avail able now! · 2019. 6. 3. · 3 • single stage ram with high quality, glide action pressure...

Your local TradeZone Store

www.tradezone.co.nz

Proud Sponsors of Proud Sponsors of

VOL 168 JUN-JUL2 0 1 9

N Z ’ S I N D U S T R I A L S U P P L Y S P E C I A L I S T S

AVAILABLE NOW!

2

7PC AUTO BODY REPAIR TOOL KITKT9CF-307

7pce auto body repair tool set Blow case Contains:- KT9CF132 - straight pein & finishing hammer- KT9CF241 - thin toe dolly- KT9CF110 - standard bumping hammer- KT9CF120 - light shrinking hammer- KT9CF210 - utility dolly- KT9CF220 - curved dolly- KT9CF230 - heel dolly

7PC AUTO INSPECTION TOOL KITKT9TQ01

7pce auto inspection tool kit Contains: stainless steel telescopic bar, magnet pick up with LED light, magnet pick up tool, flexible claw pick up tool, magnetic disc, inspection mirrors

HOSE CLAMP PLIER SET 11PCKT9AA01

11 PC. Hose Clamp Pliers Set This comprehensive set can be applied to most hose clamps of flat band, worm drive and Clic type - Use for removing and installing common hose clamp type

31PC UNIVERSAL DISC BRAKE TOOL KITKT9BC23

• 31pce universal disc brake wind-back tool kit• For rotating pistons back into caliper to

provide clearance for new pads• Prevents damage to the piston and boot• Suitable for BMW, Ford, VW, Audi, Porsche,

Saab, Opel, Volvo, Jaguar, Citroen, Peugeot, Renault, Vauxhall, Lancia, Alfa Romeo, Fiat, Nissan, Hondas, Subaru, Toyota, Mitsubishi

$29104$334.70 GST Incl.

+GST

$10616$122.08 GST Incl.

+GST

$30000$345.00 GST Incl.

+GST

$31538$362.69 GST Incl.

+GST

$15500$178.25 GST Incl.

+GST

BRAKE BLEEDER BOTTLE 800MLKT9BC31

• Easy to operate and inspect the brake bleeder valve by one person

• Use for separating the air in the brake oil and replace the brake fluid

• 800ml$9077

$104.38 GST Incl.+GST

COMBINATION WRENCH SET 22PCEWREC-S22M

• Drop Forged from Carbon Steel with polished ends. 1ea - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 25, 27, 30, 32mm.

MANUAL FLUID EXTRACTOR 9LKT9TV21-09

HOSE PINCH-OFF PLIER 2PCPLIH-T70564

Special radius jaws to avoid damaging hoses. Lightweight and non-conductive. For use on all brake and fuel lines.

$14630$168.25 GST Incl.

+GST

$29077$334.38 GST Incl.

+GST

$1925$22.14 GST Incl.

+GST

$10520$120.98 GST Incl.

+GST

$3371$38.77 GST Incl.

+GST

HD WIRE STRIPPER & CRIMPERWS665Very popular multi-application tool provides outstanding quality work. Simple, efficient and reliable. Plastic handles with rubber intermoulds for maximum comfort and grip. Manufactured from quality alloy steel with black oxide finish for increased service life.

Insulated crimping range: 0.5–6mm², 22–10 AWGNon-Insulated crimping range: 0.5–2.5mm and 4–6mm², 12–10/22–14 (AWG)

DOUBLE GEARED WRENCH SETWREG-T42516

Thin profile head for tight hard-to-reach areas. Forward/Reverse Lever. 1 x 8x9, 10x11, 12x13, 14x15, 16x 17 & 18x19mm Wrenches.

EXTRA LONG DOUBLE RING SET 6PCGPAP06028 x 10mm, 10 x 12mm, 12 x 14mm, 14 x 17mm, 17 x 19mm, 22 x 24mm.Heavy duty canvas pouch.

WRENCH REVERSIBLE GEARED 15PCGBA1541

Chrome vanadium steel. Satin chrome finish. Includes 8 - 19mm. Socket adapters 1/4, 3/8, 1/2”.

$26500$304.75 GST Incl.

+GST

3

• Single stage ram with high quality, glide action pressure pump.

• Serrated, heat treated saddle for secure grip.• Wide base plate for stability and strength. • Standards conform to ANSI/ASME.

T90604 BOTTLE JACK 6 TONJACB-T90604

Capacity: 6 TonMin Height: 216mmLift Height: 127mmAdjusting Height : 70mmBase Plate: 96 x 112mm

T43002 AXLE STAND (1PR) 3 TONSTAA-3

Capacity: 3 TonMin Height: 285mm Max Height: 425mm

$3836$44.11 GST Incl.

+GST

$4612$53.04 GST Incl.

+GST


Capacity: 12 TonMin Height: 230mmLift Height: 155mmAdjusting Height: 80mmBase Plate: 116 x 134mm

T46002 AXLE STAND (1PR) 6 TONSTAA-6

Capacity: 6 TonMin Height: 390mm Max Height: 605mm

$5881$67.63 GST Incl.

+GST


Capacity: 20 TonMin Height: 242mmLift Height: 150mmAdjusting Height: 60mmBase Plate: 144 x 152mm

$8647$99.44 GST Incl.

+GST

STAINLESS STEEL BUMPER GUARDTE15BG

Protects the bumper from being hit by trailer coupling. Stainless Steel.

TYRE CHANGERU-221A

Full automatic pneumatic tilting column, pneumatic, locked optional position. 24" large turntable an powerful motor, suitable for low profile tyre. High strength alloy pedal. Quick air booster makes the tyre and rim jointed instantly, especially suitable for low profile tyres. Motor power 0.75kw/0.55kw/1.1kw. Power supply 220V/400V/110V. Max. wheel diameter 41" (1040mm). Max. wheel width 14" (355mm). Outside clamping 10-21". Inside Clamping 12 - 24". Air supply 8bar. Bead breaker force 2500kg. Noise level <75dB

WHEEL BALANCERU-820

High mechanical principal axis perform the heat treament processibility to make sure the precision of repeated measure. High accurate and high stable integrated circuit, self -calibration and diagnosis functions. Design the luxury appearance, increase and thicken the body, with steel supported at the bottom and ensure the stability of the cabinet. Max. wheel weight 65kg. Motor power 0.2kw/0.37kw. Power supply 220V/110V. Balancing accuracy *1g. Balancing speed 200rpm. Rim diameter 10-24". Rim width 1.5-20". Measuring time 8sec. Noise level <70dB

$9450$108.67 GST Incl.

+GST

T46002 AXLE STAND (1PR) 6 TON

$8433$96.98 GST Incl.

+GST

• Ratchet type for fine adjustment with double locking protection.• Large saddle, unitized frame construction, ductile iron rack.• Safety standards conform to ANSI/ASME

$13826$159.00 GST Incl.

+GST

1.92TON / 1750KG HIGH LIFT 4X4 JACKWTF1750

Can be used as an all-purpose hoist or winch, for lifting trucks, tractors & farm equipment. Great for off-roading emergencies, lifts, pulls & pushes. Steel shaft. Lifting range: 106mm to 1020mm. Overall height: 1215mm. Tongue length: 100mm.

Can be used as an all-purpose hoist or winch, for lifting trucks, tractors & farm equipment. Great for off-roading emergencies, lifts, pulls & pushes. Steel shaft. Lifting range: 106mm to 1020mm. Overall height: 1215mm. Tongue length: 100mm.

$5075$58.36 GST Incl.

TRAILER WHEEL LOCKTE12WL3 Fully adjustable to 290mm wide. Hardened steel. High quality brass lock and two keys. Fits most 13” and 15” wheels.

*wheel not included

BATTERY CHARGERSProfessional battery chargers. Metal case construction. Voltage selection. Thermal protection against overload. Polarity reversal.

$24600$282.90 GST Incl.

+GST$43800$503.70 GST Incl.

+GST

PROGRESS20 12-24 Volt 16AMP

PROGRESS25 6-12-24 Volt 25AMP

$293200$3,371.80 GST Incl.

+GST

$176667$2,031.67 GST Incl.

+GST

Wide base plate for stability and strength.

BONUSBig Red Beanie

4

AIR DRILL, REVERSIBLE3/8” DR, 1800RPMDRIA-A2431 • Durable idler planetary gears

prolong air tool life. • Positive action trigger for variable speed

control. • Ideal for general heavy duty drilling, engine

work and other auto body applications. (160mm chuck end to handle end).

• Hose Size (ID) : 3/8”.

ANGLE HEAD REVERSIBLE AIR DRILL 3/8" DRDRIA-A2432 • Compact design for close clearance operation • Variable speed lever throttle for precise operation • Rear exhaust keeps air away from work area • Forward/Reverse control locks in both positions • Lightweight for fatigue free handling.

Durable idler planetary gears

Positive action trigger for variable speed

Ideal for general heavy duty drilling, engine $10985$126.33 GST Incl.

+GST$19910$228.97 GST Incl.

+GST

BONUSStep Drill 4 - 20mm

PRO AIR DIE GRINDERGRID-A3026

Throttle lever gives positive speed control. Rear exhaust directs air away from work surface. Ball bearing construction for longer tool life.

GEARLESS ANGLE HEAD AIR DIE GRINDER & SANDERGRID-A3028

• Rear exhaust directs air away from work surface• Perfect for touch-up and production sanding• Unique gearless mechanism for longer tool life• Accurately grinds, and will smooth and finish rough

areas when space is limited

$6900$79.35 GST Incl.

+GSTCollet size : 6mmFree Speed (RPM) : 25,000Avg. Air Consumption (CFM) : 4Air Pressure (PSI) : 90

Drill Capacity : 3/8"" Spindle/Thread Size : 3/8""-24 Free Speed (RPM) : 1,800 Avg. Air Consumption (CFM) : 4.0

Air Inlet (NPT) : 1/4””Hose Size (ID) : 3/8””Overall Length : 160mmBody Size (square) : 35 x 31mm

AIR DUSTER 100MMGUNA-A1454

• Easily cleans and removes dust from equipment.

• Impact resistant gun body and stainless steel spring.

• Seamless air pipe to prevent air leakage.

