automotive full line catalog
DESCRIPTION
ÂTRANSCRIPT
L10 Series LED Beacons...Page 4.......
R316/R416 Rota-Beam™ Beacons...Page 4.......
ION™ Lightheads...Page 5 & 6..................
SideKick™ ...Page 6...............................
V-Series™...Page 6.......................................
3-1/2" Round...Page 7...........
6" Round Compartment Light...Page 8......
3" Round Compartment Light...Page 8.......
8" Round Interior Light...Page 8...........
M2 Series Wide Angle Lighthead...Page 9....
OR Round Series Light...Page 10............
B/T/T Lightheads...Pages 10-11.......
Vertex Competitor™ Lighthead...Page 12...........
ION™ Mirror Beam™...Page 12..........
Pioneer™ Lights & Poles...Page 13......
PAR-46 Spotlight/Floodlights...Page 14................
Pan & Tilt™ spotlight...Page 15............
Perimeter Enhancement Light™...Page 15..
Legacy™ Lightbars...Page 17..............
Liberty™ TRIO™ Lightbars...Page 19.......
Century Elite™ Lightbars...Page 21...........
Towman's™ Century™ Lightbar...Page 22..........
Mini Century™ Lightbars...Page 23...............
DUO™ Responder®...Page 24.......................
Inner Edge® XLP ...Page 25....................
295SDA1 Siren Controller...Page 28.........
ALPHASL Siren Amplifier...Page 30..............
CenCom Sapphire™ Page 31.....
CanTrol WC™...Page 32........................................
PCC6W1/PCC10W1 Switch Control...Page 34....
PCCSR9W Power Control...Page 34....
LINZ6™ Wing Plow™ Light...Page 35......
2
BEACONS
LIGHTHEADS
POWER SUPPLIES & FLASHERS
LIGHTBARS
SIRENS, SPEAKERS & CONTROLS
LIGHTING & ELECTRONIC SIREN
SYSTEMS
BACKUP ALARMS
TRAFFIC ADVISORS
TABLE OF CONTENTS
Strobe Beacons . . . . . . . . . . . . . . . . . . . . . . 3Rotating Beacons. . . . . . . . . . . . . . . . . . . . . 3Super-LED® Beacons . . . . . . . . . . . . . . . . . . 4 Dash and Deck Lighting . . . . . . . . . . . . . . . . 5
Directional . . . . . . . . . . . . . . . . . . . . . . .6-11Special Application . . . . . . . . . . . . . . . . . . 12 Work Lights. . . . . . . . . . . . . . . . . . . . . . 13-15
Power Supplies . . . . . . . . . . . . . . . . . . . . . 15Halogen & LED Flashers . . . . . . . . . . . 16 & 38
Backup Alarms . . . . . . . . . . . . . . . . . . . . . 16
Legacy™ Series . . . . . . . . . . . . . . . . . . . . . 17 Liberty™ Series . . . . . . . . . . . . . . . . . . . 18-19Freedom™ . . . . . . . . . . . . . . . . . . . . . . . . . 20Justice® & Century Elite™ . . . . . . . . . . . . . . 21Outer Edge® & Towman's™ . . . . . . . . . . . . . 22Mini Lightbars . . . . . . . . . . . . . . . . . . . . 23-24Inner Edge® Series. . . . . . . . . . . . . . . . . . . 25
Traffic Advisors™ . . . . . . . . . . . . . . . . . . 26-27
Siren Amplifiers. . . . . . . . . . . . . . . . . . . 28-33Speakers . . . . . . . . . . . . . . . . . . . . . . . . . 33 Power Control Centers & Switches . . . . . . . . 34
Motorcycle Products. . . . . . . . . . . . . . . . . . 35Snow Plow Lighting . . . . . . . . . . . . . . . . . . 35DOT3® Super-LED Systems . . . . . . . . . . . . . 36NFPA Packages for Fire & Rescue . . . . . . . . 37Ambulance Systems . . . . . . . . . . . . . . . . . . 38
Whelen Capabilities . . . . . . . . . . . . . . . . 39-42
SmartSmart®
Look for the SmartLED® logo for lightheads that do not need an external flasher.
Look for the Made To Order logo
for special order products.
Look for the motorcycle rider logo for products
suitable for a motorcycle.
For over fifty years Whelen has proudly designed and manufactured emergency warning products in America. Now we are pleased to be the title sponsor of one of the great All-American sports, the NASCAR® Whelen Modified Tour, the NASCAR Whelen Southern Modified Tour and now the recently added NASCAR Whelen All-American Series. This is our way of saluting not only the legends of NASCAR but also the dedicated professionals, Fire and EMS, Law Enforcement and Rescue Personnel that are every day heroes for us all.
Our goal is to make your job safer with the most reliable and effective warning equipment available. As the Officially Licensed Warning Lights of NASCAR, we hope you'll enjoy our lights on pace cars and racetrack equipment at tracks around the country.
For news and racing schedules, visit our web site and click on "Motorsports."
In this Catalog
®
COMPANY
S360D Super Strobe® - Class 1Class 1 and California Title XIII Certified in Amber and Blue. Class 2 Certified in Red and Clear. Highest effective light intensity in its class. 30 watts output power. Smooth outer self-cleaning dome with patented component optics. Includes Cross-Link™ Strobe Synchronization capability. Connect up to four independent S360D strobes to work as one system. Permanent/pipe mount standard. Branch guard model available.Size: 6-1/2” (165mm) H x 7-1/2” (91mm) Dia. Weight: 3 lbs., 5 oz. (1.5kg)
1500 Series Strobe BeaconsClass 2, SAE Certified in Amber in 12/24 VDC is available in all safety colors with twist off domes and full reverse polarity protection. Magnetic mount versions feature 8’ coiled cord with cigar plug and LED “On” indicator.Size: 3-3/4” (95mm) H x 5” (127mm) Dia.
2022 Series Strobe Beacons - Class 1SAE Class 1 Certified in Amber and Clear. 32 watts input, 22 watts output with 13 joules light output. 72 Quintflash™ default flash pattern, three other built in patterns available. Reverse polarity protected. Polycarbonate base. 12/24 VDC. Manual Hi/Low control on all models, except for model 2022AP which has auto Hi/Low. High or low dome. Permanent, magnetic and magnetic/suction mount. Magnetic versions are supplied with 8' cord and cigar plug. Optional magnetic kit, high and low dome branch guard, lighted switch kit, dust cover for high dome, mirror mount bracket and shelf bracket mount. Two year warranty on power supply, six months on flash tube. Size, High Dome: 6-1/2” (165mm) H x 6-3/8” (161mm) Dia. Low Dome: 5” (127mm) H x 6-3/8” (161mm) Dia.
2015 Series Strobe Beacons - Class 2Similar to 2022 beacon (above) except: SAE Class 2 Certified in all colors. 22 watts input, 15 watts output with 13 joules light output.
1200D - Class 1Class 1 and California Title XIII Certified in Amber. Class 2 Certified in Red, Blue and Clear. Aerodynamic, high profile, self-cleaning dome. 25 watts output power. Double fresnel optic dome. Polished aluminum base with combination permanent/pipe mount. Size: 8-1/2” (216mm) H x 7” (178mm) Dia. Weight: 3 lbs., 5 oz. (1.5kg)
800D - Class 1Class 1 Certified in Amber.Class 2 Certified in Red, Blue and Clear. 25 watts output power. Double fresnel optic lens available in two dome heights. Magnetic mount supplied with 8' straight cord and cigar plug. Optional magnetic mount kit and branch guard for low dome only.Size (High Dome): 6” (152mm) H x 5-1/2” (140mm) Dia. Size (Low Dome): 4-1/2” (114mm) H x 5-1/2” (140mm) Dia. Weight: 2 lbs., 4 oz. (1kg)
3
Professional Series Strobe Beacons! Remote Hi/Low intensity operation.! Certified to SAE and California Title XIII requirements.! Dual voltage 12/24 VDC operation. ! Reverse polarity protection. Patented clamp circuit prevents power supply damage in the event of flash tube failure.! Circuit boards are double epoxy dipped for added vibration
and moisture resistance.! Fully enclosed cast aluminum bases offers permanent, 1" NPT
pipe and spade bolt mounting.! Exclusive, five year HDP® Heavy-Duty Professional warranty
on power supply and two year warranty on Gold Medallion flash tube.
®PROFESSIONAL
HEAVY DUTY
STROBE BEACONSBuilt for heavy-duty use, and reliable operation.
1510MA
®
S360DAB S360DBP
800DLAM 800DHRP
800DHBP
1200DHAP
1200DHRP
NOTE: The use of a magnetic mounted beacon on the roof of a vehicle in motion is not recommended, and is at the sole discretion and risk of the user.
B6TM and B6MM SeriesCombination 360° warning and directional lighting in a single polished cast aluminum housing. Lower level 700 Series Linear-LED Super-LED lighthead in a choice of warning, in Amber, Red and Blue, brake/tail/turn and scenelight. B6T models have Rota-Beam, RB6T rotating 360° warning beacon in upper section, B6M has L31 Super-LED beacon.Size: 8-5/8” (219mm) H x 7-13/16” (198mm) W x 8-1/2”(215mm) D. Weight: 3 lbs., 13 ozs. (1.7kg)
Rotating Beacons in two sizes.ROTATING BEACONS
B6TMRR1P
B6MMRAP
Rota-Beam™ Mid-size rotating beacon with single reflector, snap-in style 50 watt halogen lamp, or dual reflector 50 watt halogen. Certified to SAE and California Title XIII requirements. Non-corroding glass filled nylon bases for combination flat or 1” NPT pipe mounting. Optional magnet mount kits. Rotator assembly has precision double ball bearing design and steel base plate for optimum shock mounting and durability. Three year warranty on motor assembly.Size: 6-1/2” (165mm) H x 7-3/8” (187mm) Dia.Weight: 1 lb., 5 oz. (.55kg).
RB6TRP
RB6PAP
2022HPA 2015LPA
L31 - Class 1 Super-LED performance, Certified to meet California Title XIII. Permanent mount includes multiple built-in Scan-Lock™ flash patterns, steady-burn plus 4 simulated rotating patterns. Alternately or simultaneously flash multiple patterns. Synchronize up to eight L31 beacons. Hi/Low intensity, cruise lights, standard. Magnetic and magnetic/suction mounts have 75 SignalAlert™ flash pattern only and supplied with 10' straight cord and cigar plug with LED indicator On/Off switch. Optional branch guard, pipe mount kits, mirror mount and shelf mount brackets. 12 VDC, optional 24 VDC. Size: 4” (102mm) H x 7-3/16” (182mm) Dia.
L32 - Class 1 (Amber & Blue) Class 2 (other colors) Compact Super-LED permanent mount beacon includes multiple built-in Scan-Lock flash patterns, steady-burn plus 4 simulated rotating patterns. Alternately or simultaneously flash multiple patterns. Synchronize up to eight L32 beacons. Magnetic and magnetic/suction mounts have 75 SignalAlert flash pattern only and supplied with 10' straight cord and cigar plug with LED indicator On/Off switch. Optional pipe mount kit, mirror mount and shelf mount brackets. 12 VDC, optional 24 VDC. Size: 2-1/2” (64mm) H x 7-3/16” (182mm) Dia.
All LED beacons offer 5 year warranty.360° SUPER-LED ® BEACONS
4
L51 - Class 1 L52 - Class 2 L53 - Class 3 Compact 360° Super-LED beacon with twist off dome. 12 VDC. 75 SignalAlert FPM. Polycarbonate base with permanent/pipe, magnetic mount and optional mirror mount brackets. L51 & L52 are encapsu-lated and available in Amber or White. L53 is available in Amber. Magnetic mount supplied with 10' straight cord and cigar plug with LED indicator On/Off switch. Size: 3-3/4” (95mm) H x 5” (127mm) Dia.
L40 - Class 1 & CA Title XIIIL41 - Class 1 Medium profile 360° Super-LED beacon with encapsulated electronics. 12/24 VDC. 75 SignalAlert FPM default pattern, multiple select-able patterns. Cast aluminum, powder coated base with permanent/pipe/J-Hook mount, mag-netic mount, magnetic/suction and optional mir-ror mount brackets. Permanent mount has Hi/Low and Synchronization feature. Available in Red, Blue, Amber or White. Magnetic mount supplied with 10' straight cord and cigar plug with LED indicator On/Off switch and pattern selection switch. Size: 4-7/8” (121mm) H x 6-7/8” (163mm) Dia.
L10 - Class 1SAE Class 1 Certified in Amber.Economically priced Super-LED Beacon. 12 and 24 VDC models. 75 SignalAlert flash pat-tern. Virtually no EMI radiation. Polycarbonate base with permanent/pipe/J-Hook mount, magnetic mount, magnetic/suction models. Optional mirror mount brackets and branch guard available. Available in Amber, for other colors contact factory. Magnetic mount sup-plied with 8' cord and cigar plug, 10' straight cord and cigar plug with LED indicator On/Off switch plus pattern control switch. Size, High Dome: 6-13/16” (172mm) H x 6-7/16” (163mm) Dia.Low Dome: 5-5/16” (134mm) H x 6-7/16” (163mm) Dia.
Rota-Beam™ R316 - Class 1SAE Class 1 Certified.Solid-state, polycarbonate base, Super-LED rotating beacon with no moving parts of motors. Multiple rotating flash patterns. Low profile, smooth self-cleaning outer dome. Conformal coated electronics. Low current draw. Single or split models. Cruise light. Synchronizable with other Whelen beacons. Models in permanent, magnetic and magnetic/suction mounts. Magnet and magnetic/suction mount models supplied with a ten foot straight cord, cigar plug with LED indicator On/Off switch and pattern selection switch. 12 or 24 VDC versions available. Size: 4” (102mm) H x 7-3/16” (182mm) Dia.
Rota-Beam™ R416 - Class 1SAE Class 1 Certified.Solid-state, cast aluminum base, Super-LED rotating beacon with no moving parts of motors. Multiple rotating flash patterns. Medium profile, smooth self-cleaning outer dome. Conformal coated electronics. Low current draw. Single or split models. Cruise light. Synchronizable with other Whelen bea-cons. Models in permanent, magnetic and magnetic/suction mounts. Magnet and mag-netic/suction mount models supplied with a ten foot straight cord, cigar plug with LED indicator On/Off switch and pattern selection switch. 12 or 24 VDC versions available. Size: 4-7/8” (123mm) H x 6-7/16” (163mm) Dia.
L21 - Class 1L22 - Class 2 Encapsulated Beacons. Virtually no EMI radiation. Combination mount (permanent, pipe and J-hook), magnetic and magnetic/suction mounts available. High & low domes available. Combination mount has multiple Scan-Lock flash patterns, syn-chronization capability and is available with photocell Hi/Low, contact factory. 12 & 24 VDC models. Optional magnetic kit, branch guard for high and low dome, mirror mount and shelf mount brackets and lighted switch kit mounted on bracket. Available in Amber, Red, Blue & White.L21 Models: Class 1. Polycarbonate and cast aluminum base models. Magnetic and magnetic/suction mount supplied with 10' straight cord and cigar plug with LED indicator On/Off switch plus pattern control switch.L22 Models: Class 2. Polycarbonate base. Magnetic and mag-netic/suction mount models have 75 SignalAlert default pat-tern only and does not include synchronization or pattern con-trol capabilities. Supplied with 10' straight cord and cigar plug with LED indicator On/Off switch plus pattern control switch. Size, High Dome: 6-1/2” (165mm) H x 6-3/8” (161mm) Dia.Low Dome: 5” (125mm) H x 6-3/8” (161mm) Dia.
®
L32LAF
L53AM
L10HAP
L10LAP
L22HAP
L31HAF
L360BGB
NOTE: The use of a magnetic mounted beacon on the roof of a vehicle in motion is not recommended, and is at the sole discretion and risk of the user.
L40BP
R416AF
R316BF
L41RM
Avenger™ SeriesLinear Super-LED lamps with their small size and clear outer lens makes it barely detectable until powered on. Single, dual or split mod-ules. Multiple Scan-Lock flash patterns. Swivel/bail bracket with 3 suction cups, and snap-on polycarbonate hood. Optional low profile mounting brackets, visor mounting bracket and adjustable height bracket kit.AVN Models: 8' cord with cigar plug On/Off switch and Scan-Lock pattern switch.AVNS Synchronized Models: Scan-Lock flash patterns have Phase 1 and 2 for alternate and simultaneous flashing. Can be synchronized with other synchronizable products. Standard 4-wire pigtails.Size: 2" (50mm) H x 5-1/2" (140mm) D x 5" (127mm) L single, 9-3/4" (249mm) L dual.
ION™ Universal Mount SeriesUltra compact Super-LED water resistant light for interior or exterior use. Available in single and split colors in White or Black housings. Supplied with 6" pigtail. Synchronizable to other like Whelen Sync products. Includes universal mount: combination permanent/pedestal, clip, edge mounts, double sided tape. Optional bail bracket available in Black or White, and NEW Optional grommet mount, universal license plate bracket for two lightheads and pedestal mount in Black or Chrome. Surface mount flange models available, see lighthead section.Size: 1" (25mm) H x 1-1/4" (32mm) D x 4" (101mm) L.
SpitFire ION™ SeriesUltra compact Super-LED light for interior use. Available in single and split colors. Supplied with 8' straight cord and cigar plug with On/Off switch with LED "On" indicator and pattern selection switch. Synchronizable to other like Whelen Sync products. Includes universal bracket and windshield suction cup mount.Size: 1-5/8" (40mm) H x 3-1/2" (89mm) D x 4-3/8" (111mm) L.
SpitFire Plus™ SeriesA compact, full-featured, LINZ6™ Super-LED dash and deck light with 50% more light output in a smaller package than the original SpitFire. SpitFire Plus is the high performance, cost-effective alternative to the larger Whelen Avenger Series. Clear non-fluted lens and Black polycarbonate integral hood with bail bracket and 2 suction cups for mount-ing. SmartLED® design requires no external flasher. Multiple Scan-Lock flash patterns, including 4 California Title XIII and steady-burn. Alternating and simultaneous patterns available. Solid or split colors. Fully encapsulated. 8' cord with cigar plug On/Off switch and pattern control switch.Size: 1-5/8" (40mm) H x 3-1/2" (89mm) D x 4-3/8" (111mm) L.
Slim-Miser™High performance dash light with low cost. Brilliant LEDs in a slim low profile housing for dash mounting against the windshield with 3 suction cups. Multiple Scan-Lock® flash patterns. Eight foot straight cord with cigar plug and On/Off switch with LED "On" indicator. Available in solid or split colors. Size: 1-5/8” (42mm) H x 2-3/4” (70mm) D x 12-7/8” (326mm) L.
SlimLighter™ Super-LED®
Ultra slim profile dash light with dual TIR6™ Super-LED lamp panels. Attaches to the windshield with suction cup mounting swivel brackets or permanently to headliner or deck. Airbag compatible. Multiple selectable flash patterns. Pattern selection switches are located on back of assem-bly. Includes cigar plug with On/Off switch with LED indicator and 8’ straight cord. Optional bail bracket available. Size: 2”(52mm) H x 1-3/16”(46mm) D x 16-3/8”(416mm) L.
FlatLighter™ LEDDual LED lamp panels. Visor mount allows concealment of warn-ing light until needed. Airbag compatible. Includes two built-in hook and loop visor mounting straps. Multiple selectable flash patterns. Will return back to last flash pattern selected. Built-in On/Off switch. Color LEDs with clear outer lens, LEDs are available in Red, Amber, Blue, White or color combinations. Optional 400 Series color lens for customer installation. Size: 4-1/2” (114mm) H x 1-1/4”(32mm) D x 13”(330mm) L.
