b-tact catalogue 2012.2

(TACTICAL ACCESSORIES) CC

Product Catalogue

B-TACT


Product Catalogue


B-TACT (TACTICAL ACCESSORIES) CC

Contact details: [email protected] 2 | P a g e

Table of Contents

Background 3

Tactical Slings & Belts 4

Shooter Mats 7

Drag Bags 8

Discrete Bags 10

Universal Taper Rifle Bags 12

Duffle Bags 14

Grab-Bags 16

Range Bags 18

Mag-Grip, Scope Guard and Suppressor Cover 20

Tactical Vests 21

Drop Leg Rigs & Holsters 22

Pouches and Patches 24

Suppressors 29

Ghillie Suits 30

General Terms and Conditions 32

Order Form 37



The beginning …

B – Tact (tactical accessories) was established in 2005 to meet the growing demand for tactical accessories

especially since imports were rarely available in the specifications required for the specific task at hand. When an

imported product could be obtained certain adjustments had to be made to the product before it could be utilized

for the purpose you had in mind which was time consuming as well as costly and in certain instances impacted the

efficiency of the product.

The designing of the first products began soon after. The product line continuously grew with every new product

concept and development. Even with the extended product line we still ensure that the products we sell are

products that we will proudly use ourselves

The Name B-Tact …

We found that to design tactical accessories we had to think, analyze and become tactical for the designs and

products to be effective and efficient, therefore the name B-Tact was an obvious choice.

What B-Tact offer …

The tactical accessories that we produce are of high quality and offer durability even in extreme conditions. In

addition on request certain custom adjustments can be done on all products, taking into account that the prices of

the specific product would vary according to adjustment requested.

Bags are manufactured according to customer material preference of 600D or 1000D or Rip-Stop Canvas material

which is available in a variety of colours.



PRODUCTS: TACTICAL SLINGS & BELTS

Tactical Sling: Single Point with bungee cord

A tactical sling permits fast and easy transition between your

primary weapon and other weapon systems.

Product code: TS 001

Tactical Sling: Two Point (3rd

point optional)

A tactical sling permits fast and easy transition between your

primary weapon and other weapon systems.


Rifle Sling

A Plain rifle sling 50mm wide


Ammunition Waist Belt

A Broad waist-belt with loops or pockets for holding ammunition

(e.g. shotgun ammunition waist-belt)

(Ammunition NOT included)




PRODUCTS: TACTICAL SLINGS & BELTS (continue….)

Tactical Sling: Dual / Biathlon

This tactical sling has 2 shoulder straps that give the operator the

ability to carry the primary weapon (rifle) system on his back.

(Rifle NOT Included)


View from another side.




PRODUCTS: TACTICAL SLINGS & BELTS (continue….)

Weigh belt: Large Molle Rig

This padded tactical belt is 70mm in width and has a dual adjustable

quick release buckle, with its large Molle type design makes it ideal

ideal for use of drop leg rigs


Tactical Weigh belt:

This stiff tactical belt is 50mm in width and has a quick release

buckle, with Velcro adjuster. This belt design makes it ideal for

use of drop leg rigs




PRODUCTS: SHOOTER MAT

Shooter Mat: Plain

Dual layer 600D material or Rip Stop Canvas

Product code: SM 001

Shooter Mat: Pro Dual layer 600D material or Rip Stop Canvas with

100cm x 70cm x 0.4cm SVA closed cell inner


Shooter Mat: Ultimate

Dual layer 600D material or Rip Stop Canvas with

100cm x 70cm x 0.4cm SVA closed cell inner with an

additional extension for rifle with Bipod and sleeve for

shooting chart or hydration pack.




PRODUCTS: DRAG BAGS



PRODUCTS: DRAG BAGS

Drag Bag: Sniper Rifle with MOLLE system

Deep rifle bag for your primary weapon systems, with diverse

configuration capability due to the Molle system.

Rifle is strapped into place for extra protection.

