bab 0 introduction 1
TRANSCRIPT
PENGALATAN DAN PENGALATAN DAN PENGUKURAN PENGUKURAN ELEKTRIKELEKTRIK (BEE2123)(BEE2123)
Asmarashid bin PonniranAsmarashid bin PonniranJabatan kejuruteraan Elektrik Kuasa Jabatan kejuruteraan Elektrik Kuasa (JEK)(JEK)Fakulti Kejuruteraan Elektrik dan Fakulti Kejuruteraan Elektrik dan ElektronikElektronikKolej Universiti Teknologi Tun Hussein Kolej Universiti Teknologi Tun Hussein OnnOnn
Panduan KursusPanduan Kursus
Academic BackgroundAcademic Background
Name:Name: Asmarashid bin Ponniran ([email protected])
Education:Education:2003 – 2005 : M.Eng. (Electrical – Power) – UTM 2000 – 2002 : B.Eng. (Electrical – Information System) – KUiTTHO
1997 – 1999 : Diploma in Electrical Engineering – ITTHO
Specialization: Specialization: High Voltage, Information System
Research Interest:Research Interest:High Voltage Application and Web Based Development – OOD/P.
Room:Room: Lecturer Building (C 15 – 001 – 08)
Phone:Phone: 07-4537588 / 0137257570, [email protected]
Homepage: Homepage: Under constructionUnder construction
Course ContentsCourse Contents
Course aim:Course aim: To provide the broad understanding of essential aspects of instrumentations and measurements in electrical field.
Course outline:Course outline:This course is about analog and digital instrumentations, measurement techniques, sensors and transducers.
Course structures:Course structures:Lecture – 3 (compulsory)Tutorial – 1 (compulsory)Lab. session – 0
Course TimetableCourse Timetable
FOR BET STUDENT ONLY
Wednesday 8 a.m. – 10 p.m. (Lecture)
BS-A5
Friday 9 a.m. – 10 a.m. (Lecture)
BS-A5
Friday 10 a.m. – 11 a.m. (Tutorial)
BS-A5
Course policies and Course policies and proceduresprocedures
Course assessment:Course assessment:
Item %
Quizzes (at least 5 – without prior notice) 5%
Individual Assignment (report + presentation) 10%
Group Project (project + report + presentation) 10%
Test 1 15%
Test 2 10%
Final Examination 50%
TOTAL 100%
Course policies and Course policies and procedures (cont…)procedures (cont…)
Lectures/tutorials:Lectures/tutorials: Students are expected to be
punctual in lecture and tutorial sessions.
The course itself is definitely fast-paced. Keeping up will prove essential to your success.
Class attendance for lectures and tutorial should be viewed as mandatory for those desiring high grades.
Course policies and Course policies and procedures (cont…)procedures (cont…)
Assignment:Assignment: For full-credit, assignment/report must be
submitted on assigned date. For any assignments which is late
submission will be penalized 25%. Assignments are handed in more than one
day late will not be accepted. Co-operation is allowed on assignments,
but each student MUST hand-in their own individual work. You must be able to explain line by line your assignment/report.
I will notice either to use Bahasa Melayu or English to work your assignment/report.
Course policies and Course policies and procedures (cont…)procedures (cont…)
Test:Test: Makeup for missed tests will
be allowed in the event of an illness or emergency. There will be no makeup for unexcused absences.
Course policies and Course policies and procedures (cont…)procedures (cont…)
Academic integrity:Academic integrity: KUiTTHO puts a very high value on
academic integrity, and violations are not tolerated.
I encourage students to help one and another, but plagiarizing will not tolerated in this course.
You should be able to explain to me every single details of your solution to the related assignment.
Both or more parties involved in the plagiarizing case will get zero points.
Course policies and Course policies and procedures (cont…)procedures (cont…)
My expectations:My expectations: Read the course material or any
text books. Come five minutes before lecture/tutorial and review your previous notes.
I expect all students to be respectful of their fellow students (and me).
I expect you to be alive and kicking during lecture, and responsive to my questions.
Please turn your mobile phone off/vibrate mode.