®
DASH & DECK LIGHTINGHigh intensity lighting for interior use, visible and concealed mounting.
Optional bail bracket SLPBKT1
5
IONJ
IONK1B
IONGROM
SFIONJ
AVN1B
AVNS2RB
SFP1J
SLPMMRR
FLLEDBR SMLLBR
IONPEDB
IONBKT1
Options shown with lightheads, purchased separately.
2” RoundLED sealed beam with flat lens in compartment lighting and Amber or Red clearance. Includes a three-piece adapter kit with 2-1/2” flange for cus-tomer supplied grommet, 3 and 3-1/2” flange. Options include a 2” grommet (hole cutout required) and a Black or Chrome surface mount flange kit. Size: 2” (51mm) Dia.
6
Dominator™ and Dominator Plus™ SeriesTIR3™ Super-LED for the Dominator Series and super bright LINZ6™ Super-LED for the Dominator Plus Series. Available as a six or eight light array Traffic Advisor™ or in two, four, six or eight light flashing models. Rugged aluminum housing with slide bolt mount. Fully encapsulated and fully waterproof with internal self-contained electronics for internal or external use. Available in Red, Amber, White and Blue. Options include suction cup bracket and cigar plug cord kit, swivel bracket kit, "L" angle bracket kit and rear mount kit for 2008-10 Tahoe. Size: 1-3/4” (44mm) H x 2-3/16” (60mm) D x 7” (178mm) or 14” (356mm) or 21” (533mm) or 28” (711mm) or 48" (122cm) L.
Raider™ Series500 Series Linear Super-LED lighting available in single or dual flashing models. Extruded alumi-num housing with slide bolt mount from the top, bottom or back of housing for versatile mounting options. Horizontal, vertical or upside down mounting make this the perfect light for a wide variety of applications. Weather resistant design makes this the ideal light for mounting externally. Size: 2-3/8” (60mm) H x 1-7/8” (48mm) D x 5-1/2” (140mm) or 11” (279mm) L.
SideKick™ SeriesSideKick adds critical lighting coverage to the sides of your 2013 Ford Police Interceptor Sedan or 2012 Chevy Caprice vehicle with incredibly bright ION light-heads. Installs in minutes withoutremoving the fender. Available in stan-dard or wide angle versions; single and split color. Single color models have 25 Scan-Lock flash patterns, split colors offer 69 flash patterns. 0.40 amps aver-age at 12.8 VDC. Sold in pairs.
V-Series™A versatile combination of Class I warning, take-down and ground illumination lighting all accomplished with three planes of light and remarkable “HDO™” (High Definition Optics) technology!Ideal for intersection lighting. Can be installed at a lower level on any vehicle. Three-in-one combination light for warning, take-down and ground illumination in one remarkably compact surface mount lighthead. 180° wide-angle warning light for Class I SAE 845 requirements. Standard models include surface mount flange in Chrome or Black. Options include an angled flange mount for mounting on a curved body panel of any vehicle and a pedestal mount for increased mounting adaptability. Hard-coated lenses. Scan-Lock™ flash patterns for the warning segment. Warning available in Red, Amber, Blue and White. Steady-burn White for take-down lighting plus White ground illumination. Size: 2-11/16" (68mm) H x 4-1/4" (109mm) W x 1-1/2" (38mm) D.
Flashing models! Two, four, six or eight light flashing models.! Multiple flash patterns and a steady-on mode.! May be synchronized to each other or to other Whelen Synchronized products.
Traffic Advisor models! Six or eight light arrays.! Six light array with two end flashing modules.! Six direction sequences and multiple Scan-Lock™ flash patterns.! Low power intensity mode.! Requires customer supplied switches or Whelen’s optional TADCTL1 control head with spaces for optional switches.
DIRECTIONAL LIGHTINGSuper-LED® lighting for interior or exterior use.
Optional TADCTL1 Control Head for Traffic Advisors.
Dominator Series with TIR3 Lightheads
Dominator Plus Series with LINZ6 Lightheads
®
D2AC
DP2BR
DP4AAAA
D4BBRR
D6RBAABR
R1R
R2RB
WIONSMCR WIONSMJ
WIONSMWB
TOA00MAR
TOCACCCR with TFLANGEC
TOA00MAR with adapter ring
D8AAA00 (Flashing)TAD8 (Traffic Advisor)
DP633000
SK01BB
V23CTPB
V23ATPB shown with optional V23P20B angled flange.
SK02JJ
DP800800 (Flashing)TADP8 (Traffic Advisor)
ION™ Surface Mount SeriesUltra compact Super-LED water resistant light for inte-rior or exterior use. Available in single and split colors in standard or wide angle light patterns. Includes flanges in choice of White, Black or Chrome. Supplied with 6" pigtail. Synchronizable to other like Whelen Sync products. Size: 1-3/4" (43mm) H x 1-1/8" (29mm) D x 5-7/8" (150mm) L.
7
4” RoundStrobe, LED or TIR6™ Super-LED warning. Back-up, brake/tail/turn, compartment light models available. LED brake/tail/turn model exceeds SAE requirements. Super-LED TIR6 has multi-ple Scan-Lock flash patterns with Phase 1 and Phase 2 for alternating/simultaneous flashing, for up to eight lightheads which include steady-burn and synchronize wire. Vehicle spe-cific, extended lens combination driving/warning lights, check current price list for models. Options include Black or Chrome trim rings or grommet mount kit. Size: 4” (102mm) Dia.
3” RoundLED flashing warning in Amber, Red, Blue or White and compartment lighting in White, Red and split Red/White. 3" Round Series is extremely low profile with bright illumination. Optional Chrome trim ring and grom-met. Size: 3” (76mm) Dia.
3-1/2” RoundDriving/fog light with a warning light override with two LINZ6 type reflec-tors. Interleaved models offer two colors in a single lighthead with White Super-LED driving light and warning mode offered in single warning color or in split colors. 31 Scan-Lock™ flash patterns and steady-burn.Size: 3-3/4” (95mm) Dia. x 1-1/4" (32mm) D.
TIR3™ / LIN3™ Super-LED SeriesSuper-LED surface mount modules are effective for a variety of appli-cations and include Black flange. Low current, vibration and moisture resistant. Has multiple Scan-Lock flash patterns with Phase 1 and Phase 2 for alternating/simultaneous flashing, for up to eight light-heads which include steady-burn and synchronize wire. Options include: Chrome, deep Chrome plated and cast aluminum flange for single lighthead, Black or Chrome plated flanges for dual lightheads, single or dual mounting brackets, single lighthead swivel bracket, trunk mount bracket, under sideview mirror bracket, license plate brackets for horizontal and vertical mount. Vehicle specific fender mount and motorcycle mounting available. TIR3: Directional TIR lighting, horizontal and vertical mount.LIN3: Linear-LED® wide angle lighting, horizontal mount.Size: 1-1/8” (28mm) H x 1-1/4” (32mm) D x 3-1/2” (89mm) L.
DIRECTIONAL LIGHTHEADS Strobe, LED & Super-LED®.
SmartSmart®
SmartSmart®
SmartSmart®
®
Strip-Lite™ LED SeriesCompact LED warning with multiple flash patterns. Two brake/tail/turn models one with turn signals and one with two flash patterns including SignalAlert. Super-LED compartment lights available in 2 intensity levels. Strip-Lite Tank Status Light with four color LED groups provides easy to identify indication of water tank status. Optional brush guard and 45° angle mounting.Size: 1” (25mm) H x 1-3/8" (35mm) D x 11-1/2” (292mm) L.
SmartSmart®
LINZ6™ Super-LED SeriesSub-compact linear with single or split side-by-side color or dual color modules. Multiple Scan-Lock flash patterns plus steady-burn. Horizontal mount. Split models can flash each side (3x3) alternately or simultaneously. Includes Black flange, optional deep Chrome flange and rubber grommet mount, horizontal and vertical license plate mounts, trunk mount brackets and 46° push bumper bracket.Size: 2” (48mm) H x 1-9/16” (40mm) D x 4” (102mm) L.
SmartSmart®
License plate brackets for LINZ6, TIR3 or LIN3 lightheads.
Grommet Mount RGROMMET
Side Mirror Mount RBKT5
Swivel Mount RBKT4
"L" Bracket RBKT1
Dual "L" Bracket RBKT2
Cast Aluminum Flange
RFLANGEA
Dual Flange RFLANG2C
TIR3 Horizontal Mount RSR03ZCR
TIR3 Vertical Mount
RVR03ZCR
LIN3 Horizontal Mount RSR02ZCR
3SR00FRR
3SB00FBR
PAR28C
PAR28J
3SA00FAR
2EJ00ZCR 201000AU
2FA00ZAR 20C0CDCR with 2GROMMET
20R00XRR
PSTANK
PSR00XRR
PSA00FAR
PSRASXCR
PSBKT1PSBKT451
RBKT6
RBKT7
LINZ6J LINZ6R
5GBKT1
2GBKT1
2G & 5G Smart-LED® design features multiple Scan-Lock flash patterns (SignalAlert™ 75 FPM default). Includes vinyl mounting grommet.Fits all applicable industry standard mounting accessories.Fully encapsulated electronics. Mounts either horizontal or vertical.Available with 6” integral wire leads or industry standard connector.Optional L-Brackets for grommet mount lighthead.Size with grommet: 5G: 3-3/16” (81mm) H x 7-7/16” (189mm) W. 2G: 5-1/2" (140mm) Dia.
SmartSmart®
2GA00FAR
5GA00FARindustry standard
connector
®PROFESSIONAL
HEAVY DUTY
Lightheads purchased separately
Lightheads purchased separately
Lightheads purchased separately
CL25C
86CE1
60C0EHCR
60C0EJCS
60CBEGCS split White/Blue shown in both color modes
60CREGCS split White/Red shown in both color modes
8
CL25 Series Surface mounted, two wire design
compartment light. Extends less than 2” into compartment. Clear or Red lens.
Bayonet style 25 watt lamp. Size: 5-7/8” (149mm) Dia. x 1-7/8”
(48mm) Protrusion.
INTERIOR LIGHTHEADS Illuminate cab, compartments and more.
6" RoundVirtually flush, surface mount lighthead fits in tight spaces and brightly illumi-nates a wide area. Seven models with 6, 12 and 18 Super-LED diodes, most available in 12 or 24 volt. 18 diode White model features Hi/Low intensity mode. 12 diode dual color models are available in split Blue/White and Red/White and feature two surface mounted switches for On/Off White and On/Off color. 6 diode White includes On/Off surface mounted switch. Size: 6” (152mm) Dia. x 5/8"” (16mm) Protrusion.
8635CU
8635CU Dual intensity, interior light with 14 and 35 watt snap-in halogen lamps. One piece reflector and flange.Size: 1-5/8” (41mm) Recess x 1-11/64” (30mm) Protrusion x 6-7/16” (164mm) W x 8-3/16” (208mm) L.
86CE1 Super-LED one piece reflector and Chrome plated trim flange. Hi/Low intensity mode.Size: 8-3/16" (208mm) W x 6-7/16" (163mm) D x 1-1/4" (32mm) Recess.
®
8WC00EZR Replaces 80C0EJCR
80C00EZR Replaces 80C0EHCR
80R0EKCR
80CBEHCR shown in blue mode
80CBEHCR/80CREHCR shown in
white mode80CREHCR
shown in red mode
80R0EJCR
8" Round NEW Super-LED® ambu-lance interior light requires no mounting hardware. Available in white or chrome housing. Other models available in 3 and 6 diode models with Red LEDs. Features Hi/Low intensity mode. 9 diode combination light with 6 diodes in Hi mode and 3 Blue/White or Red/White diodes in Low mode. Direct replacement to outdated halogen and incandescent lighting fixtures. Size: 8-1/2” (218mm) Dia.
Fluorent™ & Fluorent Plus™ Super-LED light tube designed for compartment lighting in incre-ments of 9" to a length of 63". Light tube rotates and locks in mounting brackets to direct light where it is needed. Fluorent Plus has twice the number of LEDs than the Flourent Series for bright-er illumination. Includes both P and C style mounting clips.Size: 5/8" (16mm) H x 9" (229mm), 18" (457mm), 27" (686mm), 36" (914mm), 45" (114cm), 54" (137cm), 63" (160cm) L.
Fluorent 27"F27C
Fluorent Plus 27"F27C
0AC0EDCR 0SC0EDCR
5GC0CCCR with optional
5GFLANGC
20C0CDCR with optional
2GROMMET
PSCOCDCRPSCOADCR
70C00WCR
40C00VCR
60C00VCR70C00VCR
LED Interior/Compartment LightheadsA wide range of sizes and intensities. Compact Strip-Lite™ Super-LED with uniform lighting and 600 and 700 Series are available in two levels of intensity. 4” Round is available with or without Deutsch® waterproof connectors. 2G and 5G standard with grommet. Optional Chrome and Black flanges available for most lightheads. 3" Round Series is extremely low profile with bright illumina-tion, perfect for those tight compartment areas. Models in Red, White, combination Red/White and NEW Blue/White with independent control of colors.Size: 3" (76mm) Dia.
3SC0CDCR
3SRCCDCRsplit Red/White
3SBCCDCR split Blue/White
3SR0CDRR
50C00WCRT0CACCCR
®
9
! The only patented Linear-LED® lighthead with unique lens shape. ! Models available in warning, brake/tail/turn, turn, back-up and scenelights. ! Completely illuminated with no dark spots. ! Surface mounted via two screws allows for fast and easy installation. ! Lighthead is designed with mounting screws outside of sealed
lens/reflector assembly eliminating water infiltration. ! Single colors are available in Amber, Red, Blue and White. ! Split colors are available in Red/Amber, Red/Blue and Red/White. ! Hi/Low is standard. ! Multiple Scan-Lock™ flash patterns utilizing solid, left/right, top/bottom,
in/out or diagonal sequencing. ! Steady-burn models available. ! Hard coated lenses resist scratches, chemical and UV damage. ! Surface mount scenelight features inner optics that directs light downward
without angle brackets.! Five year HDP® Heavy-Duty Professional warranty.
M2 Series! Standard or wide-angle warning.! Options include Chrome or Black flange, grommet mount kit and NEW
pedestal mount in Chrome or Black. ! 2-1/2” (64mm) H x 1” (25 mm) D x 4” (102mm) LM4 Series! Models with or without internal flasher that includes patterns & sync.! Options include Chrome or Black flange, grommet mount kit, Chrome
flange adapts M4 to 400 Series mounting, Black brush guard, Intersector Chrome housing for Freightliner M2.
! 3-3/8” (86mm) H x 1-3/8” (35mm) D x 5-1/2” (138mm) L.M6 Series! Models with or without internal flasher that includes patterns & sync.,
brake/tail/turn, Amber turn arrow, back-up light, gradient scenelight.! Options include Chrome or Black flange, Chrome flange adapts M6 to 600
Series mounting, Black brush guard, 15° angled surface mount housing in Chrome or Black, headlight mounting for ATI & KD housings and Chrome flange for two, three and four lightheads.
! 4-5/16” (109mm) H x 1-3/8” (35mm) D x 6-3/4” (170mm) L.M7 Series! Models with or without internal flasher that includes patterns & sync.! Options include Chrome or Black flange, Chrome flange adapts M7 to
700 Series mounting, Black brush guard, Intersector and grille Chrome housing for specific vehicles, check current price list.
! 3-3/8” (86mm) H x 1-3/8” (35mm) D x 7-5/8” (194mm) L.M9 Series! Models with or without internal flasher that includes patterns & sync.,
brake/tail/turn, Amber turn arrow, back-up light, gradient scenelight.! Options include Chrome or Black flange, Chrome flange adapts M9
(including scenelight) to 900 Series mounting, Black brush guard, 15° angled surface mount housing in Chrome or Black, headlight mounting for ATI & KD housings and Chrome flange for two, three and four lightheads.
! 6-1/2” (165mm) H x 1-3/8” (35mm) D x 10-3/8” (263mm) L. (All Series dimensions include flange)
M Series Super-LED® Surface Mount Lightheads
M SERIES LIGHTHEADSNewly re-designed lighthead series offers a wide variety of lighting options and mounting.
M6P15CM7GCV8C
M2PEDCM6HDLMTK
M7BC with optional M7FC
M6FCV4 M6FCV3
M6FCV2Optional flanges adapt M Series lightheads to older series lighthead mounting holes
M4FC400 M7FC700
M6FC600 M9FC900
M7D
M9A with optional M9FC M9LZCM9J
M9BUW M9T
M4BRUSH
M6BRUSH
M9BRUSH
M6BRUSH
M4K with optional M4FC
M4R with optional M4FB
M4DM4J with optional M4FC
M6R with optional M6FC M6T
M6BTTXM6ZCM6BUW
M2WR M2WR with optional M2GROM
M2J with optionalM2FC
M2B
M6J
M7J
M2 Series
M4 Series
M6 Series
M7 Series
M9 Series
OPTIONS (Lightheads purchased separately)
®
400 Series Compact size warning in linear strobe, snap-in halo-gen, single or dual level Super-LED. LED back-up/interior, Amber turn signal NEW brake/tail/turn. Strobe and halogen require power supply or flasher, purchased separately. All 5 safety colors.Optional Chrome plated or Black flange; surface mount adapter in Black or Chrome, and swivel pedestal mount.Size: 3-1/16” (77mm) H x 4-15/16” (124mm) L.
DIRECTIONAL LIGHTHEADSNewly re-designed lighthead series offers a wide variety of mounting configurations.
Shown with optional pedestal housing in
Black or Chrome
Optional Chrome
Plated Flange4EFLANGE
Optional Black Flange
4FLANGEB
SmartSmart®
500 Series Linear strobe, snap-in halogen, incandescent brake/tail, surface mount LED, LED back-up, brake/tail, scenelights, and compart-ment lights, LIN6™ and TIR6™ Super-LED. Available in split LED or solid colors. Strobe and halo-gen require power supply or flasher, purchased separately. LIN6 and TIR6 have multiple Scan-Lock™ flash patterns. Optional Chrome plated or Black flange; rubber grommet; pedestal/swivel mount; brush guard; polished aluminum flange; Black and Chrome surface mount adapters; L-bracket; surface mounts, or round bar mounts in 1” and 1-1/4” versions. Size: (lens)1-5/8” (41mm) H x 5” (127mm) L.
Optional Mounting Configurations (Lightheads purchased separately)
SmartSmart®
40J000CR
50RV27ZCR
50A02ZAR
50A03ZAR
50AR2ZCR
5SA00FAR
50K000AR
50R00FRR
502000AU
5FLANGEC
5FLANGEB
5GROMMET
5TSMAC
5HSGPED
5BRUSH5HSGB1 5GBKT15BKT152SMAB
40RB5SCR
402000RU
40C00VCR
40A00AAR
40A02ZCR
4EGRILB
4EGRILP
40BTT50R00XRR
SURFACE MOUNT DIRECTIONAL LIGHTHEADS Eliminate need for large cutouts and require only 3/8” access hole for lighthead cabling.
508 SeriesSurface mount. Available in linear strobe or dual lamp halogen warning and scene-lights with a 8-32° light spread. Optional Chrome plated trim ring. Size: 5” (127mm) H x 2” (51mm) D x 8-11/16” (221mm) L.
810 SeriesSurface mount. Available in linear strobe or dual lamp halogen warning and scenelight with a 8-32° light spread. Installed on vehicle with four mounting screws or double sided tape (customer supplied). Optional Chrome plated trim ring. Size: 8” (203mm) H x 2” (51mm) D x 10” (254mm) L.
