask, 428 ml
2 41 86 34 Potassium Hydroxide Solution, 45 %, 50 ml
2 41 86 42 Nitrification inhibitor (N-ATH), 50 ml
®
Lo
vib
on
dT
into
me
ter
BOD System
Accurate Direct, Easy to use, Flexible, (n=1-28 days)
Environmentally-friendly
Biochemical Oxygen Demand (BOD)
BOD – biochemical oxygen demand – is an expression for the quantity of oxygen
required for biological degradation of organic matter in a waste water sample. BOD
measurement is therefore used as a basis for the detection of biologically degradable
organic matter in water. The difference between BOD and chemical oxygen demand
(COD) is that the COD additionally registers biologically non-degradable organic matter.
BOD measurement is therefore an important measurement of
the effects of domestic and industrial waste water on sewage
plants and outflow points. Manometric, respirometric BOD measurement using
® the Lovibond OxiDirect BOD meter® ®
The Lovibond sensor system OxiDirect is a 6 sample
system that allows precise measurement of BOD
based on the manometric principle. Manometric
respirometers relate oxygen uptake to the change
in pressure caused by oxygen consumption while
maintaining a constant volume. Thanks to the
modern integral pressure sensors, it is no longer
necessary to use mercury for pressure measurement.
®
Incubator with glass door
• Backlit Display
• 2 °C to 40 °C
• adjustable in steps of 0.1 °C
• 20 °C BOD determination
• 4 °C storage of waste water samples
• 25 °C Enzyme activity (TTC test)
• 37 °C Colony count
• BOD-Measurement
• Microbiological Research
• Food industry
• Dairies
• Laboratories
• Research Centres
• Universities
Highlights
Applications
Incubators-Thermostatically Controlled
BOD Measurement System
ORDERING INFORMATION
Model Capacity Type
ET 619 140 ltr. 3 racks
ET 627 195 ltr. 4 racks
ET 637 280 ltr. 5 racks
ET 651 395 ltr. 5 racks
Incubators
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
TurbiDirect
TurbiCheck
ORDERING INFORMATION
ORDERING INFORMATION
Model Description
194000 Turbidity Meter
Accessories
19 41 50 Set Turbidity Standards T-CAL (<0.1, 20, 200, 800 NTU)
Model Description
26 60 20 Lovibond® TurbiCheck turbidity meter as described above, complete with 4 turbidity
standards < 0.1, 20, 200, 800 NTU, battery and test vial, in case, ready to use
Accessories
19 41 50 < 0.1, 20, 200, 800 NTU Turbidity Standard, 4/set
®
Lo
vib
on
dT
into
me
ter
Turbidity Meter
TurbiDirect with infra-red light source
High-precision instrument for laboratory and mobile use
Turbidity is measured according to EN ISO 7027 by nephelometric means (90° scattered light). The
infra-red light-source permits measurement of coloured and colour-free samples.
The automatic measurement range detection facility (Autorange) enables direct turbidity
measurement from 0.01 to 1100 NTU with an accuracy of ± 2% up to 500 NTU and ± 3% thereafter.
A large graphic display, a choice of several different languages and user-friendly operating
instructions make the device extremely easy to use.
The compact Lovibond® infrared turbidity meter TurbiCheck is designed to allow fast, precise on-
site testing. The unit measures the scattered light at an angle of 90°, as stipulated in EN ISO 7027.
The wide measuring range from 0.01 - 1100 TE/F = NTU = FNU makes the instrument suitable for
various applications, ranging from drinking water to waste water.
As infrared light is used for measurement purposes, the unit can be used to test both coloured and
colourless liquids.
The standards required for calibration of the unit are also supplied. A second adjustment mode
allows alternative adjustment with user-defined turbidity standards.
