aviq company introduction
DESCRIPTION
aviq design - concept, analyse, designTRANSCRIPT
Aviq Design
Aviq Design Sdn BhdCompany Profile
Aviq Design
VISION & MISSION
VisionThe Centre of Excellence for Engineering Services.
Mission. To be competitive in engineering through the development
of people,capabilities and product
Aviq Design
•Aviq Design Sdn Bhd formed in 2004
•Comprise of experienced and capable aerospace engineers
•Experience encompassed entire Malaysian aerospace industries design and development efforts
Company Brief
Aviq Design
•System concept design
•Structural, mechanical and Electrical detail CAD design
•Structural analysis utilising CAE
•Electrical load analysis and Safety Engineering analysis
•Weight and Balance calculation (Weight engineering)
•Prototype development and testing
•Technical Manual publications
•Wire harness fabrication and installation on aircraft
•Development project management
Services Offered
Aviq Design
CAD/CAM/CAE CAPABILITY
•CATIA V5R14
•CATIA 4.2.2
•Pro Engineer
•MSC Nastran/Patran
•MathCAD
•Laminate Analysis Programme (LAP)
•SolidWorks
Aviq Design
ENGINEERING
DESIGNDESIGN
STRUCTURAL & MECHANICAL DESIGN
Conceptual Design
Complete Design and Drafting
Complete Digital Mock-up
Aircraft structural life upgrade
Prototyping & testing validation
Aviq Design
ENGINEERING - CONTINUE
STRUCTURE ANALYSISSTRUCTURE ANALYSIS
ENGINEERING ANALYSIS
Static strength analysis
Fatigue and damage tolerance
Structural dynamic analysis
Finite element analysis
Detailed weights engineering
Endurance cycle
Structural test analysis (including bird strike testing).
Aviq Design
ENGINEERING - CONTINUE
STRUCTURE ANALYSISSTRUCTURE ANALYSIS
ENGINEERING ANALYSIS
Static strength analysis
Fatigue and damage tolerance
Structural dynamic analysis
Finite element analysis
Detailed weights engineering
Endurance cycle
Structural test analysis (including bird strike testing).
Aviq Design
Safety engineering/ Hazard analysis
• A separate safety engineering group to analyse pitfall and failure modes need to be part of development team
• Various model can be used. FMECA/ Fail-Tree Model etc.
• Findings may be incorporated in design of system
Aviq Design
System Concept Design
C-130 Outer Wing Turnover Fixture
A fixture that clamp and allow C-130 outer wing to be turned over upside down. This is to allow both top and bottom wing skin be removed and replaced
b)Mi-17 Aerial Fire Fighting System
A system that is able to deliver water sideway and downward to fight high rise fire and open wild fire.
c)Tactical Unmanned Aerial Vehicle
An unmanned aerial vehicle for tactical surveillance over a battlefield.
d)Palletised Water Bag System
A system to drop water bags from aircraft using existing air drop method to fight forest fire.
e)Flight Termination Device
An electronic device to actuated flight termination sequences for UAV flight testing
Aviq Design
System Detail Design
a)BAE System Nimrod MRA4 design
Design of sonobouy racks and other cabin structures.
b)Airbus A380 Design
Design of underwing leading edge panels.
c)Airbus A400 Design
Design of Vertical tail leading edges and wing leading edges
Aviq Design
BAE SYSTEMS NIMROD’S MRA4 MARITIME PATROL AIRCRAFT FOR RAF UK
Airstairs
Ordnance
Workstation
Sonobuoy Rack
APU Battery Box
Floor Panel
Accident Data Recorder
Flight Control
Aviq Design
BAE SYSTEMS NIMROD MRA4 - AIRSTAIRS
• Complete turnkey project from design to
qualification testing and production
• A manually deployable Airstair that takes
3 minutes or less to deploy completely.
Aviq Design
BAE SYSTEMS NIMROD MRA4 – SONOBUOY RACK
• Design engineering task and manufacturing,
including 3rd and 99th percentile human
engineering test (mockup test).
• An interchangeable design that has to
withstand all crash loads with full complement
of the sonobuoys.