58EC20RU
81EC20RU 810CAARR
580CAABR
10
0S Square Lens SeriesSmall LED lighthead in a oval Chrome housing for flashing warning, marker/clearance and illumina-tion, 45° bezel step light and 24 volt model. Available in Red, Amber, White or Blue. Size: 1” (25mm) H x 1-1/2” (38mm) W x 1/2” (13mm) D.Bezel model: 1" (25mm) H x 7/8" (21mm) D x 1-7/8" (48mm) L.
0R Round SeriesSmall LED light for door panel mounting with clear lens. Available in Amber, Red, Blue or White with single flash pattern. Steady-burn available in Amber, Red and Blue. Size: 3/4” (19mm) H x 3/4” (19mm) W x 1/2” (13mm) D.
0SB00FCR0SR00FCR
0SCOEDCR 0AC0EDCR
11
®
Models 600, 700 and 900 are available as warning, primary, secondary and approved supplemental lighting applications for stop/tail/turn signals, back-up lights, arrow lights and angled scenelights.
900 SeriesLargest size of lighthead series. Linear strobe, halogen, surface mount Linear-LED, split Linear-LED. NEW LED brake/tail/turn, LED turn arrows, halogen and LED back-up/interior lights and halogen scenelights. Warning lights in all five safety colors. Optional Chrome plated or Black flange. Size: 7-1/8” (181mm) H x 1-7/8”(48mm) Recess x 9-1/8” (232mm) L.
600 SeriesMedium size lighthead in linear strobe, halogen, surface mount Linear-LED, split Linear-LED, min & max LED, back-up/interior. NEW LED brake/tail/turn. Amber arrows in LED and incandescent utilizing #1157 bulb; halogen back-up and scenelight. Warning lights in all five safety colors. Optional Chrome or Black flange, universal 15° downward angle surface mount and headlight mounting kit.Size: 4-1/8” (105mm) H x 1-5/8” (41mm) Recess x 6-1/2” (165mm) L.
DIRECTIONAL LIGHTHEADSNew Linear-LED® lightheads with Super-LED® intensity that rivals strobe in intensity.
700 SeriesMid-size lighthead in linear strobe, relampable snap-in halogen, surface mount Linear-LED, split Linear-LED, halogen and Super-LED scene-lights, min & max LED back-up/interior light, LED chevron arrow and Amber halogen turn arrow, and NEW LED brake/tail/turn. Warning lights in all five safety colors. Optional Chrome or Black flange for surface mount, or vehicle fender, grille or side hood mounting.Size: 3-1/16” (78mm) H x 1-3/4” (44mm) D x 7-1/4” (184mm) L.
Optional Chrome
Plated Flange 9EFLANGE
or 90FLANGC
SmartSmart®
SmartSmart®
SmartSmart®
Optional Chrome Plated
Flange 6EFLANGE
Optional Black Flange 6FLANGEB
Optional Black Flange 9FLANGEB
or 90FLANGB
Optional Chrome Plated Flange
7EFLANGE Optional Black Flange 7FLANGEB
602000RU 60RC5FCR
60C00VCR 60C00WCR
60J000CR 60A02FAR
60BTT
60A00TAR 60X000TR
60F000BR
702000BU
90F000RR 90AA5SAR 902000GU 90RA5FCR
90A00TAR 90BTT 90J000CR
70F000RR
70A02SAR 70RC6FCR
70BTT
70A00TAR 70X000TR
70C00VCR 70C00WCR
70J000CR
CAST3H
7CAST3
7EGRILP
7EGRILB
64FKIT
73FKIT
97FKIT
7CAST1CAST1L
CAST4V
6EHDLTMK
CAST3
Hide-A-Way Strobe TubesIdeal for marked and unmarked vehicles. Smallest strobe lamp assembly available. Easy to install in composite style headlight/taillight assemblies.HA239C has soft plug-in design with Clear bulb. HA238 has flange style and is available in Amber or Clear. Size: 1-5/8” (41mm) H, mounts into 1” (25mm) Dia. cutout.
LIGHTHEADS & SYSTEMS FOR SPECIAL APPLICATIONSHigh efficiency optics designed for emergency signalling.
12
Mirror Beam™ SeriesMid-level warning with custom molded housings that fit over existing mirror glamour caps. Models with 500 Series and ION™ Super-LED lightheads put warning at mid-level where you need it most, forward and at critical intersection angles. Multiple flash patterns. Models can be synchronized for alternating or simultaneous flashing. Vehicle specific models, check current price list for vehi-cle models and years. Sold in pairs.
SmartSmart®
SmartSmart®
Vertex™ Super-LED LightEncapsulated self-contained surface mount cornering or taillight assembly has in-line lamp driver which requires no external flasher. Optional flange in Black or Chrome plate allows it to mount outside the vehicle in any loca-tion you want. No RFI noise emitted for radio interfer-ence. Multiple Scan-Lock flash patterns, includes syn-chronize feature for alternating and synchronous flashing of multiple lamps. LED color must match color of lens it is installed behind, except White. 9' connector cable. Red, Blue, Amber or White and split colors. Size: Lamp: 7/8" (22mm) H x 1-1/2" (38mm) Dia. Lamp Driver: 7/16" (11mm) H x 15/16" (23mm) W x 4-3/4" (120mm) L.
Vertex Competitor™ Super-LED LightEconomically priced, 6-LED Vertex with SmartLED®
electronics built into the base which requires no external flasher. May be internally mounted inside of headlight and taillight assemblies or mounted to exterior surfaces and mounts in any position. Available in Red, Blue, Amber and White. Multiple flash patterns. Fully encapsu-lated for moisture and vibration resistance. Supplied with 6-inch wire pigtail. Simple installation via two screws in base. Optional Black or Chrome flanges.Size: 1" (25mm) H x 1-5/8" (41mm) Dia.
Hide-A-Way Strobe SystemsEach system includes 4 Hide-A-Way strobe lightheads with 15’ cables, AMP Mate-N-Lok® connectors and remote strobe power supply CSP660 six outlet, 60 watt or CSP690 six outlet, 90 watt with 10 Scan-Lock™ flash patterns. Available with either HA239C, Clear (soft plug-in style) and HA238A, Amber (flange style) strobe lightheads.
VTX609J
VTC6R
HA239C
CSP660CSP690
HA238A
HA238A
MBPS07R
MBDC11JJ
HA239C
S660CCCCS690CCCC
S690CCAA
S660AAAAS690AAAA
VTX609Rwith VTXB
VTX609R
VTX609Bwith VTXC
Halogen and Super-LED® ScenelightsOpti-Scenelights feature redesigned optic lenses that fill the lighthead with light and direct light downward over 8-32° without angle brackets. Super-LED mod-els draw minimal current and are designed for heavy-duty operation, vibration, moisture and corrosion resistance. Available in 500, 508, 600, 700, 810 and 900 Series models, and surface mount M Series.
90E000ZR
70K000ZR
70C0ELZR
60K000XR6SC0ENZR
M9LZC
9SC0ENZR M6ZC
580CAAZR
810CA0ZR
50C000ZR
Safety Site™The safe, environmentally friendly alternative to flares. Highly effective encapsulated Red LED light modules designed for temporary warning in a wide range of applications. Can be used horizontally or vertically. Sold as single modules or in a kit of 5 modules in a compact Cordura® duffle bag. Visible to 5-7 miles. Powered by 3 C-size alkaline batter-ies, not included. Size: 5" (125mm) H x 3" (74mm) D x 4-3/4" (122mm) L.
W20SSRK
W20SS
®
13
LIGHTHEADS FOR SPECIAL APPLICATIONSHigh efficiency optics designed for emergency signalling.
Pioneer™ & Pioneer Plus™ Super-LED® Floodlights and Spotlights
Upgrade outdated halogen or HID lighting with UL® Approved Pioneer Series Lightheads. Pioneer Plus has twice the lumen output of the original Pioneer with usable lumens ranging from 3,000 to 22,000 depending on the model selected. Floodlights are available in four intensities with single and dual models. Models include Spotlights, available in 2° and 8°; and a dual lamp combination Floodlight/8°Spotlight. Floodlights are available in three voltages: 12, 24 or 120 VAC which can be connected to a generator to provide floodlighting away from the vehicle's power source without significant voltage drop. Pioneer Series with solid-state electronics feature instant On/Off eliminating high current ramp up time and high current in-rush, along with the high cost of lamp or ballast replacement. A redesigned rugged, all aluminum housing is powder coated and available in Black or White. All Pioneers have Whelen's five year HDP® Heavy-Duty Professional warranty.Size: Lighthead without bracket: 4-1/4" (108mm) H x 2-7/8" (71mm) D x 8-3/16" (207mm) Single, 14" (356mm) Dual, L.PCP3 Size: 6” (125mm) H x 14” (356mm) L x 2-7/8” (73mm) D.
Micro Pioneer™ Super-LED Floodlights and Spotlights
Rugged die cast aluminum housing in a smaller size than the original Pioneer fits almost anywhere on your vehicle. 8° spotlight lens comes installed on lighthead and three additional lenses are provided for a choice of light pattern of 90° H x 20° V wide flood; 40° H x 20° V flood and 40° H x 8° horizontal flood. Optic lenses changes easily via four screws in picture frame fixture. Available in 12 and 24 volt models. 12 volt draws 4 amps, and 24 volt draws 2 amps. Both produce 3800 lumens. Models available with mounting options of powder coated stainless steel bail bracket with 3/8" stud bolt mount; recessed models with straight or fixed 15° downward angle; and low profile pedestal/swivel in Chrome or Black. Five year HDP Heavy-Duty Professional warranty. Size of lighthead only: 4-1/4" (108mm) H x 2-7/8" (71mm) D x 4-3/4" (121mm) L.
Pioneer SlimLine™ Super-LED Floodlights and Spotlights
Slim rugged die-cast White or Black powder coated housing.Remarkably bright and rated to last thousands of hours with lowamp draw. Single lamp contains 12 LEDs, provides 3000 usable lumens at 35 watts. Dual lamp contains 24 LEDs, provides 6000 usable lumens at 70 watts. Single unit comes with two interchangeable lenses: Spot lens with 8º optics installed, and flood lens with 40º H x 20º V optics. Dual unit comes with 3 interchangeable one piece lenses: Dual spot lens with 8º optics installed; flood lens with 40º H x 20º V optics; combination lens with 8º spot optics and 40º H x 20º V flood optics. Available in 12 or 24 volt. Models in bail bracket, recessed housing in straight or 15° downward angle, low profile pedestal swivel mount and brow mount for Freightliner M2 and International chassis. Five year HDP Heavy-Duty Professional warranty. Size of lighthead only: 3" (76mm) H x 1-7/8" (48mm) D x 6-7/8" (175mm) L single, or 12-1/2" (317mm) L dual.
®
PBA103 PBA203 PBA106
PBA0130
PBA206
PBAPEDA
MPBBMPPB
MPR15B
MPRW
PBAPEDD
PFP2LB1
PSL1R54 PSL1BB
Recess Mount Bail Bracket
Lightbar Mount
Pole Mount Adapter
Pedestal MountBrow Mount
Pioneer Plus 2° Spotlight
PTP1
Pioneer Max™ Floodlight
and 8° Spotlight
PCP3
Pioneer Plus 8° Spotlight
PSP1Pioneer Single Lamp
PFA1
Pioneer Plus Dual Lamp
PFP2
Pioneer Plus Combination
Floodlight and 8° Spotlight
PCP2
®PROFESSIONAL
HEAVY DUTY
Mountings available are recessed mount with Chrome trim ring mounts straight out or 15° fixed downward angle; vehicle specific brow mounting brackets; uni-versal bail bracket adjustable to 25° upward or downward; pedestal mount bracket (that tilts up/down, base swivels 360° and includes removable handle); pole mount adapter fits Whelen poles or most industry standard 3/4" NPT poles and includes removable handle; and lightbar mount designed for Ultra Freedom™ Lightbar. NEW Pole mounts are available in three sizes of tri-pods plus side and thru mounts with 12" or 20" grab handles.
PFA1PPFA2P1
3000 Series
Tri-Pod 8728301
PSL2B PSL2P
Approved
To help bulid your Pioneer System, please contact a Whelen representative near you or download a copy of our Pioneer Designer on www.whelen.com.
14
PAR-36 SUPER-LED® WORKLIGHTSA variety of bright illumination in four mountings.
PAR-46 SUPER-LED WORKLIGHTSDrop-in Replacement Lamps and hand held spotlight.
®
PFBP12C
PFBP12
PFBS12
PFBS6
Pedestal Swivel and Stud Swivel Spotlights and FloodlightsChoose from floodlight or spotlight, and pedestal/swivel and stud/swivel models. 12 VDC in two intensity choices. 6 diodes at 0.85 amps with 500 lumens, or 12 diodes at 1.70 amps with 1300 lumens. Lamps include 10” wires; contact factory for custom wire lengths and termination. Built-in On/Off switch. Die cast housing with Black or Chrome rear cover. Pedestal swivel includes T-handle. Size Pedestal: 8-3/8" (211mm) H x 4-5/8" (117mm) D x 5" (127mm) Dia. Stud/swivel: 6-3/8" (162mm) H x 3" (76mm) D x 5" (127mm) Dia.
! Ultra bright Super-LED with low current draw and long life.! Five-year HDP® Heavy-Duty Professional warranty.
Hand Held Spot/FloodlightRubber housing hand held, spot/flood combination with 90# pull magnet mount, 8’ coiled cord and cigar plug. 12/24 VDC dual voltage (.85A@12V, .325A @24V) and produces 500 lumens. Waterproof durable On/Off push-button switch. Size: 9-3/8" (239mm) H x 3-1/2" (88mm) D x 4-5/8" (117mm) Dia.
Rubber Housing WorklightCombination spotlight/floodlight. Rubber housing with stud/swivel stain-less steel bracket and hardware. 12/24 VDC. 500 lumens. Size: 5-1/2" (140mm) H, excludes bolt x 4-7/8" (122mm) Dia. x 3-5/8" (91mm) D.
Rubber Housing WorklightChoose 2° white 9 diode spotlight or 18 diode dual color 8° White spotlight with Red or Blue warning with independent control of spotlight and warning light with spotlight override. Rubber housing with stud/swivel stainless steel bracket and hardware. 12VDC. 2° spotlight produces 1800 lumens, 8° spotlight produces 1200 lumens. Size: 7-3/8" (188mm) H, excludes bolt x 3-3/4" (94mm) D x 6" (152mm) Dia.
PAR-46 Series Replacement Lamps Drop-in replacement for outdat-ed halogen lamps. Choose from 2° spotlight, 8° spotlight and 20° high x 60° floodlight. Reverse polarity protected heavy-duty powder coated die-cast aluminum heatsink reduc-es heat and moisture build-up. 12 VDC. Models range from 1200 lumens to 2000 lumens. Emits no EMI.
PAR-46 DUO™ Spotlight lamps for Unity® SpotlightDesigned especially for the Unity® Spotlight only. DUO technology combination 8° spot-light and flashing color warning light with 12 White diodes and 6 color diodes in the same lighthead. Choose from three models: (1) toggle from steady White to flashing warn-ing, (2) steady White and flashing warning plus alternating flashing with flashing White, (3) toggle from California Steady Red to steady White.
PAR-36 Series Super-LED® Work Lights
Replacement LampsSpot/floodlight combination drop-in replacement for outdated halogen lamps. Non-polarity sensitive. 500 lumens, 12/24 VDC; 0.65 amp @ 12 VDC, 0.325 amp @ 24 VDC. Lightweight, low current and water resistant. 5 year HDP warranty. Size: 4-1/2" (111mm) Dia x 2" (52mm) D.
P36SLCHG
P46SLC2° floodlight
P46S2R / P462R3 / P46S2X
P46FLC8° spotlight
P46FLB8° spotlight
P46FLR8° spotlight
P46S3RH shown in Red warning and White spotlight
P46WLC20° high x 60° wide
floodlight
P36SLC
Hand Held SpotlightRubber housing hand held, 2° spotlight with 90# pull magnet mount, 8’ coiled cord and cigar plug. 12 VDC at 2.3 amps and produces 1800 Lumens. Waterproof durable On/Off push-button switch. Size: 10-1/2" (270mm) H x 3-3/4" (94mm) D x 6" (152mm) Dia.
P46HHS
P36HHS
P46SLCHG
15
! Flash pattern control.! Built-in intelligence. Stable on power-up, immune from false triggering.! IPS & UPS Series offer auto-ranging power regulation, eliminates
flash intensity variations.
! Output short circuit protection, RFI suppression, MOSFET electronics.! AMECA Certified (most models) to SAE, NFPA, California Title XIII.! Five year HDP® Heavy-Duty Professional warranty for USP and ISP
Series, 2 year on Competitor and Competitor Plus Series.! Scan-Lock™ pattern control lets you scan through multiple
flash patterns and lock in the one you want.
ISP188180 watts, eight outlets, 12 VDC. Outlet 16 Scan-Lock flash patterns. Control: 2x2x4. Size: 2-5/8" (67mm) H x 8-5/8" (219mm) W x 9-1/8" (232mm) D. Weight: 5 lbs., (2.26kg)
ISP9490 watts, four outlets, 12 VDC. 8 Scan-Lock™ flash patterns.Outlet Control: 2x2. Size: 2-3/8" (60mm) H x 6-7/8” (173mm) W x 7” (178mm) D. Weight: 2.5 lbs., (1.13kg)
CS24040 watt output, two outlets, 12/24 VDC.10 Scan-Lock flash patterns. Size: 1-3/4" (38mm) H x 3" (76mm) W x 6-3/4" (171mm) D. Weight: 1.5 lbs., (.56kg)
UPS64LXA75 watt output, four outlets, 12/24 VDC. 10 Scan-Lock flash patterns and synchronize wire. Outlet Control: 2x2. Size: 2-1/2" (64mm) H x 5-7/8" (149mm) W x 6-3/4" (171mm) D. Weight: 3 lbs., (1.36kg)
ISP Series Power Supplies
Universal® Series Power Supplies
Competitor Plus™ Series
Competitor™ Series
CSP66060 watt output, six outlets, 12/24 VDC. Outlet Control: 2x4. 10 Scan-Lock flash patterns.
CSP69090 watt output, six outlets, 12 VDC. Outlet Control: 2x4. 10 Scan-Lock flash patterns. Size: 2-5/8" (67mm) H x 11-5/16" (287mm) W x 8" (203mm) D. Weight: 2 lbs., (.75kg)
POWER SUPPLIESOffering the widest range of performance, features and economy in the industry.
LIGHTHEADS FOR SPECIAL APPLICATIONSPan and tilting worklight, Micro lightheads and ground perimeter lighting.
Pan & Tilt™ Spotlight360° Remote control Super-LED® spotlight with wired or wireless controller. Pans 210° left, 210° right, tilts 90° upwards, 20° downwards. Pan rotation speed is 30° per second. Tilt speed is 25° per second. Defaults to home position after use. Instant On/Off and no high current on-rush and warm-up time. Heavy-duty LEDs are rated for thousands of hours of use and provide 1475 Lumens. Low current draw of only 2 amps. Permanent or flange mount. Polycarbonate base and hard coated dome with silicone gasket to protect unit from moisture, dust and fading. 12.8 VDC. Five year HDP® Heavy-Duty Professional warranty. Size: 8-3/4" (220mm) H x 7-3/4" (196mm) Dia.