Highlights
• Meets EN ISO 7027
• Automatic overall range adjustment
with Standards-Set-T-Cal
• High accuracy
• For laboratory and mobile use
• RS232 interface
• Storage for up to 1000 data-sets
• Real-time clock
• Waterproof sample chamber and
housing
Highlights
• Range 0.01 - 1100 NTU
• Measurement with infrared light
at an angle of 90°
• Measurement of coloured liquids
• Easy handling
• 600 tests without battery change
TurbiCheck with infra-red light source (EN ISO 7027)
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 99
SensoDirect200
ORDERING INFORMATION
Model Description
72 22 20 SensoDirect Con200 Hand Held Meters
72 22 25 SensoDirect Conductivity Cell, 4-Pole Technology
72 22 50 Calibration Solutions 1413 µS/cm
72 32 20 SensoDirect Oxi200 Hand Held Meters
72 32 01 Oxygen Sensor, 1.5 m cable
72 32 50 Service set Oxygen Sensor 3 interchangeable membrane heads, 100 ml plastic bottle KOH-
solution 3 mol/l
®
Lo
vib
on
dT
into
me
ter
ORDERING INFORMATION
Model Description
724610 SD 300 pH (SET 1), instrument, batteries, pH/temp. plastic-electrode type 230, pH-buffer-set
(pH 4.00/7.00/10.00), in case, manual, guarantee sheet
721230BNC pH/temp.-electrode type 230 plastic/gel/temperature NTC30kOhm (Set 1)
724611 SD 300 pH (SET 2), as SET1, but with pH / temperature plastic-electrode type 225,
temperature sensor Pt 1000, manual, guarantee sheet
721225BNC pH-electrode plastic/gel-type 225
SD300 pH
pH/TDS/DO MetersSensoDirect 200 / 300Lovibond® Hand-Held Meters SensoDirect 200 (IP 67 water proof)
Determination of: Conductivity/TDS /Dissolved Oxygen
The new microprocessor-controlled SensoDirect range of handheld meters from Lovibond
meets the day-to-day demands for sturdy and reliable systems for the measurement of
conductivity/TDS and dissolved oxygen.
The water-tight housing complies with IP67 and is equipped as standard with protective armouring and built-
in electrode holder, ensuring reliable operation even in extreme ambient conditions.
The support can be flipped up to hang the meter on pipes or branches.
A direct, easily understood user interface, outlining the required configuration
options for all three systems, facilitates meter operation both outdoors and in the
laboratory.
The automatic Hold function "freezes" stable measuring data in the
display and indicates the presence of stable and reproducible results.
The internal memory allows storage of 20 data sets to facilitate
subsequent evaluation. The integral automatic switch-off feature,
varying from 1 to 120 minutes, increases the operating life of the
units.
The power consumption of all two units has been reduced to a
minimum. As a result, the 4 x 1.5 V integrated batteries have an
operating life of up to 15000 hours, depending on the unit version.
®
SD300 pH (IP 67 waterproof)
Waterproof Hand-held Meter for pH/Redox/Temperature
• Rugged, water resistant (IP 67) designed for field use
• PC interface for data download (USB / serial or analog)
• Automatic buffer detection for calibration
• Data logger and alarm function (min./max.)
• Good Laboratory Practice (GLP-features)
• Clear, concise result reading: easy-to-read backlit LCD display
• Automatic temperature compensation
• High resolution (0.001 pH / 0.1 mV)
• Drinking Water
• Cooling/Boiler Water
• Waste Water
• Pool Water
• Surface Water
Highlights
Applications
TDS
DO2
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
SensoDirect150 Series
SensoDirect110 Series
ORDERING INFORMATION
ORDERING INFORMATION
Model Description
72 42 00 SensoDirect 150 set, pH / Con / TDS / Oxi instrument, batteries, pH electrode, temperature
probe, conductivity probe, oxygen sensor, pH buffer set 4,00 / 7,00, electrolyte, membrane
heads, instruction manual, guarantee sheet, in case
72 42 10 SensoDirect 150 set, pH / Con / TDS instrument, batteries, pH electrode, temperature probe,
conductivity probe, pH buffer set 4,00 / 7,00, instruction manual, guarantee sheet, in case
72 42 20 SensoDirect 150 set pH / Oxi instrument, batteries, pH electrode, temperature probe, oxygen
sensor, pH buffer set 4,00 / 7,00, electrolyte, membrane heads, instruction manual, guarantee
sheet, in case
721330 Spare electrode, (approx. 1 m cable), plastic/gel type BNC-plug
721250 pH buffer set 4.00/7.00/10.00 (25°C)
721242 Redox electrode, (approx. 1 m cable), plastic/gel type BNC-plug
722250 Calibration solution 1413 ìS/cm
724460 Spare membrane for oxygen sensor
724470 Spare electrolyte for oxygen sensor
724420 Temperature probe PT1000 (approx. 1.5 m cable)
Model Description
72 13 00 SensoDirect pH 110 complete set, instrument, battery, pH buffer (4.0/7.0) pH plastic electrode
110, carry in case
72 13 30 pH-electrode plastic/gel, type pH110
72 23 00 SensoDirect Con110 complete set, instrument, battery, conductivity sensor, carry in case
72 22 50 Conductivity calibration solutions, 1413 µS/cm, 500ml
72 33 00 SensoDirect Salt 110, battery, sensor, in case
®
Lo
vib
on
dT
into
me
ter
Highlights:
• pH/Redox Conductivity
Dissolved Oxygen etc.