HVLP GRAVITY FEED SPRAY GUNGUNS-A6041

• High volume, low pressure for greater efficiency• Very low over spray and fine atomisation • Chrome with anodized air cap• Gravity feed action for less air and better control

over atomisation and fluid output.

HEAVY DUTY AIR HAMMERHAMA-A3112

• Ideal for cutting applications, exhaust systems and general repair work

• Heat treated piston and cylinder for durability• Pistol grip design with non-slip rubber covered

handle

AIR GRAVITY FEED SAND BLASTERSANB-A3714

• Compact, portable sandblasters with large capacity

• Gravity feed design offers uninterrupted and consistent material flow

• Pistol grip for easy and comfortable control.

$1075$12.36 GST Incl.

+GST

$8537$98.18 GST Incl.

+GST$8537


$9717$111.74 GST Incl.

+GST

$14582$167.69 GST Incl.

+GST$13687$157.40 GST Incl.

+GST

$3523$40.51 GST Incl.

+GST

$5642$64.88 GST Incl.

+GSTOperating Pressure (PSI): 90 - 100 psi. Operating Pressure (PSI) : 78 - 120

Avg. Air Consumption (CFM) : 6.9 Air Pressure (PSI) : 160 Air Inlet (NPT) : 1/4"

Spray Pattern (mm) : 160 - 180 Air Pressure (PSI) : 29 - 43 Needle Nozzle (mm) : 1.4

Cup Capacity (CC) : 600 Fluid Inlet (NPS) : M16 x 1.5

Bore Size : 3/4"Chisel shank (mm) : 10.3Blow per Minute (BPM) : 3,200Stroke Length (mm) : 67

Avg. Air Consumption (CFM) : 3.7Air Pressure (PSI) : 90Air Inlet (NPT) : 1/4"Hose Size (ID) : 3/8"

Max. Cutting Size (mm) : 1.6 Stroke Length : 3/8" Stroke Per Min. (SPM) : 5,000 Avg. Air Consumption (CFM) : 4.0

Air Pressure (PSI) : 90 Air Inlet (NPT) : 1/4" Hose Size (ID) : 3/8"

Bolt Capacity : 5/16" Max Torque (Ft-Lb) : 18 Free Speed (RPM) : 240 Avg. Air Consumption (CFM) : 3.0


Collet Size : 6mm Air Pressure (PSI) : 90

Air Inlet (NPT) : 1/4" Hose Size (ID) : 1/4"

Nozzle Size : 5mm Case Capacity : 532ml Avg. Air Consumption (CFM) : 7.0


Collet size : 6mm Sanding Pad Adaptor : 50mm Free Speed (RPM) : 25,000Avg. Air Consumption (CFM) : 4 - 6

Air Pressure (PSI) : 90Air Inlet (NPT) : 1/4" Hose Size (ID) : 3/8"

Air Pressure (PSI) : 90 Air Inlet (NPT) : 1/4"" Hose Size (ID) : 3/8""

ENGINE CLEANING GUNGUNE-A1449

Excellent for cleaning dirt, grease, grime, moulds or delicate surfaces. An ideal tool for garages, shops, farmers and contractors. Extended shaft allows access into hard to reach areas.

TYRE INFLATOR WITH GAUGE PISTOL GRIPINFT-A1431

• Pressure gauge ranges from 10-120Lb.• Makes accurate inflation pressure simple and fast.• Well-balanced pistol grip for easy handling.• Ideal for automobile tyres, farm equipment tyres, bicycle

tyres and most other inflatables.

Air Inlet (NPT) : 1/4" Hose Size (ID) : 1/4"

and most other inflatables.

AIR BODY SAWSAWA-A2311

• Ideal for body shop repair, muffler and exhaust work

• Cuts all types of aluminium, plastic, fibreglass and sheet metal

• Cuts intricate shapes and tight radius curves.

A4120 PRO AIR RATCHET 1/4"DRWRER-A4120

• 200mm compact head design for trim work, dash boards and smaller engines

• Reaches confined areas where impact wrenches can’t reach

• Ball and needle bearing construction.

$11806$135.77 GST Incl.

+GST

Lightweight for fatigue free handling.

BONUSAmPro Beanie

Ideal for body shop repair, muffler and

Cuts intricate shapes and tight radius curves. Cuts intricate shapes and tight radius curves.

BONUSAmPro Beanie

5

ALUMINIUM OXIDE FIBRE DISCS

$18634$214.29 GST Incl.

+GST

ALUMINIUM DEP-CENTRE GRINDING WHEELS A24/30P

Code Model +GST Inclusive

66252841602 100 x 2.5 x 16.0mm $2.77 $3.18

66252841603 115 x 2.5 x 22.2mm $2.79 $3.21

66252841604 125 x 2.5 x 22.2mm $2.83 $3.26

66252841606 230 x 2.5 x 22.2mm $4.50 $5.17

66252841753 100 x 6.0 x 16.0mm $2.44 $2.81

66252841758 125 x 6.0 x 22.2mm $3.70 $4.26

66252841759 180 x 6.0 x 22.2mm $5.33 $6.13

66252841760 230 x 6.0 x 22.2mm $7.60 $8.74


66623320255 P80 230 x 280mm $1.04 $1.20

66623320257 P120 230 x 280mm $0.81 $0.93

66623320259 P180 230 x 280mm $0.81 $0.93

66623320261 P240 230 x 280mm $0.70 $0.81

66623320263 P320 230 x 280mm $0.70 $0.81

66623320265 P400 230 x 280mm $0.70 $0.81

66623320267 P600 230 x 280mm $0.70 $0.81

66623320268 P800 230 x 280mm $0.70 $0.8166623320270 P1200 230 x 280mm $0.70 $0.81


66253370634 100 x 1.0 x 16mm $2.04 $2.35

66253370635 115 x 1.0 x 22.2mm $2.10 $2.42

66253370636 125 x 1.0 x 22.2mm $2.23 $2.56

66253371766 100 x 3.0 x 16.0mm $2.19 $2.52

66253371767 115 x 3.0 x 22.3mm $2.48 $2.85

66253371768 125 x 3.0 x 22.3mm $2.73 $3.14

ALUMINIUM CUT-OFF WHEELSManufactured with a specific ‘non-loading’ bond, for cutting non-ferrous metals such as aluminium, copper, brass and bronze.

MULTI-MATERIAL ULTRA THIN CUT OFF WHEELS

MULTI-MATERIAL ULTRA-THIN GRINDING DISCFor grinding stainless steel, metal, masonry, aluminum, PVC and tiles.


66252841636 50 x 0.89 x 9.53mm $2.17 $2.49

66252841700 50 x 4.0 x 9.53mm $4.33 $4.98

66252841638 76 x 0.89 x 6.35mm $3.44 $3.96

66252841639 76 x 0.89 x 9.53mm $3.46 $3.98

IRON FREE METAL ULTRA THIN CUT OFF WHEEL A36Q-T41Ultra thin, general purpose cutting of ferrous metals, suitable for cutting stainless steel, iron free.

MEGA-LINE ULTRA THIN CUT-OFF DISCS 127 X 1 X 22MM66253371411

Ultra-thin, premium grade for cutting stainless steel, alloy steel and hard ferrous metal. Free of iron, sulphur and chlorine. Fast straight cutting and long life.

Code Description +GST Inclusive

66623324045 100 x 16mm, P24, Brown $1.04 $1.2066623324046 100 x 16mm, P36, Brown $1.04 $1.2066623324048 100 x 16mm, P60, Brown $0.79 $0.9166623324049 100 x 16mm, P80, Brown $0.73 $0.8466623324051 100 x 16mm, P120, Brown $0.73 $0.8466623324053 115 x 22mm, P24, Brown $1.23 $1.4266623324054 115 x 22mm, P36, Brown $1.23 $1.4266623324056 115 x 22mm, P60, Brown $1.06 $1.2266623324057 115 x 22mm, P80, Brown $0.98 $1.1366623324059 115 x 22mm, P120, Brown $0.98 $1.1366623324061 125 x 22mm, P24, Brown $1.23 $1.4266623324062 125 x 22mm, P36, Brown $1.23 $1.4266623324064 125 x 22mm, P60, Brown $1.06 $1.2266623324065 125 x 22mm, P80, Brown $0.98 $1.1366623324067 125 x 22mm, P120, Brown $0.98 $1.1366623324069 180 x 22mm, P24, Brown $1.98 $2.2866623324070 180 x 22mm, P36, Brown $1.98 $2.2866623324072 180 x 22mm, P60, Brown $1.69 $1.9466623324073 180 x 22mm, P80, Brown $1.56 $1.7966623324075 180 x 22mm, P120, Brown $1.56 $1.79


66261030651 100 x 16mm Rapid Strip D/C Disc $7.23 $8.32



RAPID STRIPSFast cutting action, with very little loading. Open web construction. Thick strong synthetic fibres & extra coarse grit. Easy cleaning and conditioning of surfaces. Long life.

TUFBAK DURITE SHEET T417 Premium, ultra fine silicon carbide abrasive, waterproof & best finish on wet clear-coat.

Code Description +GST Inclusive 63642595470 50mm Blaze Speedlok TR Disc P36 $1.98 $2.2863642595476 50mm Blaze Speedlok TR Disc P60 $1.98 $2.2863642595478 50mm Blaze Speedlok TR Disc P80 $1.98 $2.2866261043421 50mm Blaze Speedlok TR Disc P120 $1.98 $2.286364295479 75mm Blaze Speedlok TR Disc P36 $2.18 $2.5163642595481 75mm Blaze Speedlok TR Disc P60 $2.18 $2.5163642595493 75mm Blaze Speedlok TR Disc P80 $2.18 $2.5166261043425 75mm Blaze Speedlok TR Disc P120 $2.18 $2.51

BLAZE (CERAMIC GRAIN) SPEEDLOK TR DISCS

SPEND $100 EXCL.GST ON BAHCO FILES

DURING CALIPER V168AND RECEIVE A FREE PIZZA VOUCHER

• ERGONOMIC HANDLE • FULL RANGE AVAILABLE • MADE IN PORTUGAL

HANDY ROLL 40MM x 50MHigh flexibility for sanding contoured components. Tears easily from handy roll. Suitable for maintenance and general engineering use.


