Automation Drives and Controls

Motors | Automation | Energy | Transmission & Distribution | Coatings

www.weg.net

Drives and Controls2

Contactors and Overload Relaysg Complete line (9 to 800A / AC-3)g Quick mounting on 35mm DIN railg Direct mounting on overload relaysg Overload relays with phase failure sensitivity, according to IEC60947-4-1 g Standard, tripping class 10

Accessories and Spare Partsg Accessories for contactors from 9 to 800A (modular line)g Four-terminal coils up to 40A g Coils available in AC and DC voltageg Spare parts for the whole line (Ex.: contact set)

Mini-Contactor CWC g AC-3 operation up to 22Ag Mini-contactor CWC07 to CWC016 AC and DC coil with the same dimensionsg Allows operation under the AC-4 dutyg Low-consumption DC coil g Spring terminals CWC0S series

Easy Connectiong Star-delta wiring kits up to 45kW @ 230/240V and 90kW at 400/415Vg Reversing wiring kits up to 22kW @ 230/240V and 45kW at 400/415V

www.weg.net

Drives and Controls 3

Pushbuttons and Pilot LightsgModern and easy to useg Pilot Light blocks with integrated LEDg Designed according to IEC/EN60974-5-1g Degree of protection IP66g Contacts blocks and flanges with quick and easy mounting

system

Enclosed Starters g Three-phase and single-phase DOL starters up to 450kW @ 400V / 50Hz and 600HP @ 480V / 60Hz g Star-Delta starters up to 800kW @ 400V / 50Hz and 1250HP @ 480V / 60Hzg Reverser starters up to 355kW @ 400V / 50Hz and 500HP @

480V / 60Hzg Thermoplastic and metallic enclosureg IEC and UL versions

Timers and Electronic Monitoring Relays g RTW timers up to 150 hours with 9 temporization functionsg RPW electronic monitoring relays for functions: phase loss,

phase sequence, phase loss and sequence, undervoltage and overvoltage and temperature monitoring with PTC sensor

g RNW level relays – for filling or draining functions

www.weg.net

Drives and Controls4

Motor Protective Circuit-Breaker MPW g Compact solution for electric circuit protection, motor starting/protection up to 45kW @ 400/415Vg Adjustable thermal tripping for motor overload protection with phase failure- sensitivity, according to IEC 60947-4-1, with tripping class 10g Magnetic tripping (protection against short-circuit) fixed at 13xlng High short-circuit breaking capacity

Terminal Blocks

Screw Connection - BTWP Line g Complete line from 2.5 to 240mm2

g Cable inputs in the shape of a cone to facilitate insertiong Built in protection against screw looseningg Wide range of accessories

Spring Connection - BTWM Lineg 2.5 to 10mm2 lineg Stainless steel springg Uniform contact pressureg Wide range of accessories

Smart Relay SRW01g PLC modeg USB communicationg Several protection, monitoring and operating modesg Programmable via WLP software or HMIg ProfiBus, ModBus or DeviceNet communication via

exchangable communication modulesg 4 digital inputs and 4 digital outputsg Digital expansion unit: 6 digital inputs and 4 digital outputsg Current Measurement Units from 0.25 A up to 840 Ag Earth Leakage Sensor for earth leakage protection

Air Circuit-Breakers ABWSwitching and protection for electrical circuits

gComplete solution for high power circuit protectiongRated currents up to 6300AgAvailable in fixed and withdrawable versionsgHigh short circuit breaking capacitiesgElectronic type protection relaysgComplete line of accessories

www.weg.net

Drives and Controls 5

CFW10gPower rating: 0.25 to 5HP (0.18 to 3.7kW)g Power supply: 110…127V and 200…240Vg Rated output voltage: 200…240Vg Single and three phase power supplyg Sinusoidal PWM modulation - Space Vector Modulation g EMC filters (built-in)g Latest generation IGBT modules and electronic circuits with SMD componentsg DSP controlg Compact dimensions, simplified installation and operationg Speed adjustment via potentiometer is available

CFW08gPower rating: 0.25 to 20HP (0.18 to 15kW)g Power supply: 200…240V and 380…480V g V/Hz (scalar) or sensorless vector controlg Sinusoidal PWM modulation g Space Vector Modulationg EMC filters (built-in)g Modbus RTU communication (built-in), CANopen, DeviceNet and Profibus-DP (optional)g PID regulatorg DSP controlg Remote Human Machine Interface (HMI) g IP66 version (wash duty)

WEG VFDS incorporate the most advanced world wide technology for speed variation.

