Auxiliary

Section 3

Australia

®

BMS ModulePump Control Auxiliary Equipment

PU

MP

2FA

ULT

PU

MP

1FA

ULT

HIG

HL

EV

EL

AL

AR

M

PO

WE

RFA

ILU

RE

PO

WE

R IN

9-12V A

C/D

CD

ATA

IN

BMS MODULE

A unique feature of the FPC-300 Dual Pump Control-ler is the coded Data Output, which can be utilized to provide a signal to a remote, compatible device such as this BMS Module. The unique feature is that the coded data signal, derived from the Pump Controller’s micro processor, is conveyed through a low voltage, 2 wire connection and then decoded by the BMS Module micro controller. Once the signal is decoded the micro controller provides four voltage free relay outputs for interfacing with a computer or other monitoring equip-ment. An additional feature of the BMS Module is the inclusion of indicator lights on the circuit board, which can be viewed through the clear enclosure lid, indicat-ing relay ‘switched’ status. The module operates on 9 - 12V ac/dc and is supplied complete with power pack.

FPC-30110

PUM

P 2FA

ULT

PUM

P 1FA

ULT

HIG

HLEVEL

ALA

RM

POW

ERFA

ILUR

E

POW

ER IN

9-12V AC

/DC

DATAIN

BMS MODULE

MODESELECT

INPUT2INPUT14-20mA

+ -INPUT3 INPUT4 BMS/

REMOTESTROBE

- +SIREN- +

POWER12Vac

PUMP 1 PUMP 2PUMP 2FAULT

PUMP 1FAULT

KEYPAD CONNECTION PIN 1

500mA

DUAL PUMPCONTROLLERCOM-30089

240V 10A MAX

Australia

®

IMPORTANT: READ INSTALLTION AND OPERATION MANUAL BEFORE USE

Wiring

Kit IncludesBMS Control CardPower PackPolycarbonate Enclosure with Clear Lid

PU

MP

2FA

ULT

PU

MP

1FA

ULT

HIG

HL

EV

EL

AL

AR

M

PO

WE

RFA

ILU

RE

PO

WE

R IN

9-12V A

C/D

CD

ATA

IN

BMS MODULE

85m

m

125mm 55mm

2 WireConnection

For Connection to Monitoring Device

(by others)

Two core communication cableDistance between pump controller and BMS Module - up to 150 meters

Building Management System - BMS Module

FPC-30110

Section 3

Australia

®

Remote Status Indicator-Dual PumpPump Control Auxiliary Equipment

A unique feature of the FPC-300 Dual Pump Controller is the coded Data Output, which can be utilized to provide a signal to a remote, compatible device such as this Remote Status Indicator. The unique feature is that the coded data signal, derived from the Pump Controller’s micro processor, is conveyed through a low voltage 2 wire connection and then decoded by the Remote Status Indicator’s micro controller. Once the signal is decoded the micro controller provides four outputs to LED’s and a Buzzer mounted on the circuit board. Conditions displayed by the remote indicator include ‘power on’, ‘high level’, ‘pump 1 fault’ and ‘pump 2 fault’. The indoor indicator is mounted on an attractive wall plate, which incor-porates the four indicator lights, plus the buzzer and mute button.

As soon as an alarm condition occurs at the pump station, the appropriate LED on the indicator is illuminated and the Buzzer starts to sound. The Buzzer will automatically silence after 5 minutes. The Buzzer can also be muted by way of the Mute button. The Alarm light will remain illuminated until the fault condition is remedied.

Remote Status IndicatorS

IGN

AL

IN

MATelec

REM

OTE STATU

SIN

DIC

ATOR

MODESELECT

INPUT2INPUT14-20mA

+ -INPUT3 INPUT4 BMS/

REMOTESTROBE

- +SIREN- +

POWER12Vac

PUMP 1 PUMP 2PUMP 2FAULT

PUMP 1FAULT

KEYPAD CONNECTION PIN 1

500mA

DUAL PUMPCONTROLLERCOM-30089

240V 10A MAX

Australia

®

IMPORTANT: READ INSTALLTION AND OPERATION MANUAL BEFORE USE

Wiring

The wall mount display is the size of a typical light switch, featuring sub-surface LED’s and Mute button. The use of a UV stabilized membrane overlay, ensures a long lasting ‘new look’ is maintained.

Indoor Wall Mount Display

No external power source required

2 WireConnection

Standard Switch Plate Size

117m

m

73mm

Mounting PlatePCB Plaster BracketMounting Screws

Kit Includes

Two core communication cableDistance between pump controller and RSI - up to 150 meters

FPC-30100

FPC-30100

Section 3

Australia

®

Remote Status Indicator-Single PumpPump Control Auxiliary Equipment

Level Alarm

Pump Fault

A unique feature of the FPC-1500 Single Pump Controller is the coded Data Output, which can be utilized to provide a signal to a remote, compatible device such as this Remote Status Indicator. The unique feature is that the coded data signal, derived from the Pump Controller’s micro processor, is conveyed through a low voltage 2 wire connection and then decoded by the Remote Status Indica-tor’s micro controller. Once the signal is decoded the micro controller provides three outputs to LED’s and a Buzzer mounted on the circuit board. Conditions displayed by the remote indicator include ‘power on’, ‘high level’ and ‘pump fault’. The indoor indicator is mounted on an attractive wall plate, which incorporates the four indicator lights, plus the buzzer and mute button.