66623320797 (P40) Grit $38.37 $44.13

66623320798 (P60 Grit) $41.85 $48.13

66623320803 (P80) Grit $36.19 $41.62

66623320806 (P100) Grit $35.40 $40.71

66623320810 (P120) Grit $35.40 $40.71

66623320808 (P150) Grit $35.40 $40.71

66623320820 (P180) Grit $35.40 $40.71

66623320816 (P240 Grit) $36.25 $41.69

66623320814 (P320 Grit) $39.19 $45.07

6

$15565$179.00 GST Incl.

+GST

$11800$135.70 GST Incl.

+GST$15679$180.31 GST Incl.

+GST

GRAVITY SPRAY GUNW7014

Fully adjustable wide spray fan pattern control. Fluid tip 1.4mm.

Air consumption 7-9 cfm. Complete with 600ml cup. W7014-2 model

available with 2mm tip.

GOLD HIGH PRESSURE SPRAY GUNW7002S

Fully adjustable wide spray fan pattern control. Fluid tip 1.8mm. Air consumption 7-9 cfm. Ideal for both lacquers and enamels.

$12313$141.60 GST Incl.

+GST$16366


$14600$167.90 GST Incl.

+GST$2239


$1194$13.73 GST Incl.

+GST

EXTREME 9.2MM X 8M HOSE REELJP58.3067

Auto lock/auto rewind, hose layering system, brass fittings, 180 degree swivel wall mount bracket, leader hose 1M with brass fittings, adjustable hose stop.

MECHANICAL TYRE INFLATOR5120N

The Alemlube 51201N tyre inflator with gauge is heavy duty with an aluminium die cast body, impact absorbing bumpers and spiral protected air hose. Ideal for automotive, industrial and trade use, the 51201N incorporates slim ergonomic design features and is easy to use when inflating or deflating.Highly accurate, the 51021N with magnified sight glass clearly indicates dual scale pressure reading of 0-150psi (0-10bar) and 0-1050Kpa. Quality manufacturing and robust constructÚn ensures dependable and trouble free day-in, day-out use

946ML PRESSURE SPRAYERSRA1000

946ml / 32oz Red

POP UP SAFETY CONESFully collapsible cone, great for use on trucks.

WHR001 42cm WHR103 70cm

AIR COMPRESSOR 16CFM16RSE-DC

For heavy duty professional work. Quiet running. Dual control - Automatic STOP/START pressure switch control. Automatic free running air governor. 2.7 HP motor. Cast iron pump and cylinders. 445 lpm /15.7 cfm displacement / 300 lpm free air delivery. 1 year warranty.

BONUSFR05 Filter Reg &

HALF1010A Air Hose

$1,92000$2,208.00 GST Incl.

+GST

FUNNY BUSINESS FUNNY BUSINESS A Software Engineer, a Hardware Engineer and a Departmental Manager were on their way to a meeting. They were driving down a steep mountain road when suddenly the brakes on their car faÕed. The car careened out of control down the road, bouncing off the crash barriers, untÕ it miraculously stopped. The cars occupants, were shaken but unhurt stuck halfway down a mountainside in a car with no brakes. What were they to do? “I know,” said the Departmental Manager, “Let’s have a meeting, propose a VisŠn, formulate a MissŠn Statement, define some Goals and by a process of Continuous Improvement find a solutŠn to the Critical Problems, and we can be on our way.” “No” said the Hardware Engineer, “That wÕl take far too long, and, that method has never worked before. I’ve got my Swiss Army knife with me, and in no time at all I can strip down the car’s braking system, isolate the fault, fix it, and we can be on our way.”“Well,” said the Software Engineer, “Before we do anything, I think we should push the car back up the road and see if it happens again.”

16PC R/OE METRIC SPANNER SET WAT0766

This versatile trade quality set of ring spanners cover the small sizes from 8mm, right up to the larger sizes at 32mm.

BONUSLLS2255 - Tactical Flashlight Cree LED

PLIER SET 3PCGAAE0307

200mm Linesman, Long Nose & Diagonal Cutting. Professional quality. Ergonomic cushion grip handles.

$7350$84.53 GST Incl.

+GST

10 TONNE HYDRAULIC RAM265100

Hydraulic Ram & Nose PieceSize: 10 tonneOverall Length: 160mm

$13561$155.95 GST Incl.

+GST

7

$28900$332.35 GST Incl.

+GST

$33900$389.85 GST Incl.

+GST

$22900$263.35 GST Incl.

+GST

$21900$251.85 GST Incl.

+GST$4900


$18900$217.35 GST Incl.

+GST

$72900$838.35 GST Incl.

+GST

36V 125MM BRUSHLESS ANGLE GRINDERSHuge performance increase vs 18V grinders. Variable speed and Full Electronic safety features now required by most construction sites. Including electronic brake, anti-kickback, restart protection and increased overload protection. Kit supplied with 2 x 1080W High Output Multi Volt batteries, 32min Rapid Charge & Case.

G3613DB(G4Z) Bare Tool G3613DB(GRZ) Complete Kit

$34900$401.35 GST Incl.

+GST

HIKOKI METAL CUT OFF SAW 355MM 2000WCC14SF(G1Z)

355mm (14") Metal Cut-Off Saw. Double insulated, quick release vice 2000W.

$33900$389.85 GST Incl.

+GST

HIKOKI DRILL 13MM VSR HEAVY DUTY 800W W/CASED13VG(G1Z)

13mm High Torque Drill, Variable Speed, Reverse, Heavy Duty, Triple reduction gearBox gives high torque, low speed 0–600rpm, Carry Case (optional Angle Attachment) 800W.

HIKOKI 13MM HEAVY DUTY ENGINEERS DRILL 2SPD/VSRD13VL(G1Z)

Powerful 860W Motor, Highly durable AHB (Alloy Housing Body), Forward/Reverse carbon Brush rotation system, Safety slip clutch.

$28900$332.35 GST Incl.

+GST

MULTI VOLT B-BATTERY 18/36V HIGH POWER 1440W (21700)BSL36B18

Massive 1440W Power Output Battery, New High Powered, High Capacity 21700 lithium cell structure, Intelligent circuitry changes voltage between 36V and 18V automatically, Significantly reduces heat and stress on tool components, Smart-tech Cooling Chassis, keeps cells cool under load, Smart battery indicator technology,

Long Life - up to 1500 recharge cycles, 52min Rapid Charging using Rapid Smart Charger (UC18YSL3), Compatible with most 36V and 18V HiKOKI / Hitachi tools*

$22900$263.35 GST Incl.

+GST

36V BRUSHLESS HIGH POWERED 3PC KITKC36DRGL(GKZ)

Supplied with: DV36DA - 36V High Powered 138Nm Impact Drill WR36DB - 36V 1/2" High Torque Impact Wrench 1050Nm G3613DB - 36V 125mm High Powered Angle Grinder 2x 1080W High Output Multi Volt batteries, 32min Rapid Smart

$1,36900$1,574.35 GST Incl.

+GST

Charger & Cases

18V BRUSHLESS MULTI TOOL - BARE TOOL C/W 12 PC ACCESSORY SETCV18DBL(G4Z)

High Oscillation Speed For faster Cutting, but unique new design. Produces low vibration back To the operator. Standard Accessories: 2 Blades, Sanding Pad, 9 Pces Sandpaper. Compatible with all HiKOKI & Hitachi Batteries

125MM ANGLE GRINDER HEAVY DUTY 1200W - PADDLE SWITCHG13SE2(G1Z)

125mm (5”) Angle Grinder, Heavy Duty, Quick adjust Guard, 1200W Paddle switch

125MM ANGLE GRINDER ERGO 1200W (SLIMLINE)G13SW(G1Z)

New Slimline Model. Anti-vibration Handle. Quick Adjust Guide. Side Mounted Switch.

$33900$389.85 GST Incl.

+GST

HIKOKI GODZILLA SUPER SABRE SAW 1050WCR13VB(G1Z)

130mm ‘GODZILLA’ Sabre Saw, Tool-Less Blade change, Variable Speed, swing action, Carry Case 1050W.

HIKOKI 230MM ANGLE GRINDER 2200WG23SW2(G1Z)

High-performance 2200W Motor, High overload durability due to new heat resistant motors, New labyrinth air vent design provides more protection for motor from grit and dirt contamination, Soft grip trigger handle, Supplied without grinding wheel.

41 PCE IMPACT & SOCKET BIT SET752500

includes 10 Impact Sockets (8-22mm), Socket Adaptors, 28 Assorted Driver Bits

8

$86870$999.00 GST Incl.

+GST

18V 5.0AH IMPACT WRENCH COMBODLX2233TJ

LXT 2pc 18V 5.0Ah Impact Wrench Kit includes: • DTW1002 Cordless Impact Wrench. • DTW285 Cordless Impact Wrench. Included

accessories: 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Makpac carry case #3 (197052-1)

18V LXT CAULKING GUN 300 & 600ML - SKIN ONLYDCG180ZX

• Variable speed control by dial and trigger switch for maximum control of sealant flow rate.

• Anti-drip function stops excess from oozing out just on release of the switch trigger.

• Rubberized soft grip provides comfortable grip and better control.

• ZX - Includes both 300ml and 600ml holders, pistons and rams

ENERGIZER PIVOT PLUS LIGHTE300689000

ENERGIZER MAX AA BATTERIES 8PKE000042500

ENERGIZER MAX AAA BATTERIES 8PKE300573600

BONUS5.0Ah Battery

18V CORDLESS 2PC HAMMER DRILL DRIVER / IMPACT DRIVER KITDLX2180X

LXT 2pc 18V 3.0Ah Brushless Hammer Drill Driver / Impact Driver Kit includes• DHP484 Cordless Hammer Drill Driver. • DTD153 Cordless Impact Driver. Included

accessories: 2 x 3.0Ah batteries (BL1830), Charger (DC18RC), carry case.

18V LXT BL ROTARY HAMMER SDS+- SKIN ONLYDHR171Z

• BL Motor Delivers 0-680 RPM, 0-4,800 BPM and 1.2 Joules of Impact Energy for Faster Drilling.

• BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.

• 2-Mode operation for

"Rotation Only" or "Hammering with Rotation" for multiple applications.