E-learningE-learning http://ilmu.kuittho.edu.my
General CommentsGeneral Comments
The do’s and the don’t Dress in appropriate way
(ETIKA BERPAKAIAN DAN SAHSIAH RUPA DIRI PELAJAR)
Show your professionalism (future engineer) Attitude Time management Quality of your job
Software Software
1) PSpice
2) Orchad
3) Matlab
4) Mathcad
5) Others…
Important DatesImportant Dates
WEEKWEEK DATEDATE IMPORTANT ACTIVITIESIMPORTANT ACTIVITIES
Week 1Week 1 10 July 2006 – 14 July 2006
Week 2Week 2 17 July 2006 – 21 July 2006 Assign of Individual Assignment and Group Project
Week 3Week 3 24 July 2006 – 28 July 2006
Week 4Week 4 31 July 2006 – 4 August 2006
Week 5Week 5 7 August 2006 – 11 August 2006
Week 6Week 6 14 August 2006 – 18 August 2006
Test 1 (15%)Friday (10 a.m. – 11 a.m.)18 August 2006
Week 7Week 7 21 August 2006 – 25 August 2006
Week 8Week 8 28 August 2006 – 1 Sept 2006
Pre-presentation for group project
4 Sept 2006 – 8 Sept 2006 Mid term break
Important DatesImportant DatesWEEKWEEK DATEDATE IMPORTANTIMPORTANT
Week 9Week 9 11 Sept 2006 – 15 Sept 2006
Week Week 1010
18 Sept 2006 – 22 Sept 2006
Dateline for individual assignment (report) (10%)Friday (till 5 p.m.)22 Sept 2006
Week Week 1111
25 Sept 2006 – 29 Sept 2006
Week Week 1212
2 Oct 2006 – 6 Oct 2006 Test 2 (10%)Friday (10 a.m. – 11 a.m.)6 Oct 2006
Week Week 1313
9 Oct 2006 – 13 Oct 2006
Week Week 1414
16 Oct 2006 – 20 Oct 2006 Dateline for group project (product + report + presentation) (10%)Friday (9 a.m. – 11 a.m.)20 Oct 2006
Week 15 – Week 15 – 1616
21 Oct 2006 – 5 Nov 2006 Study week (2 weeks)
Week 17 – Week 17 – 1919
6 Nov 2006 – 24 Nov 2006 Exam week (3 weeks)
Perancangan KuliahPerancangan KuliahMINGGU TAJUK
1 1.RALAT DALAM PENGUKURAN1.Ralat kasar dan ralat sistematik2.Ralat mutlak dan ralat relatif3.Ketepatan, kejituan dan nombor bererti4.Ralat gabungan bagi pengukuranmenggunakan lebih dari satu alat5.Analisis statistik asas – min, sisihan, sisihan piawai.
KUIZ 1
2,3 2. METER ASAS DALAM PENGUKURAN AT1.Meter geglung bergerak magnet kekal (GBMK)2.Ammeter AT, pelbagai julat3.Voltmeter AT, pelbagai julat4.Penentukuran ammeter dan volmeter5.Ohmmeter siri dan pirau6.Kepekaan meter7.Megger – megaohmmeter
KUIZ 2
PEMBERIAN PROJEK KUMPULAN DAN TUGASAN INDIVIDU
4,5 3. METER ASAS DALAM PENGUKURAN AU1.Gelombang sinus2.Elektrodinamometer3.Meter gerakan bilah besi4.Voltmeter penerus separuh gelombang dan gelombang penuh5.Ammeter penerus separuh gelombang dan gelombang penuh6.Pengukuran kuasa7.Pembetulan faktor kuasa8.Wattmeter
KUIZ 3
Perancangan Kuliah Perancangan Kuliah (samb..)(samb..)
MINGGU TAJUK
6,7,8 1.PENGUKURAN MENGGUNAKAN TETIMBANG1.Pengukuran rintangan – kaedah voltmeter-ammeter2.Titian Wheatstone3.Titan Kelvin4.Gegelung ujian Murray5.Gegelung ujian Varley6.Pengukuran rintangan tinggi7.Pengukuran kearuhan dan kemuatan8.Titian perbandingan kemuatan9.Titian Wien10.Titian Schering11.Titian perbandingan kearuhan12.Titian Maxwell13.Titian Hay14.Faktor Q dan D
UJIAN 1
9,10 1.PENGUKURAN GELOMBANG1.Operasi dan binaan osiloskop2.Pengukuran voltan, frekuensi, tempoh dan fasa3.Rajah Lissajous4.Pengukuran denyut5.Prob osiloskop
HANTAR TUGASAN INDIVIDU/KUIZ 4
Perancangan Kuliah Perancangan Kuliah (samb..)(samb..)11,12 1.PERALATAN DIGITAL
1.Ulangkaji get-get asas, flip-flop, paparan digital dan kiraan digital2.Perbandingan alatan digital dan analog3.Penukar analog ke digital4.Penukar satu-cerun dan dua-cerun5.Penukar voltan ke frekuensi6.Pembilang elektronik7.Digital multimeter
UJIAN 2
13,14 1.PENGESAN DAN TRANSDUSER1.Pengenalan kepada pengesan dan transduser, klasifikasi dan criteria pemilihan2.Tolok terikan – terikat dan tidak terikat3.Perwakilan litar bagi tolok terikan4.Termistor5.Termogandingan
KUIZ 5
PEMBENTANGAN PROJEK KUMPULAN
PEPERIKSAAN AKHIR SEMESTER
ReferencesReferences• Digital Systems: Principles and Applications, 9th Ed.;
Ronald J. Tocci, Neal S. Widmer and Gregory L. Moss, Prentice Hall, 2004.
• Principles and Applications of Electrical Engineering, 4th Ed.; Rizzoni G.,; McGraw-Hill, 2003.
• Fundamentals of Electric Circuits, 2nd Ed.; Alexander C. K. & Sadiku M. N. O., McGraw-Hill, 2000.
• Theory and Design for Mechanical Measurements; Richard S. Figliola and Donald E. Beasley; John Wiley and Sons, Inc., 2006.
• Electronic Instrumentation and Measurements; David A. Bell; Prentice Hall Career and Technology, 1994.
Electrical engineering disciplines
Electrical engineering systems in the automobile
Quiz - 1
• State the difference between DC and AC.
• State the difference between Analog and Digital environment.
• Describe how semiconductor device operate.
• State the difference between DC machine and AC machine.
Dear students,Dear students,
All the best…