CFW09gPower rating: 1.5 to 500HP (1.1 to 355kW)g Power supply: 200…240V, 380…480V and 500…600/690Vg V/Hz (Scalar), sensorless vector or closed loop vector controlg Optimal brakingg Dymanic brake (optional)g Regenerative converter (optional)g EMC filters (optional)g Fieldbus communication: Profibus-DP (optional), DeviceNet (optional), Device Net Drive Profile (optional), METASYS N2 Johnson Controls (optional) and Modbus RTU (built-in)g IP20 enclosure up to 500HP (315kW)g PLC and positioning control functions boardg Optimal flux function - a unique solution providing rated torque at low speeds without forced ventilation or motor oversizing.

Variable Frequency Drives

CFW08

CFW09

CFW10

CFW08 Wash NEMA4X (IP56)

Potentiometer version Certification

www.weg.net

Drives and Controls6

Variable Frequency Drives

CFW11gPower rating: 1 to 600HP (0.75 to 450kW) g Power supply: 200-240V and 380-480Vg Human-machine interface (HMI) with backlight, graphic display

and soft-keys, and real time clockg Plug-and-play philosophyg USB connectiong Memory Card built-ing Great variety of control accessories: I/O expansion boards (digital and analog) Incremental encoder interface and communicationg PLC and Positioning function boardg Communication: Profibus, DeviceNet, CANopen, EtherNet / IP, Modbus RTU

(optional) and Profinetg Intelligent thermal managementg Protections with failure and alarm warningsg Normal duty and heavy duty ratings to adapt optimally to all

kinds of load g IP20 enclosureg IP21 (NEMA1) and IP54 (option) CFW11

CFW700gPower rating: 1.5 to 150HP (0.75 to 132kW)gPower Supply: 200-240V and 380-480VgLCD Display with backlight and soft-keysgPlug and Play accessoriesgMemory card (Optional)gEncoder Interface built-in (Incremental tyoe required)gRS-485 port available through terminals (MODBUS ready)gCommunication modules Profibus DP-01 and CANopen gSoft PLC function allows for ladder programming developmentgSmart motor and drive thermal managementgNormal and Heavy Duty ratings (ND/HD)gDC choke built-tin (no requirement for minimum power supply

impedance)

CFW700

Certification

www.weg.net

Drives and Controls 7

SSW05gPower rating: 0.75 to 75 HP (0.55 to 55kW)g Power supply: 220...575V and 575...690Vg Built-in by-passg DSP controlg Remote keypad (optional)g Built-in motor protectionsg PID regulatorg DSP controlg Ambient Temperature up to 55ºC (131ºF)

SSW06gPower rating: 30 to 2650 HP (22 to 1950kW)g Power supply: 220...575V and 575...690Vg Built-in by-passg Removable HMI with LED and LCD displayg Kick-Start function for loads with high inertiag Pump control for intelligent pumping system controlg Full digital / 32 bits RISC microcontrollerg Eletronic motor protectiong Ambient temperature up to 55ºC (131ºF)

SSW07 and SSW08gPower ratings: 6 to 450 HP (4.5 to 315kW) g Voltage: 220...575V g Built-in Bypass g Built-in EMC filter g SSW07 applied for Heavy load startsg SSW08 applied for Light and moderate load startsg Three-phase controlled g Integral motor and starter protections g Programmable KICK-START function to start high break-away torque loads g Remote HMIg Very compact product g It is able to operate in 55ºC without derating

WEG soft-starters, microprocessor controlled and fully digital, have been designed to provide high performance in starting and stopping electric motors. The keypad offers a friendly interface for parameter adjustment making the operation much easier.