• Depth gauge for increased drilling consistency.

• Conveniently located push button for rotation reverse $52087


18V LXT BL ROTARY HAMMER SDS+- SKIN ONLY

"Hammering with Rotation" for multiple applications. Depth gauge for increased

Conveniently located push button for rotation reverse

BONUS3.0Ah Battery

$19652$226.00 GST Incl.

+GST

$32957$379.00 GST Incl.

+GST

$4608$52.99 GST Incl.

+GST

$4843$55.70 GST Incl.

+GST

$1130$12.99 GST Incl.

+GST$1130


HSS DE PANEL DRILLS• Developed to drill holes

for rivets in flat and curved panels and used in sheet metal fabrication.

• Tupoint increases drill life. • Designed for shallow hole drilling no

deeper than 1.25mm x diameter. • 135° self centering point minimises

wandering when starting.

Code Size +GST Inclusive111821 1/8" $2.04 $2.35115975 3.3mm $2.04 $2.35115991 4.1mm $2.50 $2.87116017 4.9mm $2.96 $3.40

COUNTERSINK SET HSS 3 PIECE107CS0003

90° three flute. Made from high speed steel. Made to DIN335 specifications. For use in portable and pedestal drilling machines. For cutting steel, tool steel, stainless steel, cast iron, brass & aluminium.

5PC CARBIDE BUR SET918CRSET5M

Made from solid carbide (K30). Shank = S45C Steel.Double cut bur allows for rapid stock removal in harder materials. Chisel tooth pattern. 6mm shank.Includes: 12mm x Cylindrical (Square), Cylindrical (Radius), Tree (Radius), Tree (Pointed) and Flame.

INOX 19 PIECE DRILL SETD180SM2

• Specialised design achieves 70% more life in stainless steel than standard drill bits.

• Futura Nano PVD coated tip for ultimate wear resistance.

• Short flute with fast spiral for maximum rigidity & swarf control.

• Unique point and stepped core design for superb penetration and minimal work hardening.$20179


$306$3.52 GST Incl.

+GST

$13123$150.92 GST Incl.

+GST

AGRICULTURAL PVC BLACK JOINING TAPE 48MM X 30MFT3481

$1700$19.55 GST Incl.

+GST

350PC CABLE TIE ASSORTED PACK - COLOUREDCT350C

All Nylon one piece construction.Size: 100 x 2.5mm (200 ties) - 200 x Natural Size: 200 x 3.6mm (100 ties) 20 each x Red, Yellow, Blue, Green & UV Black Size: 300 x 4.8mm (50 ties) 10 each x Red, Yellow, Blue, Green & UV Black UL Approved.

9

$1418$16.31 GST Incl.

+GST$4898


$799$9.19 GST Incl.

+GST

5.56 AEROSOL 400ML5005

Lubricates moving parts for smooth action. Breaks through rust and corrosion. Displaces water from wet equipment. Protective film for ongoing corrosion protection. Complete with applicator. MPI Approved C14.

BLACK ZINC 400ML2089

BLACK ZINC 1 LITRE2189

$1381$15.88 GST Incl.

+GST

$1050$12.07 GST Incl.

+GST

$1169$13.44 GST Incl.

+GST

$990$11.39 GST Incl.

+GST

BLACK ZINC 1 LITRE

PENETRAT8 HI SPEED PENETRANT 500ML5501

An industrial strength low viscosity lubricant and penetrant. Quickly loosens and frees seized, bound or frozen fasteners. Extreme penetrating action. Improves performance and operating efficiency. Inhibits corrosion. Safe on metals and most plastics, rubbers and paints. Temperature range up to 120°C.

GLASS CLEANER AEROSOL 500ML3070

Professional formula, Sparkling streak-free finish for all glass surfaces. Contains no CFC’s. Quick and easy removal of tough dirt and grime including grease, finger prints, bugs and smoke haze.

LIQUID ARMOUR 500ML TRIGGER5022

Protects and restores a number of surfaces. • Long-lasting, non-greasy

protection and sheen – Repels water, guards against cracking,

dulling, fading and UV

damage.• Surfaces become anti-static –

Repelling dust and dirt. • Non-toxic, non-flammable,

pleasant fragrance• Use on vinyl, leather, rubber,

plastic, fiberglass, chrome, dashboards and wood

• UV protection

808 SILICONE SPRAY- 500ML3055

A multi-purpose silicone spray. Clear, non-staining, odourless film. Revives, waterproofs, lubricates. Excellent mould release, parting agent, machine bed lubricant. Ideal for use on metals, plastics, rubbers, fabrics, wood, glass and painted surfaces. Temperature Range -38°C to +290°C. MPI Approved C12.

400ML GALV TOUCH UP2083

Colour matched to new galvanised steel.Convenient aerosol application. Durable Epoxy Coating. Corrosion resistant coating. Touch Dry in 15 minutes. High aluminium content. Epoxy binder.

$991$11.40 GST Incl.

+GST

BRAKLEEN 600GM5089

Removes contaminants from industrial machinery, brake linings, pads, drums and callipers. Non-staining, non-corrosive and leaves no residue. MPI Approved C12

Rust inhibitor

Non-toxic

Biodegradable

Powerful

pH Neutral

Non-corrosive

Solvent free

7

$1240$14.26 GST Incl.

+GST$4402


750ML EXOFF DEGREASER & PARTS CLEANER3410

5L EXOFF DEGREASER & PARTS CLEANER3412

EXOFF DEGREASER & PARTS CLEANER 20L3413

DEGREASER & PARTS


5L EXOFF DEGREASER & PARTS CLEANER

EXOFF DEGREASER & PARTS CLEANER 20L3413

$1500$17.25 GST Incl.

+GST

$17018$195.71 GST Incl.

+GST

RTV SILICONE SELECT-A-BEADFor sealing, bonding protection in metal and electrical working and HVAC applications. Bonds solidly throughout a temperature range of -34°C to 232°C Resists sagging and slumping when applied overhead or on sidewall joints

14059 - RED

14060 - GREY

14072 - BLACK

$2840$32.66 GST Incl.

+GSTEACHEACH

5089 5087

101

ARC2OO

C/w Arc Lead Set x 4m & Carry Bag. Tig Torch is Optional & Extra. $799.00 GST Incl.

$69478XA-ARC200RZ-SP

RAZORWELD ARC200PFC200 AMP MMA-TIG DC WELDERPOWER FACTOR CORRECTIONMASSIVE 78 OCV KICK START• 200 Amp - 230V• Selectable VRD • Latest PFC Technology• Electrode Hot Start, Arc Force • DC TIG - Lift Arc• Generator Compatible - 9.0 KVA• Compliant to AS/NZ 60974-1

Duty Cycle @ 40°C 30% @ 200A @ 25°C 50% @ 200ACurrent Range 10 - 200ARated Power 9.0 KVA Weight 6.5KgDimensions (mm) 365x135x227

BONUSGeneral Purpose Electrodes

MONTH 36Machine Warranty

Razorweld MIG25OWRZRAZORWELD MIG250WRZ250 AMP - 230V MIG-TIG-MMA WELDERPUSH-PULL & SPOOL GUN READY• MIG Gas/Gasless, 15kg Spool Capacity• Burn Back Control• Variable Inductance Control• Wire Inch• Spool Gun Ready • Inbuilt Cylinder Rack • DC TIG - Lift Arc Ignition• MMA Electrode Hot Start• Compliant to AS/NZ 60974-1

Power Supply 230V - 1PhDuty Cycle @ 40°C 35% @ 250A @ 25°C 60% @ 250A Current Range MIG 30 - 250ACurrent Range MMA 10 - 250A Dimensions (mm) 900x400x785Weight 58Kg

C/w 4m Mig Torch, Arc Set and Regulator. Tig Torch is Optional & Extra. $2,249.00 GST Incl.

$1,95565XA-MIG250WRZ-K

MONTH 36Machine WarrantyBIG

Razorweld MIG35OSWF

• 4 Roll Separate Wire Feeder • 10m Interconnecting Cables • MIG Inductance & Burn Back Control• MIG Crater Current Control • 2T/4T Trigger Function• MMA Arc Force Control• DC TIG Lift Arc Function • Approved to AS/NZ 60974-1• Heavy Duty Trolley, Cylinder Rack

Adjustment of Voltage & Wire Feed at the Wire Feeder make for easy setting of the welding parameters with the convenience of remote adjustment from the power source.

C/w 4m Mig Torch, Arc Set and Regulator Tig Torch is Optional & Extra.

350 AMP MIG-TIG-MMA WELDERSEPARATE 4-ROLL WIRE FEEDER

RAZORWELD MIG350SWF

XA-MIG350SWF-K

$4,999.00 GST Incl.

$4,346 96


Power Supply 415V - 3 PhaseDuty Cycle @ 40°C 40% @ 350A Current Range MIG 50 - 350A Current Range MMA 20 - 350A

45 AMP PLASMA CUTTER, 230V16MM CLEAN CUT ON STEEL

RAZORCUT PLASMA CUT45

C/w SC80 x 6m Plasma Torch, Earth Lead, Spares Kit.

• 45 Amp @ 35% Duty Cycle• PFC - Power Factor Correction• Pilot Arc Non Contact Start• Air Requirement - 6.7cfm @ 75psi• 4T Function for Automatic Use • Pre-set Air with Auto Drain• Weighs only 5.2Kg • Generator Compatible - 5.5KVA • Compliant to AS/NZ 60974-1• 3 Year Machine Warranty

PlasmaCut45

$1,840.00 GST Incl.

$ 1,60000XA-CUT45RZ-SP

BONUS PLASMA FILTER Improves cut quality. Extends electrode & cutting tip life.

$1,969.00 GST Incl.

$1,71217XA-MIG205SS-SP

Choose your wire size and gas type & turn the amps up or down as required.

C/w 3m MIG Torch, Arc Set, Regulator, Carry Bag & Suregrip TIG Torch - Strictly Limited Offer.