Perimeter Enhancement LightMulti-purpose Super-LED for illuminating the work area around emergency vehicles. Six diodes in a rug-ged polycarbonate surface mount housing. Available in Chrome or Black housing. Steady-burn, White light is projected downward at a 40° angle to illuminate a large area. Mounts to vertical surfaces and may be mounted inverted. Molded rubber gasket protects body panels. Supplied with 6" pigtail. Five year HDP Heavy-Duty Professional warranty. Available in 12 and 24 VDC models. Size: 2-1/4" (56mm) H x 1-5/8" (42mm) D x 7-7/8" (201mm) L.
®PROFESSIONAL
HEAVY DUTY
®PROFESSIONAL
HEAVY DUTY
PT360PW wireless controller
PT360P wired controller
Permanent and flange mount shown in home position
Permanent mount shown in tilted
position
PELCC
Micro Freedom™: Two Linear Super-LEDs and built-in electronic flasher with 75 SignalAlert™ FPM per light module. Size: 4” (102mm) H x 10-1/16” (256mm) D x 10” (254mm) L.
Micro Liberty™: Two or four Linear Super-LED modules and built-in electronic flasher with 75 SignalAlert FPM per light module. Size: 2-1/2” (64mm) H x 12” (304mm) D x 9-1/2” (241mm) L.
Micro SeriesSuper-LED assemblies may be mounted to cab or mirror mount brackets. Certified as system component to SAE & California Title 13 specifications. Two module lightheads, with color outer lenses are designed to be used as a pair. Heavy-duty extruded aluminum frame provides 240° light output. Vibration resistant.
Micro LibertyMCSLED2A
Micro Ultra FreedomMCFLED2A
16
Electronic Back-Up AlarmsRugged alarms are easy to install horizontally or vertically. All are 12/24 VDC and have glass-filled nylon housings. Encapsulated solid-state electronics are steam cleanable; pressure washable. Alarms meet OSHA, Bureau of Mines, and all State Regulations. Operating temperature range: -22° F - 131° F.
WBUA97/10797dB/107dB.Size: 2-3/4” (69mm) H x 1-1/2” (38mm) W x 4” (102mm) L.
WBUA11287-112dB, self-adjusting to maintain 5dB above ambient noise level.Size: 4” (101mm) H x 5-1/8” (130mm) W x 2-7/8” (73mm) D.WBUA112C112dB, constant output.Size: 4” (101mm) H x 5-1/8” (130mm) W x 2-7/8” (73mm) D.
UFM8Eight outlet, solid-state Universal® halogen flasher, 60 watts per outlet. Selective switching system (2x2x2x2 switching) separately controls the operation of each pair. 16 flash patterns plus a Traffic Advisor™ pattern. Size: 1-3/4” (44mm) H x 5-3/4” (146mm) W x 6-3/4” (170mm) D. Weight: 1 lb., (454gr)
ULF44Four outlet, four channel LED flasher, with 62 Scan-Lock™ flash patterns allowing for alter-nate or simultaneous flashing of lightheads. Encapsulated for water resistance and rugged performance. Size: 1-5/8" (41mm) H x 2" (50mm) W x 2-3/4" (70mm) L.
HALOGEN & LED FLASHERSFlashers for headlight and grille light systems.
BACK-UP ALARMSEconomical, easy to install.
Headlight & Grille Light FlashersHigh reliability, solid-state relay driven flashers in compact polycarbonate housings with mounting flanges. Epoxy encapsulated for moisture resistance. Select switching for positive, or bi-polar (pos/neg) switching headlights. Size (flasher only): 1-1/2” (38mm) H x 4-3/16” (81mm) W x 3” (76mm) D. Weight: 10 oz., (283gr).
AFM1660Two wire design, 16 outlet halogen/LED flasher; each outlet will operate up to a 65 watt lamp (5 amps); 4 Scan-Lock flash patterns. Interior use only, KKK-F certified. Size: 5/8” (15mm) H (without connectors) x 7-1/4’ (184mm) W x 3-3/4” (95mm) D.
AFM560One wire design, 5 outlet halogen/LED chassis ground flasher; three outlets will operate upto four 25 amps each; two outlets will operate up to 10 amps each. 4 Scan-Lock flash patterns. Interior use only, KKK-F certified. Size: 5/8” (15mm) H (without connectors) x 7-1/4” (184mm) W x 3-3/4” (95mm) D.
AFL530Five post ring terminal block, encapsulated LED flasher. Three outlets will operate up to 30 amps each; two outlets will operate up to 5 amps each. 4 Scan-Lock flash patterns. KKK-F certified.Size: 5/8” (15mm) H (without connectors) x 6-1/2” (165mm) W x 2-3/4” (70mm) D.
SSFPOS 100% solid-state, 2 outlet, 160 watts per outlet, 7 flash patterns, for positive switching headlights.
SSFPOSI6Same as SSFPOS, except includes mating plug for 2006-12 Chevy Impala and 2007-12 Chevy Tahoe police package.
UHF2150A 4 flash patterns, for positive or negative headlight switching (not for Chevy Impala).
Universal Halogen & LED Flashers
®
17
®
LEGACY™ LIGHTBARSWhelen's Sharper Edge®!
All DUO+™ Super-LED® Lightbar.
! Lower profile than Liberty but with increased intensity puts the Legacy a step ahead of all other lightbars on the market today and tomorrow.
! New Diamond Optix™ (Patent Pending) linear reflector optic design.! Newly designed, high-output one-piece linear combo “Multi-Angled”
corner modules produce light forward and rear and at the critical 45° angles. The four combo modules produce 360° warning signal.
! All warning lightheads are True DUO+, whether one color or two. Each segment can be operated independently or at the same time, creating the first true DUO lightbar, without loss of intensity. Ideal when you want to run a Traffic Advisor™ and rear warning at the same time, giving the performance of two lightbars in one.
! Whelen’s exclusive Collimator™ patented design captures, collects and focuses light for unbeaten light output.
! Optional take-downs are available in a 3-LED or 6-LED modules.! Optional alley or DUO+ integrated alley and warning light module
ensures no dead spots, no gaps… 360° of contiguous light.! Only DUO+ lets you operate the alley and the warning at the same
time, at full intensity.! DUO+ technology and Advanced Thermal Design “ATD” provide
attention demanding new flash patterns for more lighting on-time. These include “Steady Flash” for use at nighttime traffic stop/accident scene for added protection for officers. ATD reduces the stress on the LEDs themselves, when the dwell time of the LEDs is extended.
! One piece UNI-DOME construction with a single sealing point. Each dome slides onto the aluminum extrusion and wraps around all internal components while the wiper seal protects your lightbar from the worst elements.
! Center divider(s) with LIM (Liquid Injection Molded) wiper seals assure lightbar integrity in all conditions.
! Legacy “plug and play” into the CenCom Sapphire™ or CanTrol™ controller. A WeCan® controller module is supplied for use with other switch centers from the lightbar.
! Hard-coated lenses shrug off environmental UV damage from the sun, salt and road chemicals.
! Legacy is the first lightbar with a photocell to automatically dim at night and still meet SAE Class I requirements in low power mode.
! The I/O board snaps into brackets, and point to point wiring between each lighthead and the I/O board create a clean look and allows for easy serviceability.
! Many patents pending.! Standard lengths: 44” (110cm), 48” (123cm) and 54” (136cm),
Height without mounting feet is only 1-5/8”.
Legacy lightbar melds to the vehicle’s roof.
Complete light coverage with no dead spots between modules.
Bright illuminating take-down lights
Multi-angled combo corner modules produce light straight out and to front and critical 45° angles.
DUO+ alley/warning module shown in White mode and shown in Red mode in photo above.
DUO+ lets you flash the lightbar in multiple colors.
Including Traffic Advisor™ patterns.
To help you build your Lightbar, Whelen’s “WeCad™” build-a-bar program is available on our Website at: www.whelen.com
18
LIBERTY™ SUPER-LED® LIGHTBARSExtreme low profile makes it difficult to detect on the roadways.
SX, SP, SZ, SY Series, Low Current Switching with
! Each Super-LED lighthead is driven by a single all electronic module that provides proper input power and choice of flash patterns.
! Scan-Lock™ allows you to easily scan through multiple flash patterns and lock in the desired pattern. Every pair of lights can have its own unique pattern.
! Low current operation uses a small diameter external cable harness for operation with standard, or low current switch controls or micro switches.
! SZ Series allow for optional DUO Super-LED inboard, corner or all modules to both the front and/or rear of the lightbar. Each module contains two sets of different color LEDs, allowing for true dual color modules without giving up light intensity.
! Optional Traffic Advisor with ultra high intensity Linear Super-LED modules, split or DUO Traffic Advisor.
! Pre-wired with 15’ passenger side cable exit, optional driver side cable exit.
SA, SB, SW, SR Series Programmable with
WeCan® Programmable Series includes an external interface unit, the WeCan Electronic Control Module (ECM), which communicates all lightbar operating functions. All functions are programmed by a PC via simple “pick & click, or drag” screens. Windows® based 2000, XP or later operating system required. USB input to the ECM from PC or laptop makes programming easy.
! Small cable allows for easier overall wiring and installation.! Up to 18 different programmed warning configurations can be
operated via customer supplied switching to each of the 18 input wires to the ECM (default program pre-installed). Once programmed, selection of these wires will allow for:
for alternating, simultaneous & combination flash patterns.
levels.
Super-LED lightheads, excluding the four corner modules (required for SAE certification).
traffic arrow functions (left, right, split) does not require a Traffic Advisor control head.
! The WCC9 (substituted for the ECM) has 10 pre-programmed lightbar configurations accessible via dip switches, for use with single color WeCan lightbars only.
! WeCan Electronic Control Module can be deleted when a WeCan lightbar is being used with a Whelen CenCom Sapphire™or CanTrol WC™ siren/light control system.
Extended corner modules provide added coverage to critical angles.
The only Patented Linear-LED ModuleOn the Market Today
®
Series WeCan Low Current
Corner Module
Single Color
DUO Corners
DUO Inboards
DUOTA
SA
Yes -
Standard
Yes
-Yes
Yes
SBExtended
YesSR
--
SWStandard
SY
- YesYes
SZExtended
YesSP
- - -SX Standard
Optional SXALF1 LR11 Super-LED
flashing alley light.
Optional SXTLS12 LR11 Super-LED
flashing take-down light.
Optional SXTDLED super high intensity Super-LED flashing
take-down light.Optional SOLARPWC
solar panel compensates for parasitic draw.
Optional WCC9 WeCan electronic control head.
All Liberty Lightbars Feature All the latest technology, and heads up warning in an extreme low profile lightbar that’s almost undetectable.
! An all Linear-LED® lightbar.! Heavy-duty, long life operation with low current draw.! Build your lightbar in any color combination with warning LED
modules in any position you want.! Choose the standard extended corner models (SA, SX, SW or SY), or
the extra high intensity corner models (SB, SP, SR or SZ).! Choose a four corner model, then add up to 12 Linear-LED directional
modules in pairs, for a total of 16 modules, now or at any time in the future.! Super-LED LR11 take-downs, and alleys with 15° horizontal adjustment.! Optional brake/tail/turn lights.! Optional Traffic Advisor™ available in single color or DUO™ modules for
combination Traffic Advisor and warning capability in a single lighthead.! Optional solar panel compensates for parasitic draw from the vehicle's
computer, improves battery efficiency and extends battery life.! Photocell option for Hi/Low power.! Extruded aluminum chassis provides superb strength and stability.! All LED modules feature wide-angle design for increased performance.! Clear outer lenses are standard, optional color lenses are available.! Five year HDP® Heavy-Duty Professional warranty on LEDs.! All models exceed SAE requirements.! Size: 2-1/2” (64mm) H x 12" (304mm) W x three standard lengths;
43-1/8” (109cm), 48-1/2” (123cm) or 53-7/8” (137cm).
To help you build your Lightbar, Whelen’s “WeCad™” build-a-bar program is available on our Website at: www.whelen.com
shown in Amber Traffic Advisor mode and in Red/Blue warning mode
DUO™ Technology Modules
SR8RRBB with optional SXTLS1 take-down lights, SLDRR/SLDBB inboard and SXALF1 LR11 alley light options.
LIBERTY™ DUO™ SUPER-LED® LIGHTBARSMultiple color LED diodes in the same module.
®
Liberty DUO Super-LED Lightbars
Liberty™ TRIO™ Super-LED® Lightbars
Now Available in WeCan®
DUO Technology has different color LEDs in the same module allowing one lightbar to flash different colors and different flash patterns all in the same lightbar
without giving up light intensity!
DUO Technology shown in Amber Traffic Advisor™ mode and in Red/Blue warning mode
With DUO Technology you can change your Red/Blue warning lightbar to a flood work light with a flip of a switch!
With DUO Technology, it's like having multiple lightbars in one!
! DUO models have the ability to flash different colors in the same lightbar giving you up to four lightbars in one!
! Combination lighting with two warning colors in a single Super-LED module for just about any color combination you need.
! Optional DUO Super-LED Traffic Advisor™ lets you change your primary color warning lights to Amber Traffic Advisor mode.
! Available in both WeCan® and low current lightbars.
Whelen’s top performing Liberty lightbar just took another huge step forward with its TRIO technology available in four pre-configured combinations of Linear-LED® modules.
Warn the public, display your position, illuminate crucial work areas and secure the flow of traffic.This is the pinnacle of command vehicle lighting!
! Combination Tri-Color warning in a single Super-LED lighthead. Change it to fit your needs by flipping a switch!
! Change color sets to the front, rear and sides of the lightbar with the lighting combination you need.
! Select high intensity Red and Blue warning light with White illumination light when you need it. Or add an Amber Traffic Advisor to the rear for additional rear warning while keeping the White illumination lights available. For command posts, we offer these bars with steady Green corners.
! WeCan technology allows for all 18 wires on the control point to be easily programmed using a Windows® based software. This allows for individual control of each warning, take-down, and alley lighthead. The steady feature offers pre-configured group light control.
! Standard with LR11 Super-LED alley lights and take-down lights, with optional Dual LR11 take-downs or extra high intensity take-downs for even more powerful illumination.
! Available in pre-programmed WeCan Series.! All models exceed SAE requirements.
Package S3#1 Warning / Illumination
Package S3#3 Warning / Illumination Command
Package S3#2 Warning / Illumination & Traffic Control
Package S3#4 Warning / Illumination & Traffic Control Command
19
FREEDOM™ SUPER-LED® LIGHTBARSSuper-LED technology offered in five versions.
All Freedom Lightbars Feature! All models meet or exceed SAE Class 1 and California Title XIII
requirements.! Build your lightbar in any color combination with take-downs and
Super-LED modules in any position you want.! Optional Solar Panel compensates for parasitic draw from the vehi-
cle's computer, improves battery efficiency and extends battery life.! Clear outer lenses are standard, with optional individual color lenses.! Five year HDP® (Heavy-Duty Professional) warranty on LEDs.! Standard lengths: 44”, 50”, 55”.! Size: 3-3/4” (95mm) H x 12” (304mm) W x 44-3/8” (113cm)
or 49-3/4” (126cm) or 55-1/8” (140cm) L.
FL/FX Series, Low Current Switching with FL Series has standard corner modulesFX Series has extended corner modules
! Choose the 4 corner linear module lightbar, then add up to twelve linear Super-LED modules for a total of sixteen modules.
! Five or six ultra high intensity Linear Super-LED Traffic Advisor™. ! Each Super-LED lighthead is driven by an all electronic module
that provides proper input power and choice of flash patterns. ! Scan-Lock™ allows you to scan through multiple flash patterns
and lock in the desired pattern. Every pair of lights can have its own unique pattern.
! Optional single or dual LR11 Super-LED flashing take-downs and flashing alley lights with 15° horizontal adjustment. See current price list for complete list of options.
! NFPA lightbars meet NFPA 1901 Lighting Standards with standard lengths of 55”, 60” and 72”.
FV/FW Series, Programmable withFV Series has standard corner modulesFW Series has extended corner modules
WeCan® Programmable Lightbar Series. “FV & FW” are similar to the FL & FX Series but includes an external interface unit, the WeCan electronic control module (ECM), communicates all lightbar operating functions. All functions are programmed with a PC via simple “pick & click, or drag” screens. Windows® based 2000, XP or later operating system required. USB input to the ECM from PC or laptop makes pro-gramming easy.
! Choose the “FV” standard 4 corner Linear Super-LED with 400 Series or single or dual LR11 alley light options or “FW” extended corner module with single or dual LR11 alley light option.
! Small cable allows for easier overall wiring and lightbar installation. ! Up to 18 different pre-programmed warning configurations can be
operated via customer-supplied switching to each of the 18 input wires to the ECM (default program pre-installed). Once the ECM is programmed, selection of these wires will allow for:
alternating, simultaneous & combo flash patterns.
Super-LED lightheads, excluding the four corner modules (required for SAE certification).
traffic arrow functions (left, right, split) does not require a Traffic Advisor control head.
! The WCC9 (substituted for the ECM) has 10 pre-programmed lightbar configurations accessible via dip switched located on the rear of the unit.
! WeCan Electronic Control Module can be deleted when a WeCan lightbar is being used with a Whelen CenCom Sapphire or CanTrol siren/light control system.
Freedom II SeriesFC Series, Programmable with! The Freedom II "FC" Series has all the great features of the FW
lightbars with extended corner modules plus independent control of upper and lower levels of each split or solid color lighthead.
To help you build your Lightbar, Whelen’s “WeCad™” build-a-bar program is available on our Website at: www.whelen.com
The only Patented Linear-LED ModuleOn the Market Today
Freedom FL with FLALY 400 Series alley light option Optional SOLARPNL solar
panel compensates for parasitic draw
Freedom FX with FXALF1D dual LR11 flashing alley
light option
®
Series WeCan Low Current
Corner Module
Bi-level Control of Lightheads
FL- Yes
Standard
-FX ExtendedFV
Yes -Standard
FWExtended
FC Yes
Optional WCC9 WeCan electronic control head
Optional FXTLS1D dual LR11 Super-LED flashing take-downs
FC2RRBB with optional dual FXTLS1 MR11 center take-downs and FLDJJ inboard options
FX2RRBB with optional FXTLS1D dual LR11 center take-downs, and FLDRR/FLDBB inboard options
FW2RRBB with optional FLTALN6L Traffic Advisor
20
CENTURY ELITE™ LIGHTBARSUser friendly, cost efficient LED lightbar.
Premium lighting at an off-the-shelf price! LED lightbar designed for long-life, reliable performance, ease of operation and serviceability.
! Low profile with clear outer lenses and compression fit gasket for moisture resistance.
! Four corner Linear-LED® modules provide full 360º coverage for SAE J845 Class I certification.
! Standard low current switching with Scan-Lock™ multiple flash patterns and pattern override feature.
! Extruded aluminum platform for rugged, long-life dependability.! Standard passenger side cable.
! Clip-Lock™ system allows easy access to lightbar for service or upgrade.! Available in Red, Blue, Amber or White.! Optional LED inboard modules, Traffic Advisor™, take-downs and
alley lights.! Includes mounting feet with hardware for optional vehicle specific
mounting straps.! For mounting strap options, see price list for strap kits.! Size: 2-1/4” (57mm) H x 8” (207mm) W (without mounting feet) in two
standard lengths of 44” (112cm) and 50” (147cm).
