icmsmticmsmt.com/wp-content/uploads/2019/03/proceedings-of-icmsmt-volume-2.pdf · b c pillai...
TRANSCRIPT
ICMSMT – Volume 2
12 – 13, April 2019, Coimbatore, Tamil Nadu, India
Proceedings of the First International Conference on Materials Science and Manufacturing
Technology 2019 (ICMSMT 2019) - Volume – 2
S.No. Paper ID Title of the Paper Name of the Authors Affiliation
1. MS 3009 Implant materials for knee and hip joint replacement: A review from the tribological perspective.
Omar Hussain,
Shahid Saleem
Babar Ahmad.
National Institute of Technology Srinagar, Kashmir, 190006, India
2. MS 3013 Enhancement of Micro cantilever’s Rectangular and Triangular Beam for Improvising the Sensitivity of Biosensor – a Comparative Study
S Urekabharathi
K G Padmasine
Bharathiar University, Coimbatore.
3. MS 3021 Performance of Catalyst Coated Membrane (CCM) at different operating conditions in Proton Exchange Membrane (PEM) fuel cell
Vrushali M. Umap
R. P. Ugwekar
Laxminarayan Institute of Technology, Nagpur, Maharashtra 440033, India,
4. MS 3025 Incremental effect of saccharum officinarum addition on strength characteristics of geopolymer composite specimens
A R Dar National Institute of Technology. Srinagar, J&K, India
5. MS 3027 Non-destructive evaluation of a steel plate subjected to mechanical damage
A R Dar National Institute of Technology. Srinagar, J&K, India
6. MS 3033 Synthesis and Characterization of bioactive composite coating on Titanium by PVD for biomedical application
Karthik Alagarsamy,
Vinita Vishwakarma,
Gobi Saravanan Kaliaraj
Sathyabama Institute of Science and Technology,
Chennai- 600119, India.
7. MS 3035 System Identification of Magnetorheological Damper for Various Configurations
Daniel C
Betsya G,
Sarala L,
Tensing D,
Hemalatha G,
Paul Sathiyan S
Karunya Institute of Technology and Sciences, Coimbatore
System Identification of Magnetorheological Damper for Various Configurations
Sundar Manoharan S Sathyabama Institute of Science and Technology, Chennai
8. MS 3037 Phonon limited mobility in 3D Dirac semimetal Cd3As2
Amarnath R,
Bhargavi K S *
Siddaganga Institute of Technology, B. H. Road, Tumkur-572103, Karnataka, India.
Phonon limited mobility in 3D Dirac semimetal Cd3As2
S S Kubakaddi, K. L. E. Technological University, Hubballi-580031, Karnataka, India.
9. MS 3038 Anomalous multiphonon features of hyper-Raman in ZnO NPs
Eliyash Ahmed,
Ranit Roy,
K Senthilkumar*
National Institute of Technology, Meghalaya, 793003
Anomalous multiphonon features of hyper-Raman in ZnO NPs
R Rajaraman Indira Gandhi Centre for Atomic Research, India,
603 102
ICMSMT – Volume 2
12 – 13, April 2019, Coimbatore, Tamil Nadu, India
S.No. Paper ID Title of the Paper Name of the Authors Affiliation
10. MS 3039 Effect of single spark micro-EDM on crater size of different alloys
R Nadda,
C K Nirala*
Indian Institute of Technology Ropar,
Punjab 140001, India
11. MS 3042 Simulation study and analysis of plant layout in tin container industry
Manohar V Pattar,
Vinayak N Kulkarni
V N Gaitonde
KLE Technological University, Hubballi-580031, Karnataka, India.
12. MS 3045 Experimental investigation on the critical heat flux of Cu-water, Al-water nanofluids for precise cooling of electronic systems
R Catherine Joy,
A Albert Rajan
A. Brusly Solomon,
B C Pillai
Karunya Institute of Technology and Sciences, Karunya Nagar.
Experimental investigation on the critical heat flux of Cu-water, Al-water nanofluids for precise cooling of electronic systems
K Ramachandran Bharathiar University, Coimbatore.
13. MS 3046 Open Hole Testing Methods for Different Materials: A Review
S Sirmour,
U Kumar,
H Chandrakar
N Gupta*
National Institute of Technology Raipur - 492010 (CG), India.
14. MS 3047 Mechanical and Tribological Behaviour of Al2O3&SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy
L. Natrayan, VIT University, Chennai, Tamilnadu
Mechanical and Tribological Behaviour of Al2O3&SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy
M.S. Santhosh, Selvam Composite Materials Research Laboratory, Namakkal, Tamilnadu
Mechanical and Tribological Behaviour of Al2O3&SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy
R. Mohanraj,
R. Hariharan
Selvam College of Technology, Namakkal, Tamilnadu.