Product code: DGB 001

Drag Bag: Assault Rifle

Deep rifle bag for your primary weapon systems.

Rifle / Carbine is strapped into place for extra protection.


Drag Bag: Assault Rifle with MOLLE system



Rifle / Carbine is strapped into place inside for extra protection.


Drag Bag: Assault Rifle with MOLLE system

(View of back)



PRODUCTS: DISCRETE BAGS

Discrete Bag: Rifle

Standard deep rifle bag, with no extras fitted on the outside of the bag.

With inner straps the rifle is strapped into position for extra protection.

Product code: DSB 001

Discrete Bag: Assault Rifle

Standard deep rifle bag, with no extras fitted on the outside of the bag.

With inner straps the rifle is strapped into position for extra protection.


Discrete Shoulder Carry Bag (with molle system)

This bag gives you the ability to carry your assault rifle or carbine with

you without drawing attention, due to the shape that looks nothing like

a rifle bag.




PRODUCTS: DISCRETE BAGS (continue….)

Discrete Bag: Handgun Caddy

Deep bag, with no extras fitted on the outside of the bag. It has 5 magazine pouches.

With inner sleeve, to keep 2 handguns in position and for extra protection.

Molle System can be fitted to expand versatility

(Handguns & Magazines NOT Included)

Product code: HGC 001

Discrete Bag: Handgun Caddy Universal

Deep bag, with no extras fitted on the outside of the bag. It has 4 magazine pouches.

With Velcro strips to keep up to 2 large handguns (e.g. Beretta 92F) in position and for extra protection.

Molle System can be fitted to expand versatility . (Handgun, Holster and Magazines NOT Included)

Product code: HGC 003



PRODUCTS: UNIVERSAL TAPER RIFLE BAGS

Universal Taper Rifle Bag: 70

Deep rifle bag for your primary weapon systems (e.g. Hand Machine

Carbines/FN SCAR-L or LM5/LM6/Galil SAR folded). Molle system is an

added option.

Standard length of 70cm

Product code: UTB 001

Universal Taper Rifle Bag: 85

Deep rifle bag for your primary weapon systems (e.g. FN SCAR-H or

LM4/Galil ARM/FN FAL Para folded). Molle system is an added option.





PRODUCTS: UNIVERSAL TAPER RIFLE BAGS (continue….)

Universal Taper Rifle Bag: 120 with MOLLE system





Universal Taper Rifle Bag: 140 with MOLLE system






(Shotgun NOT Included)



PRODUCTS: DUFFLE BAGS

Duffle Bag: 35l

This is a basic duffle bag with no hard edges or inners , that can be

rolled or folded to store away for later use.

Can be manufactured in a wide range of colours and in 600D material

or Rip Stop Canvas.

Product code: DB 001

Duffle Bag: 35l task force

Basically the same as the standard duffle bag with the addition of

shoulder straps for easier carry capability.


or Rip Stop Canvas.


Duffle Bag: 50l

This is a basic duffle bag with no hard edges or inners , that can be

rolled or folded to store away for later use.


or Rip Stop Canvas.


Duffle Bag: 50l task force

Basically the same as the standard duffle bag with the addition of

shoulder straps for easier carry capability.


or Rip Stop Canvas.




PRODUCTS: DUFFLE BAGS (continue….)

Duffle Bag: 80l wide open

This is a basic duffle bag with no hard edges or inners , that can

be rolled or folded to store away for later use.

Can be manufactured in a wide range of colours and in 600D

material or Rip Stop Canvas.




PRODUCTS: GRAB-BAGS

GRAB-BAG: Assault (with molle system)

This Grab-Bag is manufactured with Rip Stop Canvas, with Molle System all

round for easy custom fitment of pouches and utilities.

It allows for a hydration pack to be fitted in the back

It also features a padded waist belt.