RAZORWELD MIG205-SS

• Multifunction MIG/TIG/MMA• 200 Amp - 230V• New IGBT 40KHz Inverter Technology• MIG Gas/Gasless, 5kg Spool Capacity • Smart Set or Manual Operation • Spool Gun Ready • DC TIG – Lift Arc with Euro Connect Torch• TIG Gas Solenoid, Post-Gas & Downslope• Electrode Hot Start• Compliant to AS/NZ 60974-1 Duty Cycle @ 40°C 25% @ 175A Duty Cycle @ 25°C 50% @ 175ACurrent Range MIG 30 - 200ACurrent Range TIG-MMA 10 - 200ARated Power 9.4 KVADimensions (mm) 470x190x380Weight 18.0Kg

Contains XA26x4m TIG Torch with Euro Connection, Torch Parts & Tungstens.

Euro Connection

2O5-SSSMART SET

Razorweld

BONUSTIG Torch Kit

5000X AIR-FED AUTO HELMET WITH RESPIRATORY PROTECTIONThe RWX5000 welding helmet incorporating the air purifying respirator offers the welder all the benefits of the wide view digital control helmet with an air flow system designed for all day use.

• Long lasting P3 filter • Auto shutdown mode • 3 airflow levels • Blocked filter, low airflow alarm • Low battery alarm • Side or rear mount of blower unit• AS/NZS 1716:2012 approved• Warranty 1 year - Blower Unit• Warranty 2 years - RWX5000 • Low cost consumablesIncludes fitted RWX-5000 Digital Automatic Helmet.

$1,179.00 GST Incl.

$1,02522

Razorweld RWX5OOOP.A.P.R SYSTEM

ULTIMATE PROTECTION FORWELDING & CUTTING FUMESSTANDARDS APPROVEDAS-NZS 1716:2012

XA-PAPR

Razorcut

Welding and hot cutting produces metal and fluxing fumes made up of toxic gases and very fine particles. Inhaling welding fumes can cause ill health. • ACUTE BRONCHITIS • AIRWAY IRRITATION • OCCUPATIONAL ASTHMA • CANCERS • PNEUMONITIS• METAL FUME FEVER • COPD - CHRONIC OBSTRUCTIVE PULMONARY DISEASE • PNEUMOCONIOSIS

WORKSAFE NEW ZEALAND WARNINGPROLONGED EXPOSURE TO WELDING FUMES IS A SERIOUS HAZARD TO WORKERS RESPIRATORY HEALTH.

https://worksafe.govt.nz/dmsdocument/647-welding-and-local-exhaust-ventilation

Razorweld

112

AS6000F AUTOMATIC HELMETLARGE VIEWING AREA

$149.00 GST Incl.

$ 12957AS6000F

TRUE COLOUR LENS• MIG/MMA/TIG Compatible• Battery & Solar Powered • Replaceable Batteries• Large Viewing Area - 100mm x 60mm• Four Independent Sensors• Grind Mode Function• Variable Shade 4/9~13• Adjustable Sensitivity & Delay Controls• Fast Switching Speed 0.08 m/s• Compliant to AS/NZS 1338.1

OUTSTANDING VALUE!

XA-5011 ADF Analog Control PanelWARRANTY2Years

WARRANTY2Year

WARRANTY2Years

Code Descr ip t ion +GST Inclusive

ESR1125-25P Magmaweld 6013GP E lec t rode 2.5mm 2.5kg $19.13 $22.00

ESR1132-50P Magmaweld 6013GP E lec t rode 3.2mm 5.0kg $31.30 $36.00

ESR11 GENERAL PURPOSE 6013 ELECTRODE

Magmaweld ESR11 is an extremely easy to use G.P electrode with great start and restart properties, smooth arc, self-lifting slag with superb weld appearance. Suitable for all position welding with excellent X-Ray qualities. Excellent also for galvanised, dirty and rusty steels.

SUPERB GENERAL-PURPOSE ELECTRODE NOW PACKED IN A UNIQUE SCREW TOP PLASTIC CANNISTER

316LSI STAINLESS STEEL TIG FILLER WIREIN CONVENIENT 1KG HANDY TUBES

Code Descr ip t ion +GST Inc lus ive

XA316L-R1-10 1.0mm 316LSi T IG Wi re 1kg Tube $33.91 $39.00






• Flame Retardant Cotton Sateen Body• Select Cowhide Leather Sleeves• Light Weight • Great manoeuvrability• Leather Spatter Guards • Dieletric Insulated Domes• KEVLAR Thread Stitching • Roll Up Collar with Hook & Loop• FR Cotton Lined Collar• Sizes XL XXL XXXL

Code Size +GST Inc lus ive

AP-2530 XL XL $77.39 $89.00

AP-2530 XXL XXL $82.61 $95.00

AP-2530 XXXL XXXL $86.09 $99.00

STEEL BLUE WELDING JACKETWELD IN COMFORT

Electrode Sizes: Round: 4.0mm - 12.7mm, Flat: 15.9mmAir Requirement: 80 PSI @ 25 CFM / 5.6 KG/CM² @708 L/MIN


DGC40305 DC Carbon 4.0 x 305mm x 100pcs $42.61 $49.00





ARC AIR GOUGING TORCH

DC ARC AIR GOUGING CARBONS COPPER COATED

Copper coated carbon for gouging & cutting with DC current. Provides high efficiency at low consumption. For use in removal of residual casting material & weld defects. Also cuts bronze, stainless steel & copper.

$295.00 GST Incl.

$25652

• Hi-Vis Orange Body • Reflective Taped• Select Cowhide Leather Sleeves• Flame Retardant Cotton Sateen Body • Leather Spatter Guards • Dieletric Insulated Domes• KEVLAR Thread Stitching • Roll Up Collar with Hook & Loop• FR Cotton Lined Collar• Sizes XL XXL XXXL

Code Size +GST Inc lus ive

AP-2730 XL XL $103.48 $119.00

AP-2730 XXL XXL $112.17 $129.00

AP-2730 XXXL XXXL $120.87 $139.00

SAFETY ORANGE WELDING JACKET IDEAL SITE-WELDING JACKET

PYREX GAS LENS KITSNEW PRODUCT!


PGLK172616S Pyrex Gas Lens K i t Medium Nozz le 1.6mm 17,18,26 Torch $25.00 $28.75

PGLK172624S Pyrex Gas Lens K i t Medium Nozz le 2.4mm 17,18,26 Torch $25.00 $28.75

PGLK172616L Pyrex Gas Lens K i t Long Nozz le 1.6mm 17,18,26 Torch $27.74 $31.90

PGLK172624L Pyrex Gas Lens K i t Long Nozz le 2.4mm 17,18,26 Torch $27.74 $31.90

PGLFBK172616 Fat Boy Pyrex Gas Lens K i t 1.6mm 17,18,26 Torch $56.00 $64.40

PGLFBK172624 Fat Boy Pyrex Gas Lens K i t 2.4mm 17,18,26 Torch $56.00 $64.40

Pyrex Gas Lens KitMedium Nozzle

Pyrex Gas Lens KitLong Nozzle

Fat Boy Pyrex Gas Lens Kit Great for titanium!

K4000

Pyrex gas lens nozzles are ideal for TIG welding applications with limited visibility, such as in and around tubing and pipe as well as inside corners and bends. Pyrex gas lens nozzles also allow reduced shielding gas consumption, with savings of up to 40% compared to using traditional parts. The tungsten adaptor with replaceable mesh screen ensures a consistent gas flow pattern and allows the tungsten electrode to be extended up to six times the electrode diameter.

• Clear Pyrex Nozzle for excellent visibility • Tungsten stick-out up to 6 times tungsten diameter• Push on Pyrex Nozzle • Fits most standard silicone rubber torch bodies

• Save up to 40% gas consumption • Kits supplied in convenient clip down plastic case• Low cost replaceable Screen Adaptor • Individual parts available

Kits to suit 3.2mm Tungsten and 9,20 Torches also available on request.

12

ROTARY ACTION DRUM PUMP501AZinc alloy impellars make the pump suitable for the transfer of diesel, petrol, kerosene, unleaded petrol and low viscosity oils. Delivery rates of 18 L/min or 0.26L per rotation. Can syphon and transfer fuels and lubes in reverse. Includes 2.2m of antistatic hose, bung adaptor, rubber gasket, four chamber rotor assembly, spout and spout holster.

$13826$159.00 GST Incl.

+GST

diesel, petrol, kerosene, unleaded petrol and low viscosity oils.

Can syphon and transfer fuels and lubes in reverse. Includes 2.2m of antistatic hose, bung adaptor, rubber gasket, four chamber rotor assembly, spout and spout holster.

$6870$79.00 GST Incl.

+GST

LEVER ACTION GREASE GUN 450GM600A

Develops grease pressures of up to 12,000psi (828bar). Delivers up to 1.6g of grease per stroke. Large diameter piston with a long lever travel facilitates high volume greasing. High volume, high pressure greasing guaranteed. Manufactured in Germany.

BRAKE CLEANER SPRAY BOTTLE6603A

Robust construction and ergonomic design Preset functionality Resistant to oils, most hydrocarbons and solvents 1.0L capacity Strong translucent bottle with level indicator Industrial quality manufactured in Spain Wide filling opening reduces spills Adjustable conical spray nozzle 2.5 bar safety valve with depressurisation option Protective valve chamber sleeve Easy tool free maintenance.

20KG GREASE KIT AIR OPERATEDG100120

• Effortless greasing• Heavy duty grease control

valve• 4m long hose assembly• Affordable and robust• Delivers up to 600g/min• Tested to up to 24,000kg• Maximum fluid pressure of

5,800psi (400bar)• All types of grease up to

NLGI2• Air consumption of 3.6cfm

at 150psi• Air inlet pressure from

70psi (5bar) to 150psi (10bar)

• Noise level of 82dB• Low cost of ownership• Spare parts readily

available

EL SERIES AIR OPERATED 205LTR OIL KIT WITH METERO30050

• Double acting pump with a differential air motor ensures smooth and constant oil delivery

• Smart design with fewer moving parts

• Delivers up to 10L/min• Maximum operating pressure of

450psi (30bar)• Maximum oil viscosity of SAE130• Oil control valve with meter

• Air consumption of 3.6cfm at 150psi• 1/2" BSP(m) oil outlet• 1/4" BSP(f) air inlet• Inlet filter protects against foreign

particle contamination• Tested to 600,000L• Noise level of 82dB• Saves time and increases

productivity• Low cost of ownership

INDUSTRIAL GREASE NIPPLE KIT - 101PCL4675

$5223$60.07 GST Incl.