• All in one
• Real time data logger
• Large digital display
• Protective casing
• RS 232 / USB
Applications:
• Drinking water
• Cooling/Boiler Water
• Waste Water
• Pool Water
• Surface Water
• Water Treatment Companies
• Industrial and Governmental Laboratories
pH/TDS/DO MetersSensoDirect 150 / 110
SensoDirect 150 Series Multi Parameter Hand-Held Meter
SensoDirect 110 Series for pH, Conductivity & Salinity
pH 110 - The SensoDirect pH 110 is a high quality, portable, battery operated pH meter with a
measuring range of 0 - 14 pH. The instrument is equipped as standard with protective casing and
built-in electrode holder, ensuring reliable operation even in extreme ambient conditions. The unit
is equipped with an automatic battery check feature. If the low battery indicator appears it is time
to change the battery.
Con110 - The SensoDirect Con110 is a compact and versatile meter that
can be used wherever there is a need to measure conductivity accurately
and quickly. The unit is extremely easy to use and equipped as standard
with a protective casing and built-in electrode holder.
It is equipped with a LC display showing two or three decimal places and
a measuring range either of 0.001 - 1.999 or 0.01 - 19.99 mS/cm.
Salt110 - The portable SensoDirect Salt110 provides fast, accurate
readings and the convenience of a remote probe separately.
The measuring range of this salt tester is 0 to 10 % salt ( % weight ).
The SensoDirect Salt110 includes an automatic temperature
compensation feature. The unit is extremely easy to use and is equipped
as standard with a protective casing and built-in electrode holder.
The SensoDirect 150 combines the features of several hand-held meters. It is designed for
multipurpose operation and measures pH/Redox, dissolved oxygen and conductivity/TDS.
The SensoDirect 150 incorporates an intuitive user interface, large, easy to read display
and is supplied with a sturdy handy case with electrodes, buffer solution and accessories.
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 101
MD100Photometer
®
Lo
vib
on
dT
into
me
ter
Photometer
MD 100 PhotometerPrecise Water Analysis in High- Quality Design Small • Mobile • Rapid
Designed to meet the latest technical requirements, the MD 200 photometer can be used in
practically every area of water analysis.
The high-precision optics with its top-quality interference filters uses long-term stable LEDs as
light-source. Because there are no moving parts, the entire measurement device requires absolutely no
maintenance. Precise and reproducible analysis results are obtained in a short time. The units impress with
their user-friendliness, ergonomic design, compact dimensions and easy handling.
The tests are conducted using either Lovibond®tablet reagents with long-term stability and a guaranteed
minimum 5 or 10 year shelf life or using liquid reagents.
Precise results using high-quality interference filters
single Parameter
•COD
2 in 1
•Chlorine, pH
•Copper, pH
•Hydrogen peroxide, pH
3 in 1
•Chlorine, pH, Bromine
•Chlorine, pH, Stabilizer
•Chlorine, pH, Alkalinity-M
4 in 1
•Chlorine, pH, Stabilizer, Alkalinity-M
5 in 1
•Chlorine, pH, Stabilizer, Alkalinity-M, Calcium hardness
6 in 1
•Chlorine, Bromine, pH, Stabilizer, Alkalinity-M, Calcium
hardness
MD 200 Photometer
The MD 100 uses high quality interference filters with long-life LEDs as a light source without any
moving parts in a transparency sample chamber. The units supply accurate, reproducible results
very quickly. Other major advantages include ease of operation, ergonomic design, compact dimensions and
safe handling. The calibration and software-based adjustment options mean that the MD 100 is also suitable
for use as a testing instrument. The tests are conducted using either Lovibond® tablet reagents with long-term
stability and a guaranteed minimum 5 or 10 year shelf life, VARIO powder reagents or using liquid reagents.
