automation and network solutions ethernet/ip profile switch sales presentation
TRANSCRIPT
Automation and Network Solutions
EtherNet/IP Profile SwitchSales Presentation
Automation and Network Solutions
OpenRail One platform, one thousand possibilities
OpenRail One platform, one thousand possibilities
Automation and Network Solutions
Open Rail Overview
Managed switch family – available as RS (rail switch) or MS (modular switch)
Rail Switches available with 4, 8, 16 or 24 ports
• RS20 – all ports are 10/100mbps• RS30 – 2 additional gigabit ports
(total of 10, 18 or 26 ports)• RS40 – all gigabit ports
Modular Switches available with8, 16 or 24 ports
• MS20 – all ports are 10/100mbps• MS30 – adds 1 slot for 2 gigabit
ports (total of 10, 18 or 26 ports)• Many different media modules
available
Automation and Network Solutions
What is the EtherNet/IP Profile Switch?
A new firmware (version 3.0) puts EtherNet/IP functionality into all managed Open
Rail switches (RS20/30/40 and MS20/30)
Functionally, nothing in the switch changes – this is just an added feature
This allows users to integrate the switch directly into the RSLogix5000 I/O tree
This makes it much easier for customers to configure and monitor their managed
switches
Integrating this information into an HMI is easier than ever before
Generating network alarms becomes simple
All existing Open Rail switches can be flashed up to this firmware level (send an e-
mail to [email protected])
Nothing special to order – it’s embedded in every switch
Available in March
Sample files for RSLogix5000 and RSView Studio can be found at
http://samplecode.rockwellautomation.com(search Title – Hirschmann) or at
ftp.hirschmann-usa.com/EthernetIP
Automation and Network Solutions
Screenshot from RSLogix5000 sample
file
Hirschmann Add-On Instruction
(v16 required)
Switches in the I/O tree
Automation and Network Solutions
Screenshots from sample RSView Studio file
Main switch screen
Templates are available for
various switches
Diagnostics screen
Automation and Network Solutions
Switch information screen
IGMP Config screen
Port Enable/Disable
screen
Port information screen
Automation and Network Solutions
One more thing…
It’s free!
There is no additional cost for this functionality. If you buy the switch, it’s
there. If you already have a switch, just download and install the firmware.
Automation and Network Solutions
Available Resources
Sample files• http://samplecode.rockwellautomation.com (Search Title –
Hirschmann)• ftp.hirschmann-usa.com/EthernetIP
EtherNet/IP Step by Step presentation
Automation and Network Solutions
Additional Technical Information
3.1 release (June) will add support for MACH, PowerMICE and Octopus switch families
Other protocols are supported• ProfiNet at 3.0 release• ModBus TCP – future release
Sample files make use of the Add-On Instruction feature in RSLogix5000, which requires version 16
Version 16 is not required for the EtherNet/IP functionality to work – only to take advantage of our samples
Automation and Network Solutions
Another New Offering: -E Firmware
-E is ideal for customers who want some features of managed switches (IGMP Snooping, etc.) but don’t want to have to configure the switch
A switch with –E firmware has different factory default settings so that it can be installed in most EtherNet/IP applications with no configuration
Good for small, isolated networks All management features are still available, -E just changes
some factory defaults so management may not be required
Automation and Network Solutions
-E Settings
These settings are factory default for the –E firmware • IGMP Snooping – Enabled (version 2)• IGMP Querier Mode – Enabled• EtherNet/IP – Enabled• IP address via DHCP• Address Conflict Detection – On• Dip switches are physically set so that they are disabled (all
configuration done via software)• RSTP – Off• All TX ports set to Autonegotiate
***These are the settings that are changed from standard factory default***
Automation and Network Solutions
Questions???