15. MS 3054 Applications of Work Study Techniques for Improving Productivity at Assembly Workstation of Valve Manufacturing Industry
P R Akkoni,
Vinayak N Kulkarni
V N Gaitonde
KLE Technological University, Hubballi, Karnataka, India-580031
16. MS 3057 Design and fabrication of dental implant prototypes using additive manufacturing
Divya Prakash, Vaugh Institute of Agricultural Engineering and Technology, SHUATS, Prayagraj, 211007, India
Design and fabrication of dental implant prototypes using additive manufacturing
Rahul Davis National Institute of Technology- Patna (NIT-P), Ashok Rajpath, Patna, 800005, India
Design and fabrication of dental implant prototypes using additive manufacturing
Ashwani Kumar Sharma Hindustan Aeronautics Limited (HAL), Avionics Division, Amethi, 227412, India
ICMSMT – Volume 2
12 – 13, April 2019, Coimbatore, Tamil Nadu, India
S.No. Paper ID Title of the Paper Name of the Authors Affiliation
17. MS 3059 Comparing the Geometrical Accuracy of a 3D Printed Pattern to a Metal Pattern
C.T.Justus Panicker, National Institute of Technology, Trichy, Tamilnadu, India
Comparing the Geometrical Accuracy of a 3D Printed Pattern to a Metal Pattern
C.Veera ajay,
C.Boopathi,
R.Vivekanandan
Bannari Amman Institute of Technology, Sathyamangalam, Tamilnadu, India
18. MS 3066 Predicting the Wear Rate of Aluminum Alloy AA2024-T351 using Hybrid Linear function and Radial Basis Function
A Ashwin,
R B Hari Lakshman,
C B Chand Swaroop,
M Vignesh,
R Vaira Vignesh,
R Padmanaban
Amrita School of Engineering,
Coimbatore, Amrita Vishwa Vidyapeetham, India
19. MS 3069 A comparative numerical study of standard 3D composite plate using virtual crack closure technique and cohesive zone modelling method
B R Sindhu,
Kiran Kamath
Manipal Institute of Technology, Manipal-576104, India.
A comparative numerical study of standard 3D composite plate using virtual crack closure technique and cohesive zone modelling method
J Raju CSIR-National Aerospace Laboratories, Bangalore-560017, India.
20. MS 3075 Numerical investigation on solidification in casting using ProCAST
Shashank Dubey,
Smruti Rekha Swain
CMR Institute of Technology, Bangalore –560037, Karnataka, India
21. MS 3079 Analyzing structural and tribological characteristics of different materials at micro- and nano-level using molecular dynamics simulations: An overview
Qurat-Ul-Ain,
M.F.Wani,
Rakesh Sehgal
NIT Srinagar,
Hazratbal, Srinagar, Kashmir, 190006
22. MS 3080 On the multi-parametric optimization of quality characteristics of the hybrid Al-6061 composites fabricated through powder metallurgy
M P Joshi Chitkara University, Punjab, India
On the multi-parametric optimization of quality characteristics of the hybrid Al-6061 composites fabricated through powder metallurgy
J Singh,
C Prakash
S Singh
Lovely Professional University, Punjab, India
23. MS 3087 Assessment of machinability of super alloy inconel 718 using aluminium oxide and mixed oxide ceramic cutting tools
S I A Qadri,
G A Harmain
M F Wani
National Institute of Technology, Srinagar, Kashmir, India
24. MS 3088 Analysis of angular shrinkage of fused filament fabricated poly-lactic-acid prints and its relationship with other process parameters
K Sandhu, LPU, Phagwara, Punjab- 144411
Analysis of angular shrinkage of fused filament fabricated poly-lactic-acid prints and its relationship with other process parameters
S Singh,
C Prakash
LPU, Phagwara, Punjab- 144411
ICMSMT – Volume 2
12 – 13, April 2019, Coimbatore, Tamil Nadu, India
S.No. Paper ID Title of the Paper Name of the Authors Affiliation
25. MS 3089 Estimation of residual stress and deformation of laser deposited tracks of Ni-5Mo-5Al powder using thermo-mechanical finite element simulation
Ankit Shrivastava,
Vikash Kumar,
Sumanta Mukherjee,
Prakash Kumar
BIT Sindri, Sindri 828123, India
Estimation of residual stress and deformation of laser deposited tracks of Ni-5Mo-5Al powder using thermo-mechanical finite element simulation
Vivek Singh, IIT (ISM) Dhanbad, Dhanbad 826004, India
Estimation of residual stress and deformation of laser deposited tracks of Ni-5Mo-5Al powder using thermo-mechanical finite element simulation
Sitanshu Shekhar Chakraborty
CSIR-Central Mechanical Engineering Research Institute, Durgapur, 713209, India
26. MS 3090 Effect of ageing treatment on microstructure and mechanical properties of α+β type titanium alloy used for biomaterials
P K Mandal,
Manu Sam Mathews,
Benjamin A Daniel,
Jithin Devasia
Amal Jyothi College of Engineering, Kanjirappally-686518, Kerala, India
27. MS 3093 Analyzing the cost drivers and process optimization in additive manufacturing
R.M.Pushparaj,
S.Aravind Raj,
K.Jayakrishna,
R.Vezhavendhan
Vellore Institute of Technology, Vellore - 632014, Tamil Nadu, India
28. MS 4002 Effect of process parameters on geometrical aspects in direct metal laser deposition of Ni5Mo5Al hardface coating
Vikash Kumar,
Ankit Shrivastava,
Prakash Kumar
Sumanta Mukherjee
BIT Sindri, Sindri 828123, India
Debapriya Patra Karmakar,
Muvvala Gopinath,
IIT Kharagpur, Kharagpur 721302, India
Shitanshu Shekhar Chakraborty,
Himadri Roy,
CSIR - Central Mechanical Engineering Research Institute, Durgapur 713209, India
29. MS 4006 Bactericidal Activity of Zinc Oxide Nanoparticles
R. Mala,
N. Hari Prasath
A. S. Ruby Celsia
Mepco Schlenk Engineering College, Sivakasi-626005, Tamil Nadu, India.