Soft-Starters

Certification

www.weg.net

Drives and Controls8

In a three-phase network, three measurements summarize the electrical installation, in a simplified way:gActive power: kW (generates work)gReactive power: kVAr (creates a magnetic field)gApparent power: kVA (total power consumed)

power factor energy efficiency factor

The more kvar that circulates through the network and transformer/generator, the greater the consumed kVA value and the lower the power factor.

WEG Capacitors for Power Factor Correction

g Self-healing metalized polypropylene film gInternal over pressure security device gMaximum allowed fault current of 10kAg Dielectric losses smaller than 0.4W/kVArg Internal discharge resistors in three-phase units, modules and banksgDesigned in accordance with standards IEC 60831-1/2 and UL810

FP = kW = cosϕ kVA

Power Factor Correction

Disconnection section

Expansible area

Normal Expanded

max

www.weg.net

Drives and Controls 9

UCW(Single-phase Capacitors)g Rated power up to 6.67 kVAr in 380/440/480Vacg Capacitive units for mounting of capacitors banks

Contactors for Capacitor Switchingg Available for the switching of capacitors up to 50kVAr/400/415Vg Same accessories used with CWM contactors lineg Integrated pre-charge resistors with early-make contacts block

MCW (Three-phase capacitors module)g Rated power up to 15 kVAr in 380/440/480Vac g Up to 60 kVAr with 4 modules in

parallelg Single-phase capacitors UCW connected in deltag Equipped with discharge resistors (30s, 1/10Un)

UCWT (Three-phase capacitive unit)g Ideal for local/individual motor correction: 0.5 a 15 kVAr at 220Vac 0.5 a 25 kVAr at 380/440/480Vacg Internally built-in discharge resistorsg Protection cover for connectionsg Fast-on and Philips type terminals

BCW and BCWP (Three-phase capacitors bank)g Rated power up to 75 kVAr in 380/ 440/480Vacg Three-phase capacitors bank BCW composed by capacitive cells assembled in metallic enclosure with degree of protection IP32 and used for power factor correction of duty loads.g Equipped with discharge resistors (30s, 1/10 Un) and terminal blocks for power source.gBCW-P is composed basically by capacitors UCW, CWMC contactors for switching capacitive loads, electronic timer relay RTW-RE to avoid resetting of capacitors on load and moulded case circuit breaker or fuse delay for short circuit protection.

AC Film Capacitors Motor Run and Lighting ApplicationsgCMRW line for motor run applications(IEC 60252-1)gCILW and CLAW for lighting applications (IEC 61048)gHigh confiabilityg Self-Healing propertiesg Low dissipation factorg Reduced sized

Power Factor Correction

www.weg.net

Drives and Controls10

Servo drives SCA05g Rated current: 4, 8, 24 and 30AgTorque / speed / positioning modegEncoder simulator: 1 to 4096 pulses per revolutiongSpeed Analog Reference (14 bits)gBuilt-in CANopen, Modbus and Devicenet networksgProfibus DP (optional)gHigh perfomance RISC 32 bit microcontrollergBuilt-in RS 232 Serial Communication or optional RS 485gAutomatic cycle with 10 positioning programmed via parametergOptional remote interface

Servomotorsg Torque: 1.6 up to 50 NmgIP 65 protection degreegBrushlessgResolver feedbackgLow inertiagLow maintenancegLow level of noise and vibration

Softwares for product specificationsSDW – special tool to help on WEG softstarters specifications main features and advantages:

g SDW uses the WEG motors data bank to help the filling of the formsgSDW has the basic thechnick characteristics of the main applications (curve, datas, etc)gSDW allows the specification of softstarters considering several starting conditions and presenting the results with softstarter model and parameter list to its start up

