awwa standards 1996
DESCRIPTION
List of AWWA Standards 1996TRANSCRIPT
' ....
)
Insert this index at the beginning of each AWWA Standard• binder:
AWWA Standards-January, 1996 This list includes American Water Works Association Standards in ~ffect on Jan. 1, 1998, or withdrawn since
See the January 1996 and subsequent issues of Journal AWWA for official notice of any changes in the. status of e.zis new standards. An asterisk indicates American National Standarda Institute (ANSI) approval. A standard listed wi and a year in parenthesis indicates that the standard has been reaffirmed with no change.
S!t1nd.ird rJurnbcr AWWA Standard for
' ,_- ~ ... SOURCE~~~~~~~~~~~~~~~~~-,-~~~~~
Al00-90' AWWA Standard for Water Wells
Filtration Bl00-89' AWWA Standard.for Filtering Material (Includes addenda BlOOa-91 and B100.b-92J BlOl-94' AWWA Standard for Precoat Filter Media .
Softening B200-93' AWWA Standard for Sodium Chloride B201-92' AWWA Standard for Soda Ash B202-93' AWWA Standard for Quicklime and Hydrated Lime
Disinfection Chemicals B300-92' AWWA Standard for Hypochlorites B301-92' AWWA Standard for Liquid Chlorine B302-90' AWWA Standard for Ammonium Sulfate B303-88' AWWA Standard for Sodium Chlorite
Coagulation 8402-95* AWWA Standard for Ferrous Sulfate 8403-93* AWWA Standard for Aluminum Sulfate-Liquid, Ground, or Lump 8404-92* AWWA Standard for Liquid Sodium Silicate
_. .. ,.- 8405-94* AWWA Standard for Sodium Aluminate . .; B406-92' AWWA Standard for Ferric Suifate
B407-93' AWWA Standard for Liquid Ferric Chloride B408-93* AWWA Standard for Liquid Polyaluminum Chloride 8451-92* AWWA Standard for Poly(Diallyldimethylammonium Chloride) B452-90' AWWA Standard for EPl-DMA Polyamines
Scale and Corrosion Control B501-93* AWWA Standard for Sodium Hydroxide (Caustic Soda) B502-94* AWWA Standard 'ror Sodium Polyphosphate,- Glassy (Sodium Hexametaphosphate) B503-94' AWWA Standard for Sodium Tripolyphosphate 8504-94* AWWA Standard for Monosodium Phosphate, Anhydrous 8505-95* AWWA Standard for Disodium Phosphate, Anhydrous B510-95* AWWA Standard for Carbon Dioxide 8511-90* AWWA Standard for Potassium Hydroxide B512-91 * AWWA Standard for Sulfur Dioxide B550-90' AWWA Standard for Calcium Chloride
Taste-and-Odor Control B600-90 AWWA Standard for Powdered Activated Carbon 8601-93* AWWA Standard for Sodium Metabisulfite B602-91' AWWA Standard for Copper Sulfate B603-93* AWWA Standard for Potassium Permanganate B604-90 AWWA Standard for Granular Activated Carbon
au.ting continued)
Standard Number AWWA Standard for
Prophylaxis B701-94* AWWA Standard for Sodium Fluoride B702-94* AWWA Standard for Sodium Fluorosilicate B703-94* AWWA Standard for Fluorosilicic Acid
PIPE 8.. ACCESSORIES-------------------Ductile-Iron Pipe and Fittings
C104./A21.4-95* American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
CI05/A21.5-93* American National Standard for Polyethylene Encasement for Ductile-Iron Pipe Systems ·
Cl!O/A21.10-93* American National Standard for Ductile-Iron and Gray-Iron Fittings, 3 In. Through 48 In. (75 mm Through 1200 mm), for Water and Other Liquids
Clll/A21.11-90• American National Standard for Rubber-Gasket Joint.s for Ductile-Iron Pressure Pipe and Fittings
· Cll5/A21.15-94* American National Standard for Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
C150/A21.50-91 * American National Standard for the Thickness Design of Ductile-Iron Pipe Cl51/A21.51-91 * American National Standard for Ductile-Iron Pipe, Centrifugally Cast, for
Water or Other Liquids Cl53/A21.53-94* American National Standard for Ductile-Iron Compact Fittings, 3 In.