Single Parameters• Aluminium• Ammonia• Ammonium• Monochloramine• Chlorine• Chlorine DUO• Chlorine HR • Chlorine dioxide• COD• Copper• Hardness, total• Hazen• Iron• Iron TPTZ
Single Parameters• Fluoride• Manganese LR• Manganese HR• Molybdenum LR • Molybdenum HR• Molybdenum• Monochloramine • Phosphate• Silica• Silica LR• Silica HR• Suspended solids • Urea
MD200Photometer
Highlights• Scroll Memory• Automatic switch-Off• Real-Time-Clock and Date• Calibration Mode• Backlit Display• Storage Function• One Time Zero (OTZ)• Waterproof**as defined in IP 68, 1 hour at 0.1 meter, buoyant
Highlights
• Scroll Memory
• Automatic switch-Off
• Real-Time-Clock and Date
• Calibration Mode
• Backlit Display
• Storage Function
• One Time Zero (OTZ)
• Waterproof*
*as defined in IP 68, 1 hour at 0.1 meter
2 in 1
•
3 in 1
•Chlorine, pH, Stabilizer
•Chlorine, pH, Alkalinity-M
•Chlorine, pH, Alkalinity-M (total)
•Chlorine LR, Chlorine HR, Chlorine dioxide
4 in 1
•Chlorine, pH, Stabilizer, Alkalinity-M,
•Chlorine, pH, Stabilizer, Alkalinity-M (total)
5 in 1
•Chlorine, pH, Stabilizer, Alkalinity-M, Calcium hardness
6 in 1
•Chlorine, Bromine, pH,Stabilizer, Alkalinity-M, Calcium hardness
Chlorine, pH
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
PCMultidirectPhotometer
ORDERING INFORMATION
ORDERING INFORMATION
Model Description
21 40 20 MD600, Modern mobile photometer
Model Description
21 00 00 Multidirect Photometer System
®
Lo
vib
on
dT
into
me
ter
Alkalinity-M
Alkalinity-P
Aluminium
Ammonia
Bromine
Chloride
Chlorine
Chlorine Dioxide
Chromium
COD
Copper
DEHA
Fluoride
Hydrogen Peroxide
Iron
Modern, Mobile Photometer System
The MultiDirect is a contemporary, microprocessor-controlled photometer with ergonomically
designed keypad and large-format graphic display. It is equipped with a wide range of
preprogrammed methods based on the proven range of Lovibond® tablet reagents, liquid
reagents, tube tests and powder reagents (VARIO Powder Packs). Users can also store their own methods.
The MultiDirect is a filter photometer using interference filters at 6 different wavelengths. The unique design
of the optics allows the automatic selection of the required wavelength without any moving parts. This and
the dual beam technology utilizing an internal reference channel, guarantees the highest accuracy.
The MultiDirect Photometer can be used for the following tests:
Photometer
PCmultidirect Photometer System
With the modern design of the MD 600 we have succeeded in combining the
mobility of a portable photometer with the characteristics of a modern
laboratory photometer.
This unit covers all the important parameters of water analysis, from aluminium to zinc. The high
level of accuracy of Lovibond® reagents and the user-friendly nature of the instrument
guarantee rapid and reliable analysis of your water samples. Depending on the application, the
unit will operate with tablet reagents, powder packs, liquid reagents or tube tests (16 / 13 mm).