(Currently available in: Black, Military Green, Navy Blue)

Product code: GB 001

GRAB-BAG: Day pack (with molle system)

This Grab-Bag is manufactured with Rip Stop Canvas, with Molle System on

front for easy custom fitment of pouches and utilities.

It allows for a hydration pack to be fitted in the back (Optional)

(Currently available in: Black, Military Green, Navy Blue)




PRODUCTS: GRAB-BAGS (continue….)

SCHOOL-BAG: Day pack type

This School-Bag is manufactured with Rip Stop Canvas, with 2 (two) large

compartments and 1 (one) small outer pouch. Every compartment has a

10mm YKK RC zip chain with 2 (two) steel sliders per compartment and

pouch. The shoulder pads and backside are padded with SVA closed cell

foam for comfort and durability.

(Currently available in: Black, Military Green, Navy Blue and Light Brown)




PRODUCTS: RANGE BAGS

Range Bag: (NEW!!!!) Soon available in four sizes!

Range Bag: Large (with Molle System)

This Range Bag is manufactured with Rip Stop Canvas. It has Molle System right round for easy custom fitment of

pouches and utilities. The sides are padded with SVA closed cell foam.

Dimensions: 450mm x 220mm x 240mm


Product code: RB 001



PRODUCTS: RANGE BAGS (continue….)

Range Bag: Medium (NEW!!!!)

This Range Bag is manufactured with Rip Stop Canvas, with 1 (one) large compartment and 2 (two) side pouches. Every

compartment has YKK RC zip chain with 2 (two) steel sliders per compartment and pouch. The removable stiffeners

inside the bag are padded with SVA closed cell foam for durability.




Range Bag: Large (NEW!!!!)

This Range Bag is manufactured with Rip Stop Canvas, with 1 (one) large compartment and 2 (two) side pouches. Every

compartment has YKK RC zip chain with 2 (two) steel sliders per compartment and pouch. The removable stiffeners

inside the bag are padded with SVA closed cell foam for durability.






PRODUCTS: MAG-GRIP, SCOPE GUARD and SUPPRESSOR COVER

Mag-Grip:

This product gives one the ability to strap two magazines side by

side.

The blocks are made from aluminum for durability (set on left)

Magazine grips used in the set on the right are imported on special

request.

(Magazines Not Included)

Product code: MG 001

Scope Guard & Carry

This product is manufactured with a dual layer 600D material or Rip

Stop Canvas to make it durable.

It protects the scope and gives the sniper an easy way to carry the

rifle on the shooting range between exercises

It is adjustable, and fits most rifles with scopes.

(Rifle Not Included)

Product code: SG 001

Suppressor Cover:

This Cover is manufactured with Rip Stop Canvas and helps to

insulate the suppressor. The heat built up in a suppressor during

shooting can cause a mirage in front of the scope.


Product code: SC 001



PRODUCTS: TACTICAL VESTS

Tactical Vest: Front View

This tactical vest is manufactured with a durable mesh, with Molle System

all round for easy custom fitment of pouches.

It allows for a hydration pack to be fitted in the back

It is also adjustable on the shoulders and the sides

Product code: TV 001

Tactical Vest: Back view



PRODUCTS: DROP LEG RIGS AND HOLSTERS

Drop Leg Holster: Large Pistol

This holster has the capability to fit large pistols with fitted tactical

lights or laser aiming devices

(Left hand holsters also available)

Colours: Black, Military Green, Sand, Navy Blue

Product code: DLR 001

Drop Leg Holster: XX Large Pistol

This holster is manufactured for the Dual Pepper ball Pistol,

It has slots for extra ammo as well as gas propellant canisters




Drop Leg Rig

This rig is fitted with Molle System and gives you the ability to carry

extra magazines of ammunition or smoke grenades on your leg for

easy access.

(Please specify for what side it’s needed)





PRODUCTS: DROP LEG RIGS AND HOLSTERS (continue….)

Drop Leg Holster: Large Pistol

This holster is manufactured to be carried on the operator’s thigh

for fast and easy transition between your primary weapon and

handgun.