®
21
CE8BBRRwith optional inboard modules
Optional LR11 alley lights with standard mounting foot
CE4BBRR with optional LED Traffic Advisor
All Justice Lightbars Feature! Black polycarbonate base on an extruded aluminum platform for added
strength. ! Clear outer lens standard with a moisture resistant compression fit
gasket. Optional color lenses available.! Optional CON3™ or LIN6™ lighthead modules for outer sections.! Center section available with optional single LIN6, CON3, or two
LTR3 lightheads (for split color center section).! Corner modules available with 6 or 9 Super-LED linear modules.! Optional external high intensity flashing LED alley light pod and internal
LR11 warning light in alley position. ! Standard passenger side cable exit, driver side optional.! Service oriented. Change colors, upgrade or service lightbar in the field
with ease, simply remove six screws for outer dome or four screws for center dome to access any section of the lightbar.
! Replace any lighthead by removing one screw and single connector.! Wrecker Lightbar, standard 62” Competitor™ Series model with rear
work lights and brake/tail/turn lights.! Five year HDP® (Heavy-Duty Professional) warranty on LEDs.! Size" 2-1/4 (57mm) H x 12" (304mm) W x 44" (112cm) or
50" (127cm) or 56" (142cm) L.
The only Patented Linear-LED ModuleOn the Market Today
JUSTICE® SUPER-LED ® SERIES LIGHTBARSCost-competitive, designed for easy operation, upgrade and serviceability.
JV/JY Series, Programmable withJV Series has 9 Super-LEDs per corner module. JY Series has 6 Super-LEDs per corner module.WeCan Electronic Control Module (ECM) communicates all light-bar functions. Easily programmed by your computer via simple "pick & click, or drag" screens. Windows® based XP or later operating system required. USB input to the ECM from PC or laptop makes programming easy. Built-in Traffic Advisor™ control, independent flash pattern and phase control of each individual lighthead, optional LIN6, CON3 or LTR3 inboard modules, LR11 Super-LED flashing take-downs and alley lights with 15° horizontal adjustment. Optional WCC9 WeCan electronic control head replaces the stan-dard WeCan control module. Hand held or mounted to the dash or console, the WCC9 controls warning lights, take-downs, alley lights and Traffic Advisor from a single key pad.
JC/JE Series, Standard Current Switching withJC Series has 9 Super-LEDs per corner module. JE Series has 6 Super-LEDs per corner module.Front, rear and all bar operation control, Scan-Lock™ flash pattern control and pattern override feature. Optional LIN6, CON3 or LTR3 inboard modules, LR11 alley lights, LR11 take-downs, both with 15° horizontal adjustment or flashing take-downs, and optional Traffic Advisor with control head.
JY8RRBB with optional inboard lightheads
Standard mounting foot
JV8RRBB with optional inboard lightheads
2222
®®
Towman’s Century™ Series60” long lightbar includes built-in, rear facing brake/tail/turn signals and work lights. Four corner plus four inboard Amber lightheads (2 front/2 rear). Mounts with three adjustable slide bolts.Optional LIN12™ inboard modules available. Size: 2-1/4" (57mm) H x 12" (304mm) W x 60" (154cm) L.
Towman’s 9M Strobe Series60” long lightbar includes built-in, rear facing brake/tail/turn signals and work lights. Four Amber strobe lightheads (2 front/2 rear). Mounts with three adjustable slide bolts. Optional 2 or 4 halo-gen inboard modules with steady-burn priority mode available. Size: 3-3/4" (95mm) H x 10" (254mm) W x 60" (154cm) L.
Towman’s Freedom™ LightbarsFor the road recovery and towing industry; heavy-duty, long life, and low current draw. Standard with four corner Linear-LED® modules, rear facing halogen work lights and LED brake/tail/turn signals. Add pairs of Linear-LED modules as desired. Control lighting on front of bar, rear or both. Mounts with three adjustable slide bolts.Size: 3-3/4" (95mm) H x 10" (254mm) W x 60" (154cm) L.
Towman’s Liberty™ LightbarsLED heavy-duty, long life, and low current draw. Four corner LIN6 Super-LED modules, rear facing halogen work lights and LED brake/tail/turn signals. Optional Super-LED work lights available to make it an all LED lightbar. Add pairs of Linear-LED modules as desired. Control lighting on front of bar, rear or both. Mounts with four adjustable sliding brackets. Custom lengths available.Size: 2-1/2" (64mm) H x 12" (304mm) W x 60" (154cm) L.
Towman’s Justice® LightbarsStandard 62" Competitor Series with LIN6 Super-LED corner modules, rear Super-LED work lights and LED brake/tail/turn lights. Models available with CON3 modules. Front, rear and all bar operation control. Optional Scan-Lock™ flash patterns and override flash pattern feature. Moisture resistant compression fit gasket. Extruded aluminum platform with polycarbonate base. Mounts with three adjustable slide bolts. Size: 2-1/4" (57mm) H x 12" (304mm) W x 62-3/8" (158cm) L.
TOWMAN'S™ LIGHTBARSFor the Utility or Tow and Recovery professional.
CWOBAAACWOBAAA
FLOTAAAAFLOTAAAA
9M140W00
JFOBAAAA
SLOTAAAA with optional SLETAAAA
OUTER EDGE® LIGHTBARVehicle specific Super-LED® externally mounted warning.
! Two independent housings that are custom designed to mount on the outside of the upper rear window of the 2008-2012 Chevy Tahoe, and Suburban vehicles.
! Horizontal version mounts on upper rear window with eight LINZ6™ lightheads.
! Pillar version mounts vertically on sides of rear window with six LINZ6 lightheads and two Vertex™ lightheads.
! Available in Amber, Blue, White and Red with Clear non-fluted lenses. ! Fully encapsulated for superb moisture and vibration resistance. ! There are multiple Scan-Lock flash patterns for the flash mode, the
Traffic Advisor sequence allows for 4 flash patterns. ! Requires customer supplied switches or the optional Whelen TADCTL1
Traffic Advisor control head.
Tahoe shown with both horizontal mount and pillar mount.RP13RB pillar mount with color order number RP33000
OE13UR8 horizonatal mount with color order number 0ZP44000
23
®
9M Mini Edge® StrobeFour linear strobe model. Compact 28-1/4" size is ideal for single mounting or in pairs where room does not permit a full size lightbar. Permanent and magnetic mounting. Magnetic mount includes four 90 lb. pull magnets, 8' straight cord and cigar plug. Options include halogen take-downs and alley lights. Size: 3-3/4” (95mm) H x 10” (254mm) W x 28-1/4” (72cm) L.
Mini Justice® Super-LEDFour Linear6™ corner modules, up to four optional inboard CON3™ modules. Permanent, magnetic and magnetic/suction mounts. Permanent mount models have 15' cable, magnetic has 10' cord and cigar plug with On/Off switch and pattern selection switch. Optional CON3 light modules, LTR3™ module with LR11 Super-LED take-downs or LR11 Super-LED alley lights for permanent mount models only.Size: 2-1/4” (57mm) H x 12” (304mm) W x 23” (584mm) L.
Mini Ultra Freedom™ Super-LEDHigh intensity with only 70% of strobe current draw. Four cor-ner Linear Super-LED modules. Clear outer lens, optional color lens available. Parts change easily with screwdriver. Permanent or magnetic mounts available. Magnetic mount versions include four 90 lb. pull magnets, 8' straight cord and cigar plug. Options include up to four Linear-LED® modules for permanent or mag-netic mount models or two or four halogen lamps for permanent mount models. Options are take-downs, alleys and front and rear Linear-LED flashers. Size: 3-3/4” (95mm) H x 12” (304mm) W x 28-1/4” (717mm) L.
Mini Liberty™ Super-LEDFour Linear Super-LED modules available in permanent or magnetic mount. All permanent mount models include 15' straight cord and magnetic models include 10' straight cord and cigar plug. Magnetic mount versions include four 90 lb. pull magnets. Optional halogen take-down or alley lights available on permanent mount model. Clear outer lenses, optional color outer lenses. Size: 2-1/2” (64mm) H x 12” (304mm) W x 22” (558mm) L.
MINI LIGHTBARSVariety of Strobe, LED and Super-LED® lightbars to fit small spaces.
MJYBBRRM Magnetic mount
shown with optional CON3 modules
JDCR/JDCB
MC11PR Permanent mount
MC16SB Stud mount
MC16MB Magnetic mount
MC23VR Magnetic/suction
mount
9MMEDGEP Permanent mount
shown with optional 9MTD2 take-downs and 9MALY alleys
FT8RRBBPPermanent mount
shown with optional FLDRB
LT2RRBBM Magnetic Mount
NOTE: The use of a magnetic or magnetic/suction mounted lightbar on the roof of a vehicle in motion is not recommended, and is at the sole discretion and risk of the user.
Mini Century™ LEDPre-configured lightbars with premium lighting at an off-the-shelf price. Four Linear6™ corner modules with inboard TIR6™ modules. Multiple Scan-Lock™ flash patterns. Three model lengths to choose from with permanent, stud, mag-netic and magnetic/suction mounting. Permanent mount models have 12" pigtail, magnetic has 10' cord and cigar plug with On/Off switch and pattern selection switch. Extruded aluminum platform with compression fit gasket and Clip-Lock™ system allows easy removal of outer lens. Available in Red, Blue, Amber and split colors of Red/Blue and Amber/White. Size: 2-3/8” (61mm) H x 7-3/4” (197mm) W x 11-1/2” (292mm), or 16-1/2” (419mm) or 23-1/4” (591mm) L.
Mini lightbars are useful for vehicles where space is limited or where, due to the size of the vehicle, the use of two mini lightbars offers a strategic benefit over the use of a single lightbar.
24
®
MINI LIGHTBARSStrobe, Halogen and Super-LED®.
Responder "HD" Halogen SeriesBuilt for heavy-duty applications with rugged aluminum base plate to withstand shock and vibration. Two rotating halogen assemblies with 135 RPM motors and three year warranty on the motor assembly. 92,000 beam candle-power, 50 watt snap-in halogen bulb. Two rotators with diamond mirror. Magnetic or permanent mount. Permanent mount includes 6" pigtail. Magnetic mount versions include 10' straight cord and cigar plug. 12 VDC. Optional color fil-ter kit. Size: 5-1/8” (130mm) H x 17-1/4” (438mm) W x 6-5/16” (160mm) D.
Responder® "LP" Low Profile Super-LED SeriesLow-profile, mini lightbar with six Linear or CON3™ Super-LED modules provides 360° of high impact warning coverage and is only 3" in height. Lightbars have a built-in flasher to provide multiple Scan-Lock™ flash patterns including steady-burn. NEW DUO technology models have different color LEDs in the same module allowing lightbar to flash different colors. Available in either a rugged aluminum or polycarbonate base with a polycarbonate dome that is self-cleaning with advanced inner optics. Permanent mount includes 6" pigtail. Available in permanent, magnetic and magnetic/suction or mount. Magnetic and magnetic/suction mount versions include 10' straight cord and cigar plug with LED indicator On/Off switch and pat-tern control switch. Size: polycarbonate base is 2-7/8” (74mm) H and alumi-num base is 3-1/4" (83mm) H x 6-1/4” (159mm) W x 17” (431mm) L.
R10 Responder "HD" Super-LED SeriesHeavy-duty, Class 1, J845 certified mini lightbar with rugged alu-minum base is low current and rated for 100,000 hours of opera-tion. Includes six Super-LED dual level modules with built-in electronic flasher. Available in permanent mount, magnetic mount and magnetic/suction mount models. Permanent mount models have multiple Scan-Lock flash patterns, and includes 6" pigtail. Magnetic and magnetic/suction mount models have SignalAlert™ flash pattern and includes 10' straight cord with LED On indicator, On/Off switch and pattern control switch. Size: 5-1/8” (130mm) H x 17-1/4” (438mm) W x 6-5/16” (160mm) D.
R1LPHPS with R13300
R1LPVCA
R10HDPM
R10HDVA
R2HDMA
R2HDPA
NOTE: The use of a magnetic or magnetic/suction mounted lightbar on the roof of a vehicle in motion is not recommended, and is at the sole discretion and risk of the user.
Guardian™ Series Available in halogen and strobe. Mounting options are permanent, magnetic and magnetic/suction. Multi-color configurations available with Clear outer domes with inner color filters or inner color domes. Permanent mount models include 6" pigtail, magnetic mount and magnetic/suction models have 8' straight cord with new cigar plug with On/Off switch and fuse. Cigar plug has a connector so plug can easily be replaced. Three year warranty on rotators, two year warranty on strobe power supply and six month war-ranty on strobe flash tube. Size: 5-7/8" (150mm) H x 7" (178mm) D x 17-5/16" (440mm) L .
G1: Halogen, diamond mirror, 135 RPM rotators, 540 FPM total. 12 VDC.G2: Halogen, diamond mirror, 175 RPM rotators, 700 FPM total. 12 VDC.G7: Strobe, two remote strobe heads, built-in high intensity remote 40 watt output power supply and diamond mirror. 12/24 VDC.
G7 Magnetic mountG7MCRB
G1 Permanent mount G1PR
G2 Magnetic/suction mount
G2VA
RDLPPAB DUO Amber and Blue
shown in both color modes
25
®
INNER EDGE® SUPER-LED® SERIES LIGHTBARSUndercover virtually undetectable warning systems.
Customize your 3-LED Inner Edge with extra interchangeable lenes supplied with each unit. The TIR3 lens provides directional light.
The LIN3 and LIN6 has a clear non-fluted lens with proprietary collimator, for a wider 180° light spread.
TIR3 LIN3 LIN6
! Choose the housing to fit your vehicle and light modules you need.! Rugged housing fits snugly against the vehicle's upper front windshield,
upper or lower back window.! Choose from Linear-LED®, 3-LED or 6-LED Super-LED® modules.! Super-LED take-down lights, available on front units.! Super-LEDs are low current, vibration and moisture resistant for reliable
long life operation.! Easy installation. Front facing models mount to visor anchor points. Rear lower
facing uses the existing child-restraint brackets, both without drilling holes.! Requires customer supplied switches or control head, purchased separately.! Available in four safety colors.! Scan-Lock™ provides multiple flash patterns.! Order by choosing the housing model, and then add LED lighthead
modules and colors.! Five-year warranty on LEDs.
Low Profile Forward Facing Series! NEW XLP extra low profile, 3-LED models with low current switching,
removable lens for spot pattern, and low power. XLP housing is shorter and thinner, mounting closer to headliner and windshield for more interior room.
! Meets SAE and California Title XIII specifications.! Low profile two piece housings with 3-LED or 6-LED Series lightheads. ! Housings are available as single units, split two piece sets with individual
driver and passenger side units or as a single passenger side unit.! Each section houses either five lightheads or four lightheads and one
Super-LED flashing take-down.! Additional TIR3™ and LIN3™ lenses are supplied with 3-LED models for
customizing light dispersion.! Mirrored shroud on driver's side, is available on split models with eight and
ten lamps, makes it easy to view traffic lights and overhead signs.! Split Inner Edge fits late model Ford Expedition, Explorer, Police Utility
Interceptor, F150/250/F350, Fusion, Taurus and Police Interceptor Sedan; Chevy Caprice, Impala, Suburban, Tahoe, Silverado, Dodge Charger, and Durango police vehicles.
! One piece version fits Ford Expedition, Chevy Suburban, Silverado and Tahoe.
Inner Edge® Super-LED® Lightbars
Inner Edge’s unlit stealth appearance. Visible only when lighting is activated.
One piece unit shown secured up & away against windshield.
Patented see through mirrored shroud on driver side reduces flashback and makes it easy to view traffic lights and overhead signs.
Interior forward and rear facing undercover lighting systems that are virtually undetectable when not in use.
Rear Facing Lower Deck Series ! Available in LINZ6™ or LIN6™ Linear-LED modules. ! These models mount against the lower rear window.! Models available for Chevy Caprice and Impala; Dodge Charger;
Ford Taurus, and Police Interceptor Sedan.! Choose from six configurations:
™.
flasher on each end.
on each end.
Forward facing one piece unit.
Rear facing warning mounted on lower rear deck.
Comparison photo shows height difference between NEW extreme low profile XLP on right compared to standard model Inner-Edge on left.
For more information please request Inner Edge brochure.
Form# INNR0512
®
I37UF4P
IZ30UFZ
IX37UF5P
IZ38LRZ8
IZ35LRZ6
I06UF8
26
! All models include TACTLD1 control head except TAD Series.! For internal or external use.
500 Series 5mm LED Medium intensity 5-millimeter LED lamps provide highly effective warning and signaling at a more economical price. Size: 2-7/8” (73mm) H x 2-1/4” (57mm) D.Low profile Black housing.TAL65 Six lamp LED, 36” (91cm).TAL85 Eight lamp LED, 46-7/8” (119cm).
500 Series Linear-LED® & CON3™ Super-LED Front loading lightheads. Size: 2-3/8” (60mm) H x 2-3/8” (60mm) D.Low profile rectangular Black housing.TANF65 Six Linear-LED lamps, 34” (86cm).TANF85 Eight Linear-LED lamps, 43-1/8” (109cm).TANF85** Eight Linear-LED lamps, with two flashing end lamps, 43-1/8” (109cm).TADF6 Eight DUO Linear-LED lamps, 37” (94cm).TADF8 Eight DUO Linear-LED lamps, 45-1/8” (115cm).TACF85 Eight CON3 lamps, 43-1/8” (109cm).TACF85** Eight CON3 lamps, two flashing end lamps, 43-1/8” (109cm).
LINZ6™ Super-LEDSize: 1-3/4” (44mm) H x 2-3/16” (60mm) D. TAZ Series, Extreme low profile, Black housing.TAZ66 Six LINZ6 lamps, 23-1/4” (59cm).TAZ68 Eight LINZ6 lamps, 30-7/16” (77cm).TAZ86** Eight LINZ6 lamps, two flashing end lamps, 30-7/16” (77cm).TADP Series, LINZ6 Super-LED Dominator Plus™.For internal or external use. Requires optional switches or optional TADCTL1 control head.TADP6 Six LINZ6 lamps, 23-1/4” (59cm).TADP8 Eight LINZ6 lamps, 30-7/16” (77cm).TADP8** Eight LINZ6 lamps, two end flashing lamps, 30-7/16” (77cm).
Edge® Plus+™ Style 700 Series LED Size: 3-3/4” (95mm) H x 3-9/16” (90mm) W x 72” (183cm) L.Higher profile natural aluminum rectangular housing.TA870L For larger vehicles, the eight lamps are built into a housing that externally mounts flush to vehicle with slide bolts.
TRAFFIC ADVISOR™ - LED STRAIGHT STYLELow profile, low amp draw, high intensity LED and Super-LED ® lighting.
Control HeadsTACTLD1 for LED. Optional TADCTL1 for Dominator TAD models.
Slide bolt
Slide bolt
Thru-bolt end cap
Thru-bolt end cap
500 Series TIR6™ Super-LED Size: 2-7/8” (73mm) H x 2-1/4” (57mm) D.Low profile flat-style Black housing.TAM65 Six lamps, 36” (91cm). TAM85 Eight lamps, 46-7/8” (119cm).TAM85** Eight lamps, two flashing end lamps, 46-7/8”(119cm).Low profile rectangular Black housing.TA4437M Eight lamps in a two-piece housing. Size each piece: 22-3/4” (58cm).
TAD Series TIR3 Super-LED Dominator™, see page 6 for details.For internal or external use. Requires optional switches or optional TADCTL1 control head.TAD6 Six lamps, 23-1/4” (59cm).TAD8 Eight lamps, 30-7/16” (77cm).TAD8** Eight lamps, two end flashing lamps, 30-7/16” (77cm).