• Flexible design around available facilities in
country
• Complex welding and heat treatment
process.
• Test on prototype for post-welding NDT and
Destructive tests.
Aviq Design
AIRBUS A380 (PAX & FREIGHTER) FLELP
•Fixed Leading Edge Lower Panels (FLELP).
•Package covers from conceptual design to final certification for full set of panels.
•The Design package consists mainly of 31 composite panels and 2 metallic panels per wing side.
Aviq Design
A400M – GKNAES (UK) & EADS/CASA (SPAIN)
• Contract with GKNAES (UK) – A400M Fixed Trailing Edge. This package consists of 32 composite panels per wing side. It also includes all supporting metallic parts that hold the panel to interface components such as buttstraps, seals and brackets.
• Contract with EADS/CASA - To design the components of the A400M Horizontal Stabilizer Trailing Edge Panels, Vertical Tail Plane Leading Edge (VTPLE) panels and VTPLE – bird strike test plan.
Aviq Design
A400M – GKNAES (UK) & EADS/CASA (SPAIN)
Vertical Tail Plane Leading Edge Panels
Wing Trailing EdgePanels (M1F03)
Horizontal Tail PlaneTrailing Edge Panels & Actuator Fitting
Aviq Design
TRACK RECORD SUMMARY
DESIGN
• Nimrod’s floor panels
• Nimrod’s APU
• Nimrod’s ordnance workstation
• Nimrod’s accident data recorder installation.
• Nimrod’s flying control pulley bracket
• Nimrod’s floor mod kit & restraints
•A400M Wing Trailing Edge panels, HTPTE panels & Actuator fittings and VTPTLE panels.
• A380’s fixed leading edge lower panels.
Aviq Design
TRACK RECORD SUMMARY -CONTINUE
DRAFTING• Nimrod’s mid structures
• Nimrod’s elevator structures change
• Nimrod’s pitot Static Installation
• Nimrod’s port A/C Crate
• Nimrod’s wind screen
• Bombardier’s CRJ 700
• Package from Clairis Technologies.
DESIGN & BUILD
• Nimrod’s Airstair.
• Nimrod’s Sonobouy Rack
Aviq Design
Structural Analysis
BAE System Nimrod MRA4 design
Structural analysis, Hand Calculations and PATRAN?NASTRAN, for design of sonobouy racks, airstairs and other cabin structures.
b)Airbus A380 Design
Structural analysis, MathCAD and PATRAN/NASTRAN for design of underwing leading edge panels.
c)Airbus A400 Design
Structural analysis, MATHCAD and PATRAN/ NASTRAN for design of Vertical tail leading edges and wing leading edges
Aviq Design
Electrical Design and Analysis
We have the system and experienced personnel to develop Electrical Design and analysis for the aircraft and UAV systems The analysis consist of electrical load analysis and system safety engineering. Our personnel have experience in providing electrical. design and analysis for the followings;
a)S-61 helicopter avionic upgrade
Avionic upgrade with introduction of new systems (Navigations, Communications etc).
b)Eagle ARV System
Converting a GA aircraft, Eagle 150 B into unmanned aircraft.
c)UAV electrical system
Power management and system design for UAV
Aviq Design
100110010101000111100011100011100101101011110000011110000110
Company Structure
Aviq Design Project Done By Aviq Design
a)S-61 helicopter Doppler Navigation System Integration
New Doppler Nav system which interface with flight Information Display is integrated and installed on RMAF S-61A-4 helicopter. We provide the design analysis, wire harness fabrication, installation and testing activities for the project.
b)M-55 Antenna Mounting Design
A Russian High altitude aircraft (M-55) is to be used to provide Broadband signal over an area. We provide the concept deign for antenna mounting that can hold up to 200 kg of antenna weight but installed internally inside the aircraft.
Aviq Design
Thank You
We look forward to our future business We look forward to our future business partnershippartnership
For enquiries, contact:
Mohd Jamil ZulkifliDirectorAviq Design Sdn BhdD2-12-2, Block D2Pusat Perdagangan Dana 1Jalan PJU 1A/4647301 PJ Malaysia
E-mail: [email protected]