Highlights
• Automatic wavelength selection
• Easy handling
• Backlit display
• Storage (upto 1000 data)
• More than 120 methods
• 35 user defined methods
• Infrared interface
• Waterproof*
• Mobile
*as defined in IP 68, 1 hour at 0.1 meter
Highlights
• Dual Beam Technology and interference
Filters for highest accuracy
• A wide range of pre-programmed methods
• Long-term stable LEDs as light sources
• Update of new methods and languages via
internet (free of charge)
• Interface
• Memory for 1000 data sets Mobile
MD600Photometer
Manganese
Molybdate
Nitrate Vario
Nitrite
Ozone
PH MB
Phosphate
Potassium
Silica
Sulphte
Sulphide
Sulphite
Nitrogen Total LR
Nitrogen Total HR
Urea
Zinc
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 103
SpectroDirect
ORDERING INFORMATION
Model Description
71 20 05 Spectrophotometer SpectroDirect
®
Lo
vib
on
dT
into
me
ter
ORDERING INFORMATION
Model Description
511052BT Reagent Tablet, DPD No. 1, Pack of 500
511532 Reagent Tablet, DPD No. 2, 500
511082BT Reagent Tablet, DPD No. 3, Pack of 500
511222BT Reagent Tablet, DPD No. 4, Pack of 500
515371BT Low Range Tablets,Iron LR, Pack of 250
515381 High Range Tablets, Iron HR, Pack of 250
513171 Ozone Tables, Pack of 250
513130 Reagent Tablet, Silica No.1, Pack of 100
513140 Reagent Tablet, Silica No .2, Pack of 100
511752BT Phenol Red Tablet, Phenol Red, Pack of 500
Tablet Reagents
Spectrophotometer SpectroDirectSpectrophotometer for water and waste water testing 330 - 900 nm
The SpectroDirect is a modern single-beam spectrophotometer with an excellent
price/performance ratio that is specifically designed for water testing. The instrument is
equipped with a wide range of pre-programmed methods based on the proven range of ®
Lovibond tube tests, tablet reagents, liquid reagents and powder reagents (Vario Powder Packs).
Functions
• Pre-programmed Lovibond® methods
• Absorption
• Transmission
• Spectral data recording
• User calibration (polynomials)
• Concentration (linear)
• Kinetics
Alkalinity-MAlkalinity-PAluminiumAmmoniaArsenicBromineCadmium
The SpectroDirect can be used for the following tests:
ChlorideChlorineChlorine HRChlorine DioxideChromiumCODCopper
CyanideDEHAFluorideFormaldehydeHazen/APHAHydrogen PeroxideIron
LeadManganeseMolybdateNickelNitrateNitriteOzone
pH valuePhenolsPhosphatePotassiumSilicaSpectr. Absorption CoefficientSulphate Vario
SulphideSulphiteSurfactantsTOCTurbidityZincUrea
Highlights
• Use of round vials and rectangular cells of different sizes without adapter
• 330 to 900 nm
• Interface RS232
• Large illuminated display
• Touch-sensitive film keypad with logical layout
• 35 user-specific methods
• Fast, easy lamp change
• Update via internet
A testing system is only as good as the quality of its indicator ® system. This is why Lovibond tablet reagents with a 5 or 10
year guaranteed shelf life are generally used for the standard
test methods. Each tablet is individually sealed in aluminium
foil and is therefore unaffected by ambient conditions. It
remains "fresh” right up to the time it is removed from the
foil, eliminating the possibility of indicator ageing.
Tablet Reagents
The chemicals are of crystalline white nature. If a reagent
(tablets or powder) is not white but has turned grey/brownish
or purple in colour, it has deteriorated. DPD liquid reagents
should be colourless when fresh and may turn brownish in
colour if the reagent has deteriorated. The use of deteriorated
products must be avoided as they will give false results.