TIR3™ Super-LEDVariable mounting patterns via slide bolts. Flashing end lamps available in Amber, Red and Blue. Size: 1-3/4” (44mm) H x 2-3/16” (60mm) D. TAM Series, Extreme low profile, Black housing.Includes TACTLD1 control head.TAM63 Six lamps, 23-1/4” (59cm).TAM83 Eight lamps, 30-7/16” (77cm).TAM83** Eight lamps, two end flashing lamps, 30-7/16” (77cm).TAM8348 Eight lamps, 48” (122cm).
TADCTL1
TACTLD1
TAZ66/TADP6
TAZ86/TADP8
TAZ86RB/TADP8RB
TAM83/TAD8
TAM63/TAD6
TAM83RB/TAD8RB
TAM8348
TAM65
TAM85
TAM85RB
TANF85 / TADF8
TANF65 / TADF6
TANF85RB
TA4437M
TAL65
TAL85
TA870L
TACF85
TACF85RB
®
For optional mounting see Dominator section on page 6
Amber Traffic Advisor mode and color warning mode
in the same lightbar!
DUO™ Technology
Keyhole Mount
Slide bolt mount
27
TA870A Eight wide-angle halogen lamps in an Edge® Plus+™ housing which mounts flush to vehicle with slide bolts. Custom lengths available. Size: 3-3/4” (95mm) H x 3-9/16” (90mm) W x 72” (183cm) L.
! Meets MUTCD2000 specifications. (When mounted on appropriate backboard).! Four operating modes; left, right, split and flash. ! Eight programmable flash patterns.! Removable arrowheads for ease of storage and shipping.! All include cable and connectors.! 25’ of 16-conductor cable supplied.! Extruded aluminum housing with Black finish.
TA8852H Sixteen (5” x 2”) lamps, two sections. Size each piece: 23-1/4” (590mm) H x 5-1/4” (133mm) D x 27-1/2” (698mm) L.
! All models include control head.! Relampable halogen lightheads.! Four operating modes: left, right and split center-out directional sequences and flash.
TRAFFIC ADVISOR™ - HALOGEN STRAIGHT STYLE
TA1664H Sixteen Halogen (6” x 4”) lamps, one piece. Size: 36-1/2” (927mm) H x 4” (102mm) D x 5’, 6’, 7’ or 8’ L.TA1660L Sixteen LED (6” x 4”) lamps in serial communications, one piece. Uses small diameter wires: 2-C 22 gauge for control and a 2-C 10 gauge power cable. Size: 36-1/2” (927mm) H x 4” (102mm) D x 5’, 6’, 7’ or 8’ L.
TA637A Six lamps in a rectangular aluminum housing, 33” (83cm) L.TA837A Eight lamps in a rectangular aluminum housing, 43-1/4” (110cm) L.
TA1252L Twelve (5” x 2”) lamps, one piece. Size: 16” (406mm) H x 5-1/4” (133mm) D x 48” (122cm) L. TA1652L Sixteen (5” x 2”) lamps, one piece. Size: 23-1/4” (590mm) H x 5-1/4” (133mm) D x 48” (122 cm) L.
500 Series LEDLower profile extruded aluminum Black housing.
500 Series HalogenLower profile extruded aluminum Black housing.
600 Series LED & HalogenHigher profile extruded aluminum Black housing.
500 Series HalogenRectangular extruded aluminum Black housing. Size: 2-7/8” (73mm) H x 4-7/16” (113mm) D.
Higher profile rectangular natural extruded aluminum housing.
TA637A
TA837A
TA870A
TA1252L
TA8852H
TA1660L
TA1664H
TRAFFIC ADVISOR™ - ARROW STYLEHigh profile, Super-LED®, LED and Halogen.
Control HeadsTACTRL1A for halogen and TACTLD1 for LED.
Slide bolt
TACTRL1A TACTLD1
®
Swivel foot
Slide bolt
TA1652L
28
HHS2200Remote siren with hand held controller and user definable functionality!Now you can easily control all light and siren functions from this compact hand held controller with built-in microphone. Moisture-resistant rubberized, backlit push-buttons including progressive three-position push-button lighting con-trol. Microprocessor controlled and rated for one or two 100 watt speakers. Hands-Free operation. Wail, Yelp, Piercer, Manual Siren and Airhorn tones are standard. 37 tones to choose from including Mechanical Siren tone. 6’ coiled cord microphone cable. 20’ of interconnect cable included.Size: Amplifier: 2-1/2” (64mm) H x 8” (203mm) W x 7” (184mm) D.Control Head: 5-5/16” (135mm) H x 2-1/4” (57mm) W x 1-1/8” (28mm) D.
SIREN AMPLIFIERSHand held and self-contained models.
SIREN AMPLIFIERSHand-held and self-contained models.
Epsilon™
Lowest cost, full function electronic sirens we offer. Meets SAE Class A sound requirements when used with most 100 watt speakers. Hands-Free and Public Address operation, nine Scan-Lock siren tones and horn ring override capability with real time diagnostics. California Title XIII ready. LED backlighting, PA volume knob, noise-cancelling microphone, On/Off switch, manu-al button and 7-position rotary switch. Pre-wired with quick dis-connect plug for easy service and prompt replacement.
EPSL1: 100 watt output power. Size: 2-1/4” (57mm) H x 5-7/8” (149mm) W x 5-3/4” (146mm) D.
EPSL2S6: Two 100 watt amplifier with 6 On/Off toggle switches, operates up to two 100 watt speakers.Size: 3-1/4” (83mm) H x 6” (151mm) W x 5-5/8” (83mm) D.
EPSL2S9: Two 100 watt amplifier with 4 position slide switch and 6 On/Off toggle switches, operates up to two 100 watt speakers. Size: 3-1/4” (83mm) H x 6” (151mm) W x 5-5/8” (83mm) D.
Gamma2™
Low cost siren that provides a wide range of features and meets SAE Class A sound requirements when used with most 100 watt speakers and is California Title XIII compliant. Multiple Scan-Lock™ siren tones. Two On/Off 20 amp auxiliary rocker switches with LED "On" indicators. Stand-by button provides Hands-Free operation/override from horn ring. Tone button activates Wail tone and may be programmed for other tones. Manual button generates a variety of tones as pre-selected by user, up to 3 tones. Horn button generates an Airhorn tone. Easy to install with standard bail-strap mounting bracket. Two year warranty.Size: 2-1/4” (57mm) H x 4-1/4” (109mm) W x 5-3/8” (137mm) D.
WSSC30/WSSPA30Combination siren and speaker in a single compact unit. Heavy-duty compact 30 watt amplified siren ideal for use on motorcycles, ATVs, snow mobiles, etc. Hands-Free operation for Wail and Yelp tones, lets you keep both hands steering while accessing warning tones. Choose from four modes of operation and ten tones. Rugged housing plus water-resistant connectors for vibration and moisture resistance. Mounts with two way "L" bracket. Requires customer supplied switches. Model WSSPA30 includes Public Address and plug-in microphone.Size: 4-5/16” (110mm) H x 5-7/16” (138mm) W x 4-5/8” (118mm) D.
®
EPSL1EPSL2S9
WSSPA30
EPSL2S6
295SDA1 SIREN CONTROLLERDual tone remote, competitively priced for siren and power control.
SIREN FEATURES ! Two independent siren amplifiers in one housing,
each can drive one 100 watt siren speaker.! Short circuit and under/over voltage protection.! LED indicators for speaker and input voltage
diagnostics.! California Title XIII compliant tone set-up.! 20 programmable tones with Radio Repeat and PA.! Horn-ring transfer relay built-in.! Siren “in use” video recorder icon appears on video
recording to confirm siren was in use.! Siren disable (Park Kill) control input.! Two year warranty.
CONTROLLER FEATURES! Eleven programmable power distribution switches.! Three 20 amp relay controlled outputs with built-in
fuses.! Eight 10 amp relay controlled outputs with built-in
fuses (two of them include a choice of independent inputs or the standard power bus switching).
! Two wire Traffic Advisor™ control.! All switches can be programmed to activate any
combination of the relay outputs.! Any light control switch can be programmed to
activate any of the 8 momentary switches.! Programmed Momentary switches.! Copy siren/switch configuration to another unit.! Easy reset to factory default settings.
295SDA1
! Size Controller: 3-1/2” (89mm) H x 6-7/8” (175mm) W x 1-1/4” (32mm) D.
! Size Amplifier: 2-1/4” (57mm) H x 8-5/8” (219mm) W x 7-1/8” (180mm) D.
! Weight: 5.25 lbs. (2.38kg)
29
! AMECA certified to meet Class A requirements of SAE, KKK1822 and California Title XIII specifications. (Certifications are based on siren amplifier and speaker combination).
! Can run one 100 watt or two 100 watt speakers.
! Hands-Free operation, Real-time Diagnostix™.
! Adjustable microphone and radio repeat volume controls.! Standard features include Manual, Wail, Yelp, Airhorn and Piercer Tones.! SI TEST®, fully diagnostic silent test of amplifier and speaker(s). ! Adjustable intensity backlighting in soft LED non-glare Green.! Exclusive five year, HDP® Heavy-Duty Professional warranty.
295SLSA1Full function plus radio repeat and PA. Multiple Scan-Lock™ siren tones. Backward compatible with 295HFSA1. Pre-wired unidirectional microphone. Size: 2-1/2” (63mm) H x 6” (152mm) W x 7” (178mm) D. Weight: 4 lbs. 10 oz. (2.1kg)
295HFS2Full function siren with flush mount control head with remote amplifier. Control head size: 2-7/8” (73mm) H x 6-1/4” (159mm) W x 2-3/8” (60mm) D. Weight 1 lb., (.5kg) Amplifier size: 2-3/8” (60mm) H x 6” (152mm) W x 7” (178mm) D. Weight: 3-1/2 lbs., (1.6kg)295HFS2X Same as 295HFS2 with dual amplifiers, meets California Title XIII specs.
295HFS3Full function siren with surface or under-dash mount control head with remote amplifier. Control head size: 2” (51mm) H x 6” (152mm) W x 2-3/8” (60mm) D. Weight: 4 lbs., (1.8kg) Amplifier size: 2-3/8” (60mm) H x 6” (152mm) W x 7” (178mm) D. Weight: 3-1/2 lbs., (1.6kg)
295HFS4Full function siren with nine low current switch controls for lighting functions. Surface or under-dash mount control head with remote amplifier. Four position slide switch, five push-on/push-off switches and one momentary switch. Directly compatible with Edge® 9M, Liberty™ and Freedom™ lightbars with low current switching. Control head size: 3-3/8” (86mm) H x 6” (152mm) W x 2-3/8” (60mm) D. Weight: 1-1/2 lbs., (.7kg) Amplifier size: 2-3/8” (60mm) H x 6” (152mm) W x 7” (178mm) D. Weight: 3-1/2 lbs., (1.6kg)
295HFSA5Full function siren with nine switch light control and low current switching with park kill, timed out relay and California tones. Size: 3-5/16” (84mm) H x 6” (152mm) W x 8-3/8” (213mm) D. Weight: 4-1/2 lbs., (2kg)
295SLSA6Electronic siren and lights controller with 9 individually programmable switch-es. Includes multiple Scan-Lock siren tones and hard-wired microphone. Meets SAE J1849 and California Title XIII requirements. Size: 3-5/16” (84mm) H x 6” (152mm) W x 7” (178mm) D. Weight: 4-1/2 lbs., (2kg)
295HFSDASecond 100/200 watt amplifier and interconnect kit for dual amplifier operation for use with 295HFS2, 295HFS3 or 295HFS4 systems. Amplifier size: 2-3/8" (60mm) H x 6" (152mm) W x 7” (178mm) D. Weight: 3 lbs., (6.6kg)
295HFSC9Two 100 watt, dual or mono siren, 8 programmable operating profiles, removable microphone, park kill siren shutdown, radio repeat, mechanical siren and airhorn tones, Title 13 compliant, short circuit protection. Size: 2-1/4" (57mm) H x 6" (152mm) W x 7” (177mm) D. Weight: 4 lbs., 7 oz.
295 SERIES SIREN AMPLIFIERSA model for every need.
295HFSA7Economical six function dual remote siren with radio repeat and PA operates two 100 watt speakers. Surface mount control head. Operates in dual or mono modes. External dip switch selectable modes of operation.Size control head: 2-1/2” (64mm) H x 6-7/8” (175mm) W x 2-3/4” (70mm) D. Amplifier size: 2-1/4" (57mm) H x 9-1/8" (232mm) W x 8” (203mm) D.
295SL100Competitively priced. Full function siren plus radio repeat and public address. Operates up to two 100 watt speakers. Includes Hands-Free operation and Scan-Lock siren tones (patent pending). Self-contained unit for under-dash mounting. Hard-wired microphone or removable microphone models available. 24 month warranty. Backward compatible to the original 295HF100 and WS2100 Series.Size: 2-1/2” (64mm) H x 6” (152mm) W x 5-1/2” (138mm) D. Weight: 3 lbs. 12 oz. (1.7kg).295SL101Similar to 295SL100 except includes a removable microphone and volume control knob.
®PROFESSIONAL
HEAVY DUTY
®
30
SIREN AMPLIFIERS & AIRHORNS Economical and water resistant models.
Beta™ SeriesEconomical, four tone, 100 watt remote siren amplifier with radio repeat and public address. Hands-Free operation. Meets Class A requirements with most 100 watt speakers. PA override in all func-tions. Use with compact BETA1 and BETA2 control heads or custom-er supplied switching, purchased separately. Dip switches on rear of amplifier allow easy set-up and configuration to most local require-ments without special ordering. Optional flush mounting bracket for BETA2 Series control heads.BETA112R Remote 12 VDC siren amplifier with PA and radio repeat. Size: 2-3/8" (60mm) H x 7-1/8" (181mm) W x 5-1/2" (140mm) D. Weight: 2 lbs., 7oz. (1.1kg)BETA1 Control Head with noise canceling microphone. 15' cable. Requires BETA112R siren amplifier, sold separately. Size: 2" (51mm) H x 4-1/2" (114mm) W x 2-1/2" (64mm) D. Weight: 1 lb., (.45kg)BETA2 Fully encapsulated surface mount control head is mois-ture resistant. Sealed toggle and rotary switches. Removable noise canceling microphone. 20' cable and connectors. Requires BETA112R siren amplifier, sold separately. Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W x 2" (51mm) D. Weight: 1 lb., 4 oz. (.6kg)
BETA1
BETA112R
BETA2
Power Airhorn™ ModelsPerfect for volunteer fire personnel, security, escort and undercover vehicles. Delivers 100 watts of power to a 100 watt siren speaker (purchased separately). Housing mounts in trunk, under the seat or other remote location.PAH112 Power Airhorn 100 watt amplifier, 12.8 VDC. Size: 2-1/2" (64mm) H x 5-7/8" (149mm) W x 6-3/4" (171mm) D. Weight: 2.5 lbs. ( 1.14kg)PAP112 Power Airhorn Plus™ 100 watt amplifier with microphone, 12.8 VDC. Size: 2-1/2" (64mm) H x 5-7/8" (149mm) W x 6-3/4" (171mm) D. Weight: 3 lbs. (1.36 kg) PAPEXT15 Optional 15’ extension cable for PAP112 microphone.PAP112
PAH112
Alpha™ Series Economical, four tone, 100 watt siren. For applications not requiring public address or radio repeat. Self-contained and remote amplifier models. Meets Class A requirements with most 100 watt speakers. Hands-Free operation. Dip switches on rear of amplifier allow easy set-up and configuration to most local requirements without special order-ing. Optional switch panels or customer supplied switching may be used with ALPHASL.
ALPHA12S Self-contained 12 VDC siren. Size: 2-1/2" (64mm) H x 6" (152mm) W x 4-5/8" (117mm) D. Weight: 2 lbs., 4 oz. (1kg).ALPHASL Remote 12 VDC selectable four tone Hands-Free siren amplifier for a single 100 watt speaker. Requires separate switches, sold separately. (Replaces ALPHA12R) Size: 2-1/4" (54mm) H x 5" (127mm) D x 4-3/4" (120mm) L Weight: 2 lbs., 7oz. (1.1kg)
ALPHA1-5 Choose from one to five optional switches for use with ALPHASL.
ALPHA12S
ALPHASL
ALPHA SWITCHES
WPA Series Water-resistant siren amplifiers and control heads for motorcycle and marine use. Four tone siren plus public address and radio repeat. 100 watt output. Hands-Free operation. WPA Series amplifiers work with WPA Series control heads or customer supplied controls. Fully encapsulated, control heads feature sealed toggle, rotary and push-button switches plus removable noise canceling microphone.WPA112 Remote 100 watt amplifier, 12 VDC. Weather tight, extruded aluminum housing for rugged environment. Size: 2-7/8" (73mm) H x 3-1/2" (89mm) W x 7-7/8" (200mm) D. WPA1 Control head with three position toggle switch enables control for siren only functions or combined light and siren operation. Includes handlebar mounting bracket, 7-1/2’ cable and connectors. Requires WPA112 siren amplifier, sold separately. Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W x 2” (51mm) D. WPA2 Control head with flush mounting bracket, 20’ cable and connectors.Requires WPA112 siren amplifier, sold separately. Size: Cutout: 1-3/4" (44mm) H x 4-1/4" (108mm) W. Bracket: 2-1/2" (64mm) H x 5-1/4" (133mm) W. WPA3BM Bail mount control head with waterproof switches and microphone jack for marine applications. Includes removable microphone and 20’ connection cable. Requires WPA112 siren amplifier, sold separately. Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W. WS321 100 watt, siren for Harley-Davidson® wiring harness. Optional microphone available. Size: 2-7/8" (73mm) H x 3-1/2" (89mm) W x 7-7-8" (200mm) D.
WPA2
WPA112
WPA1
WPA3BM
®
31
CENCOM SAPPHIRE™ SIREN SYSTEMIntegrated siren and light control system.
CenCom Sapphire adds an integrated WeCan® serial port for connecting your Whelen WeCan series lightbar directly to the Amplifier Control Module. Just plug in and go!
Indicator LEDs have been added to each output creating a simple, highly visible way to facilitate troubleshooting shorted or broken connections in your vehicle’s wiring.
Fuses and connections are easily accessible without having to use any tools or remove any covers. All high current outputs are fused for your convenience.
New, heavy-duty power and output connectors handles rough treatment without damage or accidental disengagement and are easily accessible on the front face of the ACM.
Connections have been consolidated into fewer connector housings.
Configuration programming is easier than ever with newly redesigned CenCom Sapphire software. It retains the highly regarded simplicity of our previous CenCom software, with new features and added flexibility; including the ability to configure your Whelen WeCan lightbar!
! Control your warning lights, siren and Traffic Advisor™ functions from a single keypad.! Two systems, each with five control heads to choose from.! Solid-state outputs: one 40-Amp, two 20-Amp, four 10-Amp, and four 250-milliAmp.! Relay output: one 10-Amp Dry Contact Relay.! Lightbar: 1 Phoenix style connector for a WeCan series lightbar.! Inputs: four positive or ground activated inputs, including a horn ring input.! Easy to configure using the included CenCom Sapphire Windows application.! Configured programs may be extracted, modified and stored for ease of service and reuse.! A USB port on the Amplifier Control Module provides easy access for programming. ! Easy to operate control heads.! Hands-Free” siren operation.! Each button is individually customizable.! Brightly backlighted push-buttons include over 230 standard function labels.! Control head backlighting can be easily turned on or off for high visibility on patrol.! Rugged, aluminum-housed Amplifier Control Module is field-serviceable.! Operates one or two 100-Watt siren speakers.! Most systems include unidirectional public address microphone with plug-in connector
and 20’ cable except hand held control head model.! Includes all pigtails and connectors.! Five-year warranty.! Meets or exceeds all applicable SAE, California Title XIII and NFPA requirements with
various Whelen speakers.! Size: Amplifier: 3-1/8” (79mm) H x 6-3/4” (171mm) D x 8-1/4” (210mm) L.