Through 24 In. (76 mm Through 610 mm) and 54 In. Through 64 In. (1,400 mm Through 1,600 mm), for Water Service
Steel Pipe C200-91* AWWAStandard for Steel Water Pip~ In. (150 mm) and Larger C203-91 * AWWA Standard for Coal-Tar Protective Coatings and Linings for Steel Water
Pipelines-Enamel and Ta~Hot-Applied C204-75 AWWA Standard for Chlorinated Rubber-Alkyd Paint System for the Exterior
of Aboveground.Steel Water Piping, WITHDRAWN, 2/86 C205-89* AWWA Standard for Cement-Mortar Protective Lining and Coating for Steel Water
Pipe-4 In. and Larger-Shop Applied · C206-91 * AWWA Standard for Field Welding of Steel Water Pipe C207-94* AWWA Standard for Steel Pipe Flanges for Waterworks Service-Sizes 4 In.
Through 144 In. (100 mm Through 3,600 mm) C208-83(R89)* AWWA Standard for Dimensions for Fabricated Steel Water Pipe Fittings C209-90* AWWA Standard for Cold-Applied Tape Coatings for the Exterior of Special
~ections, Connections, and Fittings for Steel Water Pipelines " C210-92* AWWA Standard for Liquid-Epoxy Coating Systems for the Interior and Exterior
of Steel Water Pipelines C213-91* AWWA Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of
Steel Water Pipelines · C214-89* AWWA Standard for Tape Coating Systems for the Exterior of Steel Water
Pipelines {Includes addendum C214a-91.) · C215-94' AWWA Standard for Extruded Polyolefin Coatings for the Exterior of Steel Water
Pipelines C216-94* AWWA Standard for Heat-Shrinkable Cross-Linked Polyolefin Coatings for the
Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines C217-90* AWWA Standard for Cold-Applied Petrolatum Tape and Petroleum Wax Tape
Coatings for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines C218-91* AWWA Standard for Coating the Exterior of Aboveground Steel Water Pipelines and Fittings C219-91 * AWWA Standard for Bolted, Sleeve-Type Couplings for Plain-End Pipe C220-92* .AWWA Standard for Stainless-Steel Pipe, 4 In. (100 mm) and Larger
Concrete Pipe C300-89* AWWA Standard for Reinforced Concrete Pressure Pipe, Steel-Cylinder Type, for
Water and Oiher Liquids (Includes addendum C300a-93.) C301-92* AWYJA Standard for Prestressed Concrete Pressure Pipe, Steel-Cylinder Type, for
Water and Other Liquids · .·'~ C302-95* AWWA Standard for Reinforced Concrete PresSure Pipe, Noncyliiider Type C303-95* AWWA Standard for Concrete Pressure Pipe, Bar-Wrapped, Steel·Cylinder Type C304-92* AWWA Standard for Design of Prestressed Concrete Cylinder Pipe
aistina continued)
SL1ndJrd Nurnber AWWA St.1nd.Jrd for
Asbestos-Cement Pipe C400·93* AWWA standard for Asbesto&-Cement Preesure Pipe, 4 In. Through
16 In. (100 mm Through 400 mm), for Water Distribution Systems C401·93• AWWA Standard for the Selection of Asbestos-Cement Preesure
Pipe, 4 In. Through 16 In. (100 mm Through 400 mm), for Water Distribution Systems C402.S9• AWWA Standard for Asbestos-Cement Transmission Pipe, 18 In. Through 42 In.
(450 mm Through 1050 mm), for Potsble Water and Other Liquids C403.SS• AWWA Standard for the Selection of Asbesto&-Cement Transmission and
Feeder Main Pipe, Sizes 18 In. Through 42 In. (450 mm Through 1050 mm)
Valves and Hydrants • C500·93* AWWA Standard for Metal-Bested Gate Valves for Water Supply Service (Includes addendum C500a-95.) C501·92* AWWA Standard for Cast.Iron Sluice Gates C502·94• AWWA Standard for Dry-Barrel Fire Hydrants (Includes addendum C502a-95.) C503·86• AWWA Standard for Wet-Barrel Fire Hydrants C504·94• AWWA Standard for Rubber-Bested Butterfly Valves C506·78(R83)• AWWA Standard for Backflow Prevention Devices-Reduced Pressure
Principle and Double Check Valve Types, WITHDRAWN, 9/90 C507·91 * AWWA Standard for Ball Valves 6 In. Through 48 In. (150 mm Through 1200 mm) C508·93* AWWA Standard for Swing-Check Valves for Waterworks Service, 2 In. (50 mm) Through
24 In. (600 mm) NPS (Includes addendum C508a-93.) C509·94• AWWA Standard for Resilient-Bested Gate Valves for Water Supply