Automation Systems

Certification

www.weg.net

Drives and Controls 11

Low Voltage VFDs from 0.18 to 1100 kW

Soft-Starters from 0.5 to1950 kW

MV Frequency Drives from 400 up to 3312 kW

Modular Drivefrom 315 to 2500 kW

AC Servomotors and Servodrives 1.6 to 50 Nm

LV Distribution Panels

Pushbuttons and Pilot Lights

Capacitors for Power Factor Correction

Contactors and Overload Relays

DOL Starters

Timers and Electronic Monitoring Relays

Motor Protective Circuit Breaker

Automation Systems

WEG Worldwide OperationsARGENTINAWEG EQUIPAMIENTOS ELECTRICOS S.A.(Headquarters San Francisco-Cordoba)Sgo. Pampiglione 4849Parque Industrial San Francisco2400 - San FranciscoPhone: +54 (3564) 421484Fax: +54 (3564) 421459info-ar@weg.netwww.weg.net/ar

AUSTRALIAWEG AUSTRALIA PTY. LTD.3 Dalmore DriveCarribean Park Industrial EstateScoresby VIC 3179 - MelbournePhone: 61 (3) 9765 4600Fax: 61 (3) 9753 2088info-au@weg.netwww.weg.net/au

BELGIUM WEG BENELUX S.A.Rue de l’Industrie 30 D, 1400 NivellesPhone: + 32 (67) 88-8420Fax: + 32 (67) 84-1748 info-be@weg.netwww.weg.net/be

CHILEWEG CHILE S.A.Los Canteros 8600 La Reina - SantiagoPhone: (56-2) 784 8900Fax: (56-2) 784 8950info-cl@weg.netwww.weg.net/cl

CHINAWEG (NANTONG) ELECTRIC MOTOR MANUFACTURING CO., LTD.No. 128# - Xinkai South Road,Nantong Economic & Technical Development Zone, Nantong, Jiangsu Province. Phone: (86) 0513-85989333Fax: (86) 0513-85922161info-cn@weg.netwww.weg.net/cn

COLOMBIAWEG COLOMBIA LTDACalle 46A N82 - 54Portería II - Bodega 7 - San Cayetano II - BogotáPhone: (57 1) 416 0166Fax: (57 1) 416 2077info-co@weg.netwww.weg.net/co

DENMARKWEG SCANDINAVIA DENMARKSales Office of WEG Scandinavia ABAnelysparken 43BTrue8381 Tilst – DenmarkPhone: +45 86 24 22 00 Fax : +45 86 24 56 88info-se@weg.netwww.weg.net/se

FRANCEWEG FRANCE SASZI de Chenes – Le Loup13 Rue du Morellon – BP 73838297 Saint Quentin FallavierPhone: +33 (0) 4 74 99 11 35Fax: +33 (0) 4 74 99 11 44info-fr@weg.netwww.weg.net/fr

GERMANYWEG GERMANY GmbHIndustriegebiet Türnich 3Geigerstraße 750169 Kerpen-TürnichPhone: +49 (0)2237/9291-0Fax: +49 (0)2237/9292-200info-de@weg.netwww.weg.net/de

GHANAZEST ELECTRIC GHANA LIMITED - WEG Group15, Third Close Street Airport Residential Area, Accra PMB CT 175, CantonmentsPhone: 233 30 27 664 90Fax: 233 30 27 664 93info@zestghana.com.ghwww.zestghana.com.gh

INDIAWEG ELECTRIC (INDIA) PVT. LTD.#38, Ground Floor, 1st Main Road, Lower Palace Orchards,Bangalore – 560 003Phone(s): +91-80-4128 2007 +91-80-4128 2006 Fax: +91-80-2336 7624 info-in@weg.netwww.weg.net/in

ITALYWEG ITALIA S.R.L.V.le Brianza 20 - 20092 - Cinisello Balsamo - MilanoPhone: (39) 02 6129-3535Fax: (39) 02 6601-3738info-it@weg.netwww.weg.net/it

JAPANWEG ELECTRIC MOTORSJAPAN CO., LTD.Yokohama Sky Building 20F, 2-19-12 Takashima, Nishi-ku, Yokohama City,Kanagawa, Japan 220-001Phone: (81) 45 440 6063info-jp@weg.netwww.weg.net/jp