CCSRN3: 3-Position slide switch and 18 push-button control head with amplifier control module with pigtails, bail bracket mount. (Replaces CCSRN2). Control head size: 3-1/2” (89mm) H x 1-5/16” (33mm) D x 6-7/8” (174mm) L.CCSRN32: 3-Position progressive push-button switches and 18 push-button control head with amplifier module with pigtails, bail bracket mount. Control head size: 3-1/2” (89mm) H x 1-5/16” (33mm) D x 6-7/8” (174mm) L.CCSRN33: Single master push-button switch and 18 push-button control head with amplifier module with pigtails, bail bracket mount. Control head size: 3-1/2” (89mm) H x 1-5/16” (33mm) D x 6-7/8” (174mm) L.CCSRN34: 3-Position slide switch and 6 push-button control head with amplifier module with pigtails. Control head size: 2-1/2” (64mm) H x 7/8” (22mm) D x 4-3/16” (106mm) L.CCSRN35: 3-Position progressive push-button switches and 9 push-button hand held control head with amplifier module with pigtails and 20' cable. Control head size: 5-5/16” (135mm) H x 1-1/8” (29mm) D x 2-3/16” (56mm) L.CCSRNTA3: Same as CCSRN3, with Traffic Advisor module (Replaces CCSRNTA2).CCSRNT32: Same as CCSRN32, with Traffic Advisor module.CCSRNT33: Same as CCSRN33, with Traffic Advisor module.CCSRNT34: Same as CCSRN34, with Traffic Advisor module.CCSRNT35: Same as CCSRN35, with Traffic Advisor module.CCTRIM: Optional trim ring for semi-flush mounting of control head. Bail bracket mount
CCSRN3
Amplifier
Microphone
Optional CCTRIM for semi-flush mount
SAPPHIRE
®
CCSRN32
CCSRN33
CCSRN34
CCSRN35
32
®
Create unified light and siren warning by incorporating every light and siren on your cruiser into custom programmed configurations. Your warning system becomes your strongest ally for safety because you can pre-configure the proper response to any situation before it happens…before timing is critical …before an emergency or accident requires instan-taneous judgment. Vehicle integration provides added capability to your light and siren package such as: program and control all the lighting, traffic arrows and siren functions in your vehicle, flash pattern synchronization, canine alarm and temperature monitor control, radar and camera activation, door or trunk opening, window down, gun lock, ignition disable and much more. The abilities of CanTrol WC are limited only by your imagination...Configuration is easy with a Windows® based computer program. USB port allows for easy program transfer from your computer to the amplifier/con-trol module.
FEATURES! Full function amplifier/control module.! Program and control all the lighting, traffic arrows and siren functions in
your vehicle.! All outputs have both short circuit/over-current protection.! WeCan® lightbar plugs directly into the amplifier/control module and is
programmed by the CanTrol software.! Inputs for five different style control heads (ordered separately).! Three analog inputs for temperature sensor, ambient lighting, etc.! Integrated battery voltage monitor.! Supports one or two 100 watt speakers.! Programmable for Hands-Free operation.! 161 synchronizable, variable-phase, programmable flash patterns.! Optional expansion module, up to two, allows for 16 additional 2-1/2
amp outputs per module, plugs directly into the WeCan port, for a total of 75 outputs.
! Over 45 programmable siren tones.! Includes PA and radio repeat functions.! Built-in system shut down allows system to operate for up to four hours
after vehicle is turned off.! Redesigned housing with integrated diagnostic LEDs for quick trouble-
shooting.! Optimized software.! Easy to configure using Windows application program.! Pre-configured programs may be modified and stored for ease of ser-
vice. Easily extract your custom program and transfer to other vehicles.! A USB port in the amplifier/control module allows easy access for
programming.! Power and input/output cabling with connectors, standard.! Five-year HDP® Heavy-Duty Professional warranty.! Each output has diagnostic indicator. ! Eight inputs for customer supplied external switches; four for use on
positive or ground switching, and four for use on positive switching only.! Thirty-two 2-1/2 amp outputs.! Three low current 1/4 amp outputs.! Eight programmable 10 amp outputs.! Three Diagnostix™ system indicators.! Traffic Advisor™ module for traffic arrows that utilize a 9C cable eliminat-
ing the use of a traffic arrow controller.! WeCan lightbar Traffic Advisor can be synchronized with remote Traffic
Advisors that utilize a 9C cable.! Meets or exceeds all applicable SAE, California Title XIII and NFPA
requirements with various Whelen speakers, control heads and light-heads.
! Amplifier Size: CANWC1: 3-1/8” (79mm) H x 7” (194mm) D x 9-1/2” (241mm) L.
Control Head Size: CANCTL1-3: 3-1/2” (89mm) H x 1-5/16” (33mm) D x 6-7/8” (174mm) L. CANCTL4: 2-1/2” (64mm) H x 7/8” (22mm) D x 4-3/16” (106mm) L. CANCTL5: 5-5/16” (135mm) H x 1-1/8” (29mm) D x 2-3/16” (56mm) L.
CANTROL™ WC SIREN SYSTEM Light and siren system for total vehicle integration and control.
MODELS CANWC1: Includes standard amplifier/control module with sixteen, 2-1/2 amp outputs, three low current 1/4 amp outputs, and control head of choice. Traffic Advisor™ module, eight total programmable outputs (four 10 amp pos/neg and four 10 amp pos only), an additional thirty-two 2-1/2 amp outputs, three Diagnostix™ indicators.
CONTROL HEADSCANCTL1: Includes 3-position slide switch, eighteen push-buttons, microphone and microphone extension cable.CANCTL2: Includes 3-position progressive light/siren control, eighteen push-buttons, microphone and micro-phone extension cable.CANCTL3: Includes a single master emergency switch, eighteen push-button light/siren controller, micro-phone and microphone extension cable.CANCTL4: Includes 3-position slide switch, six push- buttons, microphone and microphone extension cable.CANCTL5: Includes a hand-held combination micro-phone and controller, 3-position progressive light/siren control, nine push-buttons and microphone extension cable.
OPTIONSCANEM16: 16 output expansion module.CANLITEB: Light sensor in Black housing.CANLITEC: Light sensor in Chrome housing.CANTEMPB: Temperature sensor in Black housing.CANTEMPC: Temperature sensor in Chrome housing.
CANTRL1 CANTRL2
CANTRL3CANTRL4
CANTRL5
CANEM16
Sold by AuthorizedDistributors Only
CANWC1
33
®
SIREN SYSTEM & SPEAKERSHigh efficiency output siren speakers.
SA340TSPlastic rectangular speaker horn. Size: 5” (127mm) H x 8” (203mm) W x 7” (178mm) D. Weight: 11 lbs., (5kg)
SA340STSCompact, round aluminum speaker horn. Size: 5-5/8” (143mm) H x 5-5/8” (143mm) W x 6-13/16” (173mm) D. Weight: 11 lbs., (5kg)
SA31I01P/SA31I01DFor under bumper and chas-sis mounting on International 4300/4400. Driver and pas-senger side models available.
SA122FMP Projector™High-performance cast aluminum, multi-port 100 watt RMS speaker. Available with mounting flange for flush mounting on emergency vehicles. Polished finish. Size with flange: 7-7/16” (189mm) H x 7-7/16” (189mm) W x 5-3/16” (132mm) D. Weight: 12 lbs., (5.5kg)
SA32C06 UnderPro™ dual speaker for 2006-08 Chevrolet Express Van. Size: 5-1/2” (139mm) H x 32” (812mm)W x 9-1/2” (241mm) D. Weight: 18 lbs. (8.18 kg)
SA314A, SA314B, SA315P Projector SeriesNarrow, high performance, multi-port 100 watt speaker provides ease of mounting. Installs to vehicle’s cross member in minutes. Available in non-corrosive natural cast aluminum, Black cast aluminum or nylon composite housing. OSHA 1910.95 compliant. Exceeds CA Title XIII, Class A and SAE J1849 requirements. A wide variety of optional mounting brackets available. Consult current Price List for details.SA314 Size: 6-3/16” (156mm) H x 6-7/16” (163mm) W x 3-1/8” (79mm) D.SA315 Size: 6-1/2” (165mm) H x 6-1/2” (165mm) W x 2-7/8” (74mm) D.
SA350M100 watt speaker for motorcycle mounting. Heavy gauge, polished aluminum horn. Chrome plated, heavy-duty steel bracket with “U” clamps for crash bar mounting. Size: 6-7/8” (175mm) H x 7-5/16” (186mm) W x 6-7/8” (175mm) D. Weight: 11 lbs., (5kg)
Howler™ Siren & Speaker System A secondary add-on to your one 100 watt or two 100 watt siren amplifiers, Howler provides low frequency tones to penetrate other vehicles, alerting drivers and pedestrians of your approach. Howler adds a customer pro-grammable 8 to 60 second penetrating burst. Select from 3 frequency bands and 8 tone durations. Howler is the only low frequency tone siren that can cancel siren tones by either of two external controls which allows the opera-tor to stop the siren and receive urgent radio transmission. Works with most siren amplifiers and any sweeping tone, plus Hi/Low and electronic mechanical tone. Models available with one or two speakers and your choice of vehicle brackets. (Consult current Price List for details)Size: Speaker without bracket: 7-1/4" (184mm) Dia. x 8-3/8" (213mm) L. Amplifier: 2-1/4" (54mm) H x 5" (127mm) D x 4-3/4" (120mm) L.
SA315P
SA314B
SA314A
Models with one speaker for specific
police vehicles
®
PCCS9RWHigh current with built-in relays, for lightbars that use stan-dard switching. Connects to most lightbars and auxiliary warn-ing equipment without the use of separately mounted relays or relay boxes. Front panel programming slide switch with three 20 amp relays. Six front panel programmable push-buttons with 20 amp relays for secondary lightbar functions. Momentary contact for strobe low power, trunk lock or gun lock. Backlighted legend windows, 72 press-on legend tabs. Size: 1-1/8” (51mm) H x 6-1/4” (159mm) W x 6" (152mm) D. Weight: 1 lb., 12 oz. (794gr). Replaces PCCS9R.
PCC8R - Eight function Power Control CenterEight position key pad with remote relay box, ideal for DOT, Tow and Wrecker vehicles. Eight function control center with three 20 amp relays and five 10 amp relays. Not programmable. Diagnostic feedback for relay confirmation. Push-On/Push-Off or momentary activation. LED backlighted membrane switches are designed with a solid rubber overlay for moisture resistance. 12 volt or isolated switching. Ignition control available via dip switch. 70 amps maximum. Size: Control head: 2-1/2” (64mm) H x 4-3/16” (106mm) W x 7/8" (22mm) D. Size: Relay box: 1-1/4” (32mm) H x 7-1/4" (184mm) W x 4-3/4” (121mm) D.
WCC9 - WeCan® Electronic Control HeadFor use with Liberty™, Freedom™ and Justice® WeCan lightbars. Hand held or mounted to the dash or console, the WCC9 replaces the standard ECM (Electronic Control Module) and is easy to program, install and control. This control head controls warning lights, take-downs, alley lights and Traffic Advisor™ from a single key pad. Control lightbar functions using six pre-programmed control buttons plus a 3 position slide switch. 10 pre-pro-grammed popular warning configurations via four dip switches located on the rear of the controller. No computer required to program control head. May be used with most existing WeCan lightbars, consult Price List for complete details. LED backlighted push-buttons, function labels are included. Size: 2-1/2” (64mm) H x 7/8" (22mm) D x 4-3/16” (106mm) W.
PCC4W / PCC6W / PCC10WCompact design with rocker style single pole/single throw switches, rated at 25 amps peak, with active LED indicators that light up to indicate function in use. Individual spade-type fuses conveniently located on rear mounted fuse strip. Ignition con-trolled backlighted legend windows for easy visibility in any light. Backlight circuit can be connected to vehicle dimmer switch to control backlight intensity. 72 commonly used press-on switch function label legend tabs standard. Black epoxy-finished, steel housing. Common ground post for ease of installing. 12 VDC. Size without bail bracket: PCC4W: 2-1/4” (57mm) H x 3” (76mm) W x 4” (102mm) D. PCC6W, PCC6W1, PCC10W, PCC10W1: 2-1/4" (57mm) H x 6" (152mm) W x 3-9/16" (91mm) D.PCC4W: Four 25 amp switches.PCC6W: Six 25 amp switches.PCC6W1: NEW Five 25 amp switches and a Momentary Switch.PCC10W: Ten 25 amp switches.PCC10W1: NEW Nine 25 amp switches and a Momentary Switch.
SWITCH PANELSSwitch panels with 1-4
switches of your choice. Available in SPST, SPDT and DPDT.
Switches have 15 amp contacts.
SWITCHES AND CONTROL CENTERSA variety of switches and control centers are available to match your application.
! Low profile, extruded aluminum housing, Black finish.! Units with slide switches have LED “ON” indicator above slide switch positions and push-buttons.! Backlighted legend windows for the push-on/push-off and momentary switches.! Legend tabs included.! Adjustable bail brackets.
PCCS9NPProgrammable low current control switch center for use with Freedom, Liberty, Justice WeCan, Legacy™ and other lightbars with low current switching. Three position slide switch, six push-on/push-off buttons for secondary lightbar functions. Size: 2”(51mm) H x 6-1/8” (156mm) W x 3-5/8” (92mm) D. Weight: 1 lb., 12 oz. (794gr). Replaces PCCS9N and PCCS9N1.
PCC6WPCC6W1
PCC4W
34
PCC10WPCC10W1
®
Look for the icon throughout this catalog.
It identifies products that have either been designed specifically for
motorcycle applications, or are suited for motorcycle use.
Motorcycle Warning SystemsHarley-Davidson® motorcycle systems provide maximum protection to the front, rear and sides of your bike keeping you visible at 360°. Warning package includes Black molded touring box with left hand, right hand or rear opening, adapter plate to mount to 2009-2012 Harley Police Package, separation plate, 12 VDC receptacle, terminal block with fuses, one Strip-Lite™ Series LED brake/tail/turn, flasher, six M4 Series dual level Super-LED light-heads in single or dual color LEDs mounted on the touring box. For White boxes, contact factory.
Options for Motorcycle systems include 4" round extended lens with LINZ6 style Super-LED lightheads, small OS LED lightheads, M2 and M4 Super-LED lightheads, fender mount-ing kits for 500 Series TIR6™, LINZ6™, TIR3™ and LIN3™ Super-LED lightheads, Dominator™ and Dominator Plus™ lighthead arrays, motorcycle battery, battery charger with 120 VDC receptacle, sirens, speakers, and LINZ6 windshield light array for 2000-2012 Harley-Davidson FLHTPI with full faring, and 2007-2012 Road King.
WING PLOW™ LIGHTING SYSTEMBright visible warning for extreme weather.
Wing Plow Tip Lighting SystemTIR3™ and NEW LINZ6™ Super-LED® light module warning system. Three models are offered in both lighthead styles, one for use when Wing Plow is in use, one for one when Wing Plow is stowed and one which includes both versions. Provides high visibility in both the snow plow wing stowed and travel positions. Pairs can be synchronized for alternating or simultaneous flashing. Each high impact lighthead is fully encapsulated in a rugged cast aluminum housing and includes 20’ of heavy-duty TPR cabling with built-in strain relief connections.
SmartSmart®
MOTORCYCLE SYSTEMSHeavy-duty lighting and siren products for motorcycle applications.
WPLOW3AA
WPLOWZ1A
2EB00ZCR / 2ER00ZCR M05ZJ2 M1FNDR
M05ZJ2
M04ZJM04ZJ
35
M4B6L
36
®
! All Whelen DOT3® Legal Lighting Systems are certified by an AMECA-accredited testing laboratory to meet or exceed SAE Class 1 warning lighting requirements in the appropriate specified safety colors.
! Super-LED offers all the impact of strobe with low amp draw.
! High and wide lighting profile identifies and defines the size and speed of a highway vehicle.
! Increased rear-end visibility with wide-angle long lasting Super-LED lightheads visible even when dump body is in raised or lowered position, including forward dump bodies.
! All warning lighthead colors are amber. For other colors, contact factory.
! The system offers multiple flash patterns and sequence options to provide improved reference for motorists in determining the distance to and location of maintenance vehicles.
! Each system includes complete installa-tion kit, including cable harness.
! Optional aluminum housings available.! Five year HDP® Heavy-Duty Professional
warranty.
Micro Freedom™
DOT3® LEGAL SUPER-LED® CERTIFIED LIGHTING SYSTEMS
Micro 400 SS Micro 400 (Stainless Steel) L31 Class 1 Beacon
500 Series AngledTop
View
400 Series SquareTopView
700 Series SquareTopView
®PROFESSIONAL
HEAVY DUTY
Systems 401, 501 & 701 2 - Micro Freedoms, 2 - rear lightheads
Systems 405, 505 & 705 2 - Micro 400s, 2 - rear lightheads
Systems 410, 510 & 710 2 - SS Micro 400s, 2 - rear lightheads
Systems 402 502 & 702 1 - L31 beacon, 2 - rear lightheads
System 103 2 - Micro Freedoms
System 108 2 - Micro 400s
System 109 2 - SS Micro 400s
System 107 2 - L31 beacons
Systems 406, 506 & 706 2 - L31 beacons, 2 - rear lightheads
Systems 404, 504 & 704 2 - rear lightheads
FRONT COMPONENTS
REAR COMPONENTS
DOT3 SYSTEMS
Wide angle lightheads give visibility with the dump box in raised and lowered positions.
FourLight
Systems
FourLight
Systems
TwoLight
Systems
TwoLight
System
TwoLight
Systems
ThreeLight
Systems
Housing shown without optional TIR3 side light
Optional TIR3 side light
Housing shown without optional TIR3 side light
37
NFPA 1901 SPECIFICATION LIGHTING PACKAGESProducts shown on this page are used in our NFPA 1901 Specification Lighting Packages.
A wide range of lighting packages designed to meet New NFPA 1901 Performance Standards for Aerial, Pumper and Rescue Apparatus.These packages identify equipment, that when used as a system, will meet NFPA 1901 photometric and electrical load requirements.
LIGHTHEADS
LIGHTBARS
BEACONS POWER SUPPLIES AND FLASHERS
AFL530 5 TerminalLED Flasher
ISP94 90 watt, 4 outlet 12 vdc
508 Series Trim81E & 810 Trim
Optional Flanges: Chrome plated or Black
ISP188 180 watt, 8 outlet,
12 vdc
AFM560 5 Outlet Halogen
Flasher
AFM1660 16 Outlet
Halogen FlasherRB6P SERIES
Rotating Halogen
B6T & B6MMRRP
SeriesCombination
Tailboard L31HRFNSuper-LED®
Contact us for our "NFPA 1901 Specification Lighting Packages" booklet. This booklet details complete packages and zone packages meeting NFPA 1901 requirements. Each lighting package includes a “Certificate of Compliance with NFPA 1901.”