Drop Leg: Drop Pouch / Utility Pouch

This pouch is manufactured to be carried on the operator’s thigh

for fast and easy access for dropping spent cartridges or empty

magazines into.

(Left & Right sided available)


Holster: XX Large Pistol

This holster is manufactured for use with the Dual Pepper ball pistol

or other XX Large handguns, to be carried on the belt or with the

addition of shoulder sling be carried across the shoulder.



Holster: XX Large Pistol

(View of back)



PRODUCTS: POUCHES AND PATCHES

Hand Radio Pouch: (Molle system)

This pouch fits most current hand radios been used in service and

is fitted with Molle straps, so it can be strapped onto tactical vests,

bags or drop leg rigs that employ Molle system

Product code: PS 001

Suppressor Pouch: (Molle system)

This pouch can be strapped into or onto tactical vests, bags or drop

leg rigs that employ Molle system

(Suppressor sold separately)




PRODUCTS: POUCHES AND PATCHES (continue)

Ammunition Patch: (Molle system)

This patch can be strapped into or onto tactical vests, bags or drop leg

rigs that employ Molle system for easy access for e.g. 12GA Shotgun

ammunition

(Dummy rounds sold separately)


Ammunition Patch - Large: (Molle system or Velcro)

This patch can be strapped into or onto tactical vests, bags or shooter

mat that employ Molle system or Velcro for easy access to ammunition

(Suppressor sold separately)


Magazine Pouch: Large Pistol

This magazine pouch is for e.g. 9mmP. It is available in belt fit as

well as Molle system.


Magazine Pouch: Assault Rifle

This magazine pouch is for e.g. Galil, LM4/5/6, AK47. It is available in

Molle system for easy placement on or inside bags, Tactical Vests

and Drop Leg Rigs.

Product code: PS 006a



PRODUCTS: POUCHES AND PATCHES (continue….)

Magazine Pouch: Assault – Molle System

This magazine pouch is for e.g. Ak47, Galil, AR15. It has bungee cord

system to keep the magazines in place.

It’s available with Molle System, the magazine pouches can be

connected to one another to become double magazine pouches

It is available in belt fit as well as Molle system.

Product code: PS 006b

Sniper Ammo Pouch:

This pouch provides easy access to ammunition inside your rifle bag

It is available in Molle system for easy placement on or inside bags,

Tactical Vests and Drop Leg Rigs.


Sniper Ammo Pouch:

(View of inside




Rifle Rest (Sand- / Bean Bag):

This bag is manufactured with Rip Stop Canvas for durability and can

be carried empty and then be filled in the field with sand or client

can use his own choice of material to fill it.






Club Magazine Pouch:

This bag is manufactured with 600D material or Rip Stop Canvas for

durability and can accommodate 8 (eight) double stack magazines

or 16 (sixteen) 1911 type single stack magazines.

(Magazines NOT Included)




PRODUCTS: SUPPRESSORS

Suppressor: .22

These suppressors are made from steel that makes it durable. The

standard thread for .22 rifles are cut: ½ inch UNF.

They are available in 2 lengths,

Product code: SUP 001

Suppressor: .223 / 5.56mm NATO

These suppressors are made from steel that makes it durable. Thread

cut to client’s order

Please specify if suppressor is for bolt action or semi auto rifles.

Suppressor is available in aluminium for lighter product.

ALUMINIUM IS USED FOR BOLT ACTION USE ONLY!


Suppressor: .308 / 7.62mm

These suppressors are made from steel that makes it durable. Thread

cut to client’s order

Please specify if suppressor is for bolt action or semi auto rifles.

Suppressor is available in aluminium for lighter product.

ALUMINIUM IS USED FOR BOLT ACTION USE ONLY!


Suppressor:

NOTE:

• Other caliber suppressors also available to be made on

request of client.

