AUTOPIA

Maximum FOV-at-test up to 210⁰Possible for stereo camera alignment11 Degree of Freedom to enhance alignment qualityHighly configurable se�ngs • Easy switch between maximal yield or maximal UPH produc�on sequence • Extensive user-define process parameters availableAlignment result is greatly improved by sensor leveling Automa�c precision loading/ unloading forhigh volume produc�onCompe��ve cost of ownershipScalable for inline produc�onClass 100 cleanliness

Value Proposi�ons

ASM Pacific Technology www.asmpacific.com

An Innova�on for Camera Precision Alignment and Tes�ng

ASM

Ac�

ve A

lignm

ent

Specially designed and manufactured with the highest quality for precision alignment assembly and testing of wideField of View camera module, catered for Automotive, Surveillance, Sports and Drones applications

An Innovation for Camera Precision Alignment and Testing

AUTOPIA

www.asmpacific.com

ASM Pacific Technology

ASMPTWorldwide

The informa�on in this documenta�on consists only of general descrip�ons and / or performance features, which is not contractually binding. Subject to changes without no�ce.*ASM reserves the right to modify/change the specifica�ons.

rev 3.0

Active Alignment

Final Tester

Final Tester

Test Charts

Test Charts210˚ with

side collimators Included Included

Active Alignment Collimators

Collimators

Up to 210˚

210˚ withside collimators

Up to 210˚

Included Included

Included

IncludedN.A

N.A

Product Series

AUTOPIA Series Type Target Projec�on FOV Capability AA Module Image Tes�ng

Unique Product Features

Specifica�ons

Facili�esDimension (with MTS): 2630mm(L) x 2200mm (W) x 2300mm (H)Weight (with MTS): ~2900kgPower (MTS); 380-415VAC, 3 PhaseFrequency: 50/60Hz (Preset at factory)Compressed air pressure: 5-6 Bar

PerformanceCycle �me: 15s*FOV: depending on CM or CT versionCuring System: 4x 365nm LED, >2000mWDegree of Freedom: SUT 5 DOF + AA 6 DOF

Material HandlingMTS loading: JEDEC 322.6 x 135.9mm²Lens Holder type: FF/AF/OIS moduleLens Holder size: up to 25 x 25 x 45mm²Substrate type: FR4 PCB or flex PCB with connector socketSubstrate size: Up to 60 x 60 x 2mm²

Test chart with 4 Motorized side collimators - Facilitates conversion between packages

11 Degree of Freedom - Feasible for either Lens or Sensor �l�ng alignment

Dual Unit Transporter - Capability to adopt different module within setup

High volume handling via magazines and trays Robo�c arm for precision pick and place

Sensor

Test Chart

Side Collimator

LensUT - A UT - B