bafl installation drywall - frasch · 2021. 1. 20. · bafl installation (non-lit) - drywall...
TRANSCRIPT
-
frasch.co | 682.200.3005
Tools Needed
BAFL Installation (Non-Lit) Acoustical Baffle These installation suggestions consist of a common process for baffle installation. Installers should rely upon their own professional experience and understanding of their unique requirements to ensure a successful install.
Confirm your Unistrut installation has been completed. Consult with a professional about a proper installation for your ceiling type (concrete vs. sheet-rock).
Unwrap Baffle from plastic Wrap. Confirm baffle dimensions match your needs.
H
WL
Drill
Hanger Bolt Driver(IVY classic)
Items Included
1.
Baffle
(2) Hanger Bolt
(2) Griplock
(2) Aircraft Cable or (2) Threaded Rod(2) Coupler Nut
01 of 05Rev 12-2019
-
If your baffle is pre-drilled with hanger bolts inserted, go to step 4.
If your baffles came without pre-drilled hanger bolts, follow this step:Measure the distance between the two Unistruts that will be holding the baffle. Match your hole location distance to the distance of the Unistruts. Use a drill machine to make a 1/8” pilot hole for hanger bolts.
2.
Use 1/4” - 20 hanger bolt driver tool to drive bolt into place, leaving 3/2” of the 1/4” - 20 threads exposed.
3.
frasch.co | 682.200.3005
Make 1/8" pilot hole
BAFL Installation (Non-Lit) Acoustical Baffle
02 of 05Rev 12-2019
-
Screw the coupling nut all the way on to the hanger bolt.4.
frasch.co | 682.200.3005
BAFL Installation (Non-Lit) Acoustical Baffle
03 of 05Rev 12-2019
-
Threaded Rod Specific Step ONLYCut 1/4” threaded rod at desired length and srew in half way into the coupler nut.
6a.
frasch.co | 682.200.3005
Aircraft Cable Specific Step ONLY. Cut the excess cable using cable cutter.
6b.
BAFL Installation (Non-Lit) Acoustical Baffle
04 of 05Rev 12-2019
-
Aircraft Cable
Threaded Rod
Final view.7.
frasch.co | 682.200.3005
BAFL Installation (Non-Lit) Acoustical Baffle
05 of 05Rev 12-2019
-
frasch.co | 682.200.3005
BAFL Installation (Non-Lit) - Drywall /Concrete Ceiling Acoustical Baffle
Tools Needed
These installation suggestions consist of a common process for baffle installation. Installers should rely upon their own professional experience and understanding of their unique requirements to ensure a successful install.
Confirm your unistrut installation has been completed. Consult with a professional about a proper unistrut installation for your ceiling type (concrete vs. sheetrock).
Drill Screws Cable Cutter
Items Included
Baffle
01 of 05
(2) Aircraft Cable with Cone
Disclaimer: Concrete Anchor Bolt not included.
Rev 04-2020
-
Measure the distance between the two points on ceiling that will be holding the baffle. Match your hole location distance on the wood and mark it. Use a drill machine to make a 1/8” pilot hole for screws.
2.
frasch.co | 682.200.3005
Unwrap baffle from plastic wrap. Confirm baffle dimensions match your needs.
H
WL
1.
Make 1/8" pilot hole
Acoustical Baffle
02 of 05
BAFL Installation (Non-Lit) - Drywall /Concrete Ceiling
Rev 04-2020
-
Take out the screw nut from both side of the aircraft cable cone.3.
Place the screw nut on the pilot hole and use the driver to drive the dryawll screw through the screw nut on the wood.
4.
frasch.co | 682.200.3005
Acoustical Baffle
03 of 05
Detail
BAFL Installation (Non-Lit) - Drywall /Concrete Ceiling
Rev 04-2020
-
Screw the cone to the screw nut.6.
frasch.co | 682.200.3005
Acoustical Baffle
Drive the screw all the way so that it will flush with the screw nut.5.
Detail
BAFL Installation (Non-Lit) - Drywall /Concrete Ceiling
04 of 05Rev 04-2020
-
Drill and insert anchor bolt or sheet rock screw on the ceiling (need proper guidance from installer or architect before install) Disclaimer: Concrete Anchor Bolt not included.
Follow step 4-6 to attach the other side of the cone to hang the baffle.
7.
Finish the installation.8.
frasch.co | 682.200.3005
Acoustical Baffle BAFL Installation (Non-Lit) - Drywall /Concrete Ceiling
05 of 05Rev 04-2020
Sheetrock screw to the ceiling
To Ceiling
Sheetrock Screw
Cone
Aircraft Cable
Cone Nut
-
frasch.co | 682.200.3005
BAFL Installation (Non-Lit) - Unistrut InstallationAcoustical Baffle
Tools Needed
These installation suggestions consist of a common process for baffle installation. Installers should rely upon their own professional experience and understanding of their unique requirements to ensure a successful install.