• Suppressors also available in aluminium

Product code: SUP ### A – (aluminium)



PRODUCTS: GHILLIE SUITS

Ghillie Suit: Tux

This Ghillie suit is built on a top base e.g. jacket or sweater. To provide

coverage to the legs while stalking the back is based on a tuxedo

pattern.

Product code: GST 001

Ghillie Suit: Full

This Ghillie suit basis is a full overall e.g. flight suit or a jacket and

pants.


Ghillie Suit: Bush Rag

This Ghillie suit incorporates a poncho type base and is easy to get

into.


NOTE: All Ghillie suits are available in 2 (two) variations:

1. Burlap and Jute coverage

2. Jute coverage only



PRODUCTS: GHILLIE SUITS (continue ….)

PRODUCTS: Camo Range (continue ….)



General Terms and Conditions

Unless otherwise agreed to in writing by B-Tact (Tactical Accessories) (hereinafter called "the Closed Corporation"), the following

terms and conditions shall apply to the supply of goods and services (hereinafter called "the Goods") by the Closed Corporation to the

Customer and shall take precedence over the Customer's Terms and Conditions of Sale.

1. Obligation

A quotation represents no obligation until the Closed Corporation accepts the Customer's official Purchase Order.

2. Instructions

Verbal instructions will not be accepted by the Closed Corporation under any circumstances. All instructions must be in writing

received per facsimile or e-mail.

3. Specification

3.1. The Goods delivered will be in accordance with the specification in terms of the quotation. The Closed Corporation will not

be liable for non-compliance with any other specification. It is the Customer's responsibility to ensure that the Quotation

and Purchase Order are correct and in accordance with the drawings and/or specifications.

3.2. Changes to the drawings and/or specifications by the Customer will be undertaken only by agreement in writing with the

Closed Corporation. If any such changes cause an increase in the cost or time required for performance, the Closed

Corporation shall be entitled to an equitable adjustment in the contract price and the delivery schedule.

3.3. The order of precedence for this Purchase Order shall be the :

3.3.1. Closed Corporation’s design and/or specifications;

3.3.2. Customer's design and/or specifications;

3.3.3. Closed Corporation's Quotation;

3.3.4. Customer acceptance of the Close corporation’s quotations

3.3.5. Customer’s official purchase order and payment

4. Applicable Law

The Quotation, Purchase Order and any Agreement that shall result there from shall be governed by the laws of the Republic of

South Africa.

5. Payment

5.1. Unless otherwise agreed to in writing, the Customer shall effect payment for the Goods with placement of order. Interest

shall be paid on all overdue amounts at the rate of 1,5% per month or part thereof unless otherwise agreed.

5.2. All prices quoted are exclusive of VAT unless otherwise stated.

5.3. All prices quoted are exclusive of postage charges unless otherwise stated.



5.4. In the event of the Customer failing to effect payment of the purchase price, the Closed Corporation shall be entitled, at its

option, and notwithstanding any indulgence or relaxation granted to the Customer without prejudice to any other rights it

may have in terms of this agreement or common law, to cancel this contract and repossess the Goods and/or claim the

balance thereof. The Closed Corporation shall be entitled to re-sell such Goods either by auction or by private treaty.

5.5. The Customer shall be liable for any shortfall or shall be passed a credit note for all amounts received in excess of the

expenses of recovery and resale.

5.6. The Customer shall be liable for all legal costs, including collection charges, incurred by the Closed Corporation in the

recovery of such debt on the Attorney and Own Client Scale.

The Customer shall pay all accounts in full and cannot exercise any rights of set-off or counterclaim against invoices submitted.

6. Price Fluctuations

Unless otherwise stated the price quoted in the Quotation or Offer, the price is in South African Rands and exclusive of cost such

as freight, applicable insurances, coastal and landing charges, customs, dock and import duties, cartage and railage, rates of

exchange, any statutory costs and all other such similar encumbrances.

However, if after the date of the Closed Corporation’s Quotation (whether before or after the placing of the Purchase Order),

these costs will be for the Customer's account.