+GST

$59183$680.60 GST Incl.

+GST

$70290$808.33 GST Incl.

+GST

$6300$72.45 GST Incl.

+GST$8700


$26866$308.96 GST Incl.

+GST

$6642$76.38 GST Incl.

+GST

TRIGGER ACTION GREASE GUNG10010N

Alemlube EL Series Grease guns. 450gm cartridge or bulk fill. Robust die cast head. Heavy duty 4 jaw coupler.

$3788$43.56 GST Incl.

+GST

$3300$37.95 GST Incl.

+GST

HEAVY DUTY LEVER ACTION GREASE GUNGZ42780450gm10,000psi

VARIO PISTOL GREASE GUN 450GMGZ43088Ergonomic one hand operation. Variable stroke mechanism for both High Volume or High Pressure.7000psi

HAND ROTARY BARREL PUMPGZ44052

Fits 15 gallons (50 litre) to 55 gallons (205 litre) barrels. Comes complete with suction tube, 2” cast iron bung nut & discharge spout. For dispensing Diesel, Kerosene, Heating Oils, Motor Oils, Lubricating Oils (up to SAE 90), and other non-corrosive media.

STOCK PICKERSPR002

Platform Size 945 x 650mm.Top Shelf Height 145 - 750mm.Overall Height 840mm.Handle Height 840mm.Wheel Size 125mm. Capacity 250kgs.

CASTOR 100MMBlue Rebound Polyurethane wheel150kg

$1164$13.39 GST Incl.

+GST

R4605

Fixed Castor

$1418$16.31 GST Incl.

+GST

S4604

Swivel castor

$1612$18.54 GST Incl.

+GST

S4604B

Swivel/braked castor

13

When failure isnot an option.

In business, failure is costly. In machinery, failure is catastrophic. Mobil oils protect equipment with superior lubricant technology, leading to fewer failures, which leads to a much more positive outcome – enhanced productivity.

When failure isWhen failure isWhen failure is

140711

$1,197.44 Inc GST$1,041.25

+GST

13055B

$59.99 Inc GST$52.17

+GST

140709

$128.30 Inc GST$111.57

+GST

130425

$107.81 Inc GST$93.75

+GST

135082

$64.99 Inc GST$56.51

+GST

140140

$299.00 Inc GST$260.00

+GST

121829

$1,063.75 Inc GST$925.00

+GST

135091

$269.99 Inc GST$234.77

+GST

MOBIL GREASE XHP 222 GREASE GUN PACK OR 16KG

MOBIL DELVAC MX ESP 15W-40 20LT OR 208LT

MOBIL DTE 25 20LT OR 208LT

MOBIL ANTIFREEZE EXTRA 4LT OR 20LT

• Mobilgrease XHP 222 greases are extended service lithium complex greases

• Superb resistance to water washout and spray-off• Highly adhesive and cohesive structure• Excellent rust and corrosion resistance.

• Extra high performance diesel engine oil • Outstanding performance in modern high

output low emission engines including those with exhaust gas recirculation and diesel particulate filters.

• Excellent oxidation stability helps reduce maintenance• Enhanced anti-wear and corrosion protection• Controlled demulsibility protects systems

from small and large quantities of water.

Inhibitors designed to give a high degree of corrosion protection to engine components such as radiators, cylinder blocks/heads and water pumps.

4LT

20LT

20LT

GREASE GUN PACK

20LT

208LT

208LT

16KG

14

RUST CONVERTER 1LTRCONR-1

Bulk 1 Litre size for frequent users and large projects. Converts the rust into inert dust and detaches it. Protects metal from further enemy attacks. Leaves an ideal paint base.

UNIVERSAL BLUE GASKET & JOINTING COMPOUND - 100GMHYLO100

GALMET KEYTITE ETCH PRIMER GREY 350GGKEGA350

Epoxy/Vinyl Etch primer that etches and passivates ferrous and non-ferrous metals. Offers excellent topcoat adhesion and is compatible with most single and two pack finishes. • Ideal for galvanised iron,

Stainless steel, Aluminium & most alloys

• Single pack – easy to apply

• Fast dry – same day topcoat

• Topcoat with Galmet Spraypaint

JN85 HYLOMAR AEROSOL 200ML

HYLO-200

EXTREME SIMPLE GREEN® AIRCRAFT & PRECISION CLEANER CONCENTRATE 3.78LSG13406

• Cuts through tough greases, oils, built-up grime and residue on aircraft, equipment, engines, machinery, wind turbines and more. Septic Safe Formula.

• Meets a variety of aircraft testing specification including the BOEING SPEC D6-17487P.

CRYSTAL SIMPLE GREEN® INDUSTRIAL CLEANER & DEGREASER CONCENTRATE 4LSG19003

• Highly versatile formula than can be used full-strength or in various dilutions* on all washable/water-safe surfaces including metal, concrete, rubber, synthetic and plastic.

• Septic Safe. No added colour or fragrance.• An NSF Certified product for use as a general cleaner

on all surfaces in and around food processing areas – Categories A1, A2, A4, A8, B1, C1.

SUPREME HEAVY-DUTY CLEANER & DEGREASER CONCENTRATE 4LSG13491

• Formulated for heavy-duty degreasing tasks such as engines, machinery, manufacturing equipment, dip tanks, HVACR coils and cooling towers.

• Septic safe. Concentrated formula• Removes machining oils and cutting fluids

from manufactured parts and extruded tubing.

SIMPLE GREEN® HAND CLEANER GEL 199MLSG42675

• Remove grease, grime, dirt, oil, wet paint, tar, soot, carbon and much more.

• Deodorise hands from the lingering smell of grease, oil, paint or even fish and food odours.

• Great for use in service bays, machine shops, MRO, commercial and industrial facilities

• Global Proficiency approved.• Use with or without water.

GALMET KEYTITE ETCH PRIMER GREY 350G

$5910$67.97 GST Incl.

+GST$2090


$1560$17.94 GST Incl.

+GST

$3523$40.51 GST Incl.

+GST

$5783$66.51 GST Incl.

+GST

$2531$29.11 GST Incl.

+GST

$6121$70.39 GST Incl.

+GST

$734 $8.44 GST Incl.

+GST

PVC ELECTRICAL TAPE 18MM X 20M

66623324545 White 66623324546 Yellow/Green 66623324547 Green 66623336457 Black 66623336458 Red66623336459 Blue66623336461 Yellow

ROCOL COPPER ANTI-SEIZE 500GRY480431

A soft paste containing friction-reducing solids. Designed to prevent seizing and galling of threads and other mating surfaces in wet, dirty corrosive conditions, or where high temperatures (up to 1100°C) or vibration is of concern. Excellent water resistance and contains no leaded additives. MPI Approved C14. $49.09 GST Incl.

+GST$4269

BONUSBUY 1 500G CAN

& RECEIVE A 150G TUBE

CLOTH TAPEStrong and versatile yet easy to tear by hand. Limitless uses for repairing, binding, bundling, sealing, insulating and reinforcing. Code Description +GST Inclusive

66623336603 Black Cloth Tape 50mm x 15m - 50 Mesh $6.42 $7.38

66623336605 Silver Cloth Tape 50mm x 15m - 50 Mesh $6.42 $7.38

66623336613 Black Cloth Tape 50mm x 25m Roll $7.56 $8.69

66623336616 Silver Cloth Tape 50mm x 25m Roll $7.56 $8.69

66623322255 Black Cloth Tape 50mm x 50m $13.57 $15.60

66623322256 Silver Cloth Tape 50mm x 50m $13.57 $15.60

MEASURING TAPES


TA3320 3m Pocket Measuring Tape $10.46 $12.03



TA3335 Tape Measure 10m $25.00 $28.75

HEAVY DUTY CLOTH TAPE - 48MM X 30MIdeal for masking products to be sand blasted, lane marking, tarp repairs, display industry and perfect as a race tape. And many other applications where a heavy duty cloth tape is required.

FT1481 SilverFT1482 BlackFT1483 White

FT1484 Red FT1485 YellowFT1486 Blue

$1.30 GST Incl.+GST

$113

$7.64 GST Incl.+GST

$664 EACH

EACH

15

SCREWDRIVER GO THROUGH SET 10PCWSS5012

‘Go-Through’ shaft to absorb impact, providing greater striking force. Chrome vanadium hex shaft with sand blasted magnetic tips. Includes Phillips, Slotted, Robertson.

SCREWDRIVER SET 14PCKT35114MR01

With phillips and flat tip screwdrivers. Includes an insulated pozi screwdriver.

RATCHET C HOOK WRENCH SET315161• Adjustable head allows multiple angles

to be used in confined areas where leverage is limited.

• Interchangeable for multiple size heads.

CROWSFOOT WRENCH SET METRIC 301191Metric 15 piece 3/8” dr. Sizes 10mm to 26mm contained in a blow molded box. The ideal tool in restricted confined areas.

CROWSFOOT WRENCH SET 14PC 27 - 50MM

301465Straight jaw. 1/2” Square Drive. Size range: 27–50mm. 14 piece

set supplied in a protective blow mould storage case.

CIRCLIP PLIER SET 6PCKT42116GP

3 PCE PLIER SETKT42213GP01

Set Includes 6111-08 Combination Plier, 6311-08

Long Nose Plier, 6231-08 Heavy Duty Diagonal Cutting

Nipper.

WIRE TWIST PLIERS301103

• For installation and twisting of steel fixing wire (up to 1.6mm)

• Features wire cutter, serrated gripping zone, tapered jaw for confined area access and wirelock and twist return mechanism

• Manufactured from drop

forged alloy steel for superior strength and durability

• Handle: Steel• Jaw opening: 0-21mm• Jaw width: 10mm• Overall length: 170mm

END NIPPER PLIERS 200MM (8")PLIE-T28322

• Chrome Vanadium steel with black handle• Traditional design featuring wide cutting edges• Double-hardened cutting edges• Ideal for ripping and cutting wires

CABLE CUTTERCC60A

Curved blade design delivers a clean cut without causing distortion of the cable or frayed ends. Suitable for use on copper and aluminium cables up to 70mm². Not suitable for steel wire or wire ropes. Manufactured from drop forged alloy steel for superior strength and durability. Handle: PVC dipped. Length: 230mm (9"). Cutting range (max): 70mm²

PLIERSBuilt to exceed ANSI specifications. Double dipped cushion grip handle for a sure comfortable grip.

