b70a185-000

INFORMATION ON REPAIRS OF PART In case of replacing the parts shown in the Current spec. column, please use the parts shown in the Substitute spec. column referring to the instructions below.

Item: DC FAN MOTOR Representative model name: FXYMP140A

Current spec. Substitute spec.

*Parts No. Drawing No. Model/Spec. *Parts No. Drawing No. Model/Spec. Accessories

Applicable model: Circle either one of the following Items 1. Applicable all models 2. Limited applicable models (Enter applicable model names in the blank) Note. If the serviceman needs to do works such as modification and setting change, mention it in the replacing method sheet. Refer to the contents after the 3rd page for the exchange points.

For further information, contact your nearest contact-centre.

DATE Sep. 8, 2010 No. B70A185 1/8

Refer to page 2

(KY22019)

Current parts spec. Substitute parts spec.

*Parts No. Drawing No. Model/ Spec.

*Parts No. Drawing No. Model/Spec. Replacing method sheet

Applicable model

125001221 125001299 AXSP112P7-W AXSP140P7-W FMDQ100B7VEB FMDQ125B7VEB FXMQ100P7VEB FXMQ125P7VEB FXSQ100P7VEB FXSQ125P7VEB FXSQ140P7VEB S-100FM4JPQ S-125FM4JPQ FBQ100C7VEB FBQ125C7VEB

5001221 3P204674-1 Abbreviation

350B-28

Earthed line

None

Ferrite core:

None

FBQ140C7VEB AXMP112A AXMP140A AXMP90A FBQ100DVET FBQ125DVET FBQ140DVET FGXMP112A FGXMP140A FGXMP90A FXMQ36PVJU FXMQ48PVJU FXYMP112A FXYMP140A FXYMP160A FXYMP90A YDP140A YZDP112A YZDP140A

2013235

3P274034-1 Abbreviation

350N-28

Earthed line

Available

(L=400mm,

M5)

Ferrite core:

None

YZDP90A FHMP112AB FHMP112AL FHMP140AB FHMP140AL FHMP160AB FHMP160AL

1863615

5001221

4006123

3P204674-1

3P204674-2

Abbreviation

350B-28

Abbreviation

350G-28


350G-28

Ferrite core:

Available

(FT-47M55J-C

TY:Vendor

UENO)

DATE Sep. 8, 2010 No B70A185 2/8

Current parts spec. Substitute parts spec.

*Parts No. Drawing No. Model/ Spec.

*Parts No. Drawing No. Model/Spec. Replacing method sheet

Applicable model

FBQ100DV1 FBQ100DV14 FBQ125DV1 FBQ125DV14 FBQ140DV1 FBQ140DV14 FBQ30DV2S FBQ36DV2S FBQ42DV2S FBQ48DV2S FXMQ100PVE FXMQ100PVE4 FXMQ100PVE6 FXMQ100PVED FXMQ100PVES FXMQ125PVE FXMQ125PVE4 FXMQ125PVE6 FXMQ125PVED FXMQ125PVES FXMQ140PVE FXMQ140PVE4

1863615

5001221

4006123

3P204674-1

3P204674-2

Abbreviation

350B-28

Abbreviation

350G-28


350L-28

Earthed line

Available

(L=315mm,M4)

Ferrite core:

Available

TRM-47-27-15

E-WE)

KITAGAWA

Ind. LTD.

FXMQ140PVE6

EXCHANGE POINT (Page 1/1)

Since there is compatibility, please attach as it is.

DATE Sep. 8, 2010 No B70A185 2/8


One of the attachment bolts of the motor base is loosened to crimp style terminal at the tip of the earth wire attached to the motor, and fasten crimp style terminal to it together. (It is based on the following figure) Since there is compatibility except it, attach as it is.

DATE Sep. 8, 2010 No B70A185 3/8


1. Exchange the presence of the ground lead of the motor before it exchange it in the confirmation by the following items. (When the earth wire is attached to the motor before exchange) Since there is compatibility when it is going to exchange motors and the motor to which the ground is already attached is carried (exchange), attach as it is. Do not cut the earth wire attached to a motor. (When the earth wire is not attached to the motor before exchange) When it is going to exchange motors and the motor to which the ground is not attached is carried, cut and remove first the earth wire attached to the substitute motor from the current motor. (Refer to the following figure)

DATE Sep. 8, 2010 No B70A185 4/8


2.The ferrite core is added to the substitute on the way of the motor lead wire and fix it according to the following drawing. The hole is open in the center part in the added ferrite core. The banding band has adhered beforehand for the cover coming off prevention.

The motor electric wire is drawn in the switch box and it fixes in the banding band. It saw the back of the switch box. Because the ferrite core comes in contact, the motor harness is not fixed to the wire guide.

DATE Sep. 8, 2010 No B70A185 4/8

Hole

Banding

band


The ferrite core is turned and it binds to the hole of the vinyl cover with the wire of the motor through banding band. It binds so that ferrite core may come near to the heat radiation fin side.

The high-voltage line is fixed to the band made of the resin on the switchbox edge through the banding band.

DATE Sep. 8, 2010 No B70A185 7/8


The high-voltage line of the surplus is bundled in the banding band. The low-voltage side is similarly bundled.

The banding band of the addition is passed through the hole in the ferrite core. The ferrite core is fixed with a part of high-voltage line by using this banding band. The ferrite core is firmly fixed by the above-mentioned work.

DATE Sep. 8, 2010 No B70A185 8/8

Binding band

Binding band for ferrite core

b70a185-000

Documents