7. Delivery

7.1. The Closed Corporation undertakes to make every effort to meet the delivery period as quoted, but does not guarantee to

do so. The Closed Corporation will not under any circumstances accept responsibility for delivery delays due to causes

beyond its control, including, but not limited to, acts of God, fire, explosion, strikes, lockouts, inability to obtain

components, delays by sub-contractors, actions by government, or losses and delays in transit. A reasonable extension of

time shall be granted to the Closed Corporation in event of any delays that are beyond its control. The place of delivery will

be as specified on the quotation.

7.2. Where the Goods are not delivered by the Closed Corporation or collected by the Customer, but are delivered to an

independent carrier, delivery to the carrier shall be deemed to be delivery to the Customer.

8. Risk and Ownership

8.1. Where the Goods have been delivered pursuant to Clause 7.2, the appointed carriers shall be fully responsible for materials

lost or damaged in transit.

8.2. The ownership in the Goods shall not pass to the Customer until all amounts due from the Customer to the Closed

Corporation in respect of Goods sold, delivered or made available in any other way to the Customer has been paid for in full.

8.3. The Closed Corporation shall have the right at any time to give notice of its continued ownership in the Goods to every

possessor and every landlord of premises in which the Goods are stored or may be placed, whether for sale, repair,

assembly or otherwise.

8.4. Without prejudice to any of its rights in terms of law, the Closed Corporation reserves the right to enter the Customer's

premises and to repossess the Goods in the event of the Customer failing to make any payments on due date or at all.



9. Packaging, Packing and Shipment

Packing will be in accordance with the Closed Corporation’s standards, unless otherwise specified in writing. Any special packing

required by the Customer will be charged for as an extra.

10. Cancellation

10.1. In the event of cancellation by the Customer of the contract or part thereof, or in the event of the Closed Corporation

canceling the contract as a result of a breach by the Customer of any of these conditions, the Closed Corporation shall be

entitled to payment of a standard cancellation fee not less than 50% of the value of the contract so cancelled, or in the

case where a 50% deposit was paid by the Customer it will so be forfeited by the Customer to the Closed Corporation plus :

10.1.1. The sales value of all Goods delivered.

10.1.2. The sales value of all Goods finished and not delivered at the time of such cancellation.

10.1.3. The sales value of all materials ordered by the Closed Corporation especially for such order whether such

materials have been received or not.

10.1.4. The cost of all labour accumulated on any unfinished Goods in process of manufacture.

10.1.5. The sales value of any special engineering and other costs incurred up to the time of cancellation.

10.2. The Closed Corporation shall be entitled to suspend or cancel further deliveries and to suspend or cancel work under this

or any other contract between the Closed Corporation and the Purchaser if any payment is overdue.

10.3. The Closed Corporation may, by notice in writing, cancel the Purchase Order if the Customer becomes insolvent or makes

an arrangement with its creditors or goes into voluntary liquidation or is placed under a provisional or final order of

sequestration or judicial management.

11. Warranty

11.1. Unless otherwise agreed in writing, the Closed Corporation warrants that in the event of any defect occurring within a

period of one year or any other period as agreed to in writing from the date of delivery to the Customer, as a result of

faulty material or workmanship which can be attributed to the Closed Corporation, the Closed Corporation will repair, or

refund the cost of the Goods at its option provided that :

11.1.1. The Goods have not been misused, inadequately stored, neglected or used for other than its intended purpose, or

if its operating instructions have not been adhered to;

11.1.2. The Goods have not been serviced by any person who has not been authorized by the Closed Corporation;

11.1.3. The Closed Corporation is notified in writing within the warranty period and the Goods or faulty component

thereof is sent to the Closed Corporation's designated address at the Customer's risk.

11.2. Should any parts, materials or components forming part of the Goods sold by the Closed Corporation to the Customer, be

manufactured by anyone else than the Closed Corporation, then the manufacturer's normal warranty in respect of those

parts, materials or components shall apply and no further warranties in this regard will be given by the Closed Corporation.