As soon as an alarm condition occurs at the pump station, the appropriate LED on the indicator is illuminated and the Buzzer starts to sound. The Buzzer will automatically silence after 5 minutes. The Buzzer can also be muted by way of the Mute button. The Alarm light will remain illuminated until the fault condition is remedied.

Remote Status Indicator

Level Alarm

Pump Fault

SIG

NA

LIN

MATelec

REM

OTE STATU

SIN

DIC

ATOR

MODESELECT

INPUT2INPUT14-20mA

+ -INPUT3 INPUT4 BMS/

REMOTESTROBE

- +SIREN- +

POWER12Vac

PUMP 1 PUMP 2PUMP 2FAULT

PUMP 1FAULT

KEYPAD CONNECTION PIN 1

500mA

DUAL PUMPCONTROLLERCOM-30089

240V 10A MAX

Australia

®

IMPORTANT: READ INSTALLTION AND OPERATION MANUAL BEFORE USE

Wiring

The wall mount display is the size of a typical light switch, featuring sub-surface LED’s and Mute button. The use of a UV stabilized membrane overlay, ensures a long lasting ‘new look’ is maintained.

Indoor Wall Mount Display

No external power source required

2 WireConnection

Standard Switch Plate Size

117m

m

73mm

Mounting PlatePCB Plaster BracketMounting Screws

Kit Includes

Two core communication cableDistance between pump controller and RSI - up to 150 meters

FPC-15100

FPC-15100

Section 3

FPC-15100

Australia

®

SMS Alarm SenderPump Control Auxiliary Equipment

A unique feature of the FPC-300 Dual Pump Controller is the coded Data Output, which can be utilized to provide a signal to a remote, compatible device such as this SMS Alarm Sender. The unique feature is that the coded data signal, derived from the Pump Controller’s micro processor, is conveyed through a low volt-age 2 wire connection and then decoded by the BMS unit. Once the signal is decoded the micro controller provides four inputs to the GSM modem which then in turn, sends SMS messages as configured.

FPC-30120SMS Alarm Sender

Up to 5 separate phone numbers to send messages toSending of a descriptive message whenever an alarm condition is initiated or clearedSending of alert message if backup battery voltage drops too low

Features

GSM modem (preconfigured with supplied phone numbers and SIM code)Antenna to suit1.7Ah or 3Ah SLA battery 12V Power supply / battery charger

Kit Includes

In order to pre-configure the GSM modem, the customer will need to supply an active SIM card, along with; up to 5 Phone numbers, all of which are messaged upon an alarm action. SIM code, so that the GSM modem can access the SIM card. Station name, to be included in any SMS sent, for identifying which pump station has sent the message.

Notes

OFF

ON

1

4

7

2

5

8

3

6

9

0* + #

ghi jkl

tuv

abc def

pqrs

mno

wxyz

MATelec

PUMP STATION

NO.1HI LEVEL

FAULT

Dual PumpController

PUMP 1 PUMP 2

AUTO

OFF

AUTO

OFF

MAN MAN

MUTE

RUNNING RUNNING

FAULT FAULT

HIGHLEVEL

POWERON

DANGER - HIGH VOLTAGE DO NOT REMOVE COVER. AUTHORIZED PERSONS ONLY

PRESS FOR 3 SECONDS TO CLEAR FAULT

Section 3

NOTE: Depending on which pump controller model has been ordered, the SMS Alarm Sender may need to be housed in a separate enclosure.

Australia

®

Configuration & Data Log DevicePump Control Auxiliary Equipment

Section 3

FPC-15010 - Overview

FPC-15 Series Pump Controller Configuration and Data Log Device is an extemely useful setup tool, which works in conjunction with the 15000 Series Single Pump Controller. The device interconnects directly with the PCB and is able to both, configure a variety of features, as well as report logged data. The device has an LCD screen, arrow and enter keys making it very user friendly.

Configurable Features:

• Manual mode timeout• High level - enable• High Level alarm - delay time• High level alarm - automatic reset• Low level alarm - enable• Max idle timer - enable• Max idle time• Anti-seize timer - enable• Anti-seize time• Anti-seize run time• Max run timer - enable• Max run time• Max run cool down time• High pressure current sensing - enable• High pressure current limit• Overload current sensing - enable• Overload current limit

Logged Data:

• Number of pump starts• Accumulated pump run hours• Number of power resets• Number of overloads• Number of high levels• Number of low levels• Number of pressure inhibits• Number of maximum run timeouts• Serial number• Software version

FPC-15 SERIESPUMP CONTROLLERCONFIGURATION &DATA LOG DEVICE

Features