8/11/2019 B00492 SAFEmine Driver Iden.pdf

1/2

Driver Identification

The SAFEmine DriverID Reader allows

operator-specic reporting from the

SAFEmine Collision Avoidance System,

including buddy starting

Who is operating your equipment?

Want reports on buddy starting (unauthorized vehicle use)?

Need driver specific safety reports for training purposes?

Check out Collision Avoidance with Driver ID for most detailed reporting.

* SAFEmine is a Trafc Awareness and Collision Avoidance System (CAS), suitable for all vehicles operating in surface mines. Providing visualand audible proximity information and warnings of possible collisions, it improves operator trafc awareness, particularly in blind spots around

the vehicle.

Features

Integrates SAFEmine DriverID with SAFEmine Collision Avoidance* into one single display, reducing cabin clutter

Back-to-base reporting with SAFEmine TRACK

Robust and mine proven RFID reader for Smart Cards (ISO 14443 B) 100% compatible with >12000 vehicles worldwide protected by SAFEmine

Simple installation and maintenance

Main Applications

Haul Trucks

Additional heavy mining equipment such as shovels, excavators, dozers, etc.

Light vehicles

Other mining equipment, where identication of operator is important

8/11/2019 B00492 SAFEmine Driver Iden.pdf

2/2

KwaZulu Natal: Northern Cape: Zambia:

T:+27 (0)31 303 4129 T:+27 (0)53 723 3415 T:+26 (0)21 222 5338

Gauteng (HO): North West: Mpumalanga: Western Cape:

T:+27 (0)11 823 5650 T: +27 (0)14 596 5257 T:+27 (0)13 692 8132 T:+27 (0)21 945 1453

trading@trysome.cc www.trysome.cc P.O. Box 13677, Witeld, 1467

B00490

WE KEEP THE EARTH MOVING!

Benefts

Enhances existing SAFEmine Collision Avoidance Systems (CAS) installations with operator specic reporting, protecting

investments

Only one cabin display/unit for Collision Avoidance and DriverID, reducing cabin clutter, improving operator understanding

due to easier learning of one interface only and improving cost efciency

Uses standardized Smart Cards (ISO 14443 B), also available in dual mode versions suitable for commonly used access

control systems

Simple installation and low maintenance

Applications

100% compatible with SAFEmine CAS and with further SAFEmine trafc safety systems as SafetyCentre, Fatigue

Monitoring, Personal Protection, etc.

Back-to-base reporting of all information through SAFEmine TRACK, including web based viewer.

Operator specic reporting (e.g. speeding, seat belts, alarm statistics, etc.) also on attempts to operate vehicles without

permission.

Buddy starting (multiple operator) and hot wiring detection, and reporting.

All SAFEmine TRACK reports can be operator specic and used for operator training. Visual alerts and voice messages for operators.

Reports sent by email, text message alerts for supervisors.

Runs on well proven embedded hardware and rmware.

Can supply Driver ID to most third party systems (through TRACK server or SafetyCentre)

Technical Data

Power supply Supplied by CAS Main Unit (QC240 or QC250)

Power consumption 100mA at 12 24VDC

Operator interface Smart Card interface only, operator presents card to reader

Electrical interfaces WiFi, Ethernet, USB, CAN, and serial interfaces

IP rating IP 65, maintenance free as Smart Card interface is contactless

Compatibility 100% compatible with SAFEmine CAS Main Units QC240 and QC250