$5130$59.00 GST Incl.

+GST

$6375$73.31 GST Incl.

+GST$5900


$6300$72.45 GST Incl.

+GST

$18148$208.70 GST Incl.

+GST

$11300$129.95 GST Incl.

+GST$27582$317.19 GST Incl.

+GST

$12957$149.00 GST Incl.

+GST$6418


$1777$20.43 GST Incl.

+GST

$3063$35.22 GST Incl.

+GST

Code Size / Description +GST Inclusive640387HS 175mm/7" Sidecutting Pliers $11.74 $13.50640393H 200mm/8" Longnose Pliers $10.39 $11.95640408 Pliers 200mm Linesman $22.17 $25.50

C HOOK WRENCHES

Code Description +GST Inclusive315150 C-Hook Wrench 3/4 - 2" $37.91 $43.60315151 C-Hook Wrench 1.1/4 - 3" $56.43 $64.90315152 C-Hook Wrench 2 - 4.3/4" $70.03 $80.53

• Includes both hook and pin type configurations.

• Ideal for automotive, industrial, plumbing and agriculture applications.

• Manufactured from drop forged chrome vanadium steel for maximum strength and durability.

• PVC dipped handle provides a secure and comfortable grip.

• Size range: Ø 19mm-166mm

Code Description +GST InclusiveWSG1607 Weldsafe Gold Fire Metal Welding Helmet $60.00 $69.00WSG1609 Weldsafe Gold Knight Welding Helmet $60.00 $69.00WSG1714 Weldsafe Gold Fire Pit Welding Helmet $60.00 $69.00

AUTO DARKENING WELDING HELMETS - GOLD SERIESProfessional true colour quality screen & filterLarge viewing screen (96mm x 39mm)Grinder or welding functionVariable shade; 9-13, 2 Arc Sensors suitable for Mig and Arc Welding.

$4329$49.78 GST Incl.

+GST

+GST

$22.17 $25.50

HEX BIT SOCKET SETS 1/2” DR

GAAD1007 10pc - 55mm long Includes 4 - 19mm

GAAD0905 9pc - 80mm long Includes 4 - 17mm.

16

219PC TOOL SET 9 DRAWER (RED)KT911-000CR9

219pce tool chest set. Contains: • KT87411-9B - 9 drawer tool box• KT9-7069CR01 - 69pce 3/8"

& 1/2" drives socket set• KT9-42114GP - 4pce circlip plier set

$1,53692$1,767.46 GST Incl.

+GST

• KT9-40102GP - 2pce plier set

• KT9-2548CR01 - 48pce 1/4" drive socket set

• KT9-90128SR - 28pce wrenches, punches, chisels & ball pein hammer

• KT9-90138CR - 38pce wrenches• KT9-90129CR - 29pce screwdrivers,

pliers & hex key sets

COMBINATION SET 3/4" DRIVE 27PCKBT1175

Trade Quality, industrial 3/4" Dr Set, made in Taiwan, Sockets: 22 to 50mm, 7/8 to 2".

CHAIN BREAKING & RIVETING TOOL KITBS6943

Breaks chains from #35 to #630, Kit contains 3 pins sizes for most chains, Features hardened body, Kit includes press plates

ALLOY WHEEL DEEP IMPACT SOCKETSKT4405MX

3pce 1/2" drive wheel nut impact socket set.

6PC 1/2" DR WHEEL NUT SOCKET SETKT4406MX

6pce 1/2" drive wheel nut impact socket & torque extension set. Material chrome molybdenum alloy

steel finishing - phosphate sunk.

TOOL CHEST 63PCGCAZ0039

Concertina tool box 470 x 220 x 350mm. 1/2” drive socket set 10-32mm. Complete with screwdrivers, pliers, wrenches, hex keys, hammers. The perfect portable tool kit.

COMBINATION SOCKET SETS

$39913$459.00 GST Incl.

+GST

$43134$496.04 GST Incl.

+GST

$13283$152.76 GST Incl.

+GST$20878$240.10 GST Incl.

+GST

$4462$51.31 GST Incl.

+GST$10954$125.97 GST Incl.

+GST

$49900$573.85 GST Incl.

+GST

Code Description +GST InclusiveKT2530CR01 1/4" dr Combination Socket Set - 30pc $99.00 $113.85KT3036CR01 3/8" Dr Combination Socket Set - 36pc $169.00 $194.35KT4042CR06 1/2"dr Combination Socket Set - 42pc $315.00 $362.25

1/4 - 1/2" PLASTIC SET - 110PCKT7510MRC

1/4" std & deep skts 5-14mm 1.4" torx skts E4-E8, 1/2" std & deep skts 8-30mm, Hex Keys 1.5-10mm, R/OE Wrenches 8-19mm, Hex Keys H1.5-H10 Bits - phillips, slot, torx, hex, pozi, spline. Many more accessories - See in store.

1/4 - 1/2" PLASTIC SET - 87PCKT7587MRC01

1/4" std skts 5-13mm, 1/4" deep skts 7-13mm, 1/2" std skts 10-32mm, R/OE

Wrenches 6-22mm, Spark Plug skts. Many more accessories -

See in storeHEX SOCKETS ON RAIL 3/8” DR

KT3108PR8 8pc Hex. Metric 3-12mm.

Torx Set shown

KT3109PR8 9pc Torx. T10 - T50.

POWER BARSPlain handle grip. Extra torque for those stubborn nuts & bolts.

Code Description +GST InclusiveCFBC1215 Power Bar, 3/8" Drive x 15" Long $43.00 $49.45CFBC1624 Power Bar 1/2" Drive x 24" Long $65.50 $75.33CFBC1630 Power Bar 1/2" Drive x 30" Long $71.50 $82.23CFBC2440 Power Bar 3/4" Drive x 40" Long $169.00 $194.35CFBC3240 Power Bar 1" Drive x 40" Long $179.00 $205.85

SOCKET & SPANNER SET 1/4 & 1/2" DR 94PCS87+7

With socketry and popular spanners. A truly great set.

TOOL KIT 186PCGCBZ186A

Includes 9 drawer top chest. Designed for the NZ market. Ideal tool set for engineers & mechanics. AF & Metric 1/4, 3/8, 1/2” Dr. Socket Sets. Sizes: 4 - 32mm, 5/32” - 1.1/4”. R&OE Spanners AF & Metric 6 - 24mm, 1/4” - 1”, and much, much more!!!

$1,41000$1,621.50 GST Incl.

+GST

$35075$403.36 GST Incl.

+GST$3433


EACH

BONUSGAAI5401

SOCKET & BIT SET

17

9PC PIN PUNCH SET 2-14KT1009GPN

9 PC. Sheathed Pin Punch Set, - Material – chrome molybdenum

alloy steel - Finishing - phosphate sunk - Safe and comfortable grip

$14000$161.00 GST Incl.

+GST

ADJUSTABLE WRENCH 200MM9031

Extra wide opening jaws to 38mm. Measurement scale on the head.

$3731$42.91 GST Incl.

+GST$4627


WIDE JAW ADJUSTABLE WRENCH THIN JAW 200MM

9031-T

45% thinner jaws, compared to a standard adjustable

wrench of equivalent size. Code Description +GST Inclusive9070P 6" Combination Adjustable Wrench $31.34 $36.049071P 8" Combination Adjustable Wrench $35.82 $41.199072P 10" Combination Adjustable Wrench $40.30 $46.349073P 12" Combination Adjustable Wrench $47.77 $54.93

Inclusive

COMBINATION ADJUSTABLE WRENCHESReversible adjustable wrench, phosphated, thermoplastic handle. Can be used as a standard adjustable wrench or as a pipe wrench. Made in Spain.

$19254$221.42 GST Incl.

$34500$396.75 GST Incl.

$10000$115.00 GST Incl.

$4804$55.25 GST Incl.

ROE SPANNER SET METRIC 26PC

KT1226MRN

Sizes 6 - 32mm.

RING & OPEN END SPANNER SET 14PC 10-32MMKT1214MR Metric Sizes: 10 - 32mm

4PC NUT SPLITTER SET 9-27MMKT9TD064

• For removing stubborn nuts and over-tightened bolts without damage to the bolt thread

• Suitable for nuts to a tensile class 6• Sizes: 9-12mm (5/16"-1/2"), 12-16mm (1/2"-5/8"),

16-22mm (5/8"-7/8"), 22-27mm (7/8"-1.1/8")

TUBE BENDER301036

Multi-head tube bender to suit 4mm, 6mm, 8mm and 10mm pipe. Durable metal construction for superior toughness and longevity. Simple yet effective operation with built in gauge to ensure accurate bending from 0-180° of movement. Bends copper, brass, aluminium and mild steel tubing. Knurled handles for maximum grip and comfort.

METRIC JUMBO R&OE SPANNER SETS

PIN PUNCH SET 6PCKT1006PR

Contains: #2 x 30, #3 x 40, #4 x 50, #5 x 50, #6 x 50, #8 x 50mm.

$3900$44.85 GST Incl.

+GST

SPEED WRENCH SET 12PC 8 - 24MMKT12112MRN

8 - 24mm. For fine movement of fasteners with 5˚ gear action (72 teeth).

$26900$309.35 GST Incl.

+GST

SCISSORS 250MM10610BU

Tailor’s scissors forged steel nickel plated with black handle. Blade length: 100mm. Overall length: 250mm.

$2388$27.46 GST Incl.

+GST

TRADE SHEARS 200MM1068BU

Tailor’s scissors forged steel nickel plated with black handle. Blade length: 90mm.Overall length: 200mm.

$1152$13.25 GST Incl.

+GST

SLIDE HAMMER SET269000

Includes two 100mm internal triple leg pullers and one 100mm external triple leg puller. Slide hammer capacity 1.1kg. Features tapered cone adaptors to support legs when adjusting pullers in position for easy operation.