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
ORDERING INFORMATION
ORDERING INFORMATION
Model Description
14 20 00 Lovibond® Comparator 2000+
DB 424 Plastic Cell, 13.5 mm path length, 10ml (Each)
17 10 10 Daylight 2000 Comparator
17 20 30 Nessleriser 2150 with stand, daylight unit and AF 306/P
17 21 50 Nessleriser 2150 with stand
17 20 40 Nessleriser 2250 with stand, daylight unit and DB 420
17 22 50 Nessleriser 2250 with stand
17 10 20 Daylight Unit for Nessleriser
35 30 60 AF 306 Pair Nessler tubes, 113 mm
35 30 80 AF 306/P Pair Nessler tubes, 113 mm with plungers
35 42 00 DB 420 Pair Nessler tubes, 250 mm with plungers
35 31 50 AF 315 Special Nessler tube (determination of oxygen with disc NOE)
Test Code Disc Disc Reading Range
Test Disc, Reagents & Accessories for Comparator System 2000+
Ammonia 28 31 10 NAA 1; 2; 3; 4; 5; 6; 8; 10 µg 1-10 µg NH3
28 31 20 NAB 10; 12; 14; 16; 18; 20; 22; 24; 26 µg 10-26 µg NH3
28 31 30 NAC 28; 32; 36; 40; 44; 48; 52; 56; 60 µg 28-60 µg NH3
28 31 40 NAD 60; 65; 70; 75; 80; 85; 90; 95; 100 µg 60-100 µg NH3
®
Lo
vib
on
dT
into
me
ter
Comparator& Nessleriser
Water Analysis
Disc
Comparator / Color Disc / Nessleriser
With its accessories, the Lovibond® Comparator system 2000+ is an extremely versatile, modular
system for testing water. It is simple to use yet is uncompromising in terms of precision and
reproducibility of results. It is compact and portable. The integrated prism brings the glass
standards of the test discs and the coloured sample into the same field of view.
Lovibond® Comparator 2000+ & Nessleriser System
The system for colorimetric water analysis
Highlights
• More than 400 different test discs available
• Compensation for coloured and turbid samples
• Guaranteed constancy of the coloured glass
standards
• Integrated prism
Discs for Water Analysis
Lovibond® Comparator System 2000+ & Nessleriser
Applications
• Water Treatment (e.g. Drinking Water)
• Pools
• Research Centres
• Universities
• Special Applications
• Laboratory and Field Testing
The system for colorimetric water analysis
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected]
ORDERING INFORMATION
ORDERING INFORMATION
Model Description
14 20 00 Lovibond® Comparator 2000+
DB 424 Plastic Cell, 13.5 mm path length, 10ml (Each)
17 10 10 Daylight 2000 Comparator
17 20 30 Nessleriser 2150 with stand, daylight unit and AF 306/P
17 21 50 Nessleriser 2150 with stand
17 20 40 Nessleriser 2250 with stand, daylight unit and DB 420
17 22 50 Nessleriser 2250 with stand
17 10 20 Daylight Unit for Nessleriser
35 30 60 AF 306 Pair Nessler tubes, 113 mm
35 30 80 AF 306/P Pair Nessler tubes, 113 mm with plungers
35 42 00 DB 420 Pair Nessler tubes, 250 mm with plungers
35 31 50 AF 315 Special Nessler tube (determination of oxygen with disc NOE)
Test Code Disc Disc Reading Range
Test Disc, Reagents & Accessories for Comparator System 2000+
Ammonia 28 31 10 NAA 1; 2; 3; 4; 5; 6; 8; 10 µg 1-10 µg NH3
28 31 20 NAB 10; 12; 14; 16; 18; 20; 22; 24; 26 µg 10-26 µg NH3
28 31 30 NAC 28; 32; 36; 40; 44; 48; 52; 56; 60 µg 28-60 µg NH3
28 31 40 NAD 60; 65; 70; 75; 80; 85; 90; 95; 100 µg 60-100 µg NH3
®
Lo
vib
on
dT
into
me
ter
Comparator& Nessleriser
Water Analysis
Disc
Comparator / Color Disc / Nessleriser
With its accessories, the Lovibond® Comparator system 2000+ is an extremely versatile, modular
system for testing water. It is simple to use yet is uncompromising in terms of precision and
reproducibility of results. It is compact and portable. The integrated prism brings the glass
standards of the test discs and the coloured sample into the same field of view.