Confirm your unistrut installation has been completed. Consult with a professional about a proper unistrut installation for your ceiling type (concrete vs. sheetrock).
Drill Hanger Bolt Driver(IVY classic)
UnistrutInstalled
Cable Cutter
Items Included
Baffle
(2) Hanger Bolt
(2) Griplock
(2) Coupling Nut
(2) Spring Nut Assembly
01 of 05Rev 12-2019
(2) Aircraft Cable or (2) Threaded Rod
-
If your baffle is pre-drilled with hanger bolts inserted, go to step 4.
If your baffles came without pre-drilled hanger bolts, follow this step:Measure the distance between the two unistruts that will be holding the baffle. Match your hole location distance to the distance of the unistruts. Use a drill machine to make a 1/8” pilot hole for hanger bolts.
2.
frasch.co | 682.200.3005
Unwrap baffle from plastic wrap. Confirm baffle dimensions match your needs.
H
WL
1.
Make 1/8" pilot hole
BAFL Installation (Non-Lit) - Unistrut InstallationAcoustical Baffle
02 of 05Rev 12-2019
-
Use the given hanger bolt driver tool to drive 1/4” - 20 hanger bolt on the pre-drilled hole leaving 3/4” exposed.
3.
Screw the coupling nut all the way on to the hanger bolt.4.
frasch.co | 682.200.3005
BAFL Installation (Non-Lit) - Unistrut InstallationAcoustical Baffle
03 of 05Rev 12-2019
-
Threaded Rod Specific Step ONLYCut 1/4” threaded rod at desired length and screw half way into the coupling nut.
6a.
frasch.co | 682.200.3005
BAFL Installation (Non-Lit) - Unistrut InstallationAcoustical Baffle
04 of 05Rev 12-2019
1. Twist the spring nut to go inside unistrut
2. Screw coupling nut to the spring nut
3. Screw griplock to the coupling nut
4. Aircraft cable will go to the griplock
1. Twist the spring nut to go inside unistrut
2. Screw coupling nut to the spring nut
3. Threaded rod will go to the coupling nut
Unistrut
Aircraft Cable Threaded Rod
Install Threaded Rod or Aircraft Cable from Unistrut5.
-
Final view.7.
frasch.co | 682.200.3005
Threaded Rod
BAFL Installation (Non-Lit) - Unistrut InstallationAcoustical Baffle
05 of 05Rev 12-2019
Aircraft Cable
Aircraft Cable Specific Step ONLY. Cut the excess cable using cable cutter.
6b.
-
frasch.co | 682.200.3005
Tools Needed
BAFL Installation (Conduit Clip) Acoustical Baffle These installation suggestions consist of a common process for baffle installation with Conduit Clips. Installers should rely upon their own professional experience and understanding of their unique requirements to ensure a successful install.
Unwrap Baffle from plastic Wrap. Confirm baffle dimensions match your needs.
H
WL
Drill
Items Included
1.
Baffle
Hanger Bolts
Conduit Clips
Nuts
01 of 06Rev 04-2021
-
If your baffle is pre-drilled with hanger bolts inserted, go to step 4.
If your baffles came without pre-drilled hanger bolts, follow this step:Measure and mark the distance of the desired location to place the Conduit Clips that will be holding the baffle. Use a drill machine to make a 1/8” pilot hole for hanger bolts.
2.
3. Use 1/4” - 20 hanger bolt driver tool to drive bolt into place, leaving half of the threads exposed.
frasch.co | 682.200.3005
Make 1/8" pilot hole
BAFL Installation (Conduit Clip) Acoustical Baffle
02 of 06Rev 04-2021
-
4. Screw the Nuts all the way on to the hanger bolt, flush against the wood.
frasch.co | 682.200.3005
BAFL Installation (Conduit Clip) Acoustical Baffle
03 of 06Rev 04-2021
-
Place the Conduit clips on top of the secured Nut, followed by another Nut to secure the clip in place. Twist to secure tightly.
5.
frasch.co | 682.200.3005
BAFL Installation (Conduit Clip) Acoustical Baffle
04 of 06Rev 04-2021
Nut
Nut
Conduit Clip
Hanger Bolt
-
6. Align the baffle with the Conduit Clips to the desired pipe location on the ceiling. Lock the clips around the pipe, then secure the clips by placing screw through the holes on top of the Conduit Clips. Finish securing the screw on the Conduit Clip with another Nut.
frasch.co | 682.200.3005
BAFL Installation (Conduit Clip) Acoustical Baffle
05 of 06Rev 04-2021
-
7. Final view.
frasch.co | 682.200.3005
BAFL Installation (Conduit Clip) Acoustical Baffle
06 of 06Rev 04-2021
Binder1.pdfBAFL Non Lit_without Unistrut Hardware.pdfBAFL_Installation_complete.pdf
BAFL Non Lit_with Conduit Clip