$33.40 GST Incl.

$249 77 $287.23 GST Incl.

BONUS36PC 3/8"DR SOCKET SET

BONUSKT1211MRN 11PC R/OE WRENCH SET

$18252$209.90 GST Incl.

LARGE PIN PUNCH SET 5 PCE425154

• Set of five parallel pin punches XXL in foam tray with quality case.

• Heat treated for the perfect balance of hardness, strength and durability.

• With hand guard. • Made in Germany

Code Description +GST InclusiveWAS3120 6pc - 27, 28, 30, 36, 38mm $77.39 $89.00WAS3121 7pc - 50, 51, 54, 55, 57, 60, 63mm $294.78 $339.00WAS3122 8pc - 40, 41, 42, 43, 44, 45, 46, 47mm $155.65 $179.00

18

MULTI PURPOSE SHARPENERJS950M

Will sharpen drill bits up to 13mm.Also great for sharpening knives & scissors.

$9800$112.70 GST Incl.

+GST

UTE DECK MATTINGUTE18125

Multipurpose versatile mat with a textured non-slip surface, Heavy Duty Rubber Construction, Ideal for utes, vans, boats, factories, workbenches. 1250 x 50mm.

$10242$117.78 GST Incl.

+GST

180PC EZI-PAK GRAB KIT ASSORTMENT WD 9/12MM W3WD912GK180W3

Kit Contents:Band Width (mm) | Capacity (min-max) - Ø | QuantityWD9 | 8-12 | 20WD9 | 8-16 | 20WD9 | 12-20 | 20

WD12 | 16-27 | 20WD12 | 20-32 | 20WD12 | 25-40 | 20

WD12 | 30-45 | 20WD12 | 32-50 | 20WD12 | 40-60 | 20

$30700$353.05 GST Incl.

+GST

180PC EZI-PAK GRAB KIT ASSORTMENT WD 9/12MM W3

WD12 | 30-45 | 20WD12 | 32-50 | 20WD12 | 40-60 | 20

$39043$449.00 GST Incl.

2T LIGHTWEIGHT ALUMINIUM TROLLEY JACKBH1AOZ2000A

Double piston pump.2 Tonne certified to AUS/NZ standard.

LINISHALL ATTACHMENT036P

915mm X 50mm Belt.

$29800$342.70 GST Incl.

+GST

$14269$164.09 GST Incl.

$10209$117.40 GST Incl.

RECHARGEABLE 120 SMD LED UNDER BONNET WORKLIGHT 670 LUMENSLIGL-T24068

With 120 SMD super bright LEDs, professional series under-bonnet worklight provides intense light for any work area. Rechargeable, with several mounting options.

LEDLENSER IW5R WORK LIGHTLED502004

The durable iW5R work light is a reliable tool when things get tight. This compact light can be attached to any corner via magnetic base or hook, and floods your work space with light for up to six hours. The spotlight option at the top of the light provides a more focused beam of 300 lumens when you need it. Rechargeable. Floodlight + Spotlight. Floodlight has two brightness settings. Flexible attachment via magnetic base or hook. Energy Status Indicator. Tilt mechanism. 7 year warranty.

BONUSLIGL-T24100

RECHARGEABLE 300 LUMENS FLASHLIGHT

WORKSHOP BENCHMOUNT DRILL PRESS 20MMDBW20

$621.00 GST Incl.

$54000

Square tables for larger work area, with T slots for solid clamping. Column and Quill precision machined from thick wall tube for rigidity. Quick action, positive motor adjustment for belt tensioning. Safety Guard with flip up cover over chuck as standard. Solid one piece cast iron operating handles. Rack and pinion table height adjustment. Heavy-duty precision depth stops. Emergency stop switches. Tables tilt and rotate. Includes Drill Chuck and Arbor, Chuck Key and Drill Drift.

RUBBER SHEETINGDurable commercial grade rubber sheeting, Provides a non-skid surface, Designed to protect floors , workbenches. Ideal for workbenches, tool boxes etc.

To be purchased in 2 mtr lengths

Code Description +GST InclusiveRSFR90W Proflex Rubber Sheeting Fine Rib - 900mm wide per metre $17.70 $20.36RSFR120W Proflex Rubber Sheeting Fine Rib - 1200mm wide per metre $26.28 $30.22RSFR150W Proflex Rubber Sheeting Fine Rib - 1500mm wide per metre $31.28 $35.97RSBR120W Proflex Rubber Sheeting Broad Rib - 1200mm wide per metre $31.42 $36.13RSBR150W Proflex Rubber Sheeting Broad Rib - 1500mm wide per metre $58.28 $67.02RSCH120W Proflex Rubber Sheeting Checker - 1200mm wide $31.42 $36.13RSRS120W Proflex Rubber Sheeting Round Stud - 1200mm wide per metre $31.42 $36.13

8500W GENERATORPBG10000

8500Watts (10.6KVA) Max Maximum power for welding or multiple power tools on site and on the farm. 32amp to 15amp adapter cable incl.

$1,64783$1,895.00 GST Incl.

7000W GENERATORPBG7000

7000 Watts (8.75KVA) MaxExtra heavy-duty frame with

folding handle makes this unit ideal for the worksite, farm or

backup.

$1,21304$1,395.00 GST Incl.

MANUAL ROUND TUBE BENDER064

Supplied with a set of 5 formers & follow roller to suit round tube (1/2” – 1” dia).

$60783$699.00 GST Incl.

+GST

19

Automatic Shut off. Fuel leakage protection. Photocell, bi metal overheat sensor, fuse. Fan forced for superior heat distribution. Stainless steel combustion chamber. High efficiency combustion chamber. Runtime fuel gauge. Automatic spark ignition. Built in thermostat. CE/UL/CUL/CSA/SAA approved.

HONDA POWERED WATER BLASTERBAR2565C-H

2700 PSI @ 11.3 Litres per Minute, 6.5HP GX200, Comet BWD-K3027G Plunger Pump, Built In Unloader Valve, 9.2m of hose, 4 Quick nozzles, gun & lance

$1,49900$1,723.85 GST Incl.

+GST

BONUSBAR1400 Surface

Cleaner Value $153 + GST

WATERBLASTERBAR3160A-H

2800PSI, Honda 6Hp Engine, 8.7l/min, 7.5m Wire Braided Hose, 4 x Quick Connect Nozzles, Annovi Pump.

$86800$998.20 GST Incl.

+GST

BONUSHandy Bag, Vehicle

Cleaning Kit Foldable Funnel, Great Bungee

1.2m, Hour Meter, Foam Detergent Tip Cleaner

HONDA PRESSURE WASHER 4200PSIBAR4213J-H

15L/min, 13Hp Recoil Start, CAT Plunger pump with Brass head, 15m hose Gun Lance and 4 x Q/C Noz included.

$2,37915$2,736.02 GST Incl.

+GST

BONUSCOM E2420 Electric Air Compressor Value

$219 + GST

10KVA STANDBY GENERATORG10000-SELT

16Hp Electric Start Powerease Motor, 8000W Max (7500W Cont.), <5% THD Copper Alternator, Trade Panel with RCD, 2 x IP66 Waterproof sockets.

$1,99900$2,298.85 GST Incl.

+GST

BONUSCOM I-ARC 170-GEN Inverter Welder Value

$439 + GST

INVERTER GENERATORG3500I-R

4 Stroke, Air Cooled 212cc Petrol Engine, Recoil Start, 8.5Ltr Fuel Tank, 5 Hours Running at 100% Full Load, Easy 4 Wheel Frame With Lifting Handles, 37kg.

$1,79900$2,068.85 GST Incl.

+GST

TRADE-PRO GENERATORG8000-HST

8.0kVA, Honda Engine, 13Hp, Recoil Start, Max AC Output: 6400W, RCD and IP66 Outlets, Wheels & Handles For Easy Lifting.

$2,39043$2,749.00 GST Incl.

+GSTBONUS20Mtr Extension Cord

BONUSCOM I-ARC 150-GEN Inverter Welder Value

$363 + GST

$79333$912.33 GST Incl.

+GST

30KW JETFIRE DIESEL DIRECT FIRED HEATERDC 30

LED Readout. 1.47L/Hr, 30Kw, 125,000 Btu/Hr, Tank Capacity 38L. Effective heating area 232M², Burning Time 12 Hr.

$92666$1,065.66 GST Incl.

+GST

50KW JETFIRE DIESEL DIRECT FIRED HEATERDC50

4.27L/Hr, 50Kw, 210,000 Btu/Hr, Tank Capacity 49L. Effective heating area 430M², Burning Time 9 Hr.

$79333$912.33 GST Incl.

+GST

Automatic Shut off. Built-in safety device on ignition/overheat. Photocell. bi-metal overheat sensor, fuse. Built-in fan for better heat distribution. Efficient, compact and portable heating for large spaces. High efficiency combustion. Runtime fuel gauge. Automatic spark ignition. Cooling down fan system upon shut-off. Built in thermostat. Plastic fuel tank. LED readout. Quiet operation (less than 65db). CE/UL/CUL/CSA/SGS approved.

$59330$682.33 GST Incl.

+GST

17KW JETFIRE DIESEL DIRECT FIRED HEATERDC171.37L/Hr, 17Kw, 70,000 Btu/Hr, Tank Capacity 19L. Effective heating area 130M², Burning Time 11 Hr.

16KW JETFIRE DIESEL RADIANT HEATERDI16

1.37L/Hr, 16.5Kw, 60,000 Btu/Hr, Tank Capacity 12L, Effective heating area 132M², Burning Time 6.2 Hr.

Your local TradeZone Store

www.tradezone.co.nz

We are a fair-minded company and try to exceed the requirements of the ‘Fair Trading’ legislation. Prices are current for the period denoted on the cover. Stocks are not always available in all stores all the time but we will try our best to obtain more or equivalent substitutes. Errors and omissions are rare but can happen, so we apologise and try to take all reasonable measures to �x the issue for you.20

If you’re unable to get to us, please phone, fax or email us and we’ll deliver it directly to you.

ALL NEW SEASON 6

5 :00PM

ON PRIMESATURDAYS

avail able now! · 2019. 6. 3. · 3 • single stage ram with high quality, glide action pressure...

Documents