Service (Includes addendum C509a·95.) C510·92• AWWA Standard for Double Check Valve Backflow-Prevention Assembly C511·92* AWWA Standard for Reduced-Pressure Principle Backflow-Prevention Assembly C512-92* AWWA Standard for .Air-Release, AirNacuum, and Combination Air Valves for Waterworks Service C540·93• AWWA Standard for Power-Actuating Devices for Valves and Sluice Gates C550-90* AWWA Standard for Protective Epoxy Interior Coatings. for Valves and Hydrants
) PIPE INSTALLATION
)
C600-93* AWWA St.andard for Installation of Ductile-Iron Water Mains and Their Appurtenances
C602-89* AWWA Standard for Cement-Mortar Lining of Water Pipelines-4 In. (100 mm) and Larger-In ~lace
C603-90 AWWA Standard for Installation of Asbestos-Cement Pressure Pipe C605·94• AWWA Standard for Underground Installation of Polyvinyl Chloride (PVC) Pressure .. Pipe and Fittings for Water C606-87' AWWA Standard for Grooved and Shouldered Joints
DISINFECTION OF FACILITIES---------------~ C651-92* AWWA Standard for Disinfecting Water Mains C652-92* AWWA Standard for Disinfection of Water-Storage FacilitieS C653-87"' AWWA Standard for Disinfection of Water Treatment Plants C654-87' AWWA Standard for Disinfection of Wells
METERS~-~----~-------~----~--~ C700-90"' AWWA Standard for Cold-Water Meters-Displacement Type, Bronze Main
Case (Includes addendum C700a-9!.) C701-88* AWWA Standard for Cold-Water Meters-Turbine Type, for Customer Service C702-92' AWWA Standard for Cold-Water Meters-Compound Type C703·86' AWWA Standard for Cold-Water Meters-Fire-Service Type C704-92 AWWAStandard for Propeller-Type Meters for Waterworks Applications C706-91"' AWWA Standard for Direct-Reading, Remote-Registration Systems for Cold-Water
Meters (Includes addendum C706a-92.) C707-82(R92)' AWWA Standard for Encoder-Type Remote-Registration Systems for Cold-Water
Meters C708-91' AWWA Standard for Cold-Water Meters-Multijet Type C710-90* AWWA Standard for Cold-Water Meters-Displacement Type, Plastic Main
Case (Includes addendum C710a-91.)
(listillll continued)
·----------
St;:indZlrd Number AWWA Standard for
SERVICE LINES---~-----------------CS00-89* AWWA Standard for Underground Service Line Valves and Fittings
PLASTIC PIPE·----------------------C900·89* AWWA Standard for Polyvinyl Chloride (PVC) Pressure Pipe, 4 In. Through 12 In.,
for Water Distribution (Includes addendum C900a-92.) C901·88* AWWA Standard for Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. Through
3 In., for Water Service C902-88* AWWA Standard for Polybutylene (PB) Pressure Pipe and Tubing, ~ In. Through
3 In., for Water C905-88• AWWA Standard. for Polyvinyl Chloride (PVC) Water Transmission Pipe, Nominal
Diameters 14 In. Through 36 In. C906·90' AWWA Standard for Polyethylene (PE) Pressure Pipe and Fittings, 4 In. Through 63 In.,
for Water Distribution C907·91' AWWA Standard for Polyvinyl Chloride (PVC) Pressure Fittings for Water--4 In. Through 8 In.
(100 mm Through 200 mm) · C950-88' AWWA Standard for Fiberglass Pressure Pipe
STORAGE _______________________ _
DI0()..84* AWWA Standard for Welded Steel Tanks for Water Storage (Includes addendum DIOOa·89.)
Dl01·53(R86)' AWWA Standard for Inspecting and Repairing Steel Water Tanks, Standpipes, Reservoirs, and Elevated Tanks, for Water Storage
0102-78 AWWA Standard for Painting Steel Water.Storage Tanks, WITHDRAWN, 6/91 0103·87' AWWA Standard for Factory.Coated Bolted Steel Tanks for Water Storage 0104-91* AWWA Standard for Automatically Controlled, Impressed-Current Cathodic Protection
for the Interior of Steel Water Tanks Dll0-86* AWWA Standard for Wire-Wound Circular Prestressed-Concrete Water Tanks D120-84(R89)* AWWA Standard for Thermosetting Fiberglass-Reinforced Plastic Tanks 0130-87* AWWA Standard for Flexible-Membrane-Lining and Floating-Cover Materials for
Potable-Water Storage
PUMPING
ElOl-88* AWWA Standard for Vertical Turbine Pumps-Line Shaft and Submersible Types
PLANT EQUIPMENT-------------------FlOl-91* AWWAStandard for Contact-Molded, Fiberglass-Reinforced Plastic Wash Water
Troughs and Launders F102-91 * AWWA Standard for Matched-Die-Molded, Fiberglass-Reinforeed Plastic Weir Plates,
Scum Baffles, and Mounting Brackets