600 and M6 Series headlight cluster mounting (lightheads sold separately)
700 Series Linear Strobe, Halogen & Super-LED
400Series
900Series
600Series
500Series
700Series
Mini Freedom
LFL Liberty™ Micro Edge®
902000BU
90F000RR
90RR5FRR
702000BU
70F000RR
70A02FAR
602000AU
MCSLED2A MCFLED2A
M6R
M9R
M6B
M4R
M2WR60F000AR
60A02FAR
402000AU40J000AR
50R03ZRR 50R02ZRR
81EC20RU 810CAARR
58EC20RU
6EHDLTMK M6HDLMTK
580CAABR
40RR5SCR
Ultra Freedom™ Micro Edge®
900 Series Linear Strobe, Halogen and Super-LED®
SmartSmart®
600 Series Linear Strobe, Halogen and Super-LED
SmartSmart® 508 Series Surface Mount
Linear Strobe & Dual Halogen
810 Series Surface Mount Linear Strobe & Halogen
400 Series Linear Strobe, Halogen & Super-LED
SmartSmart®
500 Series TIR6™ & LIN6 Super-LED
SmartSmart®
SmartSmart®
SmartSmart®
Ultra Freedom™ LED
Liberty™ LED Series
M Series Super-LED shown with optional Chrome flanges
LINZ6™ with optional Chrome flange
LINZ6J
Wide angle ION™ with standard Chrome flange
WION
LINZ6™Super-LED
LINZ6R
SmartSmart®
SmartSmart® SmartSmart
®
SmartSmart®
SmartSmart®
SmartSmart®
SmartSmart®
®
LIN3™Super-LEDRSR02ZCR
LIN3™ with optional Chrome flange
RSR02ZCR
SmartSmart®
38
AFM1660Two wire design 16 outlet halogen,LED or Super-LED ambulanceflasher. Each outlet will operate upto a 65 watt lamp (5 amps). Shortcircuit and thermal protected. Forinterior use only. AMP Mate-N-Lok®
connectors.Dimensions: 5/8” (15mm) H x 7-1/4”(184mm) W x 3-13/16” (97mm) D.
AFM560Five outlet Halogen, LED or Super-LED ambulance flasher. One wire design using a quick install, high current terminal block. Three outlets will oper-ate up to four 65 watt lamps (20 amps);two outlets will operate two 65 wattlamps (10 amps). Four Scan-Lockflash patterns. Short circuit andthermal protected. Ground wire maybe chassis grounded for ease ofinstallation. For interior use only.Dimensions: 5/8” (15mm) H x 7-1/4”(184mm) W x 3-13/16” (97mm) D.
AFL530Five outlet LED or Super-LEDambulance flasher. One wire designusing a quick install 7-position screwterminal block. Three outlets willdrive up to 10 amps each, and twooutlets will drive 5 amps each.Short circuit and thermal protected.Ground wire may be chassisgrounded for ease of installation.Encapsulated for heavy-duty,water resistant performance.Four Scan-Lock™ flash patterns.Dimensions: 5/8” (15mm) H x 6-1/2”(165mm) W x 2-3/4” (70mm) D.
4500 Build-a-Bar SeriesFlush mounted extrusion with or without ICC lights, in lengths starting at 22", can be equipped with your choice of linear or Super-LED® modules, strobe or halogen lightheads configurations to meet KKK primary lighting specifications or simple secondary lighting requirements. Slide bolt mounting simplifies installation, front mounted lenses and quick mountlightheads allow easy access to the interior of the bar for quick service or replacement. Traffic Advisors™ available with six or eight 400 Series Linear-LED® modules and come with a 35 foot cable and control head.Wide range of models and options to choose from.Size: 4-13/16” (118mm) H x 5-1/4” (133mm) W x various lengths in 2" (5cm) increments from 22" (56cm) to 90" (229cm).
AMBULANCE FLASHERS
CHASSIS MOUNT LIGHTBAR SYSTEMSAvailable in a variety of sizes and configurations, chassis mount lightbars are designed for surface mounting. All chassis mount lightbars feature slide mounting bolts. Custom lengths available.
AMBULANCE LIGHTBARS & FLASHERS
Shown as fully loaded lightbars. Visit our website or contact Dealer for ordering information.
®
Whelen’s “WeCad™” build-a-bar program is available on our Website at: www.whelen.com
To help you build your Lightbar, WeCad™ lightbar program is easy using “drag and drop” software and the graphic representation shows you how your lightbar is configured before you place your order.
At Whelen Engineering, our goal is to bring innovative, life saving products to market more quickly while maintain-ing strict quality control throughout the process. We have accomplished this through a vertical manufacturing initiative to eliminate or reduce out-sourcing; the use of robotics and state-of-the-art production equipment; and, perhaps most importantly, a motivated workforce of over 1100 employees. This allows us to meet and adapt to our customer’s changing needs in the shortest amount of time.
! Two manufacturing facilities totaling over 586,000 square feet.
! Largest staff of Design Engineers in the industry.
! Research and development.
! Partnering with OEMs on new vehicle design and product integration.
! Plastics injection molding machines from 30 to 2000 tons capacity.
! In-house plastics, hard coating, metallizing, and sheet metal fabrication.
! On-site test lab for environmental dust, moisture, vibration, etc, acoustic anechoic sound chamber, industry certifications (SAE, AMECA, FAA to name a few).
! Sales and Technical Personnel are trained at the factory training center and return for updates on a regular schedule.
! Worldwide network of Sales, Service and Training.
Charlestown, New Hampshire Division
Manufacturing facilities
Corporate Headquarters, Chester, Connecticut
Whelen Corporate Capabilities
®
ENGINEERING COMPANY, INC.
Where it all began.....It All Started 1952 in a Garage with the First Rotating Beacon.
A privately owned company, Whelen has experienced positive growth for over 60 years. The pride and commitment of its work force, whose employment longevity averages over 22 years, is rewarded through a profit sharing plan established by the Whelen family since the company was founded.
The development of the first aviation light helped launch Whelen into the automotive safety lighting industry as well. Whelen currently provides safety lighting for Police, Fire, EMS, and DOT professionals as well as many other indus-tries. The production volumes seen in the automotive sector have allowed Whelen to invest in the latest automated assembly equipment in order to compete world-wide. Last year Whelen purchased over 44 million LEDs for use in their extensive family of products. In the 1970s Whelen intro-duced the Outdoor Warning Siren ... totally electronic and capable of not just warning tones but also high-powered voice messages. The Mass Notification Division has saved lives around the world.
39
3-D Product Design Whelen’s Professional Design Engineers
Surface mount and through-hole circuit boards are manufactured, assembled and tested In-circuit.
design & EngineeringThe largest staff of Design Engineers in the industry! Many of our Engineers are Fire Volunteers and EMTs so they know firsthand the critical need for life saving, innovative products.
Electronics Manufacturing
injection and vacuum molding1600 molds, 38 molding machines from 30 to 2000 tons, 20 million parts produced every year. Vacuum machines produce irregularly shaped components not suitable for injection molding.
Injection Mold Making 3-D Tool Designs 1700 Ton Molding 3 Trimming Formed Parts Machines
14 Transformer Winding Machines 15 Cable & Wire Machines 5 Electronic Board Assemblies 12 Electronic Board Testing Machines
Electronic Assemblies SMT Assemblies Lightbar Production Automatic Robotic Cable Assembly
5 Over Molding Electronics Machines 38 Robotic Molding Machines Die-Cast Tool Making Aircraft Lens Mold Making
american employees, American manufacturing, American pride!
40
41
Production machine shop
finishing processesHard coating of lenses and powder coating housings make them resistant to weather and abrasion. Metallizing reflectors add reflectivity and helps prevent corrosion and oxidation.
The production machine shop uses state-of-the-art milling machines, CNC lathes and screw machines to make the precision parts required for our products.
2 High Speed Screw Machines Robotic Five-Axis 48 Pallet Milling Center 1 Milling and Turning Centers
fabrication
Five-Axis Laser Cutting Center 4 Laser Cut Punch & Tapping Centers 8 Metal Forming Machines
Transformer Manufacturing 8 Wire Cutting, Stripping & TerminalsMachines
Inventory Automatic Kit Bagging
Powder Coating Moisture Proof Coatings Silicone Hard Coating 5 Vacuum Metalizing Reflector Machines
Robotic and laser cutting and drilling, Robotic Bending Cells for stand-alone operation. All machine parts are produced and maintained by automated production machine shops in New Hampshire and Connecticut.
american employees, american manufacturing, american pride!
quality control and testing
51 Winthrop Road, Chester, CT 06412
www.whelen.com
Quality Control is maintained throughout the manufacturing process. Certified test labs on site facilitate product development and shorten lead times.
EMI Corrosion Atmospheric
Rain Vibration Dust Environmental
Photometric Chamber Acoustic Chambers Quality Control & Reliability Testing
Whelen’s Repair Goal is to get product repaired and back out the door to you within 24 hours. Authorized Service facilities are located
Managing Sales Representatives and technicians return to the plant several times a year for new product introduction and advanced training.
Repair, Service and Training
Repair Service Technician Electronics Technician Technical Support
®
ENGINEERING COMPANY, INC.Follow Us On....
Notice:Dimensions indicated for products are within + / - 1 / 16" (1.58mm) tolerance. Metric equivalents are rounded to nearest whole number. For special appli-cations requiring more precise measurement, contact factory.
The use of a magnetic or magnetic/suction mounted beacon on the roof of a vehicle in motion is not recommended, and is at the sole discretion and risk of the user.
Prior to using any interior light, consult your vehicle’s owner manual to insure proper use with air bag safety systems.
Whelen Engineering reserves the right to upgrade and improve products without notice.
For optimum performance and reliability, Whelen strobe power supplies are designed for use with Whelen flash tubes, strobe lightheads and cables only. Substitution of any of these components with non-Whelen products voids all warranties and any applicable certifications.
CometFlash, DOT3, Edge, HDP, Inner-Beam, Linear-LED, SI TEST, SmartLED, Super-LED, Universal, Project A-Flex, Responder, Super Strobe and Justice are registered trademarks of Whelen Engineering Company, Inc. Alpha, Avenger, Beta, CanTrol, CanTrol WC, CenCom, CenCom Gold, CenCom Sapphire, Century, Century Elite, Clip-Lock, Competitor, Competitor Plus, CON3, Cross-Link, Diagnostix, Dominator, Dominator Plus, DUO, DUO+, Epsilon, FlatLighter, Freedom, Fluorent, Fluorent Plus, Guardian, Grille-Master, HD Pro, Inner-Edge, Intelligent, ION, Legacy, Liberty, Linear, LIN3, LIN4, LIN6, LIN12, LINZ6, LTR, Lo-Pro, Mirror-Beam, Opti-Scenelight, Packer, Pan & Tilt, Perimiter Enhancement Light, PierceAlert, Piercer II, Pioneer, Pioneer Plus, Pioneer Max, Pioneer SlimLine, Projector, Rack-Pod, Raider, Rota-Beam, Safety Site, Scan-Lock, SideKick, SlimLighter, Slim-Miser, Smart-Link, SolarSentry, Spitfire Plus, SpecTIR, Strip-Lite, Traffic Advisor, TIR3, TIR6, Towman’s, Track-Pak, TRIO, Twin Side Beam, Under-Pro, V-Series Vertex, Vertex Competitor and Wing Plow are trademarks of Whelen Engineering Company, Inc.
NASCAR® is a registered trademark of The National Association for Stock Car Auto Racing, Inc.Harley-Davidson® is a registered trademark of the Harley-Davidson, Inc.
Trademarks
Whelen Trademarks are the property of Whelen Engineering Company, Inc. and may be used only as set forth in the Guidelines for Use of Whelen Trademarks available at www.whelen.com. Unauthorized use of Whelen Trademarks for commercial purposes may constitute trademark infringement and unfair competition in violation of federal and state laws.
For more information on our wide range of products, Please request our market specific catalogs, brochures and product bulletins.
Catalog AP12
®
Catalog AT-2012.1
A comprehensive-visual guide to Whelen's lighting and warning products.
®
Officially Licensed Warning Lights of NASCAR®
DODGE CHARGERPolice Lighting Package
We'll show you what
“FULLY LOADED” can really mean!
A comprehensive-visual guide to Whelen's lighting and warning products.
®
Officially Licensed Warning Lights of NASCAR®
CHEVY CAPRICEPolice Lighting Package
We'll show you what “FULLY LOADED” can really mean!
A comprehensive-visual guide to Whelen's lighting and warning products.
®
Officially Licensed Warning Lights of NASCAR®
FORD POLICE INTERCEPTOR
Police Lighting Package
We'll show you what “FULLY LOADED” can really mean!
®
Officially Licensed Warning Lights of NASCAR®
CHEVY TAHOEPolice Lighting Package
We'll show you what
“FULLY LOADED” can really mean!
A comprehensive-visual guide to Whelen's lighting and warning products.
Pioneer™ SlimLine™ Series SINGLE AND DUAL SUPER-LED ® WORKLIGHTS
Just under three inches in height, Pioneer SlimLine has all the reliability, rugged working characteristics and advantages of larger Pioneers in a more compact package. __________________________ Part of our total range of LED flood, spot and work lighting, these scaled down models are a fits-all addition to your vehicle’s supplemental lighting package.
Available in 12 or 24 VDC.Interchange lenses as needed to create dynamic spot/flood combinations.Two sizes and multiple mounting options to choose.Powder coated bail mount works for vertical or horizontal mounting.Recessed housing available in straight or fixed 15º with chrome trim ring.Low profile pedestal mount assembly available.Brow mount kit available for Freightliner M2 and all International chassis models. Center or left/right kits available. PSL2 only.Five year HDP® Heavy-Duty Professional Warranty.
FEATURESRugged die-cast white or black powder coated housing.Remarkably bright and rated to last thousands of hours with low amp draw.Single lamp SlimLine contains 12 LEDs, provides 3000 usable lumens at 35 watts.Dual lamp SlimLine contains 24 LEDs, provides 6000 usable lumens at 70 watts.Single unit comes with two lenses: Spot lens with 8º optics. (Comes installed) Flood lens, with 40º horizontal x 20º vertical optics. Dual unit comes with 3 lenses: Dual spot lens with 8º optics. (Comes installed) Dual flood lens, with 40º horizontal x 20º vertical optics. Dual spot/flood combination lens with 8º spot optics and 40º horizontal x 20º vertical flood optics.
®
LIGH
THEA
DS
Form#SLLN1012
®
ENGINEERING COMPANY, INC.
PSL1P
PSL2B
PSL2BB PSL1R
PSL2RB
PSL2PPSL2 with brow brackets
PSL1BB
- PRELIMINARY BULLETIN
L31 & L32 Series360° SUPER BRIGHT UNIFORM INTENSITY SUPER-LED® BEACONS
Permanent Mount Models™
™
FEATURES
®
L31 Models
L32 Models
NFPA Model
Magnetic & Magnetic/SuctionMount Models
™
do not include
BEAC
ONS
Form#LEDB1112
®
The brightest 360° LED Beacon in the industry! Patent pending all new Super-LED optical design packs all the punch of strobe while retaining the superior performance characteristics of LEDs.
______________________________________
ry!
®
HEAVY DUTY
PROFESSIONAL
PCCS9RW Power ControlPROGRAMMABLE HIGH CURRENT SWITCHES (REPLACES PCCS9R)
High current with built-in relays for lightbars that use standard switching. Connects to most lightbars and auxiliary warning equipment without the use of separately mounted relays or relay boxes. __________________________
™
FEATURESMODELPCCS9RW:
Form#PCWR1212
SIRE
NS
SPEA
KERS
SW
ITCH
ES
American Employees, American Manufacturing, American Pride!
®
ENGINEERING COMPANY, INC.
Whelen Engineering reserves the right to upgrade and improve products without notice. © 2012 Whelen Engineering Company, Inc. Printed in U.S.A. Code No. 12647A - 12/12
6-1/8”(156mm)
1-7/8”(47mm)1-9/16”
(40mm)
6”(152mm)
®
1-7/8”(47mm)
6-1/4”(159mm)
1-1/8”(28mm)
SpitFire™ Plus SeriesSUPER-LED ® DASH AND DECK WARNING
A compact, full-featured, Super-LED dash and deck light with 50% more light output in a smaller package than the original SpitFire. SpitFire Plus is the high performance, cost-effective alternative to the larger Whelen Avenger™ Series.
MODELSSFP1* .............Single colorSFP1# ............Split color
*Replace symbol in model number with color desired. A=Amber, B=Blue, R=Red, C=White, G=Green# Replace symbol in model with split color desired. D=Red/White, J=Red/Blue, E=Blue/Clear
FEATURESClear non-fluted lens and black molded polycarbonate integral hood and housing with bail bracket and two suction cups for mounting.Wide angle visibility and high intensity performance while having an average 300mA current draw (700mA peak).SmartLED® design requires no external flasher.Multiple Scan-Lock™ flash patterns, including four California Title XIII patterns. Allows for alternating (3x3 diodes) and simultaneous patterns (for split models), plus steady-burn. Split colors available. Fully encapsulated electronics provide full moisture and vibration protection.Eight-foot straight cord and cigar plug with On/Off Switch and pattern control switch.12 VDC.5 year warranty on Super-LEDs.
DASH
DE
CK
VISO
RS
American Employees, American Manufacturing, American Pride!
®
®
ENGINEERING COMPANY, INC.51 Winthrop Road
Chester, Connecticut 06412-0684 (860) 526-9504 Fax: (860) 526-4078
www.whelen.com
Whelen Engineering reserves the right to upgrade and improve products without notice. © 2011 Whelen Engineering Company, Inc. Printed in U.S.A. NASCAR® is a registered trademark of the National Association for Stock Car Auto Racing, Inc. Code No. 12306B - 02/11
Form#SFP0211
1-9/16”(40mm)
4-3/8”(111mm)
3-1/2”(89mm)
SFP1R
SFP1J
Outer Edge®
SUPER-LED® EXTERIOR REAR LIGHTBARS
Vehicle specific Super-LED horizontal and Pillar mount warning for 2010-2011 Chevy Suburban/Yukon/Tahoe models._________________________________
Whether the rear hatch of your vehicle is open or closed, Whelen now offers lighting protection specific to the back of that vehicle. Horizontal and vertical models are made for the rough treatment, weather and chemical exposure that’s part of your job environment.
FEATURESOE13UR8 and RP13** Models
window with 3M® VHB tape, included.
for superb moisture and vibration resistance.
™ lets you scan through multiple flash patterns and select the desired pattern.
OE13UR8 Horizontal Mount Models™ lighthead modules
mounts, on the upper portion of the vehicles rear window.
™, or eight
and two end flashing lamps.
patterns.
RP13** Vertical Pillar Mount Models
lightheads.
assembly rear pillar.
LIGH
TBAR
S
American Employees, American Manufacturing, American Pride!
®
Form#OE12011
®
MODELSPillar Vertical MountRP13**: RP§§§00:
Rear Window Horizontal MountOE13UR8:
AdvisorOE13UR8T:
with two end flashersOZP§§§00:
HOW TO ORDER COLORS* = Replace * in model number with color desired for +Vertex lightheads: A = Amber, B = Blue, R = Red and C = White§ = Replace symbol (§) in model number of each color LED lighthead desired, order of colors are Red, Blue, Amber and White.
®
Form# TA0710 American Employees, American Manufacturing, American Pride!
LIBERTY™
L I N E A R - L E D® L I G H T B A R S E R I E S
Now available with NEW Liberty TRIO™ and DUO™ technology
modules & TrafÀ c Advisor™ PLUS 4 extra high intensity
LED corner modules
Officially LicensedWarning Lights of NASCAR®
Form# LIB0812 American Employees, American Manufacturing, American Pride!
©
51 Winthrop RoadChester, Connecticut 06412���������������)D[�������������www.whelen.com
NASCAR® is a registered trademark of the National Association for Stock Car Auto Racing, Inc.© 2013 Whelen Engineering Company, Inc.
American Employees, American Manufacturing, American Pride!
ENGINEERING COMPANY, INC.