ba - pdf.lowes.compdf.lowes.com/dimensionsguides/026508275993_meas.pdf · ba for more information...
TRANSCRIPT
CRITICAL DIMENSIONS(DO NOT SCALE)
DESCRIPTION• Various finishes identified by suffix • Handheld shower • 69" double interlock spiral hose (metal)• Double check valve in handle• 30" slide bar with push button height selection OPERATION• Single function• Handshower holder rotates to adjust angle of handshower FLOW• EP17 suffix models designed to deliver 1.75 gpm (6.7 L/min) max• EP suffix models designted to deliver 2.0 gpm (7/6 L/min) max at 80 psiSTANDARDS• Designed and manufactured to meet: ASME A112.18.1/CSA B-125.1,
ASSE 1014 and all applicable specifications referenced therein WARRANTY• Limited lifetime warranty against material or manufacturing defects
90 DEGREE™Single Function Handshower
w/Slide Bar
Model: S3879EP series
FINISHED WALL LINE
Drop ell soldseparately
3-1/8”
(80mm)
5/8”
(15mm)
8-3/4”(223mm)
30-5/8”(778mm)
Hole Size5/8” (17mm)
2”(50mm)
1-5/8”(40mm)
2-1/8”(54mm)
�� � �� �� � �� � �B � � � A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.comRev. 7/14
CRITICAL DIMENSIONS(DO NOT SCALE)
TS2713sp: Rev. 5/13
THIN WALL APPLICATIONTHICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
2" CC (51mm) 1-7/8" IPS (48mm)
MAX WALL
HOTINLET
COLDINLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)WALL OPENING
FLOOR
45" (1143mm)/48" (1219mm)-SHOWER
32" (813mm)-TUB ORTUB SHOWER
7-1/2" (191mm)
MIN
TUB RIM
6'-6" (1981mm)
L C
1-3/8" (35mm)
2-1/2" MAX. (63mm)
1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm)
FLOOR LINE
1-3/8"(35mm)
1-1/2" (38mm)
3/16" (typ) (5mm)
PLASTER GROUND 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN.
DIAMETER WALL
OPENING
PLASTIC TUB/SHOWER
SURROUND
L C
6-3/16”(157mm) 2-1/2”
(64mm)
6-7/16”(164mm)
2-7/16”(62mm)
7-1/4”(185mm)
8-3/8”(213mm)
FAUCET DESCRIPTION• Metal construction with various finishes identified by suffix • Includes showerhead, arm, flange and diverter spoutOPERATION• Lever style handle with temperature indicator on the escutcheon• Handle operates counterclockwise through a 270˚ arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum hot watertemperature
• Pressure balancing mechanism maintains selected discharge temperature to ± 3.6° F (±2˚ C)
FLOW• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi • EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi • NH suffix models contain no showerhead CARTRIDGE• 1222 cartridge design• Nonmetallic/nonferrous and stainless steel materials• Accommodates back to back installationsSTANDARDS• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein • EP suffix models are third party certified to WaterSense®
• ADA for lever handle
WARRANTY• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser• 5 year warranty if used in commercial installations
90 DEGREE ™ POSI-TEMP®
Single-Handle Tub/Shower Trim Kit
Model: TS2711 series - valve trim only
TS2712 series - shower trim only
TS2713 series - tub/shower trim only
Valves: 62300, 2500 series
� � � �� �� � �� � �B � � � A
EP Suffix
Models Only
Specifications
DESCRIPTION• Brass construction• 1/2" CC, IPS, or PEX connections with 1/4 turn stops
• Pressure balancing, four port, cycle valve
OPERATION• Adjustable temperature limit stop to control maximum hot
water temperature• Pressure balancing mechanism maintain selected discharge
temperature to ± 3°F
CARTRIDGE• 1222 cartridge design• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS• Third party certiied to meet CSA B125.1, ASME A112.18.1,
ASSE 1016, and all applicable requirements referenced therein • Moen’s Posi-Temp® and Moentrol® valves with graphite
composite spools combined with Moen’s Eco-performance showerheads meet the performance requirements of pressure and temperature variation of ASSE1016 when
tested as low as 1.5 gpm
WARRANTY• Lifetime limited warranty against leaks, drips and inish defects
to the original consumer purchaser• 5 year warranty if used in commercial installations
POSI-TEMP® VALVE
Pressure-Balancing Valve with
1/4 Turn Stops
Single Pack
Models: 2570 (CC), 2590 (IPS), 2580 (PEX)
Bulk Packed
Models: 62370 (CC), 62390 (IPS)
(Bulk packed 12 per carton)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS(DO NOT SCALE)
TUB
SHOWER
FLOOR
1/2" CC SUPPLY
2-5/16" (59mm) C.C.
4-1/2" (114mm) PLASTERGROUND SIZE AND
WALL OPENING
2" CC (51mm)1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR TUB SHOWER
45" (1143mm)/48" (1219mm) - SHOWER
2-7/8" MAX. (73mm)
7/8" MIN. CC & IPS (22mm)
1" (25mm)
FLOOR LINE
1"(25mm)
LC
2-1/8" (54mm)
3/16" (typ) (5mm)
PLASTER GROUND3-1/2" (89mm) MAX.2-1/4" (57mm) MIN.
PLASTICTUB/SHOWER
SURROUND
DIAMETERWALL
OPENING
Rev. 7/16
FINISHED WALL LINE
4"(102mm)
CRITICAL DIMENSIONS(DO NOT SCALE)
������������B���A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
3-Function Transfer Valve Trim Kit
Models: TS4172 series
Valve: 3372
Rev. 12/11
DESCRIPTION
• Metal construction with various finishes identified by suffixOPERATION
• Rotational control with 180˚ of rotation with stopsSTANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein
• for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
ADA
CRITICAL DIMENSIONS(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DROP ELL
Models: A721 series
DESCRIPTION
• Metal construction with various finishes identified by suffix WARRANTY
• Lifetime warranty against material or manufacturing defects
1.85”
(47mm)
3/8”
(10mm)
Finished
Wall Surface
Side ViewBack View
1/2-14 NPT
1/2-14
NPSM Thread
1" (25mm) MinimumDiameter Hole
Pipe (Not Included)
2/12
CRITICAL DIMENSIONS(DO NOT SCALE)
������������B���A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Two function transfer valve - 2 discrete outputsOPERATION
• 180˚ rotational controlCARTRIDGE
• 162154 cartridgeSTANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks and drips to the original consumer purchaser
• 5 year warranty if used in commercial installations2-Function Transfer Valve
Model: 3375
FINISHED WALL LINE
2" Max Wall(51mm)
Floor
PlasterGround
3/16" "Typ"(5mm)
2-3/8"(60mm)
2-1/8"(54mm)
WALL OPENING
PlasterGround
PlasticTub/Shower
Surround
Face ofStud
1/2" MIN. CC (13mm)
2-1/2"(63mm)
WALL OPENING
THIN WALL APPLICATIONTHICK WALL APPLICATION
Rev. 2/12