MEXICOWEG MEXICO, S.A. DE C.V.Carretera Jorobas-Tula Km. 3.5, Manzana 5, Lote 1 Fraccionamiento Parque Industrial - Huehuetoca, Estado de México - C.P. 54680Phone: + 52 (55) 5321 4275Fax: + 52 (55) 5321 4262info-mx@weg.netwww.weg.net/mx

NETHERLANDSWEG NETHERLANDS Sales Office of WEG Benelux S.A.Hanzepoort 23C 7575 DB OldenzaalPhone: +31 (0) 541-571080Fax: +31 (0) 541-571090info-nl@weg.netwww.weg.net/nl

PORTUGALWEG EURO - INDÚSTRIA ELÉCTRICA, S.A.Rua Eng. Frederico UlrichApartado 6074 4476-908 - MaiaPhone: +351 229 477 705Fax: +351 229 477 792info-pt@weg.netwww.weg.net/pt

RUSSIAWEG RUSSIA Russia, 194292, St. Petersburg, Prospekt Kultury 44, Office 419 Phone: +7(812)363-21-72 Fax: +7(812)363-21-73info-ru@weg.net www.weg.net/ru

SOUTH AFRICAZEST ELECTRIC MOTORS (PTY) LTD. WEG Group47 Galaxy Avenue, Linbro Business Park - Gauteng Private Bag X10011 - Sandton, 2146 JohannesburgPhone: (27-11) 723-6000Fax: (27-11) 723-6001info@zest.co.zawww.zest.co.za

SPAINWEG IBERIA S.L. Avenida de la Industria,2528823 Coslada - MadridPhone: (34) 916 553 008Fax : (34) 916 553 058info-es@weg.netwww.weg.net/es

SINGAPOREWEG SINGAPORE PTE LTD159, Kampong Ampat, #06-02A KA PLACE. Singapore 368328.Phone: +65 6858 9081Fax: +65 6858 1081info-sg@weg.netwww.weg.net/sg

SWEDENWEG SCANDINAVIA ABBox 10196Verkstadgatan 9434 22 KungsbackaPhone: (46) 300 73400Fax: (46) 300 70264info-se@weg.netwww.weg.net/se

UKWEG ELECTRIC MOTORS (U.K.) LTD.28/29 Walkers RoadManorside Industrial EstateNorth Moons Moat - RedditchWorcestershire B98 9HEPhone: 44 (0)1527 596-748Fax: 44 (0)1527 591-133info-uk@weg.netwww.weg.net/uk

UNITED ARAB EMIRATESWEG MIDDLE EAST FZEJAFZA – JEBEL ALI FREE ZONETower 18, 19th Floor, Office LB 18 1905P.O. Box 262508 - DubaiPhone: +971 (4) 8130800 Fax: +971 (4) 8130811info-ae@weg.netwww.weg.net/ae

USAWEG ELECTRIC CORP. 6655 Sugarloaf Parkway, Duluth, GA 30097 Phone: 1-678-249-2000Fax: 1-770-338-1632info-us@weg.net www.weg.net/us

VENEZUELAWEG INDUSTRIAS VENEZUELA C.A.Avenida 138-AEdificio Torre Banco Occidental de Descuento, Piso 6 Oficina 6-12Urbanizacion San Jose de TarbesZona Postal 2001Valencia, Edo. CaraboboPhone(s): (58) 241 8210582 (58) 241 8210799 (58) 241 8211457Fax: (58) 241 8210966info-ve@weg.netwww.weg.net/ve

Cod

: 50

0190

85 |

Rev

: 07

| Dat

e (m

/y):

03/2

011

The

valu

es s

how

n ar

e su

bje

ct to

cha

nge

with

out p

rior

notic

e.

WEG Equipamentos Elétricos S.A.International Division Av. Prefeito Waldemar Grubba, 3000 89256-900 - Jaraguá do Sul - SC - Brazil Phone: 55 (47) 3276-4002 Fax: 55 (47) 3276-4060 www.weg.net