Lovibond® Comparator 2000+ & Nessleriser System
The system for colorimetric water analysis
Highlights
• More than 400 different test discs available
• Compensation for coloured and turbid samples
• Guaranteed constancy of the coloured glass
standards
• Integrated prism
Discs for Water Analysis
Lovibond® Comparator System 2000+ & Nessleriser
Applications
• Water Treatment (e.g. Drinking Water)
• Pools
• Research Centres
• Universities
• Special Applications
• Laboratory and Field Testing
The system for colorimetric water analysis
Amkette Analytics Ltd., • Tel.: +91-22-6614 1500 • Fax: +91-22-6668 1600 • Email: [email protected] 105
®
Lo
vib
on
dT
into
me
ter
ORDERING INFORMATION
Test Code Disc Disc Reading Range
Test Disc, Reagents & Accessories for Comparator System 2000+
Chlorine 23 40 60 3/40E 0.02; 0.04; 0.06; 0.08; 0.1; 0.15; 0.2; 0.25; 0.3 mg/l 0.02-0.3 mg/l
free, 29 59 20 0.02; 0.04; 0.06; 0.08; 0.1; 0.2; 0.3; 0.4; 0.5 mg/l 0.02-0.5 mg/l
combined, 23 40 70 3/40F 0.2; 0.25; 0.3; 0.35; 0.4; 0.5; 0.6; 0.7; 0.8 mg/l 0.2-0.8 mg/l
total 23 40 30 3/40G 1.5; 1.8; 2.0; 2.3; 2.5; 2.7; 3.0; 3.2; 3.5 mg/l 1.5-3.5 mg/l
23 40 10 3/40A 0.1; 0.2; 0.3; 0.4; 0.5; 0.6; 0.7; 0.8; 1 mg/l 0.1-1.0 mg/l
23 41 10 3/40T 0.1; 0.2; 0.3; 0.4; 0.5; 0.6; 0.7; 0.8; 1 mg/l 0.1-1.0 mg/l
23 39 60 3/40N 1.1; 1.2; 1.3; 1.4; 1.5; 1.6; 1.7; 1.8; 2 mg/l 1.1-2.0 mg/l
23 41 40 3/40J 0.1; 0.2; 0.3; 0.4; 0.6; 0.8; 1; 1.5; 2 mg/l 0.1-2.0 mg/l
23 40 20 3/40B 0.2; 0.4; 0.6; 1; 1.5; 2; 2.5; 3; 4; mg/l 0.2-4.0 mg/l
23 39 30 3/40K 0.5; 1; 1.5; 2; 2.5; 3; 4; 5; 6 mg/l 0.5-6.0 mg/l
23 40 90 3/40S 1; 1.2; 1.4; 1.6; 1.8; 2; 2.5; 3; 4 mg/l 1.0-4.0 mg/l
23 39 20 3/40P 2; 2.3; 2.5; 2.7; 3; 3.2; 3.6; 4; 5 mg/l 2.0-5.0 mg/l
23 40 81 3/40HN 2; 3; 4; 5; 6; 7; 8; 9; 10 mg/l 2.0-10 mg/l
23 39 90 3/40CZ 0.5; 1; 1.5; 2; 4 mg/l Cl2 7; 7.4; 7.6; 8 pH; 0.5-4 mg/l Cl2, 7-8pH
23 20 10 3/2A 0.1; 0.2; 0.3; 0.4; 0.5; 0.6; 0.7; 0.8; 1 mg/l 0.1-1.0 mg/l
23 20 20 3/2AB 0.15; 0.25; 0.5; 0.75; 1; 1.25; 1.5; 1.75; 2 mg/l 0.15-2.0 mg/l
23 20 50 3/2APC 1; 1.5; 2; 2.5; 3; 3.5; 4; 4.5; 5 mg/l 1.0-5.0 mg/l
Chlorine free 28 34 50 NDPB 0.01; 0.02; 0.03; 0.04; 0.05; 0.06; 0.07; 0.08; 0.1 mg/l 0.01-0.1 mg/l
combined, 28 34 60 NDPC 0.02; 0.04; 0.06; 0.08; 0.1; 0.12; 0.14; 0.16; 0.2 mg/l 0.02-0.2 mg/l