30 MS 4007 Characterization and Analysis of Natural Fibre-Rice Husk with Wood Plastic Composites
V G Pratheep,
E B Priyanka,
P Hare Prasad
Kongu Engineering College, Tamil Nadu, India.
31. MS 4015 Strain dependent hysteresis in XNBR-CNT nanocomposites
N R Manoj,
P Jayesh,
T. Mukundan
Naval Physical and Oceanographic Laboratory (DRDO) Thrikkakkara, Kochi-686021, Kerala, India
Strain dependent hysteresis in XNBR-CNT nanocomposites
K. Sasikumar, Combat Vehicles Research & Development Establishment (DRDO), Avadi, Chennai-600054, India
ICMSMT – Volume 2
12 – 13, April 2019, Coimbatore, Tamil Nadu, India
S.No. Paper ID Title of the Paper Name of the Authors Affiliation
32. MS 4018 Experimental Study on Spring-in Deformation for L-shape CFRP Components
Tushar Gajjar Sardar Vallabhbhai National Institute of Technology, Surat – 395 007, India.
Experimental Study on Spring-in Deformation for L-shape CFRP Components
Dhaval Shah,
S J Joshi
K M Patel
Institute of Technology, Nirma University, Ahmedabad – 382 481, India
33. MS 4023 Effectiveness of corrosion resistance of strontium and barium coated rebars – a preliminary comparative study.
M Ananthkumar
K M Mini
Amrita School of Engineering, Coimbatore,
Amrita Vishwa Vidyapeetham, India.
34. MS 4024 Biomass derived functional carbon from Sargassum Wightii seaweed for supercapacitors
P.Divya,
A. Prithiba
R. Rajalakshmi
Avinashilingam Institute for Home Science and Higher Education for Women, Coimbatore-641043, India.
35. MS 4025 Symmetrised dot pattern technique for fault diagnosis in a spur gear assembly using vibration signals
Aneesh D Diwakar
P V Manivannan
Indian Institute of Technology Madras,
Chennai-600036, India
36. MS 4028 Dynamic analysis of fireworks industrial buildings underimpulsive loading
N.Chellakavitha
V.Siveetha
Mepco Schlenk Engineering College, Sivakasi, Virudhunagar District, India.
37. MS 4031 Adhesion Property of Self-lubricating Si/MoS2 Nanocoating at Nano-scale Level
Summera Banday,
M.F.Wani,
M.Junaid Mir,
Bisma Parveez
Nationàl Iňstitute of Tèchňology, Hazràtbal, Sriňagàr, J&K, India-190006
38. MS 4048 Nano-lubrication: Effect of nano-additives on the tribological properties of lubricants. A critical review
Sheikh Shahid Saleem* National Institute of Technology Srinagar, Kashmir, India
39. MS 4055 Implantable Devices with Reconfigurable Biosensing Analog Front End
J M Arunthathi
R Prabhakar
Vivekanandha College of Engineering for Women, Namakkal, India.
40. MS 4066 Customization-Oriented Product Flexible Manufacturing Experience System Design Based on VR
ZHAO Huiliang,
LYU Jian,
LIU Xiang,
LIU Zhenghong
Guizhou University, Guiyang 550025, China
41. MS 4067 Low Cyclic Fatigue behavior of Extended End plate Connection
G Durairaj,
C Arunkumar
N Umamaheswari
SRM Institute of Science and Technology,
Kattankulathur-603203,Tamilnadu,India.
42. MS 4074 Supercapacitor technology and its applications: a review
Gautham Prasad G
Nidheesh Shetty
Simran Thakur
Rakshitha
Bommegowda K B
N.M.A.M Institute of Technology, Nitte, Karnataka, India
43. MS 4078 Response of composite laminate with various cut-out combinations to tension load
Kanu Priya Jhanji,
Amit Kumar R,
Debajit Das,
Shivanshu Sarkar
Hindustan Institute of Technology and Science,
Chennai, India – 603 103
ICMSMT – Volume 2
12 – 13, April 2019, Coimbatore, Tamil Nadu, India
S.No. Paper ID Title of the Paper Name of the Authors Affiliation
44. MS 4081 An overview of analysis of Cold-formed steel stud wall subjected to blast loading
P Swetha, S A
Vengadesh Subramanian,
N Umamaheswari
SRM Institute of Science and Technology,
Kattankulathur-603203, Tamilnadu, INDIA