The Closed Corporation's liability will not extend beyond that of the manufacturer's liability.



12. Return of Goods

12.1. The Customer shall not be entitled to return any Goods to the Closed Corporation without the Closed Corporation's

express consent.

12.2. Unless otherwise agreed in writing, the Closed Corporation's normal express consent for the return of Goods shall be by

means of a Return Material Authorization (RMA).

12.3. No claim regarding material defects will be entertained by the Closed Corporation unless made in writing and delivered to

the Closed Corporation within the warranty period from the date of delivery of the Goods.

12.4. In the event of material defects or shortages in the Goods proved to the Closed Corporation's satisfaction and upon being

properly notified, the Closed Corporation shall at its option :

12.4.1. Either exchange the Goods for similar Goods; or

12.4.2. Repair the Goods.

12.5. If no material faults are found with the Goods, then the Closed Corporation will charge a handling fee of 50% of the sales

price of the Goods.

13. Indemnity

The Customer shall indemnify the Closed Corporation against all damages, penalties, costs, charges and expenses to which the Closed

Corporation may become liable as a result of work done in accordance with the Customer's drawings and/or specifications.

14. Liability

14.1. These terms set out the Closed Corporation’s entire liability in respect of the Goods and the Closed Corporation's liability

under these terms shall be in lieu and to the exclusion of all other warranties, conditions, terms and liabilities expressed or

implied statutory or otherwise in respect of the quality or the fitness for any particular purpose of the Goods.

14.2. The Closed Corporation shall not, under any circumstances, be liable for:

14.2.1. Any loss or injury whatsoever (including indirect or consequential loss including loss of profit) arising from the

supply of the Goods, including any loss or injury (whether direct, indirect or consequential) attributed to any

negligent act of the Closed Corporation or the Closed Corporation's servants or agents'; or

14.2.2. Any representations or warranties as to the Goods given by any of the Closed Corporation’s servants or agents;

14.2.3. Any loss or injury (whether direct, indirect or consequential) attributed to any misuse of the Goods or any

negligent act by the Customer.

15. Intellectual Property Rights

Any patent, copyright or other intellectual property rights owned by the Closed Corporation shall remain those of the Closed

Corporation whether or not the purchase price under that transaction has been paid by the Customer. Any information obtained by

the Customer from the Closed Corporation which is identified as confidential and/or proprietary or is confidential and/or proprietary

in nature, may not be disclosed to any third party without the prior written approval of the Closed Corporation.



16. General

16.1. This document constitutes the sole and entire agreement between the parties.

16.2. The Closed Corporation shall not be bound by any express or implied term, representation, warranty, promise or the like

not recorded herein.

16.3. No addition to, variation of, or agreed cancellation of this contract shall be of any force or effect unless reduced to

writing and signed by both parties.

16.4. No indulgence which the Closed Corporation may grant to the Customer party shall constitute a waiver of any of the

rights of the Closed Corporation, who shall not thereby be precluded from exercising any rights against the Customer

which may have arisen in the past or which might arise in the future.

17. Notices

All notices or demands to either party shall be in writing and may be served by hand delivery, registered mail, e-mail or facsimile at

the address of the receiving party as set forth in the Request for Quotation, Quotation or Purchase Order as applicable. All notices and

demands by mail shall be deemed to have been received within seven (7) days of postage, unless proved otherwise by the receiving

party.



ORDER FORM

PRODUCT

CODE ADDITIONAL DESCRIPTION COLOUR SIZE QUANTITY

CONTACT DETAILS (complete in PRINT)

NAME _________________________________________________________________

SURNAME _________________________________________________________________

CONTACT NUMBER _________________________________________________________________

FAX NUMBER _________________________________________________________________

E-MAIL ADDRESS _________________________________________________________________

PREFERED CONTACT HOURS _________________________________________________________________

b-tact catalogue 2012.2

Documents