total 28 34 40 NDP 0.05; 0.1; 0.15; 0.2; 0.25; 0.3; 0.35; 0.4; 0.5 mg/l 0.05-0.5 mg/l
28 34 70 NDPD 0.1; 0.2; 0.3; 0.4; 0.5; 0.6; 0.7; 0.8; 1 mg/l 0.1-1.0 mg/l
29 79 70 3/40ED 0.04; 0.08; 0.11; 0.15; 0.19; 0.28; 0.38; 0.48; 0.57 mg/l 0.04-0.57 mg/l
29 87 50 3/40FD 0.38; 0.48; 0.57; 0.66; 0.76; 0.95; 1.14; 1.33; 1.52 mg/l 0.38-1.52 mg/l
23 05 70 3/157 0.25; 0.5; 0.75; 1; 1.25; 1.5; 2; 3; 5 mg/l 0.25-5.0 mg/l
Chromium 23 59 00 3/59 10; 20; 30; 40; 50; 60; 70; 80; 100 µg 10-100 µg
Hardness total 23 10 70 4/38 0; 5; 10; 15; 20; 25; 30; 40; 60 mg/l CaCO3 0-60 mg/l
Hydrazine 28 37 00 NOH 0; 0.5; 1; 2; 3; 4; 6; 8; 10 µg 0-10 µg/l
Hydrogen 23 50 10 3/50 B 0.1; 0.2; 0.3; 0.4; 0.6; 1; 1.5; 2; 3 mg/l 0.1-3 mg/l
Peroxide 23 50 20 3/50 E 0.01; 0.02; 0.03; 0.04; 0.05; 0.07; 0.09; 0.12; 0.15 mg/l 0.01-0.15 mg/l
Ozone 23 67 00 3/67 0.1; 0.2; 0.3; 0.4; 0.5; 0.6; 0.7; 0.8; 1 mg/l 0.1-1.0 mg/l
23 67 10 3/67A 0.01; 0.02; 0.03; 0.04; 0.05; 0.06; 0.07; 0.08; 0.1 mg/l 0.01-0.1 mg/l
23 67 70 3/67S 0.05; 0.1; 0.15; 0.2; 0.25; 0.3; 0.35; 0.4; 0.45 mg/l 0.05-0.45 mg/l
23 04 40 3/148 0; 0.05; 0.1; 0.15; 0.2; 0.25; 0.3; 0.4; 0.5 mg/l 0-0.5 mg/l
pH 22 10 10 2/1A 1.2; 1.4; 1.6; 1.8; 2.0; 2.2; 2.4; 2.6; 2.8 1.2 - 2.8 pH
22 10 30 2/1B 2.8; 3; 3.2; 3.4; 3.6; 3.8; 4; 4.2; 4.4 2.8 - 4.4 pH
22 10 50 2/1C 3.6; 3.8; 4; 4.2; 4.4; 4.6; 4.8; 5; 5.2 3.6 - 5.2 pH
22 10 80 2/1E 4.4; 4.6; 4.8; 5; 5.2; 5.4; 5.6; 5.8; 6 4.4 - 6.0 pH
22 11 00 2/1G 5.2; 5.4; 5.6; 5.8; 6; 6.2; 6.4; 6.6; 6.8 5.2 - 6.8 pH
22 11 10 2/1H 6; 6.2; 6.4; 6.6; 6.8; 7; 7.2; 7.4; 7.6 6.0 - 7.6 pH
22 11 30 2/1J 6.8; 7; 7.2; 7.4; 7.6; 7.8; 8; 8.2; 8.4 6.8 - 8.4 pH
22 11 40 2/1K 7.2; 7.4; 7.6; 7.8; 8; 8.2; 8.4; 8.6; 8.8 7.2 - 8.8 pH
22 11 90 2/1L 8; 8.2; 8.4; 8.6; 8.8; 9; 9.2; 9.4; 9.6 8.0 - 9.6 pH
22 12 20 2/1P 4; 5; 6; 7; 8; 9; 9.4; 10; 11 4.0 - 11 pH
Phosphate 23 02 70 3/133 0; 0.25; 0.5; 1; 1.5; 2; 2.5; 3; 4 mg/l 0-4.0 mg/l PO4
23 03 10 3/136 0; 5; 10; 15; 20; 25; 30; 35; 40 mg/l 0 - 40mg/l PO4
28 39 50 NMD 10; 20; 30; 40; 50; 60; 70; 80; 100 µg 10-100 µg/l PO4
Silica 28 36 30 NN 1; 2; 4; 6; 8; 10; 12; 16; 20 mg/l 1.0-20mg/l SiO2
28 38 80 NV 0.2; 0.3; 0.4; 0.5; 0.6; 0.7; 0.8; 0.9; 1.0mg/l 0.2-1.0mg/l SiO2
Discs for Water Analysis
Lovibond® Comparator System 2000+ & Nessleriser